Remove the FreeBSD 3.x signal code. This includes osendsig(),
[dragonfly.git] / sys / platform / pc32 / i386 / locore.s
CommitLineData
984263bc
MD
1/*-
2 * Copyright (c) 1990 The Regents of the University of California.
3 * All rights reserved.
4 *
5 * This code is derived from software contributed to Berkeley by
6 * William Jolitz.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. All advertising materials mentioning features or use of this software
17 * must display the following acknowledgement:
18 * This product includes software developed by the University of
19 * California, Berkeley and its contributors.
20 * 4. Neither the name of the University nor the names of its contributors
21 * may be used to endorse or promote products derived from this software
22 * without specific prior written permission.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
25 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
30 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
31 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
32 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * SUCH DAMAGE.
35 *
36 * from: @(#)locore.s 7.3 (Berkeley) 5/13/91
37 * $FreeBSD: src/sys/i386/i386/locore.s,v 1.132.2.10 2003/02/03 20:54:49 jhb Exp $
65957d54 38 * $DragonFly: src/sys/platform/pc32/i386/locore.s,v 1.8 2003/10/24 14:10:45 daver Exp $
984263bc
MD
39 *
40 * originally from: locore.s, by William F. Jolitz
41 *
42 * Substantially rewritten by David Greenman, Rod Grimes,
43 * Bruce Evans, Wolfgang Solfrank, Poul-Henning Kamp
44 * and many others.
45 */
46
47#include "opt_bootp.h"
48#include "opt_nfsroot.h"
49
50#include <sys/syscall.h>
51#include <sys/reboot.h>
52
53#include <machine/asmacros.h>
54#include <machine/cputypes.h>
55#include <machine/psl.h>
56#include <machine/pmap.h>
57#include <machine/specialreg.h>
58
59#include "assym.s"
60
61/*
62 * XXX
63 *
64 * Note: This version greatly munged to avoid various assembler errors
65 * that may be fixed in newer versions of gas. Perhaps newer versions
66 * will have more pleasant appearance.
67 */
68
69/*
70 * PTmap is recursive pagemap at top of virtual address space.
71 * Within PTmap, the page directory can be found (third indirection).
72 */
2954c92f
MD
73 .globl PTmap,PTD,PTDpde
74 .set PTmap,(PTDPTDI << PDRSHIFT)
75 .set PTD,PTmap + (PTDPTDI * PAGE_SIZE)
76 .set PTDpde,PTD + (PTDPTDI * PDESIZE)
984263bc
MD
77
78/*
79 * APTmap, APTD is the alternate recursive pagemap.
80 * It's used when modifying another process's page tables.
81 */
2954c92f
MD
82 .globl APTmap,APTD,APTDpde
83 .set APTmap,APTDPTDI << PDRSHIFT
84 .set APTD,APTmap + (APTDPTDI * PAGE_SIZE)
85 .set APTDpde,PTD + (APTDPTDI * PDESIZE)
984263bc
MD
86
87/*
88 * Compiled KERNBASE location
89 */
2954c92f
MD
90 .globl kernbase
91 .set kernbase,KERNBASE
984263bc
MD
92
93/*
94 * Globals
95 */
96 .data
97 ALIGN_DATA /* just to be sure */
98
99 .globl HIDENAME(tmpstk)
100 .space 0x2000 /* space for tmpstk - temporary stack */
101HIDENAME(tmpstk):
102
2954c92f 103 .globl boothowto,bootdev
984263bc 104
2954c92f
MD
105 .globl cpu,cpu_vendor,cpu_id,bootinfo
106 .globl cpu_high, cpu_feature, cpu_procinfo
984263bc 107
2954c92f
MD
108cpu: .long 0 /* are we 386, 386sx, or 486 */
109cpu_id: .long 0 /* stepping ID */
110cpu_high: .long 0 /* highest arg to CPUID */
111cpu_feature: .long 0 /* features */
112cpu_procinfo: .long 0 /* brand index / HTT info */
113cpu_vendor: .space 20 /* CPU origin code */
114bootinfo: .space BOOTINFO_SIZE /* bootinfo buffer space */
984263bc 115
2954c92f 116KERNend: .long 0 /* phys addr end of kernel (just after bss) */
