FreeBSD -> DragonFly
[dragonfly.git] / etc / defaults / make.conf
CommitLineData
984263bc 1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $
2f62a144 2# $DragonFly: src/etc/defaults/make.conf,v 1.13 2005/06/11 21:09:51 asmodai Exp $
984263bc
MD
3#
4# NOTE: Please would any committer updating this file also update the
5# make.conf(5) manual page, if necessary, which is located in
6# src/share/man/man5/make.conf.5.
7#
8# This file, if present, will be read by make (see /usr/share/mk/sys.mk).
9# It allows you to override macro definitions to make without changing
10# your source tree, or anything the source tree installs.
11#
12# This file must be in valid Makefile syntax.
13#
14# You have to find the things you can put here in the Makefiles and
15# documentation of the source tree.
16#
17#
18# The CPUTYPE variable controls which processor should be targeted for
19# generated code. This controls processor-specific optimizations in
20# certain code (currently only OpenSSL) as well as modifying the value
21# of CFLAGS to contain the appropriate optimization directive to gcc.
22# The automatic setting of CFLAGS may be overridden using the
23# NO_CPU_CFLAGS variable below.
24# Currently the following CPU types are recognized:
25# Intel x86 architecture:
26# (AMD CPUs) k7 k6-2 k6 k5
27# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386
984263bc
MD
28#
29# If you experience any problems after setting this flag, please unset
30# it again before submitting a bug report or attempting to modify code.
31# It may be that certain types of software will become unstable after being
32# compiled with processor-specific (or higher - see below) optimization flags.
33# If in doubt, do not set CPUTYPE or CFLAGS to non-default values.
34#
35#CPUTYPE=i686
36#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically
37#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically
38#
dfa77fe6
MD
39# The CCVER variable controls which GCC-version to use by default. It
40# should be set using ?= so as not to interfere with CCVER overrides from
41# userland or the buildworld. We currently recommend that an override NOT
42# be set in /etc/make.conf and that gcc 3.4 not yet be used to build the boot
43# blocks, boot loader, or the kernel.
44#
d3545314
JR
45# CCVER?=gcc2 # (use GCC 2.95.x, default)
46# CCVER?=gcc34 # (use GCC 3.4, experimental)
dfa77fe6
MD
47#
48#
984263bc
MD
49# CFLAGS controls the compiler settings used when compiling C code.
50# Note that optimization settings above -O (-O2, ...) are not recommended
51# or supported for compiling the world or the kernel - please revert any
52# nonstandard optimization settings to "-O" before submitting bug reports
53# to the developers.
984263bc
MD
54#
55#CFLAGS= -O -pipe
56#
57# CXXFLAGS controls the compiler settings used when compiling C++ code.
58# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish
59# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "="
60# alone will remove the often needed contents of CFLAGS from CXXFLAGS.
61#
62#CXXFLAGS+= -fmemoize-lookups -fsave-memoized
63#
64# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested
65# for use in developing FreeBSD and testing changes. They can be used by
66# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not
67# included here due to compiler bugs, e.g., mkdir()'s mode_t argument.
68#
69BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \
70 -Wcast-qual -Wchar-subscripts -Winline \
71 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
72 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings
73#
74# WARNS_WERROR causes -Werror to be added when WARNS is in effect.
75#
76#WARNS_WERROR= yes
77#
78# To compile just the kernel with special optimizations, you should use
79# this instead of CFLAGS (which is not applicable to kernel builds anyway).
80# There is very little to gain by using higher optimization levels, and doing
81# so can cause problems.
82#
83#COPTFLAGS= -O -pipe
84#
bb4f1f7e
JR
85# Strip the file before installing. Setting this to nothing will keep
86# the debugging symbols in the installed files.
