projects / dragonfly.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | history | HEAD
kernel/cam: Make si_iosize_max overridable by drivers.
[dragonfly.git] / sys / bus / cam / cam_ccb.h
CommitLineData
984263bc
MD		 1/*
2 * Data structures and definitions for CAM Control Blocks (CCBs).
3 *
4 * Copyright (c) 1997, 1998 Justin T. Gibbs.
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification, immediately at the beginning of the file.
13 * 2. The name of the author may not be used to endorse or promote products
14 * derived from this software without specific prior written permission.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
20 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 * SUCH DAMAGE.
27 *
62ade751 28 * $FreeBSD: src/sys/cam/cam_ccb.h,v 1.15.2.3 2003/07/29 04:00:34 njl Exp $
984263bc
MD		 29 */
30
31#ifndef _CAM_CAM_CCB_H
32#define _CAM_CAM_CCB_H 1
33
34#include <sys/queue.h>
35#include <sys/cdefs.h>
36#include <sys/time.h>
b05e84c9 37#include <machine/limits.h>
984263bc 38#include <sys/callout.h>
1f2de5d4
MD		 39#include "cam_debug.h"
40#include "scsi/scsi_all.h"
984263bc
MD		 41
42
43/* General allocation length definitions for CCB structures */
44#define IOCDBLEN CAM_MAX_CDBLEN /* Space for CDB bytes/pointer */
45#define VUHBALEN 14 /* Vendor Unique HBA length */
46#define SIM_IDLEN 16 /* ASCII string len for SIM ID */
47#define HBA_IDLEN 16 /* ASCII string len for HBA ID */
48#define DEV_IDLEN 16 /* ASCII string len for device names */
49#define CCB_PERIPH_PRIV_SIZE 2 /* size of peripheral private area */
50#define CCB_SIM_PRIV_SIZE 2 /* size of sim private area */
51
52/* Struct definitions for CAM control blocks */
53
54/* Common CCB header */
55/* CAM CCB flags */
56typedef enum {
57 CAM_CDB_POINTER = 0x00000001,/* The CDB field is a pointer */
58 CAM_QUEUE_ENABLE = 0x00000002,/* SIM queue actions are enabled */
59 CAM_CDB_LINKED = 0x00000004,/* CCB contains a linked CDB */
60 CAM_NEGOTIATE = 0x00000008,/*
61 * Perform transport negotiation
62 * with this command.
63 */
64 CAM_SCATTER_VALID = 0x00000010,/* Scatter/gather list is valid */
65 CAM_DIS_AUTOSENSE = 0x00000020,/* Disable autosense feature */
66 CAM_DIR_RESV = 0x00000000,/* Data direction (00:reserved) */
67 CAM_DIR_IN = 0x00000040,/* Data direction (01:DATA IN) */
68 CAM_DIR_OUT = 0x00000080,/* Data direction (10:DATA OUT) */
69 CAM_DIR_NONE = 0x000000C0,/* Data direction (11:no data) */
70 CAM_DIR_MASK = 0x000000C0,/* Data direction Mask */
71 CAM_SOFT_RST_OP = 0x00000100,/* Use Soft reset alternative */
72 CAM_ENG_SYNC = 0x00000200,/* Flush resid bytes on complete */
73 CAM_DEV_QFRZDIS = 0x00000400,/* Disable DEV Q freezing */
74 CAM_DEV_QFREEZE = 0x00000800,/* Freeze DEV Q on execution */
75 CAM_HIGH_POWER = 0x00001000,/* Command takes a lot of power */
76 CAM_SENSE_PTR = 0x00002000,/* Sense data is a pointer */
77 CAM_SENSE_PHYS = 0x00004000,/* Sense pointer is physical addr*/
78 CAM_TAG_ACTION_VALID = 0x00008000,/* Use the tag action in this ccb*/
79 CAM_PASS_ERR_RECOVER = 0x00010000,/* Pass driver does err. recovery*/
80 CAM_DIS_DISCONNECT = 0x00020000,/* Disable disconnect */
81 CAM_SG_LIST_PHYS = 0x00040000,/* SG list has physical addrs. */
0b0362e1
MD		 82 CAM_POLLED = 0x00080000,/* Requested that polling be used*/
83 CAM_UNUSED100000 = 0x00100000,
984263bc
MD		 84 CAM_DATA_PHYS = 0x00200000,/* SG/Buffer data ptrs are phys. */
85 CAM_CDB_PHYS = 0x00400000,/* CDB poiner is physical */
86 CAM_ENG_SGLIST = 0x00800000,/* SG list is for the HBA engine */
87
88/* Phase cognizant mode flags */
89 CAM_DIS_AUTOSRP = 0x01000000,/* Disable autosave/restore ptrs */
90 CAM_DIS_AUTODISC = 0x02000000,/* Disable auto disconnect */
91 CAM_TGT_CCB_AVAIL = 0x04000000,/* Target CCB available */
92 CAM_TGT_PHASE_MODE = 0x08000000,/* The SIM runs in phase mode */
93 CAM_MSGB_VALID = 0x10000000,/* Message buffer valid */
94 CAM_STATUS_VALID = 0x20000000,/* Status buffer valid */
95 CAM_DATAB_VALID = 0x40000000,/* Data buffer valid */
96
97/* Host target Mode flags */
98 CAM_SEND_SENSE = 0x08000000,/* Send sense data with status */
99 CAM_TERM_IO = 0x10000000,/* Terminate I/O Message sup. */
100 CAM_DISCONNECT = 0x20000000,/* Disconnects are mandatory */
101 CAM_SEND_STATUS = 0x40000000 /* Send status after data phase */
102} ccb_flags;
103
104/* XPT Opcodes for xpt_action */
105typedef enum {
106/* Function code flags are bits greater than 0xff */
107 XPT_FC_QUEUED = 0x100,
108 /* Non-immediate function code */
109 XPT_FC_USER_CCB = 0x200,
110 XPT_FC_XPT_ONLY = 0x400,
111 /* Only for the transport layer device */
112 XPT_FC_DEV_QUEUED = 0x800 | XPT_FC_QUEUED,
113 /* Passes through the device queues */
114/* Common function commands: 0x00->0x0F */
115 XPT_NOOP = 0x00,
116 /* Execute Nothing */
117 XPT_SCSI_IO = 0x01 | XPT_FC_DEV_QUEUED,
118 /* Execute the requested I/O operation */
119 XPT_GDEV_TYPE = 0x02,
120 /* Get type information for specified device */
121 XPT_GDEVLIST = 0x03,
122 /* Get a list of peripheral devices */
123 XPT_PATH_INQ = 0x04,
124 /* Path routing inquiry */
125 XPT_REL_SIMQ = 0x05,
126 /* Release a frozen SIM queue */
127 XPT_SASYNC_CB = 0x06,
128 /* Set Asynchronous Callback Parameters */
129 XPT_SDEV_TYPE = 0x07,
130 /* Set device type information */
131 XPT_SCAN_BUS = 0x08 | XPT_FC_QUEUED | XPT_FC_USER_CCB
132 | XPT_FC_XPT_ONLY,
133 /* (Re)Scan the SCSI Bus */
134 XPT_DEV_MATCH = 0x09 | XPT_FC_XPT_ONLY,
135 /* Get EDT entries matching the given pattern */
136 XPT_DEBUG = 0x0a,
137 /* Turn on debugging for a bus, target or lun */
138 XPT_PATH_STATS = 0x0b,
139 /* Path statistics (error counts, etc.) */
140 XPT_GDEV_STATS = 0x0c,
141 /* Device statistics (error counts, etc.) */
142/* SCSI Control Functions: 0x10->0x1F */
143 XPT_ABORT = 0x10,
144 /* Abort the specified CCB */
145 XPT_RESET_BUS = 0x11 | XPT_FC_XPT_ONLY,
146 /* Reset the specified SCSI bus */
147 XPT_RESET_DEV = 0x12 | XPT_FC_DEV_QUEUED,
148 /* Bus Device Reset the specified SCSI device */
149 XPT_TERM_IO = 0x13,
150 /* Terminate the I/O process */
151 XPT_SCAN_LUN = 0x14 | XPT_FC_QUEUED | XPT_FC_USER_CCB
152 | XPT_FC_XPT_ONLY,
153 /* Scan Logical Unit */
154 XPT_GET_TRAN_SETTINGS = 0x15,
155 /*
156 * Get default/user transfer settings
157 * for the target
158 */
159 XPT_SET_TRAN_SETTINGS = 0x16,
160 /*
161 * Set transfer rate/width
162 * negotiation settings
163 */
164 XPT_CALC_GEOMETRY = 0x17,
165 /*
166 * Calculate the geometry parameters for
167 * a device give the sector size and
168 * volume size.
169 */
170
171/* HBA engine commands 0x20->0x2F */
172 XPT_ENG_INQ = 0x20 | XPT_FC_XPT_ONLY,
173 /* HBA engine feature inquiry */
b05e84c9 174 XPT_ENG_EXEC = 0x21 | XPT_FC_DEV_QUEUED,
984263bc
MD		 175 /* HBA execute engine request */
176
177/* Target mode commands: 0x30->0x3F */
178 XPT_EN_LUN = 0x30,
179 /* Enable LUN as a target */
180 XPT_TARGET_IO = 0x31 | XPT_FC_DEV_QUEUED,
181 /* Execute target I/O request */
182 XPT_ACCEPT_TARGET_IO = 0x32 | XPT_FC_QUEUED | XPT_FC_USER_CCB,
183 /* Accept Host Target Mode CDB */
184 XPT_CONT_TARGET_IO = 0x33 | XPT_FC_DEV_QUEUED,
185 /* Continue Host Target I/O Connection */
186 XPT_IMMED_NOTIFY = 0x34 | XPT_FC_QUEUED | XPT_FC_USER_CCB,
187 /* Notify Host Target driver of event */
188 XPT_NOTIFY_ACK = 0x35,
189 /* Acknowledgement of event */
e0fb398b
T		 190 XPT_TRIM = 0x36 | XPT_FC_DEV_QUEUED,
191 /* TRIM */
984263bc
MD		 192
193/* Vendor Unique codes: 0x80->0x8F */
194 XPT_VUNIQUE = 0x80
195} xpt_opcode;
196
197#define XPT_FC_GROUP_MASK 0xF0
198#define XPT_FC_GROUP(op) ((op) & XPT_FC_GROUP_MASK)
199#define XPT_FC_GROUP_COMMON 0x00
200#define XPT_FC_GROUP_SCSI_CONTROL 0x10
201#define XPT_FC_GROUP_HBA_ENGINE 0x20
202#define XPT_FC_GROUP_TMODE 0x30
203#define XPT_FC_GROUP_VENDOR_UNIQUE 0x80
204
205#define XPT_FC_IS_DEV_QUEUED(ccb) \
206 (((ccb)->ccb_h.func_code & XPT_FC_DEV_QUEUED) == XPT_FC_DEV_QUEUED)
207#define XPT_FC_IS_QUEUED(ccb) \
208 (((ccb)->ccb_h.func_code & XPT_FC_QUEUED) != 0)
b05e84c9 209
b05e84c9
PA		 210typedef enum {
211 PROTO_UNKNOWN,
212 PROTO_UNSPECIFIED,
213 PROTO_SCSI, /* Small Computer System Interface */
214 PROTO_ATA, /* AT Attachment */
215 PROTO_ATAPI, /* AT Attachment Packetized Interface */
216} cam_proto;
217
218typedef enum {
219 XPORT_UNKNOWN,
220 XPORT_UNSPECIFIED,
221 XPORT_SPI, /* SCSI Parallel Interface */
222 XPORT_FC, /* Fiber Channel */
223 XPORT_SSA, /* Serial Storage Architecture */
224 XPORT_USB, /* Universal Serial Bus */
225 XPORT_PPB, /* Parallel Port Bus */
2306276c
PA		 226 XPORT_ATA, /* AT Attachment */
227 XPORT_SAS, /* Serial Attached SCSI */
aa8dd6f8 228 XPORT_SATA, /* SATA Attachment */
b05e84c9
PA		 229} cam_xport;
230
231#define PROTO_VERSION_UNKNOWN (UINT_MAX - 1)
232#define PROTO_VERSION_UNSPECIFIED UINT_MAX
233#define XPORT_VERSION_UNKNOWN (UINT_MAX - 1)
234#define XPORT_VERSION_UNSPECIFIED UINT_MAX
b05e84c9 235
984263bc
MD		 236typedef union {
237 LIST_ENTRY(ccb_hdr) le;
238 SLIST_ENTRY(ccb_hdr) sle;
239 TAILQ_ENTRY(ccb_hdr) tqe;
240 STAILQ_ENTRY(ccb_hdr) stqe;
241} camq_entry;
242
243typedef union {
244 void *ptr;
245 u_long field;
246 u_int8_t bytes[sizeof(void *) > sizeof(u_long)
247 ? sizeof(void *) : sizeof(u_long)];
248} ccb_priv_entry;
249
250typedef union {
251 ccb_priv_entry entries[CCB_PERIPH_PRIV_SIZE];
252 u_int8_t bytes[CCB_PERIPH_PRIV_SIZE * sizeof(ccb_priv_entry)];
253} ccb_ppriv_area;
254
255typedef union {
256 ccb_priv_entry entries[CCB_SIM_PRIV_SIZE];
257 u_int8_t bytes[CCB_SIM_PRIV_SIZE * sizeof(ccb_priv_entry)];
258} ccb_spriv_area;
259
260struct ccb_hdr {
bab7c15c 261 cam_pinfo pinfo; /* Info for priority scheduling */
984263bc
MD		 262 camq_entry xpt_links; /* For chaining in the XPT layer */
263 camq_entry sim_links; /* For chaining in the SIM layer */
bab7c15c 264 camq_entry periph_links; /* For chaining in the type driver */
984263bc 265 u_int32_t retry_count;
984263bc 266 void (*cbfcnp)(struct cam_periph *, union ccb *);
bab7c15c 267 /* Callback on completion function */
984263bc 268 xpt_opcode func_code; /* XPT function code */
bab7c15c
PA		 269 u_int32_t status; /* Status returned by CAM subsystem */
270 struct cam_path *path; /* Compiled path for this ccb */
984263bc
MD		 271 path_id_t path_id; /* Path ID for the request */
272 target_id_t target_id; /* Target device ID */
273 lun_id_t target_lun; /* Target LUN number */
bab7c15c 274 u_int32_t flags; /* ccb_flags */
984263bc
MD		 275 ccb_ppriv_area periph_priv;
276 ccb_spriv_area sim_priv;
277 u_int32_t timeout; /* Timeout value */
ddcafce9 278 struct callout timeout_ch;
bab7c15c 279 /* Callout handle used for timeouts */
984263bc
MD		 280};
281
282/* Get Device Information CCB */
283struct ccb_getdev {
284 struct ccb_hdr ccb_h;
285 struct scsi_inquiry_data inq_data;
286 u_int8_t serial_num[252];
b05e84c9 287 u_int8_t reserved;
984263bc
MD		 288 u_int8_t serial_num_len;
289};
290
291/* Device Statistics CCB */
292struct ccb_getdevstats {
293 struct ccb_hdr ccb_h;
294 int dev_openings; /* Space left for more work on device*/
295 int dev_active; /* Transactions running on the device */
296 int devq_openings; /* Space left for more queued work */
297 int devq_queued; /* Transactions queued to be sent */
298 int held; /*
299 * CCBs held by peripheral drivers
300 * for this device
301 */
302 int maxtags; /*
303 * Boundary conditions for number of
304 * tagged operations
305 */
306 int mintags;
88c4d2f6 307 struct timeval last_reset; /* Uptime of last bus reset/loop init */
984263bc
MD		 308};
309
310typedef enum {
311 CAM_GDEVLIST_LAST_DEVICE,
312 CAM_GDEVLIST_LIST_CHANGED,
313 CAM_GDEVLIST_MORE_DEVS,
314 CAM_GDEVLIST_ERROR
315} ccb_getdevlist_status_e;
316
317struct ccb_getdevlist {
318 struct ccb_hdr ccb_h;
319 char periph_name[DEV_IDLEN];
320 u_int32_t unit_number;
321 unsigned int generation;
322 u_int32_t index;
323 ccb_getdevlist_status_e status;
324};
325
326typedef enum {
327 PERIPH_MATCH_NONE = 0x000,
328 PERIPH_MATCH_PATH = 0x001,
329 PERIPH_MATCH_TARGET = 0x002,
330 PERIPH_MATCH_LUN = 0x004,
331 PERIPH_MATCH_NAME = 0x008,
332 PERIPH_MATCH_UNIT = 0x010,
333 PERIPH_MATCH_ANY = 0x01f
334} periph_pattern_flags;
335
336struct periph_match_pattern {
337 char periph_name[DEV_IDLEN];
338 u_int32_t unit_number;
339 path_id_t path_id;
340 target_id_t target_id;
341 lun_id_t target_lun;
342 periph_pattern_flags flags;
343};
344
345typedef enum {
346 DEV_MATCH_NONE = 0x000,
347 DEV_MATCH_PATH = 0x001,
348 DEV_MATCH_TARGET = 0x002,
349 DEV_MATCH_LUN = 0x004,
350 DEV_MATCH_INQUIRY = 0x008,
351 DEV_MATCH_ANY = 0x00f
352} dev_pattern_flags;
353
354struct device_match_pattern {
355 path_id_t path_id;
356 target_id_t target_id;
357 lun_id_t target_lun;
358 struct scsi_static_inquiry_pattern inq_pat;
359 dev_pattern_flags flags;
360};
361
362typedef enum {
363 BUS_MATCH_NONE = 0x000,
364 BUS_MATCH_PATH = 0x001,
365 BUS_MATCH_NAME = 0x002,
366 BUS_MATCH_UNIT = 0x004,
367 BUS_MATCH_BUS_ID = 0x008,
368 BUS_MATCH_ANY = 0x00f
369} bus_pattern_flags;
370
371struct bus_match_pattern {
372 path_id_t path_id;
373 char dev_name[DEV_IDLEN];
374 u_int32_t unit_number;
375 u_int32_t bus_id;
376 bus_pattern_flags flags;
377};
378
379union match_pattern {
380 struct periph_match_pattern periph_pattern;
381 struct device_match_pattern device_pattern;
382 struct bus_match_pattern bus_pattern;
383};
384
385typedef enum {
386 DEV_MATCH_PERIPH,
387 DEV_MATCH_DEVICE,
388 DEV_MATCH_BUS
389} dev_match_type;
390
391struct dev_match_pattern {
392 dev_match_type type;
393 union match_pattern pattern;
394};
395
396struct periph_match_result {
397 char periph_name[DEV_IDLEN];
398 u_int32_t unit_number;
399 path_id_t path_id;
400 target_id_t target_id;
401 lun_id_t target_lun;
402};
403
404typedef enum {
405 DEV_RESULT_NOFLAG = 0x00,
406 DEV_RESULT_UNCONFIGURED = 0x01
407} dev_result_flags;
408
409struct device_match_result {
410 path_id_t path_id;
411 target_id_t target_id;
412 lun_id_t target_lun;
413 struct scsi_inquiry_data inq_data;
414 dev_result_flags flags;
415};
416
417struct bus_match_result {
418 path_id_t path_id;
419 char dev_name[DEV_IDLEN];
420 u_int32_t unit_number;
421 u_int32_t bus_id;
422};
423
424union match_result {
425 struct periph_match_result periph_result;
426 struct device_match_result device_result;
427 struct bus_match_result bus_result;
428};
429
430struct dev_match_result {
431 dev_match_type type;
432 union match_result result;
433};
434
435typedef enum {
436 CAM_DEV_MATCH_LAST,
437 CAM_DEV_MATCH_MORE,
438 CAM_DEV_MATCH_LIST_CHANGED,
439 CAM_DEV_MATCH_SIZE_ERROR,
440 CAM_DEV_MATCH_ERROR
441} ccb_dev_match_status;
442
443typedef enum {
444 CAM_DEV_POS_NONE = 0x000,
445 CAM_DEV_POS_BUS = 0x001,
446 CAM_DEV_POS_TARGET = 0x002,
447 CAM_DEV_POS_DEVICE = 0x004,
448 CAM_DEV_POS_PERIPH = 0x008,
449 CAM_DEV_POS_PDPTR = 0x010,
450 CAM_DEV_POS_TYPEMASK = 0xf00,
451 CAM_DEV_POS_EDT = 0x100,
452 CAM_DEV_POS_PDRV = 0x200
453} dev_pos_type;
454
455struct ccb_dm_cookie {
456 void *bus;
457 void *target;
458 void *device;
459 void *periph;
460 void *pdrv;
461};
462
463struct ccb_dev_position {
464 u_int generations[4];
465#define CAM_BUS_GENERATION 0x00
466#define CAM_TARGET_GENERATION 0x01
467#define CAM_DEV_GENERATION 0x02
468#define CAM_PERIPH_GENERATION 0x03
469 dev_pos_type position_type;
470 struct ccb_dm_cookie cookie;
471};
472
473struct ccb_dev_match {
474 struct ccb_hdr ccb_h;
475 ccb_dev_match_status status;
476 u_int32_t num_patterns;
477 u_int32_t pattern_buf_len;
478 struct dev_match_pattern *patterns;
479 u_int32_t num_matches;
480 u_int32_t match_buf_len;
481 struct dev_match_result *matches;
482 struct ccb_dev_position pos;
483};
484
485/*
486 * Definitions for the path inquiry CCB fields.