984263bc
MD
117physfree: .long 0 /* phys addr of next free page */
118
2954c92f 119 .globl cpu0prvpage
984263bc 120cpu0pp: .long 0 /* phys addr cpu0 private pg */
2954c92f 121cpu0prvpage: .long 0 /* relocated version */
17a9f566 122cpu0idlestk: .long 0 /* stack for the idle thread */
984263bc 123
2954c92f 124 .globl SMPpt
984263bc 125SMPptpa: .long 0 /* phys addr SMP page table */
2954c92f 126SMPpt: .long 0 /* relocated version */
984263bc 127
2954c92f
MD
128 .globl IdlePTD
129IdlePTD: .long 0 /* phys addr of kernel PTD */
984263bc 130
2954c92f
MD
131 .globl KPTphys
132KPTphys: .long 0 /* PA of kernel page tables */
984263bc 133
2954c92f
MD
134 .globl proc0paddr
135proc0paddr: .long 0 /* VA of proc 0 address space */
136p0upa: .long 0 /* PA of proc0's UPAGES */
984263bc
MD
137
138vm86phystk: .long 0 /* PA of vm86/bios stack */
139
2954c92f
MD
140 .globl vm86paddr, vm86pa
141vm86paddr: .long 0 /* address of vm86 region */
142vm86pa: .long 0 /* phys addr of vm86 region */
984263bc
MD
143
144#ifdef BDE_DEBUGGER
2954c92f
MD
145 .globl bdb_exists /* BDE debugger is present */
146bdb_exists: .long 0
984263bc
MD
147#endif
148
149#ifdef PC98
2954c92f
MD
150 .globl pc98_system_parameter
151pc98_system_parameter:
984263bc
MD
152 .space 0x240
153#endif
154
155/**********************************************************************
156 *
157 * Some handy macros
158 *
159 */
160
161#define R(foo) ((foo)-KERNBASE)
162
17a9f566
MD
163#define ALLOCPAGES(foo) \
164 movl R(physfree), %esi ; \
165 movl $((foo)*PAGE_SIZE), %eax ; \
166 addl %esi, %eax ; \
167 movl %eax, R(physfree) ; \
168 movl %esi, %edi ; \
169 movl $((foo)*PAGE_SIZE),%ecx ; \
170 xorl %eax,%eax ; \
171 cld ; \
172 rep ; \
984263bc
MD
173 stosb
174
175/*
176 * fillkpt
177 * eax = page frame address
178 * ebx = index into page table
179 * ecx = how many pages to map
180 * base = base address of page dir/table
181 * prot = protection bits
182 */
183#define fillkpt(base, prot) \
184 shll $2,%ebx ; \
185 addl base,%ebx ; \
186 orl $PG_V,%eax ; \
187 orl prot,%eax ; \
1881: movl %eax,(%ebx) ; \
189 addl $PAGE_SIZE,%eax ; /* increment physical address */ \
190 addl $4,%ebx ; /* next pte */ \
191 loop 1b
192
193/*
194 * fillkptphys(prot)
195 * eax = physical address
196 * ecx = how many pages to map
197 * prot = protection bits
198 */
199#define fillkptphys(prot) \
200 movl %eax, %ebx ; \
201 shrl $PAGE_SHIFT, %ebx ; \
2954c92f 202 fillkpt(R(KPTphys), prot)
984263bc
MD
203
204 .text
205/**********************************************************************
206 *
207 * This is where the bootblocks start us, set the ball rolling...
208 *
209 */
210NON_GPROF_ENTRY(btext)
211
212#ifdef PC98
213 /* save SYSTEM PARAMETER for resume (NS/T or other) */
214 movl $0xa1400,%esi
2954c92f 215 movl $R(pc98_system_parameter),%edi
984263bc
MD
216 movl $0x0240,%ecx
217 cld
218 rep
219 movsb
220#else /* IBM-PC */
221#ifdef BDE_DEBUGGER
222#ifdef BIOS_STEALS_3K
223 cmpl $0x0375c339,0x95504
224#else
225 cmpl $0x0375c339,0x96104 /* XXX - debugger signature */
226#endif
227 jne 1f
2954c92f 228 movb $1,R(bdb_exists)
984263bc
MD
2291:
230#endif
231/* Tell the bios to warmboot next time */
232 movw $0x1234,0x472
233#endif /* PC98 */
234
235/* Set up a real frame in case the double return in newboot is executed. */
236 pushl %ebp
237 movl %esp, %ebp
238
239/* Don't trust what the BIOS gives for eflags. */
240 pushl $PSL_KERNEL
241 popfl
242
243/*
244 * Don't trust what the BIOS gives for %fs and %gs. Trust the bootstrap
245 * to set %cs, %ds, %es and %ss.
