Remove traces of ACPI_QUIRK_VMWARE, should be no longer needed.
[dragonfly.git] / sys / config / X86_64_GENERIC
CommitLineData
a4c6d2b3 1#
b2b3ffcd 2# GENERIC -- Generic kernel configuration file for DragonFly/x86_64
a4c6d2b3
YY
3#
4# Check the LINT configuration file in sys/config, for an
5# exhaustive list of options.
a4c6d2b3
YY
6
7platform pc64
b2b3ffcd
SS
8machine x86_64
9machine_arch x86_64
f7701355 10cpu HAMMER_CPU
b2b3ffcd 11ident X86_64_GENERIC
a4c6d2b3
YY
12maxusers 0
13
14makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
15
a4c6d2b3
YY
16options INET #InterNETworking
17options INET6 #IPv6 communications protocols
503ce1e0 18options HAMMER #Hammer Filesystem
a4c6d2b3
YY
19options FFS #Berkeley Fast Filesystem
20options FFS_ROOT #FFS usable as root device [keep this!]
21options SOFTUPDATES #Enable FFS soft updates support
22options UFS_DIRHASH #Improve performance on big directories
23options MFS #Memory Filesystem
24options MD_ROOT #MD is a potential root device
25options NFS #Network Filesystem
26options NFS_ROOT #NFS usable as root device, NFS required
27options MSDOSFS #MSDOS Filesystem
28options CD9660 #ISO 9660 Filesystem
29options PROCFS #Process filesystem
30options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
a4c6d2b3
YY
31options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
32options DEVICE_POLLING # Support mixed interrupt-polling
33 # handling of network device drivers
34options UCONSOLE #Allow users to grab the console
a4c6d2b3
YY
35options KTRACE #ktrace(1) support
36options SYSVSHM #SYSV-style shared memory
37options SYSVMSG #SYSV-style message queues
38options SYSVSEM #SYSV-style semaphores
39options P1003_1B #Posix P1003_1B real-time extensions
40options _KPOSIX_PRIORITY_SCHEDULING
41options ICMP_BANDLIM #Rate limit bad replies
503ce1e0 42options KBD_INSTALL_CDEV # install a CDEV entry in /dev
a4c6d2b3
YY
43options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
44 # output. Adds ~128k to driver.
503ce1e0 45options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
a4c6d2b3
YY
46 # output. Adds ~215k to driver.
47
48# To make an SMP kernel both SMP and APIC_IO are usually
49# specified. SMP boxes with severely broken BIOSes which
50# boot fine for non-SMP builds *might* work in SMP mode
51# if you define SMP and leave APIC_IO turned off.
52#
53#options SMP # Symmetric MultiProcessor Kernel
54#options APIC_IO # Symmetric (APIC) I/O
55
56# Debugging for Development
57options DDB
58options DDB_TRACE
59options INVARIANTS
60
0855a2af 61device isa
503ce1e0
SS
62device pci
63
64# AHCI driver, this will override NATA for AHCI devices,
65# both drivers may be included.
66#
67device ahci
a4c6d2b3 68
503ce1e0 69# Sil3124/3132/3531 driver
a4c6d2b3 70#
503ce1e0 71device sili
a4c6d2b3
YY
72
73# NEW-ATA (NATA) and ATAPI devices
74#
503ce1e0
SS
75device nata
76device natadisk # ATA disk drives
77device natapicd # ATAPI CDROM drives
78device natapifd # ATAPI floppy drives
79device natapist # ATAPI tape drives
80device natapicam # Emulate ATAPI devices as SCSI
81device nataraid # support for ATA software RAID
a4c6d2b3 82 # controllers
503ce1e0
SS
83device natausb # ATA-over-USB support
84options ATA_STATIC_ID # Static device numbering
a4c6d2b3
YY
85
86# LEGACY ATA and ATAPI devices
87#device ata0 at isa? port IO_WD1 irq 14
88#device ata1 at isa? port IO_WD2 irq 15
89#device ata
90#device atadisk # ATA disk drives
91#device atapicd # ATAPI CDROM drives
92#device atapifd # ATAPI floppy drives
93#device atapist # ATAPI tape drives
94#device atapicam # Emulate ATAPI devices as SCSI via CAM
95#options ATA_STATIC_ID #Static device numbering
96
503ce1e0
SS
97# SCSI Controllers
98device ahb # EISA AHA1742 family
99device ahc # AHA2940 and onboard AIC7xxx devices
100device ahd # AHA39320/29320 and onboard AIC79xx devices
101device amd # AMD 53C974 (Tekram DC-390(T))
102device isp # Qlogic family
103device mpt # LSI-Logic MPT/Fusion
104device ncr # NCR/Symbios Logic
105device sym # NCR/Symbios Logic (newer chipsets)
106options SYM_SETUP_LP_PROBE_MAP=0x40
107 # Allow ncr to attach legacy NCR devices when
108 # both sym and ncr are configured
109
110device adv0 at isa?
