Add an rc script for starting vkernels upon boot.
[dragonfly.git] / etc / defaults / rc.conf
CommitLineData
984263bc
MD
1#!/bin/sh
2#
3
4# This is rc.conf - a file full of useful variables that you can set
5# to change the default startup behavior of your system. You should
6# not edit this file! Put any overrides into one of the ${rc_conf_files}
7# instead and you will be able to update these defaults later without
8# spamming your local configuration information.
9#
10# The ${rc_conf_files} files should only contain values which override
11# values set in this file. This eases the upgrade path when defaults
12# are changed and new features are added.
13#
14# All arguments must be in double or single quotes.
15#
9c600e7d 16# $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $
984263bc
MD
17
18##############################################################
19### Important initial Boot-time options ####################
20##############################################################
21
9c600e7d
MD
22rc_debug="NO" # Set to YES to enable debugging output from rc.d
23rc_info="YES" # Enables display of informational messages at boot.
24rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
984263bc
MD
25swapfile="NO" # Set to name of swapfile if aux swapfile desired.
26apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
27apmd_enable="NO" # Run apmd to handle APM event from userland.
28apmd_flags="" # Flags to apmd (if enabled).
48a120d3
LF
29battd_enable="NO" # Set to YES to have battd alert on 10% battery power remaining.
30battd_flags="" # Flags to battd (if enabled).
eb3a3472
HT
31sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes.
32sensorsd_flags="" # additional flags for sensorsd(8).
01b70f3f
SW
33hotplugd_enable="NO" # Run hotplugd to monitor devices hot plugging.
34hotplugd_flags="" # additional flags for hotplugd(8)
984263bc 35pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
984263bc 36pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether
9c600e7d 37removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
df2b1864 38local_startup="/usr/pkg/etc/rc.d /usr/local/etc/rc.d /usr/X11R6/etc/rc.d"
a9963945 39 # startup script dirs.
984263bc
MD
40script_name_sep=" " # Change if your startup scripts' names contain spaces
41rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
42fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
9c600e7d
MD
43netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
44extra_netfs_types="NO" # List of network extra filesystem types for delayed
45 # mount at startup (or NO).
b374f6d5
MS
46devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf"
47 # Config files for devfs(5)
984263bc
MD
48
49##############################################################
50### Network configuration sub-section ######################
51##############################################################
52
53### Basic network and firewall/security options: ###
fde62252
MD
54#
55# see 'man firewall' for an explanation of the default firewall rules
56#
984263bc
MD
57hostname="" # Set this!
58nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
9c600e7d
MD
59dhclient_program="/sbin/dhclient" # Path to dhcp client program.
60dhclient_flags="" # Additional flags to pass to dhcp client.
984263bc
MD
61firewall_enable="NO" # Set to YES to enable firewall functionality
62firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
63firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
fde62252
MD
64firewall_trusted_nets="192.168.0.0/16" # list of trusted nets
65firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0"
66firewall_allowed_icmp_types="0 3 8 11 12 13 14"
67firewall_open_tcp_ports="22 25 53 80 113 443"
68firewall_open_udp_ports="53"
984263bc
MD
69firewall_quiet="NO" # Set to YES to suppress rule display
70firewall_logging="NO" # Set to YES to enable events logging
71firewall_flags="" # Flags passed to ipfw when type is a file
72ip_portrange_first="NO" # Set first dynamically allocated port
73ip_portrange_last="NO" # Set last dynamically allocated port
74ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
75ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
76natd_program="/sbin/natd" # path to natd, if you want a different one.
77natd_enable="NO" # Enable natd (if firewall_enable == YES).
78natd_interface="" # Public interface or IPaddress to use.
79natd_flags="" # Additional flags for natd.
80ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
81ipfilter_program="/sbin/ipf" # where the ipfilter program lives
82ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
83 # /usr/src/contrib/ipfilter/rules for examples
84ipfilter_flags="" # additional flags for ipfilter
85ipnat_enable="NO" # Set to YES to enable ipnat functionality
86ipnat_program="/sbin/ipnat" # where the ipnat program lives
87ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
88ipnat_flags="" # additional flags for ipnat
89ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
90ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
91ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
92ipfs_enable="NO" # Set to YES to enable saving and restoring
93 # of state tables at shutdown and boot
94ipfs_program="/sbin/ipfs" # where the ipfs program lives
95ipfs_flags="" # additional flags for ipfs
95cc27f0
JS
96pf_enable="NO" # Set to YES to enable packet filter (pf)
97pf_rules="/etc/pf.conf" # rules definition file for pf
1cee7797 98pf_program="/usr/sbin/pfctl" # where the pfctl program lives
95cc27f0
JS
99pf_flags="" # additional flags for pfctl
100pflog_enable="NO" # Set to YES to enable packet filter logging
4bf6ceae 101pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
1cee7797 102pflog_program="/usr/sbin/pflogd" # where the pflogd program lives
95cc27f0 103pflog_flags="" # additional flags for pflogd
984263bc
MD
104tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
105log_in_vain="0" # >=1 to log connects to ports w/o listeners.
106tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
107# For the following option you need to have TCP_DROP_SYNFIN set in your
108# kernel. Please refer to LINT and NOTES for details.
109tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
110 # NOTE: this violates the TCP specification
111icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
112icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
113network_interfaces="auto" # List of network interfaces (or "auto").
114cloned_interfaces="" # List of cloned network interfaces to create.
115#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
116ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
117#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
118#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
f26c267a 119#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
984263bc
MD
120#
121# If you have any sppp(4) interfaces above, you might also want to set
122# the following parameters. Refer to spppcontrol(8) for their meaning.
123sppp_interfaces="" # List of sppp interfaces.
124#sppp_interfaces="isp0" # example: sppp over ISDN
125#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
126gif_interfaces="NO" # List of GIF tunnels (or "NO").
127#gif_interfaces="gif0 gif1" # Examples typically for a router.
128 # Choose correct tunnel addrs.
129#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
130#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
131
132# User ppp configuration.
133ppp_enable="NO" # Start user-ppp (or NO).
134ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
135 # For details see man page for ppp(8). Default is auto.
136ppp_nat="YES" # Use PPP's internal network address translation or NO.
137ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
138ppp_user="root" # Which user to run ppp as
139
140### Network daemon (miscellaneous) ###
5c8b08ff 141hostapd_enable="NO" # Run hostap daemon.
984263bc
MD
142syslogd_enable="YES" # Run syslog daemon (or NO).
143syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
8d5305b8
MD
144#syslogd_flags="-s" # Flags to syslogd (if enabled).
145syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
9c600e7d 146inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
984263bc
MD
147inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
148inetd_flags="-wW" # Optional flags to inetd
149#
150# named. It may be possible to run named in a sandbox, man security for
cd7c643f
MD
151# details. Note: when named_chrootdir is specified, RCNG automatically
152# adds '-u bind'.
984263bc
MD
153#
154named_enable="NO" # Run named, the DNS server (or NO).
155named_program="/usr/sbin/named" # path to named, if you want a different one.
dc51aa70 156named_pidfile="/var/run/named.pid" # Pid file
cd7c643f 157named_chrootdir="/etc/namedb" # Chroot directory (or "" not to auto-chroot it)
984263bc 158
984263bc
MD
159rwhod_enable="NO" # Run the rwho daemon (or NO).
160rwhod_flags="" # Flags for rwhod
161rarpd_enable="NO" # Run rarpd (or NO).
162rarpd_flags="" # Flags to rarpd.
9c600e7d
MD
163bootparamd_enable="NO" # Run bootparamd (or NO).
164bootparamd_flags="" # Flags to bootparamd
984263bc
MD
165pppoed_enable="NO" # Run the PPP over Ethernet daemon.
166pppoed_provider="*" # Provider and ppp(8) config file entry.
167pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
168pppoed_interface="fxp0" # The interface that pppoed runs on.
169sshd_enable="NO" # Enable sshd
170sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
171sshd_flags="" # Additional flags for sshd.
172
830cb541
JS
173ftpd_enable="NO" # Run stand-alone ftp daemon (or NO).
174ftpd_flags="" # Flags for ftpd, -D added implicitly.
175
5586c53b
CP
176### Network File System (NFS): ###
177### Server-side options also need rpcbind_enable="YES" ###
d615ff4f
MD
178###
179### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If
180### the mtime matches the data cache is left intact.
181###
984263bc
MD
182amd_enable="NO" # Run amd service with $amd_flags (or NO).
183amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
184amd_map_program="NO" # Can be set to "ypcat -k amd.master"
185nfs_client_enable="NO" # This host is an NFS client (or NO).
d615ff4f
MD
186nfs_access_cache="5" # Client attribute cache timeout in seconds
187#nfs_neg_cache="3" # Client attribute negative hit cache timeout
984263bc
MD
188nfs_server_enable="NO" # This host is an NFS server (or NO).
189nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
9c600e7d 190mountd_enable="NO" # Run mountd (or NO).
984263bc
MD
191mountd_flags="-r" # Flags to mountd (if NFS server enabled).
192weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
193nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
194nfs_bufpackets="" # bufspace (in packets) for client
9c600e7d 195rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
ce0e08e2 196rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
9c600e7d 197rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
ce0e08e2 198rpc_statd_flags="" # Flags to rpc.statd (if enabled).
72067a39 199rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown
9c600e7d 200rpcbind_enable="NO" # Run the portmapper service (YES/NO).
ce0e08e2 201rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
9c600e7d 202rpcbind_flags="" # Flags to rpcbind (if enabled).
984263bc
MD
203rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
204keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
205keyserv_flags="" # Flags to keyserv (if enabled).
206
207### Network Time Services options: ###
208timed_enable="NO" # Run the time daemon (or NO).
209timed_flags="" # Flags to timed (if enabled).
34b25456
RG
210dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO).
211dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one.
212dntpd_flags="" # Flags to dntpd (if enabled) also server name(s)
984263bc 213
5e2415d8 214# Bluetooth deamons and options:
5f834906
SW
215btconfig_enable="NO" # Configure Bluetooth devices (or NO).
216btconfig_devices="" # List of Bluetooth devices (or empty for all).
217#btconfig_<device>="" # Parameters to pass to <device>.
218btconfig_args="" # Parameters to pass to all devices.
219sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO).
220sdpd_flags="" # Flags to sdpd (if enabled).
ec4e37b7
HT
221bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO).
222bthcid_flags="" # Flags to bthcid (if enabled).
5e2415d8 223
9c600e7d 224# Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
984263bc
MD
225nis_client_enable="NO" # We're an NIS client (or NO).
226nis_client_flags="" # Flags to ypbind (if enabled).
227nis_ypset_enable="NO" # Run ypset at boot time (or NO).
228nis_ypset_flags="" # Flags to ypset (if enabled).
229nis_server_enable="NO" # We're an NIS server (or NO).
230nis_server_flags="" # Flags to ypserv (if enabled).
231nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
232nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
233nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
234nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
235
236### Network routing options: ###
237defaultrouter="NO" # Set to default gateway (or NO).
238static_routes="" # Set to static route list (or leave empty).
239gateway_enable="NO" # Set to YES if this host will be a gateway.
240router_enable="NO" # Set to YES to enable a routing daemon.
221b91ff 241router_program="/sbin/routed" # Name of routing daemon to use if enabled.
984263bc
MD
242router_flags="-q" # Flags for routing daemon.
243mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
244mrouted_flags="" # Flags for multicast routing daemon.
245ipxgateway_enable="NO" # Set to YES to enable IPX routing.
246ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
247ipxrouted_flags="" # Flags for IPX routing daemon.
248arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
249forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
250accept_sourceroute="NO" # accept source routed packets to us
251
252### ATM interface options: ###
253atm_enable="NO" # Configure ATM interfaces (or NO).
254#atm_netif_hea0="atm 1" # Network interfaces for physical interface.
255#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
256#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
257#atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
258#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
259#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
984263bc
MD
260atm_arps="" # Set to permanent ARP list (or leave empty).
261
262### ISDN interface options: (see also: /usr/share/examples/isdn) ###
263isdn_enable="NO" # Enable the ISDN subsystem (or NO).
264isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode).
265isdn_flags="-dn -d0x1f9" # Flags for isdnd
266isdn_ttype="cons25" # terminal type for fullscreen mode
267isdn_screenflags="NO" # screenflags for ${isdn_fsdev}
268isdn_trace="NO" # Enable the ISDN trace subsystem (or NO).
269isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace
270
271### Miscellaneous network options: ###
272icmp_bmcastecho="NO" # respond to broadcast ping packets
273
274### IPv6 options: ###
275ipv6_enable="NO" # Set to YES to set up for IPv6.
276ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
277ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
278#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
279ipv6_static_routes="" # Set to static route list (or leave empty).
280#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
281 # route toward loopback interface.
282#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
283ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
284ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
221b91ff 285ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
984263bc
MD
286ipv6_router_flags="" # Flags to IPv6 routing daemon.
287#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
288 # addrs.
289#ipv6_router_flags="-q" # If you want to run a routing daemon on an end
290 # node, you should stop advertisement.
291#ipv6_network_interfaces="ed0 ep0" # Examples for router
292 # or static configuration for end node.
293 # Choose correct prefix value.
294#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
295#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
296#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
297#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
298ipv6_default_interface="NO" # Default output interface for scoped addrs.
299 # Now this works only for IPv6 link local
300 # multicast addrs.
301rtadvd_enable="NO" # Set to YES to enable an IPv6 router
302 # advertisement daemon. If set to YES,
303 # this router becomes a possible candidate
304 # IPv6 default router for local subnets.
305rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
ad378d3f
JS
306rtsold_enable="NO" # Set to YES to enable an IPv6 routing
307 # solicitation daemon. This is used for
308 # automatic discovery of non-link local
309 # addresses.
310rtsold_flags="-a" # Do autoprobing of outgoing interface.
984263bc
MD
311mroute6d_enable="NO" # Do IPv6 multicast routing.
312mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
313 # routing daemon. You need to
314 # install it from package or
315 # port.
316mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
317stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
318 # tunneling interface. Specify this entry
319 # to enable 6to4 interface.
320stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
321 # to limit peer addr range. Effective value
322 # is 0-31.
323stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
324 # If you like, you can set "AUTO" for this.
325stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
326ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
327 # IPv6-to-IPv4 TCP translator. You also need
328 # faithd(8) setup.
9c600e7d 329ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
984263bc
MD
330 # communication. (like ::ffff:a.b.c.d)
331ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
332 # functionality
333ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
334ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
335ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
336ipv6_firewall_logging="NO" # Set to YES to enable events logging
337ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
338ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
339 # see /usr/src/contrib/ipfilter/rules
340 # for examples
341
342##############################################################
343### System console options #################################
344##############################################################
345
346keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
347keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
9c600e7d 348keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
984263bc
MD
349keychange="NO" # function keys default values (or NO).
350cursor="NO" # cursor type {normal|blink|destructive} (or NO).
351scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
352font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
353font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
354font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
355blanktime="300" # blank time (in seconds) or "NO" to turn it off.
2e7cfdc9 356saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
984263bc
MD
357moused_enable="NO" # Run the mouse daemon.
358moused_type="auto" # See man page for rc.conf(5) for available settings.
359moused_port="/dev/psm0" # Set to your mouse port.
360moused_flags="" # Any additional flags to moused.
9c600e7d 361mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
984263bc
MD
362 # language code table, specify alternative range
363 # start like mousechar_start=3, see vidcontrol(1)
38f96ee6 364vidhistory="" # Set video history buffer size
984263bc
MD
365allscreens_flags="" # Set this vidcontrol mode for all virtual screens
366allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
367
368
369##############################################################
370### Mail Transfer Agent (MTA) options ######################
371##############################################################
372
373mta_start_script="/etc/rc.sendmail"
374 # Script to start your chosen MTA, called by /etc/rc.
375# Settings for /etc/rc.sendmail:
9c600e7d 376sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
984263bc
MD
377sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
378sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
379sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
380 # Flags for localhost-only MTA
381sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
382sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
383sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
384sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
385 # Flags for sendmail_msp_queue daemon.
03e2a3c5 386sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO).
984263bc
MD
387
388
389##############################################################
390### Miscellaneous administrative options ###################
391##############################################################
392
2231736b 393mixer_enable="NO" # Manage mixer settings across reboots
984263bc
MD
394cron_enable="YES" # Run the periodic job daemon.
395cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
396cron_flags="" # Which options to pass to the cron daemon.
397lpd_enable="NO" # Run the line printer daemon.
398lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
399lpd_flags="" # Flags to lpd (if enabled).
ed5d5720 400nscd_enable="NO" # Run the nsswitch caching daemon.
984263bc
MD
401usbd_enable="NO" # Run the usbd daemon.
402usbd_flags="" # Flags to usbd (if enabled).
71fc104f
HT
403devd_enable="NO" # Rund devd(8) daemon.
