kernel: Fix linux emulation build.
[dragonfly.git] / Makefile.inc1
CommitLineData
984263bc
MD
1#
2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
cecff5c1
MD
3#
4# Build-time options are documented in make.conf(5).
984263bc
MD
5#
6# The intended user-driven targets are:
1397f94a 7#
984263bc 8# buildworld - rebuild *everything*, including glue to help do upgrades
1397f94a
MD
9# quickworld - skip the glue and do a depend+build on the meat
10# realquickworld - skip the glue and depend stages and just build the meat
11# crossworld - only build the glue (particularly the cross-build environment)
984263bc 12# installworld- install everything built by "buildworld"
984263bc
MD
13# most - build user commands, no libraries or include files
14# installmost - install user commands, no libraries or include files
15#
16# Standard targets (not defined here) are documented in the makefiles in
17# /usr/share/mk. These include:
18# obj depend all install clean cleandepend cleanobj
19
20# Put initial settings here.
21SUBDIR=
22
23# We must do share/info early so that installation of info `dir'
24# entries works correctly. Do it first since it is less likely to
25# grow dependencies on include and lib than vice versa.
26.if exists(${.CURDIR}/share/info)
27SUBDIR+= share/info
28.endif
29
30# We must do include and lib early so that the perl *.ph generation
31# works correctly as it uses the header files installed by this.
32.if exists(${.CURDIR}/include)
33SUBDIR+= include
34.endif
35.if exists(${.CURDIR}/lib)
36SUBDIR+= lib
37.endif
17d0fefe
MD
38# This exists simply to ensure that the obj dir hierarchy is
39# intact for nrelease, allowing the nrelease Makefile's to
40# reference ${.OBJDIR}.
41#
42.if exists(${.CURDIR}/nrelease)
43SUBDIR+= nrelease
44.endif
984263bc
MD
45
46.if exists(${.CURDIR}/bin)
47SUBDIR+= bin
48.endif
cecff5c1 49.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
984263bc
MD
50SUBDIR+= games
51.endif
52.if exists(${.CURDIR}/gnu)
53SUBDIR+= gnu
54.endif
984263bc
MD
55.if exists(${.CURDIR}/libexec)
56SUBDIR+= libexec
57.endif
58.if exists(${.CURDIR}/sbin)
59SUBDIR+= sbin
60.endif
cecff5c1 61.if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
984263bc
MD
62SUBDIR+= secure
63.endif
cecff5c1 64.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
984263bc
MD
65SUBDIR+= share
66.endif
67.if exists(${.CURDIR}/sys)
68SUBDIR+= sys
69.endif
70.if exists(${.CURDIR}/usr.bin)
71SUBDIR+= usr.bin
72.endif
73.if exists(${.CURDIR}/usr.sbin)
74SUBDIR+= usr.sbin
75.endif
76
984263bc
MD
77.if exists(${.CURDIR}/etc)
78SUBDIR+= etc
79.endif
80
81# These are last, since it is nice to at least get the base system
82# rebuilt before you do them.
83.if defined(LOCAL_DIRS)
84.for _DIR in ${LOCAL_DIRS}
85.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
86SUBDIR+= ${_DIR}
87.endif
88.endfor
89.endif
90
91.if defined(SUBDIR_OVERRIDE)
92SUBDIR= ${SUBDIR_OVERRIDE}
93.endif
94
95.if defined(NOCLEANDIR)
96CLEANDIR= clean cleandepend
97.else
98CLEANDIR= cleandir
99.endif
100
9974d917
SS
101.if defined(NO_CLEAN)
102NOCLEAN= # defined
103.endif
d0a8f509 104
1397f94a
MD
105# Object directory base in primary make. Note that when we rerun make
106# from inside this file we change MAKEOBJDIRPREFIX to the appropriate
107# subdirectory because the rest of the build system needs it that way.
108# The original object directory base is saved in OBJTREE.
109#
984263bc 110MAKEOBJDIRPREFIX?= /usr/obj
1397f94a
MD
111OBJTREE?= ${MAKEOBJDIRPREFIX}
112
113# Used for stage installs and pathing
114#
115DESTDIRBASE?= ${OBJTREE}${.CURDIR}
116
c89fd520
SS
117# Remove DESTDIR from MAKEFLAGS. It is present in the environment
118# anyhow, and we need to be able to override it for stage installs
119.MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*}
120
79809ae1 121# This sets the compiler we use to build the world/kernel with
30c91f0c 122WORLD_CCVER?= gcc44
b1242318 123WORLD_BINUTILSVER?= binutils221
ded5c503 124
b2b3ffcd
SS
125# temporary until everybody has converted to x86_64
126.if ${MACHINE_ARCH} == "amd64"
127MACHINE_ARCH= x86_64
128.makeenv MACHINE_ARCH
129.endif
130
984263bc
MD
131TARGET_ARCH?= ${MACHINE_ARCH}
132.if ${TARGET_ARCH} == ${MACHINE_ARCH}
133TARGET?= ${MACHINE}
134.else
135TARGET?= ${TARGET_ARCH}
136.endif
137.if make(buildworld)
138BUILD_ARCH!= sysctl -n hw.machine_arch
b2b3ffcd
SS
139
140# temporary until everybody has converted to x86_64
141.if ${BUILD_ARCH} == "amd64"
142BUILD_ARCH= x86_64
143.endif
144
984263bc
MD
145.if ${MACHINE_ARCH} != ${BUILD_ARCH}
146.error To cross-build, set TARGET_ARCH.