246 */
247 mov %ds, %ax
248 mov %ax, %fs
249 mov %ax, %gs
250
4b938842
MD
251/*
252 * Clear the bss. Not all boot programs do it, and it is our job anyway.
253 *
254 * XXX we don't check that there is memory for our bss and page tables
255 * before using it.
256 *
257 * Note: we must be careful to not overwrite an active gdt or idt. They
258 * inactive from now until we switch to new ones, since we don't load any
259 * more segment registers or permit interrupts until after the switch.
260 */
261 movl $R(_end),%ecx
262 movl $R(_edata),%edi
263 subl %edi,%ecx
264 xorl %eax,%eax
265 cld
266 rep
267 stosb
268
984263bc
MD
269 call recover_bootinfo
270
271/* Get onto a stack that we can trust. */
272/*
273 * XXX this step is delayed in case recover_bootinfo needs to return via
274 * the old stack, but it need not be, since recover_bootinfo actually
275 * returns via the old frame.
276 */
277 movl $R(HIDENAME(tmpstk)),%esp
278
279#ifdef PC98
280 /* pc98_machine_type & M_EPSON_PC98 */
281 testb $0x02,R(_pc98_system_parameter)+220
282 jz 3f
283 /* epson_machine_id <= 0x0b */
284 cmpb $0x0b,R(_pc98_system_parameter)+224
285 ja 3f
286
287 /* count up memory */
288 movl $0x100000,%eax /* next, talley remaining memory */
289 movl $0xFFF-0x100,%ecx
2901: movl 0(%eax),%ebx /* save location to check */
291 movl $0xa55a5aa5,0(%eax) /* write test pattern */
292 cmpl $0xa55a5aa5,0(%eax) /* does not check yet for rollover */
293 jne 2f
294 movl %ebx,0(%eax) /* restore memory */
295 addl $PAGE_SIZE,%eax
296 loop 1b
2972: subl $0x100000,%eax
298 shrl $17,%eax
299 movb %al,R(_pc98_system_parameter)+1
3003:
301
302 movw R(_pc98_system_parameter+0x86),%ax
2954c92f 303 movw %ax,R(cpu_id)
984263bc
MD
304#endif
305
306 call identify_cpu
307
984263bc
MD
308 call create_pagetables
309
310/*
311 * If the CPU has support for VME, turn it on.
312 */
2954c92f 313 testl $CPUID_VME, R(cpu_feature)
984263bc
MD
314 jz 1f
315 movl %cr4, %eax
316 orl $CR4_VME, %eax
317 movl %eax, %cr4
3181:
319
320#ifdef BDE_DEBUGGER
321/*
322 * Adjust as much as possible for paging before enabling paging so that the
323 * adjustments can be traced.
324 */
325 call bdb_prepare_paging
326#endif
327
328/* Now enable paging */
2954c92f 329 movl R(IdlePTD), %eax
984263bc
MD
330 movl %eax,%cr3 /* load ptd addr into mmu */
331 movl %cr0,%eax /* get control word */
332 orl $CR0_PE|CR0_PG,%eax /* enable paging */
333 movl %eax,%cr0 /* and let's page NOW! */
334
17a9f566 335
984263bc
MD
336#ifdef BDE_DEBUGGER
337/*
338 * Complete the adjustments for paging so that we can keep tracing through
339 * initi386() after the low (physical) addresses for the gdt and idt become
340 * invalid.
341 */
342 call bdb_commit_paging
343#endif
344
345 pushl $begin /* jump to high virtualized address */
346 ret
347
348/* now running relocated at KERNBASE where the system is linked to run */
349begin:
17a9f566 350
b7c628e4
MD
351 /*
352 * set up the bootstrap stack. The pcb sits at the end of the
353 * bootstrap stack.
