amr(4): Sync with FreeBSD.
[dragonfly.git] / sys / config / GENERIC_SMP
CommitLineData
6991fb65
MD
1#
2# GENERIC_SMP -- Generic kernel configuration file for DragonFly/i386
3#
4# Check the LINT configuration file in sys/config, for an
5# exhaustive list of options.
6#
7platform pc32
8machine i386
9machine_arch i386
10cpu I486_CPU
11cpu I586_CPU
12cpu I686_CPU
13ident GENERIC_SMP
14maxusers 0
15
16makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
17
18options MATH_EMULATE #Support for x87 emulation
19options INET #InterNETworking
20options INET6 #IPv6 communications protocols
21options HAMMER #Hammer Filesystem
22options NULLFS #NULL filesystem
23options FFS #Berkeley Fast Filesystem
24options FFS_ROOT #FFS usable as root device [keep this!]
25options SOFTUPDATES #Enable FFS soft updates support
26options UFS_DIRHASH #Improve performance on big directories
27options MFS #Memory Filesystem
28options TMPFS #Temporary Filesystem
29options MD_ROOT #MD is a potential root device
30options NFS #Network Filesystem
31options NFS_ROOT #NFS usable as root device, NFS required
32options MSDOSFS #MSDOS Filesystem
33options CD9660 #ISO 9660 Filesystem
34options PROCFS #Process filesystem
35options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
36options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
37options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
38options DEVICE_POLLING # Support mixed interrupt-polling
39 # handling of network device drivers
40options UCONSOLE #Allow users to grab the console
41options USERCONFIG #boot -c editor
42options VISUAL_USERCONFIG #visual boot -c editor
43options KTRACE #ktrace(1) support
44options SYSVSHM #SYSV-style shared memory
45options SYSVMSG #SYSV-style message queues
46options SYSVSEM #SYSV-style semaphores
47options P1003_1B #Posix P1003_1B real-time extensions
48options _KPOSIX_PRIORITY_SCHEDULING
49options ICMP_BANDLIM #Rate limit bad replies
50options KBD_INSTALL_CDEV # install a CDEV entry in /dev
51options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
52 # output. Adds ~128k to driver.
53options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
54 # output. Adds ~215k to driver.
55options DSCHED_FQ # Fair-queuing disk scheduler
56
57# ALTQ
58options ALTQ #alternate queueing
59options ALTQ_CBQ #class based queueing
60options ALTQ_RED #random early detection
61options ALTQ_RIO #triple red for diffserv (needs RED)
62options ALTQ_HFSC #hierarchical fair service curve
63options ALTQ_PRIQ #priority queue
64options ALTQ_FAIRQ #fair queueing
65#options ALTQ_NOPCC #don't use processor cycle counter
66#options ALTQ_DEBUG #for debugging
67
eac0bf8f
MD
68# SMP boxes should normally be build with SMP and APIC_IO. If SMP has
69# interrupt routing problems in APIC_IO you can disable it with the
70# hw.apic_io_enable=0 tunable or by building without the APIC_IO option.
71#
1f15ba20 72#
6991fb65 73options SMP # Symmetric MultiProcessor Kernel
eac0bf8f 74options APIC_IO # hw.apic_io_enable = 1 by default
6991fb65
MD
75
76# Debugging for Development
77options DDB
78options DDB_TRACE
79options INVARIANTS
80
81device isa
82device eisa
83device pci
84
85# Floppy drives
86device fdc0 at isa? port IO_FD1 irq 6 drq 2
87device fd0 at fdc0 drive 0
88device fd1 at fdc0 drive 1
89#
90# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
91# don't use the above line for fdc0 but the following one:
92#device fdc0
93
94# AHCI driver, this will override NATA for AHCI devices,
95# both drivers may be included.
96#
97device ahci
98
99# SiI3124/3132 driver
100#
101device sili
102
103# NEW-ATA (NATA) and ATAPI devices
104#
105device nata
106device natadisk # ATA disk drives
107device natapicd # ATAPI CDROM drives
108device natapifd # ATAPI floppy drives
109device natapist # ATAPI tape drives
110device natapicam # Emulate ATAPI devices as SCSI
111device nataraid # support for ATA software RAID
112 # controllers
113device natausb # ATA-over-USB support
114options ATA_STATIC_ID # Static device numbering
115
116# LEGACY ATA and ATAPI devices
117#device ata0 at isa? port IO_WD1 irq 14
118#device ata1 at isa? port IO_WD2 irq 15
119#device ata
120#device atadisk # ATA disk drives
121#device atapicd # ATAPI CDROM drives
122#device atapifd # ATAPI floppy drives
123#device atapist # ATAPI tape drives
124#device atapicam # Emulate ATAPI devices as SCSI via CAM
125#options ATA_STATIC_ID #Static device numbering
126
127# SCSI Controllers
128device ahb # EISA AHA1742 family
129device ahc # AHA2940 and onboard AIC7xxx devices
130device ahd # AHA39320/29320 and onboard AIC79xx devices
131device amd # AMD 53C974 (Tekram DC-390(T))
132device isp # Qlogic family
133device mpt # LSI-Logic MPT/Fusion
134device ncr # NCR/Symbios Logic
135device sym # NCR/Symbios Logic (newer chipsets)
136options SYM_SETUP_LP_PROBE_MAP=0x40
137 # Allow ncr to attach legacy NCR devices when
138 # both sym and ncr are configured
139
140device adv0 at isa?
141device adw
142device bt0 at isa?
143device aha0 at isa?
144device aic0 at isa?
145
146device ncv # NCR 53C500
147device nsp # Workbit Ninja SCSI-3
148device stg # TMC 18C30/18C50
149
150# SCSI peripherals
151device scbus # SCSI bus (required)
152device da # Direct Access (disks)
153device sa # Sequential Access (tape etc)
154device cd # CD
155device pass # Passthrough device (direct SCSI access)
156device sg # Passthrough device (linux scsi generic)
157
158# RAID controllers interfaced to the SCSI subsystem
159device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
160device dpt # DPT Smartcache - See LINT for options!
161device iir # Intel Integrated RAID
162device mly # Mylex AcceleRAID/eXtremeRAID
163device ciss # Compaq SmartRAID 5* series
164
165# RAID controllers
166device aac # Adaptec FSA RAID, Dell PERC2/PERC3
167#device aacp # SCSI passthrough for aac (requires CAM)
168device ida # Compaq Smart RAID
169device ips # IBM ServeRAID
170device amr # AMI MegaRAID
1fcd0ba2 171device amrp # SCSI Passthrough interface (optional, CAM req.)
6991fb65 172device mlx # Mylex DAC960 family
249d29c8
SW
173device mfi # LSI MegaRAID SAS
174device mfip # LSI MegaRAID SAS passthrough, requires CAM
6991fb65
MD
175device twe # 3ware Escalade 7000/8000's
176device twa # 3ware 9000 series PATA/SATA RAID
177device pst # Promise Supertrack
178
179#
180# Areca RAID (CAM is required).
181#
182device arcmsr # Areca SATA II RAID
183
184# atkbdc0 controls both the keyboard and the PS/2 mouse
185device atkbdc0 at isa? port IO_KBD
186device atkbd0 at atkbdc? irq 1 flags 0x1
187device psm0 at atkbdc? irq 12
188
189device vga0 at isa?
190
191# kbdmux is the keyboard multiplexer
192device kbdmux
193
194# splash screen/screen saver
195pseudo-device splash
196
197# syscons is the default console driver, resembling an SCO console
198device sc0 at isa? flags 0x100
199options SC_PIXEL_MODE # add support for the raster text mode
200
201device agp # support several AGP chipsets
202
203# Floating point support - do not disable.
204device npx0 at nexus? port IO_NPX irq 13
205
206# Power management support (see LINT for more options)
207device apm0 at nexus? disable flags 0x20 # Advanced Power Management
208
209# HW monitoring devices
210device aps0 at isa? port 0x1600
211device lm0 at isa? port 0x290
212device it0 at isa? port 0x290
213device it1 at isa? port 0xc00
214device it2 at isa? port 0xd00
215device it3 at isa? port 0x228
216device wbsio0 at isa? port 0x2e
217device wbsio1 at isa? port 0x4e
218device lm#3 at wbsio?
219
220# PCCARD (PCMCIA) support
221device pccard
222device cardbus
223device cbb
224
225# Serial (COM) ports
226device sio0 at isa? port IO_COM1 flags 0x10 irq 4
227device sio1 at isa? port IO_COM2 irq 3
228device sio2 at isa? disable port IO_COM3 irq 5
229device sio3 at isa? disable port IO_COM4 irq 9
230
231# Parallel port
232device ppc0 at isa? irq 7
233device ppbus # Parallel port bus (required)
234device lpt # Printer
235device plip # TCP/IP over parallel
236device ppi # Parallel port interface device
237#device vpo # Requires scbus and da
238
239# PCI Ethernet NICs.
240device de # DEC/Intel DC21x4x (``Tulip'')
241device txp # 3Com 3cR990 (``Typhoon'')
242device vx # 3Com 3c590, 3c595 (``Vortex'')
243
244device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
245 # Requires ig_hal
246device ig_hal # Intel PRO/1000 hardware abstraction layer
247
248# PCI Ethernet NICs that use the common MII bus controller code.
249# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
250device miibus # MII bus support
251device ae # Attansic/Atheros L2 Fast Ethernet
252device age # Attansic/Atheros L1 Gigabit Ethernet
253device alc # Atheros AR8131/AR8132
254device ale # Atheros AR8121/AR8113/AR8114
255device bce # Broadcom NetXtreme II Gigabit Ethernet
256device bfe # Broadcom BCM440x 10/100 Ethernet
257device dc # DEC/Intel 21143 and various workalikes
258device et # Agere ET1310 10/100/1000 Ethernet
259device fxp # Intel EtherExpress PRO/100B (82557, 82558)
260device jme # JMicron Gigabit/Fast Ethernet
261device pcn # AMD Am79C97x PCI 10/100 NICs
262device rl # RealTek 8129/8139
263device re # RealTek 8139C+/8169
264device sf # Adaptec AIC-6915 (``Starfire'')
265device sis # Silicon Integrated Systems SiS 900/SiS 7016
266device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
267device ste # Sundance ST201 (D-Link DFE-550TX)
268device tl # Texas Instruments ThunderLAN
269device tx # SMC EtherPower II (83c170 ``EPIC'')
270device vge # VIA 612x GigE
271device vr # VIA Rhine, Rhine II
272device wb # Winbond W89C840F
273device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
274device bge # Broadcom BCM570x (``Tigon III'')
275device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
276device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
277device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
278
279# ISA Ethernet NICs.
280# 'device ed' requires 'device miibus'
281device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
282device ex
283device ep
284device fe0 at isa? disable port 0x300
285# Xircom Ethernet
286device xe
287
288# Wireless NIC cards
289options IEEE80211_DEBUG #enable debugging msgs
290options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
291options IEEE80211_SUPPORT_TDMA #enable TDMA support
292device wlan # 802.11 support
293device wlan_ccmp # 802.11 CCMP support
294device wlan_tkip # 802.11 TKIP support
295device wlan_wep # 802.11 WEP support
296#device wlan_amrr # AMRR
297
298# All wireless NICs require wlan and wlan_amrr
299# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
300# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
301# mode (the factory default). If you set the switches on your ISA
302# card for a manually chosen I/O address and IRQ, you must specify
303# those parameters here.
304device an
305device ral # Ralink Technology 802.11 wireless NIC
306#device rtw # RealTek 802.11 wireless NIC
307# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
308# exists only as a PCMCIA device, so there is no ISA attachment needed
309# and resources will always be dynamically assigned by the pccard code.
310device wi
311
312# The probe order of these is presently determined by i386/isa/isa_compat.c.
313device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
314#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
315device lnc0 at isa? disable port 0x280 irq 10 drq 0
316device cs0 at isa? disable port 0x300
317device sn0 at isa? disable port 0x300 irq 10
318
319# Pseudo devices - the number indicates how many units to allocate.
320pseudo-device loop # Network loopback
321pseudo-device ether # Ethernet support
322pseudo-device sl 1 # Kernel SLIP
323pseudo-device ppp 1 # Kernel PPP
324pseudo-device tun # Packet tunnel.
325pseudo-device pty # Pseudo-ttys (telnet etc)
326pseudo-device md # Memory "disks"
327pseudo-device gif # IPv6 and IPv4 tunneling
328pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
329
330# The `bpf' pseudo-device enables the Berkeley Packet Filter.
331# Be aware of the administrative consequences of enabling this!
332pseudo-device bpf #Berkeley packet filter
333
334pseudo-device crypto # core crypto support, used by wlan
335pseudo-device cryptodev
336
337# USB support
338device uhci # UHCI PCI->USB interface
339device ohci # OHCI PCI->USB interface
340device usb # USB Bus (required)
341device ugen # Generic
342device uhid # "Human Interface Devices"
343device ukbd # Keyboard
344device ulpt # Printer
345device umass # Disks/Mass storage - Requires scbus and da
346device ums # Mouse
347device uscanner # Scanners
348device urio # Diamond Rio MP3 Player
349# USB Ethernet, requires mii
350device aue # ADMtek USB ethernet
351device axe # ASIX Electronics USB Ethernet
352device cue # CATC USB ethernet
353device kue # Kawasaki LSI USB ethernet
354device rue # RealTek 8150 based USB ethernet
355# USB wireless NICs, requires wlan, wlan_amrr
356#device rum # Ralink Technology RT2501USB/RT2601USB
357#device ural # Ralink Technology RT2500USB
358
359# FireWire support
360device firewire # FireWire bus code
361device sbp # SCSI over FireWire (Requires scbus and da)
362device fwe # Ethernet over FireWire (non-standard!)