404devd_flags="" # Flags to devd(8) (if enabled).
984263bc
MD
405dumpdev="NO" # Device name to crashdump to (or NO).
406dumpdir="/var/crash" # Directory where crash dumps are to be stored
407savecore_flags="" # Used if dumpdev is enabled above, and present.
408enable_quotas="NO" # turn on quotas on startup (or NO).
409check_quotas="YES" # Check quotas on startup (or NO).
410accounting_enable="NO" # Turn on process accounting (or NO).
9c600e7d 411sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
984263bc 412linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
984263bc
MD
413clear_tmp_enable="NO" # Clear /tmp at startup.
414ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
df2b1864 415ldconfig_paths="/usr/lib /usr/lib/gcc* /usr/lib/compat /usr/pkg/lib /usr/local/lib"
984263bc 416 # shared library search paths
984263bc
MD
417kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
418update_motd="YES" # update version info in /etc/motd (or NO)
419start_vinum="NO" # set to YES to start vinum
af1321ae 420rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
9c600e7d 421dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
842eea5b
SW
422newsyslog_enable="NO" # Run newsyslog at startup.
423newsyslog_flags="" # Flags to newsyslog (if enabled).
b58abc5e
SW
424resident_enable="NO" # Process /etc/resident.conf
425varsym_enable="NO" # Process /etc/varsym.conf
426watchdogd_enable="NO" # Start the software watchdog daemon
427
428##############################################################
429### Jail Configuration #######################################
430##############################################################
431
9c600e7d
MD
432jail_enable="NO" # Set to NO to disable starting of any jails
433jail_list="" # Space separated list of names of jails
434jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
435jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
b58abc5e
SW
436jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
437
438#
439# To use rc's built-in jail infrastructure create entries for
440# each jail, specified in jail_list, with the following variables.
441# NOTES:
442# - replace 'example' with the jail's name.
443# - except rootdir, hostname and ip, all of the following variables may be made
444# global jail variables if you don't specify a jail name (ie. jail_interface).
445#
446#jail_example_rootdir="/usr/jail/default" # Jail's root directory
447#jail_example_hostname="default.domain.com" # Jail's hostname
448#jail_example_ip="192.168.0.10" # Jail's IP number
449#jail_example_interface="" # Interface to create the IP alias on
450#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
451#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
452#jail_example_fdesc_enable="NO" # mount fdesc in the jail
453#jail_example_procfs_enable="NO" # mount procfs in jail
454#jail_example_mount_enable="NO" # mount/umount jail's fs
455#jail_example_fstab="" # fstab(5) for mount/umount
456#jail_example_flags="-l -U root" # flags for jail(8)
984263bc
MD
457
458##############################################################
2feb07f7
SW
459### VKernel options #########################################
460##############################################################
461
462vkernel_enable="NO" # Set to YES to enable starting of vkernels
463vkernel_list="" # Space separated list of names of vkernels
464
465#
466# Create an entry for each vkernel specified in vkernel_list
467# replacing 'example' by the name of the vkernel.
468#
469#vkernel_example_bin="/boot/kernel.VKERNEL"
470 # Path to the vkernel binary
471#vkernel_example_memsize="64m"
472 # Amount of memory for the vkernel
473#vkernel_example_rootimg_list="/var/vkernel/rootimg.01"
474 # Space separated list of disk images
475#vkernel_example_iface_list="auto:bridge0"
476 # Optional: space separated list network interfaces for the vkernel
477#vkernel_example_logfile="/dev/null"
478 # Optional: path to the console log file
479#vkernel_example_flags="-U"
480 # Optional: aditional flags to start the vkernel with
481
482##############################################################
984263bc
MD
483### Define source_rc_confs, the mechanism used by /etc/rc.* ##
484### scripts to source rc_conf_files overrides safely. ##
485##############################################################
486
487if [ -z "${source_rc_confs_defined}" ]; then
488 source_rc_confs_defined=yes
489 source_rc_confs () {
490 local i sourced_files
491 for i in ${rc_conf_files}; do
492 case ${sourced_files} in
493 *:$i:*)
494 ;;
495 *)
496 sourced_files="${sourced_files}:$i:"
497 if [ -r $i ]; then
498 . $i
499 fi
500 ;;
501 esac
502 done
503 }
504fi