projects / dragonfly.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | history | HEAD
DEVFS - remove dev_ops_add(), dev_ops_get(), and get_dev()
[dragonfly.git] / sys / dev / misc / psm / psm.c
CommitLineData
984263bc
MD		 1/*-
2 * Copyright (c) 1992, 1993 Erik Forsberg.
3 * Copyright (c) 1996, 1997 Kazutaka YOKOTA.
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 *
12 * THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
13 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
14 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
15 * NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
16 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
17 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
18 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
19 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
20 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
21 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
22 *
f46756f3 23 * $FreeBSD: src/sys/isa/psm.c,v 1.23.2.7 2003/11/12 04:26:26 mikeh Exp $
74b1bf1a 24 * $DragonFly: src/sys/dev/misc/psm/psm.c,v 1.25 2007/06/13 17:15:25 dillon Exp $
984263bc
MD		 25 */
26
27/*
28 * Ported to 386bsd Oct 17, 1992
29 * Sandi Donno, Computer Science, University of Cape Town, South Africa
30 * Please send bug reports to sandi@cs.uct.ac.za
31 *
32 * Thanks are also due to Rick Macklem, rick@snowhite.cis.uoguelph.ca -
33 * although I was only partially successful in getting the alpha release
34 * of his "driver for the Logitech and ATI Inport Bus mice for use with
35 * 386bsd and the X386 port" to work with my Microsoft mouse, I nevertheless
36 * found his code to be an invaluable reference when porting this driver
37 * to 386bsd.
38 *
39 * Further modifications for latest 386BSD+patchkit and port to NetBSD,
40 * Andrew Herbert <andrew@werple.apana.org.au> - 8 June 1993
41 *
42 * Cloned from the Microsoft Bus Mouse driver, also by Erik Forsberg, by
43 * Andrew Herbert - 12 June 1993
44 *
45 * Modified for PS/2 mouse by Charles Hannum <mycroft@ai.mit.edu>
46 * - 13 June 1993
47 *
48 * Modified for PS/2 AUX mouse by Shoji Yuen <yuen@nuie.nagoya-u.ac.jp>
49 * - 24 October 1993
50 *
51 * Hardware access routines and probe logic rewritten by
52 * Kazutaka Yokota <yokota@zodiac.mech.utsunomiya-u.ac.jp>
53 * - 3, 14, 22 October 1996.
54 * - 12 November 1996. IOCTLs and rearranging `psmread', `psmioctl'...
55 * - 14, 30 November 1996. Uses `kbdio.c'.
56 * - 13 December 1996. Uses queuing version of `kbdio.c'.
57 * - January/February 1997. Tweaked probe logic for
58 * HiNote UltraII/Latitude/Armada laptops.
59 * - 30 July 1997. Added APM support.
60 * - 5 March 1997. Defined driver configuration flags (PSM_CONFIG_XXX).
61 * Improved sync check logic.
62 * Vendor specific support routines.
63 */
64
65#include "opt_psm.h"
66
67#include <sys/param.h>
68#include <sys/systm.h>
69#include <sys/kernel.h>
70#include <sys/module.h>
71#include <sys/bus.h>
72#include <sys/conf.h>
fef8985e 73#include <sys/device.h>
984263bc
MD		 74#include <sys/poll.h>
75#include <sys/syslog.h>
76#include <sys/malloc.h>
984263bc 77#include <sys/rman.h>
9183fa5b 78#include <sys/selinfo.h>
a6f9c039 79#include <sys/thread2.h>
984263bc
MD		 80#include <sys/time.h>
81#include <sys/uio.h>
82
83#include <machine/clock.h>
84#include <machine/limits.h>
85#include <machine/mouse.h>
984263bc 86
1f2de5d4
MD		 87#include <bus/isa/isavar.h>
88#include <dev/misc/kbd/atkbdcreg.h>
984263bc
MD		 89
90/*
91 * Driver specific options: the following options may be set by
92 * `options' statements in the kernel configuration file.
93 */
94
95/* debugging */
96#ifndef PSM_DEBUG
97#define PSM_DEBUG 0 /* logging: 0: none, 1: brief, 2: verbose */
98#endif
99
100#ifndef PSM_SYNCERR_THRESHOLD1
101#define PSM_SYNCERR_THRESHOLD1 20
102#endif
103
104#ifndef PSM_INPUT_TIMEOUT
105#define PSM_INPUT_TIMEOUT 2000000 /* 2 sec */
106#endif
107
108/* end of driver specific options */
109
110#define PSM_DRIVER_NAME "psm"
111#define PSMCPNP_DRIVER_NAME "psmcpnp"
112
113/* input queue */
114#define PSM_BUFSIZE 960
115#define PSM_SMALLBUFSIZE 240
116
117/* operation levels */
118#define PSM_LEVEL_BASE 0
119#define PSM_LEVEL_STANDARD 1
120#define PSM_LEVEL_NATIVE 2
121#define PSM_LEVEL_MIN PSM_LEVEL_BASE
122#define PSM_LEVEL_MAX PSM_LEVEL_NATIVE
123
124/* Logitech PS2++ protocol */
125#define MOUSE_PS2PLUS_CHECKBITS(b) \
126 ((((b[2] & 0x03) << 2) | 0x02) == (b[1] & 0x0f))
127#define MOUSE_PS2PLUS_PACKET_TYPE(b) \
128 (((b[0] & 0x30) >> 2) | ((b[1] & 0x30) >> 4))
129
130/* some macros */
131#define PSM_UNIT(dev) (minor(dev) >> 1)
132#define PSM_NBLOCKIO(dev) (minor(dev) & 1)
e4c9c0c8 133#define PSM_MKMINOR(unit,block) ((((unit) & 0xff) << 1) | ((block) ? 0:1))
984263bc
MD		 134
135#ifndef max
136#define max(x,y) ((x) > (y) ? (x) : (y))
137#endif
138#ifndef min
139#define min(x,y) ((x) < (y) ? (x) : (y))
140#endif
141
142#define abs(x) (((x) < 0) ? -(x) : (x))
143
144/* ring buffer */
145typedef struct ringbuf {
146 int count; /* # of valid elements in the buffer */
147 int head; /* head pointer */
148 int tail; /* tail poiner */
149 unsigned char buf[PSM_BUFSIZE];
150} ringbuf_t;
151
152/* driver control block */
153struct psm_softc { /* Driver status information */
154 int unit;
155 struct selinfo rsel; /* Process selecting for Input */
156 unsigned char state; /* Mouse driver state */
157 int config; /* driver configuration flags */
158 int flags; /* other flags */
159 KBDC kbdc; /* handle to access the keyboard controller */
160 struct resource *intr; /* IRQ resource */
161 void *ih; /* interrupt handle */
162 mousehw_t hw; /* hardware information */
163 mousemode_t mode; /* operation mode */
164 mousemode_t dflt_mode; /* default operation mode */
165 mousestatus_t status; /* accumulated mouse movement */
166 ringbuf_t queue; /* mouse status queue */
167 unsigned char ipacket[16]; /* interim input buffer */
168 int inputbytes; /* # of bytes in the input buffer */
169 int button; /* the latest button state */
170 int xold; /* previous absolute X position */
171 int yold; /* previous absolute Y position */
172 int syncerrors;
173 struct timeval inputtimeout;
174 int watchdog; /* watchdog timer flag */
da8ef4a8 175 struct callout callout; /* watchdog timer call out */
984263bc
MD		 176};
177devclass_t psm_devclass;
178#define PSM_SOFTC(unit) ((struct psm_softc*)devclass_get_softc(psm_devclass, unit))
179
180/* driver state flags (state) */
181#define PSM_VALID 0x80
182#define PSM_OPEN 1 /* Device is open */
183#define PSM_ASLP 2 /* Waiting for mouse data */
184
185/* driver configuration flags (config) */
186#define PSM_CONFIG_RESOLUTION 0x000f /* resolution */
187#define PSM_CONFIG_ACCEL 0x00f0 /* acceleration factor */
188#define PSM_CONFIG_NOCHECKSYNC 0x0100 /* disable sync. test */
189#define PSM_CONFIG_NOIDPROBE 0x0200 /* disable mouse model probe */
190#define PSM_CONFIG_NORESET 0x0400 /* don't reset the mouse */
191#define PSM_CONFIG_FORCETAP 0x0800 /* assume `tap' action exists */
192#define PSM_CONFIG_IGNPORTERROR 0x1000 /* ignore error in aux port test */
193#define PSM_CONFIG_HOOKRESUME 0x2000 /* hook the system resume event */
194#define PSM_CONFIG_INITAFTERSUSPEND 0x4000 /* init the device at the resume event */
195#define PSM_CONFIG_SYNCHACK 0x8000 /* enable `out-of-sync' hack */
196
197#define PSM_CONFIG_FLAGS (PSM_CONFIG_RESOLUTION \
198 | PSM_CONFIG_ACCEL \
199 | PSM_CONFIG_NOCHECKSYNC \
200 | PSM_CONFIG_SYNCHACK \
201 | PSM_CONFIG_NOIDPROBE \
202 | PSM_CONFIG_NORESET \
203 | PSM_CONFIG_FORCETAP \
204 | PSM_CONFIG_IGNPORTERROR \
205 | PSM_CONFIG_HOOKRESUME \
206 | PSM_CONFIG_INITAFTERSUSPEND)
207
208/* other flags (flags) */
209#define PSM_FLAGS_FINGERDOWN 0x0001 /* VersaPad finger down */
210
211/* for backward compatibility */
212#define OLD_MOUSE_GETHWINFO _IOR('M', 1, old_mousehw_t)
213#define OLD_MOUSE_GETMODE _IOR('M', 2, old_mousemode_t)
214#define OLD_MOUSE_SETMODE _IOW('M', 3, old_mousemode_t)
215
216typedef struct old_mousehw {
217 int buttons;
218 int iftype;
219 int type;
220 int hwid;
221} old_mousehw_t;
222
223typedef struct old_mousemode {
224 int protocol;
225 int rate;
226 int resolution;
227 int accelfactor;
228} old_mousemode_t;
229
230/* packet formatting function */
38e94a25
RG		 231typedef int packetfunc_t (struct psm_softc *, unsigned char *,
232 int *, int, mousestatus_t *);
984263bc
MD		 233
234/* function prototypes */
38e94a25
RG		 235static int psmprobe (device_t);
236static int psmattach (device_t);
237static int psmdetach (device_t);
238static int psmresume (device_t);
984263bc
MD		 239
240static d_open_t psmopen;
241static d_close_t psmclose;
242static d_read_t psmread;
243static d_ioctl_t psmioctl;
244static d_poll_t psmpoll;
245
38e94a25
RG		 246static int enable_aux_dev (KBDC);
247static int disable_aux_dev (KBDC);
248static int get_mouse_status (KBDC, int *, int, int);
249static int get_aux_id (KBDC);
250static int set_mouse_sampling_rate (KBDC, int);
251static int set_mouse_scaling (KBDC, int);
252static int set_mouse_resolution (KBDC, int);
253static int set_mouse_mode (KBDC);
254static int get_mouse_buttons (KBDC);
255static int is_a_mouse (int);
256static void recover_from_error (KBDC);
257static int restore_controller (KBDC, int);
258static int doinitialize (struct psm_softc *, mousemode_t *);
259static int doopen (struct psm_softc *, int);
260static int reinitialize (struct psm_softc *, int);
261static char *model_name (int);
262static void psmintr (void *);
263static void psmtimeout (void *);
984263bc
MD		 264
265/* vendor specific features */
38e94a25 266typedef int probefunc_t (struct psm_softc *);
984263bc 267
38e94a25
RG		 268static int mouse_id_proc1 (KBDC, int, int, int *);
269static int mouse_ext_command (KBDC, int);
984263bc
MD		 270static probefunc_t enable_groller;
271static probefunc_t enable_gmouse;
272static probefunc_t enable_aglide;
273static probefunc_t enable_kmouse;
274static probefunc_t enable_msexplorer;
275static probefunc_t enable_msintelli;
276static probefunc_t enable_4dmouse;
277static probefunc_t enable_4dplus;
278static probefunc_t enable_mmanplus;
279static probefunc_t enable_versapad;
38e94a25 280static int tame_mouse (struct psm_softc *, mousestatus_t *, unsigned char *);
984263bc
MD		 281
282static struct {
283 int model;
284 unsigned char syncmask;
285 int packetsize;
286 probefunc_t *probefunc;
287} vendortype[] = {
288 /*
289 * WARNING: the order of probe is very important. Don't mess it
290 * unless you know what you are doing.
