Remove traces of ACPI_QUIRK_VMWARE, should be no longer needed.
[dragonfly.git] / sys / config / JG64
CommitLineData
92d33996 1#
b2b3ffcd 2# JG64 -- Generic kernel configuration file for DragonFly/x86_64
92d33996
MD
3#
4# Check the LINT configuration file in sys/config, for an
5# exhaustive list of options.
6#
4a0df967 7# $DragonFly: src/sys/config/JG64,v 1.2 2008/09/28 20:58:11 victor Exp $
92d33996
MD
8
9platform pc64
b2b3ffcd
SS
10machine x86_64
11machine_arch x86_64
92d33996
MD
12cpu HAMMER_CPU
13ident JG64
14maxusers 0
15
16makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
17
18##options MATH_EMULATE #Support for x87 emulation
19options INET #InterNETworking
20options INET6 #IPv6 communications protocols
21options HAMMER #Hammer Filesystem
4a7837fb 22options NULLFS #NULLFS
92d33996
MD
23options FFS #Berkeley Fast Filesystem
24options FFS_ROOT #FFS usable as root device [keep this!]
25options SOFTUPDATES #Enable FFS soft updates support
26options UFS_DIRHASH #Improve performance on big directories
27options MFS #Memory Filesystem
28options MD_ROOT #MD is a potential root device
29options NFS #Network Filesystem
30options NFS_ROOT #NFS usable as root device, NFS required
31options MSDOSFS #MSDOS Filesystem
32options CD9660 #ISO 9660 Filesystem
a6a09809 33options PROCFS #Process filesystem
b2b3ffcd 34#JG do we need it? does it work (on x86_64)?
92d33996
MD
35options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
36##options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
37options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
38options DEVICE_POLLING # Support mixed interrupt-polling
39 # handling of network device drivers
40##options UCONSOLE #Allow users to grab the console
41##options USERCONFIG #boot -c editor
42##options VISUAL_USERCONFIG #visual boot -c editor
5347affc 43options KTRACE #ktrace(1) support
92d33996
MD
44options SYSVSHM #SYSV-style shared memory
45options SYSVMSG #SYSV-style message queues
46options SYSVSEM #SYSV-style semaphores
47options P1003_1B #Posix P1003_1B real-time extensions
48options _KPOSIX_PRIORITY_SCHEDULING
49##options ICMP_BANDLIM #Rate limit bad replies
50##options KBD_INSTALL_CDEV # install a CDEV entry in /dev
51options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
52 # output. Adds ~128k to driver.
53options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
54 # output. Adds ~215k to driver.
55
56# To make an SMP kernel both SMP and APIC_IO are usually
57# specified. SMP boxes with severely broken BIOSes which
58# boot fine for non-SMP builds *might* work in SMP mode
59# if you define SMP and leave APIC_IO turned off.
60#
61#options SMP # Symmetric MultiProcessor Kernel
62#options APIC_IO # Symmetric (APIC) I/O
63
64# Debugging for Development
65options DDB
66options DDB_TRACE
67options INVARIANTS
68
92d33996
MD
69device isa
70##device eisa
71device pci
72
73# Floppy drives
74##device fdc0 at isa? port IO_FD1 irq 6 drq 2
75##device fd0 at fdc0 drive 0
76##device fd1 at fdc0 drive 1
77#
78# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
79# don't use the above line for fdc0 but the following one:
80#device fdc0
81
21e0df64
MD
82# AHCI driver, this will override NATA for AHCI devices,
83# both drivers may be included.
84#
85device ahci
86
87# Sil3124/3132/3531 driver
88#
89device sili
90
92d33996
MD
91# NEW-ATA (NATA) and ATAPI devices
92#
93device nata
94device natadisk # ATA disk drives
95device natapicd # ATAPI CDROM drives
96device natapifd # ATAPI floppy drives
97device natapist # ATAPI tape drives
98device natapicam # Emulate ATAPI devices as SCSI
99device nataraid # support for ATA software RAID
100 # controllers
101##device natausb # ATA-over-USB support
102options ATA_STATIC_ID # Static device numbering
92d33996
MD
103
104# LEGACY ATA and ATAPI devices
105#device ata0 at isa? port IO_WD1 irq 14
106#device ata1 at isa? port IO_WD2 irq 15
107#device ata
108#device atadisk # ATA disk drives
109#device atapicd # ATAPI CDROM drives
110#device atapifd # ATAPI floppy drives
111#device atapist # ATAPI tape drives
112#device atapicam # Emulate ATAPI devices as SCSI via CAM
113#options ATA_STATIC_ID #Static device numbering
114
115# SCSI Controllers
116##device ahb # EISA AHA1742 family
117##device ahc # AHA2940 and onboard AIC7xxx devices
118##device ahd # AHA39320/29320 and onboard AIC79xx devices
119##device amd # AMD 53C974 (Tekram DC-390(T))
120##device isp # Qlogic family
121##device mpt # LSI-Logic MPT/Fusion
122##device ncr # NCR/Symbios Logic
123##device sym # NCR/Symbios Logic (newer chipsets)
124##options SYM_SETUP_LP_PROBE_MAP=0x40
125 # Allow ncr to attach legacy NCR devices when
126 # both sym and ncr are configured
127
128##device adv0 at isa?
