Remove kerberosIV a.k.a. eBones. It has served well, but definately
[dragonfly.git] / Makefile.inc1
CommitLineData
984263bc
MD
1#
2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
9f3906fd 3# $DragonFly: src/Makefile.inc1,v 1.6 2003/08/08 19:22:45 dillon Exp $
984263bc
MD
4#
5# Make command line options:
984263bc
MD
6# -DMAKE_KERBEROS5 to build Kerberos5
7# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
8# -DNOCLEAN do not clean at all
9# -DNOCRYPT will prevent building of crypt versions
10# -DNOMAN do not build the manual pages
11# -DNOPROFILE do not build profiled libraries
984263bc
MD
12# -DNOGAMES do not go into games subdir
13# -DNOSHARE do not go into share subdir
14# -DNOINFO do not make or install info files
15# -DNOLIBC_R do not build libc_r.
16# -DNO_FORTRAN do not build g77 and related libraries.
17# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
18# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
19# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
20# -DNO_PORTSUPDATE do not update ports in ${MAKE} update
21# -DNO_DOCUPDATE do not update doc in ${MAKE} update
22# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
23# TARGET_ARCH="arch" to crossbuild world to a different arch
24
25#
26# The intended user-driven targets are:
27# buildworld - rebuild *everything*, including glue to help do upgrades
28# installworld- install everything built by "buildworld"
29# update - convenient way to update your source tree (eg: sup/cvs)
30# most - build user commands, no libraries or include files
31# installmost - install user commands, no libraries or include files
32#
33# Standard targets (not defined here) are documented in the makefiles in
34# /usr/share/mk. These include:
35# obj depend all install clean cleandepend cleanobj
36
37# Put initial settings here.
38SUBDIR=
39
40# We must do share/info early so that installation of info `dir'
41# entries works correctly. Do it first since it is less likely to
42# grow dependencies on include and lib than vice versa.
43.if exists(${.CURDIR}/share/info)
44SUBDIR+= share/info
45.endif
46
47# We must do include and lib early so that the perl *.ph generation
48# works correctly as it uses the header files installed by this.
49.if exists(${.CURDIR}/include)
50SUBDIR+= include
51.endif
52.if exists(${.CURDIR}/lib)
53SUBDIR+= lib
54.endif
55
56.if exists(${.CURDIR}/bin)
57SUBDIR+= bin
58.endif
59.if exists(${.CURDIR}/games) && !defined(NOGAMES)
60SUBDIR+= games
61.endif
62.if exists(${.CURDIR}/gnu)
63SUBDIR+= gnu
64.endif
984263bc
MD
65.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
66 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
67SUBDIR+= kerberos5
68.endif
69.if exists(${.CURDIR}/libexec)
70SUBDIR+= libexec
71.endif
72.if exists(${.CURDIR}/sbin)
73SUBDIR+= sbin
74.endif
de347b31 75.if exists(${.CURDIR}/secure) && !defined(NOCRYPT)
984263bc
MD
76SUBDIR+= secure
77.endif
78.if exists(${.CURDIR}/share) && !defined(NOSHARE)
79SUBDIR+= share
80.endif
81.if exists(${.CURDIR}/sys)
82SUBDIR+= sys
83.endif
84.if exists(${.CURDIR}/usr.bin)
85SUBDIR+= usr.bin
86.endif
87.if exists(${.CURDIR}/usr.sbin)
88SUBDIR+= usr.sbin
89.endif
90
91# etc must be last for "distribute" to work
92.if exists(${.CURDIR}/etc)
93SUBDIR+= etc
94.endif
95
96# These are last, since it is nice to at least get the base system
97# rebuilt before you do them.