291 */
292 { MOUSE_MODEL_NET, /* Genius NetMouse */
293 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_gmouse, },
294 { MOUSE_MODEL_NETSCROLL, /* Genius NetScroll */
295 0xc8, 6, enable_groller, },
296 { MOUSE_MODEL_MOUSEMANPLUS, /* Logitech MouseMan+ */
297 0x08, MOUSE_PS2_PACKETSIZE, enable_mmanplus, },
298 { MOUSE_MODEL_EXPLORER, /* Microsoft IntelliMouse Explorer */
299 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msexplorer, },
300 { MOUSE_MODEL_4D, /* A4 Tech 4D Mouse */
301 0x08, MOUSE_4D_PACKETSIZE, enable_4dmouse, },
302 { MOUSE_MODEL_4DPLUS, /* A4 Tech 4D+ Mouse */
303 0xc8, MOUSE_4DPLUS_PACKETSIZE, enable_4dplus, },
304 { MOUSE_MODEL_INTELLI, /* Microsoft IntelliMouse */
305 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msintelli, },
306 { MOUSE_MODEL_GLIDEPOINT, /* ALPS GlidePoint */
307 0xc0, MOUSE_PS2_PACKETSIZE, enable_aglide, },
308 { MOUSE_MODEL_THINK, /* Kensignton ThinkingMouse */
309 0x80, MOUSE_PS2_PACKETSIZE, enable_kmouse, },
310 { MOUSE_MODEL_VERSAPAD, /* Interlink electronics VersaPad */
311 0xe8, MOUSE_PS2VERSA_PACKETSIZE, enable_versapad, },
312 { MOUSE_MODEL_GENERIC,
313 0xc0, MOUSE_PS2_PACKETSIZE, NULL, },
314};
315#define GENERIC_MOUSE_ENTRY ((sizeof(vendortype) / sizeof(*vendortype)) - 1)
316
317/* device driver declarateion */
318static device_method_t psm_methods[] = {
319 /* Device interface */
320 DEVMETHOD(device_probe, psmprobe),
321 DEVMETHOD(device_attach, psmattach),
322 DEVMETHOD(device_detach, psmdetach),
323 DEVMETHOD(device_resume, psmresume),
324
325 { 0, 0 }
326};
327
328static driver_t psm_driver = {
329 PSM_DRIVER_NAME,
330 psm_methods,
331 sizeof(struct psm_softc),
332};
333
334#if notyet
335static struct isa_pnp_id psm_ids[] = {
336 { 0x130fd041, "PS/2 mouse port" }, /* PNP0F13 */
337 { 0x1303d041, "PS/2 port" }, /* PNP0313, XXX */
338 { 0 }
339};
340#endif
341
342#define CDEV_MAJOR 21
343
fef8985e
MD		 344static struct dev_ops psm_ops = {
345 { PSM_DRIVER_NAME, CDEV_MAJOR, 0 },
346 .d_open = psmopen,
347 .d_close = psmclose,
348 .d_read = psmread,
349 .d_ioctl = psmioctl,
350 .d_poll = psmpoll,
984263bc
MD		 351};
352
353/* debug message level */
354static int verbose = PSM_DEBUG;
355
356/* device I/O routines */
357static int
358enable_aux_dev(KBDC kbdc)
359{
360 int res;
361
362 res = send_aux_command(kbdc, PSMC_ENABLE_DEV);
363 if (verbose >= 2)
364 log(LOG_DEBUG, "psm: ENABLE_DEV return code:%04x\n", res);
365
366 return (res == PSM_ACK);
367}
368
369static int
370disable_aux_dev(KBDC kbdc)
371{
372 int res;
373
374 res = send_aux_command(kbdc, PSMC_DISABLE_DEV);
375 if (verbose >= 2)
376 log(LOG_DEBUG, "psm: DISABLE_DEV return code:%04x\n", res);
377
378 return (res == PSM_ACK);
379}
380
381static int
382get_mouse_status(KBDC kbdc, int *status, int flag, int len)
383{
384 int cmd;
385 int res;
386 int i;
387
388 switch (flag) {
389 case 0:
390 default:
391 cmd = PSMC_SEND_DEV_STATUS;
392 break;
393 case 1:
394 cmd = PSMC_SEND_DEV_DATA;
395 break;
396 }
397 empty_aux_buffer(kbdc, 5);
398 res = send_aux_command(kbdc, cmd);
399 if (verbose >= 2)
400 log(LOG_DEBUG, "psm: SEND_AUX_DEV_%s return code:%04x\n",
401 (flag == 1) ? "DATA" : "STATUS", res);
402 if (res != PSM_ACK)
403 return 0;
404
405 for (i = 0; i < len; ++i) {
406 status[i] = read_aux_data(kbdc);
407 if (status[i] < 0)
408 break;
409 }
410
411 if (verbose) {
412 log(LOG_DEBUG, "psm: %s %02x %02x %02x\n",
413 (flag == 1) ? "data" : "status", status[0], status[1], status[2]);
414 }
415
416 return i;
417}
418
419static int
420get_aux_id(KBDC kbdc)
421{
422 int res;
423 int id;
424
425 empty_aux_buffer(kbdc, 5);
426 res = send_aux_command(kbdc, PSMC_SEND_DEV_ID);
427 if (verbose >= 2)
428 log(LOG_DEBUG, "psm: SEND_DEV_ID return code:%04x\n", res);
429 if (res != PSM_ACK)
430 return (-1);
431
432 /* 10ms delay */
dbcd0c9b 433 DRIVERSLEEP(10000);
984263bc
MD		 434
435 id = read_aux_data(kbdc);
436 if (verbose >= 2)
437 log(LOG_DEBUG, "psm: device ID: %04x\n", id);
438
439 return id;
440}
441
442static int
443set_mouse_sampling_rate(KBDC kbdc, int rate)
444{
445 int res;
446
447 res = send_aux_command_and_data(kbdc, PSMC_SET_SAMPLING_RATE, rate);
448 if (verbose >= 2)
449 log(LOG_DEBUG, "psm: SET_SAMPLING_RATE (%d) %04x\n", rate, res);
450
451 return ((res == PSM_ACK) ? rate : -1);
452}
453
454static int
455set_mouse_scaling(KBDC kbdc, int scale)
456{
457 int res;
458
459 switch (scale) {
460 case 1:
461 default:
462 scale = PSMC_SET_SCALING11;
463 break;
464 case 2:
465 scale = PSMC_SET_SCALING21;
466 break;
467 }
468 res = send_aux_command(kbdc, scale);
469 if (verbose >= 2)
470 log(LOG_DEBUG, "psm: SET_SCALING%s return code:%04x\n",
471 (scale == PSMC_SET_SCALING21) ? "21" : "11", res);
472
473 return (res == PSM_ACK);
474}
475
476/* `val' must be 0 through PSMD_MAX_RESOLUTION */
477static int
478set_mouse_resolution(KBDC kbdc, int val)
479{
480 int res;
481
482 res = send_aux_command_and_data(kbdc, PSMC_SET_RESOLUTION, val);
483 if (verbose >= 2)
484 log(LOG_DEBUG, "psm: SET_RESOLUTION (%d) %04x\n", val, res);
485
486 return ((res == PSM_ACK) ? val : -1);
487}
488
489/*
490 * NOTE: once `set_mouse_mode()' is called, the mouse device must be
491 * re-enabled by calling `enable_aux_dev()'
492 */
493static int
494set_mouse_mode(KBDC kbdc)
495{
496 int res;
497
498 res = send_aux_command(kbdc, PSMC_SET_STREAM_MODE);
499 if (verbose >= 2)
500 log(LOG_DEBUG, "psm: SET_STREAM_MODE return code:%04x\n", res);
501
502 return (res == PSM_ACK);
503}
504
505static int
506get_mouse_buttons(KBDC kbdc)
507{
508 int c = 2; /* assume two buttons by default */
509 int status[3];
510
511 /*
512 * NOTE: a special sequence to obtain Logitech Mouse specific
513 * information: set resolution to 25 ppi, set scaling to 1:1, set
514 * scaling to 1:1, set scaling to 1:1. Then the second byte of the
515 * mouse status bytes is the number of available buttons.
516 * Some manufactures also support this sequence.
517 */
518 if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW)
519 return c;
520 if (set_mouse_scaling(kbdc, 1) && set_mouse_scaling(kbdc, 1)
521 && set_mouse_scaling(kbdc, 1)
522 && (get_mouse_status(kbdc, status, 0, 3) >= 3)) {
523 if (status[1] != 0)
524 return status[1];
525 }
526 return c;
527}
528
529/* misc subroutines */
530/*
531 * Someday, I will get the complete list of valid pointing devices and
532 * their IDs... XXX
533 */
534static int
535is_a_mouse(int id)
536{
537#if 0
538 static int valid_ids[] = {
539 PSM_MOUSE_ID, /* mouse */
540 PSM_BALLPOINT_ID, /* ballpoint device */
541 PSM_INTELLI_ID, /* Intellimouse */
542 PSM_EXPLORER_ID, /* Intellimouse Explorer */
543 -1 /* end of table */
544 };
545 int i;
546
547 for (i = 0; valid_ids[i] >= 0; ++i)
548 if (valid_ids[i] == id)
549 return TRUE;
550 return FALSE;
551#else
552 return TRUE;
553#endif
554}
555
556static char *
557model_name(int model)
558{
559 static struct {
560 int model_code;
561 char *model_name;
562 } models[] = {
563 { MOUSE_MODEL_NETSCROLL, "NetScroll" },
564 { MOUSE_MODEL_NET, "NetMouse/NetScroll Optical" },
565 { MOUSE_MODEL_GLIDEPOINT, "GlidePoint" },
566 { MOUSE_MODEL_THINK, "ThinkingMouse" },
567 { MOUSE_MODEL_INTELLI, "IntelliMouse" },
568 { MOUSE_MODEL_MOUSEMANPLUS, "MouseMan+" },
569 { MOUSE_MODEL_VERSAPAD, "VersaPad" },
570 { MOUSE_MODEL_EXPLORER, "IntelliMouse Explorer" },
571 { MOUSE_MODEL_4D, "4D Mouse" },
572 { MOUSE_MODEL_4DPLUS, "4D+ Mouse" },
573 { MOUSE_MODEL_GENERIC, "Generic PS/2 mouse" },
574 { MOUSE_MODEL_UNKNOWN, NULL },
575 };
576 int i;
577
578 for (i = 0; models[i].model_code != MOUSE_MODEL_UNKNOWN; ++i) {
579 if (models[i].model_code == model)
580 return models[i].model_name;
581 }
582 return "Unknown";
583}
584
585static void
586recover_from_error(KBDC kbdc)
587{
588 /* discard anything left in the output buffer */
589 empty_both_buffers(kbdc, 10);
590
591#if 0
592 /*
593 * NOTE: KBDC_RESET_KBD may not restore the communication between the
594 * keyboard and the controller.
595 */
596 reset_kbd(kbdc);
597#else
598 /*
599 * NOTE: somehow diagnostic and keyboard port test commands bring the
600 * keyboard back.
601 */
602 if (!test_controller(kbdc))
603 log(LOG_ERR, "psm: keyboard controller failed.\n");
604 /* if there isn't a keyboard in the system, the following error is OK */
605 if (test_kbd_port(kbdc) != 0) {
606 if (verbose)
607 log(LOG_ERR, "psm: keyboard port failed.\n");
608 }
609#endif
610}
611
612static int
613restore_controller(KBDC kbdc, int command_byte)
614{
615 empty_both_buffers(kbdc, 10);
616
617 if (!set_controller_command_byte(kbdc, 0xff, command_byte)) {
618 log(LOG_ERR, "psm: failed to restore the keyboard controller "
619 "command byte.\n");
620 empty_both_buffers(kbdc, 10);
621 return FALSE;
622 } else {
623 empty_both_buffers(kbdc, 10);
624 return TRUE;
625 }
626}
627
628/*
629 * Re-initialize the aux port and device. The aux port must be enabled
630 * and its interrupt must be disabled before calling this routine.
631 * The aux device will be disabled before returning.
632 * The keyboard controller must be locked via `kbdc_lock()' before
633 * calling this routine.
634 */
635static int
636doinitialize(struct psm_softc *sc, mousemode_t *mode)
637{
638 KBDC kbdc = sc->kbdc;
639 int stat[3];
640 int i;
641
642 switch((i = test_aux_port(kbdc))) {
643 case 1: /* ignore this error */
1a4bbccf
EN		 644 case 2: /* Ignore 2 and 3 for use with some acer and compal laptops */
645 case 3:
984263bc
MD		 646 case PSM_ACK:
647 if (verbose)
648 log(LOG_DEBUG, "psm%d: strange result for test aux port (%d).\n",
649 sc->unit, i);
650 /* fall though */
651 case 0: /* no error */
652 break;
653 case -1: /* time out */
654 default: /* error */
655 recover_from_error(kbdc);
656 if (sc->config & PSM_CONFIG_IGNPORTERROR)
657 break;
658 log(LOG_ERR, "psm%d: the aux port is not functioning (%d).\n",
659 sc->unit, i);
660 return FALSE;
661 }
662
663 if (sc->config & PSM_CONFIG_NORESET) {
664 /*
665 * Don't try to reset the pointing device. It may possibly be
666 * left in the unknown state, though...
667 */
668 } else {
669 /*
670 * NOTE: some controllers appears to hang the `keyboard' when
671 * the aux port doesn't exist and `PSMC_RESET_DEV' is issued.
672 */
673 if (!reset_aux_dev(kbdc)) {
674 recover_from_error(kbdc);
675 log(LOG_ERR, "psm%d: failed to reset the aux device.\n", sc->unit);
676 return FALSE;
677 }
678 }
679
680 /*
681 * both the aux port and the aux device is functioning, see
682 * if the device can be enabled.
683 */
684 if (!enable_aux_dev(kbdc) || !disable_aux_dev(kbdc)) {
685 log(LOG_ERR, "psm%d: failed to enable the aux device.\n", sc->unit);
686 return FALSE;
687 }
688 empty_both_buffers(kbdc, 10); /* remove stray data if any */
689
690 if (sc->config & PSM_CONFIG_NOIDPROBE) {
691 i = GENERIC_MOUSE_ENTRY;
692 } else {
693 /* FIXME: hardware ID, mouse buttons? */
694
695 /* other parameters */
696 for (i = 0; vendortype[i].probefunc != NULL; ++i) {
697 if ((*vendortype[i].probefunc)(sc)) {
698 if (verbose >= 2)
699 log(LOG_ERR, "psm%d: found %s\n",
700 sc->unit, model_name(vendortype[i].model));
701 break;
702 }
703 }
704 }
705
706 sc->hw.model = vendortype[i].model;
707 sc->mode.packetsize = vendortype[i].packetsize;
708
709 /* set mouse parameters */
2038fb68 710 if (mode != NULL) {
984263bc
MD		 711 if (mode->rate > 0)
712 mode->rate = set_mouse_sampling_rate(kbdc, mode->rate);
713 if (mode->resolution >= 0)
714 mode->resolution = set_mouse_resolution(kbdc, mode->resolution);
715 set_mouse_scaling(kbdc, 1);
716 set_mouse_mode(kbdc);
717 }
718
719 /* request a data packet and extract sync. bits */
720 if (get_mouse_status(kbdc, stat, 1, 3) < 3) {
721 log(LOG_DEBUG, "psm%d: failed to get data (doinitialize).\n",
722 sc->unit);
723 sc->mode.syncmask[0] = 0;
724 } else {
725 sc->mode.syncmask[1] = stat[0] & sc->mode.syncmask[0]; /* syncbits */
726 /* the NetScroll Mouse will send three more bytes... Ignore them */
727 empty_aux_buffer(kbdc, 5);
728 }
729
730 /* just check the status of the mouse */
731 if (get_mouse_status(kbdc, stat, 0, 3) < 3)
732 log(LOG_DEBUG, "psm%d: failed to get status (doinitialize).\n",
733 sc->unit);
734
735 return TRUE;
736}
737
738static int
739doopen(struct psm_softc *sc, int command_byte)
740{
741 int stat[3];
742
743 /* enable the mouse device */
744 if (!enable_aux_dev(sc->kbdc)) {
745 /* MOUSE ERROR: failed to enable the mouse because:
746 * 1) the mouse is faulty,
747 * 2) the mouse has been removed(!?)
748 * In the latter case, the keyboard may have hung, and need
749 * recovery procedure...