354 */
984263bc 355 /* set up bootstrap stack */
2954c92f 356 movl proc0paddr,%esp /* location of in-kernel pages */
b7c628e4
MD
357 addl $UPAGES*PAGE_SIZE-PCB_SIZE,%esp
358 xorl %eax,%eax /* mark end of frames */
984263bc 359 movl %eax,%ebp
2954c92f
MD
360 /*movl proc0paddr,%eax*/
361 movl IdlePTD, %esi
b7c628e4 362 movl %esi,PCB_CR3(%esp)
984263bc 363
2954c92f 364 testl $CPUID_PGE, R(cpu_feature)
984263bc
MD
365 jz 1f
366 movl %cr4, %eax
367 orl $CR4_PGE, %eax
368 movl %eax, %cr4
3691:
370
371 movl physfree, %esi
2954c92f 372 pushl %esi /* value of first for init386(first) */
17a9f566 373
2954c92f 374 call init386 /* wire 386 chip for unix operation */
984263bc
MD
375 popl %esi
376
2954c92f 377 call mi_startup /* autoconfiguration, mountroot etc */
984263bc
MD
378
379 hlt /* never returns to here */
380
381/*
382 * Signal trampoline, copied to top of user stack
383 */
384NON_GPROF_ENTRY(sigcode)
385 call *SIGF_HANDLER(%esp) /* call signal handler */
386 lea SIGF_UC(%esp),%eax /* get ucontext_t */
387 pushl %eax
388 testl $PSL_VM,UC_EFLAGS(%eax)
389 jne 9f
390 movl UC_GS(%eax),%gs /* restore %gs */
3919:
392 movl $SYS_sigreturn,%eax
393 pushl %eax /* junk to fake return addr. */
394 int $0x80 /* enter kernel with args */
3950: jmp 0b
396
984263bc 397 ALIGN_TEXT
2954c92f 398esigcode:
984263bc
MD
399
400 .data
65957d54 401 .globl szsigcode
2954c92f
MD
402szsigcode:
403 .long esigcode - sigcode
984263bc
MD
404 .text
405
406/**********************************************************************
407 *
408 * Recover the bootinfo passed to us from the boot program
409 *
410 */
411recover_bootinfo:
412 /*
413 * This code is called in different ways depending on what loaded
414 * and started the kernel. This is used to detect how we get the
415 * arguments from the other code and what we do with them.
416 *
417 * Old disk boot blocks:
418 * (*btext)(howto, bootdev, cyloffset, esym);
419 * [return address == 0, and can NOT be returned to]
420 * [cyloffset was not supported by the FreeBSD boot code
421 * and always passed in as 0]
422 * [esym is also known as total in the boot code, and
423 * was never properly supported by the FreeBSD boot code]
424 *
425 * Old diskless netboot code:
426 * (*btext)(0,0,0,0,&nfsdiskless,0,0,0);
427 * [return address != 0, and can NOT be returned to]
428 * If we are being booted by this code it will NOT work,
429 * so we are just going to halt if we find this case.
430 *
431 * New uniform boot code:
432 * (*btext)(howto, bootdev, 0, 0, 0, &bootinfo)
433 * [return address != 0, and can be returned to]
434 *
435 * There may seem to be a lot of wasted arguments in here, but
436 * that is so the newer boot code can still load very old kernels
437 * and old boot code can load new kernels.
438 */
439
440 /*
441 * The old style disk boot blocks fake a frame on the stack and
442 * did an lret to get here. The frame on the stack has a return
443 * address of 0.
444 */
445 cmpl $0,4(%ebp)
446 je olddiskboot
447
448 /*
449 * We have some form of return address, so this is either the
450 * old diskless netboot code, or the new uniform code. That can
451 * be detected by looking at the 5th argument, if it is 0
452 * we are being booted by the new uniform boot code.
453 */
454 cmpl $0,24(%ebp)
455 je newboot
456
457 /*
458 * Seems we have been loaded by the old diskless boot code, we
459 * don't stand a chance of running as the diskless structure
460 * changed considerably between the two, so just halt.
461 */
462 hlt
463
464 /*
465 * We have been loaded by the new uniform boot code.
466 * Let's check the bootinfo version, and if we do not understand
467 * it we return to the loader with a status of 1 to indicate this error
468 */
469newboot:
470 movl 28(%ebp),%ebx /* &bootinfo.version */
471 movl BI_VERSION(%ebx),%eax
472 cmpl $1,%eax /* We only understand version 1 */
473 je 1f
474 movl $1,%eax /* Return status */
475 leave
476 /*
477 * XXX this returns to our caller's caller (as is required) since
478 * we didn't set up a frame and our caller did.
479 */
480 ret
481
4821:
483 /*
484 * If we have a kernelname copy it in
485 */
486 movl BI_KERNELNAME(%ebx),%esi
487 cmpl $0,%esi
488 je 2f /* No kernelname */
489 movl $MAXPATHLEN,%ecx /* Brute force!!! */
2954c92f 490 movl $R(kernelname),%edi
984263bc
MD
491 cmpb $'/',(%esi) /* Make sure it starts with a slash */
492 je 1f
493 movb $'/',(%edi)
494 incl %edi
495 decl %ecx
4961:
497 cld
498 rep
499 movsb
500
5012:
502 /*
503 * Determine the size of the boot loader's copy of the bootinfo
504 * struct. This is impossible to do properly because old versions
505 * of the struct don't contain a size field and there are 2 old
506 * versions with the same version number.
