Add tws(4), a driver for the LSI 3ware 9750 series SATA/SAS RAID controllers.
[dragonfly.git] / sys / config / GENERIC_SMP
CommitLineData
6991fb65
MD
1#
2# GENERIC_SMP -- Generic kernel configuration file for DragonFly/i386
3#
4# Check the LINT configuration file in sys/config, for an
5# exhaustive list of options.
6#
7platform pc32
8machine i386
9machine_arch i386
10cpu I486_CPU
11cpu I586_CPU
12cpu I686_CPU
13ident GENERIC_SMP
14maxusers 0
15
16makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
17
18options MATH_EMULATE #Support for x87 emulation
19options INET #InterNETworking
20options INET6 #IPv6 communications protocols
21options HAMMER #Hammer Filesystem
22options NULLFS #NULL filesystem
23options FFS #Berkeley Fast Filesystem
24options FFS_ROOT #FFS usable as root device [keep this!]
25options SOFTUPDATES #Enable FFS soft updates support
26options UFS_DIRHASH #Improve performance on big directories
27options MFS #Memory Filesystem
28options TMPFS #Temporary Filesystem
29options MD_ROOT #MD is a potential root device
30options NFS #Network Filesystem
31options NFS_ROOT #NFS usable as root device, NFS required
32options MSDOSFS #MSDOS Filesystem
33options CD9660 #ISO 9660 Filesystem
34options PROCFS #Process filesystem
35options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
36options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
37options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
38options DEVICE_POLLING # Support mixed interrupt-polling
39 # handling of network device drivers
40options UCONSOLE #Allow users to grab the console
41options USERCONFIG #boot -c editor
42options VISUAL_USERCONFIG #visual boot -c editor
43options KTRACE #ktrace(1) support
44options SYSVSHM #SYSV-style shared memory
45options SYSVMSG #SYSV-style message queues
46options SYSVSEM #SYSV-style semaphores
47options P1003_1B #Posix P1003_1B real-time extensions
48options _KPOSIX_PRIORITY_SCHEDULING
49options ICMP_BANDLIM #Rate limit bad replies
50options KBD_INSTALL_CDEV # install a CDEV entry in /dev
51options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
52 # output. Adds ~128k to driver.
53options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
54 # output. Adds ~215k to driver.
55options DSCHED_FQ # Fair-queuing disk scheduler
56
57# ALTQ
58options ALTQ #alternate queueing
59options ALTQ_CBQ #class based queueing
60options ALTQ_RED #random early detection
61options ALTQ_RIO #triple red for diffserv (needs RED)
62options ALTQ_HFSC #hierarchical fair service curve
63options ALTQ_PRIQ #priority queue
64options ALTQ_FAIRQ #fair queueing
65#options ALTQ_NOPCC #don't use processor cycle counter
66#options ALTQ_DEBUG #for debugging
67
eac0bf8f
MD
68# SMP boxes should normally be build with SMP and APIC_IO. If SMP has
69# interrupt routing problems in APIC_IO you can disable it with the
70# hw.apic_io_enable=0 tunable or by building without the APIC_IO option.
71#
1f15ba20 72#
6991fb65 73options SMP # Symmetric MultiProcessor Kernel
eac0bf8f 74options APIC_IO # hw.apic_io_enable = 1 by default
6991fb65
MD
75
76# Debugging for Development
77options DDB
78options DDB_TRACE
79options INVARIANTS
80
81device isa
6991fb65
MD
82device pci
83
84# Floppy drives
85device fdc0 at isa? port IO_FD1 irq 6 drq 2
86device fd0 at fdc0 drive 0
87device fd1 at fdc0 drive 1
88#
89# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
90# don't use the above line for fdc0 but the following one:
91#device fdc0
92
93# AHCI driver, this will override NATA for AHCI devices,
94# both drivers may be included.
95#
96device ahci
97
98# SiI3124/3132 driver
99#
100device sili
101
102# NEW-ATA (NATA) and ATAPI devices
103#
104device nata
105device natadisk # ATA disk drives
106device natapicd # ATAPI CDROM drives
107device natapifd # ATAPI floppy drives
108device natapist # ATAPI tape drives
109device natapicam # Emulate ATAPI devices as SCSI
110device nataraid # support for ATA software RAID
111 # controllers
112device natausb # ATA-over-USB support
113options ATA_STATIC_ID # Static device numbering
114
115# LEGACY ATA and ATAPI devices
116#device ata0 at isa? port IO_WD1 irq 14
117#device ata1 at isa? port IO_WD2 irq 15
118#device ata
119#device atadisk # ATA disk drives
120#device atapicd # ATAPI CDROM drives
121#device atapifd # ATAPI floppy drives
122#device atapist # ATAPI tape drives
123#device atapicam # Emulate ATAPI devices as SCSI via CAM
124#options ATA_STATIC_ID #Static device numbering
125
126# SCSI Controllers
6991fb65
MD
127device ahc # AHA2940 and onboard AIC7xxx devices
128device ahd # AHA39320/29320 and onboard AIC79xx devices
129device amd # AMD 53C974 (Tekram DC-390(T))
130device isp # Qlogic family
131device mpt # LSI-Logic MPT/Fusion
132device ncr # NCR/Symbios Logic
133device sym # NCR/Symbios Logic (newer chipsets)
134options SYM_SETUP_LP_PROBE_MAP=0x40
135 # Allow ncr to attach legacy NCR devices when
136 # both sym and ncr are configured
137
138device adv0 at isa?