750 */
751 recover_from_error(sc->kbdc);
752#if 0
753 /* FIXME: we could reset the mouse here and try to enable
754 * it again. But it will take long time and it's not a good
755 * idea to disable the keyboard that long...
756 */
757 if (!doinitialize(sc, &sc->mode) || !enable_aux_dev(sc->kbdc)) {
758 recover_from_error(sc->kbdc);
759#else
760 {
761#endif
762 restore_controller(sc->kbdc, command_byte);
763 /* mark this device is no longer available */
764 sc->state &= ~PSM_VALID;
765 log(LOG_ERR, "psm%d: failed to enable the device (doopen).\n",
766 sc->unit);
767 return (EIO);
768 }
769 }
770
771 if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
772 log(LOG_DEBUG, "psm%d: failed to get status (doopen).\n", sc->unit);
773
774 /* enable the aux port and interrupt */
775 if (!set_controller_command_byte(sc->kbdc,
776 kbdc_get_device_mask(sc->kbdc),
777 (command_byte & KBD_KBD_CONTROL_BITS)
778 | KBD_ENABLE_AUX_PORT | KBD_ENABLE_AUX_INT)) {
779 /* CONTROLLER ERROR */
780 disable_aux_dev(sc->kbdc);
781 restore_controller(sc->kbdc, command_byte);
782 log(LOG_ERR, "psm%d: failed to enable the aux interrupt (doopen).\n",
783 sc->unit);
784 return (EIO);
785 }
786
787 /* start the watchdog timer */
788 sc->watchdog = FALSE;
da8ef4a8 789 callout_reset(&sc->callout, hz * 2, psmtimeout, (void *)(uintptr_t)sc);
984263bc
MD		 790
791 return (0);
792}
793
794static int
795reinitialize(struct psm_softc *sc, int doinit)
796{
797 int err;
798 int c;
984263bc
MD		 799
800 /* don't let anybody mess with the aux device */
801 if (!kbdc_lock(sc->kbdc, TRUE))
802 return (EIO);
a6f9c039 803 crit_enter();
984263bc
MD		 804
805 /* block our watchdog timer */
806 sc->watchdog = FALSE;
da8ef4a8 807 callout_stop(&sc->callout);
984263bc
MD		 808
809 /* save the current controller command byte */
810 empty_both_buffers(sc->kbdc, 10);
811 c = get_controller_command_byte(sc->kbdc);
812 if (verbose >= 2)
813 log(LOG_DEBUG, "psm%d: current command byte: %04x (reinitialize).\n",
814 sc->unit, c);
815
816 /* enable the aux port but disable the aux interrupt and the keyboard */
817 if ((c == -1) || !set_controller_command_byte(sc->kbdc,
818 kbdc_get_device_mask(sc->kbdc),
819 KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT
820 | KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
821 /* CONTROLLER ERROR */
a6f9c039 822 crit_exit();
984263bc
MD		 823 kbdc_lock(sc->kbdc, FALSE);
824 log(LOG_ERR, "psm%d: unable to set the command byte (reinitialize).\n",
825 sc->unit);
826 return (EIO);
827 }
828
829 /* flush any data */
830 if (sc->state & PSM_VALID) {
831 disable_aux_dev(sc->kbdc); /* this may fail; but never mind... */
832 empty_aux_buffer(sc->kbdc, 10);
833 }
834 sc->inputbytes = 0;
835 sc->syncerrors = 0;
836
837 /* try to detect the aux device; are you still there? */
838 err = 0;
839 if (doinit) {
840 if (doinitialize(sc, &sc->mode)) {
841 /* yes */
842 sc->state |= PSM_VALID;
843 } else {
844 /* the device has gone! */
845 restore_controller(sc->kbdc, c);
846 sc->state &= ~PSM_VALID;
847 log(LOG_ERR, "psm%d: the aux device has gone! (reinitialize).\n",
848 sc->unit);
849 err = ENXIO;
850 }
851 }
a6f9c039 852 crit_exit();
984263bc
MD		 853
854 /* restore the driver state */
855 if ((sc->state & PSM_OPEN) && (err == 0)) {
856 /* enable the aux device and the port again */
857 err = doopen(sc, c);
858 if (err != 0)
859 log(LOG_ERR, "psm%d: failed to enable the device (reinitialize).\n",
860 sc->unit);
861 } else {
862 /* restore the keyboard port and disable the aux port */
863 if (!set_controller_command_byte(sc->kbdc,
864 kbdc_get_device_mask(sc->kbdc),
865 (c & KBD_KBD_CONTROL_BITS)
866 | KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
867 /* CONTROLLER ERROR */
868 log(LOG_ERR, "psm%d: failed to disable the aux port (reinitialize).\n",
869 sc->unit);
870 err = EIO;
871 }
872 }
873
874 kbdc_lock(sc->kbdc, FALSE);
875 return (err);
876}
877
878/* psm driver entry points */
879
880#define endprobe(v) { if (bootverbose) \
881 --verbose; \
882 kbdc_set_device_mask(sc->kbdc, mask); \
883 kbdc_lock(sc->kbdc, FALSE); \
884 return (v); \
885 }
886
887static int
888psmprobe(device_t dev)
889{
890 int unit = device_get_unit(dev);
891 struct psm_softc *sc = device_get_softc(dev);
892 uintptr_t irq;
893 uintptr_t flags;
894 int stat[3];
895 int command_byte;
896 int mask;
897 int rid;
898 int i;
899
900#if 0
901 kbdc_debug(TRUE);
902#endif
903
904#if notyet
905 /* check PnP IDs */
906 if (XXX_PNP_PROBE(device_get_parent(dev), dev, psm_ids) == ENXIO)
907 return ENXIO;
908#endif
909
910 BUS_READ_IVAR(device_get_parent(dev), dev, KBDC_IVAR_IRQ, &irq);
911 BUS_READ_IVAR(device_get_parent(dev), dev, KBDC_IVAR_FLAGS, &flags);
912
913 sc->unit = unit;
914 sc->kbdc = atkbdc_open(device_get_unit(device_get_parent(dev)));
915 sc->config = flags & PSM_CONFIG_FLAGS;
916 /* XXX: for backward compatibility */
917#if defined(PSM_HOOKRESUME) || defined(PSM_HOOKAPM)
918 sc->config |=
919#ifdef PSM_RESETAFTERSUSPEND
920 PSM_CONFIG_HOOKRESUME | PSM_CONFIG_INITAFTERSUSPEND;
921#else
922 PSM_CONFIG_HOOKRESUME;
923#endif
924#endif /* PSM_HOOKRESUME | PSM_HOOKAPM */
925 sc->flags = 0;
926 if (bootverbose)
927 ++verbose;
928
929 device_set_desc(dev, "PS/2 Mouse");
930
931 if (!kbdc_lock(sc->kbdc, TRUE)) {
e3869ec7 932 kprintf("psm%d: unable to lock the controller.\n", unit);
984263bc
MD		 933 if (bootverbose)
934 --verbose;
935 return (ENXIO);
936 }
937
938 /*
939 * NOTE: two bits in the command byte controls the operation of the
940 * aux port (mouse port): the aux port disable bit (bit 5) and the aux
941 * port interrupt (IRQ 12) enable bit (bit 2).
942 */
943
944 /* discard anything left after the keyboard initialization */
945 empty_both_buffers(sc->kbdc, 10);
946
947 /* save the current command byte; it will be used later */
948 mask = kbdc_get_device_mask(sc->kbdc) & ~KBD_AUX_CONTROL_BITS;
949 command_byte = get_controller_command_byte(sc->kbdc);
950 if (verbose)
e3869ec7 951 kprintf("psm%d: current command byte:%04x\n", unit, command_byte);
984263bc
MD		 952 if (command_byte == -1) {
953 /* CONTROLLER ERROR */
e3869ec7 954 kprintf("psm%d: unable to get the current command byte value.\n",
984263bc
MD		 955 unit);
956 endprobe(ENXIO);
957 }
958
959 /*
960 * disable the keyboard port while probing the aux port, which must be
961 * enabled during this routine
962 */
963 if (!set_controller_command_byte(sc->kbdc,
964 KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS,
965 KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT
966 | KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
967 /*
968 * this is CONTROLLER ERROR; I don't know how to recover
969 * from this error...
970 */
971 restore_controller(sc->kbdc, command_byte);
e3869ec7 972 kprintf("psm%d: unable to set the command byte.\n", unit);
984263bc
MD		 973 endprobe(ENXIO);
974 }
975 write_controller_command(sc->kbdc, KBDC_ENABLE_AUX_PORT);
976
977 /*
978 * NOTE: `test_aux_port()' is designed to return with zero if the aux
979 * port exists and is functioning. However, some controllers appears
980 * to respond with zero even when the aux port doesn't exist. (It may
981 * be that this is only the case when the controller DOES have the aux
982 * port but the port is not wired on the motherboard.) The keyboard
983 * controllers without the port, such as the original AT, are
984 * supporsed to return with an error code or simply time out. In any
985 * case, we have to continue probing the port even when the controller
986 * passes this test.
987 *
988 * XXX: some controllers erroneously return the error code 1 when
989 * it has the perfectly functional aux port. We have to ignore this
990 * error code. Even if the controller HAS error with the aux port,
991 * it will be detected later...
992 * XXX: another incompatible controller returns PSM_ACK (0xfa)...
993 */
994 switch ((i = test_aux_port(sc->kbdc))) {
995 case 1: /* ignore this error */
1a4bbccf
EN		 996 case 2: /* Ignore 2 and 3 for use with some acer and compal laptops */
997 case 3:
984263bc
MD		 998 case PSM_ACK:
999 if (verbose)
e3869ec7 1000 kprintf("psm%d: strange result for test aux port (%d).\n",
984263bc
MD		 1001 unit, i);
1002 /* fall though */
1003 case 0: /* no error */
1004 break;
1005 case -1: /* time out */
1006 default: /* error */
1007 recover_from_error(sc->kbdc);
1008 if (sc->config & PSM_CONFIG_IGNPORTERROR)
1009 break;
1010 restore_controller(sc->kbdc, command_byte);
1011 if (verbose)
e3869ec7 1012 kprintf("psm%d: the aux port is not functioning (%d).\n",
984263bc
MD		 1013 unit, i);
1014 endprobe(ENXIO);
1015 }
1016
1017 if (sc->config & PSM_CONFIG_NORESET) {
1018 /*
1019 * Don't try to reset the pointing device. It may possibly be
1020 * left in the unknown state, though...
1021 */
1022 } else {
1023 /*
1024 * NOTE: some controllers appears to hang the `keyboard' when the aux
1025 * port doesn't exist and `PSMC_RESET_DEV' is issued.
f46756f3
HP		 1026 *
1027 * Attempt to reset the controller twice -- this helps
1028 * pierce through some KVM switches. The second reset
1029 * is non-fatal.
984263bc
MD		 1030 */
1031 if (!reset_aux_dev(sc->kbdc)) {
1032 recover_from_error(sc->kbdc);
1033 restore_controller(sc->kbdc, command_byte);
1034 if (verbose)
e3869ec7 1035 kprintf("psm%d: failed to reset the aux device.\n", unit);
984263bc 1036 endprobe(ENXIO);
f46756f3
HP		 1037 } else if (!reset_aux_dev(sc->kbdc)) {
1038 recover_from_error(sc->kbdc);
1039 if (verbose >= 2)
e3869ec7 1040 kprintf("psm%d: failed to reset the aux device (2).\n",
f46756f3 1041 unit);
984263bc
MD		 1042 }
1043 }
1044
1045 /*
1046 * both the aux port and the aux device is functioning, see if the
1047 * device can be enabled. NOTE: when enabled, the device will start
1048 * sending data; we shall immediately disable the device once we know
1049 * the device can be enabled.
1050 */
1051 if (!enable_aux_dev(sc->kbdc) || !disable_aux_dev(sc->kbdc)) {
1052 /* MOUSE ERROR */
1053 recover_from_error(sc->kbdc);
1054 restore_controller(sc->kbdc, command_byte);
1055 if (verbose)
e3869ec7 1056 kprintf("psm%d: failed to enable the aux device.\n", unit);
984263bc
MD		 1057 endprobe(ENXIO);
1058 }
1059
1060 /* save the default values after reset */
1061 if (get_mouse_status(sc->kbdc, stat, 0, 3) >= 3) {
1062 sc->dflt_mode.rate = sc->mode.rate = stat[2];
1063 sc->dflt_mode.resolution = sc->mode.resolution = stat[1];
1064 } else {
1065 sc->dflt_mode.rate = sc->mode.rate = -1;
1066 sc->dflt_mode.resolution = sc->mode.resolution = -1;
1067 }
1068
1069 /* hardware information */
1070 sc->hw.iftype = MOUSE_IF_PS2;
1071
1072 /* verify the device is a mouse */
1073 sc->hw.hwid = get_aux_id(sc->kbdc);
1074 if (!is_a_mouse(sc->hw.hwid)) {
1075 restore_controller(sc->kbdc, command_byte);
1076 if (verbose)
e3869ec7 1077 kprintf("psm%d: unknown device type (%d).\n", unit, sc->hw.hwid);
984263bc
MD		 1078 endprobe(ENXIO);
1079 }
1080 switch (sc->hw.hwid) {
1081 case PSM_BALLPOINT_ID:
1082 sc->hw.type = MOUSE_TRACKBALL;
1083 break;
1084 case PSM_MOUSE_ID:
1085 case PSM_INTELLI_ID:
1086 case PSM_EXPLORER_ID:
1087 case PSM_4DMOUSE_ID:
1088 case PSM_4DPLUS_ID:
1089 sc->hw.type = MOUSE_MOUSE;
1090 break;
1091 default:
1092 sc->hw.type = MOUSE_UNKNOWN;
1093 break;
1094 }
1095
1096 if (sc->config & PSM_CONFIG_NOIDPROBE) {
1097 sc->hw.buttons = 2;
1098 i = GENERIC_MOUSE_ENTRY;
1099 } else {
1100 /* # of buttons */
1101 sc->hw.buttons = get_mouse_buttons(sc->kbdc);
1102
1103 /* other parameters */
1104 for (i = 0; vendortype[i].probefunc != NULL; ++i) {
1105 if ((*vendortype[i].probefunc)(sc)) {
1106 if (verbose >= 2)
e3869ec7 1107 kprintf("psm%d: found %s\n",
984263bc
MD		 1108 unit, model_name(vendortype[i].model));
1109 break;
1110 }
1111 }
1112 }
1113
1114 sc->hw.model = vendortype[i].model;
1115
1116 sc->dflt_mode.level = PSM_LEVEL_BASE;
1117 sc->dflt_mode.packetsize = MOUSE_PS2_PACKETSIZE;
1118 sc->dflt_mode.accelfactor = (sc->config & PSM_CONFIG_ACCEL) >> 4;
1119 if (sc->config & PSM_CONFIG_NOCHECKSYNC)
1120 sc->dflt_mode.syncmask[0] = 0;
1121 else
1122 sc->dflt_mode.syncmask[0] = vendortype[i].syncmask;
1123 if (sc->config & PSM_CONFIG_FORCETAP)
1124 sc->mode.syncmask[0] &= ~MOUSE_PS2_TAP;
1125 sc->dflt_mode.syncmask[1] = 0; /* syncbits */
1126 sc->mode = sc->dflt_mode;
1127 sc->mode.packetsize = vendortype[i].packetsize;
1128
1129 /* set mouse parameters */
1130#if 0
1131 /*
1132 * A version of Logitech FirstMouse+ won't report wheel movement,
1133 * if SET_DEFAULTS is sent... Don't use this command.