507 */
508 movl $BI_ENDCOMMON,%ecx /* prepare for sizeless version */
509 testl $RB_BOOTINFO,8(%ebp) /* bi_size (and bootinfo) valid? */
510 je got_bi_size /* no, sizeless version */
511 movl BI_SIZE(%ebx),%ecx
512got_bi_size:
513
514 /*
515 * Copy the common part of the bootinfo struct
516 */
517 movl %ebx,%esi
2954c92f 518 movl $R(bootinfo),%edi
984263bc
MD
519 cmpl $BOOTINFO_SIZE,%ecx
520 jbe got_common_bi_size
521 movl $BOOTINFO_SIZE,%ecx
522got_common_bi_size:
523 cld
524 rep
525 movsb
526
527#ifdef NFS_ROOT
528#ifndef BOOTP_NFSV3
529 /*
530 * If we have a nfs_diskless structure copy it in
531 */
532 movl BI_NFS_DISKLESS(%ebx),%esi
533 cmpl $0,%esi
534 je olddiskboot
2954c92f 535 movl $R(nfs_diskless),%edi
984263bc
MD
536 movl $NFSDISKLESS_SIZE,%ecx
537 cld
538 rep
539 movsb
2954c92f 540 movl $R(nfs_diskless_valid),%edi
984263bc
MD
541 movl $1,(%edi)
542#endif
543#endif
544
545 /*
546 * The old style disk boot.
547 * (*btext)(howto, bootdev, cyloffset, esym);
548 * Note that the newer boot code just falls into here to pick
549 * up howto and bootdev, cyloffset and esym are no longer used
550 */
551olddiskboot:
552 movl 8(%ebp),%eax
2954c92f 553 movl %eax,R(boothowto)
984263bc 554 movl 12(%ebp),%eax
2954c92f 555 movl %eax,R(bootdev)
984263bc
MD
556
557 ret
558
559
560/**********************************************************************
561 *
562 * Identify the CPU and initialize anything special about it
563 *
564 */
565identify_cpu:
566
567 /* Try to toggle alignment check flag; does not exist on 386. */
568 pushfl
569 popl %eax
570 movl %eax,%ecx
571 orl $PSL_AC,%eax
572 pushl %eax
573 popfl
574 pushfl
575 popl %eax
576 xorl %ecx,%eax
577 andl $PSL_AC,%eax
578 pushl %ecx
579 popfl
580
581 testl %eax,%eax
582 jnz try486
583
584 /* NexGen CPU does not have aligment check flag. */
585 pushfl
586 movl $0x5555, %eax
587 xorl %edx, %edx
588 movl $2, %ecx
589 clc
590 divl %ecx
591 jz trynexgen
592 popfl
2954c92f 593 movl $CPU_386,R(cpu)
984263bc
MD
594 jmp 3f
595
596trynexgen:
597 popfl
2954c92f
MD
598 movl $CPU_NX586,R(cpu)
599 movl $0x4778654e,R(cpu_vendor) # store vendor string
600 movl $0x72446e65,R(cpu_vendor+4)
601 movl $0x6e657669,R(cpu_vendor+8)
602 movl $0,R(cpu_vendor+12)
984263bc
MD
603 jmp 3f
604
605try486: /* Try to toggle identification flag; does not exist on early 486s. */
606 pushfl
607 popl %eax
608 movl %eax,%ecx
609 xorl $PSL_ID,%eax
610 pushl %eax
611 popfl
612 pushfl
613 popl %eax
614 xorl %ecx,%eax
615 andl $PSL_ID,%eax
616 pushl %ecx
617 popfl
618
619 testl %eax,%eax
620 jnz trycpuid
2954c92f 621 movl $CPU_486,R(cpu)
984263bc
MD
622
623 /*
624 * Check Cyrix CPU
625 * Cyrix CPUs do not change the undefined flags following
626 * execution of the divide instruction which divides 5 by 2.
627 *
628 * Note: CPUID is enabled on M2, so it passes another way.
629 */
630 pushfl
631 movl $0x5555, %eax
632 xorl %edx, %edx
633 movl $2, %ecx
634 clc
635 divl %ecx
636 jnc trycyrix
637 popfl
638 jmp 3f /* You may use Intel CPU. */
639
640trycyrix:
641 popfl
642 /*
643 * IBM Bluelighting CPU also doesn't change the undefined flags.