147.endif
148.endif
1397f94a 149
0955fd91
MD
150# Backwards compatibility with older make's or older sys.mk's. make
151# is expected to define MACHINE_PLATFORM.
152#
153.if !defined(MACHINE_PLATFORM)
154MACHINE_PLATFORM= pc32
155.endif
4d005c1d
SS
156
157# XXX this is ugly and we need to come up with a nicer solution
158.if !defined(TARGET_PLATFORM)
159.if ${TARGET_ARCH} == "i386"
160TARGET_PLATFORM= pc32
b2b3ffcd 161.elif ${TARGET_ARCH} == "x86_64"
4d005c1d
SS
162TARGET_PLATFORM= pc64
163.else
164.error Unknown target architecture.
165.endif
166.endif
0955fd91 167
5f87b7d3
SZ
168THREAD_LIB?= thread_xu
169.if ${THREAD_LIB} == "c_r"
170.if defined(NO_LIBC_R)
171.error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
172.endif
173.endif
174
1397f94a
MD
175# BTOOLS (Natively built) All non-cross-development tools that the
176# main build needs. This includes things like 'mkdir' and 'rm'.
177# We will not use the native system's exec path once we start
178# on WORLD. (bootstrap-tools and build-tools or BTOOLS)
179#
180# CTOOLS (Natively built) Cross development tools which are specific
181# to the target architecture.
182#
183# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and
184# CTOOLS.
185#
0955fd91
MD
186# MACHINE_PLATFORM Platform Architecture we are building on
187# MACHINE Machine Architecture (usually the same as MACHINE_ARCH)
e2ea6619
MD
188# MACHINE_ARCH Cpu Architecture we are building on
189#
0955fd91
MD
190# TARGET_PLATFORM Platform Architecture we are building for
191# TARGET Machine Architecture we are building for
e2ea6619 192# TARGET_ARCH Cpu Architecture we are building for
1397f94a
MD
193#
194BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH}
195CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
196WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH}
197
79aa78bc
MD
198# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
199# cross-tools stages to augment the existing command path to access newer
200# versions of certain utilities such as 'patch' that the cross-tools stage
201# might expect.
202#
203BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
204
1397f94a
MD
205# The strict temporary command path contains all binaries required
206# by the buildworld system after the cross-tools stage.
207#
21e43067 208STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games:/usr/pkg/bin
984263bc
MD
209
210TMPDIR?= /tmp
211TMPPID!= echo $$$$
984263bc
MD
212
213#
214# Building a world goes through the following stages
215#
216# 1. bootstrap-tool stage [BMAKE]
217# This stage is responsible for creating programs that
218# are needed for backward compatibility reasons. They
219# are not built as cross-tools.
220# 2. build-tool stage [TMAKE]
221# This stage is responsible for creating the object
222# tree and building any tools that are needed during
223# the build process.
224# 3. cross-tool stage [XMAKE]
225# This stage is responsible for creating any tools that
226# are needed for cross-builds. A cross-compiler is one
227# of them.
228# 4. world stage [WMAKE]
229# This stage actually builds the world.
230# 5. install stage (optional) [IMAKE]
231# This stage installs a previously built world.
232#
233
984263bc 234# bootstrap-tool stage
1397f94a
MD
235#
236BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
237 OBJTREE=${OBJTREE} \
44831353 238 DESTDIR=${BTOOLSDEST} \
79aa78bc 239 PATH=${BTOOLSPATH}:${PATH} \
984263bc 240 INSTALL="sh ${.CURDIR}/tools/install.sh"
1397f94a 241
984263bc 242BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
e486d225
SS
243 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
244 -DNO_WERROR -DNO_NLS
984263bc
MD
245
246# build-tool stage
1397f94a
MD
247#
248TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
249 OBJTREE=${OBJTREE} \
984263bc 250 DESTDIR= \
79aa78bc 251 PATH=${BTOOLSPATH}:${PATH} \
984263bc 252 INSTALL="sh ${.CURDIR}/tools/install.sh"
1397f94a
MD
253
254TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
e486d225 255 -DNO_FORTRAN -DNOSHARED
984263bc
MD
256
257# cross-tool stage
1397f94a
MD
258#
259# note: TOOLS_PREFIX points to the obj root holding the cross
44831353
MD
260# compiler binaries, while USRDATA_PREFIX points to the obj root
261# holding the target environment (and also determines where cross-built
262# libraries, crt*.o, and include files are installed).
1397f94a
MD
263#
264XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \
265 OBJTREE=${OBJTREE} \
266 DESTDIR=${CTOOLSDEST} \
267 INSTALL="sh ${.CURDIR}/tools/install.sh" \
268 TOOLS_PREFIX=${CTOOLSDEST} \
79aa78bc
MD
269 USRDATA_PREFIX=${WORLDDEST} \
270 PATH=${BTOOLSPATH}:${PATH}
1397f94a 271
44831353 272XMAKE= ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
e486d225 273 -DBOOTSTRAPPING -DNOSHARED
1397f94a
MD
274
275# world stage, note the strict path and note that TOOLS_PREFIX is left
276# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
277# which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
278# for both binary and library paths, even though it is being compiled to
279# WORLDDEST. None of the programs in the world stage are ever actually
280# executed during the buildworld/installworld.
281#
282CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \
283 OBJTREE=${OBJTREE} \
284 MACHINE_ARCH=${TARGET_ARCH} \
285 MACHINE=${TARGET} \
0955fd91 286 MACHINE_PLATFORM=${TARGET_PLATFORM} \
ded5c503 287 OBJFORMAT_PATH=${CTOOLSDEST} \
ce6fa878 288 HOST_CCVER=${HOST_CCVER} \
123dec51
SS
289 CCVER=${WORLD_CCVER} \
290 BINUTILSVER=${WORLD_BINUTILSVER}
984263bc 291
984263bc 292WMAKEENV= ${CROSSENV} \
1397f94a 293 DESTDIR=${WORLDDEST} \
984263bc 294 INSTALL="sh ${.CURDIR}/tools/install.sh" \
1397f94a
MD
295 PATH=${STRICTTMPPATH}
296
984263bc
MD
297WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
298
299# install stage
b07b69cc 300#
984263bc 301IMAKEENV= ${CROSSENV} \
1397f94a 302 PATH=${STRICTTMPPATH}
984263bc
MD
303IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
304
305# kernel stage
b07b69cc
MD
306#
307KMAKEENV= ${WMAKEENV}
984263bc 308
984263bc
MD
309# buildworld
310#
311# Attempt to rebuild the entire system, with reasonable chance of
312# success, regardless of how old your existing system is.
313#
2cde9453
SS
314_worldtmp: _cleantmp _mtreetmp
315.ORDER: _cleantmp _mtreetmp
316
317_cleantmp:
984263bc
MD
318 @echo
319 @echo "--------------------------------------------------------------"
320 @echo ">>> Rebuilding the temporary build tree"
321 @echo "--------------------------------------------------------------"
322.if !defined(NOCLEAN)
1397f94a 323 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
984263bc
MD
324.else
325 # XXX - These two can depend on any header file.
326 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
327 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
328.endif
2cde9453
SS
329
330_mtreetmp:
1397f94a
MD
331 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
332.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
333 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
334 -p ${_dir}/ > /dev/null
335 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
336 -p ${_dir}/usr > /dev/null
984263bc 337.endfor
1397f94a
MD
338 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
339 -p ${WORLDDEST}/usr/include > /dev/null
062db326 340 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
1397f94a 341
984263bc
MD
342_bootstrap-tools:
343 @echo
344 @echo "--------------------------------------------------------------"
345 @echo ">>> stage 1: bootstrap tools"
346 @echo "--------------------------------------------------------------"
347 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
348_cleanobj:
984263bc
MD
349 @echo
350 @echo "--------------------------------------------------------------"
1397f94a 351 @echo ">>> stage 2a: cleaning up the object tree"
984263bc
MD
352 @echo "--------------------------------------------------------------"
353 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
984263bc
MD
354_obj:
355 @echo
356 @echo "--------------------------------------------------------------"
1397f94a 357 @echo ">>> stage 2b: rebuilding the object tree"
984263bc
MD
358 @echo "--------------------------------------------------------------"
359 cd ${.CURDIR}; ${WMAKE} par-obj
360_build-tools:
361 @echo
362 @echo "--------------------------------------------------------------"
1397f94a 363 @echo ">>> stage 2c: build tools"
984263bc
MD
364 @echo "--------------------------------------------------------------"
365 cd ${.CURDIR}; ${TMAKE} build-tools
366_cross-tools:
367 @echo
368 @echo "--------------------------------------------------------------"
369 @echo ">>> stage 3: cross tools"
370 @echo "--------------------------------------------------------------"
371 cd ${.CURDIR}; ${XMAKE} cross-tools
372_includes:
373 @echo
374 @echo "--------------------------------------------------------------"
1397f94a 375 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
984263bc
MD
376 @echo "--------------------------------------------------------------"
377 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
378_libraries:
379 @echo
380 @echo "--------------------------------------------------------------"
1397f94a 381 @echo ">>> stage 4b: building libraries"
984263bc
MD
382 @echo "--------------------------------------------------------------"
383 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
384_depend:
385 @echo
386 @echo "--------------------------------------------------------------"
1397f94a 387 @echo ">>> stage 4c: make dependencies"
984263bc
MD
388 @echo "--------------------------------------------------------------"
389 cd ${.CURDIR}; ${WMAKE} par-depend
390everything:
391 @echo
392 @echo "--------------------------------------------------------------"
1397f94a 393 @echo ">>> stage 4d: building everything.."
984263bc
MD
394 @echo "--------------------------------------------------------------"
395 cd ${.CURDIR}; ${WMAKE} all
396
1397f94a
MD
397# note: buildworld no longer depends on _cleanobj because we rm -rf the
398# entire object tree and built the bootstrap tools in a different location.
399#
400# buildworld - build everything from scratch
401# quickworld - skip the bootstrap, build, and cross-build steps
402# realquickworld - skip the bootstrap, build, crossbuild, and depend step.
403#
404# note: we include _obj in realquickworld to prevent accidental creation
405# of files in /usr/src.
984263bc 406
c08b39fe 407WMAKE_TGTS=
984263bc
MD
408.if !defined(SUBDIR_OVERRIDE)
409WMAKE_TGTS+= _worldtmp _bootstrap-tools
410.endif
1397f94a 411WMAKE_TGTS+= _obj _build-tools
984263bc
MD
412.if !defined(SUBDIR_OVERRIDE)
413WMAKE_TGTS+= _cross-tools
414.endif
415WMAKE_TGTS+= _includes _libraries _depend everything
416
417buildworld: ${WMAKE_TGTS}
1397f94a 418
2cde9453 419quickworld: _mtreetmp _obj _includes _libraries _depend everything
1397f94a 420
2cde9453 421realquickworld: _mtreetmp _obj _includes _libraries everything
1397f94a
MD
422
423crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
424
984263bc 425.ORDER: ${WMAKE_TGTS}
9ce30817 426.ORDER: _obj _includes
2cde9453 427.ORDER: _mtreetmp _obj
984263bc
MD
428
429#
430# installcheck
431#
c08b39fe 432# Checks to be sure system is ready for installworld
984263bc
MD
433#
434installcheck:
435.if !defined(NO_SENDMAIL)
f35282e3
MD
436 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
437 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
984263bc 438.endif
f35282e3 439 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
f35282e3
MD
440 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; exit 1)
441 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
9b815a46 442.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
f7ed9937 443 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; exit 1;; esac
9b815a46 444.endif
984263bc
MD
445#
446# installworld
447#
448# Installs everything compiled by a 'buildworld'.
449#
5cccfb7b 450installworld: installcheck
984263bc 451 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
ec6483ce 452 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
984263bc
MD
453
454#
455# reinstall
456#
457# If you have a build server, you can NFS mount the source and obj directories
458# and do a 'make reinstall' on the *client* to install new binaries from the
459# most recent server build.
460#
461reinstall:
462 @echo "--------------------------------------------------------------"
463 @echo ">>> Making hierarchy"
464 @echo "--------------------------------------------------------------"
465 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
466 @echo
467 @echo "--------------------------------------------------------------"
468 @echo ">>> Installing everything.."
469 @echo "--------------------------------------------------------------"
470 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
984263bc 471
984263bc 472#
fc7aca3e 473# buildkernel, nativekernel, quickkernel, and installkernel
984263bc
MD
474#
475# Which kernels to build and/or install is specified by setting
476# KERNCONF. If not defined a GENERIC kernel is built/installed.
477# Only the existing (depending TARGET) config files are used
478# for building kernels and only the first of these is designated
479# as the one being installed.
480#
c2c83759
MD
481# You can specify INSTALLSTRIPPED=1 if you wish the installed
482# kernel and modules to be stripped of its debug info (required
483# symbols are left intact). You can specify INSTALLSTRIPPEDMODULES
484# if you only want to strip the modules of their debug info. These
485# only apply if you have DEBUG=-g in your kernel config or make line.
486#
984263bc
MD
487# Note that we have to use TARGET instead of TARGET_ARCH when
488# we're in kernel-land. Since only TARGET_ARCH is (expected) to
489# be set to cross-build, we have to make sure TARGET is set
490# properly.