1134 * This fix was found by Takashi Nishida.
1135 */
1136 i = send_aux_command(sc->kbdc, PSMC_SET_DEFAULTS);
1137 if (verbose >= 2)
e3869ec7 1138 kprintf("psm%d: SET_DEFAULTS return code:%04x\n", unit, i);
984263bc
MD		 1139#endif
1140 if (sc->config & PSM_CONFIG_RESOLUTION) {
1141 sc->mode.resolution
1142 = set_mouse_resolution(sc->kbdc,
1143 (sc->config & PSM_CONFIG_RESOLUTION) - 1);
1144 } else if (sc->mode.resolution >= 0) {
1145 sc->mode.resolution
1146 = set_mouse_resolution(sc->kbdc, sc->dflt_mode.resolution);
1147 }
1148 if (sc->mode.rate > 0) {
1149 sc->mode.rate = set_mouse_sampling_rate(sc->kbdc, sc->dflt_mode.rate);
1150 }
1151 set_mouse_scaling(sc->kbdc, 1);
1152
1153 /* request a data packet and extract sync. bits */
1154 if (get_mouse_status(sc->kbdc, stat, 1, 3) < 3) {
e3869ec7 1155 kprintf("psm%d: failed to get data.\n", unit);
984263bc
MD		 1156 sc->mode.syncmask[0] = 0;
1157 } else {
1158 sc->mode.syncmask[1] = stat[0] & sc->mode.syncmask[0]; /* syncbits */
1159 /* the NetScroll Mouse will send three more bytes... Ignore them */
1160 empty_aux_buffer(sc->kbdc, 5);
1161 }
1162
1163 /* just check the status of the mouse */
1164 /*
1165 * NOTE: XXX there are some arcane controller/mouse combinations out
1166 * there, which hung the controller unless there is data transmission
1167 * after ACK from the mouse.
1168 */
1169 if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3) {
e3869ec7 1170 kprintf("psm%d: failed to get status.\n", unit);
984263bc
MD		 1171 } else {
1172 /*
1173 * When in its native mode, some mice operate with different
1174 * default parameters than in the PS/2 compatible mode.
1175 */
1176 sc->dflt_mode.rate = sc->mode.rate = stat[2];
1177 sc->dflt_mode.resolution = sc->mode.resolution = stat[1];
1178 }
1179
1180 /* disable the aux port for now... */
1181 if (!set_controller_command_byte(sc->kbdc,
1182 KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS,
1183 (command_byte & KBD_KBD_CONTROL_BITS)
1184 | KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1185 /*
1186 * this is CONTROLLER ERROR; I don't know the proper way to
1187 * recover from this error...
1188 */
1189 restore_controller(sc->kbdc, command_byte);
e3869ec7 1190 kprintf("psm%d: unable to set the command byte.\n", unit);
984263bc
MD		 1191 endprobe(ENXIO);
1192 }
1193
1194 /* see if IRQ is available */
1195 rid = 0;
1196 sc->intr = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, irq, irq, 1,
1197 RF_ACTIVE);
1198 if (sc->intr == NULL) {
e3869ec7 1199 kprintf("psm%d: unable to allocate the IRQ resource (%d).\n",
973c11b9 1200 unit, (int)irq);
984263bc
MD		 1201 endprobe(ENXIO);
1202 } else {
1203 bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
1204 }
1205
1206 /* done */
1207 kbdc_set_device_mask(sc->kbdc, mask | KBD_AUX_CONTROL_BITS);
1208 kbdc_lock(sc->kbdc, FALSE);
1209 return (0);
1210}
1211
1212static int
1213psmattach(device_t dev)
1214{
1215 int unit = device_get_unit(dev);
1216 struct psm_softc *sc = device_get_softc(dev);
1217 uintptr_t irq;
1218 int error;
1219 int rid;
1220
1221 if (sc == NULL) /* shouldn't happen */
1222 return (ENXIO);
1223
1224 /* Setup initial state */
1225 sc->state = PSM_VALID;
da8ef4a8 1226 callout_init(&sc->callout);
984263bc
MD		 1227
1228 /* Setup our interrupt handler */
1229 rid = 0;
1230 BUS_READ_IVAR(device_get_parent(dev), dev, KBDC_IVAR_IRQ, &irq);
1231 sc->intr = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, irq, irq, 1,
1232 RF_ACTIVE);
1233 if (sc->intr == NULL)
1234 return (ENXIO);
1235 error = BUS_SETUP_INTR(device_get_parent(dev), dev, sc->intr,
74b1bf1a 1236 INTR_NOPOLL, psmintr, sc, &sc->ih, NULL);
984263bc
MD		 1237 if (error) {
1238 bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
1239 return (error);
1240 }
1241
1242 /* Done */
fef8985e
MD		 1243 make_dev(&psm_ops, PSM_MKMINOR(unit, FALSE), 0, 0, 0666, "psm%d", unit);
1244 make_dev(&psm_ops, PSM_MKMINOR(unit, TRUE), 0, 0, 0666, "bpsm%d", unit);
984263bc
MD		 1245
1246 if (!verbose) {
e3869ec7 1247 kprintf("psm%d: model %s, device ID %d\n",
984263bc
MD		 1248 unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff);
1249 } else {
e3869ec7 1250 kprintf("psm%d: model %s, device ID %d-%02x, %d buttons\n",
984263bc
MD		 1251 unit, model_name(sc->hw.model),
1252 sc->hw.hwid & 0x00ff, sc->hw.hwid >> 8, sc->hw.buttons);
e3869ec7 1253 kprintf("psm%d: config:%08x, flags:%08x, packet size:%d\n",
984263bc 1254 unit, sc->config, sc->flags, sc->mode.packetsize);
e3869ec7 1255 kprintf("psm%d: syncmask:%02x, syncbits:%02x\n",
984263bc
MD		 1256 unit, sc->mode.syncmask[0], sc->mode.syncmask[1]);
1257 }
1258
1259 if (bootverbose)
1260 --verbose;
1261
1262 return (0);
1263}
1264
1265static int
1266psmdetach(device_t dev)
1267{
1268 struct psm_softc *sc;
1269 int rid;
e4c9c0c8 1270 int unit;
984263bc
MD		 1271
1272 sc = device_get_softc(dev);
1273 if (sc->state & PSM_OPEN)
1274 return EBUSY;
1275
e4c9c0c8
MD		 1276 unit = device_get_unit(dev);
1277
984263bc
MD		 1278 rid = 0;
1279 BUS_TEARDOWN_INTR(device_get_parent(dev), dev, sc->intr, sc->ih);
1280 bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
cd29885a
MD		 1281 kprintf("devfs: Please make sure that only the right psm device was removed!!!!\n");
1282 dev_ops_remove_minor(&psm_ops, /*PSM_MKMINOR(-1, 0), */PSM_MKMINOR(unit, 0));
984263bc
MD		 1283
1284 return 0;
1285}
1286
1287static int
fef8985e 1288psmopen(struct dev_open_args *ap)
984263bc 1289{
b13267a5 1290 cdev_t dev = ap->a_head.a_dev;
984263bc
MD		 1291 int unit = PSM_UNIT(dev);
1292 struct psm_softc *sc;
1293 int command_byte;
1294 int err;
984263bc
MD		 1295
1296 /* Get device data */
1297 sc = PSM_SOFTC(unit);
1298 if ((sc == NULL) || (sc->state & PSM_VALID) == 0)
1299 /* the device is no longer valid/functioning */
1300 return (ENXIO);
1301
1302 /* Disallow multiple opens */
1303 if (sc->state & PSM_OPEN)
1304 return (EBUSY);
1305
7e3ac54b 1306#if 0
984263bc 1307 device_busy(devclass_get_device(psm_devclass, unit));
7e3ac54b 1308#endif
984263bc
MD		 1309
1310 /* Initialize state */
1311 sc->rsel.si_flags = 0;
1312 sc->rsel.si_pid = 0;
1313 sc->mode.level = sc->dflt_mode.level;
1314 sc->mode.protocol = sc->dflt_mode.protocol;
1315 sc->watchdog = FALSE;
1316
1317 /* flush the event queue */
1318 sc->queue.count = 0;
1319 sc->queue.head = 0;
1320 sc->queue.tail = 0;
1321 sc->status.flags = 0;
1322 sc->status.button = 0;
1323 sc->status.obutton = 0;
1324 sc->status.dx = 0;
1325 sc->status.dy = 0;
1326 sc->status.dz = 0;
1327 sc->button = 0;
1328
1329 /* empty input buffer */
1330 bzero(sc->ipacket, sizeof(sc->ipacket));
1331 sc->inputbytes = 0;
1332 sc->syncerrors = 0;
1333
1334 /* don't let timeout routines in the keyboard driver to poll the kbdc */
1335 if (!kbdc_lock(sc->kbdc, TRUE))
1336 return (EIO);
1337
1338 /* save the current controller command byte */
a6f9c039 1339 crit_enter();
984263bc
MD		 1340 command_byte = get_controller_command_byte(sc->kbdc);
1341
1342 /* enable the aux port and temporalily disable the keyboard */
1343 if ((command_byte == -1)
1344 || !set_controller_command_byte(sc->kbdc,
1345 kbdc_get_device_mask(sc->kbdc),
1346 KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT
1347 | KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1348 /* CONTROLLER ERROR; do you know how to get out of this? */
1349 kbdc_lock(sc->kbdc, FALSE);
a6f9c039 1350 crit_exit();
984263bc
MD		 1351 log(LOG_ERR, "psm%d: unable to set the command byte (psmopen).\n",
1352 unit);
1353 return (EIO);
1354 }
1355 /*
1356 * Now that the keyboard controller is told not to generate
1357 * the keyboard and mouse interrupts, call `splx()' to allow
1358 * the other tty interrupts. The clock interrupt may also occur,
1359 * but timeout routines will be blocked by the poll flag set
1360 * via `kbdc_lock()'
1361 */
a6f9c039 1362 crit_exit();
984263bc
MD		 1363
1364 /* enable the mouse device */
1365 err = doopen(sc, command_byte);
1366
1367 /* done */
1368 if (err == 0)
1369 sc->state |= PSM_OPEN;
1370 kbdc_lock(sc->kbdc, FALSE);
1371 return (err);
1372}
1373
1374static int
fef8985e 1375psmclose(struct dev_close_args *ap)
984263bc 1376{
b13267a5 1377 cdev_t dev = ap->a_head.a_dev;
984263bc
MD		 1378 int unit = PSM_UNIT(dev);
1379 struct psm_softc *sc = PSM_SOFTC(unit);
1380 int stat[3];
1381 int command_byte;
984263bc
MD		 1382
1383 /* don't let timeout routines in the keyboard driver to poll the kbdc */
1384 if (!kbdc_lock(sc->kbdc, TRUE))
1385 return (EIO);
1386
1387 /* save the current controller command byte */
a6f9c039 1388 crit_enter();
984263bc
MD		 1389 command_byte = get_controller_command_byte(sc->kbdc);
1390 if (command_byte == -1) {
1391 kbdc_lock(sc->kbdc, FALSE);
a6f9c039 1392 crit_exit();
984263bc
MD		 1393 return (EIO);
1394 }
1395
1396 /* disable the aux interrupt and temporalily disable the keyboard */
1397 if (!set_controller_command_byte(sc->kbdc,
1398 kbdc_get_device_mask(sc->kbdc),
1399 KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT
1400 | KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1401 log(LOG_ERR, "psm%d: failed to disable the aux int (psmclose).\n",
1402 unit);
1403 /* CONTROLLER ERROR;
1404 * NOTE: we shall force our way through. Because the only
1405 * ill effect we shall see is that we may not be able
1406 * to read ACK from the mouse, and it doesn't matter much
1407 * so long as the mouse will accept the DISABLE command.
1408 */
1409 }
a6f9c039 1410 crit_exit();
984263bc
MD		 1411
1412 /* stop the watchdog timer */
da8ef4a8 1413 callout_stop(&sc->callout);
984263bc
MD		 1414
1415 /* remove anything left in the output buffer */
1416 empty_aux_buffer(sc->kbdc, 10);
1417
1418 /* disable the aux device, port and interrupt */
1419 if (sc->state & PSM_VALID) {
1420 if (!disable_aux_dev(sc->kbdc)) {
1421 /* MOUSE ERROR;
1422 * NOTE: we don't return error and continue, pretending
1423 * we have successfully disabled the device. It's OK because
1424 * the interrupt routine will discard any data from the mouse
1425 * hereafter.
1426 */
1427 log(LOG_ERR, "psm%d: failed to disable the device (psmclose).\n",
1428 unit);
1429 }
1430
1431 if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
1432 log(LOG_DEBUG, "psm%d: failed to get status (psmclose).\n",
1433 unit);
1434 }
1435
1436 if (!set_controller_command_byte(sc->kbdc,
1437 kbdc_get_device_mask(sc->kbdc),
1438 (command_byte & KBD_KBD_CONTROL_BITS)
1439 | KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1440 /* CONTROLLER ERROR;
1441 * we shall ignore this error; see the above comment.
1442 */
1443 log(LOG_ERR, "psm%d: failed to disable the aux port (psmclose).\n",
1444 unit);
1445 }
1446
1447 /* remove anything left in the output buffer */
1448 empty_aux_buffer(sc->kbdc, 10);
1449
1450 /* close is almost always successful */
1451 sc->state &= ~PSM_OPEN;
1452 kbdc_lock(sc->kbdc, FALSE);
7e3ac54b 1453#if 0
984263bc 1454 device_unbusy(devclass_get_device(psm_devclass, unit));
7e3ac54b 1455#endif
984263bc
MD		 1456 return (0);
1457}
1458
1459static int
1460tame_mouse(struct psm_softc *sc, mousestatus_t *status, unsigned char *buf)
1461{
1462 static unsigned char butmapps2[8] = {
1463 0,
1464 MOUSE_PS2_BUTTON1DOWN,
1465 MOUSE_PS2_BUTTON2DOWN,
1466 MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN,
1467 MOUSE_PS2_BUTTON3DOWN,
1468 MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON3DOWN,
1469 MOUSE_PS2_BUTTON2DOWN | MOUSE_PS2_BUTTON3DOWN,
1470 MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN | MOUSE_PS2_BUTTON3DOWN,
1471 };
1472 static unsigned char butmapmsc[8] = {
1473 MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP,
1474 MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP,
1475 MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON3UP,
1476 MOUSE_MSC_BUTTON3UP,
1477 MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP,
1478 MOUSE_MSC_BUTTON2UP,
1479 MOUSE_MSC_BUTTON1UP,
1480 0,
1481 };
1482 int mapped;
1483 int i;
1484
1485 if (sc->mode.level == PSM_LEVEL_BASE) {
1486 mapped = status->button & ~MOUSE_BUTTON4DOWN;
1487 if (status->button & MOUSE_BUTTON4DOWN)
1488 mapped |= MOUSE_BUTTON1DOWN;
1489 status->button = mapped;
1490 buf[0] = MOUSE_PS2_SYNC | butmapps2[mapped & MOUSE_STDBUTTONS];
1491 i = max(min(status->dx, 255), -256);
1492 if (i < 0)
1493 buf[0] |= MOUSE_PS2_XNEG;
1494 buf[1] = i;
1495 i = max(min(status->dy, 255), -256);
1496 if (i < 0)
1497 buf[0] |= MOUSE_PS2_YNEG;
1498 buf[2] = i;
1499 return MOUSE_PS2_PACKETSIZE;
1500 } else if (sc->mode.level == PSM_LEVEL_STANDARD) {
1501 buf[0] = MOUSE_MSC_SYNC | butmapmsc[status->button & MOUSE_STDBUTTONS];
1502 i = max(min(status->dx, 255), -256);
1503 buf[1] = i >> 1;
1504 buf[3] = i - buf[1];
1505 i = max(min(status->dy, 255), -256);
1506 buf[2] = i >> 1;
1507 buf[4] = i - buf[2];
1508 i = max(min(status->dz, 127), -128);
1509 buf[5] = (i >> 1) & 0x7f;
1510 buf[6] = (i - (i >> 1)) & 0x7f;
1511 buf[7] = (~status->button >> 3) & 0x7f;
1512 return MOUSE_SYS_PACKETSIZE;
1513 }
fc6d0222 1514 return sc->inputbytes;
984263bc
MD		 1515}
1516
1517static int
fef8985e 1518psmread(struct dev_read_args *ap)
984263bc 1519{
b13267a5 1520 cdev_t dev = ap->a_head.a_dev;
fef8985e 1521 struct uio *uio = ap->a_uio;
3a1b0fdc 1522 struct psm_softc *sc = PSM_SOFTC(PSM_UNIT(dev));
984263bc
MD		 1523 unsigned char buf[PSM_SMALLBUFSIZE];
1524 int error = 0;
984263bc
MD		 1525 int l;
1526
1527 if ((sc->state & PSM_VALID) == 0)
1528 return EIO;
1529
1530 /* block until mouse activity occured */
a6f9c039 1531 crit_enter();
984263bc
MD		 1532 while (sc->queue.count <= 0) {
1533 if (PSM_NBLOCKIO(dev)) {
a6f9c039 1534 crit_exit();
984263bc
MD		 1535 return EWOULDBLOCK;
1536 }
1537 sc->state |= PSM_ASLP;
377d4740 1538 error = tsleep((caddr_t) sc, PCATCH, "psmrea", 0);
984263bc
MD		 1539 sc->state &= ~PSM_ASLP;
1540 if (error) {
a6f9c039 1541 crit_exit();
984263bc
MD		 1542 return error;
1543 } else if ((sc->state & PSM_VALID) == 0) {
1544 /* the device disappeared! */
a6f9c039 1545 crit_exit();
984263bc
MD		 1546 return EIO;
1547 }
1548 }
a6f9c039 1549 crit_exit();
984263bc
MD		 1550
1551 /* copy data to the user land */
1552 while ((sc->queue.count > 0) && (uio->uio_resid > 0)) {
a6f9c039 1553 crit_enter();
984263bc
MD		 1554 l = min(sc->queue.count, uio->uio_resid);
1555 if (l > sizeof(buf))
1556 l = sizeof(buf);
1557 if (l > sizeof(sc->queue.buf) - sc->queue.head) {
1558 bcopy(&sc->queue.buf[sc->queue.head], &buf[0],
1559 sizeof(sc->queue.buf) - sc->queue.head);
1560 bcopy(&sc->queue.buf[0],
1561 &buf[sizeof(sc->queue.buf) - sc->queue.head],
1562 l - (sizeof(sc->queue.buf) - sc->queue.head));
1563 } else {
1564 bcopy(&sc->queue.buf[sc->queue.head], &buf[0], l);
1565 }
1566 sc->queue.count -= l;
1567 sc->queue.head = (sc->queue.head + l) % sizeof(sc->queue.buf);
a6f9c039 1568 crit_exit();
984263bc
MD		 1569 error = uiomove(buf, l, uio);
1570 if (error)
1571 break;
1572 }
1573
1574 return error;
1575}
1576
1577static int
1578block_mouse_data(struct psm_softc *sc, int *c)
1579{
984263bc
MD		 1580 if (!kbdc_lock(sc->kbdc, TRUE))
1581 return EIO;
1582
a6f9c039 1583 crit_enter();
984263bc
MD		 1584 *c = get_controller_command_byte(sc->kbdc);
1585 if ((*c == -1)
1586 || !set_controller_command_byte(sc->kbdc,
1587 kbdc_get_device_mask(sc->kbdc),
1588 KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT
1589 | KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1590 /* this is CONTROLLER ERROR */
a6f9c039 1591 crit_exit();
984263bc
MD		 1592 kbdc_lock(sc->kbdc, FALSE);
1593 return EIO;
1594 }
1595
1596 /*
1597 * The device may be in the middle of status data transmission.
1598 * The transmission will be interrupted, thus, incomplete status
1599 * data must be discarded. Although the aux interrupt is disabled
1600 * at the keyboard controller level, at most one aux interrupt
1601 * may have already been pending and a data byte is in the
1602 * output buffer; throw it away. Note that the second argument
1603 * to `empty_aux_buffer()' is zero, so that the call will just
1604 * flush the internal queue.
1605 * `psmintr()' will be invoked after `splx()' if an interrupt is
1606 * pending; it will see no data and returns immediately.
1607 */
1608 empty_aux_buffer(sc->kbdc, 0); /* flush the queue */
1609 read_aux_data_no_wait(sc->kbdc); /* throw away data if any */
1610 sc->inputbytes = 0;
a6f9c039 1611 crit_exit();
984263bc
MD		 1612
1613 return 0;
1614}
1615
1616static int
1617unblock_mouse_data(struct psm_softc *sc, int c)
1618{
1619 int error = 0;
1620
1621 /*
1622 * We may have seen a part of status data during `set_mouse_XXX()'.
1623 * they have been queued; flush it.
1624 */
1625 empty_aux_buffer(sc->kbdc, 0);
1626
1627 /* restore ports and interrupt */
1628 if (!set_controller_command_byte(sc->kbdc,
1629 kbdc_get_device_mask(sc->kbdc),
1630 c & (KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS))) {
1631 /* CONTROLLER ERROR; this is serious, we may have
1632 * been left with the inaccessible keyboard and
1633 * the disabled mouse interrupt.
1634 */
1635 error = EIO;
1636 }
1637
1638 kbdc_lock(sc->kbdc, FALSE);
1639 return error;
1640}
1641
1642static int
fef8985e 1643psmioctl(struct dev_ioctl_args *ap)
984263bc 1644{
b13267a5 1645 cdev_t dev = ap->a_head.a_dev;
fef8985e 1646 caddr_t addr= ap->a_data;
984263bc
MD		 1647 struct psm_softc *sc = PSM_SOFTC(PSM_UNIT(dev));
1648 mousemode_t mode;
1649 mousestatus_t status;
1650#if (defined(MOUSE_GETVARS))
1651 mousevar_t *var;
1652#endif
1653 mousedata_t *data;
1654 int stat[3];
1655 int command_byte;
1656 int error = 0;
984263bc
MD		 1657
1658 /* Perform IOCTL command */
984263bc 1659
fef8985e 1660 switch (ap->a_cmd) {
984263bc 1661 case OLD_MOUSE_GETHWINFO:
a6f9c039 1662 crit_enter();
984263bc
MD		 1663 ((old_mousehw_t *)addr)->buttons = sc->hw.buttons;
1664 ((old_mousehw_t *)addr)->iftype = sc->hw.iftype;
1665 ((old_mousehw_t *)addr)->type = sc->hw.type;
1666 ((old_mousehw_t *)addr)->hwid = sc->hw.hwid & 0x00ff;
a6f9c039 1667 crit_exit();
984263bc
MD		 1668 break;
1669
1670 case MOUSE_GETHWINFO:
a6f9c039 1671 crit_enter();
984263bc
MD		 1672 *(mousehw_t *)addr = sc->hw;
1673 if (sc->mode.level == PSM_LEVEL_BASE)
1674 ((mousehw_t *)addr)->model = MOUSE_MODEL_GENERIC;
a6f9c039 1675 crit_exit();
984263bc
MD		 1676 break;
1677
1678 case OLD_MOUSE_GETMODE:
a6f9c039 1679 crit_enter();
984263bc
MD		 1680 switch (sc->mode.level) {
1681 case PSM_LEVEL_BASE:
1682 ((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
1683 break;
1684 case PSM_LEVEL_STANDARD:
1685 ((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_SYSMOUSE;
1686 break;
1687 case PSM_LEVEL_NATIVE:
1688 ((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
1689 break;
1690 }
1691 ((old_mousemode_t *)addr)->rate = sc->mode.rate;
1692 ((old_mousemode_t *)addr)->resolution = sc->mode.resolution;
1693 ((old_mousemode_t *)addr)->accelfactor = sc->mode.accelfactor;
a6f9c039 1694 crit_exit();
984263bc
MD		 1695 break;
1696
1697 case MOUSE_GETMODE:
a6f9c039 1698 crit_enter();
984263bc
MD		 1699 *(mousemode_t *)addr = sc->mode;
1700 ((mousemode_t *)addr)->resolution =
1701 MOUSE_RES_LOW - sc->mode.resolution;
1702 switch (sc->mode.level) {
1703 case PSM_LEVEL_BASE:
1704 ((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
1705 ((mousemode_t *)addr)->packetsize = MOUSE_PS2_PACKETSIZE;
1706 break;
1707 case PSM_LEVEL_STANDARD:
1708 ((mousemode_t *)addr)->protocol = MOUSE_PROTO_SYSMOUSE;
1709 ((mousemode_t *)addr)->packetsize = MOUSE_SYS_PACKETSIZE;
1710 ((mousemode_t *)addr)->syncmask[0] = MOUSE_SYS_SYNCMASK;
1711 ((mousemode_t *)addr)->syncmask[1] = MOUSE_SYS_SYNC;
1712 break;
1713 case PSM_LEVEL_NATIVE:
1714 /* FIXME: this isn't quite correct... XXX */
1715 ((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
1716 break;
1717 }
a6f9c039 1718 crit_exit();
984263bc
MD		 1719 break;
1720
1721 case OLD_MOUSE_SETMODE:
1722 case MOUSE_SETMODE:
fef8985e 1723 if (ap->a_cmd == OLD_MOUSE_SETMODE) {
984263bc
MD		 1724 mode.rate = ((old_mousemode_t *)addr)->rate;
1725 /*
1726 * resolution old I/F new I/F
1727 * default 0 0
1728 * low 1 -2
1729 * medium low 2 -3
1730 * medium high 3 -4
1731 * high 4 -5
1732 */
1733 if (((old_mousemode_t *)addr)->resolution > 0)
1734 mode.resolution = -((old_mousemode_t *)addr)->resolution - 1;
1735 mode.accelfactor = ((old_mousemode_t *)addr)->accelfactor;
1736 mode.level = -1;
1737 } else {
1738 mode = *(mousemode_t *)addr;
1739 }
1740
1741 /* adjust and validate parameters. */
1742 if (mode.rate > UCHAR_MAX)
1743 return EINVAL;
1744 if (mode.rate == 0)
1745 mode.rate = sc->dflt_mode.rate;
1746 else if (mode.rate == -1)
1747 /* don't change the current setting */
1748 ;
1749 else if (mode.rate < 0)
1750 return EINVAL;
1751 if (mode.resolution >= UCHAR_MAX)
1752 return EINVAL;
1753 if (mode.resolution >= 200)
1754 mode.resolution = MOUSE_RES_HIGH;
1755 else if (mode.resolution >= 100)
1756 mode.resolution = MOUSE_RES_MEDIUMHIGH;
1757 else if (mode.resolution >= 50)
1758 mode.resolution = MOUSE_RES_MEDIUMLOW;
1759 else if (mode.resolution > 0)
1760 mode.resolution = MOUSE_RES_LOW;
1761 if (mode.resolution == MOUSE_RES_DEFAULT)
1762 mode.resolution = sc->dflt_mode.resolution;
1763 else if (mode.resolution == -1)
1764 /* don't change the current setting */
1765 ;
1766 else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */
1767 mode.resolution = MOUSE_RES_LOW - mode.resolution;
1768 if (mode.level == -1)