644 * Because IBM doesn't disclose the information for Bluelighting
645 * CPU, we couldn't distinguish it from Cyrix's (including IBM
646 * brand of Cyrix CPUs).
647 */
2954c92f
MD
648 movl $0x69727943,R(cpu_vendor) # store vendor string
649 movl $0x736e4978,R(cpu_vendor+4)
650 movl $0x64616574,R(cpu_vendor+8)
984263bc
MD
651 jmp 3f
652
653trycpuid: /* Use the `cpuid' instruction. */
654 xorl %eax,%eax
655 cpuid # cpuid 0
2954c92f
MD
656 movl %eax,R(cpu_high) # highest capability
657 movl %ebx,R(cpu_vendor) # store vendor string
658 movl %edx,R(cpu_vendor+4)
659 movl %ecx,R(cpu_vendor+8)
660 movb $0,R(cpu_vendor+12)
984263bc
MD
661
662 movl $1,%eax
663 cpuid # cpuid 1
2954c92f
MD
664 movl %eax,R(cpu_id) # store cpu_id
665 movl %ebx,R(cpu_procinfo) # store cpu_procinfo
666 movl %edx,R(cpu_feature) # store cpu_feature
984263bc
MD
667 rorl $8,%eax # extract family type
668 andl $15,%eax
669 cmpl $5,%eax
670 jae 1f
671
672 /* less than Pentium; must be 486 */
2954c92f 673 movl $CPU_486,R(cpu)
984263bc
MD
674 jmp 3f
6751:
676 /* a Pentium? */
677 cmpl $5,%eax
678 jne 2f
2954c92f 679 movl $CPU_586,R(cpu)
984263bc
MD
680 jmp 3f
6812:
682 /* Greater than Pentium...call it a Pentium Pro */
2954c92f 683 movl $CPU_686,R(cpu)
984263bc
MD
6843:
685 ret
686
687
688/**********************************************************************
689 *
690 * Create the first page directory and its page tables.
691 *
692 */
693
694create_pagetables:
695
696/* Find end of kernel image (rounded up to a page boundary). */
2954c92f 697 movl $R(end),%esi
984263bc
MD
698
699/* Include symbols, if any. */
2954c92f 700 movl R(bootinfo+BI_ESYMTAB),%edi
984263bc
MD
701 testl %edi,%edi
702 je over_symalloc
703 movl %edi,%esi
704 movl $KERNBASE,%edi
2954c92f
MD
705 addl %edi,R(bootinfo+BI_SYMTAB)
706 addl %edi,R(bootinfo+BI_ESYMTAB)
984263bc
MD
707over_symalloc:
708
709/* If we are told where the end of the kernel space is, believe it. */
2954c92f 710 movl R(bootinfo+BI_KERNEND),%edi
984263bc
MD
711 testl %edi,%edi
712 je no_kernend
713 movl %edi,%esi
714no_kernend:
715
716 addl $PAGE_MASK,%esi
717 andl $~PAGE_MASK,%esi
2954c92f 718 movl %esi,R(KERNend) /* save end of kernel */
984263bc
MD
719 movl %esi,R(physfree) /* next free page is at end of kernel */
720
17a9f566 721
984263bc
MD
722/* Allocate Kernel Page Tables */
723 ALLOCPAGES(NKPT)
2954c92f 724 movl %esi,R(KPTphys)
984263bc
MD
725
726/* Allocate Page Table Directory */
727 ALLOCPAGES(1)
2954c92f 728 movl %esi,R(IdlePTD)
984263bc
MD
729
730/* Allocate UPAGES */
731 ALLOCPAGES(UPAGES)
732 movl %esi,R(p0upa)
733 addl $KERNBASE, %esi
2954c92f 734 movl %esi, R(proc0paddr)
984263bc
MD
735
736 ALLOCPAGES(1) /* vm86/bios stack */
737 movl %esi,R(vm86phystk)
738
739 ALLOCPAGES(3) /* pgtable + ext + IOPAGES */
2954c92f 740 movl %esi,R(vm86pa)
984263bc 741 addl $KERNBASE, %esi
2954c92f 742 movl %esi, R(vm86paddr)
984263bc 743
984263bc
MD
744/* Allocate cpu0's private data page */
745 ALLOCPAGES(1)
746 movl %esi,R(cpu0pp)
747 addl $KERNBASE, %esi
2954c92f 748 movl %esi, R(cpu0prvpage) /* relocated to KVM space */
984263bc 749
