Add const for argument of argmatch to fix warnings.
[dragonfly.git] / sys / config / GENERIC
CommitLineData
984263bc 1#
8611e04d 2# GENERIC -- Generic kernel configuration file for DragonFly/i386
984263bc 3#
43800c56
HP
4# Check the LINT configuration file in sys/i386/conf, for an
5# exhaustive list of options.
984263bc 6#
3e201bae 7# $DragonFly: src/sys/config/GENERIC,v 1.18 2004/08/03 07:16:14 joerg Exp $
984263bc
MD
8
9machine i386
10cpu I386_CPU
11cpu I486_CPU
12cpu I586_CPU
13cpu I686_CPU
14ident GENERIC
15maxusers 0
16
1037a9ff 17makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
984263bc
MD
18
19options MATH_EMULATE #Support for x87 emulation
20options INET #InterNETworking
21options INET6 #IPv6 communications protocols
22options FFS #Berkeley Fast Filesystem
23options FFS_ROOT #FFS usable as root device [keep this!]
24options SOFTUPDATES #Enable FFS soft updates support
25options UFS_DIRHASH #Improve performance on big directories
26options MFS #Memory Filesystem
27options MD_ROOT #MD is a potential root device
28options NFS #Network Filesystem
29options NFS_ROOT #NFS usable as root device, NFS required
30options MSDOSFS #MSDOS Filesystem
31options CD9660 #ISO 9660 Filesystem
32options CD9660_ROOT #CD-ROM usable as root, CD9660 required
33options PROCFS #Process filesystem
34options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
35options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
36options UCONSOLE #Allow users to grab the console
37options USERCONFIG #boot -c editor
38options VISUAL_USERCONFIG #visual boot -c editor
39options KTRACE #ktrace(1) support
40options SYSVSHM #SYSV-style shared memory
41options SYSVMSG #SYSV-style message queues
42options SYSVSEM #SYSV-style semaphores
43options P1003_1B #Posix P1003_1B real-time extensions
44options _KPOSIX_PRIORITY_SCHEDULING
45options ICMP_BANDLIM #Rate limit bad replies
46options KBD_INSTALL_CDEV # install a CDEV entry in /dev
47options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
48 # output. Adds ~128k to driver.
49options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
50 # output. Adds ~215k to driver.
51
52# To make an SMP kernel, the next two are needed
53#options SMP # Symmetric MultiProcessor Kernel
54#options APIC_IO # Symmetric (APIC) I/O
55
1037a9ff 56# Debugging for Development
78990d4c 57options DDB
863c2f64 58options DDB_TRACE
78990d4c
HP
59options INVARIANTS
60options INVARIANT_SUPPORT
1037a9ff
DR
61
62
63
984263bc
MD
64device isa
65device eisa
66device pci
67
68# Floppy drives
69device fdc0 at isa? port IO_FD1 irq 6 drq 2
70device fd0 at fdc0 drive 0
71device fd1 at fdc0 drive 1
72#
73# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
74# don't use the above line for fdc0 but the following one:
75#device fdc0
76
77# ATA and ATAPI devices
78device ata0 at isa? port IO_WD1 irq 14
79device ata1 at isa? port IO_WD2 irq 15
80device ata
81device atadisk # ATA disk drives
82device atapicd # ATAPI CDROM drives
83device atapifd # ATAPI floppy drives
84device atapist # ATAPI tape drives
a3e4c692 85device atapicam # Emulate ATAPI devices as SCSI via CAM
984263bc
MD
86options ATA_STATIC_ID #Static device numbering
87
88# SCSI Controllers
89device ahb # EISA AHA1742 family
90device ahc # AHA2940 and onboard AIC7xxx devices
91device ahd # AHA39320/29320 and onboard AIC79xx devices
92device amd # AMD 53C974 (Tekram DC-390(T))
93device isp # Qlogic family
94device mpt # LSI-Logic MPT/Fusion
95device ncr # NCR/Symbios Logic
96device sym # NCR/Symbios Logic (newer chipsets)
97options SYM_SETUP_LP_PROBE_MAP=0x40
98 # Allow ncr to attach legacy NCR devices when
99 # both sym and ncr are configured
100
101device adv0 at isa?
102device adw
103device bt0 at isa?
104device aha0 at isa?
105device aic0 at isa?
106
107device ncv # NCR 53C500
108device nsp # Workbit Ninja SCSI-3
109device stg # TMC 18C30/18C50
110
111# SCSI peripherals
112device scbus # SCSI bus (required)
113device da # Direct Access (disks)
114device sa # Sequential Access (tape etc)
115device cd # CD
116device pass # Passthrough device (direct SCSI access)
117
118# RAID controllers interfaced to the SCSI subsystem
119device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
120device dpt # DPT Smartcache - See LINT for options!
121device iir # Intel Integrated RAID
122device mly # Mylex AcceleRAID/eXtremeRAID
123device ciss # Compaq SmartRAID 5* series
124
125# RAID controllers
126device aac # Adaptec FSA RAID, Dell PERC2/PERC3
127#device aacp # SCSI passthrough for aac (requires CAM)
128device ida # Compaq Smart RAID
129device amr # AMI MegaRAID
130device mlx # Mylex DAC960 family
ab443496
DR
131device twe # 3ware Escalade 8000's
132device twa # 3ware Escalade 9000's
b7ebf86e 133device pst # Promise Supertrack
984263bc
MD
134
135# atkbdc0 controls both the keyboard and the PS/2 mouse
136device atkbdc0 at isa? port IO_KBD
137device atkbd0 at atkbdc? irq 1 flags 0x1
138device psm0 at atkbdc? irq 12
139
140device vga0 at isa?
