add DEVICE_POLLING option
[dragonfly.git] / sys / config / GENERIC
CommitLineData
984263bc 1#
8611e04d 2# GENERIC -- Generic kernel configuration file for DragonFly/i386
984263bc 3#
43800c56
HP
4# Check the LINT configuration file in sys/i386/conf, for an
5# exhaustive list of options.
984263bc 6#
03e8c2ec 7# $DragonFly: src/sys/config/GENERIC,v 1.28 2005/10/17 06:31:23 sephe Exp $
984263bc
MD
8
9machine i386
10cpu I386_CPU
11cpu I486_CPU
12cpu I586_CPU
13cpu I686_CPU
14ident GENERIC
15maxusers 0
16
1037a9ff 17makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
984263bc
MD
18
19options MATH_EMULATE #Support for x87 emulation
20options INET #InterNETworking
21options INET6 #IPv6 communications protocols
22options FFS #Berkeley Fast Filesystem
23options FFS_ROOT #FFS usable as root device [keep this!]
24options SOFTUPDATES #Enable FFS soft updates support
25options UFS_DIRHASH #Improve performance on big directories
26options MFS #Memory Filesystem
27options MD_ROOT #MD is a potential root device
28options NFS #Network Filesystem
29options NFS_ROOT #NFS usable as root device, NFS required
30options MSDOSFS #MSDOS Filesystem
31options CD9660 #ISO 9660 Filesystem
32options CD9660_ROOT #CD-ROM usable as root, CD9660 required
33options PROCFS #Process filesystem
34options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
db37e804 35options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
984263bc 36options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
03e8c2ec 37options DEVICE_POLLING
984263bc
MD
38options UCONSOLE #Allow users to grab the console
39options USERCONFIG #boot -c editor
40options VISUAL_USERCONFIG #visual boot -c editor
41options KTRACE #ktrace(1) support
42options SYSVSHM #SYSV-style shared memory
43options SYSVMSG #SYSV-style message queues
44options SYSVSEM #SYSV-style semaphores
45options P1003_1B #Posix P1003_1B real-time extensions
46options _KPOSIX_PRIORITY_SCHEDULING
47options ICMP_BANDLIM #Rate limit bad replies
48options KBD_INSTALL_CDEV # install a CDEV entry in /dev
49options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
50 # output. Adds ~128k to driver.
51options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
52 # output. Adds ~215k to driver.
53
54# To make an SMP kernel, the next two are needed
55#options SMP # Symmetric MultiProcessor Kernel
56#options APIC_IO # Symmetric (APIC) I/O
57
1037a9ff 58# Debugging for Development
78990d4c 59options DDB
863c2f64 60options DDB_TRACE
78990d4c
HP
61options INVARIANTS
62options INVARIANT_SUPPORT
1037a9ff
DR
63
64
65
984263bc
MD
66device isa
67device eisa
68device pci
69
70# Floppy drives
71device fdc0 at isa? port IO_FD1 irq 6 drq 2
72device fd0 at fdc0 drive 0
73device fd1 at fdc0 drive 1
74#
75# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
76# don't use the above line for fdc0 but the following one:
77#device fdc0
78
79# ATA and ATAPI devices
80device ata0 at isa? port IO_WD1 irq 14
81device ata1 at isa? port IO_WD2 irq 15
82device ata
83device atadisk # ATA disk drives
84device atapicd # ATAPI CDROM drives
85device atapifd # ATAPI floppy drives
86device atapist # ATAPI tape drives
a3e4c692 87device atapicam # Emulate ATAPI devices as SCSI via CAM
984263bc
MD
88options ATA_STATIC_ID #Static device numbering
89
90# SCSI Controllers
91device ahb # EISA AHA1742 family
92device ahc # AHA2940 and onboard AIC7xxx devices
93device ahd # AHA39320/29320 and onboard AIC79xx devices
94device amd # AMD 53C974 (Tekram DC-390(T))
95device isp # Qlogic family
96device mpt # LSI-Logic MPT/Fusion
97device ncr # NCR/Symbios Logic
98device sym # NCR/Symbios Logic (newer chipsets)
99options SYM_SETUP_LP_PROBE_MAP=0x40
100 # Allow ncr to attach legacy NCR devices when
101 # both sym and ncr are configured
102
103device adv0 at isa?
104device adw
105device bt0 at isa?
106device aha0 at isa?
107device aic0 at isa?
108
109device ncv # NCR 53C500
110device nsp # Workbit Ninja SCSI-3
111device stg # TMC 18C30/18C50
112
113# SCSI peripherals
114device scbus # SCSI bus (required)
115device da # Direct Access (disks)
116device sa # Sequential Access (tape etc)
117device cd # CD
118device pass # Passthrough device (direct SCSI access)
119
120# RAID controllers interfaced to the SCSI subsystem
121device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
122device dpt # DPT Smartcache - See LINT for options!
123device iir # Intel Integrated RAID
124device mly # Mylex AcceleRAID/eXtremeRAID
125device ciss # Compaq SmartRAID 5* series
126
127# RAID controllers
128device aac # Adaptec FSA RAID, Dell PERC2/PERC3
129#device aacp # SCSI passthrough for aac (requires CAM)
130device ida # Compaq Smart RAID
131device amr # AMI MegaRAID
132device mlx # Mylex DAC960 family
2d0f6098 133device twe # 3ware Escalade 7000/8000's
ab443496 134device twa # 3ware Escalade 9000's
b7ebf86e 135device pst # Promise Supertrack
984263bc
MD
136
137# atkbdc0 controls both the keyboard and the PS/2 mouse
138device atkbdc0 at isa? port IO_KBD
139device atkbd0 at atkbdc? irq 1 flags 0x1
140device psm0 at atkbdc? irq 12
141
142device vga0 at isa?
