mandoc(1): Update to 1.9.19.
[dragonfly.git] / etc / gettytab
CommitLineData
984263bc 1# $FreeBSD: src/etc/gettytab,v 1.17.2.3 2001/09/27 08:47:55 murray Exp $
f95025e8 2# $DragonFly: src/etc/gettytab,v 1.4 2008/08/31 17:37:19 swildner Exp $
984263bc
MD
3# from: @(#)gettytab 5.14 (Berkeley) 3/27/91
4#
5# Most of the table entries here are just copies of the old getty table,
6# it is by no means certain, or even likely, that any of them are optimal
7# for any purpose whatever. Nor is it likely that more than a couple are
8# even correct.
9#
10# The default gettytab entry, used to set defaults for all other
11# entries, and in cases where getty is called with no table name.
12#
13# cb, ce and ck are desirable on most crt's. The non-crt entries need to
14# be changed to turn them off (:cb@:ce@:ck@:).
15#
16# lc should always be on; it's a remainder of some stone age when there
17# have been terminals around not being able of handling lower-case
18# characters. Those terminals aren't supported any longer, but getty is
19# `smart' about them by default.
20#
21# Parity defaults to even, but the Pc entry and all the `std' entries
22# specify no parity. The different parities are:
23# (none): same as even except -inpck instead of inpck for login.
24# ep: getty will use raw mode (cs8 -parenb) (unless rw is set) and
25# fake parity. login will use even parity (cs7 parenb -parodd).
26# op: same as ep except odd parity (cs7 parenb parodd) for login.
27# op overrides ep.
28# ap: same as ep except -inpck instead of inpck for login.
29# ap overrides op and ep.
30# np: 1. don't fake parity in getty. The fake parity garbles
31# characters on non-terminals (like pccons) that don't
32# support parity. It would probably better for getty not to
33# try to fake parity. It could just use cbreak mode so as
34# not to force cs8 and let the hardware handle the parity.
35# login has to be rely on the hardware anyway.
36# 2. set PASS8, giving cs8 -parenb -istrip -inpck.
37# np:ep: same as np except inpck.
38# np:op: same as np:ep except for parodd (but parodd is overridden).
39# np:ap: same as np except istrip.
40#
41default:\
42 :cb:ce:ck:lc:fd#1000:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:\
43 :if=/etc/issue:
44
45#
46# Fixed speed entries
47#
48# The "std.NNN" names are known to the special case
49# portselector code in getty, however they can
50# be assigned to any table desired.
51# The "NNN-baud" names are known to the special case
52# autobaud code in getty, and likewise can
53# be assigned to any table desired (hopefully the same speed).
54#
55a|std.110|110-baud:\
56 :np:nd#1:cd#1:uc:sp#110:
57b|std.134|134.5-baud:\
58 :np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl:
591|std.150|150-baud:\
60 :np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 :
61c|std.300|300-baud:\
62 :np:nd#1:cd#1:sp#300:
63d|std.600|600-baud:\
64 :np:nd#1:cd#1:sp#600:
65f|std.1200|1200-baud:\
66 :np:fd#1:sp#1200:
676|std.2400|2400-baud:\
68 :np:sp#2400:
697|std.4800|4800-baud:\
70 :np:sp#4800:
712|std.9600|9600-baud:\
72 :np:sp#9600:
73g|std.19200|19200-baud:\
74 :np:sp#19200:
75std.38400|38400-baud:\
76 :np:sp#38400:
77std.57600|57600-baud:\
78 :np:sp#57600:
79std.115200|115200-baud:\
80 :np:sp#115200:
81std.230400|230400-baud:\
82 :np:sp#230400:
83
84#
85# Entry specifying explicit device settings. See termios(4) and
86# /usr/include/termios.h, too. The entry forces the tty into
87# CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control.
88#
89# cflags: CLOCAL | HUPCL | CREAD | CS8
90# oflags: OPOST | ONLCR | OXTABS
91# iflags: IXOFF | IXON | ICRNL | IGNPAR
92# lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE
93#
94# The `0' flags don't have input enabled. The `1' flags don't echo.
95# (Echoing is done inside getty itself.)
