Fix negation handling.
[dragonfly.git] / sys / config / GENERIC
CommitLineData
984263bc 1#
8611e04d 2# GENERIC -- Generic kernel configuration file for DragonFly/i386
984263bc 3#
23e12d00 4# Check the LINT configuration file in sys/config, for an
43800c56 5# exhaustive list of options.
984263bc 6#
54ca5b45 7# $DragonFly: src/sys/config/GENERIC,v 1.47 2007/01/13 21:58:11 tgen Exp $
984263bc 8
a9295349
MD
9machine pc32
10machine_arch i386
984263bc
MD
11cpu I386_CPU
12cpu I486_CPU
13cpu I586_CPU
14cpu I686_CPU
15ident GENERIC
16maxusers 0
17
1037a9ff 18makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
984263bc
MD
19
20options MATH_EMULATE #Support for x87 emulation
21options INET #InterNETworking
22options INET6 #IPv6 communications protocols
23options FFS #Berkeley Fast Filesystem
24options FFS_ROOT #FFS usable as root device [keep this!]
25options SOFTUPDATES #Enable FFS soft updates support
26options UFS_DIRHASH #Improve performance on big directories
27options MFS #Memory Filesystem
28options MD_ROOT #MD is a potential root device
29options NFS #Network Filesystem
30options NFS_ROOT #NFS usable as root device, NFS required
31options MSDOSFS #MSDOS Filesystem
32options CD9660 #ISO 9660 Filesystem
984263bc
MD
33options PROCFS #Process filesystem
34options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
db37e804 35options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
dd5596d6 36options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
fe091cd0
SZ
37options DEVICE_POLLING # Support mixed interrupt-polling
38 # handling of network device drivers
984263bc
MD
39options UCONSOLE #Allow users to grab the console
40options USERCONFIG #boot -c editor
41options VISUAL_USERCONFIG #visual boot -c editor
42options KTRACE #ktrace(1) support
43options SYSVSHM #SYSV-style shared memory
44options SYSVMSG #SYSV-style message queues
45options SYSVSEM #SYSV-style semaphores
46options P1003_1B #Posix P1003_1B real-time extensions
47options _KPOSIX_PRIORITY_SCHEDULING
48options ICMP_BANDLIM #Rate limit bad replies
49options KBD_INSTALL_CDEV # install a CDEV entry in /dev
50options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
51 # output. Adds ~128k to driver.
54ca5b45 52options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
984263bc
MD
53 # output. Adds ~215k to driver.
54
97359a5b
MD
55# To make an SMP kernel both SMP and APIC_IO are usually
56# specified. SMP boxes with severely broken BIOSes which
57# boot fine for non-SMP builds *might* work in SMP mode
58# if you define SMP and leave APIC_IO turned off.
59#
984263bc
MD
60#options SMP # Symmetric MultiProcessor Kernel
61#options APIC_IO # Symmetric (APIC) I/O
62
1037a9ff 63# Debugging for Development
78990d4c 64options DDB
863c2f64 65options DDB_TRACE
78990d4c 66options INVARIANTS
1037a9ff 67
54ca5b45
TS
68# ACPI options
69#options ACPI_QUIRK_VMWARE # VMware's ACPI-fast24 timer is broken
1037a9ff 70
984263bc
MD
71device isa
72device eisa
73device pci
74
75# Floppy drives
76device fdc0 at isa? port IO_FD1 irq 6 drq 2
77device fd0 at fdc0 drive 0
78device fd1 at fdc0 drive 1
79#
80# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
81# don't use the above line for fdc0 but the following one:
82#device fdc0
83
84# ATA and ATAPI devices
85device ata0 at isa? port IO_WD1 irq 14
86device ata1 at isa? port IO_WD2 irq 15
87device ata
88device atadisk # ATA disk drives
89device atapicd # ATAPI CDROM drives
90device atapifd # ATAPI floppy drives
91device atapist # ATAPI tape drives
a3e4c692 92device atapicam # Emulate ATAPI devices as SCSI via CAM
984263bc
MD
93options ATA_STATIC_ID #Static device numbering
94
95# SCSI Controllers
96device ahb # EISA AHA1742 family
97device ahc # AHA2940 and onboard AIC7xxx devices
98device ahd # AHA39320/29320 and onboard AIC79xx devices
99device amd # AMD 53C974 (Tekram DC-390(T))
100device isp # Qlogic family
101device mpt # LSI-Logic MPT/Fusion
102device ncr # NCR/Symbios Logic
103device sym # NCR/Symbios Logic (newer chipsets)
104options SYM_SETUP_LP_PROBE_MAP=0x40
105 # Allow ncr to attach legacy NCR devices when
106 # both sym and ncr are configured
107
108device adv0 at isa?
109device adw
110device bt0 at isa?
111device aha0 at isa?
112device aic0 at isa?
113
114device ncv # NCR 53C500
115device nsp # Workbit Ninja SCSI-3
116device stg # TMC 18C30/18C50
117
118# SCSI peripherals
119device scbus # SCSI bus (required)
120device da # Direct Access (disks)
121device sa # Sequential Access (tape etc)
122device cd # CD
123device pass # Passthrough device (direct SCSI access)
124
125# RAID controllers interfaced to the SCSI subsystem
126device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
127device dpt # DPT Smartcache - See LINT for options!
128device iir # Intel Integrated RAID
129device mly # Mylex AcceleRAID/eXtremeRAID
130device ciss # Compaq SmartRAID 5* series
131
132# RAID controllers
133device aac # Adaptec FSA RAID, Dell PERC2/PERC3
134#device aacp # SCSI passthrough for aac (requires CAM)
135device ida # Compaq Smart RAID
3b191904 136device ips # IBM ServeRAID
984263bc
MD
137device amr # AMI MegaRAID
138device mlx # Mylex DAC960 family
2d0f6098 139device twe # 3ware Escalade 7000/8000's
ab443496 140device twa # 3ware Escalade 9000's
b7ebf86e 141device pst # Promise Supertrack
984263bc
MD
142
143# atkbdc0 controls both the keyboard and the PS/2 mouse
144device atkbdc0 at isa? port IO_KBD
145device atkbd0 at atkbdc? irq 1 flags 0x1
146device psm0 at atkbdc? irq 12
147
148device vga0 at isa?
149
150# splash screen/screen saver
151pseudo-device splash
152
153# syscons is the default console driver, resembling an SCO console
154device sc0 at isa? flags 0x100
c42bc832 155options SC_PIXEL_MODE # add support for the raster text mode
984263bc 156
984263bc
MD
157device agp # support several AGP chipsets
158
159# Floating point support - do not disable.
160device npx0 at nexus? port IO_NPX irq 13
161
162# Power management support (see LINT for more options)
163device apm0 at nexus? disable flags 0x20 # Advanced Power Management
164
165# PCCARD (PCMCIA) support
666d2603
JS
166device pccard
167device cardbus
168device cbb
984263bc
MD
169
170# Serial (COM) ports
171device sio0 at isa? port IO_COM1 flags 0x10 irq 4
172device sio1 at isa? port IO_COM2 irq 3
173device sio2 at isa? disable port IO_COM3 irq 5
174device sio3 at isa? disable port IO_COM4 irq 9
175
176# Parallel port
177device ppc0 at isa? irq 7
178device ppbus # Parallel port bus (required)
179device lpt # Printer
180device plip # TCP/IP over parallel
181device ppi # Parallel port interface device
182#device vpo # Requires scbus and da
183
184
185# PCI Ethernet NICs.
186device de # DEC/Intel DC21x4x (``Tulip'')
187device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
188device txp # 3Com 3cR990 (``Typhoon'')
189device vx # 3Com 3c590, 3c595 (``Vortex'')
190
191# PCI Ethernet NICs that use the common MII bus controller code.
192# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
193device miibus # MII bus support
7f186839 194device bfe # Broadcom BCM440x 10/100 Ethernet
984263bc
MD
195device dc # DEC/Intel 21143 and various workalikes
196device fxp # Intel EtherExpress PRO/100B (82557, 82558)
197device pcn # AMD Am79C97x PCI 10/100 NICs
198device rl # RealTek 8129/8139
3e201bae 199device re # RealTek 8139C+/8169
984263bc
MD
200device sf # Adaptec AIC-6915 (``Starfire'')
201device sis # Silicon Integrated Systems SiS 900/SiS 7016
0db5ca13 202device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
984263bc
MD
203device ste # Sundance ST201 (D-Link DFE-550TX)
204device tl # Texas Instruments ThunderLAN
205device tx # SMC EtherPower II (83c170 ``EPIC'')
13bca4c6 206device vge # VIA 612x GigE
984263bc
MD
207device vr # VIA Rhine, Rhine II
208device wb # Winbond W89C840F
209device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
210device bge # Broadcom BCM570x (``Tigon III'')
1da2c9db 211device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
984263bc
MD
212
213# ISA Ethernet NICs.
214# 'device ed' requires 'device miibus'
215device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
216device ex
217device ep
218device fe0 at isa? disable port 0x300
219# Xircom Ethernet
220device xe
841ab66c
SZ
221
222# Wireless NIC cards
223device wlan # 802.11 support
224device wlan_ccmp # 802.11 CCMP support
225device wlan_tkip # 802.11 TKIP support
226device wlan_wep # 802.11 WEP support
428b19ed
SZ
227# 802.11 TX rate control algorithms
228#device wlan_ratectl_amrr # AMRR
229device wlan_ratectl_onoe # Onoe
ac6da0a9 230
841ab66c 231# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
984263bc
MD
232# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
233# mode (the factory default). If you set the switches on your ISA
234# card for a manually chosen I/O address and IRQ, you must specify
235# those parameters here.
236device an
45e7728a 237device awi # PRISM I IEEE 802.11b wireless NIC
5fdff524 238device ral # Ralink Technology 802.11 wireless NIC
428b19ed 239device rtw # RealTek 802.11 wireless NIC
2fc6d79d 240 # Requires wlan_ratectl_onoe and wlan_wep
841ab66c
SZ
241# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
242# exists only as a PCMCIA device, so there is no ISA attachment needed
243# and resources will always be dynamically assigned by the pccard code.
244device wi
245
984263bc
MD
246# The probe order of these is presently determined by i386/isa/isa_compat.c.
247device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
248#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
249device lnc0 at isa? disable port 0x280 irq 10 drq 0
250device cs0 at isa? disable port 0x300
251device sn0 at isa? disable port 0x300 irq 10
252
253# Pseudo devices - the number indicates how many units to allocate.
254pseudo-device loop # Network loopback
255pseudo-device ether # Ethernet support
256pseudo-device sl 1 # Kernel SLIP
257pseudo-device ppp 1 # Kernel PPP
258pseudo-device tun # Packet tunnel.
259pseudo-device pty # Pseudo-ttys (telnet etc)
260pseudo-device md # Memory "disks"
261pseudo-device gif # IPv6 and IPv4 tunneling
262pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
263
264# The `bpf' pseudo-device enables the Berkeley Packet Filter.
265# Be aware of the administrative consequences of enabling this!
266pseudo-device bpf #Berkeley packet filter
267
acffed4b
JS
268pseudo-device crypto # core crypto support, used by wlan
269
984263bc
MD
270# USB support
271device uhci # UHCI PCI->USB interface
272device ohci # OHCI PCI->USB interface
273device usb # USB Bus (required)
274device ugen # Generic
275device uhid # "Human Interface Devices"
276device ukbd # Keyboard
277device ulpt # Printer
278device umass # Disks/Mass storage - Requires scbus and da
279device ums # Mouse
280device uscanner # Scanners
281device urio # Diamond Rio MP3 Player
282# USB Ethernet, requires mii
283device aue # ADMtek USB ethernet
204496c7 284device axe # ASIX Electronics USB Ethernet
984263bc
MD
285device cue # CATC USB ethernet
286device kue # Kawasaki LSI USB ethernet
3c374c15 287device rue # RealTek 8150 based USB ethernet
428b19ed
SZ
288# USB wireless NICs, requires wlan, wlan_ratectl_onoe
289device rum # Ralink Technology RT2501USB/RT2601USB
290device ural # Ralink Technology RT2500USB
984263bc
MD
291
292# FireWire support
293device firewire # FireWire bus code
294device sbp # SCSI over FireWire (Requires scbus and da)
295device fwe # Ethernet over FireWire (non-standard!)