491
492.if !defined(KERNCONF) && defined(KERNEL)
493KERNCONF= ${KERNEL}
494KERNWARN= yes
495.else
702a95cc
SS
496# XXX makeshift fix to build the right kernel for the (target) architecture
497# We should configure this in the platform files somehow
498.if ${TARGET_ARCH} == "i386"
984263bc 499KERNCONF?= GENERIC
702a95cc 500.else
b2b3ffcd 501KERNCONF?= X86_64_GENERIC
702a95cc 502.endif
984263bc
MD
503.endif
504INSTKERNNAME?= kernel
505
506KRNLSRCDIR= ${.CURDIR}/sys
4e54470f 507KRNLCONFDIR= ${KRNLSRCDIR}/config
984263bc
MD
508KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
509KERNCONFDIR?= ${KRNLCONFDIR}
510
511BUILDKERNELS=
512INSTALLKERNEL=
513.for _kernel in ${KERNCONF}
514.if exists(${KERNCONFDIR}/${_kernel})
515BUILDKERNELS+= ${_kernel}
516.if empty(INSTALLKERNEL)
517INSTALLKERNEL= ${_kernel}
518.endif
519.endif
520.endfor
521
9a359590
MD
522# kernel version numbers survive rm -rf
523#
524.for _kernel in ${BUILDKERNELS}
525.if exists(${KRNLOBJDIR}/${_kernel}/version)
526KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
527.endif
528.endfor
529
984263bc
MD
530#
531# buildkernel
532#
533# Builds all kernels defined by BUILDKERNELS.
534#
fc7aca3e 535bk_tools:
e05c8c84
MD
536 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
537 echo "You must buildworld before buildkernel. If you wish"; \
538 echo "to build a kernel using native tools, config it manually"; \
539 echo "or use the nativekernel target if you are in a rush"; \
540 exit 1; \
c2c83759
MD
541 fi
542
543maybe_bk_tools:
544.for _kernel in ${BUILDKERNELS}
545 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
546 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
547 echo "The kernel was build using buildworld tools which no" ; \
548 echo "longer appear to exist, quickkernel failed!" ; \
549 exit 1; \
550 fi; \
551 fi
552.endfor
e05c8c84 553
fc7aca3e 554bk_build_list:
984263bc
MD
555.if empty(BUILDKERNELS)
556 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
603cdb58 557 @echo ">>> Did you move your kernel configs from i386/conf to config/?"
984263bc
MD
558 @false
559.endif
fc7aca3e
MD
560
561bk_kernwarn:
984263bc
MD
562.if defined(KERNWARN)
563 @echo "--------------------------------------------------------------"
564 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
565 @echo "--------------------------------------------------------------"
566 @sleep 3
567.endif
568 @echo
fc7aca3e
MD
569
570# The buildkernel target rebuilds the specified kernels from scratch
571# using the crossbuild tools generated by the last buildworld. It is
572# the safest (but also the most time consuming) way to build a new kernel.
573#
574buildkernel: bk_tools bk_build_list bk_kernwarn
984263bc
MD
575.for _kernel in ${BUILDKERNELS}
576 @echo "--------------------------------------------------------------"
577 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
578 @echo "--------------------------------------------------------------"
579 @echo "===> ${_kernel}"
fc7aca3e
MD
580.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
581 rm -rf ${KRNLOBJDIR}/${_kernel}
582.else
e05c8c84 583 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
fc7aca3e 584 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
e05c8c84 585 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
fc7aca3e 586.endif
984263bc
MD
587 mkdir -p ${KRNLOBJDIR}
588.if !defined(NO_KERNELCONFIG)
589 cd ${KRNLCONFDIR}; \
1397f94a 590 PATH=${STRICTTMPPATH} \
984263bc
MD
591 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
592 ${KERNCONFDIR}/${_kernel}
9a359590
MD
593.endif
594.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
595 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
984263bc 596.endif
e05c8c84 597 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
984263bc
MD
598.if !defined(NO_KERNELDEPEND)
599 cd ${KRNLOBJDIR}/${_kernel}; \
600 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
601.endif
602 cd ${KRNLOBJDIR}/${_kernel}; \
603 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
604 @echo "--------------------------------------------------------------"
605 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
606 @echo "--------------------------------------------------------------"
607.endfor
608
fc7aca3e 609# The nativekernel target rebuilds the specified kernels from scratch
114580ac 610# using the system's standard compiler rather than using the crossbuild
fc7aca3e
MD
611# tools generated by the last buildworld. This is fairly safe if your
612# system is reasonable up-to-date.