96#
97local.9600|CLOCAL tty @ 9600 Bd:\
98 :c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:\
99 :o0#0x00000007:o1#0x00000002:o2#0x00000007:\
100 :i0#0x00000704:i1#0x00000000:i2#0x00000704:\
101 :l0#0x000005cf:l1#0x00000000:l2#0x000005cf:\
102 :sp#9600:
103
104#
105# Dial in rotary tables, speed selection via 'break'
106#
1070|d300|Dial-300:\
108 :nx=d1200:cd#2:sp#300:
109d1200|Dial-1200:\
110 :nx=d150:fd#1:sp#1200:
111d150|Dial-150:\
112 :nx=d110:lm@:tc=150-baud:
113d110|Dial-110:\
114 :nx=d300:tc=300-baud:
115
116#
117# Fast dialup terminals, 2400/1200/300 rotary (can start either way)
118#
119D2400|d2400|Fast-Dial-2400:\
120 :nx=D1200:tc=2400-baud:
1213|D1200|Fast-Dial-1200:\
122 :nx=D300:tc=1200-baud:
1235|D300|Fast-Dial-300:\
124 :nx=D2400:tc=300-baud:
125
126#
127#telebit (19200)
128#
129t19200:\
130 :nx=t2400:tc=19200-baud:
131t2400:\
132 :nx=t1200:tc=2400-baud:
133t1200:\
134 :nx=t19200:tc=1200-baud:
135
136#
137#telebit (9600)
138#
139t9600:\
140 :nx=t2400a:tc=9600-baud:
141t2400a:\
142 :nx=t1200a:tc=2400-baud:
143t1200a:\
144 :nx=t9600:tc=1200-baud:
145
146#
147# Odd special case terminals
148#
149-|tty33|asr33|Pity the poor user of this beast:\
150 :tc=110-baud:
151
1524|Console|Console Decwriter II:\
153 :nd@:cd@:rw:tc=300-baud:
154
155e|Console-1200|Console Decwriter III:\
156 :fd@:nd@:cd@:rw:tc=1200-baud:
157
158i|Interdata console:\
159 :uc:sp#0:
160
161l|lsi chess terminal:\
162 :sp#300:
163
164X|Xwindow|X window system:\
165 :fd@:nd@:cd@:rw:sp#9600:
166
167P|Pc|Pc console:\
168 :ht:np:sp#115200:
169
170#
171# Wierdo special case for fast crt's with hardcopy devices
172#
1738|T9600|CRT with hardcopy:\
174 :nx=T300:tc=9600-baud:
1759|T300|CRT with hardcopy (300):\
176 :nx=T9600:tc=300-baud:
177
178#
179# Plugboard, and misc other terminals
180#
181plug-9600|Plugboard-9600:\
182 :pf#1:tc=9600-baud:
183p|P9600|Plugboard-9600-rotary:\
184 :pf#1:nx=P300:tc=9600-baud:
185q|P300|Plugboard-300:\
186 :pf#1:nx=P1200:tc=300-baud:
187r|P1200|Plugboard-1200:\
188 :pf#1:nx=P9600:tc=1200-baud:
189
190#
191# XXXX Port selector
192#
193s|DSW|Port Selector:\
194 :ps:sp#2400:
195
196#
197# Auto-baud speed detect entry for Micom 600.
198# Special code in getty will switch this out
199# to one of the NNN-baud entries.
200#
201A|Auto-baud:\
202 :ab:sp#2400:f0#040:
203
204#
205# autologin - automatically log in as root
206#
207
208autologin|al.9600:\
209 :al=root:tc=std.9600:
5aec2a58
SW
210al.19200:\
211 :al=root:tc=std.19200:
212al.38400:\
213 :al=root:tc=std.38400:
214al.57600:\
215 :al=root:tc=std.57600:
216al.115200:\
217 :al=root:tc=std.115200:
218al.230400:\
219 :al=root:tc=std.230400:
f95025e8
SW
220al.Pc:\
221 :al=root:tc=Pc
984263bc 222
5aec2a58 223#
984263bc
MD
224# Entries for 3-wire serial terminals. These don't supply carrier, so
225# clocal needs to be set, and crtscts needs to be unset.
226#
2273wire.9600|9600-3wire:\
228 :np:nc:sp#9600:
5aec2a58
SW
2293wire.19200|19200-3wire:\
230 :np:nc:sp#19200:
984263bc
MD
2313wire.38400|38400-3wire:\
232 :np:nc:sp#38400:
2333wire.57600|57600-3wire:\
234 :np:nc:sp#57600:
2353wire.115200|115200-3wire:\
236 :np:nc:sp#115200:
2373wire.230400|230400-3wire:\
238 :np:nc:sp#230400: