[dragonfly.git] / sys / dev / disk / mpt / mpilib / mpi_sas.h

/* $FreeBSD: src/sys/dev/mpt/mpilib/mpi_sas.h,v 1.4 2012/03/24 16:23:21 marius Exp $ */
/*-
 * Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon including
 *    a substantially similar Disclaimer requirement for further binary
 *    redistribution.
 * 3. Neither the name of the LSI Logic Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived from
 *    this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
 * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *           Name:  mpi_sas.h
 *          Title:  MPI Serial Attached SCSI structures and definitions
 *  Creation Date:  August 19, 2004
 *
 *    mpi_sas.h Version:  01.05.05
 *
 *  Version History
 *  ---------------
 *
 *  Date      Version   Description
 *  --------  --------  ------------------------------------------------------
 *  08-19-04  01.05.01  Original release.
 *  08-30-05  01.05.02  Added DeviceInfo bit for SEP.
 *                      Added PrimFlags and Primitive field to SAS IO Unit
 *                      Control request, and added a new operation code.
 *  03-27-06  01.05.03  Added Force Full Discovery, Transmit Port Select Signal,
 *                      and Remove Device operations to SAS IO Unit Control.
 *                      Added DevHandle field to SAS IO Unit Control request and
 *                      reply.
 *  10-11-06  01.05.04  Fixed the name of a define for Operation field of SAS IO
 *                      Unit Control request.
 *  01-15-08  01.05.05  Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
 *                      including adding IOCParameter and IOCParameter value
 *                      fields to SAS IO Unit Control Request.
 *                      Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
 *  --------------------------------------------------------------------------
 */

#ifndef MPI_SAS_H
#define MPI_SAS_H


/*
 * Values for SASStatus.
 */
#define MPI_SASSTATUS_SUCCESS                           (0x00)
#define MPI_SASSTATUS_UNKNOWN_ERROR                     (0x01)
#define MPI_SASSTATUS_INVALID_FRAME                     (0x02)
#define MPI_SASSTATUS_UTC_BAD_DEST                      (0x03)
#define MPI_SASSTATUS_UTC_BREAK_RECEIVED                (0x04)
#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED    (0x05)
#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST            (0x06)
#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED        (0x07)
#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY            (0x08)
#define MPI_SASSTATUS_UTC_WRONG_DESTINATION             (0x09)
#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT            (0x0A)
#define MPI_SASSTATUS_LONG_INFORMATION_UNIT             (0x0B)
#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA     (0x0C)
#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR     (0x0D)
#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED             (0x0E)
#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH        (0x0F)
#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA           (0x10)
#define MPI_SASSTATUS_DATA_OFFSET_ERROR                 (0x11)
#define MPI_SASSTATUS_SDSF_NAK_RECEIVED                 (0x12)
#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED            (0x13)
#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT        (0x14)


/*
 * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
 * data and SAS IO Unit Configuration pages.
 */
#define MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC    (0xF0000000)

#define MPI_SAS_DEVICE_INFO_SEP                 (0x00004000)
#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE        (0x00002000)
#define MPI_SAS_DEVICE_INFO_LSI_DEVICE          (0x00001000)
#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH       (0x00000800)
#define MPI_SAS_DEVICE_INFO_SSP_TARGET          (0x00000400)
#define MPI_SAS_DEVICE_INFO_STP_TARGET          (0x00000200)
#define MPI_SAS_DEVICE_INFO_SMP_TARGET          (0x00000100)
#define MPI_SAS_DEVICE_INFO_SATA_DEVICE         (0x00000080)
#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR       (0x00000040)
#define MPI_SAS_DEVICE_INFO_STP_INITIATOR       (0x00000020)
#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR       (0x00000010)
#define MPI_SAS_DEVICE_INFO_SATA_HOST           (0x00000008)

#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE    (0x00000007)
#define MPI_SAS_DEVICE_INFO_NO_DEVICE           (0x00000000)
#define MPI_SAS_DEVICE_INFO_END_DEVICE          (0x00000001)
#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER       (0x00000002)
#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER     (0x00000003)


