Remove i386 support.
[dragonfly.git] / sys / config / GENERIC
CommitLineData
984263bc 1#
8611e04d 2# GENERIC -- Generic kernel configuration file for DragonFly/i386
984263bc 3#
23e12d00 4# Check the LINT configuration file in sys/config, for an
43800c56 5# exhaustive list of options.
984263bc 6#
4db955e1 7# $DragonFly: src/sys/config/GENERIC,v 1.55 2007/11/07 17:42:50 dillon Exp $
984263bc 8
0955fd91
MD
9platform pc32
10machine i386
a9295349 11machine_arch i386
984263bc
MD
12cpu I486_CPU
13cpu I586_CPU
14cpu I686_CPU
15ident GENERIC
16maxusers 0
17
1037a9ff 18makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
984263bc
MD
19
20options MATH_EMULATE #Support for x87 emulation
21options INET #InterNETworking
22options INET6 #IPv6 communications protocols
23options FFS #Berkeley Fast Filesystem
24options FFS_ROOT #FFS usable as root device [keep this!]
25options SOFTUPDATES #Enable FFS soft updates support
26options UFS_DIRHASH #Improve performance on big directories
27options MFS #Memory Filesystem
28options MD_ROOT #MD is a potential root device
29options NFS #Network Filesystem
30options NFS_ROOT #NFS usable as root device, NFS required
31options MSDOSFS #MSDOS Filesystem
32options CD9660 #ISO 9660 Filesystem
984263bc
MD
33options PROCFS #Process filesystem
34options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
db37e804 35options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
dd5596d6 36options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
fe091cd0
SZ
37options DEVICE_POLLING # Support mixed interrupt-polling
38 # handling of network device drivers
984263bc
MD
39options UCONSOLE #Allow users to grab the console
40options USERCONFIG #boot -c editor
41options VISUAL_USERCONFIG #visual boot -c editor
42options KTRACE #ktrace(1) support
43options SYSVSHM #SYSV-style shared memory
44options SYSVMSG #SYSV-style message queues
45options SYSVSEM #SYSV-style semaphores
46options P1003_1B #Posix P1003_1B real-time extensions
47options _KPOSIX_PRIORITY_SCHEDULING
48options ICMP_BANDLIM #Rate limit bad replies
49options KBD_INSTALL_CDEV # install a CDEV entry in /dev
50options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
51 # output. Adds ~128k to driver.
54ca5b45 52options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
984263bc
MD
53 # output. Adds ~215k to driver.
54
97359a5b
MD
55# To make an SMP kernel both SMP and APIC_IO are usually
56# specified. SMP boxes with severely broken BIOSes which
57# boot fine for non-SMP builds *might* work in SMP mode
58# if you define SMP and leave APIC_IO turned off.
59#
984263bc
MD
60#options SMP # Symmetric MultiProcessor Kernel
61#options APIC_IO # Symmetric (APIC) I/O
62
1037a9ff 63# Debugging for Development
78990d4c 64options DDB
863c2f64 65options DDB_TRACE
78990d4c 66options INVARIANTS
1037a9ff 67
54ca5b45
TS
68# ACPI options
69#options ACPI_QUIRK_VMWARE # VMware's ACPI-fast24 timer is broken
1037a9ff 70
984263bc
MD
71device isa
72device eisa
73device pci
74
75# Floppy drives
76device fdc0 at isa? port IO_FD1 irq 6 drq 2
77device fd0 at fdc0 drive 0
78device fd1 at fdc0 drive 1
79#
80# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
81# don't use the above line for fdc0 but the following one:
82#device fdc0
83
9f97f66c
MD
84# NEW-ATA (NATA) and ATAPI devices
85#
86device nata
87device natadisk # ATA disk drives
88device natapicd # ATAPI CDROM drives
89device natapifd # ATAPI floppy drives
90device natapist # ATAPI tape drives
91device natapicam # Emulate ATAPI devices as SCSI
20ed31d2
SW
92device nataraid # support for ATA software RAID
93 # controllers
94device natausb # ATA-over-USB support
9f97f66c
MD
95options ATA_STATIC_ID # Static device numbering
96options PCI_MAP_FIXUP # Needed for NATA
97
98# LEGACY ATA and ATAPI devices
99#device ata0 at isa? port IO_WD1 irq 14
100#device ata1 at isa? port IO_WD2 irq 15
101#device ata
102#device atadisk # ATA disk drives
103#device atapicd # ATAPI CDROM drives
104#device atapifd # ATAPI floppy drives
105#device atapist # ATAPI tape drives
106#device atapicam # Emulate ATAPI devices as SCSI via CAM
107#options ATA_STATIC_ID #Static device numbering
984263bc
MD
108
109# SCSI Controllers
110device ahb # EISA AHA1742 family
111device ahc # AHA2940 and onboard AIC7xxx devices
112device ahd # AHA39320/29320 and onboard AIC79xx devices
113device amd # AMD 53C974 (Tekram DC-390(T))
114device isp # Qlogic family
115device mpt # LSI-Logic MPT/Fusion
116device ncr # NCR/Symbios Logic
117device sym # NCR/Symbios Logic (newer chipsets)
118options SYM_SETUP_LP_PROBE_MAP=0x40
119 # Allow ncr to attach legacy NCR devices when
120 # both sym and ncr are configured
121
122device adv0 at isa?