98.if defined(LOCAL_DIRS)
99.for _DIR in ${LOCAL_DIRS}
100.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
101SUBDIR+= ${_DIR}
102.endif
103.endfor
104.endif
105
106.if defined(SUBDIR_OVERRIDE)
107SUBDIR= ${SUBDIR_OVERRIDE}
108.endif
109
110.if defined(NOCLEANDIR)
111CLEANDIR= clean cleandepend
112.else
113CLEANDIR= cleandir
114.endif
115
116SUP?= /usr/local/bin/cvsup
117SUPFLAGS?= -g -L 2 -P -
118.if defined(SUPHOST)
119SUPFLAGS+= -h ${SUPHOST}
120.endif
121
122MAKEOBJDIRPREFIX?= /usr/obj
123TARGET_ARCH?= ${MACHINE_ARCH}
124.if ${TARGET_ARCH} == ${MACHINE_ARCH}
125TARGET?= ${MACHINE}
126.else
127TARGET?= ${TARGET_ARCH}
128.endif
129.if make(buildworld)
130BUILD_ARCH!= sysctl -n hw.machine_arch
131.if ${MACHINE_ARCH} != ${BUILD_ARCH}
132.error To cross-build, set TARGET_ARCH.
133.endif
134.endif
135.if ${MACHINE} == ${TARGET}
136OBJTREE= ${MAKEOBJDIRPREFIX}
137.else
138OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET}
139.endif
140WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
141# /usr/games added for fortune which depend on strfile
142STRICTTMPPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
143TMPPATH= ${STRICTTMPPATH}:${PATH}
144OBJFORMAT_PATH?= /usr/libexec
145
146TMPDIR?= /tmp
147TMPPID!= echo $$$$
148INSTALLTMP= ${TMPDIR}/install.${TMPPID}
149
150#
151# Building a world goes through the following stages
152#
153# 1. bootstrap-tool stage [BMAKE]
154# This stage is responsible for creating programs that
155# are needed for backward compatibility reasons. They
156# are not built as cross-tools.
157# 2. build-tool stage [TMAKE]
158# This stage is responsible for creating the object
159# tree and building any tools that are needed during
160# the build process.
161# 3. cross-tool stage [XMAKE]
162# This stage is responsible for creating any tools that
163# are needed for cross-builds. A cross-compiler is one
164# of them.
165# 4. world stage [WMAKE]
166# This stage actually builds the world.
167# 5. install stage (optional) [IMAKE]
168# This stage installs a previously built world.
169#
170
171# Common environment for world related stages
172CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \
173 MACHINE_ARCH=${TARGET_ARCH} \
174 MACHINE=${TARGET} \
175 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
176 PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.00503 \
177 GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
178 GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
179 GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
180
181# bootstrap-tool stage
182BMAKEENV= MAKEOBJDIRPREFIX=${WORLDTMP} \
183 DESTDIR= \
184 INSTALL="sh ${.CURDIR}/tools/install.sh"
185BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
186 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
187 -DNO_WERROR
188
189# build-tool stage
190TMAKEENV= MAKEOBJDIRPREFIX=${OBJTREE} \
191 DESTDIR= \
192 INSTALL="sh ${.CURDIR}/tools/install.sh"
193TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING
194
195# cross-tool stage
196XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
197
198# world stage
199WMAKEENV= ${CROSSENV} \
200 DESTDIR=${WORLDTMP} \
201 INSTALL="sh ${.CURDIR}/tools/install.sh" \
202 PATH=${TMPPATH}
203WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
204
205# install stage
206IMAKEENV= ${CROSSENV} \
207 PATH=${STRICTTMPPATH}:${INSTALLTMP}
208IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
209
210# kernel stage
211KMAKEENV= ${WMAKEENV} \
212 OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH}
213
214USRDIRS= usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
215 usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc \
216 usr/share/dict \
217 usr/share/groff_font/devX100 \
218 usr/share/groff_font/devX100-12 \
219 usr/share/groff_font/devX75 \
220 usr/share/groff_font/devX75-12 \
221 usr/share/groff_font/devascii \
222 usr/share/groff_font/devcp1047 \
223 usr/share/groff_font/devdvi \
224 usr/share/groff_font/devhtml \
225 usr/share/groff_font/devkoi8-r \
226 usr/share/groff_font/devlatin1 \
227 usr/share/groff_font/devlbp \
228 usr/share/groff_font/devlj4 \
229 usr/share/groff_font/devps \
230 usr/share/groff_font/devutf8 \
231 usr/share/tmac/mdoc usr/share/tmac/mm
232
38a690d7
MD
233# XXX remove in favor of the BSD.include.dist mtree that we already have.