/*****************************************************************************
*
*        S e r i a l    A t t a c h e d    S C S I     M e s s a g e s
*
*****************************************************************************/

/****************************************************************************/
/* Serial Management Protocol Passthrough Request                           */
/****************************************************************************/

typedef struct _MSG_SMP_PASSTHROUGH_REQUEST
{
    U8                      PassthroughFlags;   /* 00h */
    U8                      PhysicalPort;       /* 01h */
    U8                      ChainOffset;        /* 02h */
    U8                      Function;           /* 03h */
    U16                     RequestDataLength;  /* 04h */
    U8                      ConnectionRate;     /* 06h */
    U8                      MsgFlags;           /* 07h */
    U32                     MsgContext;         /* 08h */
    U32                     Reserved1;          /* 0Ch */
    U64                     SASAddress;         /* 10h */
    U32                     Reserved2;          /* 18h */
    U32                     Reserved3;          /* 1Ch */
    SGE_SIMPLE_UNION        SGL;                /* 20h */
} MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST,
  SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t;

/* values for PassthroughFlags field */
#define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE       (0x80)

/* values for ConnectionRate field */
#define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED  (0x00)
#define MPI_SMP_PT_REQ_CONNECT_RATE_1_5         (0x08)
#define MPI_SMP_PT_REQ_CONNECT_RATE_3_0         (0x09)


/* Serial Management Protocol Passthrough Reply */
typedef struct _MSG_SMP_PASSTHROUGH_REPLY
{
    U8                      PassthroughFlags;   /* 00h */
    U8                      PhysicalPort;       /* 01h */
    U8                      MsgLength;          /* 02h */
    U8                      Function;           /* 03h */
    U16                     ResponseDataLength; /* 04h */
    U8                      Reserved1;          /* 06h */
    U8                      MsgFlags;           /* 07h */
    U32                     MsgContext;         /* 08h */
    U8                      Reserved2;          /* 0Ch */
    U8                      SASStatus;          /* 0Dh */
    U16                     IOCStatus;          /* 0Eh */
    U32                     IOCLogInfo;         /* 10h */
    U32                     Reserved3;          /* 14h */
    U8                      ResponseData[4];    /* 18h */
} MSG_SMP_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REPLY,
  SmpPassthroughReply_t, MPI_POINTER pSmpPassthroughReply_t;

#define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE     (0x80)


/****************************************************************************/
/* SATA Passthrough Request                                                 */
/****************************************************************************/

typedef struct _MSG_SATA_PASSTHROUGH_REQUEST
{
    U8                      TargetID;           /* 00h */
    U8                      Bus;                /* 01h */
    U8                      ChainOffset;        /* 02h */
    U8                      Function;           /* 03h */
    U16                     PassthroughFlags;   /* 04h */
    U8                      ConnectionRate;     /* 06h */
    U8                      MsgFlags;           /* 07h */
    U32                     MsgContext;         /* 08h */
    U32                     Reserved1;          /* 0Ch */
    U32                     Reserved2;          /* 10h */
    U32                     Reserved3;          /* 14h */
    U32                     DataLength;         /* 18h */
    U8                      CommandFIS[20];     /* 1Ch */
    SGE_SIMPLE_UNION        SGL;                /* 30h */
} MSG_SATA_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REQUEST,
  SataPassthroughRequest_t, MPI_POINTER pSataPassthroughRequest_t;

/* values for PassthroughFlags field */
#define MPI_SATA_PT_REQ_PT_FLAGS_RESET_DEVICE   (0x0200)
#define MPI_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG   (0x0100)
#define MPI_SATA_PT_REQ_PT_FLAGS_DMA_QUEUED     (0x0080)
#define MPI_SATA_PT_REQ_PT_FLAGS_PACKET_COMMAND (0x0040)
#define MPI_SATA_PT_REQ_PT_FLAGS_DMA            (0x0020)
#define MPI_SATA_PT_REQ_PT_FLAGS_PIO            (0x0010)
#define MPI_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
#define MPI_SATA_PT_REQ_PT_FLAGS_WRITE          (0x0002)
#define MPI_SATA_PT_REQ_PT_FLAGS_READ           (0x0001)