87#STRIP= -s
88#
984263bc
MD
89# Compare before install
90#INSTALL=install -C
91#
92# To enable installing suidperl with the setuid bit turned on
93#ENABLE_SUIDPERL= true
94#
95# To build ppp with normal permissions
96#PPP_NOSUID= true
97#
98# To enable installing ssh(1) with the setuid bit turned on
99#ENABLE_SUID_SSH= true
100#
101# To avoid building various parts of the base system:
102#NO_CVS= true # do not build CVS
103#NO_BIND= true # do not build BIND
104#NO_FORTRAN= true # do not build g77 and related libraries
105#NO_I4B= true # do not build isdn4bsd package
106#NO_IPFILTER= true # do not build IP Filter package
107#NO_LPR= true # do not build lpr and related programs
108#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector
109#NO_MODULES= true # do not build modules with the kernel
110#NO_OBJC= true # do not build Objective C support
111#NO_OPENSSH= true # do not build OpenSSH
112#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH)
2f62a144 113#NO_PKGTOOLS= true # do not build included package tools (for pkgsrc)
984263bc
MD
114#NO_SENDMAIL= true # do not build sendmail and related programs
115#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs
984263bc
MD
116#NO_X= true # do not compile in XWindows support (e.g. doscmd)
117#NOCRYPT= true # do not build any crypto code
118#NOGAMES= true # do not build games (games/ subdir)
119#NOINFO= true # do not make or install info files
120#NOLIBC_R= true # do not build libc_r (re-entrant version of libc)
121#NOMAN= true # do not build manual pages
984263bc 122#NOPROFILE= true # Avoid compiling profiled libraries
984263bc 123#NOSHARE= true # do not go into the share subdir
984263bc
MD
124#
125# To build sys/modules when building the world (our old way of doing things)
126#MODULES_WITH_WORLD=true # do not build modules when building kernel
127#
128# The list of modules to build instead of all of them.
fdd814c0 129#MODULES_OVERRIDE= emulation/linux net/ipfw
984263bc
MD
130#
131# The following controls building optional IDEA code in libcrypto and
132# certain ports. Patents are involved - you must not use this unless
133# you either have a license or fall within patent 'fair use'
134# provisions.
135#
136# *** It is YOUR RESPONSIBILITY to determine if you can use this! ***
137#
138# IDEA is patented in the USA and many European countries - thought to
139# be OK to use for any non-commercial use. This is optional.
140#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption)
141#
142# To avoid running MAKEDEV all on /dev during install:
143#NO_MAKEDEV= true
144#
145# If you do not want unformatted manual pages to be compressed
146# when they are installed:
147#
148#NOMANCOMPRESS= true
149#
150#
151# If you want the "compat" shared libraries installed as part of your normal
152# builds, uncomment these:
153#
154#COMPAT1X= yes
155#COMPAT20= yes
156#COMPAT21= yes
157#COMPAT22= yes
158#COMPAT3X= yes
159#COMPAT4X= yes
160#
161#
162# If you do not want additional documentation (some of which are
163# a few hundred KB's) for ports to be installed:
164#
165#NOPORTDOCS= true
166#
167#
168# Default format for system documentation, depends on your printer.
169# Set this to "ascii" for simple printers or screen
170#
171#PRINTERDEVICE= ps
172#
173#
174# How long to wait for a console keypress before booting the default kernel.
175# This value is approximately in milliseconds. Keypresses are accepted by the
176# BIOS before booting from disk, making it possible to give custom boot
177# parameters even when this is set to 0.
178#
179#BOOTWAIT=0
180#BOOTWAIT=30000
181#
182# By default, the system will always use the keyboard/video card as system
183# console. However, the boot blocks may be dynamically configured to use a
184# serial port in addition to or instead of the keyboard/video console.
185#
186# By default we use COM1 as our serial console port *if* we're going to use
187# a serial port as our console at all. Alter as necessary.
188#
189# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
190#
191#BOOT_COMCONSOLE_PORT= 0x3F8
192#
193# The default serial console speed is 9600. Set the speed to a larger value
194# for better interactive response.
195#
196#BOOT_COMCONSOLE_SPEED= 115200
197#
198# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining
199# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel
200# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet
201# still mount the server's '/' (i.e. rather than load the server's kernel).
202#
203#LOADER_TFTP_SUPPORT= YES
204#
205# By default, the ports collection attempts to use XFree86 4.X. If
206# you are running XFree86 3.3.X, uncomment this line.
207#
208#XFREE86_VERSION= 3
209#
210# By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier.
211# If you have a XFree86 from before 3.0 that has the X distribution in
212# /usr/X386, you want to uncomment this.
213#
214#X11BASE= /usr/X386
215#
216#
217# If you have Motif on your system, uncomment this.