129##device adw
130##device bt0 at isa?
131##device aha0 at isa?
132##device aic0 at isa?
133
134##device ncv # NCR 53C500
135##device nsp # Workbit Ninja SCSI-3
136##device stg # TMC 18C30/18C50
137
138# SCSI peripherals
139device scbus # SCSI bus (required)
140device da # Direct Access (disks)
141device sa # Sequential Access (tape etc)
142device cd # CD
143device pass # Passthrough device (direct SCSI access)
144
145# RAID controllers interfaced to the SCSI subsystem
146##device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
147##device dpt # DPT Smartcache - See LINT for options!
148##device iir # Intel Integrated RAID
149##device mly # Mylex AcceleRAID/eXtremeRAID
150##device ciss # Compaq SmartRAID 5* series
151
152# RAID controllers
153##device aac # Adaptec FSA RAID, Dell PERC2/PERC3
154#device aacp # SCSI passthrough for aac (requires CAM)
155##device ida # Compaq Smart RAID
156##device ips # IBM ServeRAID
157##device amr # AMI MegaRAID
158##device mlx # Mylex DAC960 family
159##device twe # 3ware Escalade 7000/8000's
160##device twa # 3ware Escalade 9000's
161##device pst # Promise Supertrack
162
163# atkbdc0 controls both the keyboard and the PS/2 mouse
164device atkbdc0 at isa? port IO_KBD
165device atkbd0 at atkbdc? irq 1 flags 0x1
166device psm0 at atkbdc? irq 12
167
168device vga0 at isa?
169
170# splash screen/screen saver
171pseudo-device splash
172
173# syscons is the default console driver, resembling an SCO console
174device sc0 at isa? flags 0x100
175##options SC_PIXEL_MODE # add support for the raster text mode
176
177##device agp # support several AGP chipsets
178
179# Floating point support - do not disable.
180##device npx0 at nexus? port IO_NPX irq 13
181
182# Power management support (see LINT for more options)
183##device apm0 at nexus? disable flags 0x20 # Advanced Power Management
184
185# HW monitoring devices
186##device lm0 at isa? port 0x290
187##device it0 at isa? port 0x290
188##device it1 at isa? port 0xc00
189##device it2 at isa? port 0xd00
190
191# PCCARD (PCMCIA) support
192##device pccard
193##device cardbus
194##device cbb
195
196# Serial (COM) ports
197device sio0 at isa? port IO_COM1 flags 0x10 irq 4
198device sio1 at isa? port IO_COM2 irq 3
199device sio2 at isa? disable port IO_COM3 irq 5
200device sio3 at isa? disable port IO_COM4 irq 9
201
202# Parallel port
203##device ppc0 at isa? irq 7
204##device ppbus # Parallel port bus (required)
205##device lpt # Printer
206##device plip # TCP/IP over parallel
207##device ppi # Parallel port interface device
208#device vpo # Requires scbus and da
209
210
211# PCI Ethernet NICs.
212device de # DEC/Intel DC21x4x (``Tulip'')
92d33996
MD
213device txp # 3Com 3cR990 (``Typhoon'')
214device vx # 3Com 3c590, 3c595 (``Vortex'')
215
9c80d176
SZ
216device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
217 # Requires ig_hal
218device ig_hal # Intel PRO/1000 hardware abstraction layer
219
92d33996
MD
220# PCI Ethernet NICs that use the common MII bus controller code.
221# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
222device miibus # MII bus support
223device bce # Broadcom NetXtreme II Gigabit Ethernet
224device bfe # Broadcom BCM440x 10/100 Ethernet
225device dc # DEC/Intel 21143 and various workalikes
226device et # Agere ET1310 10/100/1000 Ethernet
227device fxp # Intel EtherExpress PRO/100B (82557, 82558)
228device pcn # AMD Am79C97x PCI 10/100 NICs
229device rl # RealTek 8129/8139
230device re # RealTek 8139C+/8169
231device sf # Adaptec AIC-6915 (``Starfire'')
232device sis # Silicon Integrated Systems SiS 900/SiS 7016
233device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
234device ste # Sundance ST201 (D-Link DFE-550TX)
235device tl # Texas Instruments ThunderLAN
236device tx # SMC EtherPower II (83c170 ``EPIC'')
237device vge # VIA 612x GigE
238device vr # VIA Rhine, Rhine II
239device wb # Winbond W89C840F
240device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
241device bge # Broadcom BCM570x (``Tigon III'')
242device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
243device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
244device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
245
246# ISA Ethernet NICs.
247# 'device ed' requires 'device miibus'
248##device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
249##device ex
250##device ep
251##device fe0 at isa? disable port 0x300
252# Xircom Ethernet
253##device xe
254
255# Wireless NIC cards
256##device wlan # 802.11 support
257##device wlan_ccmp # 802.11 CCMP support
258##device wlan_tkip # 802.11 TKIP support
259##device wlan_wep # 802.11 WEP support
260# 802.11 TX rate control algorithms
261#device wlan_ratectl_amrr # AMRR
262##device wlan_ratectl_onoe # Onoe
263##device wlan_ratectl_sample # Sample
264
265# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
266# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
267# mode (the factory default). If you set the switches on your ISA
268# card for a manually chosen I/O address and IRQ, you must specify
269# those parameters here.
270##device an
271##device ral # Ralink Technology 802.11 wireless NIC
272 # Requires wlan_ratectl_onoe and
273 # wlan_ratectl_sample
274##device rtw # RealTek 802.11 wireless NIC
275 # Requires wlan_ratectl_onoe and wlan_wep
276# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
277# exists only as a PCMCIA device, so there is no ISA attachment needed
278# and resources will always be dynamically assigned by the pccard code.
279##device wi
280
281# The probe order of these is presently determined by i386/isa/isa_compat.c.
282##device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
283#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
284##device lnc0 at isa? disable port 0x280 irq 10 drq 0
285##device cs0 at isa? disable port 0x300
286##device sn0 at isa? disable port 0x300 irq 10
287
288# Pseudo devices - the number indicates how many units to allocate.
289pseudo-device loop # Network loopback
290pseudo-device ether # Ethernet support
291pseudo-device sl 1 # Kernel SLIP
292pseudo-device ppp 1 # Kernel PPP
293pseudo-device tun # Packet tunnel.
294pseudo-device pty # Pseudo-ttys (telnet etc)
295pseudo-device md # Memory "disks"
296pseudo-device gif # IPv6 and IPv4 tunneling
297pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
298
299# The `bpf' pseudo-device enables the Berkeley Packet Filter.
300# Be aware of the administrative consequences of enabling this!
301pseudo-device bpf #Berkeley packet filter
302
303##pseudo-device crypto # core crypto support, used by wlan
304
305# USB support
21e0df64
MD
306device uhci # UHCI PCI->USB interface
307device ohci # OHCI PCI->USB interface
308device usb # USB Bus (required)
309device ugen # Generic
310device uhid # "Human Interface Devices"
311device ukbd # Keyboard
312device ulpt # Printer
313device umass # Disks/Mass storage - Requires scbus and da
314device ums # Mouse
315device uscanner # Scanners
316device urio # Diamond Rio MP3 Player
92d33996 317# USB Ethernet, requires mii
21e0df64
MD
318device aue # ADMtek USB ethernet
319device axe # ASIX Electronics USB Ethernet
320device cue # CATC USB ethernet
321device kue # Kawasaki LSI USB ethernet
322#device rue # RealTek 8150 based USB ethernet
92d33996 323# USB wireless NICs, requires wlan, wlan_ratectl_onoe
21e0df64
MD
324#device rum # Ralink Technology RT2501USB/RT2601USB
325#device ural # Ralink Technology RT2500USB
92d33996
MD
326
327# FireWire support
328##device firewire # FireWire bus code
329##device sbp # SCSI over FireWire (Requires scbus and da)
330##device fwe # Ethernet over FireWire (non-standard!)