/* values for ConnectionRate field */
#define MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
#define MPI_SATA_PT_REQ_CONNECT_RATE_1_5        (0x08)
#define MPI_SATA_PT_REQ_CONNECT_RATE_3_0        (0x09)


/* SATA Passthrough Reply */
typedef struct _MSG_SATA_PASSTHROUGH_REPLY
{
    U8                      TargetID;           /* 00h */
    U8                      Bus;                /* 01h */
    U8                      MsgLength;          /* 02h */
    U8                      Function;           /* 03h */
    U16                     PassthroughFlags;   /* 04h */
    U8                      Reserved1;          /* 06h */
    U8                      MsgFlags;           /* 07h */
    U32                     MsgContext;         /* 08h */
    U8                      Reserved2;          /* 0Ch */
    U8                      SASStatus;          /* 0Dh */
    U16                     IOCStatus;          /* 0Eh */
    U32                     IOCLogInfo;         /* 10h */
    U8                      StatusFIS[20];      /* 14h */
    U32                     StatusControlRegisters; /* 28h */
    U32                     TransferCount;      /* 2Ch */
} MSG_SATA_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REPLY,
  SataPassthroughReply_t, MPI_POINTER pSataPassthroughReply_t;


/****************************************************************************/
/* SAS IO Unit Control Request                                              */
/****************************************************************************/

typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
{
    U8                      Operation;          /* 00h */
    U8                      Reserved1;          /* 01h */
    U8                      ChainOffset;        /* 02h */
    U8                      Function;           /* 03h */
    U16                     DevHandle;          /* 04h */
    U8                      IOCParameter;       /* 06h */
    U8                      MsgFlags;           /* 07h */
    U32                     MsgContext;         /* 08h */
    U8                      TargetID;           /* 0Ch */
    U8                      Bus;                /* 0Dh */
    U8                      PhyNum;             /* 0Eh */
    U8                      PrimFlags;          /* 0Fh */
    U32                     Primitive;          /* 10h */
    U64                     SASAddress;         /* 14h */
    U32                     IOCParameterValue;  /* 1Ch */
} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
  SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;

/* values for the Operation field */
#define MPI_SAS_OP_CLEAR_NOT_PRESENT            (0x01)
#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT         (0x02)
#define MPI_SAS_OP_PHY_LINK_RESET               (0x06)
#define MPI_SAS_OP_PHY_HARD_RESET               (0x07)
#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG          (0x08)
#define MPI_SAS_OP_MAP_CURRENT                  (0x09)
#define MPI_SAS_OP_SEND_PRIMITIVE               (0x0A)
#define MPI_SAS_OP_FORCE_FULL_DISCOVERY         (0x0B)
#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL  (0x0C)
#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE       (0x0D)  /* obsolete name */
#define MPI_SAS_OP_REMOVE_DEVICE                (0x0D)
#define MPI_SAS_OP_SET_IOC_PARAMETER            (0x0E)
#define MPI_SAS_OP_PRODUCT_SPECIFIC_MIN         (0x80)

/* values for the PrimFlags field */
#define MPI_SAS_PRIMFLAGS_SINGLE                (0x08)
#define MPI_SAS_PRIMFLAGS_TRIPLE                (0x02)
#define MPI_SAS_PRIMFLAGS_REDUNDANT             (0x01)


/* SAS IO Unit Control Reply */
typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY
{
    U8                      Operation;          /* 00h */
    U8                      Reserved1;          /* 01h */
    U8                      MsgLength;          /* 02h */
    U8                      Function;           /* 03h */
    U16                     DevHandle;          /* 04h */
    U8                      IOCParameter;       /* 06h */
    U8                      MsgFlags;           /* 07h */
    U32                     MsgContext;         /* 08h */
    U16                     Reserved4;          /* 0Ch */
    U16                     IOCStatus;          /* 0Eh */
    U32                     IOCLogInfo;         /* 10h */
} MSG_SAS_IOUNIT_CONTROL_REPLY, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REPLY,
  SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t;

