GENERIC_SMP/X86_64_GENERIC_SMP: Properly sync for the APIC_IO removal.
[dragonfly.git] / sys / config / X86_64_GENERIC_SMP
CommitLineData
6991fb65
MD
1#
2# X86_64_GENERIC_SMP -- Generic kernel configuration file for DragonFly/x86_64
3#
4# Check the LINT configuration file in sys/config, for an
5# exhaustive list of options.
6#
7platform pc64
8machine x86_64
9machine_arch x86_64
10cpu HAMMER_CPU
11ident X86_64_GENERIC_SMP
12maxusers 0
13
14makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
15
16options INET #InterNETworking
17options INET6 #IPv6 communications protocols
18options HAMMER #Hammer Filesystem
19options NULLFS #NULL filesystem
20options FFS #Berkeley Fast Filesystem
21options FFS_ROOT #FFS usable as root device [keep this!]
22options SOFTUPDATES #Enable FFS soft updates support
23options UFS_DIRHASH #Improve performance on big directories
24options MFS #Memory Filesystem
25options TMPFS #Temporary Filesystem
26options MD_ROOT #MD is a potential root device
27options NFS #Network Filesystem
28options NFS_ROOT #NFS usable as root device, NFS required
29options MSDOSFS #MSDOS Filesystem
30options CD9660 #ISO 9660 Filesystem
31options PROCFS #Process filesystem
32options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
33options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
34options DEVICE_POLLING # Support mixed interrupt-polling
35 # handling of network device drivers
36options UCONSOLE #Allow users to grab the console
37options KTRACE #ktrace(1) support
38options SYSVSHM #SYSV-style shared memory
39options SYSVMSG #SYSV-style message queues
40options SYSVSEM #SYSV-style semaphores
41options P1003_1B #Posix P1003_1B real-time extensions
42options _KPOSIX_PRIORITY_SCHEDULING
43options ICMP_BANDLIM #Rate limit bad replies
44options KBD_INSTALL_CDEV # install a CDEV entry in /dev
45options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
46 # output. Adds ~128k to driver.
47options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
48 # output. Adds ~215k to driver.
49options DSCHED_FQ # Fair-queuing disk scheduler
50
51# ALTQ
52options ALTQ #alternate queueing
53options ALTQ_CBQ #class based queueing
54options ALTQ_RED #random early detection
55options ALTQ_RIO #triple red for diffserv (needs RED)
56options ALTQ_HFSC #hierarchical fair service curve
57options ALTQ_PRIQ #priority queue
58options ALTQ_FAIRQ #fair queueing
59#options ALTQ_NOPCC #don't use processor cycle counter
60#options ALTQ_DEBUG #for debugging
61
62
1f15ba20 63# SMP boxes with severely broken BIOSes which
6991fb65 64# boot fine for non-SMP builds *might* work in SMP mode
1f15ba20
SW
65# if you disable APIC_IO by setting the loader tunable
66# hw.apic_io_enable to 0.
6991fb65
MD
67#
68options SMP # Symmetric MultiProcessor Kernel
6991fb65
MD
69
70# Debugging for Development
71options DDB
72options DDB_TRACE
73options INVARIANTS
74
75device isa
76device pci
77
78# AHCI driver, this will override NATA for AHCI devices,
79# both drivers may be included.
80#
81device ahci
82
83# SiI3124/3132 driver
84#
85device sili
86
87# NEW-ATA (NATA) and ATAPI devices
88#
89device nata
90device natadisk # ATA disk drives
91device natapicd # ATAPI CDROM drives
92device natapifd # ATAPI floppy drives
93device natapist # ATAPI tape drives
94device natapicam # Emulate ATAPI devices as SCSI
95device nataraid # support for ATA software RAID
96 # controllers
97device natausb # ATA-over-USB support
98options ATA_STATIC_ID # Static device numbering
99
100# LEGACY ATA and ATAPI devices
101#device ata0 at isa? port IO_WD1 irq 14
102#device ata1 at isa? port IO_WD2 irq 15
103#device ata
104#device atadisk # ATA disk drives
105#device atapicd # ATAPI CDROM drives
106#device atapifd # ATAPI floppy drives
107#device atapist # ATAPI tape drives
108#device atapicam # Emulate ATAPI devices as SCSI via CAM
109#options ATA_STATIC_ID #Static device numbering
110
111# SCSI Controllers
112device ahb # EISA AHA1742 family
113device ahc # AHA2940 and onboard AIC7xxx devices
114device ahd # AHA39320/29320 and onboard AIC79xx devices
115device amd # AMD 53C974 (Tekram DC-390(T))
116device isp # Qlogic family
117device mpt # LSI-Logic MPT/Fusion
118device ncr # NCR/Symbios Logic
119device sym # NCR/Symbios Logic (newer chipsets)
120options SYM_SETUP_LP_PROBE_MAP=0x40
121 # Allow ncr to attach legacy NCR devices when
122 # both sym and ncr are configured
123
124device adv0 at isa?
125device adw
126device bt0 at isa?
127device aha0 at isa?
128device aic0 at isa?
129
130device ncv # NCR 53C500
131device nsp # Workbit Ninja SCSI-3
132device stg # TMC 18C30/18C50
133
134# SCSI peripherals
135device scbus # SCSI bus (required)
136device da # Direct Access (disks)
137device sa # Sequential Access (tape etc)
138device cd # CD
139device pass # Passthrough device (direct SCSI access)
140device sg # Passthrough device (linux scsi generic)
141
142# RAID controllers interfaced to the SCSI subsystem
143device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
144device dpt # DPT Smartcache - See LINT for options!
145device iir # Intel Integrated RAID
146device mly # Mylex AcceleRAID/eXtremeRAID
147device ciss # Compaq SmartRAID 5* series
148
149# RAID controllers
150device aac # Adaptec FSA RAID, Dell PERC2/PERC3
151#device aacp # SCSI passthrough for aac (requires CAM)
152device ida # Compaq Smart RAID
153device ips # IBM ServeRAID
154device amr # AMI MegaRAID
155device mlx # Mylex DAC960 family
156device twe # 3ware Escalade 7000/8000's
157device twa # 3ware 9000 series PATA/SATA RAID
158
159#
160# Areca RAID (CAM is required).
161#
162device arcmsr # Areca SATA II RAID
163
164# atkbdc0 controls both the keyboard and the PS/2 mouse
165device atkbdc0 at isa? port IO_KBD
166device atkbd0 at atkbdc? irq 1 flags 0x1
167device psm0 at atkbdc? irq 12
168
169device vga0 at isa?
170
171# kbdmux is the keyboard multiplexer
172device kbdmux
173
174# splash screen/screen saver
175pseudo-device splash
176
177# syscons is the default console driver, resembling an SCO console
178device sc0 at isa? flags 0x100
179options SC_PIXEL_MODE # add support for the raster text mode
180
181device agp # support several AGP chipsets
182
183# HW monitoring devices
184device aps0 at isa? port 0x1600
185device lm0 at isa? port 0x290
186device it0 at isa? port 0x290
187device it1 at isa? port 0xc00
188device it2 at isa? port 0xd00
189device it3 at isa? port 0x228
190device wbsio0 at isa? port 0x2e
191device wbsio1 at isa? port 0x4e
192device lm#3 at wbsio?
193
194# PCCARD (PCMCIA) support
195device pccard
196device cardbus
197device cbb
198
199# Serial (COM) ports
200device sio0 at isa? port IO_COM1 flags 0x10 irq 4
201device sio1 at isa? port IO_COM2 irq 3
202device sio2 at isa? disable port IO_COM3 irq 5
203device sio3 at isa? disable port IO_COM4 irq 9
204
205# Parallel port
206device ppc0 at isa? irq 7
207device ppbus # Parallel port bus (required)
208device lpt # Printer
209device plip # TCP/IP over parallel
210device ppi # Parallel port interface device
211#device vpo # Requires scbus and da
212
213
214# PCI Ethernet NICs.
215device de # DEC/Intel DC21x4x (``Tulip'')
216device txp # 3Com 3cR990 (``Typhoon'')
217device vx # 3Com 3c590, 3c595 (``Vortex'')
218
219device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
220 # Requires ig_hal
221device ig_hal # Intel PRO/1000 hardware abstraction layer
222
223# PCI Ethernet NICs that use the common MII bus controller code.
224# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
225device miibus # MII bus support
226device ae # Attansic/Atheros L2 Fast Ethernet
227device age # Attansic/Atheros L1 Gigabit Ethernet
228device alc # Atheros AR8131/AR8132
229device ale # Atheros AR8121/AR8113/AR8114
230device bce # Broadcom NetXtreme II Gigabit Ethernet
231device bfe # Broadcom BCM440x 10/100 Ethernet
232device dc # DEC/Intel 21143 and various workalikes
233device et # Agere ET1310 10/100/1000 Ethernet
234device fxp # Intel EtherExpress PRO/100B (82557, 82558)
235device jme # JMicron Gigabit/Fast Ethernet
236device pcn # AMD Am79C97x PCI 10/100 NICs
237device rl # RealTek 8129/8139
238device re # RealTek 8139C+/8169
239device sf # Adaptec AIC-6915 (``Starfire'')
240device sis # Silicon Integrated Systems SiS 900/SiS 7016
241device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
242device ste # Sundance ST201 (D-Link DFE-550TX)
243device tl # Texas Instruments ThunderLAN
244device tx # SMC EtherPower II (83c170 ``EPIC'')
245device vge # VIA 612x GigE
246device vr # VIA Rhine, Rhine II
247device wb # Winbond W89C840F
248device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
249device bge # Broadcom BCM570x (``Tigon III'')
250device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
251device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
252device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
253
254# ISA Ethernet NICs.
255# 'device ed' requires 'device miibus'
256device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
257device ex
258# Xircom Ethernet
259device xe
260
261# Wireless NIC cards
262options IEEE80211_DEBUG #enable debugging msgs
263options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
264options IEEE80211_SUPPORT_TDMA #enable TDMA support
265device wlan # 802.11 support
266device wlan_ccmp # 802.11 CCMP support
267device wlan_tkip # 802.11 TKIP support
268device wlan_wep # 802.11 WEP support
269#device wlan_amrr # AMRR
270
271# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
272# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
273# mode (the factory default). If you set the switches on your ISA
274# card for a manually chosen I/O address and IRQ, you must specify
275# those parameters here.
276device an
277device ral # Ralink Technology 802.11 wireless NIC
278#device rtw # RealTek 802.11 wireless NIC
279# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
280# exists only as a PCMCIA device, so there is no ISA attachment needed
281# and resources will always be dynamically assigned by the pccard code.
282device wi
283
284# The probe order of these is presently determined by i386/isa/isa_compat.c.
285#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
286device lnc0 at isa? disable port 0x280 irq 10 drq 0
287device cs0 at isa? disable port 0x300
288device sn0 at isa? disable port 0x300 irq 10
289
290# Pseudo devices - the number indicates how many units to allocate.
291pseudo-device loop # Network loopback
292pseudo-device ether # Ethernet support
293pseudo-device sl 1 # Kernel SLIP
294pseudo-device ppp 1 # Kernel PPP
295pseudo-device tun # Packet tunnel.
296pseudo-device pty # Pseudo-ttys (telnet etc)
297pseudo-device md # Memory "disks"
298pseudo-device gif # IPv6 and IPv4 tunneling
299pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
300
301# The `bpf' pseudo-device enables the Berkeley Packet Filter.
302# Be aware of the administrative consequences of enabling this!
303pseudo-device bpf #Berkeley packet filter
304
305pseudo-device crypto # core crypto support, used by wlan
306
307# USB support
308device uhci # UHCI PCI->USB interface
309device ohci # OHCI PCI->USB interface
310device usb # USB Bus (required)
311device ugen # Generic
312device uhid # "Human Interface Devices"
313device ukbd # Keyboard
314device ulpt # Printer
315device umass # Disks/Mass storage - Requires scbus and da
316device ums # Mouse
317device uscanner # Scanners
318device urio # Diamond Rio MP3 Player
319# USB Ethernet, requires mii
320device aue # ADMtek USB ethernet
321device axe # ASIX Electronics USB Ethernet
322device cue # CATC USB ethernet
323device kue # Kawasaki LSI USB ethernet
324device rue # RealTek 8150 based USB ethernet
325# USB wireless NICs, requires wlan, wlan_amrr
326#device rum # Ralink Technology RT2501USB/RT2601USB
327#device ural # Ralink Technology RT2500USB
328
329# FireWire support
330device firewire # FireWire bus code
331device sbp # SCSI over FireWire (Requires scbus and da)
332device fwe # Ethernet over FireWire (non-standard!)