e05c8c84 613#
fc7aca3e 614nativekernel: bk_build_list bk_kernwarn
e05c8c84
MD
615.for _kernel in ${BUILDKERNELS}
616 @echo "--------------------------------------------------------------"
617 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
618 @echo "--------------------------------------------------------------"
619 @echo "===> ${_kernel}"
fc7aca3e
MD
620.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
621 rm -rf ${KRNLOBJDIR}/${_kernel}
622.else
e05c8c84 623 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
fc7aca3e 624 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
e05c8c84 625 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
fc7aca3e 626.endif
e05c8c84
MD
627 mkdir -p ${KRNLOBJDIR}
628.if !defined(NO_KERNELCONFIG)
629 cd ${KRNLCONFDIR}; \
630 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
631 ${KERNCONFDIR}/${_kernel}
9a359590
MD
632.endif
633.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
634 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
e05c8c84
MD
635.endif
636 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
e05c8c84
MD
637 cd ${KRNLOBJDIR}/${_kernel}; \
638 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
639 ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
640.if !defined(NO_KERNELDEPEND)
641 cd ${KRNLOBJDIR}/${_kernel}; \
642 ${MAKE} KERNEL=${INSTKERNNAME} depend
643.endif
644 cd ${KRNLOBJDIR}/${_kernel}; \
645 ${MAKE} KERNEL=${INSTKERNNAME} all
646 @echo "--------------------------------------------------------------"
647 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
648 @echo "--------------------------------------------------------------"
649.endfor
650
fc7aca3e
MD
651# The quickkernel target rebuilds the specified kernels as quickly
652# as possible. It will use the native tools or the buildworld cross tools
653# based on whether the kernel was originally generated via buildkernel or
654# nativekernel. Config is rerun but the object hierarchy is not rebuilt,
655# nor is the make depend step run.
984263bc 656#
c2c83759 657quickkernel: maybe_bk_tools bk_build_list bk_kernwarn
fc7aca3e
MD
658.for _kernel in ${BUILDKERNELS}
659 @echo "--------------------------------------------------------------"
660 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
661 @echo "--------------------------------------------------------------"
662 @echo "===> ${_kernel}"
663.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
664.if !defined(NO_KERNELCONFIG)
665 cd ${KRNLCONFDIR}; \
666 PATH=${STRICTTMPPATH} \
667 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
668 ${KERNCONFDIR}/${_kernel}
669.endif
670 cd ${KRNLOBJDIR}/${_kernel}; \
671 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
672.else
673.if !defined(NO_KERNELCONFIG)
674 cd ${KRNLCONFDIR}; \
675 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
676 ${KERNCONFDIR}/${_kernel}
677.endif
678 cd ${KRNLOBJDIR}/${_kernel}; \
679 ${MAKE} KERNEL=${INSTKERNNAME} all
680.endif
681 @echo "--------------------------------------------------------------"
682 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
683 @echo "--------------------------------------------------------------"
684.endfor
685
686
984263bc
MD
687# installkernel
688#
689# Install the kernel defined by INSTALLKERNEL
690#
691installkernel reinstallkernel:
982b0507
MD
692 @echo "--------------------------------------------------------------"
693 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
694 @echo "--------------------------------------------------------------"
695.if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
984263bc 696 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
982b0507 697 ${IMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
c2c83759
MD
698.else
699 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
700 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
701.endif
984263bc 702
984263bc
MD
703#
704# most
705#
706# Build most of the user binaries on the existing system libs and includes.
707#
708most:
709 @echo "--------------------------------------------------------------"
710 @echo ">>> Building programs only"
711 @echo "--------------------------------------------------------------"
712.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
713 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all
714.endfor
715
716#
717# installmost
718#
719# Install the binaries built by the 'most' target. This does not include
720# libraries or include files.
721#
722installmost:
723 @echo "--------------------------------------------------------------"
724 @echo ">>> Installing programs only"
725 @echo "--------------------------------------------------------------"
726.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
727 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install
728.endfor
729
730#
731# ------------------------------------------------------------------------
732#
733# From here onwards are utility targets used by the 'make world' and
734# related targets. If your 'world' breaks, you may like to try to fix
735# the problem and manually run the following targets to attempt to
736# complete the build. Beware, this is *not* guaranteed to work, you
737# need to have a pretty good grip on the current state of the system
738# to attempt to manually finish it. If in doubt, 'make world' again.
739#
740
79aa78bc
MD
741# bootstrap-tools: Build all tools required to build all tools. Note that
742# order is important in a number of cases and also note that the bootstrap
743# and build tools stages have access to earlier binaries they themselves
744# had generated.
984263bc 745#
79aa78bc
MD
746# patch: older patch's do not have -i. This program must be built
747# first so other bootstrap tools that need to apply patches
748# can use it.
17030342
MD
749# [x]install: dependancies on various new install features
750# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
751# envs are not compatible with older objformat binaries.