#endif
Commit	Line	Data
4c42baf4	1	/* $FreeBSD: src/sys/dev/mpt/mpilib/mpi_sas.h,v 1.4 2012/03/24 16:23:21 marius Exp $ */
2545bca0	2	/*-
4c42baf4	3	* Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
2545bca0 MD	4	* All rights reserved.
	5	*
	6	* Redistribution and use in source and binary forms, with or without
	7	* modification, are permitted provided that the following conditions are
	8	* met:
	9	* 1. Redistributions of source code must retain the above copyright
	10	* notice, this list of conditions and the following disclaimer.
	11	* 2. Redistributions in binary form must reproduce at minimum a disclaimer
	12	* substantially similar to the "NO WARRANTY" disclaimer below
	13	* ("Disclaimer") and any redistribution must be conditioned upon including
	14	* a substantially similar Disclaimer requirement for further binary
	15	* redistribution.
	16	* 3. Neither the name of the LSI Logic Corporation nor the names of its
	17	* contributors may be used to endorse or promote products derived from
	18	* this software without specific prior written permission.
	19	*
	20	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	21	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	22	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	23	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
	24	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	25	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	26	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	27	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	28	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	29	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
	30	* OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	31	*
	32	* Name: mpi_sas.h
	33	* Title: MPI Serial Attached SCSI structures and definitions
	34	* Creation Date: August 19, 2004
	35	*
4c42baf4	36	* mpi_sas.h Version: 01.05.05
2545bca0 MD	37	*
	38	* Version History
	39	* ---------------
	40	*
	41	* Date Version Description
	42	* -------- -------- ------------------------------------------------------
	43	* 08-19-04 01.05.01 Original release.
	44	* 08-30-05 01.05.02 Added DeviceInfo bit for SEP.
	45	* Added PrimFlags and Primitive field to SAS IO Unit
	46	* Control request, and added a new operation code.
	47	* 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal,
	48	* and Remove Device operations to SAS IO Unit Control.
	49	* Added DevHandle field to SAS IO Unit Control request and
	50	* reply.
	51	* 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO
	52	* Unit Control request.
4c42baf4 SW	53	* 01-15-08 01.05.05 Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
	54	* including adding IOCParameter and IOCParameter value
	55	* fields to SAS IO Unit Control Request.
	56	* Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
2545bca0 MD	57	* --------------------------------------------------------------------------
	58	*/
	59
	60	#ifndef MPI_SAS_H
	61	#define MPI_SAS_H
	62
	63
	64	/*
	65	* Values for SASStatus.
	66	*/
	67	#define MPI_SASSTATUS_SUCCESS (0x00)
	68	#define MPI_SASSTATUS_UNKNOWN_ERROR (0x01)
	69	#define MPI_SASSTATUS_INVALID_FRAME (0x02)
	70	#define MPI_SASSTATUS_UTC_BAD_DEST (0x03)
	71	#define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04)
	72	#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05)
	73	#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06)
	74	#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07)
	75	#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08)
	76	#define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09)
	77	#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A)
	78	#define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B)
	79	#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C)
	80	#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D)
	81	#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E)
	82	#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F)
	83	#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10)
	84	#define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11)
	85	#define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12)
	86	#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13)