141
142# splash screen/screen saver
143pseudo-device splash
144
145# syscons is the default console driver, resembling an SCO console
146device sc0 at isa? flags 0x100
147
148# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
149#device vt0 at isa?
150#options XSERVER # support for X server on a vt console
151#options FAT_CURSOR # start with block cursor
152# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
153#options PCVT_SCANSET=2 # IBM keyboards are non-std
154
155device agp # support several AGP chipsets
156
157# Floating point support - do not disable.
158device npx0 at nexus? port IO_NPX irq 13
159
160# Power management support (see LINT for more options)
161device apm0 at nexus? disable flags 0x20 # Advanced Power Management
162
163# PCCARD (PCMCIA) support
666d2603
JS
164device pccard
165device cardbus
166device cbb
984263bc
MD
167
168# Serial (COM) ports
169device sio0 at isa? port IO_COM1 flags 0x10 irq 4
170device sio1 at isa? port IO_COM2 irq 3
171device sio2 at isa? disable port IO_COM3 irq 5
172device sio3 at isa? disable port IO_COM4 irq 9
173
174# Parallel port
175device ppc0 at isa? irq 7
176device ppbus # Parallel port bus (required)
177device lpt # Printer
178device plip # TCP/IP over parallel
179device ppi # Parallel port interface device
180#device vpo # Requires scbus and da
181
182
183# PCI Ethernet NICs.
184device de # DEC/Intel DC21x4x (``Tulip'')
185device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
186device txp # 3Com 3cR990 (``Typhoon'')
187device vx # 3Com 3c590, 3c595 (``Vortex'')
188
189# PCI Ethernet NICs that use the common MII bus controller code.
190# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
191device miibus # MII bus support
7f186839 192device bfe # Broadcom BCM440x 10/100 Ethernet
984263bc
MD
193device dc # DEC/Intel 21143 and various workalikes
194device fxp # Intel EtherExpress PRO/100B (82557, 82558)
195device pcn # AMD Am79C97x PCI 10/100 NICs
196device rl # RealTek 8129/8139
3e201bae 197device re # RealTek 8139C+/8169
984263bc
MD
198device sf # Adaptec AIC-6915 (``Starfire'')
199device sis # Silicon Integrated Systems SiS 900/SiS 7016
5e83cc51 200device sk # SysKonnect GEnesis
984263bc
MD
201device ste # Sundance ST201 (D-Link DFE-550TX)
202device tl # Texas Instruments ThunderLAN
203device tx # SMC EtherPower II (83c170 ``EPIC'')
204device vr # VIA Rhine, Rhine II
205device wb # Winbond W89C840F
206device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
207device bge # Broadcom BCM570x (``Tigon III'')
208
209# ISA Ethernet NICs.
210# 'device ed' requires 'device miibus'
211device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
212device ex
213device ep
214device fe0 at isa? disable port 0x300
215# Xircom Ethernet
216device xe
217# PRISM I IEEE 802.11b wireless NIC.
218device awi
219# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
220# exists only as a PCMCIA device, so there is no ISA attachment needed
221# and resources will always be dynamically assigned by the pccard code.
222device wi
223# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
224# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
225# mode (the factory default). If you set the switches on your ISA
226# card for a manually chosen I/O address and IRQ, you must specify
227# those parameters here.
228device an
229# The probe order of these is presently determined by i386/isa/isa_compat.c.
230device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
231#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
232device lnc0 at isa? disable port 0x280 irq 10 drq 0
233device cs0 at isa? disable port 0x300
234device sn0 at isa? disable port 0x300 irq 10
235
236# Pseudo devices - the number indicates how many units to allocate.
237pseudo-device loop # Network loopback
238pseudo-device ether # Ethernet support
239pseudo-device sl 1 # Kernel SLIP
240pseudo-device ppp 1 # Kernel PPP
241pseudo-device tun # Packet tunnel.
242pseudo-device pty # Pseudo-ttys (telnet etc)
243pseudo-device md # Memory "disks"
244pseudo-device gif # IPv6 and IPv4 tunneling
245pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
246
247# The `bpf' pseudo-device enables the Berkeley Packet Filter.
248# Be aware of the administrative consequences of enabling this!
249pseudo-device bpf #Berkeley packet filter
250
251# USB support
252device uhci # UHCI PCI->USB interface
253device ohci # OHCI PCI->USB interface
254device usb # USB Bus (required)
255device ugen # Generic
256device uhid # "Human Interface Devices"
257device ukbd # Keyboard
258device ulpt # Printer
259device umass # Disks/Mass storage - Requires scbus and da
260device ums # Mouse
261device uscanner # Scanners
262device urio # Diamond Rio MP3 Player
263# USB Ethernet, requires mii
264device aue # ADMtek USB ethernet
265device cue # CATC USB ethernet
266device kue # Kawasaki LSI USB ethernet
267
268# FireWire support
269device firewire # FireWire bus code
270device sbp # SCSI over FireWire (Requires scbus and da)
271device fwe # Ethernet over FireWire (non-standard!)