487 */
bdd58e03 488#define CAM_VERSION 0x15 /* Hex value for current version */
984263bc
MD		 489
490typedef enum {
491 PI_MDP_ABLE = 0x80, /* Supports MDP message */
492 PI_WIDE_32 = 0x40, /* Supports 32 bit wide SCSI */
493 PI_WIDE_16 = 0x20, /* Supports 16 bit wide SCSI */
494 PI_SDTR_ABLE = 0x10, /* Supports SDTR message */
495 PI_LINKED_CDB = 0x08, /* Supports linked CDBs */
496 PI_TAG_ABLE = 0x02, /* Supports tag queue messages */
497 PI_SOFT_RST = 0x01 /* Supports soft reset alternative */
498} pi_inqflag;
499
500typedef enum {
501 PIT_PROCESSOR = 0x80, /* Target mode processor mode */
502 PIT_PHASE = 0x40, /* Target mode phase cog. mode */
503 PIT_DISCONNECT = 0x20, /* Disconnects supported in target mode */
504 PIT_TERM_IO = 0x10, /* Terminate I/O message supported in TM */
505 PIT_GRP_6 = 0x08, /* Group 6 commands supported */
506 PIT_GRP_7 = 0x04 /* Group 7 commands supported */
507} pi_tmflag;
508
509typedef enum {
510 PIM_SCANHILO = 0x80, /* Bus scans from high ID to low ID */
511 PIM_NOREMOVE = 0x40, /* Removeable devices not included in scan */
512 PIM_NOINITIATOR = 0x20, /* Initiator role not supported. */
62ade751 513 PIM_NOBUSRESET = 0x10, /* User has disabled initial BUS RESET */
096db8d6
PA		 514 PIM_NO_6_BYTE = 0x08, /* Do not send 6-byte commands */
515 PIM_SEQSCAN = 0x04 /* Do bus scans sequentially, not in parallel */
984263bc
MD		 516} pi_miscflag;
517
518/* Path Inquiry CCB */
b05e84c9
PA		 519struct ccb_pathinq_settings_spi {
520 u_int8_t ppr_options;
521};
ff83d1fa
PA		 522struct ccb_pathinq_settings_fc {
523 u_int64_t wwnn; /* world wide node name */
524 u_int64_t wwpn; /* world wide port name */
525 u_int32_t port; /* 24 bit port id, if known */
526 u_int32_t bitrate; /* Mbps */
527};
2306276c
PA		 528struct ccb_pathinq_settings_sas {
529 u_int32_t bitrate; /* Mbps */
530};
ff83d1fa 531#define PATHINQ_SETTINGS_SIZE 128
b05e84c9 532
984263bc
MD		 533struct ccb_pathinq {
534 struct ccb_hdr ccb_h;
535 u_int8_t version_num; /* Version number for the SIM/HBA */
536 u_int8_t hba_inquiry; /* Mimic of INQ byte 7 for the HBA */
537 u_int8_t target_sprt; /* Flags for target mode support */
538 u_int8_t hba_misc; /* Misc HBA features */
539 u_int16_t hba_eng_cnt; /* HBA engine count */
540 /* Vendor Unique capabilities */
541 u_int8_t vuhba_flags[VUHBALEN];
542 u_int32_t max_target; /* Maximum supported Target */
543 u_int32_t max_lun; /* Maximum supported Lun */
544 u_int32_t async_flags; /* Installed Async handlers */
545 path_id_t hpath_id; /* Highest Path ID in the subsystem */
546 target_id_t initiator_id; /* ID of the HBA on the SCSI bus */
547 char sim_vid[SIM_IDLEN]; /* Vendor ID of the SIM */
548 char hba_vid[HBA_IDLEN]; /* Vendor ID of the HBA */
549 char dev_name[DEV_IDLEN];/* Device name for SIM */
550 u_int32_t unit_number; /* Unit number for SIM */
551 u_int32_t bus_id; /* Bus ID for SIM */
552 u_int32_t base_transfer_speed;/* Base bus speed in KB/sec */
b05e84c9
PA		 553 cam_proto protocol;
554 u_int protocol_version;
555 cam_xport transport;
556 u_int transport_version;
557 union {
558 struct ccb_pathinq_settings_spi spi;
ff83d1fa 559 struct ccb_pathinq_settings_fc fc;
2306276c 560 struct ccb_pathinq_settings_sas sas;
ff83d1fa 561 char ccb_pathinq_settings_opaque[PATHINQ_SETTINGS_SIZE];
b05e84c9 562 } xport_specific;
61fe6a46 563 u_int maxio; /* Max supported I/O size, in bytes. */
984263bc
MD		 564};
565
566/* Path Statistics CCB */
567struct ccb_pathstats {
568 struct ccb_hdr ccb_h;
88c4d2f6 569 struct timeval last_reset; /* Uptime of last bus reset/loop init */
984263bc
MD		 570};
571
572typedef union {
573 u_int8_t *sense_ptr; /*
574 * Pointer to storage
575 * for sense information
576 */
577 /* Storage Area for sense information */
578 struct scsi_sense_data sense_buf;
579} sense_t;
580
581typedef union {
582 u_int8_t *cdb_ptr; /* Pointer to the CDB bytes to send */
583 /* Area for the CDB send */
584 u_int8_t cdb_bytes[IOCDBLEN];
585} cdb_t;
586
587/*
588 * SCSI I/O Request CCB used for the XPT_SCSI_IO and XPT_CONT_TARGET_IO
589 * function codes.