752#
cecff5c1 753.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
984263bc
MD
754_strfile= games/fortune/strfile
755.endif
756
757bootstrap-tools:
062db326 758 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
1397f94a 759.for _tool in ${_strfile} \
1a7434d5 760 usr.bin/patch \
e2ea6619 761 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo bin/test \
11ba1493 762 bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
b07b69cc 763 bin/hostname bin/kill \
1397f94a 764 usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
1320c43d 765 usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/stat \
a96913f0 766 usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
1397f94a
MD
767 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
768 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
769 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
b07b69cc 770 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
e909bba2 771 usr.bin/cap_mkdb usr.bin/true usr.bin/false \
c02263c2 772 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
79ecda55 773 usr.bin/tail usr.bin/unifdef \
1397f94a 774 usr.sbin/chown usr.sbin/mtree usr.sbin/config \
ed5d5720 775 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
f37a5268 776 gnu/usr.bin/texinfo gnu/usr.bin/grep usr.bin/sort \
32a7b49a 777 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb
1397f94a 778 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
984263bc
MD
779 cd ${.CURDIR}/${_tool}; \
780 ${MAKE} DIRPRFX=${_tool}/ obj; \
781 ${MAKE} DIRPRFX=${_tool}/ depend; \
782 ${MAKE} DIRPRFX=${_tool}/ all; \
1397f94a 783 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
984263bc 784.endfor
e05c8c84 785 touch ${BTOOLSDEST}/.bootstrap_done
984263bc 786
bceb727e 787# build-tools: Build special purpose build tools.
984263bc 788#
1397f94a
MD
789# XXX we may be able to remove or consolidate this into bootstrap-tools
790# now that we have the native helper (.nx/.no) infrastructure.
791#
cecff5c1 792.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
984263bc
MD
793_share= share/syscons/scrnmaps
794.endif
795
30c91f0c 796.if !defined(NO_GCC41)
ddf7cc86
SS
797_gcc41_cross= gnu/usr.bin/cc41
798_gcc41_tools= gnu/usr.bin/cc41/cc_prep gnu/usr.bin/cc41/cc_tools
30c91f0c 799.endif
4f5ea479
SS
800_gcc44_cross= gnu/usr.bin/cc44
801_gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools
c97b9141 802_custom_cross= libexec/customcc
123dec51 803_binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
17030342 804
984263bc 805build-tools:
96c51b62 806.for _tool in ${_gcc41_tools} ${_gcc44_tools} ${_libkrb5} ${_share}
1397f94a 807 ${ECHODIR} "===> ${_tool} (build-tools)"; \
984263bc
MD
808 cd ${.CURDIR}/${_tool}; \
809 ${MAKE} DIRPRFX=${_tool}/ obj; \
1397f94a
MD
810 ${MAKE} DIRPRFX=${_tool}/ depend; \
811 ${MAKE} DIRPRFX=${_tool}/ all; \
812 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
984263bc 813.endfor
e05c8c84 814 touch ${BTOOLSDEST}/.build_done
984263bc
MD
815
816#
817# cross-tools: Build cross-building tools
818#
984263bc
MD
819.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
820_btxld= usr.sbin/btxld
821.endif
822
823cross-tools:
da5b39ba 824.for _tool in ${_btxld} ${_binutils} \
97c14704 825 usr.bin/objformat \
96c51b62 826 ${_gcc41_cross} ${_gcc44_cross} ${_custom_cross}
1397f94a 827 ${ECHODIR} "===> ${_tool} (cross-tools)"; \
984263bc
MD
828 cd ${.CURDIR}/${_tool}; \
829 ${MAKE} DIRPRFX=${_tool}/ obj; \
830 ${MAKE} DIRPRFX=${_tool}/ depend; \
831 ${MAKE} DIRPRFX=${_tool}/ all; \
1397f94a 832 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
984263bc 833.endfor
e05c8c84 834 touch ${CTOOLSDEST}/.cross_done
984263bc
MD
835
836#
837# hierarchy - ensure that all the needed directories are present
838#
839hierarchy:
840 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
841
842#
843# libraries - build all libraries, and install them under ${DESTDIR}.
844#
845# The list of libraries with dependents (${_prebuild_libs}) and their
846# interdependencies (__L) are built automatically by the
847# ${.CURDIR}/tools/make_libdeps.sh script.
848#
5228fe46
MD
849# .makeenv does not work when bootstrapping from 4.x, so we must be sure
850# to specify the correct CCVER or 'cc' will not exec the correct compiler.
851#
984263bc 852libraries:
30c91f0c 853.if !defined(NO_GCC41)
ddf7cc86
SS
854 cd ${.CURDIR}; \
855 HOST_CCVER=${HOST_CCVER} CCVER=gcc41 \
856 ${MAKE} -f Makefile.inc1 _startup_libs41;
30c91f0c 857.endif
4f5ea479
SS
858 cd ${.CURDIR}; \
859 HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \
860 ${MAKE} -f Makefile.inc1 _startup_libs44;
29d48e65 861 cd ${.CURDIR}; \
984263bc
MD
862 ${MAKE} -f Makefile.inc1 _startup_libs; \
863 ${MAKE} -f Makefile.inc1 _prebuild_libs; \
864 ${MAKE} -f Makefile.inc1 _generic_libs;
e05c8c84 865 touch ${WORLDDEST}/.libraries_done
984263bc
MD
866
867# These dependencies are not automatically generated:
868#
fd8b66cd 869# gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
4f5ea479
SS
870# shared libraries for ELF. The target for _startup_libsXX is
871# specifically built using gccXX.