1769 /* don't change the current setting */
1770 mode.level = sc->mode.level;
1771 else if ((mode.level < PSM_LEVEL_MIN) || (mode.level > PSM_LEVEL_MAX))
1772 return EINVAL;
1773 if (mode.accelfactor == -1)
1774 /* don't change the current setting */
1775 mode.accelfactor = sc->mode.accelfactor;
1776 else if (mode.accelfactor < 0)
1777 return EINVAL;
1778
1779 /* don't allow anybody to poll the keyboard controller */
1780 error = block_mouse_data(sc, &command_byte);
1781 if (error)
1782 return error;
1783
1784 /* set mouse parameters */
1785 if (mode.rate > 0)
1786 mode.rate = set_mouse_sampling_rate(sc->kbdc, mode.rate);
1787 if (mode.resolution >= 0)
1788 mode.resolution = set_mouse_resolution(sc->kbdc, mode.resolution);
1789 set_mouse_scaling(sc->kbdc, 1);
1790 get_mouse_status(sc->kbdc, stat, 0, 3);
1791
a6f9c039 1792 crit_enter();
984263bc
MD		 1793 sc->mode.rate = mode.rate;
1794 sc->mode.resolution = mode.resolution;
1795 sc->mode.accelfactor = mode.accelfactor;
1796 sc->mode.level = mode.level;
a6f9c039 1797 crit_exit();
984263bc
MD		 1798
1799 unblock_mouse_data(sc, command_byte);
1800 break;
1801
1802 case MOUSE_GETLEVEL:
1803 *(int *)addr = sc->mode.level;
1804 break;
1805
1806 case MOUSE_SETLEVEL:
1807 if ((*(int *)addr < PSM_LEVEL_MIN) || (*(int *)addr > PSM_LEVEL_MAX))
1808 return EINVAL;
1809 sc->mode.level = *(int *)addr;
1810 break;
1811
1812 case MOUSE_GETSTATUS:
a6f9c039 1813 crit_enter();
984263bc
MD		 1814 status = sc->status;
1815 sc->status.flags = 0;
1816 sc->status.obutton = sc->status.button;
1817 sc->status.button = 0;
1818 sc->status.dx = 0;
1819 sc->status.dy = 0;
1820 sc->status.dz = 0;
a6f9c039 1821 crit_exit();
984263bc
MD		 1822 *(mousestatus_t *)addr = status;
1823 break;
1824
1825#if (defined(MOUSE_GETVARS))
1826 case MOUSE_GETVARS:
1827 var = (mousevar_t *)addr;
1828 bzero(var, sizeof(*var));
a6f9c039 1829 crit_enter();
984263bc
MD		 1830 var->var[0] = MOUSE_VARS_PS2_SIG;
1831 var->var[1] = sc->config;
1832 var->var[2] = sc->flags;
a6f9c039 1833 crit_exit();
984263bc
MD		 1834 break;
1835
1836 case MOUSE_SETVARS:
1837 return ENODEV;
1838#endif /* MOUSE_GETVARS */
1839
1840 case MOUSE_READSTATE:
1841 case MOUSE_READDATA:
1842 data = (mousedata_t *)addr;
1843 if (data->len > sizeof(data->buf)/sizeof(data->buf[0]))
1844 return EINVAL;
1845
1846 error = block_mouse_data(sc, &command_byte);
1847 if (error)
1848 return error;
1849 if ((data->len = get_mouse_status(sc->kbdc, data->buf,
fef8985e 1850 (ap->a_cmd == MOUSE_READDATA) ? 1 : 0, data->len)) <= 0)
984263bc
MD		 1851 error = EIO;
1852 unblock_mouse_data(sc, command_byte);
1853 break;
1854
1855#if (defined(MOUSE_SETRESOLUTION))
1856 case MOUSE_SETRESOLUTION:
1857 mode.resolution = *(int *)addr;
1858 if (mode.resolution >= UCHAR_MAX)
1859 return EINVAL;
1860 else if (mode.resolution >= 200)
1861 mode.resolution = MOUSE_RES_HIGH;
1862 else if (mode.resolution >= 100)
1863 mode.resolution = MOUSE_RES_MEDIUMHIGH;
1864 else if (mode.resolution >= 50)
1865 mode.resolution = MOUSE_RES_MEDIUMLOW;
1866 else if (mode.resolution > 0)
1867 mode.resolution = MOUSE_RES_LOW;
1868 if (mode.resolution == MOUSE_RES_DEFAULT)
1869 mode.resolution = sc->dflt_mode.resolution;
1870 else if (mode.resolution == -1)
1871 mode.resolution = sc->mode.resolution;
1872 else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */
1873 mode.resolution = MOUSE_RES_LOW - mode.resolution;
1874
1875 error = block_mouse_data(sc, &command_byte);
1876 if (error)
1877 return error;
1878 sc->mode.resolution = set_mouse_resolution(sc->kbdc, mode.resolution);
1879 if (sc->mode.resolution != mode.resolution)
1880 error = EIO;
1881 unblock_mouse_data(sc, command_byte);
1882 break;
1883#endif /* MOUSE_SETRESOLUTION */
1884
1885#if (defined(MOUSE_SETRATE))
1886 case MOUSE_SETRATE:
1887 mode.rate = *(int *)addr;
1888 if (mode.rate > UCHAR_MAX)
1889 return EINVAL;
1890 if (mode.rate == 0)
1891 mode.rate = sc->dflt_mode.rate;
1892 else if (mode.rate < 0)
1893 mode.rate = sc->mode.rate;
1894
1895 error = block_mouse_data(sc, &command_byte);
1896 if (error)
1897 return error;
1898 sc->mode.rate = set_mouse_sampling_rate(sc->kbdc, mode.rate);
1899 if (sc->mode.rate != mode.rate)
1900 error = EIO;
1901 unblock_mouse_data(sc, command_byte);
1902 break;
1903#endif /* MOUSE_SETRATE */
1904
1905#if (defined(MOUSE_SETSCALING))
1906 case MOUSE_SETSCALING:
1907 if ((*(int *)addr <= 0) || (*(int *)addr > 2))
1908 return EINVAL;
1909
1910 error = block_mouse_data(sc, &command_byte);
1911 if (error)
1912 return error;
1913 if (!set_mouse_scaling(sc->kbdc, *(int *)addr))
1914 error = EIO;
1915 unblock_mouse_data(sc, command_byte);
1916 break;
1917#endif /* MOUSE_SETSCALING */
1918
1919#if (defined(MOUSE_GETHWID))
1920 case MOUSE_GETHWID:
1921 error = block_mouse_data(sc, &command_byte);
1922 if (error)
1923 return error;
1924 sc->hw.hwid &= ~0x00ff;
1925 sc->hw.hwid |= get_aux_id(sc->kbdc);
1926 *(int *)addr = sc->hw.hwid & 0x00ff;
1927 unblock_mouse_data(sc, command_byte);
1928 break;
1929#endif /* MOUSE_GETHWID */
1930
1931 default:
1932 return ENOTTY;
1933 }
1934
1935 return error;
1936}
1937
1938static void
1939psmtimeout(void *arg)
1940{
1941 struct psm_softc *sc;
984263bc
MD		 1942
1943 sc = (struct psm_softc *)arg;
a6f9c039 1944 crit_enter();
984263bc
MD		 1945 if (sc->watchdog && kbdc_lock(sc->kbdc, TRUE)) {
1946 if (verbose >= 4)
1947 log(LOG_DEBUG, "psm%d: lost interrupt?\n", sc->unit);
1948 psmintr(sc);
1949 kbdc_lock(sc->kbdc, FALSE);
1950 }
1951 sc->watchdog = TRUE;
da8ef4a8 1952 callout_reset(&sc->callout, hz, psmtimeout, (void *)(uintptr_t)sc);
a6f9c039 1953 crit_exit();
984263bc
MD		 1954}
1955
1956static void
1957psmintr(void *arg)
1958{
1959 /*
1960 * the table to turn PS/2 mouse button bits (MOUSE_PS2_BUTTON?DOWN)
1961 * into `mousestatus' button bits (MOUSE_BUTTON?DOWN).
1962 */
1963 static int butmap[8] = {
1964 0,
1965 MOUSE_BUTTON1DOWN,
1966 MOUSE_BUTTON3DOWN,
1967 MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
1968 MOUSE_BUTTON2DOWN,
1969 MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN,
1970 MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN,
1971 MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN
1972 };
1973 static int butmap_versapad[8] = {
1974 0,
1975 MOUSE_BUTTON3DOWN,
1976 0,
1977 MOUSE_BUTTON3DOWN,
1978 MOUSE_BUTTON1DOWN,
1979 MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
1980 MOUSE_BUTTON1DOWN,
1981 MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN
1982 };
3a1b0fdc 1983 struct psm_softc *sc = arg;
984263bc
MD		 1984 mousestatus_t ms;
1985 struct timeval tv;
1986 int x, y, z;
1987 int c;
1988 int l;
1989 int x0, y0;
1990
1991 /* read until there is nothing to read */
1992 while((c = read_aux_data_no_wait(sc->kbdc)) != -1) {
1993
1994 /* discard the byte if the device is not open */
1995 if ((sc->state & PSM_OPEN) == 0)
1996 continue;
1997
1998 getmicrouptime(&tv);
1999 if ((sc->inputbytes > 0) && timevalcmp(&tv, &sc->inputtimeout, >)) {
2000 log(LOG_DEBUG, "psmintr: delay too long; resetting byte count\n");
2001 sc->inputbytes = 0;
2002 sc->syncerrors = 0;
2003 }
2004 sc->inputtimeout.tv_sec = PSM_INPUT_TIMEOUT/1000000;
2005 sc->inputtimeout.tv_usec = PSM_INPUT_TIMEOUT%1000000;
2006 timevaladd(&sc->inputtimeout, &tv);
2007
2008 sc->ipacket[sc->inputbytes++] = c;
2009 if (sc->inputbytes < sc->mode.packetsize)
2010 continue;
2011
2012#if 0
2013 log(LOG_DEBUG, "psmintr: %02x %02x %02x %02x %02x %02x\n",
2014 sc->ipacket[0], sc->ipacket[1], sc->ipacket[2],
2015 sc->ipacket[3], sc->ipacket[4], sc->ipacket[5]);
2016#endif
2017
2018 c = sc->ipacket[0];
2019
2020 if ((c & sc->mode.syncmask[0]) != sc->mode.syncmask[1]) {
2021 log(LOG_DEBUG, "psmintr: out of sync (%04x != %04x).\n",
2022 c & sc->mode.syncmask[0], sc->mode.syncmask[1]);
2023 ++sc->syncerrors;
2024 if (sc->syncerrors < sc->mode.packetsize) {
2025 log(LOG_DEBUG, "psmintr: discard a byte (%d).\n", sc->syncerrors);
2026 --sc->inputbytes;
2027 bcopy(&sc->ipacket[1], &sc->ipacket[0], sc->inputbytes);
2028 } else if (sc->syncerrors == sc->mode.packetsize) {
2029 log(LOG_DEBUG, "psmintr: re-enable the mouse.\n");
2030 sc->inputbytes = 0;
2031 disable_aux_dev(sc->kbdc);
2032 enable_aux_dev(sc->kbdc);
2033 } else if (sc->syncerrors < PSM_SYNCERR_THRESHOLD1) {
2034 log(LOG_DEBUG, "psmintr: discard a byte (%d).\n", sc->syncerrors);
2035 --sc->inputbytes;
2036 bcopy(&sc->ipacket[1], &sc->ipacket[0], sc->inputbytes);
2037 } else if (sc->syncerrors >= PSM_SYNCERR_THRESHOLD1) {
2038 log(LOG_DEBUG, "psmintr: reset the mouse.\n");
2039 reinitialize(sc, TRUE);
2040 }
2041 continue;
2042 }
2043
2044 /*
2045 * A kludge for Kensington device!
2046 * The MSB of the horizontal count appears to be stored in
2047 * a strange place.
2048 */
2049 if (sc->hw.model == MOUSE_MODEL_THINK)
2050 sc->ipacket[1] |= (c & MOUSE_PS2_XOVERFLOW) ? 0x80 : 0;
2051
2052 /* ignore the overflow bits... */
2053 x = (c & MOUSE_PS2_XNEG) ? sc->ipacket[1] - 256 : sc->ipacket[1];
2054 y = (c & MOUSE_PS2_YNEG) ? sc->ipacket[2] - 256 : sc->ipacket[2];
2055 z = 0;
2056 ms.obutton = sc->button; /* previous button state */
2057 ms.button = butmap[c & MOUSE_PS2_BUTTONS];
2058 /* `tapping' action */
2059 if (sc->config & PSM_CONFIG_FORCETAP)
2060 ms.button |= ((c & MOUSE_PS2_TAP)) ? 0 : MOUSE_BUTTON4DOWN;
2061
2062 switch (sc->hw.model) {
2063
2064 case MOUSE_MODEL_EXPLORER:
2065 /*
2066 * b7 b6 b5 b4 b3 b2 b1 b0
2067 * byte 1: oy ox sy sx 1 M R L
2068 * byte 2: x x x x x x x x
2069 * byte 3: y y y y y y y y
2070 * byte 4: * * S2 S1 s d2 d1 d0
2071 *
2072 * L, M, R, S1, S2: left, middle, right and side buttons
2073 * s: wheel data sign bit
2074 * d2-d0: wheel data
2075 */
2076 z = (sc->ipacket[3] & MOUSE_EXPLORER_ZNEG)
2077 ? (sc->ipacket[3] & 0x0f) - 16 : (sc->ipacket[3] & 0x0f);
2078 ms.button |= (sc->ipacket[3] & MOUSE_EXPLORER_BUTTON4DOWN)
2079 ? MOUSE_BUTTON4DOWN : 0;
2080 ms.button |= (sc->ipacket[3] & MOUSE_EXPLORER_BUTTON5DOWN)
2081 ? MOUSE_BUTTON5DOWN : 0;
2082 break;
2083
2084 case MOUSE_MODEL_INTELLI:
2085 case MOUSE_MODEL_NET:
2086 /* wheel data is in the fourth byte */
2087 z = (char)sc->ipacket[3];
2088 /* some mice may send 7 when there is no Z movement?! XXX */
2089 if ((z >= 7) || (z <= -7))
2090 z = 0;
2091 /* some compatible mice have additional buttons */
2092 ms.button |= (c & MOUSE_PS2INTELLI_BUTTON4DOWN)
2093 ? MOUSE_BUTTON4DOWN : 0;
2094 ms.button |= (c & MOUSE_PS2INTELLI_BUTTON5DOWN)
2095 ? MOUSE_BUTTON5DOWN : 0;
2096 break;
2097
2098 case MOUSE_MODEL_MOUSEMANPLUS:
2099 /*
2100 * PS2++ protocl packet
2101 *
2102 * b7 b6 b5 b4 b3 b2 b1 b0
2103 * byte 1: * 1 p3 p2 1 * * *
2104 * byte 2: c1 c2 p1 p0 d1 d0 1 0
2105 *
2106 * p3-p0: packet type
2107 * c1, c2: c1 & c2 == 1, if p2 == 0
2108 * c1 & c2 == 0, if p2 == 1
2109 *
2110 * packet type: 0 (device type)
2111 * See comments in enable_mmanplus() below.