590 */
591struct ccb_scsiio {
592 struct ccb_hdr ccb_h;
593 union ccb *next_ccb; /* Ptr for next CCB for action */
594 u_int8_t *req_map; /* Ptr to mapping info */
595 u_int8_t *data_ptr; /* Ptr to the data buf/SG list */
596 u_int32_t dxfer_len; /* Data transfer length */
597 /* Autosense storage */
598 struct scsi_sense_data sense_data;
599 u_int8_t sense_len; /* Number of bytes to autosense */
600 u_int8_t cdb_len; /* Number of bytes for the CDB */
601 u_int16_t sglist_cnt; /* Number of SG list entries */
602 u_int8_t scsi_status; /* Returned SCSI status */
603 u_int8_t sense_resid; /* Autosense resid length: 2's comp */
604 u_int32_t resid; /* Transfer residual length: 2's comp */
605 cdb_t cdb_io; /* Union for CDB bytes/pointer */
606 u_int8_t *msg_ptr; /* Pointer to the message buffer */
607 u_int16_t msg_len; /* Number of bytes for the Message */
608 u_int8_t tag_action; /* What to do for tag queueing */
609 /*
610 * The tag action should be either the define below (to send a
611 * non-tagged transaction) or one of the defined scsi tag messages
612 * from scsi_message.h.
613 */
614#define CAM_TAG_ACTION_NONE 0x00
615 u_int tag_id; /* tag id from initator (target mode) */
616 u_int init_id; /* initiator id of who selected */
617};
618
619struct ccb_accept_tio {
620 struct ccb_hdr ccb_h;
621 cdb_t cdb_io; /* Union for CDB bytes/pointer */
622 u_int8_t cdb_len; /* Number of bytes for the CDB */
623 u_int8_t tag_action; /* What to do for tag queueing */
624 u_int8_t sense_len; /* Number of bytes of Sense Data */
625 u_int tag_id; /* tag id from initator (target mode) */
626 u_int init_id; /* initiator id of who selected */
627 struct scsi_sense_data sense_data;
628};
629
630/* Release SIM Queue */
631struct ccb_relsim {
632 struct ccb_hdr ccb_h;
633 u_int32_t release_flags;
634#define RELSIM_ADJUST_OPENINGS 0x01
635#define RELSIM_RELEASE_AFTER_TIMEOUT 0x02
636#define RELSIM_RELEASE_AFTER_CMDCMPLT 0x04
637#define RELSIM_RELEASE_AFTER_QEMPTY 0x08
638 u_int32_t openings;
639 u_int32_t release_timeout;
640 u_int32_t qfrozen_cnt;
641};
642
643/*
644 * Definitions for the asynchronous callback CCB fields.
645 */
646typedef enum {
647 AC_GETDEV_CHANGED = 0x800,/* Getdev info might have changed */
648 AC_INQ_CHANGED = 0x400,/* Inquiry info might have changed */
649 AC_TRANSFER_NEG = 0x200,/* New transfer settings in effect */
650 AC_LOST_DEVICE = 0x100,/* A device went away */
651 AC_FOUND_DEVICE = 0x080,/* A new device was found */
652 AC_PATH_DEREGISTERED = 0x040,/* A path has de-registered */
653 AC_PATH_REGISTERED = 0x020,/* A new path has been registered */
654 AC_SENT_BDR = 0x010,/* A BDR message was sent to target */
655 AC_SCSI_AEN = 0x008,/* A SCSI AEN has been received */
656 AC_UNSOL_RESEL = 0x002,/* Unsolicited reselection occurred */
657 AC_BUS_RESET = 0x001 /* A SCSI bus reset occurred */
658} ac_code;
659
660typedef void ac_callback_t (void *softc, u_int32_t code,
661 struct cam_path *path, void *args);
662
663/* Set Asynchronous Callback CCB */
664struct ccb_setasync {
665 struct ccb_hdr ccb_h;
666 u_int32_t event_enable; /* Async Event enables */
667 ac_callback_t *callback;
668 void *callback_arg;
669};
670
671/* Set Device Type CCB */
672struct ccb_setdev {
673 struct ccb_hdr ccb_h;
674 u_int8_t dev_type; /* Value for dev type field in EDT */
675};
676
677/* SCSI Control Functions */
678
679/* Abort XPT request CCB */
680struct ccb_abort {
681 struct ccb_hdr ccb_h;
682 union ccb *abort_ccb; /* Pointer to CCB to abort */
683};
684
685/* Reset SCSI Bus CCB */
686struct ccb_resetbus {
687 struct ccb_hdr ccb_h;
688};
689
690/* Reset SCSI Device CCB */
691struct ccb_resetdev {
692 struct ccb_hdr ccb_h;
693};
694
695/* Terminate I/O Process Request CCB */
696struct ccb_termio {
697 struct ccb_hdr ccb_h;
698 union ccb *termio_ccb; /* Pointer to CCB to terminate */
699};
700
b05e84c9
PA		 701typedef enum {
702 CTS_TYPE_CURRENT_SETTINGS,
703 CTS_TYPE_USER_SETTINGS
704} cts_type;
705
706struct ccb_trans_settings_scsi
707{
984263bc 708 u_int valid; /* Which fields to honor */
b05e84c9 709#define CTS_SCSI_VALID_TQ 0x01
984263bc 710 u_int flags;
b05e84c9
PA		 711#define CTS_SCSI_FLAGS_TAG_ENB 0x01
712};
713
714struct ccb_trans_settings_spi
715{
716 u_int valid; /* Which fields to honor */
717#define CTS_SPI_VALID_SYNC_RATE 0x01
718#define CTS_SPI_VALID_SYNC_OFFSET 0x02
719#define CTS_SPI_VALID_BUS_WIDTH 0x04
720#define CTS_SPI_VALID_DISC 0x08
721#define CTS_SPI_VALID_PPR_OPTIONS 0x10