17a9f566
MD
750/* Allocate cpu0's idle stack */
751 ALLOCPAGES(UPAGES)
752 movl %esi,R(cpu0idlestk)
753
984263bc
MD
754/* Allocate SMP page table page */
755 ALLOCPAGES(1)
756 movl %esi,R(SMPptpa)
757 addl $KERNBASE, %esi
2954c92f 758 movl %esi, R(SMPpt) /* relocated to KVM space */
984263bc
MD
759
760/* Map read-only from zero to the end of the kernel text section */
761 xorl %eax, %eax
762#ifdef BDE_DEBUGGER
763/* If the debugger is present, actually map everything read-write. */
2954c92f 764 cmpl $0,R(bdb_exists)
984263bc
MD
765 jne map_read_write
766#endif
767 xorl %edx,%edx
768
769#if !defined(SMP)
2954c92f 770 testl $CPUID_PGE, R(cpu_feature)
984263bc
MD
771 jz 2f
772 orl $PG_G,%edx
773#endif
774
2954c92f 7752: movl $R(etext),%ecx
984263bc
MD
776 addl $PAGE_MASK,%ecx
777 shrl $PAGE_SHIFT,%ecx
778 fillkptphys(%edx)
779
780/* Map read-write, data, bss and symbols */
2954c92f 781 movl $R(etext),%eax
984263bc
MD
782 addl $PAGE_MASK, %eax
783 andl $~PAGE_MASK, %eax
784map_read_write:
785 movl $PG_RW,%edx
786#if !defined(SMP)
2954c92f 787 testl $CPUID_PGE, R(cpu_feature)
984263bc
MD
788 jz 1f
789 orl $PG_G,%edx
790#endif
791
2954c92f 7921: movl R(KERNend),%ecx
984263bc
MD
793 subl %eax,%ecx
794 shrl $PAGE_SHIFT,%ecx
795 fillkptphys(%edx)
796
797/* Map page directory. */
2954c92f 798 movl R(IdlePTD), %eax
984263bc
MD
799 movl $1, %ecx
800 fillkptphys($PG_RW)
801
802/* Map proc0's UPAGES in the physical way ... */
803 movl R(p0upa), %eax
804 movl $UPAGES, %ecx
805 fillkptphys($PG_RW)
806
807/* Map ISA hole */
808 movl $ISA_HOLE_START, %eax
809 movl $ISA_HOLE_LENGTH>>PAGE_SHIFT, %ecx
810 fillkptphys($PG_RW)
811
812/* Map space for the vm86 region */
813 movl R(vm86phystk), %eax
814 movl $4, %ecx
815 fillkptphys($PG_RW)
816
817/* Map page 0 into the vm86 page table */
818 movl $0, %eax
819 movl $0, %ebx
820 movl $1, %ecx
2954c92f 821 fillkpt(R(vm86pa), $PG_RW|PG_U)
984263bc
MD
822
823/* ...likewise for the ISA hole */
824 movl $ISA_HOLE_START, %eax
825 movl $ISA_HOLE_START>>PAGE_SHIFT, %ebx
826 movl $ISA_HOLE_LENGTH>>PAGE_SHIFT, %ecx
2954c92f 827 fillkpt(R(vm86pa), $PG_RW|PG_U)
984263bc 828
984263bc
MD
829/* Map cpu0's private page into global kmem (4K @ cpu0prvpage) */
830 movl R(cpu0pp), %eax
831 movl $1, %ecx
832 fillkptphys($PG_RW)
833
834/* Map SMP page table page into global kmem FWIW */
835 movl R(SMPptpa), %eax
836 movl $1, %ecx
837 fillkptphys($PG_RW)
838
839/* Map the private page into the SMP page table */
840 movl R(cpu0pp), %eax
841 movl $0, %ebx /* pte offset = 0 */
842 movl $1, %ecx /* one private page coming right up */
843 fillkpt(R(SMPptpa), $PG_RW)
844
17a9f566
MD
845/* Map the cpu0's idle thread stack */
846 movl R(cpu0idlestk), %eax
847 movl $PS_IDLESTACK_PAGE, %ebx
848 movl $UPAGES, %ecx
849 fillkpt(R(SMPptpa), $PG_RW)
850
984263bc
MD
851/* ... and put the page table table in the pde. */
852 movl R(SMPptpa), %eax
853 movl $MPPTDI, %ebx
854 movl $1, %ecx
2954c92f 855 fillkpt(R(IdlePTD), $PG_RW)
984263bc
MD
856
857/* Fakeup VA for the local apic to allow early traps. */
858 ALLOCPAGES(1)
859 movl %esi, %eax