218#
219#HAVE_MOTIF= yes
220#MOTIF_STATIC= yes
221#
222# If the default location of the Motif library (specified below) is NOT
223# appropriate for you, uncomment this and change it to the correct value.
224# If your motif is in ${X11BASE}/lib, you don't need to touch this line.
225#
226#MOTIFLIB= -L${X11BASE}/lib -lXm
227#
228#
229# If you're resident in the USA, this will help various ports to determine
230# whether or not they should attempt to comply with the various U.S.
231# export regulations on certain types of software which do not apply to
232# anyone else in the world.
233#
234#USA_RESIDENT= YES
235#
236#
237# Override "don't install a port that's already installed" behavior.
238# One might wish to do this for ports debugging or to unconditionally
239# reinstall a set of suspect/broken ports.
240#
241#FORCE_PKG_REGISTER= YES
242#
243#
244# If you're behind a firewall and need FTP or HTTP proxy services for
245# ports collection fetching to work, the following examples give the
246# necessary syntax. See the fetch(3) man page for details.
247#
248#FETCH_ENV= FTP_PROXY=ftp://10.0.0.1:21
249#FETCH_ENV= HTTP_PROXY=http://10.0.0.1:80
250#
251#
252# Port master sites.
253#
254# If you want your port fetches to go somewhere else than the default
255# (specified below) in case the distfile/patchfile was not found,
256# uncomment this and change it to a location nearest you. (Don't
257# remove the "/${DIST_SUBDIR}/" part.)
258#
259#MASTER_SITE_BACKUP?= \
260# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
261#
262# If you want your port fetches to check the above site first (before
263# the MASTER_SITES specified in the port Makefiles), uncomment the
264# line below. You can also change the right side to point to wherever
265# you want.
266#
267#MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP}
268#
269# Some ports use a special variable to point to a collection of
270# mirrors of well-known software archives. If you have a mirror close
271# to you, uncomment any of the following lines and change it to that
272# address. (Don't remove the "/%SUBDIR%/" part.)
273#
274# Note: the right hand sides of the following lines are only for your
275# information. For a full list of default sites, take a look at
276# bsd.sites.mk.
277#
278#MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/
279#MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/
280#MASTER_SITE_FREEBSD_ORG= ftp://ftp.FreeBSD.org/pub/FreeBSD/%SUBDIR%/
281#MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/%SUBDIR%/
282#MASTER_SITE_GNU= ftp://ftp.gnu.org/gnu/%SUBDIR%/
283#MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/
284#MASTER_SITE_LOCAL= ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/%SUBDIR%/
285#MASTER_SITE_MOZILLA= ftp://ftp.mozilla.org/pub/%SUBDIR%/
286#MASTER_SITE_NETBSD= ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/%SUBDIR%/
287#MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/
288#MASTER_SITE_PORTS_JP= ftp://ports.jp.FreeBSD.org/pub/FreeBSD-jp/ports-jp/LOCAL_PORTS/%SUBDIR%/
289#MASTER_SITE_RINGSERVER= ftp://ftp.dnsbalance.ring.gr.jp/pub/%SUBDIR%/
290#MASTER_SITE_RUBY= ftp://ftp.ruby-lang.org/pub/ruby/%SUBDIR%/
291#MASTER_SITE_SOURCEFORGE= ftp://ftp2.sourceforge.net/pub/sourceforge/%SUBDIR%/
292#MASTER_SITE_SOURCEWARE= ftp://ftp.freesoftware.com/pub/sourceware/%SUBDIR%/
293#MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/
294#MASTER_SITE_TCLTK= ftp://ftp.scriptics.com/pub/tcl/%SUBDIR%/
295#MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/
296#MASTER_SITE_THEMES= ftp://ftp.themes.org/pub/themes/%SUBDIR%/
297#MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/
298#MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/
299#MASTER_SITE_XEMACS= ftp://ftp.xemacs.org/pub/xemacs/%SUBDIR%/
300#MASTER_SITE_XFREE= ftp://ftp.xfree86.org/pub/XFree86/%SUBDIR%/source/
301#
302# Also it is highly recommended that you configure MASTER_SORT_REGEX
303# to choose better mirror sites for you. List awk(1)-style regular
304# expressions separated by space so MASTER_SITES will be sorted in
305# that order. The following example is for Japanese users; change
306# "jp" part to your ccTLD ("de", "ru", "uk", etc.) or the domain names
307# of your nearest/upstream networks to meet your needs.