234#
235INCDIRS= arpa dev g++/std isc libmilter objc openssl \
236 protocols readline rpc rpcsvc security
984263bc
MD
237
238#
239# buildworld
240#
241# Attempt to rebuild the entire system, with reasonable chance of
242# success, regardless of how old your existing system is.
243#
244_worldtmp:
245 @echo
246 @echo "--------------------------------------------------------------"
247 @echo ">>> Rebuilding the temporary build tree"
248 @echo "--------------------------------------------------------------"
249.if !defined(NOCLEAN)
250 rm -rf ${WORLDTMP}
251.else
252 # XXX - These two can depend on any header file.
253 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
254 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
255.endif
256.for _dir in ${USRDIRS}
257 mkdir -p ${WORLDTMP}/${_dir}
258.endfor
259.for _dir in ${INCDIRS}
260 mkdir -p ${WORLDTMP}/usr/include/${_dir}
261.endfor
262 ln -sf ${.CURDIR}/sys ${WORLDTMP}
263_bootstrap-tools:
264 @echo
265 @echo "--------------------------------------------------------------"
266 @echo ">>> stage 1: bootstrap tools"
267 @echo "--------------------------------------------------------------"
268 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
269_cleanobj:
270.if !defined(NOCLEAN)
271 @echo
272 @echo "--------------------------------------------------------------"
273 @echo ">>> stage 2: cleaning up the object tree"
274 @echo "--------------------------------------------------------------"
275 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
276.endif
277_obj:
278 @echo
279 @echo "--------------------------------------------------------------"
280 @echo ">>> stage 2: rebuilding the object tree"
281 @echo "--------------------------------------------------------------"
282 cd ${.CURDIR}; ${WMAKE} par-obj
283_build-tools:
284 @echo
285 @echo "--------------------------------------------------------------"
286 @echo ">>> stage 2: build tools"
287 @echo "--------------------------------------------------------------"
288 cd ${.CURDIR}; ${TMAKE} build-tools
289_cross-tools:
290 @echo
291 @echo "--------------------------------------------------------------"
292 @echo ">>> stage 3: cross tools"
293 @echo "--------------------------------------------------------------"
294 cd ${.CURDIR}; ${XMAKE} cross-tools
295_includes:
296 @echo
297 @echo "--------------------------------------------------------------"
298 @echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
299 @echo "--------------------------------------------------------------"
300 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
301_libraries:
302 @echo
303 @echo "--------------------------------------------------------------"
304 @echo ">>> stage 4: building libraries"
305 @echo "--------------------------------------------------------------"
306 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
307_depend:
308 @echo
309 @echo "--------------------------------------------------------------"
310 @echo ">>> stage 4: make dependencies"
311 @echo "--------------------------------------------------------------"
312 cd ${.CURDIR}; ${WMAKE} par-depend
313everything:
314 @echo
315 @echo "--------------------------------------------------------------"
316 @echo ">>> stage 4: building everything.."
317 @echo "--------------------------------------------------------------"
318 cd ${.CURDIR}; ${WMAKE} all
319
320
321WMAKE_TGTS=
322.if !defined(SUBDIR_OVERRIDE)
323WMAKE_TGTS+= _worldtmp _bootstrap-tools
324.endif
325WMAKE_TGTS+= _cleanobj _obj _build-tools
326.if !defined(SUBDIR_OVERRIDE)
327WMAKE_TGTS+= _cross-tools
328.endif
329WMAKE_TGTS+= _includes _libraries _depend everything
330
331buildworld: ${WMAKE_TGTS}
332.ORDER: ${WMAKE_TGTS}
333
334#
335# installcheck
336#
337# Checks to be sure system is ready for installworld
338#
339installcheck:
340.if !defined(NO_SENDMAIL)
341 @if ! `grep -q '^smmsp:' /etc/passwd`; then \
342 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
343 false; \
344 fi
345 @if ! `grep -q '^smmsp:' /etc/group`; then \
346 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
347 false; \
348 fi
349.endif
350
351#
352# distributeworld
353#
354# Distributes everything compiled by a `buildworld'.
355#
356# installworld
357#
358# Installs everything compiled by a 'buildworld'.