	87	#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14)
	88
	89
	90	/*
	91	* Values for the SAS DeviceInfo field used in SAS Device Status Change Event
	92	* data and SAS IO Unit Configuration pages.
	93	*/
4c42baf4 SW	94	#define MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC (0xF0000000)
4c42baf4 SW	95
2545bca0 MD	96	#define MPI_SAS_DEVICE_INFO_SEP (0x00004000)
	97	#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
	98	#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
	99	#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
	100	#define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400)
	101	#define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200)
	102	#define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100)
	103	#define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080)
	104	#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040)
	105	#define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020)
	106	#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010)
	107	#define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008)
	108
	109	#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007)
	110	#define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000)
	111	#define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001)
	112	#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002)
	113	#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003)
	114
	115
	116
	117	/*****************************************************************************
	118	*
	119	* S e r i a l A t t a c h e d S C S I M e s s a g e s
	120	*
	121	*****************************************************************************/
	122
	123	/****************************************************************************/
	124	/* Serial Management Protocol Passthrough Request */
	125	/****************************************************************************/
	126
	127	typedef struct _MSG_SMP_PASSTHROUGH_REQUEST
	128	{
	129	U8 PassthroughFlags; /* 00h */
	130	U8 PhysicalPort; /* 01h */
	131	U8 ChainOffset; /* 02h */
	132	U8 Function; /* 03h */
	133	U16 RequestDataLength; /* 04h */
	134	U8 ConnectionRate; /* 06h */
	135	U8 MsgFlags; /* 07h */
	136	U32 MsgContext; /* 08h */
	137	U32 Reserved1; /* 0Ch */
	138	U64 SASAddress; /* 10h */
	139	U32 Reserved2; /* 18h */
	140	U32 Reserved3; /* 1Ch */
	141	SGE_SIMPLE_UNION SGL; /* 20h */
	142	} MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST,
	143	SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t;
	144
	145	/* values for PassthroughFlags field */
	146	#define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80)
	147
	148	/* values for ConnectionRate field */
	149	#define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
	150	#define MPI_SMP_PT_REQ_CONNECT_RATE_1_5 (0x08)
	151	#define MPI_SMP_PT_REQ_CONNECT_RATE_3_0 (0x09)
	152
	153
	154	/* Serial Management Protocol Passthrough Reply */
	155	typedef struct _MSG_SMP_PASSTHROUGH_REPLY
	156	{
	157	U8 PassthroughFlags; /* 00h */
	158	U8 PhysicalPort; /* 01h */
	159	U8 MsgLength; /* 02h */
160	U8 Function; /* 03h */
161	U16 ResponseDataLength; /* 04h */
162	U8 Reserved1; /* 06h */
163	U8 MsgFlags; /* 07h */
164	U32 MsgContext; /* 08h */
165	U8 Reserved2; /* 0Ch */
166	U8 SASStatus; /* 0Dh */
167	U16 IOCStatus; /* 0Eh */
168	U32 IOCLogInfo; /* 10h */
169	U32 Reserved3; /* 14h */
170	U8 ResponseData[4]; /* 18h */
171	} MSG_SMP_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REPLY,
172	SmpPassthroughReply_t, MPI_POINTER pSmpPassthroughReply_t;
173
174	#define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80)
175
176
177	/****************************************************************************/
178	/* SATA Passthrough Request */
179	/****************************************************************************/
180
181	typedef struct _MSG_SATA_PASSTHROUGH_REQUEST
182	{
183	U8 TargetID; /* 00h */
184	U8 Bus; /* 01h */
185	U8 ChainOffset; /* 02h */
186	U8 Function; /* 03h */
187	U16 PassthroughFlags; /* 04h */
188	U8 ConnectionRate; /* 06h */
189	U8 MsgFlags; /* 07h */
190	U32 MsgContext; /* 08h */
191	U32 Reserved1; /* 0Ch */
192	U32 Reserved2; /* 10h */
193	U32 Reserved3; /* 14h */
194	U32 DataLength; /* 18h */