143
144# splash screen/screen saver
145pseudo-device splash
146
147# syscons is the default console driver, resembling an SCO console
148device sc0 at isa? flags 0x100
c42bc832 149options SC_PIXEL_MODE # add support for the raster text mode
984263bc 150
984263bc
MD
151device agp # support several AGP chipsets
152
153# Floating point support - do not disable.
154device npx0 at nexus? port IO_NPX irq 13
155
156# Power management support (see LINT for more options)
157device apm0 at nexus? disable flags 0x20 # Advanced Power Management
158
159# PCCARD (PCMCIA) support
666d2603
JS
160device pccard
161device cardbus
162device cbb
984263bc
MD
163
164# Serial (COM) ports
165device sio0 at isa? port IO_COM1 flags 0x10 irq 4
166device sio1 at isa? port IO_COM2 irq 3
167device sio2 at isa? disable port IO_COM3 irq 5
168device sio3 at isa? disable port IO_COM4 irq 9
169
170# Parallel port
171device ppc0 at isa? irq 7
172device ppbus # Parallel port bus (required)
173device lpt # Printer
174device plip # TCP/IP over parallel
175device ppi # Parallel port interface device
176#device vpo # Requires scbus and da
177
178
179# PCI Ethernet NICs.
180device de # DEC/Intel DC21x4x (``Tulip'')
181device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
182device txp # 3Com 3cR990 (``Typhoon'')
183device vx # 3Com 3c590, 3c595 (``Vortex'')
184
185# PCI Ethernet NICs that use the common MII bus controller code.
186# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
187device miibus # MII bus support
7f186839 188device bfe # Broadcom BCM440x 10/100 Ethernet
984263bc
MD
189device dc # DEC/Intel 21143 and various workalikes
190device fxp # Intel EtherExpress PRO/100B (82557, 82558)
191device pcn # AMD Am79C97x PCI 10/100 NICs
192device rl # RealTek 8129/8139
3e201bae 193device re # RealTek 8139C+/8169
984263bc
MD
194device sf # Adaptec AIC-6915 (``Starfire'')
195device sis # Silicon Integrated Systems SiS 900/SiS 7016
0db5ca13 196device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
984263bc
MD
197device ste # Sundance ST201 (D-Link DFE-550TX)
198device tl # Texas Instruments ThunderLAN
199device tx # SMC EtherPower II (83c170 ``EPIC'')
200device vr # VIA Rhine, Rhine II
201device wb # Winbond W89C840F
202device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
203device bge # Broadcom BCM570x (``Tigon III'')
204
205# ISA Ethernet NICs.
206# 'device ed' requires 'device miibus'
207device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
208device ex
209device ep
210device fe0 at isa? disable port 0x300
211# Xircom Ethernet
212device xe
acffed4b
JS
213# Generic 802.11 stack, used by wi
214device wlan
984263bc
MD
215# PRISM I IEEE 802.11b wireless NIC.
216device awi
217# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
218# exists only as a PCMCIA device, so there is no ISA attachment needed
219# and resources will always be dynamically assigned by the pccard code.
220device wi
221# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
222# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
223# mode (the factory default). If you set the switches on your ISA
224# card for a manually chosen I/O address and IRQ, you must specify
225# those parameters here.
226device an
227# The probe order of these is presently determined by i386/isa/isa_compat.c.
228device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
229#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
230device lnc0 at isa? disable port 0x280 irq 10 drq 0
231device cs0 at isa? disable port 0x300
232device sn0 at isa? disable port 0x300 irq 10
233
234# Pseudo devices - the number indicates how many units to allocate.
235pseudo-device loop # Network loopback
236pseudo-device ether # Ethernet support
237pseudo-device sl 1 # Kernel SLIP
238pseudo-device ppp 1 # Kernel PPP
239pseudo-device tun # Packet tunnel.
240pseudo-device pty # Pseudo-ttys (telnet etc)
241pseudo-device md # Memory "disks"
242pseudo-device gif # IPv6 and IPv4 tunneling
243pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
244
245# The `bpf' pseudo-device enables the Berkeley Packet Filter.
246# Be aware of the administrative consequences of enabling this!
247pseudo-device bpf #Berkeley packet filter
248
acffed4b
JS
249pseudo-device crypto # core crypto support, used by wlan
250
984263bc
MD
251# USB support
252device uhci # UHCI PCI->USB interface
253device ohci # OHCI PCI->USB interface
254device usb # USB Bus (required)
255device ugen # Generic
256device uhid # "Human Interface Devices"
257device ukbd # Keyboard
258device ulpt # Printer
259device umass # Disks/Mass storage - Requires scbus and da
260device ums # Mouse
261device uscanner # Scanners
262device urio # Diamond Rio MP3 Player
263# USB Ethernet, requires mii
264device aue # ADMtek USB ethernet
204496c7 265device axe # ASIX Electronics USB Ethernet
984263bc
MD
266device cue # CATC USB ethernet
267device kue # Kawasaki LSI USB ethernet
3c374c15 268device rue # RealTek 8150 based USB ethernet
984263bc
MD
269
270# FireWire support
271device firewire # FireWire bus code
272device sbp # SCSI over FireWire (Requires scbus and da)
273device fwe # Ethernet over FireWire (non-standard!)