722 u_int flags;
723#define CTS_SPI_FLAGS_DISC_ENB 0x01
984263bc
MD		 724 u_int sync_period;
725 u_int sync_offset;
726 u_int bus_width;
b05e84c9 727 u_int ppr_options;
984263bc
MD		 728};
729
86249a81
PA		 730struct ccb_trans_settings_fc {
731 u_int valid; /* Which fields to honor */
732#define CTS_FC_VALID_WWNN 0x8000
733#define CTS_FC_VALID_WWPN 0x4000
734#define CTS_FC_VALID_PORT 0x2000
735#define CTS_FC_VALID_SPEED 0x1000
736 u_int64_t wwnn; /* world wide node name */
737 u_int64_t wwpn; /* world wide port name */
738 u_int32_t port; /* 24 bit port id, if known */
739 u_int32_t bitrate; /* Mbps */
740};
741
2306276c
PA		 742struct ccb_trans_settings_sas {
743 u_int valid; /* Which fields to honor */
744#define CTS_SAS_VALID_SPEED 0x1000
745 u_int32_t bitrate; /* Mbps */
746};
747
748
b05e84c9
PA		 749/* Get/Set transfer rate/width/disconnection/tag queueing settings */
750struct ccb_trans_settings {
751 struct ccb_hdr ccb_h;
752 cts_type type; /* Current or User settings */
753 cam_proto protocol;
754 u_int protocol_version;
755 cam_xport transport;
756 u_int transport_version;
757 union {
758 u_int valid; /* Which fields to honor */
759 struct ccb_trans_settings_scsi scsi;
760 } proto_specific;
761 union {
762 u_int valid; /* Which fields to honor */
763 struct ccb_trans_settings_spi spi;
86249a81 764 struct ccb_trans_settings_fc fc;
2306276c 765 struct ccb_trans_settings_sas sas;
b05e84c9
PA		 766 } xport_specific;
767};
768
984263bc
MD		 769/*
770 * Calculate the geometry parameters for a device
771 * give the block size and volume size in blocks.
772 */
773struct ccb_calc_geometry {
774 struct ccb_hdr ccb_h;
775 u_int32_t block_size;
bdd58e03
MD		 776 u_int64_t volume_size;
777 u_int32_t cylinders;
984263bc
MD		 778 u_int8_t heads;
779 u_int8_t secs_per_track;
780};
781
782/*
783 * Rescan the given bus, or bus/target/lun
784 */
785struct ccb_rescan {
786 struct ccb_hdr ccb_h;
787 cam_flags flags;
788};
789
790/*
791 * Turn on debugging for the given bus, bus/target, or bus/target/lun.
792 */
793struct ccb_debug {
794 struct ccb_hdr ccb_h;
795 cam_debug_flags flags;
796};
797
798/* Target mode structures. */
799
800struct ccb_en_lun {
801 struct ccb_hdr ccb_h;
802 u_int16_t grp6_len; /* Group 6 VU CDB length */
803 u_int16_t grp7_len; /* Group 7 VU CDB length */
804 u_int8_t enable;
805};
806
807struct ccb_immed_notify {
808 struct ccb_hdr ccb_h;
809 struct scsi_sense_data sense_data;
810 u_int8_t sense_len; /* Number of bytes in sense buffer */
811 u_int8_t initiator_id; /* Id of initiator that selected */
812 u_int8_t message_args[7]; /* Message Arguments */
813};
814
815struct ccb_notify_ack {
816 struct ccb_hdr ccb_h;
817 u_int16_t seq_id; /* Sequence identifier */
818 u_int8_t event; /* Event flags */
819};
820
821/* HBA engine structures. */
822
823typedef enum {
824 EIT_BUFFER, /* Engine type: buffer memory */
825 EIT_LOSSLESS, /* Engine type: lossless compression */
826 EIT_LOSSY, /* Engine type: lossy compression */
827 EIT_ENCRYPT /* Engine type: encryption */
828} ei_type;
829
830typedef enum {
831 EAD_VUNIQUE, /* Engine algorithm ID: vendor unique */
832 EAD_LZ1V1, /* Engine algorithm ID: LZ1 var.1 */
833 EAD_LZ2V1, /* Engine algorithm ID: LZ2 var.1 */
834 EAD_LZ2V2 /* Engine algorithm ID: LZ2 var.2 */
835} ei_algo;
836
837struct ccb_eng_inq {
838 struct ccb_hdr ccb_h;
839 u_int16_t eng_num; /* The engine number for this inquiry */
840 ei_type eng_type; /* Returned engine type */
841 ei_algo eng_algo; /* Returned engine algorithm type */
842 u_int32_t eng_memeory; /* Returned engine memory size */
843};
844
845struct ccb_eng_exec { /* This structure must match SCSIIO size */
846 struct ccb_hdr ccb_h;
847 u_int8_t *pdrv_ptr; /* Ptr used by the peripheral driver */
848 u_int8_t *req_map; /* Ptr for mapping info on the req. */
849 u_int8_t *data_ptr; /* Pointer to the data buf/SG list */
850 u_int32_t dxfer_len; /* Data transfer length */
851 u_int8_t *engdata_ptr; /* Pointer to the engine buffer data */
852 u_int16_t sglist_cnt; /* Num of scatter gather list entries */
853 u_int32_t dmax_len; /* Destination data maximum length */
854 u_int32_t dest_len; /* Destination data length */
855 int32_t src_resid; /* Source residual length: 2's comp */
856 u_int32_t timeout; /* Timeout value */
857 u_int16_t eng_num; /* Engine number for this request */
858 u_int16_t vu_flags; /* Vendor Unique flags */
859};
860
861/*
862 * Definitions for the timeout field in the SCSI I/O CCB.