860 movl $(NPTEPG-1), %ebx /* pte offset = NTEPG-1 */
861 movl $1, %ecx /* one private pt coming right up */
862 fillkpt(R(SMPptpa), $PG_RW)
863
17a9f566 864#ifdef SMP
984263bc 865/* Initialize mp lock to allow early traps */
96728c05 866 movl $0, R(mp_lock)
984263bc
MD
867#endif /* SMP */
868
869/* install a pde for temporary double map of bottom of VA */
2954c92f 870 movl R(KPTphys), %eax
984263bc
MD
871 xorl %ebx, %ebx
872 movl $NKPT, %ecx
2954c92f 873 fillkpt(R(IdlePTD), $PG_RW)
984263bc
MD
874
875/* install pde's for pt's */
2954c92f 876 movl R(KPTphys), %eax
984263bc
MD
877 movl $KPTDI, %ebx
878 movl $NKPT, %ecx
2954c92f 879 fillkpt(R(IdlePTD), $PG_RW)
984263bc
MD
880
881/* install a pde recursively mapping page directory as a page table */
2954c92f 882 movl R(IdlePTD), %eax
984263bc
MD
883 movl $PTDPTDI, %ebx
884 movl $1,%ecx
2954c92f 885 fillkpt(R(IdlePTD), $PG_RW)
984263bc
MD
886
887 ret
888
889#ifdef BDE_DEBUGGER
890bdb_prepare_paging:
2954c92f 891 cmpl $0,R(bdb_exists)
984263bc
MD
892 je bdb_prepare_paging_exit
893
894 subl $6,%esp
895
896 /*
897 * Copy and convert debugger entries from the bootstrap gdt and idt
898 * to the kernel gdt and idt. Everything is still in low memory.
899 * Tracing continues to work after paging is enabled because the
900 * low memory addresses remain valid until everything is relocated.
901 * However, tracing through the setidt() that initializes the trace
902 * trap will crash.
903 */
904 sgdt (%esp)
905 movl 2(%esp),%esi /* base address of bootstrap gdt */
2954c92f 906 movl $R(gdt),%edi
984263bc
MD
907 movl %edi,2(%esp) /* prepare to load kernel gdt */
908 movl $8*18/4,%ecx
909 cld
910 rep /* copy gdt */
911 movsl
2954c92f 912 movl $R(gdt),-8+2(%edi) /* adjust gdt self-ptr */
984263bc
MD
913 movb $0x92,-8+5(%edi)
914 lgdt (%esp)
915
916 sidt (%esp)
917 movl 2(%esp),%esi /* base address of current idt */
918 movl 8+4(%esi),%eax /* convert dbg descriptor to ... */
919 movw 8(%esi),%ax
920 movl %eax,R(bdb_dbg_ljmp+1) /* ... immediate offset ... */
921 movl 8+2(%esi),%eax
922 movw %ax,R(bdb_dbg_ljmp+5) /* ... and selector for ljmp */
923 movl 24+4(%esi),%eax /* same for bpt descriptor */
924 movw 24(%esi),%ax
925 movl %eax,R(bdb_bpt_ljmp+1)
926 movl 24+2(%esi),%eax
927 movw %ax,R(bdb_bpt_ljmp+5)
2954c92f 928 movl R(idt),%edi
984263bc
MD
929 movl %edi,2(%esp) /* prepare to load kernel idt */
930 movl $8*4/4,%ecx
931 cld
932 rep /* copy idt */
933 movsl
934 lidt (%esp)
935
936 addl $6,%esp
937
938bdb_prepare_paging_exit:
939 ret
940
941/* Relocate debugger gdt entries and gdt and idt pointers. */
942bdb_commit_paging:
943 cmpl $0,_bdb_exists
944 je bdb_commit_paging_exit
945
946 movl $_gdt+8*9,%eax /* adjust slots 9-17 */
947 movl $9,%ecx
948reloc_gdt:
949 movb $KERNBASE>>24,7(%eax) /* top byte of base addresses, was 0, */
950 addl $8,%eax /* now KERNBASE>>24 */
951 loop reloc_gdt
952
953 subl $6,%esp
954 sgdt (%esp)
955 addl $KERNBASE,2(%esp)
956 lgdt (%esp)
957 sidt (%esp)
958 addl $KERNBASE,2(%esp)
959 lidt (%esp)
960 addl $6,%esp
961
962 int $3
963
964bdb_commit_paging_exit:
965 ret
966
967#endif /* BDE_DEBUGGER */