2112 *
2113 * packet type: 1 (wheel data)
2114 *
2115 * b7 b6 b5 b4 b3 b2 b1 b0
2116 * byte 3: h * B5 B4 s d2 d1 d0
2117 *
2118 * h: 1, if horizontal roller data
2119 * 0, if vertical roller data
2120 * B4, B5: button 4 and 5
2121 * s: sign bit
2122 * d2-d0: roller data
2123 *
2124 * packet type: 2 (reserved)
2125 */
2126 if (((c & MOUSE_PS2PLUS_SYNCMASK) == MOUSE_PS2PLUS_SYNC)
2127 && (abs(x) > 191)
2128 && MOUSE_PS2PLUS_CHECKBITS(sc->ipacket)) {
2129 /* the extended data packet encodes button and wheel events */
2130 switch (MOUSE_PS2PLUS_PACKET_TYPE(sc->ipacket)) {
2131 case 1:
2132 /* wheel data packet */
2133 x = y = 0;
2134 if (sc->ipacket[2] & 0x80) {
2135 /* horizontal roller count - ignore it XXX*/
2136 } else {
2137 /* vertical roller count */
2138 z = (sc->ipacket[2] & MOUSE_PS2PLUS_ZNEG)
2139 ? (sc->ipacket[2] & 0x0f) - 16
2140 : (sc->ipacket[2] & 0x0f);
2141 }
2142 ms.button |= (sc->ipacket[2] & MOUSE_PS2PLUS_BUTTON4DOWN)
2143 ? MOUSE_BUTTON4DOWN : 0;
2144 ms.button |= (sc->ipacket[2] & MOUSE_PS2PLUS_BUTTON5DOWN)
2145 ? MOUSE_BUTTON5DOWN : 0;
2146 break;
2147 case 2:
2148 /* this packet type is reserved by Logitech... */
2149 /*
2150 * IBM ScrollPoint Mouse uses this packet type to
2151 * encode both vertical and horizontal scroll movement.
2152 */
2153 x = y = 0;
2154 /* horizontal count */
2155 if (sc->ipacket[2] & 0x0f)
2156 z = (sc->ipacket[2] & MOUSE_SPOINT_WNEG) ? -2 : 2;
2157 /* vertical count */
2158 if (sc->ipacket[2] & 0xf0)
2159 z = (sc->ipacket[2] & MOUSE_SPOINT_ZNEG) ? -1 : 1;
2160#if 0
2161 /* vertical count */
2162 z = (sc->ipacket[2] & MOUSE_SPOINT_ZNEG)
2163 ? ((sc->ipacket[2] >> 4) & 0x0f) - 16
2164 : ((sc->ipacket[2] >> 4) & 0x0f);
2165 /* horizontal count */
2166 w = (sc->ipacket[2] & MOUSE_SPOINT_WNEG)
2167 ? (sc->ipacket[2] & 0x0f) - 16
2168 : (sc->ipacket[2] & 0x0f);
2169#endif
2170 break;
2171 case 0:
2172 /* device type packet - shouldn't happen */
2173 /* FALL THROUGH */
2174 default:
2175 x = y = 0;
2176 ms.button = ms.obutton;
2177 if (bootverbose)
2178 log(LOG_DEBUG, "psmintr: unknown PS2++ packet type %d: "
2179 "0x%02x 0x%02x 0x%02x\n",
2180 MOUSE_PS2PLUS_PACKET_TYPE(sc->ipacket),
2181 sc->ipacket[0], sc->ipacket[1], sc->ipacket[2]);
2182 break;
2183 }
2184 } else {
2185 /* preserve button states */
2186 ms.button |= ms.obutton & MOUSE_EXTBUTTONS;
2187 }
2188 break;
2189
2190 case MOUSE_MODEL_GLIDEPOINT:
2191 /* `tapping' action */
2192 ms.button |= ((c & MOUSE_PS2_TAP)) ? 0 : MOUSE_BUTTON4DOWN;
2193 break;
2194
2195 case MOUSE_MODEL_NETSCROLL:
2196 /* three addtional bytes encode buttons and wheel events */
2197 ms.button |= (sc->ipacket[3] & MOUSE_PS2_BUTTON3DOWN)
2198 ? MOUSE_BUTTON4DOWN : 0;
2199 ms.button |= (sc->ipacket[3] & MOUSE_PS2_BUTTON1DOWN)
2200 ? MOUSE_BUTTON5DOWN : 0;
2201 z = (sc->ipacket[3] & MOUSE_PS2_XNEG)
2202 ? sc->ipacket[4] - 256 : sc->ipacket[4];
2203 break;
2204
2205 case MOUSE_MODEL_THINK:
2206 /* the fourth button state in the first byte */
2207 ms.button |= (c & MOUSE_PS2_TAP) ? MOUSE_BUTTON4DOWN : 0;
2208 break;
2209
2210 case MOUSE_MODEL_VERSAPAD:
2211 /* VersaPad PS/2 absolute mode message format
2212 *
2213 * [packet1] 7 6 5 4 3 2 1 0(LSB)
2214 * ipacket[0]: 1 1 0 A 1 L T R
2215 * ipacket[1]: H7 H6 H5 H4 H3 H2 H1 H0
2216 * ipacket[2]: V7 V6 V5 V4 V3 V2 V1 V0
2217 * ipacket[3]: 1 1 1 A 1 L T R
2218 * ipacket[4]:V11 V10 V9 V8 H11 H10 H9 H8
2219 * ipacket[5]: 0 P6 P5 P4 P3 P2 P1 P0
2220 *
2221 * [note]
2222 * R: right physical mouse button (1=on)
2223 * T: touch pad virtual button (1=tapping)
2224 * L: left physical mouse button (1=on)
2225 * A: position data is valid (1=valid)
2226 * H: horizontal data (12bit signed integer. H11 is sign bit.)
2227 * V: vertical data (12bit signed integer. V11 is sign bit.)
2228 * P: pressure data
2229 *
2230 * Tapping is mapped to MOUSE_BUTTON4.
2231 */
2232 ms.button = butmap_versapad[c & MOUSE_PS2VERSA_BUTTONS];
2233 ms.button |= (c & MOUSE_PS2VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0;
2234 x = y = 0;
2235 if (c & MOUSE_PS2VERSA_IN_USE) {
2236 x0 = sc->ipacket[1] | (((sc->ipacket[4]) & 0x0f) << 8);
2237 y0 = sc->ipacket[2] | (((sc->ipacket[4]) & 0xf0) << 4);
2238 if (x0 & 0x800)
2239 x0 -= 0x1000;
2240 if (y0 & 0x800)
2241 y0 -= 0x1000;
2242 if (sc->flags & PSM_FLAGS_FINGERDOWN) {
2243 x = sc->xold - x0;
2244 y = y0 - sc->yold;
2245 if (x < 0) /* XXX */
2246 x++;
2247 else if (x)
2248 x--;
2249 if (y < 0)
2250 y++;
2251 else if (y)
2252 y--;
2253 } else {
2254 sc->flags |= PSM_FLAGS_FINGERDOWN;
2255 }
2256 sc->xold = x0;
2257 sc->yold = y0;
2258 } else {
2259 sc->flags &= ~PSM_FLAGS_FINGERDOWN;
2260 }
2261 c = ((x < 0) ? MOUSE_PS2_XNEG : 0)
2262 | ((y < 0) ? MOUSE_PS2_YNEG : 0);
2263 break;
2264
2265 case MOUSE_MODEL_4D:
2266 /*
2267 * b7 b6 b5 b4 b3 b2 b1 b0
2268 * byte 1: s2 d2 s1 d1 1 M R L
2269 * byte 2: sx x x x x x x x
2270 * byte 3: sy y y y y y y y
2271 *
2272 * s1: wheel 1 direction
2273 * d1: wheel 1 data
2274 * s2: wheel 2 direction
2275 * d2: wheel 2 data
2276 */
2277 x = (sc->ipacket[1] & 0x80) ? sc->ipacket[1] - 256 : sc->ipacket[1];
2278 y = (sc->ipacket[2] & 0x80) ? sc->ipacket[2] - 256 : sc->ipacket[2];
2279 switch (c & MOUSE_4D_WHEELBITS) {
2280 case 0x10:
2281 z = 1;
2282 break;
2283 case 0x30:
2284 z = -1;
2285 break;
2286 case 0x40: /* 2nd wheel turning right XXX */
2287 z = 2;
2288 break;
2289 case 0xc0: /* 2nd wheel turning left XXX */
2290 z = -2;
2291 break;
2292 }
2293 break;
2294
2295 case MOUSE_MODEL_4DPLUS:
2296 if ((x < 16 - 256) && (y < 16 - 256)) {
2297 /*
2298 * b7 b6 b5 b4 b3 b2 b1 b0
2299 * byte 1: 0 0 1 1 1 M R L
2300 * byte 2: 0 0 0 0 1 0 0 0
2301 * byte 3: 0 0 0 0 S s d1 d0
2302 *
2303 * L, M, R, S: left, middle, right and side buttons
2304 * s: wheel data sign bit
2305 * d1-d0: wheel data
2306 */
2307 x = y = 0;
2308 if (sc->ipacket[2] & MOUSE_4DPLUS_BUTTON4DOWN)
2309 ms.button |= MOUSE_BUTTON4DOWN;
2310 z = (sc->ipacket[2] & MOUSE_4DPLUS_ZNEG)
2311 ? ((sc->ipacket[2] & 0x07) - 8)
2312 : (sc->ipacket[2] & 0x07) ;
2313 } else {
2314 /* preserve previous button states */
2315 ms.button |= ms.obutton & MOUSE_EXTBUTTONS;
2316 }
2317 break;
2318
2319 case MOUSE_MODEL_GENERIC:
2320 default:
2321 break;
2322 }
2323
2324 /* scale values */
2325 if (sc->mode.accelfactor >= 1) {
2326 if (x != 0) {
2327 x = x * x / sc->mode.accelfactor;
2328 if (x == 0)
2329 x = 1;
2330 if (c & MOUSE_PS2_XNEG)
2331 x = -x;
2332 }
2333 if (y != 0) {
2334 y = y * y / sc->mode.accelfactor;
2335 if (y == 0)
2336 y = 1;
2337 if (c & MOUSE_PS2_YNEG)
2338 y = -y;
2339 }
2340 }
2341
2342 ms.dx = x;
2343 ms.dy = y;
2344 ms.dz = z;
2345 ms.flags = ((x || y || z) ? MOUSE_POSCHANGED : 0)
2346 | (ms.obutton ^ ms.button);
2347
2348 if (sc->mode.level < PSM_LEVEL_NATIVE)
2349 sc->inputbytes = tame_mouse(sc, &ms, sc->ipacket);
2350
2351 sc->status.flags |= ms.flags;
2352 sc->status.dx += ms.dx;
2353 sc->status.dy += ms.dy;
2354 sc->status.dz += ms.dz;
2355 sc->status.button = ms.button;
2356 sc->button = ms.button;
2357
2358 sc->watchdog = FALSE;
2359
2360 /* queue data */
2361 if (sc->queue.count + sc->inputbytes < sizeof(sc->queue.buf)) {
2362 l = min(sc->inputbytes, sizeof(sc->queue.buf) - sc->queue.tail);
2363 bcopy(&sc->ipacket[0], &sc->queue.buf[sc->queue.tail], l);
2364 if (sc->inputbytes > l)
2365 bcopy(&sc->ipacket[l], &sc->queue.buf[0], sc->inputbytes - l);
2366 sc->queue.tail =
2367 (sc->queue.tail + sc->inputbytes) % sizeof(sc->queue.buf);
2368 sc->queue.count += sc->inputbytes;
2369 }
2370 sc->inputbytes = 0;
2371
2372 if (sc->state & PSM_ASLP) {
2373 sc->state &= ~PSM_ASLP;
2374 wakeup((caddr_t) sc);
2375 }
2376 selwakeup(&sc->rsel);
2377 }
2378}
2379
2380static int
fef8985e 2381psmpoll(struct dev_poll_args *ap)
984263bc 2382{
b13267a5 2383 cdev_t dev = ap->a_head.a_dev;
984263bc 2384 struct psm_softc *sc = PSM_SOFTC(PSM_UNIT(dev));
984263bc
MD		 2385 int revents = 0;
2386
2387 /* Return true if a mouse event available */
a6f9c039 2388 crit_enter();
fef8985e 2389 if (ap->a_events & (POLLIN | POLLRDNORM)) {
984263bc 2390 if (sc->queue.count > 0)
fef8985e 2391 revents |= ap->a_events & (POLLIN | POLLRDNORM);
984263bc 2392 else
fef8985e 2393 selrecord(curthread, &sc->rsel);
984263bc 2394 }
a6f9c039 2395 crit_exit();
fef8985e
MD		 2396 ap->a_events = revents;
2397 return (0);
984263bc
MD		 2398}
2399
2400/* vendor/model specific routines */
2401
2402static int mouse_id_proc1(KBDC kbdc, int res, int scale, int *status)
2403{
2404 if (set_mouse_resolution(kbdc, res) != res)
2405 return FALSE;
2406 if (set_mouse_scaling(kbdc, scale)
2407 && set_mouse_scaling(kbdc, scale)
2408 && set_mouse_scaling(kbdc, scale)
2409 && (get_mouse_status(kbdc, status, 0, 3) >= 3))
2410 return TRUE;
2411 return FALSE;
2412}
2413
2414static int
2415mouse_ext_command(KBDC kbdc, int command)
2416{
2417 int c;
2418
2419 c = (command >> 6) & 0x03;
2420 if (set_mouse_resolution(kbdc, c) != c)
2421 return FALSE;
2422 c = (command >> 4) & 0x03;
2423 if (set_mouse_resolution(kbdc, c) != c)
2424 return FALSE;
2425 c = (command >> 2) & 0x03;
2426 if (set_mouse_resolution(kbdc, c) != c)
2427 return FALSE;
2428 c = (command >> 0) & 0x03;
2429 if (set_mouse_resolution(kbdc, c) != c)
2430 return FALSE;
2431 return TRUE;
2432}
2433
2434#if notyet
2435/* Logitech MouseMan Cordless II */
2436static int
2437enable_lcordless(struct psm_softc *sc)
2438{
2439 int status[3];
2440 int ch;
2441
2442 if (!mouse_id_proc1(sc->kbdc, PSMD_RES_HIGH, 2, status))
2443 return FALSE;
2444 if (status[1] == PSMD_RES_HIGH)
2445 return FALSE;
2446 ch = (status[0] & 0x07) - 1; /* channel # */
2447 if ((ch <= 0) || (ch > 4))
2448 return FALSE;
2449 /*
2450 * status[1]: always one?