111device adw
112device bt0 at isa?
113device aha0 at isa?
114device aic0 at isa?
115
116device ncv # NCR 53C500
117device nsp # Workbit Ninja SCSI-3
118device stg # TMC 18C30/18C50
119
120# SCSI peripherals
121device scbus # SCSI bus (required)
122device da # Direct Access (disks)
123device sa # Sequential Access (tape etc)
124device cd # CD
125device pass # Passthrough device (direct SCSI access)
126device sg # Passthrough device (linux scsi generic)
127
128# RAID controllers interfaced to the SCSI subsystem
129device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
130device dpt # DPT Smartcache - See LINT for options!
131device iir # Intel Integrated RAID
132device mly # Mylex AcceleRAID/eXtremeRAID
133device ciss # Compaq SmartRAID 5* series
134
135# RAID controllers
136device aac # Adaptec FSA RAID, Dell PERC2/PERC3
137#device aacp # SCSI passthrough for aac (requires CAM)
138device ida # Compaq Smart RAID
139device ips # IBM ServeRAID
140device amr # AMI MegaRAID
141device mlx # Mylex DAC960 family
142device twe # 3ware Escalade 7000/8000's
143device twa # 3ware Escalade 9000's
144
145# atkbdc0 controls both the keyboard and the PS/2 mouse
146device atkbdc0 at isa? port IO_KBD
147device atkbd0 at atkbdc? irq 1 flags 0x1
148device psm0 at atkbdc? irq 12
149
150device vga0 at isa?
151
152# kbdmux is the keyboard multiplexer
153device kbdmux
154
155# splash screen/screen saver
156pseudo-device splash
157
a4c6d2b3 158# syscons is the default console driver, resembling an SCO console
503ce1e0
SS
159device sc0 at isa? flags 0x100
160options SC_PIXEL_MODE # add support for the raster text mode
a4c6d2b3 161
503ce1e0 162device agp # support several AGP chipsets
a4c6d2b3 163
503ce1e0
SS
164# HW monitoring devices
165device lm0 at isa? port 0x290
166device it0 at isa? port 0x290
167device it1 at isa? port 0xc00
168device it2 at isa? port 0xd00
169
170# PCCARD (PCMCIA) support
171device pccard
172device cardbus
173device cbb
a4c6d2b3
YY
174
175# Serial (COM) ports
0855a2af
JG
176device sio0 at isa? port IO_COM1 flags 0x10 irq 4
177device sio1 at isa? port IO_COM2 irq 3
178device sio2 at isa? disable port IO_COM3 irq 5
179device sio3 at isa? disable port IO_COM4 irq 9
a4c6d2b3
YY
180
181# Parallel port
503ce1e0
SS
182device ppc0 at isa? irq 7
183device ppbus # Parallel port bus (required)
184device lpt # Printer
185device plip # TCP/IP over parallel
186device ppi # Parallel port interface device
a4c6d2b3
YY
187#device vpo # Requires scbus and da
188
503ce1e0
SS
189
190# PCI Ethernet NICs.
191device de # DEC/Intel DC21x4x (``Tulip'')
192device txp # 3Com 3cR990 (``Typhoon'')
193device vx # 3Com 3c590, 3c595 (``Vortex'')
194
195device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
196 # Requires ig_hal
197device ig_hal # Intel PRO/1000 hardware abstraction layer
198
199# PCI Ethernet NICs that use the common MII bus controller code.
200# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
201device miibus # MII bus support
202device ae # Attansic/Atheros L2 Fast Ethernet
203device age # Attansic/Atheros L1 Gigabit Ethernet
204device ale # Atheros AR8121/AR8113/AR8114
205device bce # Broadcom NetXtreme II Gigabit Ethernet
206device bfe # Broadcom BCM440x 10/100 Ethernet
207device dc # DEC/Intel 21143 and various workalikes
208device et # Agere ET1310 10/100/1000 Ethernet
209device fxp # Intel EtherExpress PRO/100B (82557, 82558)
210device jme # JMicron Gigabit/Fast Ethernet
211device pcn # AMD Am79C97x PCI 10/100 NICs
212device rl # RealTek 8129/8139
213device re # RealTek 8139C+/8169
214device sf # Adaptec AIC-6915 (``Starfire'')
215device sis # Silicon Integrated Systems SiS 900/SiS 7016
216device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
217device ste # Sundance ST201 (D-Link DFE-550TX)
218device tl # Texas Instruments ThunderLAN
219device tx # SMC EtherPower II (83c170 ``EPIC'')
220device vge # VIA 612x GigE
221device vr # VIA Rhine, Rhine II
222device wb # Winbond W89C840F
223device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
224device bge # Broadcom BCM570x (``Tigon III'')
225device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
226device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
227device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
228
229# ISA Ethernet NICs.
00039178
YT
230# 'device ed' requires 'device miibus'
231device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
503ce1e0
SS
232device ex
233# Xircom Ethernet
234device xe
235
236# Wireless NIC cards
237device wlan # 802.11 support
238device wlan_ccmp # 802.11 CCMP support
239device wlan_tkip # 802.11 TKIP support
240device wlan_wep # 802.11 WEP support
241# 802.11 TX rate control algorithms
242#device wlan_ratectl_amrr # AMRR
243device wlan_ratectl_onoe # Onoe
244device wlan_ratectl_sample # Sample
245
246# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
247# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
248# mode (the factory default). If you set the switches on your ISA
249# card for a manually chosen I/O address and IRQ, you must specify
250# those parameters here.
251device an
252device ral # Ralink Technology 802.11 wireless NIC
253 # Requires wlan_ratectl_onoe and
254 # wlan_ratectl_sample
255device rtw # RealTek 802.11 wireless NIC
256 # Requires wlan_ratectl_onoe and wlan_wep
257# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
258# exists only as a PCMCIA device, so there is no ISA attachment needed
259# and resources will always be dynamically assigned by the pccard code.
260device wi
261
262# The probe order of these is presently determined by i386/isa/isa_compat.c.
263#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
264device lnc0 at isa? disable port 0x280 irq 10 drq 0
265device cs0 at isa? disable port 0x300
266device sn0 at isa? disable port 0x300 irq 10
267
a4c6d2b3
YY
268# Pseudo devices - the number indicates how many units to allocate.
269pseudo-device loop # Network loopback
270pseudo-device ether # Ethernet support
271pseudo-device sl 1 # Kernel SLIP
272pseudo-device ppp 1 # Kernel PPP
273pseudo-device tun # Packet tunnel.
274pseudo-device pty # Pseudo-ttys (telnet etc)
275pseudo-device md # Memory "disks"
276pseudo-device gif # IPv6 and IPv4 tunneling
277pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
503ce1e0
SS
278
279# The `bpf' pseudo-device enables the Berkeley Packet Filter.
280# Be aware of the administrative consequences of enabling this!
281pseudo-device bpf #Berkeley packet filter
282
283pseudo-device crypto # core crypto support, used by wlan
284
285# USB support
286device uhci # UHCI PCI->USB interface
287device ohci # OHCI PCI->USB interface
288device usb # USB Bus (required)
289device ugen # Generic
290device uhid # "Human Interface Devices"
291device ukbd # Keyboard
292device ulpt # Printer
293device umass # Disks/Mass storage - Requires scbus and da
294device ums # Mouse
295device uscanner # Scanners
296device urio # Diamond Rio MP3 Player
297# USB Ethernet, requires mii
298device aue # ADMtek USB ethernet
299device axe # ASIX Electronics USB Ethernet
300device cue # CATC USB ethernet
301device kue # Kawasaki LSI USB ethernet
302device rue # RealTek 8150 based USB ethernet
303# USB wireless NICs, requires wlan, wlan_ratectl_onoe
304device rum # Ralink Technology RT2501USB/RT2601USB
305device ural # Ralink Technology RT2500USB
306
307# FireWire support
308device firewire # FireWire bus code
309device sbp # SCSI over FireWire (Requires scbus and da)
310device fwe # Ethernet over FireWire (non-standard!)