359#
360distributeworld installworld: installcheck
361 mkdir -p ${INSTALLTMP}
362 for prog in [ awk cap_mkdb cat chflags chmod chown \
363 date echo egrep find grep \
364 ln make makewhatis mkdir mtree mv perl pwd_mkdb rm sed sh sysctl \
365 test true uname wc zic; do \
366 cp `which $$prog` ${INSTALLTMP}; \
367 done
368 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
369 rm -rf ${INSTALLTMP}
370
371#
372# reinstall
373#
374# If you have a build server, you can NFS mount the source and obj directories
375# and do a 'make reinstall' on the *client* to install new binaries from the
376# most recent server build.
377#
378reinstall:
379 @echo "--------------------------------------------------------------"
380 @echo ">>> Making hierarchy"
381 @echo "--------------------------------------------------------------"
382 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
383 @echo
384 @echo "--------------------------------------------------------------"
385 @echo ">>> Installing everything.."
386 @echo "--------------------------------------------------------------"
387 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
388.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
389 @echo
390 @echo "--------------------------------------------------------------"
391 @echo ">>> Rebuilding man page indices"
392 @echo "--------------------------------------------------------------"
393 cd ${.CURDIR}/share/man; ${MAKE} makedb
394.endif
395
396redistribute:
397 @echo "--------------------------------------------------------------"
398 @echo ">>> Distributing everything.."
399 @echo "--------------------------------------------------------------"
400 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
401
402#
403# buildkernel and installkernel
404#
405# Which kernels to build and/or install is specified by setting
406# KERNCONF. If not defined a GENERIC kernel is built/installed.
407# Only the existing (depending TARGET) config files are used
408# for building kernels and only the first of these is designated
409# as the one being installed.
410#
411# Note that we have to use TARGET instead of TARGET_ARCH when
412# we're in kernel-land. Since only TARGET_ARCH is (expected) to
413# be set to cross-build, we have to make sure TARGET is set
414# properly.
415
416.if !defined(KERNCONF) && defined(KERNEL)
417KERNCONF= ${KERNEL}
418KERNWARN= yes
419.else
420KERNCONF?= GENERIC
421.endif
422INSTKERNNAME?= kernel
423
424KRNLSRCDIR= ${.CURDIR}/sys
425KRNLCONFDIR= ${KRNLSRCDIR}/${TARGET}/conf
426KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
427KERNCONFDIR?= ${KRNLCONFDIR}
428
429BUILDKERNELS=
430INSTALLKERNEL=
431.for _kernel in ${KERNCONF}
432.if exists(${KERNCONFDIR}/${_kernel})
433BUILDKERNELS+= ${_kernel}
434.if empty(INSTALLKERNEL)
435INSTALLKERNEL= ${_kernel}
436.endif
437.endif
438.endfor
439
440#
441# buildkernel
442#
443# Builds all kernels defined by BUILDKERNELS.
444#
445buildkernel:
446.if empty(BUILDKERNELS)
447 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
448 @false
449.endif
450.if defined(KERNWARN)
451 @echo "--------------------------------------------------------------"
452 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
453 @echo "--------------------------------------------------------------"
454 @sleep 3
455.endif
456 @echo
457.for _kernel in ${BUILDKERNELS}
458 @echo "--------------------------------------------------------------"
459 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
460 @echo "--------------------------------------------------------------"
461 @echo "===> ${_kernel}"
462 mkdir -p ${KRNLOBJDIR}
463.if !defined(NO_KERNELCONFIG)
464 cd ${KRNLCONFDIR}; \
465 PATH=${TMPPATH} \
466 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
467 ${KERNCONFDIR}/${_kernel}
468.endif
469.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
470 cd ${KRNLOBJDIR}/${_kernel}; \
471 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} -DNO_MODULES clean
472.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules)
473 cd ${KRNLOBJDIR}/${_kernel}; \
474 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} cleandir
475.endif
476.endif
477 cd ${KRNLOBJDIR}/${_kernel}; \
9f3906fd
MD
478 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
479 ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
984263bc
MD
480.if !defined(NO_KERNELDEPEND)
481 cd ${KRNLOBJDIR}/${_kernel}; \
482 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
483.endif
484 cd ${KRNLOBJDIR}/${_kernel}; \
485 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
486 @echo "--------------------------------------------------------------"
487 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
488 @echo "--------------------------------------------------------------"
489.endfor
490
491#
492# installkernel
493#
494# Install the kernel defined by INSTALLKERNEL
495#
496installkernel reinstallkernel:
497 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
498 ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
499
500#
501# update
502#
503# Update the source tree, by running sup and/or running cvs to update to the
504# latest copy.