195	U8 CommandFIS[20]; /* 1Ch */
196	SGE_SIMPLE_UNION SGL; /* 30h */
197	} MSG_SATA_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REQUEST,
198	SataPassthroughRequest_t, MPI_POINTER pSataPassthroughRequest_t;
199
200	/* values for PassthroughFlags field */
201	#define MPI_SATA_PT_REQ_PT_FLAGS_RESET_DEVICE (0x0200)
202	#define MPI_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100)
203	#define MPI_SATA_PT_REQ_PT_FLAGS_DMA_QUEUED (0x0080)
204	#define MPI_SATA_PT_REQ_PT_FLAGS_PACKET_COMMAND (0x0040)
205	#define MPI_SATA_PT_REQ_PT_FLAGS_DMA (0x0020)
206	#define MPI_SATA_PT_REQ_PT_FLAGS_PIO (0x0010)
207	#define MPI_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
208	#define MPI_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002)
209	#define MPI_SATA_PT_REQ_PT_FLAGS_READ (0x0001)
210
211	/* values for ConnectionRate field */
212	#define MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
213	#define MPI_SATA_PT_REQ_CONNECT_RATE_1_5 (0x08)
214	#define MPI_SATA_PT_REQ_CONNECT_RATE_3_0 (0x09)
215
216
217	/* SATA Passthrough Reply */
218	typedef struct _MSG_SATA_PASSTHROUGH_REPLY
219	{
220	U8 TargetID; /* 00h */
221	U8 Bus; /* 01h */
222	U8 MsgLength; /* 02h */
223	U8 Function; /* 03h */
224	U16 PassthroughFlags; /* 04h */
225	U8 Reserved1; /* 06h */
226	U8 MsgFlags; /* 07h */
227	U32 MsgContext; /* 08h */
228	U8 Reserved2; /* 0Ch */
229	U8 SASStatus; /* 0Dh */
230	U16 IOCStatus; /* 0Eh */
231	U32 IOCLogInfo; /* 10h */
232	U8 StatusFIS[20]; /* 14h */
233	U32 StatusControlRegisters; /* 28h */
234	U32 TransferCount; /* 2Ch */
235	} MSG_SATA_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REPLY,
236	SataPassthroughReply_t, MPI_POINTER pSataPassthroughReply_t;
237
238
239
240
241	/****************************************************************************/
242	/* SAS IO Unit Control Request */
243	/****************************************************************************/
244
245	typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
246	{
247	U8 Operation; /* 00h */
248	U8 Reserved1; /* 01h */
249	U8 ChainOffset; /* 02h */
250	U8 Function; /* 03h */
251	U16 DevHandle; /* 04h */
4c42baf4	252	U8 IOCParameter; /* 06h */
2545bca0 MD	253	U8 MsgFlags; /* 07h */
	254	U32 MsgContext; /* 08h */
	255	U8 TargetID; /* 0Ch */
	256	U8 Bus; /* 0Dh */
	257	U8 PhyNum; /* 0Eh */
	258	U8 PrimFlags; /* 0Fh */
	259	U32 Primitive; /* 10h */
	260	U64 SASAddress; /* 14h */
4c42baf4	261	U32 IOCParameterValue; /* 1Ch */
2545bca0 MD	262	} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
	263	SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
	264
	265	/* values for the Operation field */
	266	#define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01)
	267	#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02)
	268	#define MPI_SAS_OP_PHY_LINK_RESET (0x06)
	269	#define MPI_SAS_OP_PHY_HARD_RESET (0x07)
	270	#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
	271	#define MPI_SAS_OP_MAP_CURRENT (0x09)
	272	#define MPI_SAS_OP_SEND_PRIMITIVE (0x0A)
	273	#define MPI_SAS_OP_FORCE_FULL_DISCOVERY (0x0B)
	274	#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
	275	#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D) /* obsolete name */
	276	#define MPI_SAS_OP_REMOVE_DEVICE (0x0D)
4c42baf4 SW	277	#define MPI_SAS_OP_SET_IOC_PARAMETER (0x0E)
4c42baf4 SW	278	#define MPI_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80)
2545bca0 MD	279
	280	/* values for the PrimFlags field */
	281	#define MPI_SAS_PRIMFLAGS_SINGLE (0x08)
	282	#define MPI_SAS_PRIMFLAGS_TRIPLE (0x02)
	283	#define MPI_SAS_PRIMFLAGS_REDUNDANT (0x01)
	284
	285
	286	/* SAS IO Unit Control Reply */
	287	typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY
	288	{
	289	U8 Operation; /* 00h */
	290	U8 Reserved1; /* 01h */
	291	U8 MsgLength; /* 02h */
	292	U8 Function; /* 03h */
	293	U16 DevHandle; /* 04h */
4c42baf4	294	U8 IOCParameter; /* 06h */
2545bca0 MD	295	U8 MsgFlags; /* 07h */
	296	U32 MsgContext; /* 08h */
	297	U16 Reserved4; /* 0Ch */
	298	U16 IOCStatus; /* 0Eh */
	299	U32 IOCLogInfo; /* 10h */
	300	} MSG_SAS_IOUNIT_CONTROL_REPLY, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REPLY,
	301	SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t;
	302
	303	#endif