139device adw
140device bt0 at isa?
141device aha0 at isa?
142device aic0 at isa?
143
144device ncv # NCR 53C500
145device nsp # Workbit Ninja SCSI-3
146device stg # TMC 18C30/18C50
147
148# SCSI peripherals
149device scbus # SCSI bus (required)
150device da # Direct Access (disks)
151device sa # Sequential Access (tape etc)
152device cd # CD
153device pass # Passthrough device (direct SCSI access)
154device sg # Passthrough device (linux scsi generic)
155
156# RAID controllers interfaced to the SCSI subsystem
cf78bed4 157device arcmsr # Areca SATA II RAID
6991fb65 158device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
cf78bed4 159device ciss # Compaq SmartRAID 5* series
6991fb65 160device dpt # DPT Smartcache - See LINT for options!
cf78bed4 161device hptiop # Highpoint RocketRaid 3xxx series
35878b55 162device hptmv # Highpoint RocketRAID 182x
6991fb65
MD
163device iir # Intel Integrated RAID
164device mly # Mylex AcceleRAID/eXtremeRAID
4e29b7eb 165device twa # 3ware 9000 series PATA/SATA RAID
33190b70 166device tws # 3ware 9750 series SATA/SAS RAID
6991fb65
MD
167
168# RAID controllers
169device aac # Adaptec FSA RAID, Dell PERC2/PERC3
170#device aacp # SCSI passthrough for aac (requires CAM)
6991fb65 171device amr # AMI MegaRAID
1fcd0ba2 172device amrp # SCSI Passthrough interface (optional, CAM req.)
cf78bed4
SW
173device ida # Compaq Smart RAID
174device ips # IBM ServeRAID
6991fb65 175device mlx # Mylex DAC960 family
249d29c8
SW
176device mfi # LSI MegaRAID SAS
177device mfip # LSI MegaRAID SAS passthrough, requires CAM
6991fb65 178device pst # Promise Supertrack
cf78bed4 179device twe # 3ware Escalade 7000/8000's
6991fb65
MD
180
181# atkbdc0 controls both the keyboard and the PS/2 mouse
182device atkbdc0 at isa? port IO_KBD
183device atkbd0 at atkbdc? irq 1 flags 0x1
184device psm0 at atkbdc? irq 12
185
186device vga0 at isa?
187
188# kbdmux is the keyboard multiplexer
189device kbdmux
190
191# splash screen/screen saver
192pseudo-device splash
193
194# syscons is the default console driver, resembling an SCO console
195device sc0 at isa? flags 0x100
196options SC_PIXEL_MODE # add support for the raster text mode
197
198device agp # support several AGP chipsets
199
200# Floating point support - do not disable.
201device npx0 at nexus? port IO_NPX irq 13
202
203# Power management support (see LINT for more options)
204device apm0 at nexus? disable flags 0x20 # Advanced Power Management
205
206# HW monitoring devices
207device aps0 at isa? port 0x1600
208device lm0 at isa? port 0x290
209device it0 at isa? port 0x290
210device it1 at isa? port 0xc00
211device it2 at isa? port 0xd00
212device it3 at isa? port 0x228
213device wbsio0 at isa? port 0x2e
214device wbsio1 at isa? port 0x4e
215device lm#3 at wbsio?
216
217# PCCARD (PCMCIA) support
218device pccard
219device cardbus
220device cbb
221
222# Serial (COM) ports
223device sio0 at isa? port IO_COM1 flags 0x10 irq 4
224device sio1 at isa? port IO_COM2 irq 3
225device sio2 at isa? disable port IO_COM3 irq 5
226device sio3 at isa? disable port IO_COM4 irq 9
227
228# Parallel port
229device ppc0 at isa? irq 7
230device ppbus # Parallel port bus (required)
231device lpt # Printer
232device plip # TCP/IP over parallel
233device ppi # Parallel port interface device
234#device vpo # Requires scbus and da
235
236# PCI Ethernet NICs.
237device de # DEC/Intel DC21x4x (``Tulip'')
238device txp # 3Com 3cR990 (``Typhoon'')
239device vx # 3Com 3c590, 3c595 (``Vortex'')
240
241device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
242 # Requires ig_hal
243device ig_hal # Intel PRO/1000 hardware abstraction layer
244
245# PCI Ethernet NICs that use the common MII bus controller code.
246# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
247device miibus # MII bus support
248device ae # Attansic/Atheros L2 Fast Ethernet
249device age # Attansic/Atheros L1 Gigabit Ethernet
250device alc # Atheros AR8131/AR8132
251device ale # Atheros AR8121/AR8113/AR8114
252device bce # Broadcom NetXtreme II Gigabit Ethernet
253device bfe # Broadcom BCM440x 10/100 Ethernet
254device dc # DEC/Intel 21143 and various workalikes
255device et # Agere ET1310 10/100/1000 Ethernet
256device fxp # Intel EtherExpress PRO/100B (82557, 82558)
257device jme # JMicron Gigabit/Fast Ethernet
258device pcn # AMD Am79C97x PCI 10/100 NICs
259device rl # RealTek 8129/8139
260device re # RealTek 8139C+/8169
261device sf # Adaptec AIC-6915 (``Starfire'')
262device sis # Silicon Integrated Systems SiS 900/SiS 7016
263device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
264device ste # Sundance ST201 (D-Link DFE-550TX)
265device tl # Texas Instruments ThunderLAN
266device tx # SMC EtherPower II (83c170 ``EPIC'')
267device vge # VIA 612x GigE
268device vr # VIA Rhine, Rhine II
269device wb # Winbond W89C840F
270device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
271device bge # Broadcom BCM570x (``Tigon III'')
272device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
273device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
274device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
275
276# ISA Ethernet NICs.
277# 'device ed' requires 'device miibus'
278device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
279device ex
280device ep
281device fe0 at isa? disable port 0x300
282# Xircom Ethernet
283device xe
284
285# Wireless NIC cards
286options IEEE80211_DEBUG #enable debugging msgs
287options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
288options IEEE80211_SUPPORT_TDMA #enable TDMA support
289device wlan # 802.11 support
290device wlan_ccmp # 802.11 CCMP support
291device wlan_tkip # 802.11 TKIP support
292device wlan_wep # 802.11 WEP support
293#device wlan_amrr # AMRR
294
295# All wireless NICs require wlan and wlan_amrr
296# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
297# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
298# mode (the factory default). If you set the switches on your ISA
299# card for a manually chosen I/O address and IRQ, you must specify
300# those parameters here.
301device an
302device ral # Ralink Technology 802.11 wireless NIC
303#device rtw # RealTek 802.11 wireless NIC
304# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
305# exists only as a PCMCIA device, so there is no ISA attachment needed
306# and resources will always be dynamically assigned by the pccard code.
307device wi
308
309# The probe order of these is presently determined by i386/isa/isa_compat.c.
310device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
311#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
312device lnc0 at isa? disable port 0x280 irq 10 drq 0
313device cs0 at isa? disable port 0x300
314device sn0 at isa? disable port 0x300 irq 10
315
316# Pseudo devices - the number indicates how many units to allocate.
317pseudo-device loop # Network loopback
318pseudo-device ether # Ethernet support
319pseudo-device sl 1 # Kernel SLIP
320pseudo-device ppp 1 # Kernel PPP
321pseudo-device tun # Packet tunnel.
322pseudo-device pty # Pseudo-ttys (telnet etc)
323pseudo-device md # Memory "disks"
324pseudo-device gif # IPv6 and IPv4 tunneling
325pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
326
327# The `bpf' pseudo-device enables the Berkeley Packet Filter.
328# Be aware of the administrative consequences of enabling this!
329pseudo-device bpf #Berkeley packet filter
330
331pseudo-device crypto # core crypto support, used by wlan
332pseudo-device cryptodev
333
334# USB support
335device uhci # UHCI PCI->USB interface
336device ohci # OHCI PCI->USB interface
337device usb # USB Bus (required)
338device ugen # Generic
339device uhid # "Human Interface Devices"
340device ukbd # Keyboard
341device ulpt # Printer
342device umass # Disks/Mass storage - Requires scbus and da
343device ums # Mouse
344device uscanner # Scanners
345device urio # Diamond Rio MP3 Player
346# USB Ethernet, requires mii
347device aue # ADMtek USB ethernet
348device axe # ASIX Electronics USB Ethernet
349device cue # CATC USB ethernet
350device kue # Kawasaki LSI USB ethernet
351device rue # RealTek 8150 based USB ethernet
352# USB wireless NICs, requires wlan, wlan_amrr
353#device rum # Ralink Technology RT2501USB/RT2601USB
354#device ural # Ralink Technology RT2500USB
355
356# FireWire support
357device firewire # FireWire bus code
358device sbp # SCSI over FireWire (Requires scbus and da)
359device fwe # Ethernet over FireWire (non-standard!)