505#
506update:
507.if defined(SUP_UPDATE)
508 @echo "--------------------------------------------------------------"
509 @echo ">>> Running ${SUP}"
510 @echo "--------------------------------------------------------------"
511.if defined(SUPFILE)
512 @${SUP} ${SUPFLAGS} ${SUPFILE}
513.endif
514.if defined(SUPFILE1)
515 @${SUP} ${SUPFLAGS} ${SUPFILE1}
516.endif
517.if defined(SUPFILE2)
518 @${SUP} ${SUPFLAGS} ${SUPFILE2}
519.endif
520.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
521 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
522.endif
523.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
524 @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
525.endif
526.endif
527.if defined(CVS_UPDATE)
528 @echo "--------------------------------------------------------------"
529 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
530 @echo "--------------------------------------------------------------"
531 cd ${.CURDIR}; cvs -q update -rRELENG_4 -P -d
532.endif
533
534#
535# most
536#
537# Build most of the user binaries on the existing system libs and includes.
538#
539most:
540 @echo "--------------------------------------------------------------"
541 @echo ">>> Building programs only"
542 @echo "--------------------------------------------------------------"
543.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
544 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all
545.endfor
546
547#
548# installmost
549#
550# Install the binaries built by the 'most' target. This does not include
551# libraries or include files.
552#
553installmost:
554 @echo "--------------------------------------------------------------"
555 @echo ">>> Installing programs only"
556 @echo "--------------------------------------------------------------"
557.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
558 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install
559.endfor
560
561#
562# ------------------------------------------------------------------------
563#
564# From here onwards are utility targets used by the 'make world' and
565# related targets. If your 'world' breaks, you may like to try to fix
566# the problem and manually run the following targets to attempt to
567# complete the build. Beware, this is *not* guaranteed to work, you
568# need to have a pretty good grip on the current state of the system
569# to attempt to manually finish it. If in doubt, 'make world' again.
570#
571
572#
573# bootstrap-tools: Build tools needed for compatibility
574#
575.if exists(${.CURDIR}/games) && !defined(NOGAMES)
576_strfile= games/fortune/strfile
577.endif
578
579bootstrap-tools:
580.for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef \
581 usr.bin/uudecode usr.bin/xinstall \
582 usr.sbin/config \
583 gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo
584 ${ECHODIR} "===> ${_tool}"; \
585 cd ${.CURDIR}/${_tool}; \
586 ${MAKE} DIRPRFX=${_tool}/ obj; \
587 ${MAKE} DIRPRFX=${_tool}/ depend; \
588 ${MAKE} DIRPRFX=${_tool}/ all; \
589 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
590.endfor
591
592#
593# build-tools: Build special purpose build tools
594#
595.if exists(${.CURDIR}/games) && !defined(NOGAMES)
596_games= games/adventure games/hack games/phantasia
597.endif
598
599.if exists(${.CURDIR}/share) && !defined(NOSHARE)
600_share= share/syscons/scrnmaps
601.endif
602
603.if !defined(NO_FORTRAN)
604_fortran= gnu/usr.bin/cc/f771
605.endif
606
607.if !defined(NOPERL)
608_perl= gnu/usr.bin/perl/miniperl
609.endif
610
984263bc
MD
611.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
612 !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
613_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
614 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
615.endif
616
617.if defined(RELEASEDIR)
618_sysinstall= release/sysinstall
619.endif
620
621build-tools:
622.for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
623 ${_perl} ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \
624 usr.bin/awk usr.bin/file ${_sysinstall}
625 ${ECHODIR} "===> ${_tool}"; \
626 cd ${.CURDIR}/${_tool}; \
627 ${MAKE} DIRPRFX=${_tool}/ obj; \
628 ${MAKE} DIRPRFX=${_tool}/ build-tools
629.endfor
630
631#
632# cross-tools: Build cross-building tools
633#
634.if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
635_elf2exe= usr.sbin/elf2exe
636.endif
637
638.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
639_btxld= usr.sbin/btxld
640.endif
641
642cross-tools:
643.for _tool in ${_btxld} ${_elf2exe} usr.bin/genassym usr.bin/gensetdefs \
644 gnu/usr.bin/binutils usr.bin/objformat usr.sbin/crunch/crunchide \
645 gnu/usr.bin/cc
646 ${ECHODIR} "===> ${_tool}"; \
647 cd ${.CURDIR}/${_tool}; \
648 ${MAKE} DIRPRFX=${_tool}/ obj; \
649 ${MAKE} DIRPRFX=${_tool}/ depend; \
650 ${MAKE} DIRPRFX=${_tool}/ all; \
651 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
652.endfor
653
654#
655# hierarchy - ensure that all the needed directories are present
656#
657hierarchy:
658 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
659
660#
661# libraries - build all libraries, and install them under ${DESTDIR}.