123device adw
124device bt0 at isa?
125device aha0 at isa?
126device aic0 at isa?
127
128device ncv # NCR 53C500
129device nsp # Workbit Ninja SCSI-3
130device stg # TMC 18C30/18C50
131
132# SCSI peripherals
133device scbus # SCSI bus (required)
134device da # Direct Access (disks)
135device sa # Sequential Access (tape etc)
136device cd # CD
137device pass # Passthrough device (direct SCSI access)
138
139# RAID controllers interfaced to the SCSI subsystem
140device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
141device dpt # DPT Smartcache - See LINT for options!
142device iir # Intel Integrated RAID
143device mly # Mylex AcceleRAID/eXtremeRAID
144device ciss # Compaq SmartRAID 5* series
145
146# RAID controllers
147device aac # Adaptec FSA RAID, Dell PERC2/PERC3
148#device aacp # SCSI passthrough for aac (requires CAM)
149device ida # Compaq Smart RAID
3b191904 150device ips # IBM ServeRAID
984263bc
MD
151device amr # AMI MegaRAID
152device mlx # Mylex DAC960 family
2d0f6098 153device twe # 3ware Escalade 7000/8000's
ab443496 154device twa # 3ware Escalade 9000's
b7ebf86e 155device pst # Promise Supertrack
984263bc
MD
156
157# atkbdc0 controls both the keyboard and the PS/2 mouse
158device atkbdc0 at isa? port IO_KBD
159device atkbd0 at atkbdc? irq 1 flags 0x1
160device psm0 at atkbdc? irq 12
161
162device vga0 at isa?
163
164# splash screen/screen saver
165pseudo-device splash
166
167# syscons is the default console driver, resembling an SCO console
168device sc0 at isa? flags 0x100
c42bc832 169options SC_PIXEL_MODE # add support for the raster text mode
984263bc 170
984263bc
MD
171device agp # support several AGP chipsets
172
173# Floating point support - do not disable.
174device npx0 at nexus? port IO_NPX irq 13
175
176# Power management support (see LINT for more options)
177device apm0 at nexus? disable flags 0x20 # Advanced Power Management
178
1d03db02
HT
179# HW monitoring devices
180device lm0 at isa? port 0x290
181device it0 at isa? port 0x290
182device it1 at isa? port 0xc00
183device it2 at isa? port 0xd00
184
984263bc 185# PCCARD (PCMCIA) support
666d2603
JS
186device pccard
187device cardbus
188device cbb
984263bc
MD
189
190# Serial (COM) ports
191device sio0 at isa? port IO_COM1 flags 0x10 irq 4
192device sio1 at isa? port IO_COM2 irq 3
193device sio2 at isa? disable port IO_COM3 irq 5
194device sio3 at isa? disable port IO_COM4 irq 9
195
196# Parallel port
197device ppc0 at isa? irq 7
198device ppbus # Parallel port bus (required)
199device lpt # Printer
200device plip # TCP/IP over parallel
201device ppi # Parallel port interface device
202#device vpo # Requires scbus and da
203
204
205# PCI Ethernet NICs.
206device de # DEC/Intel DC21x4x (``Tulip'')
207device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
208device txp # 3Com 3cR990 (``Typhoon'')
209device vx # 3Com 3c590, 3c595 (``Vortex'')
210
211# PCI Ethernet NICs that use the common MII bus controller code.
212# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
213device miibus # MII bus support
43c2aeb0 214device bce # Broadcom NetXtreme II Gigabit Ethernet
7f186839 215device bfe # Broadcom BCM440x 10/100 Ethernet
984263bc 216device dc # DEC/Intel 21143 and various workalikes
d217d4d9 217device et # Agere ET1310 10/100/1000 Ethernet
984263bc
MD
218device fxp # Intel EtherExpress PRO/100B (82557, 82558)
219device pcn # AMD Am79C97x PCI 10/100 NICs
220device rl # RealTek 8129/8139
3e201bae 221device re # RealTek 8139C+/8169
984263bc
MD
222device sf # Adaptec AIC-6915 (``Starfire'')
223device sis # Silicon Integrated Systems SiS 900/SiS 7016
0db5ca13 224device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
984263bc
MD
225device ste # Sundance ST201 (D-Link DFE-550TX)
226device tl # Texas Instruments ThunderLAN
227device tx # SMC EtherPower II (83c170 ``EPIC'')
13bca4c6 228device vge # VIA 612x GigE
984263bc
MD
229device vr # VIA Rhine, Rhine II
230device wb # Winbond W89C840F
231device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
232device bge # Broadcom BCM570x (``Tigon III'')
1da2c9db 233device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
984263bc
MD
234
235# ISA Ethernet NICs.
236# 'device ed' requires 'device miibus'
237device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
238device ex
239device ep
240device fe0 at isa? disable port 0x300
241# Xircom Ethernet
242device xe
841ab66c
SZ
243
244# Wireless NIC cards
245device wlan # 802.11 support
246device wlan_ccmp # 802.11 CCMP support
247device wlan_tkip # 802.11 TKIP support
248device wlan_wep # 802.11 WEP support
428b19ed
SZ
249# 802.11 TX rate control algorithms
250#device wlan_ratectl_amrr # AMRR
251device wlan_ratectl_onoe # Onoe
0dba45fe 252device wlan_ratectl_sample # Sample
ac6da0a9 253
841ab66c 254# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
984263bc
MD
255# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
256# mode (the factory default). If you set the switches on your ISA
257# card for a manually chosen I/O address and IRQ, you must specify
258# those parameters here.
259device an
45e7728a 260device awi # PRISM I IEEE 802.11b wireless NIC
5fdff524 261device ral # Ralink Technology 802.11 wireless NIC
0dba45fe
SZ
262 # Requires wlan_ratectl_onoe and
263 # wlan_ratectl_sample
428b19ed 264device rtw # RealTek 802.11 wireless NIC
2fc6d79d 265 # Requires wlan_ratectl_onoe and wlan_wep
841ab66c
SZ
266# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
267# exists only as a PCMCIA device, so there is no ISA attachment needed
268# and resources will always be dynamically assigned by the pccard code.
269device wi
270
984263bc
MD
271# The probe order of these is presently determined by i386/isa/isa_compat.c.
272device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
273#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
274device lnc0 at isa? disable port 0x280 irq 10 drq 0
275device cs0 at isa? disable port 0x300
276device sn0 at isa? disable port 0x300 irq 10
277
278# Pseudo devices - the number indicates how many units to allocate.
279pseudo-device loop # Network loopback
280pseudo-device ether # Ethernet support
281pseudo-device sl 1 # Kernel SLIP
282pseudo-device ppp 1 # Kernel PPP
283pseudo-device tun # Packet tunnel.
284pseudo-device pty # Pseudo-ttys (telnet etc)
285pseudo-device md # Memory "disks"
286pseudo-device gif # IPv6 and IPv4 tunneling
287pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
288
289# The `bpf' pseudo-device enables the Berkeley Packet Filter.
290# Be aware of the administrative consequences of enabling this!
291pseudo-device bpf #Berkeley packet filter
292
acffed4b
JS
293pseudo-device crypto # core crypto support, used by wlan
294
984263bc
MD
295# USB support
296device uhci # UHCI PCI->USB interface
297device ohci # OHCI PCI->USB interface
298device usb # USB Bus (required)
299device ugen # Generic
300device uhid # "Human Interface Devices"
301device ukbd # Keyboard
302device ulpt # Printer
303device umass # Disks/Mass storage - Requires scbus and da
304device ums # Mouse
305device uscanner # Scanners
306device urio # Diamond Rio MP3 Player
307# USB Ethernet, requires mii
308device aue # ADMtek USB ethernet
204496c7 309device axe # ASIX Electronics USB Ethernet
984263bc
MD
310device cue # CATC USB ethernet
311device kue # Kawasaki LSI USB ethernet
3c374c15 312device rue # RealTek 8150 based USB ethernet
428b19ed
SZ
313# USB wireless NICs, requires wlan, wlan_ratectl_onoe
314device rum # Ralink Technology RT2501USB/RT2601USB
315device ural # Ralink Technology RT2500USB
984263bc
MD
316
317# FireWire support
318device firewire # FireWire bus code
319device sbp # SCSI over FireWire (Requires scbus and da)
320device fwe # Ethernet over FireWire (non-standard!)