308#
309#MASTER_SORT_REGEX?= ://[^/]*\.jp[/.]
310#
311# Ports can place their working directories somewhere other than under
312# /usr/ports.
313#WRKDIRPREFIX= /var/tmp
314#
984263bc
MD
315# Kerberos 5
316# If you want Kerberos 5 (KTH Heimdal), define this:
317#
318#MAKE_KERBEROS5= yes
319#
320# Kerberos 5 su (k5su)
321# If you want to use the k5su utility, define this to have it installed
322# set-user-ID.
323#ENABLE_SUID_K5SU= yes
324#
325#
326# Kerberos5
327# If you want to install MIT Kerberos5 port somewhere other than /usr/local,
328# define this (this is also used to tell ssh1 that kerberos is needed):
329#
330#KRB5_HOME= /usr/local
331#
332#
333# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution
334# file(s) you use on your site (see /usr/share/examples/cvsup/README for more
335# information on CVSup and these files). To use, do "make update" in /usr/src.
336#
337#SUP_UPDATE= yes
338#
339#SUP= /usr/local/bin/cvsup
340#SUPFLAGS= -g -L 2
341#SUPHOST= cvsup.uk.FreeBSD.org
342#SUPFILE= /usr/share/examples/cvsup/stable-supfile
343#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile
344#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile
345#
346# top(1) uses a hash table for the user names. The size of this hash
347# can be tuned to match the number of local users. The table size should
348# be a prime number approximately twice as large as the number of lines in
349# /etc/passwd. The default number is 20011.
350#
351#TOP_TABLE_SIZE= 101
352#
353# Documentation
354#
355# The list of languages and encodings to build and install
356#
357#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R
358#
359#
360# sendmail
361#
362# The following sets the default m4 configuration file to use at
363# install time. Use with caution as a make install will overwrite
364# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now
365# deprecated. The value should be a fully qualified path name.
366# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
367# create /etc/mail/sendmail.cf before installworld installs an
368# updated sendmail binary.
369#
370#SENDMAIL_MC=/etc/mail/myconfig.mc
371#
372# The following sets the default m4 configuration file for mail
373# submission to use at install time. Use with caution as a make
374# install will overwrite any existing /etc/mail/submit.cf. The
375# value should be a fully qualified path name.
376# Avoid using a value of /etc/mail/submit.mc as a buildworld will
377# create /etc/mail/submit.cf before installworld installs an
378# updated sendmail binary.
379#
380#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
381#
382# If you need to build additional .cf files during a make buildworld,
383# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC.
384# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
385# create /etc/mail/sendmail.cf before installworld installs an
386# updated sendmail binary.
387#
388#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc
389#
390# Setting the following variable modifies the flags passed to m4 when
391# building a .cf file from a .mc file. It can be used to enable
392# features disabled by default.
393#
394#SENDMAIL_M4_FLAGS=
395#
396# Setting the following variables modifies the build environment for
397# sendmail and its related utilities. For example, SASL support can be
398# added with settings such as:
399#
400# with SASLv1:
401# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL
402# SENDMAIL_LDFLAGS=-L/usr/local/lib
403# SENDMAIL_LDADD=-lsasl
404#
405# with SASLv2:
406# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
407# SENDMAIL_LDFLAGS=-L/usr/local/lib
408# SENDMAIL_LDADD=-lsasl2
409#
410# Note: If you are using Cyrus SASL with other applications which require
411# access to the sasldb file, you should add the following to your
412# sendmail.mc file:
413#
414# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')
415#
416#SENDMAIL_CFLAGS=
417#SENDMAIL_LDFLAGS=
418#SENDMAIL_LDADD=
419#SENDMAIL_DPADD=
420#
421# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a
422# set-user-ID root binary instead of a set-group-ID smmsp binary and will
423# prevent the installation of /etc/mail/submit.cf.
424# This is a deprecated mode of operation. See etc/mail/README for more
425# information.
426#
427#SENDMAIL_SET_USER_ID=
428#
429# The permissions to use on alias and map databases generated using
430# /etc/mail/Makefile. Defaults to 0640.
431#
432#SENDMAIL_MAP_PERMS=