Coretemp(4) driver for Intel Core on-die digital thermal sensor with patch
[dragonfly.git] / sys / config / GENERIC
CommitLineData
984263bc 1#
8611e04d 2# GENERIC -- Generic kernel configuration file for DragonFly/i386
984263bc 3#
23e12d00 4# Check the LINT configuration file in sys/config, for an
43800c56 5# exhaustive list of options.
984263bc 6#
20ed31d2 7# $DragonFly: src/sys/config/GENERIC,v 1.52 2007/06/09 17:56:27 swildner Exp $
984263bc 8
0955fd91
MD
9platform pc32
10machine i386
a9295349 11machine_arch i386
984263bc
MD
12cpu I386_CPU
13cpu I486_CPU
14cpu I586_CPU
15cpu I686_CPU
16ident GENERIC
17maxusers 0
18
1037a9ff 19makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
984263bc
MD
20
21options MATH_EMULATE #Support for x87 emulation
22options INET #InterNETworking
23options INET6 #IPv6 communications protocols
24options FFS #Berkeley Fast Filesystem
25options FFS_ROOT #FFS usable as root device [keep this!]
26options SOFTUPDATES #Enable FFS soft updates support
27options UFS_DIRHASH #Improve performance on big directories
28options MFS #Memory Filesystem
29options MD_ROOT #MD is a potential root device
30options NFS #Network Filesystem
31options NFS_ROOT #NFS usable as root device, NFS required
32options MSDOSFS #MSDOS Filesystem
33options CD9660 #ISO 9660 Filesystem
984263bc
MD
34options PROCFS #Process filesystem
35options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
db37e804 36options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
dd5596d6 37options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
fe091cd0
SZ
38options DEVICE_POLLING # Support mixed interrupt-polling
39 # handling of network device drivers
984263bc
MD
40options UCONSOLE #Allow users to grab the console
41options USERCONFIG #boot -c editor
42options VISUAL_USERCONFIG #visual boot -c editor
43options KTRACE #ktrace(1) support
44options SYSVSHM #SYSV-style shared memory
45options SYSVMSG #SYSV-style message queues
46options SYSVSEM #SYSV-style semaphores
47options P1003_1B #Posix P1003_1B real-time extensions
48options _KPOSIX_PRIORITY_SCHEDULING
49options ICMP_BANDLIM #Rate limit bad replies
50options KBD_INSTALL_CDEV # install a CDEV entry in /dev
51options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
52 # output. Adds ~128k to driver.
54ca5b45 53options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
984263bc
MD
54 # output. Adds ~215k to driver.
55
97359a5b
MD
56# To make an SMP kernel both SMP and APIC_IO are usually
57# specified. SMP boxes with severely broken BIOSes which
58# boot fine for non-SMP builds *might* work in SMP mode
59# if you define SMP and leave APIC_IO turned off.
60#
984263bc
MD
61#options SMP # Symmetric MultiProcessor Kernel
62#options APIC_IO # Symmetric (APIC) I/O
63
1037a9ff 64# Debugging for Development
78990d4c 65options DDB
863c2f64 66options DDB_TRACE
78990d4c 67options INVARIANTS
1037a9ff 68
54ca5b45
TS
69# ACPI options
70#options ACPI_QUIRK_VMWARE # VMware's ACPI-fast24 timer is broken
1037a9ff 71
984263bc
MD
72device isa
73device eisa
74device pci
75
76# Floppy drives
77device fdc0 at isa? port IO_FD1 irq 6 drq 2
78device fd0 at fdc0 drive 0
79device fd1 at fdc0 drive 1
80#
81# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
82# don't use the above line for fdc0 but the following one:
83#device fdc0
84
9f97f66c
MD
85# NEW-ATA (NATA) and ATAPI devices
86#
87device nata
88device natadisk # ATA disk drives
89device natapicd # ATAPI CDROM drives
90device natapifd # ATAPI floppy drives
91device natapist # ATAPI tape drives
92device natapicam # Emulate ATAPI devices as SCSI
20ed31d2
SW
93device nataraid # support for ATA software RAID
94 # controllers
95device natausb # ATA-over-USB support
9f97f66c
MD
96options ATA_STATIC_ID # Static device numbering
97options PCI_MAP_FIXUP # Needed for NATA
98
99# LEGACY ATA and ATAPI devices
100#device ata0 at isa? port IO_WD1 irq 14
101#device ata1 at isa? port IO_WD2 irq 15
102#device ata
103#device atadisk # ATA disk drives
104#device atapicd # ATAPI CDROM drives
105#device atapifd # ATAPI floppy drives
106#device atapist # ATAPI tape drives
107#device atapicam # Emulate ATAPI devices as SCSI via CAM
108#options ATA_STATIC_ID #Static device numbering
984263bc
MD
109
110# SCSI Controllers
111device ahb # EISA AHA1742 family
112device ahc # AHA2940 and onboard AIC7xxx devices
113device ahd # AHA39320/29320 and onboard AIC79xx devices
114device amd # AMD 53C974 (Tekram DC-390(T))
115device isp # Qlogic family
116device mpt # LSI-Logic MPT/Fusion
117device ncr # NCR/Symbios Logic
118device sym # NCR/Symbios Logic (newer chipsets)
119options SYM_SETUP_LP_PROBE_MAP=0x40
120 # Allow ncr to attach legacy NCR devices when
121 # both sym and ncr are configured
122
123device adv0 at isa?