863 */
864#define CAM_TIME_DEFAULT 0x00000000 /* Use SIM default value */
865#define CAM_TIME_INFINITY 0xFFFFFFFF /* Infinite timeout */
866
867#define CAM_SUCCESS 0 /* For signaling general success */
868#define CAM_FAILURE 1 /* For signaling general failure */
869
870#define CAM_FALSE 0
871#define CAM_TRUE 1
872
873#define XPT_CCB_INVALID -1 /* for signaling a bad CCB to free */
874
875/*
876 * Union of all CCB types for kernel space allocation. This union should
877 * never be used for manipulating CCBs - its only use is for the allocation
878 * and deallocation of raw CCB space and is the return type of xpt_ccb_alloc
879 * and the argument to xpt_ccb_free.
880 */
881union ccb {
882 struct ccb_hdr ccb_h; /* For convenience */
883 struct ccb_scsiio csio;
884 struct ccb_getdev cgd;
885 struct ccb_getdevlist cgdl;
886 struct ccb_pathinq cpi;
887 struct ccb_relsim crs;
888 struct ccb_setasync csa;
889 struct ccb_setdev csd;
890 struct ccb_pathstats cpis;
891 struct ccb_getdevstats cgds;
892 struct ccb_dev_match cdm;
893 struct ccb_trans_settings cts;
894 struct ccb_calc_geometry ccg;
895 struct ccb_abort cab;
896 struct ccb_resetbus crb;
897 struct ccb_resetdev crd;
898 struct ccb_termio tio;
899 struct ccb_accept_tio atio;
900 struct ccb_scsiio ctio;
901 struct ccb_en_lun cel;
902 struct ccb_immed_notify cin;
903 struct ccb_notify_ack cna;
904 struct ccb_eng_inq cei;
905 struct ccb_eng_exec cee;
906 struct ccb_rescan crcn;
907 struct ccb_debug cdbg;
908};
909
910__BEGIN_DECLS
911static __inline void
912cam_fill_csio(struct ccb_scsiio *csio, u_int32_t retries,
913 void (*cbfcnp)(struct cam_periph *, union ccb *),
914 u_int32_t flags, u_int8_t tag_action,
915 u_int8_t *data_ptr, u_int32_t dxfer_len,
916 u_int8_t sense_len, u_int8_t cdb_len,
917 u_int32_t timeout);
918
919static __inline void
920cam_fill_ctio(struct ccb_scsiio *csio, u_int32_t retries,
921 void (*cbfcnp)(struct cam_periph *, union ccb *),
922 u_int32_t flags, u_int tag_action, u_int tag_id,
923 u_int init_id, u_int scsi_status, u_int8_t *data_ptr,
924 u_int32_t dxfer_len, u_int32_t timeout);
925
926static __inline void
927cam_fill_csio(struct ccb_scsiio *csio, u_int32_t retries,
928 void (*cbfcnp)(struct cam_periph *, union ccb *),
929 u_int32_t flags, u_int8_t tag_action,
930 u_int8_t *data_ptr, u_int32_t dxfer_len,
931 u_int8_t sense_len, u_int8_t cdb_len,
932 u_int32_t timeout)
933{
934 csio->ccb_h.func_code = XPT_SCSI_IO;
935 csio->ccb_h.flags = flags;
936 csio->ccb_h.retry_count = retries;
937 csio->ccb_h.cbfcnp = cbfcnp;
938 csio->ccb_h.timeout = timeout;
939 csio->data_ptr = data_ptr;
940 csio->dxfer_len = dxfer_len;
941 csio->sense_len = sense_len;
942 csio->cdb_len = cdb_len;
943 csio->tag_action = tag_action;
944}
945
946static __inline void
947cam_fill_ctio(struct ccb_scsiio *csio, u_int32_t retries,
948 void (*cbfcnp)(struct cam_periph *, union ccb *),
949 u_int32_t flags, u_int tag_action, u_int tag_id,
950 u_int init_id, u_int scsi_status, u_int8_t *data_ptr,
951 u_int32_t dxfer_len, u_int32_t timeout)
952{
953 csio->ccb_h.func_code = XPT_CONT_TARGET_IO;
954 csio->ccb_h.flags = flags;
955 csio->ccb_h.retry_count = retries;
956 csio->ccb_h.cbfcnp = cbfcnp;
957 csio->ccb_h.timeout = timeout;
958 csio->data_ptr = data_ptr;
959 csio->dxfer_len = dxfer_len;
960 csio->scsi_status = scsi_status;
961 csio->tag_action = tag_action;
962 csio->tag_id = tag_id;
963 csio->init_id = init_id;
964}
965
cd8ef3cd
MD		 966void cam_calc_geometry(struct ccb_calc_geometry *ccg, int extended);
967
984263bc
MD		 968__END_DECLS
969
970#endif /* _CAM_CAM_CCB_H */
DragonFly Project GIT Source repo