662#
663# The list of libraries with dependents (${_prebuild_libs}) and their
664# interdependencies (__L) are built automatically by the
665# ${.CURDIR}/tools/make_libdeps.sh script.
666#
667libraries:
668 cd ${.CURDIR}; \
669 ${MAKE} -f Makefile.inc1 _startup_libs; \
670 ${MAKE} -f Makefile.inc1 _prebuild_libs; \
671 ${MAKE} -f Makefile.inc1 _generic_libs;
672
673# These dependencies are not automatically generated:
674#
675# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
676# shared libraries for ELF.
677#
678_startup_libs= gnu/lib/csu gnu/lib/libgcc
679.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-${OBJFORMAT})
680_startup_libs+= lib/csu/${MACHINE_ARCH}-${OBJFORMAT}
681.else
682_startup_libs+= lib/csu/${MACHINE_ARCH}
683.endif
684
685_prebuild_libs=
686
687_generic_libs= gnu/lib
688
689.if !defined(NOPERL)
690_generic_libs+= gnu/usr.bin/perl/libperl
691.endif
692
693.if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
694_prebuild_libs+= kerberos5/lib/libasn1
695_prebuild_libs+= kerberos5/lib/libgssapi
696_prebuild_libs+= kerberos5/lib/libkrb5
697_prebuild_libs+= kerberos5/lib/libroken
698_generic_libs+= kerberos5/lib
699.endif
700
984263bc
MD
701_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
702 lib/libncurses lib/libopie lib/libradius lib/libskey \
703 lib/libtacplus lib/libutil \
704 lib/libz lib/msun
705
706lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
707lib/libskey__L: lib/libcrypt__L lib/libmd__L
708
709_generic_libs+= lib
710
de347b31 711.if !defined(NOCRYPT)
984263bc
MD
712.if !defined(NO_OPENSSL)
713_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
714.if !defined(NO_OPENSSH)
715_prebuild_libs+= secure/lib/libssh
716secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
717.endif
718.endif
719_generic_libs+= secure/lib
720.endif
721
722_generic_libs+= usr.bin/lex/lib
723
724.if ${MACHINE_ARCH} == "i386"
725_generic_libs+= usr.sbin/pcvt/keycap
726.endif
727
728.for _lib in ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
729${_lib}__L: .PHONY
730.if exists(${.CURDIR}/${_lib})
731 ${ECHODIR} "===> ${_lib}"; \
732 cd ${.CURDIR}/${_lib}; \
733 ${MAKE} DIRPRFX=${_lib}/ depend; \
734 ${MAKE} DIRPRFX=${_lib}/ all; \
735 ${MAKE} DIRPRFX=${_lib}/ install
736.endif
737.endfor
738
739_startup_libs: ${_startup_libs:S/$/__L/}
740_prebuild_libs: ${_prebuild_libs:S/$/__L/}
741_generic_libs: ${_generic_libs:S/$/__L/}
742
743.for __target in clean cleandepend cleandir depend includes obj
744.for entry in ${SUBDIR}
745${entry}.${__target}__D: .PHONY
746 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
747 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
748 edir=${entry}.${MACHINE_ARCH}; \
749 cd ${.CURDIR}/$${edir}; \
750 else \
751 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
752 edir=${entry}; \
753 cd ${.CURDIR}/$${edir}; \
754 fi; \
755 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
756.endfor
757par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
758.endfor
759
760.include <bsd.subdir.mk>