124device adw
125device bt0 at isa?
126device aha0 at isa?
127device aic0 at isa?
128
129device ncv # NCR 53C500
130device nsp # Workbit Ninja SCSI-3
131device stg # TMC 18C30/18C50
132
133# SCSI peripherals
134device scbus # SCSI bus (required)
135device da # Direct Access (disks)
136device sa # Sequential Access (tape etc)
137device cd # CD
138device pass # Passthrough device (direct SCSI access)
139
140# RAID controllers interfaced to the SCSI subsystem
141device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
142device dpt # DPT Smartcache - See LINT for options!
143device iir # Intel Integrated RAID
144device mly # Mylex AcceleRAID/eXtremeRAID
145device ciss # Compaq SmartRAID 5* series
146
147# RAID controllers
148device aac # Adaptec FSA RAID, Dell PERC2/PERC3
149#device aacp # SCSI passthrough for aac (requires CAM)
150device ida # Compaq Smart RAID
3b191904 151device ips # IBM ServeRAID
984263bc
MD
152device amr # AMI MegaRAID
153device mlx # Mylex DAC960 family
2d0f6098 154device twe # 3ware Escalade 7000/8000's
ab443496 155device twa # 3ware Escalade 9000's
b7ebf86e 156device pst # Promise Supertrack
984263bc
MD
157
158# atkbdc0 controls both the keyboard and the PS/2 mouse
159device atkbdc0 at isa? port IO_KBD
160device atkbd0 at atkbdc? irq 1 flags 0x1
161device psm0 at atkbdc? irq 12
162
163device vga0 at isa?
164
165# splash screen/screen saver
166pseudo-device splash
167
168# syscons is the default console driver, resembling an SCO console
169device sc0 at isa? flags 0x100
c42bc832 170options SC_PIXEL_MODE # add support for the raster text mode
984263bc 171
984263bc
MD
172device agp # support several AGP chipsets
173
174# Floating point support - do not disable.
175device npx0 at nexus? port IO_NPX irq 13
176
177# Power management support (see LINT for more options)
178device apm0 at nexus? disable flags 0x20 # Advanced Power Management
179
180# PCCARD (PCMCIA) support
666d2603
JS
181device pccard
182device cardbus
183device cbb
984263bc
MD
184
185# Serial (COM) ports
186device sio0 at isa? port IO_COM1 flags 0x10 irq 4
187device sio1 at isa? port IO_COM2 irq 3
188device sio2 at isa? disable port IO_COM3 irq 5
189device sio3 at isa? disable port IO_COM4 irq 9
190
191# Parallel port
192device ppc0 at isa? irq 7
193device ppbus # Parallel port bus (required)
194device lpt # Printer
195device plip # TCP/IP over parallel
196device ppi # Parallel port interface device
197#device vpo # Requires scbus and da
198
199
200# PCI Ethernet NICs.
201device de # DEC/Intel DC21x4x (``Tulip'')
202device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
203device txp # 3Com 3cR990 (``Typhoon'')
204device vx # 3Com 3c590, 3c595 (``Vortex'')
205
206# PCI Ethernet NICs that use the common MII bus controller code.
207# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
208device miibus # MII bus support
43c2aeb0 209device bce # Broadcom NetXtreme II Gigabit Ethernet
7f186839 210device bfe # Broadcom BCM440x 10/100 Ethernet
984263bc
MD
211device dc # DEC/Intel 21143 and various workalikes
212device fxp # Intel EtherExpress PRO/100B (82557, 82558)
213device pcn # AMD Am79C97x PCI 10/100 NICs
214device rl # RealTek 8129/8139
3e201bae 215device re # RealTek 8139C+/8169
984263bc
MD
216device sf # Adaptec AIC-6915 (``Starfire'')
217device sis # Silicon Integrated Systems SiS 900/SiS 7016
0db5ca13 218device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
984263bc
MD
219device ste # Sundance ST201 (D-Link DFE-550TX)
220device tl # Texas Instruments ThunderLAN
221device tx # SMC EtherPower II (83c170 ``EPIC'')
13bca4c6 222device vge # VIA 612x GigE
984263bc
MD
223device vr # VIA Rhine, Rhine II
224device wb # Winbond W89C840F
225device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
226device bge # Broadcom BCM570x (``Tigon III'')
1da2c9db 227device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
984263bc
MD
228
229# ISA Ethernet NICs.
230# 'device ed' requires 'device miibus'
231device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
232device ex
233device ep
234device fe0 at isa? disable port 0x300
235# Xircom Ethernet
236device xe
841ab66c
SZ
237
238# Wireless NIC cards
239device wlan # 802.11 support
240device wlan_ccmp # 802.11 CCMP support
241device wlan_tkip # 802.11 TKIP support
242device wlan_wep # 802.11 WEP support
428b19ed
SZ
243# 802.11 TX rate control algorithms
244#device wlan_ratectl_amrr # AMRR
245device wlan_ratectl_onoe # Onoe
0dba45fe 246device wlan_ratectl_sample # Sample
ac6da0a9 247
841ab66c 248# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
984263bc
MD
249# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
250# mode (the factory default). If you set the switches on your ISA
251# card for a manually chosen I/O address and IRQ, you must specify
252# those parameters here.
253device an
45e7728a 254device awi # PRISM I IEEE 802.11b wireless NIC
5fdff524 255device ral # Ralink Technology 802.11 wireless NIC
0dba45fe
SZ
256 # Requires wlan_ratectl_onoe and
257 # wlan_ratectl_sample
428b19ed 258device rtw # RealTek 802.11 wireless NIC
2fc6d79d 259 # Requires wlan_ratectl_onoe and wlan_wep
841ab66c
SZ
260# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
261# exists only as a PCMCIA device, so there is no ISA attachment needed
262# and resources will always be dynamically assigned by the pccard code.
263device wi
264
984263bc
MD
265# The probe order of these is presently determined by i386/isa/isa_compat.c.
266device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
267#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
268device lnc0 at isa? disable port 0x280 irq 10 drq 0
269device cs0 at isa? disable port 0x300
270device sn0 at isa? disable port 0x300 irq 10
271
272# Pseudo devices - the number indicates how many units to allocate.
273pseudo-device loop # Network loopback
274pseudo-device ether # Ethernet support
275pseudo-device sl 1 # Kernel SLIP
276pseudo-device ppp 1 # Kernel PPP
277pseudo-device tun # Packet tunnel.
278pseudo-device pty # Pseudo-ttys (telnet etc)
279pseudo-device md # Memory "disks"
280pseudo-device gif # IPv6 and IPv4 tunneling
281pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
282
283# The `bpf' pseudo-device enables the Berkeley Packet Filter.
284# Be aware of the administrative consequences of enabling this!
285pseudo-device bpf #Berkeley packet filter
286
acffed4b
JS
287pseudo-device crypto # core crypto support, used by wlan
288
984263bc
MD
289# USB support
290device uhci # UHCI PCI->USB interface
291device ohci # OHCI PCI->USB interface
292device usb # USB Bus (required)
293device ugen # Generic
294device uhid # "Human Interface Devices"
295device ukbd # Keyboard
296device ulpt # Printer
297device umass # Disks/Mass storage - Requires scbus and da
298device ums # Mouse
299device uscanner # Scanners
300device urio # Diamond Rio MP3 Player
301# USB Ethernet, requires mii
302device aue # ADMtek USB ethernet
204496c7 303device axe # ASIX Electronics USB Ethernet
984263bc
MD
304device cue # CATC USB ethernet
305device kue # Kawasaki LSI USB ethernet
3c374c15 306device rue # RealTek 8150 based USB ethernet
428b19ed
SZ
307# USB wireless NICs, requires wlan, wlan_ratectl_onoe
308device rum # Ralink Technology RT2501USB/RT2601USB
309device ural # Ralink Technology RT2500USB
984263bc
MD
310
311# FireWire support
312device firewire # FireWire bus code
313device sbp # SCSI over FireWire (Requires scbus and da)
314device fwe # Ethernet over FireWire (non-standard!)