2451 * status[2]: battery status? (0-100)
2452 */
2453 return TRUE;
2454}
2455#endif /* notyet */
2456
2457/* Genius NetScroll Mouse, MouseSystems SmartScroll Mouse */
2458static int
2459enable_groller(struct psm_softc *sc)
2460{
2461 int status[3];
2462
2463 /*
2464 * The special sequence to enable the fourth button and the
2465 * roller. Immediately after this sequence check status bytes.
2466 * if the mouse is NetScroll, the second and the third bytes are
2467 * '3' and 'D'.
2468 */
2469
2470 /*
2471 * If the mouse is an ordinary PS/2 mouse, the status bytes should
2472 * look like the following.
2473 *
2474 * byte 1 bit 7 always 0
2475 * bit 6 stream mode (0)
2476 * bit 5 disabled (0)
2477 * bit 4 1:1 scaling (0)
2478 * bit 3 always 0
2479 * bit 0-2 button status
2480 * byte 2 resolution (PSMD_RES_HIGH)
2481 * byte 3 report rate (?)
2482 */
2483
2484 if (!mouse_id_proc1(sc->kbdc, PSMD_RES_HIGH, 1, status))
2485 return FALSE;
2486 if ((status[1] != '3') || (status[2] != 'D'))
2487 return FALSE;
2488 /* FIXME: SmartScroll Mouse has 5 buttons! XXX */
2489 sc->hw.buttons = 4;
2490 return TRUE;
2491}
2492
2493/* Genius NetMouse/NetMouse Pro, ASCII Mie Mouse, NetScroll Optical */
2494static int
2495enable_gmouse(struct psm_softc *sc)
2496{
2497 int status[3];
2498
2499 /*
2500 * The special sequence to enable the middle, "rubber" button.
2501 * Immediately after this sequence check status bytes.
2502 * if the mouse is NetMouse, NetMouse Pro, or ASCII MIE Mouse,
2503 * the second and the third bytes are '3' and 'U'.
2504 * NOTE: NetMouse reports that it has three buttons although it has
2505 * two buttons and a rubber button. NetMouse Pro and MIE Mouse
2506 * say they have three buttons too and they do have a button on the
2507 * side...
2508 */
2509 if (!mouse_id_proc1(sc->kbdc, PSMD_RES_HIGH, 1, status))
2510 return FALSE;
2511 if ((status[1] != '3') || (status[2] != 'U'))
2512 return FALSE;
2513 return TRUE;
2514}
2515
2516/* ALPS GlidePoint */
2517static int
2518enable_aglide(struct psm_softc *sc)
2519{
2520 int status[3];
2521
2522 /*
2523 * The special sequence to obtain ALPS GlidePoint specific
2524 * information. Immediately after this sequence, status bytes will
2525 * contain something interesting.
2526 * NOTE: ALPS produces several models of GlidePoint. Some of those
2527 * do not respond to this sequence, thus, cannot be detected this way.
2528 */
2529 if (set_mouse_sampling_rate(sc->kbdc, 100) != 100)
2530 return FALSE;
2531 if (!mouse_id_proc1(sc->kbdc, PSMD_RES_LOW, 2, status))
2532 return FALSE;
2533 if ((status[1] == PSMD_RES_LOW) || (status[2] == 100))
2534 return FALSE;
2535 return TRUE;
2536}
2537
2538/* Kensington ThinkingMouse/Trackball */
2539static int
2540enable_kmouse(struct psm_softc *sc)
2541{
2542 static unsigned char rate[] = { 20, 60, 40, 20, 20, 60, 40, 20, 20 };
2543 KBDC kbdc = sc->kbdc;
2544 int status[3];
2545 int id1;
2546 int id2;
2547 int i;
2548
2549 id1 = get_aux_id(kbdc);
2550 if (set_mouse_sampling_rate(kbdc, 10) != 10)
2551 return FALSE;
2552 /*
2553 * The device is now in the native mode? It returns a different
2554 * ID value...
2555 */
2556 id2 = get_aux_id(kbdc);
2557 if ((id1 == id2) || (id2 != 2))
2558 return FALSE;
2559
2560 if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW)
2561 return FALSE;
2562#if PSM_DEBUG >= 2
2563 /* at this point, resolution is LOW, sampling rate is 10/sec */
2564 if (get_mouse_status(kbdc, status, 0, 3) < 3)
2565 return FALSE;
2566#endif
2567
2568 /*
2569 * The special sequence to enable the third and fourth buttons.
2570 * Otherwise they behave like the first and second buttons.
2571 */
2572 for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i) {
2573 if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
2574 return FALSE;
2575 }
2576
2577 /*
2578 * At this point, the device is using default resolution and
2579 * sampling rate for the native mode.
2580 */
2581 if (get_mouse_status(kbdc, status, 0, 3) < 3)
2582 return FALSE;
2583 if ((status[1] == PSMD_RES_LOW) || (status[2] == rate[i - 1]))
2584 return FALSE;
2585
2586 /* the device appears be enabled by this sequence, diable it for now */
2587 disable_aux_dev(kbdc);
2588 empty_aux_buffer(kbdc, 5);
2589
2590 return TRUE;
2591}
2592
2593/* Logitech MouseMan+/FirstMouse+, IBM ScrollPoint Mouse */
2594static int
2595enable_mmanplus(struct psm_softc *sc)
2596{
2597 KBDC kbdc = sc->kbdc;
2598 int data[3];
2599
2600 /* the special sequence to enable the fourth button and the roller. */
2601 /*
2602 * NOTE: for ScrollPoint to respond correctly, the SET_RESOLUTION
2603 * must be called exactly three times since the last RESET command
2604 * before this sequence. XXX
2605 */
2606 if (!set_mouse_scaling(kbdc, 1))
2607 return FALSE;
2608 if (!mouse_ext_command(kbdc, 0x39) || !mouse_ext_command(kbdc, 0xdb))
2609 return FALSE;
2610 if (get_mouse_status(kbdc, data, 1, 3) < 3)
2611 return FALSE;
2612
2613 /*
2614 * PS2++ protocl, packet type 0
2615 *
2616 * b7 b6 b5 b4 b3 b2 b1 b0
2617 * byte 1: * 1 p3 p2 1 * * *
2618 * byte 2: 1 1 p1 p0 m1 m0 1 0
2619 * byte 3: m7 m6 m5 m4 m3 m2 m1 m0
2620 *
2621 * p3-p0: packet type: 0
2622 * m7-m0: model ID: MouseMan+:0x50, FirstMouse+:0x51, ScrollPoint:0x58...
2623 */
2624 /* check constant bits */
2625 if ((data[0] & MOUSE_PS2PLUS_SYNCMASK) != MOUSE_PS2PLUS_SYNC)
2626 return FALSE;
2627 if ((data[1] & 0xc3) != 0xc2)
2628 return FALSE;
2629 /* check d3-d0 in byte 2 */
2630 if (!MOUSE_PS2PLUS_CHECKBITS(data))
2631 return FALSE;
2632 /* check p3-p0 */
2633 if (MOUSE_PS2PLUS_PACKET_TYPE(data) != 0)
2634 return FALSE;
2635
2636 sc->hw.hwid &= 0x00ff;
2637 sc->hw.hwid |= data[2] << 8; /* save model ID */
2638
2639 /*
2640 * MouseMan+ (or FirstMouse+) is now in its native mode, in which
2641 * the wheel and the fourth button events are encoded in the
2642 * special data packet. The mouse may be put in the IntelliMouse mode
2643 * if it is initialized by the IntelliMouse's method.
2644 */
2645 return TRUE;
2646}
2647
2648/* MS IntelliMouse Explorer */
2649static int
2650enable_msexplorer(struct psm_softc *sc)
2651{
2652 static unsigned char rate0[] = { 200, 100, 80, };
2653 static unsigned char rate1[] = { 200, 200, 80, };
2654 KBDC kbdc = sc->kbdc;
2655 int id;
2656 int i;
2657
2658 /* the special sequence to enable the extra buttons and the roller. */
2659 for (i = 0; i < sizeof(rate1)/sizeof(rate1[0]); ++i) {
2660 if (set_mouse_sampling_rate(kbdc, rate1[i]) != rate1[i])
2661 return FALSE;
2662 }
2663 /* the device will give the genuine ID only after the above sequence */
2664 id = get_aux_id(kbdc);
2665 if (id != PSM_EXPLORER_ID)
2666 return FALSE;
2667
2668 sc->hw.hwid = id;
2669 sc->hw.buttons = 5; /* IntelliMouse Explorer XXX */
2670
2671 /*
2672 * XXX: this is a kludge to fool some KVM switch products
2673 * which think they are clever enough to know the 4-byte IntelliMouse
2674 * protocol, and assume any other protocols use 3-byte packets.
2675 * They don't convey 4-byte data packets from the IntelliMouse Explorer
2676 * correctly to the host computer because of this!
2677 * The following sequence is actually IntelliMouse's "wake up"
2678 * sequence; it will make the KVM think the mouse is IntelliMouse
2679 * when it is in fact IntelliMouse Explorer.
2680 */
2681 for (i = 0; i < sizeof(rate0)/sizeof(rate0[0]); ++i) {
2682 if (set_mouse_sampling_rate(kbdc, rate0[i]) != rate0[i])
2683 break;
2684 }
2685 id = get_aux_id(kbdc);
2686
2687 return TRUE;
2688}
2689
2690/* MS IntelliMouse */
2691static int
2692enable_msintelli(struct psm_softc *sc)
2693{
2694 /*
2695 * Logitech MouseMan+ and FirstMouse+ will also respond to this
2696 * probe routine and act like IntelliMouse.
2697 */
2698
2699 static unsigned char rate[] = { 200, 100, 80, };
2700 KBDC kbdc = sc->kbdc;
2701 int id;
2702 int i;
2703
2704 /* the special sequence to enable the third button and the roller. */
2705 for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i) {
2706 if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
2707 return FALSE;
2708 }
2709 /* the device will give the genuine ID only after the above sequence */
2710 id = get_aux_id(kbdc);
2711 if (id != PSM_INTELLI_ID)
2712 return FALSE;
2713
2714 sc->hw.hwid = id;
2715 sc->hw.buttons = 3;
2716
2717 return TRUE;
2718}
2719
2720/* A4 Tech 4D Mouse */
2721static int
2722enable_4dmouse(struct psm_softc *sc)
2723{
2724 /*
2725 * Newer wheel mice from A4 Tech may use the 4D+ protocol.
2726 */
2727
2728 static unsigned char rate[] = { 200, 100, 80, 60, 40, 20 };
2729 KBDC kbdc = sc->kbdc;
2730 int id;
2731 int i;
2732
2733 for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i) {
2734 if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
2735 return FALSE;
2736 }
2737 id = get_aux_id(kbdc);
2738 /*
2739 * WinEasy 4D, 4 Way Scroll 4D: 6
2740 * Cable-Free 4D: 8 (4DPLUS)
2741 * WinBest 4D+, 4 Way Scroll 4D+: 8 (4DPLUS)
2742 */
2743 if (id != PSM_4DMOUSE_ID)
2744 return FALSE;
2745
2746 sc->hw.hwid = id;
2747 sc->hw.buttons = 3; /* XXX some 4D mice have 4? */
2748
2749 return TRUE;
2750}
2751
2752/* A4 Tech 4D+ Mouse */
2753static int
2754enable_4dplus(struct psm_softc *sc)
2755{
2756 /*
2757 * Newer wheel mice from A4 Tech seem to use this protocol.
2758 * Older models are recognized as either 4D Mouse or IntelliMouse.
2759 */
2760 KBDC kbdc = sc->kbdc;
2761 int id;
2762
2763 /*
2764 * enable_4dmouse() already issued the following ID sequence...
2765 static unsigned char rate[] = { 200, 100, 80, 60, 40, 20 };
2766 int i;
2767
2768 for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i) {
2769 if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
2770 return FALSE;
2771 }
2772 */
2773
2774 id = get_aux_id(kbdc);
2775 if (id != PSM_4DPLUS_ID)
2776 return FALSE;
2777
2778 sc->hw.hwid = id;
2779 sc->hw.buttons = 4; /* XXX */
2780
2781 return TRUE;
2782}
2783
2784/* Interlink electronics VersaPad */
2785static int
2786enable_versapad(struct psm_softc *sc)
2787{
2788 KBDC kbdc = sc->kbdc;
2789 int data[3];
2790
2791 set_mouse_resolution(kbdc, PSMD_RES_MEDIUM_HIGH); /* set res. 2 */
2792 set_mouse_sampling_rate(kbdc, 100); /* set rate 100 */
2793 set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
2794 set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
2795 set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
2796 set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
2797 if (get_mouse_status(kbdc, data, 0, 3) < 3) /* get status */
2798 return FALSE;
2799 if (data[2] != 0xa || data[1] != 0 ) /* rate == 0xa && res. == 0 */
2800 return FALSE;
2801 set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
2802
2803 sc->config |= PSM_CONFIG_HOOKRESUME | PSM_CONFIG_INITAFTERSUSPEND;
2804
2805 return TRUE; /* PS/2 absolute mode */
2806}
2807
2808static int
2809psmresume(device_t dev)
2810{
2811 struct psm_softc *sc = device_get_softc(dev);
2812 int unit = device_get_unit(dev);
2813 int err;
2814
2815 if (verbose >= 2)
2816 log(LOG_NOTICE, "psm%d: system resume hook called.\n", unit);
2817
2818 if (!(sc->config & PSM_CONFIG_HOOKRESUME))
2819 return (0);
2820
2821 err = reinitialize(sc, sc->config & PSM_CONFIG_INITAFTERSUSPEND);
2822
2823 if ((sc->state & PSM_ASLP) && !(sc->state & PSM_VALID)) {
2824 /*
2825 * Release the blocked process; it must be notified that the device
2826 * cannot be accessed anymore.
2827 */
2828 sc->state &= ~PSM_ASLP;
2829 wakeup((caddr_t)sc);
2830 }
2831
2832 if (verbose >= 2)
2833 log(LOG_DEBUG, "psm%d: system resume hook exiting.\n", unit);
2834
2835 return (err);
2836}
2837
2838DRIVER_MODULE(psm, atkbdc, psm_driver, psm_devclass, 0, 0);
DragonFly Project GIT Source repo