984263bc 872#
fd8b66cd 873_startup_libs41= gnu/lib/gcc41/csu gnu/lib/gcc41/libgcc
4f5ea479 874_startup_libs44= gnu/lib/gcc44/csu gnu/lib/gcc44/libgcc
e1da6819 875_startup_libs= lib/csu lib/libc lib/libc_rtld
984263bc 876
59392a00 877_prebuild_libs= lib/libbz2 lib/liblzma lib/libz
0b153c05 878_prebuild_libs+= lib/libutil
984263bc
MD
879
880_generic_libs= gnu/lib
881
984263bc 882_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
7d1ab061 883 lib/libncurses/libncurses lib/libopie lib/libradius \
48d67717 884 lib/libsbuf lib/libtacplus lib/libm \
9f95f3e0 885 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} \
3d91d947 886 lib/libpthread lib/libprop lib/libdevattr
984263bc
MD
887
888lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
984263bc
MD
889
890_generic_libs+= lib
891
cecff5c1 892.if !defined(NO_CRYPT)
984263bc
MD
893.if !defined(NO_OPENSSL)
894_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
895.if !defined(NO_OPENSSH)
896_prebuild_libs+= secure/lib/libssh
897secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
898.endif
899.endif
900_generic_libs+= secure/lib
901.endif
902
903_generic_libs+= usr.bin/lex/lib
904
96c51b62 905.for _lib in ${_startup_libs41} ${_startup_libs44} \
4db2a28c 906 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
984263bc
MD
907${_lib}__L: .PHONY
908.if exists(${.CURDIR}/${_lib})
909 ${ECHODIR} "===> ${_lib}"; \
910 cd ${.CURDIR}/${_lib}; \
911 ${MAKE} DIRPRFX=${_lib}/ depend; \
912 ${MAKE} DIRPRFX=${_lib}/ all; \
913 ${MAKE} DIRPRFX=${_lib}/ install
914.endif
915.endfor
916
917_startup_libs: ${_startup_libs:S/$/__L/}
ddf7cc86 918_startup_libs41: ${_startup_libs41:S/$/__L/}
4f5ea479 919_startup_libs44: ${_startup_libs44:S/$/__L/}
984263bc
MD
920_prebuild_libs: ${_prebuild_libs:S/$/__L/}
921_generic_libs: ${_generic_libs:S/$/__L/}
922
1397f94a
MD
923# library targets must be ordered because there are inter-library
924# races (e.g. generation of tconfig.h)
925#
ddf7cc86 926.ORDER: ${_startup_libs41:S/$/__L/}
4f5ea479 927.ORDER: ${_startup_libs44:S/$/__L/}
1397f94a
MD
928.ORDER: ${_startup_libs:S/$/__L/}
929.ORDER: ${_prebuild_libs:S/$/__L/}
930.ORDER: ${_generic_libs:S/$/__L/}
931
932.for __target in clean cleandepend cleandir obj depend includes
984263bc
MD
933.for entry in ${SUBDIR}
934${entry}.${__target}__D: .PHONY
935 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
936 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
937 edir=${entry}.${MACHINE_ARCH}; \
938 cd ${.CURDIR}/$${edir}; \
939 else \
940 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
941 edir=${entry}; \
942 cd ${.CURDIR}/$${edir}; \
943 fi; \
944 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
945.endfor
946par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
1397f94a 947.ORDER: ${SUBDIR:S/$/.${__target}__D/}
984263bc 948.endfor
1397f94a 949.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
984263bc 950
cb0f1574
MD
951# The wmake target is used by /usr/bin/wmake to run make in a
952# world build environment.
953#
954wmake:
1397f94a 955 @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}'
cb0f1574 956
5c7da0d7
MD
957wmakeenv:
958 @echo '${WMAKEENV} /bin/sh'
959
1397f94a
MD
960bmake:
961 @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}'
962
17030342
MD
963bmakeenv:
964 @echo '${BMAKEENV} /bin/sh'
965
1397f94a
MD
966tmake:
967 @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}'
968
17030342
MD
969tmakeenv:
970 @echo '${TMAKEENV} /bin/sh'
971
66834c05
SS
972xmake:
973 @echo '${XMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${XMAKE_ARGS}'
974
975xmakeenv:
976 @echo '${XMAKEENV} /bin/sh'
977
984263bc 978.include <bsd.subdir.mk>
cb0f1574 979