citrus: fix libc_rtld build with STATIC_LOCALES set.
[dragonfly.git] / etc / defaults / make.conf
CommitLineData
984263bc 1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $
6dd73847 2# $DragonFly: src/etc/defaults/make.conf,v 1.38 2008/11/03 00:25:44 pavalos Exp $
984263bc
MD
3#
4# NOTE: Please would any committer updating this file also update the
5# make.conf(5) manual page, if necessary, which is located in
6# src/share/man/man5/make.conf.5.
7#
8# This file, if present, will be read by make (see /usr/share/mk/sys.mk).
9# It allows you to override macro definitions to make without changing
10# your source tree, or anything the source tree installs.
11#
12# This file must be in valid Makefile syntax.
13#
14# You have to find the things you can put here in the Makefiles and
15# documentation of the source tree.
16#
984263bc
MD
17# The CPUTYPE variable controls which processor should be targeted for
18# generated code. This controls processor-specific optimizations in
19# certain code (currently only OpenSSL) as well as modifying the value
20# of CFLAGS to contain the appropriate optimization directive to gcc.
21# The automatic setting of CFLAGS may be overridden using the
22# NO_CPU_CFLAGS variable below.
23# Currently the following CPU types are recognized:
24# Intel x86 architecture:
f2288f50 25# (AMD CPUs) opteron athlon-fx athlon64 k8 k7 k6-3 k6-2 k6 k5
678993d1 26# (Intel CPUs) p4 pentium-m p3 p2 i686 i586/mmx i586 i486
984263bc
MD
27#
28# If you experience any problems after setting this flag, please unset
29# it again before submitting a bug report or attempting to modify code.
30# It may be that certain types of software will become unstable after being
31# compiled with processor-specific (or higher - see below) optimization flags.
32# If in doubt, do not set CPUTYPE or CFLAGS to non-default values.
33#
34#CPUTYPE=i686
35#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically
36#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically
37#
dfa77fe6
MD
38# The CCVER variable controls which GCC-version to use by default. It
39# should be set using ?= so as not to interfere with CCVER overrides from
f2288f50 40# userland or the buildworld. Note that building world or the kernel using
05664f8a 41# an experimental compiler might be broken at any time. We currently
f2288f50 42# recommend that an override NOT be set in /etc/make.conf.
dfa77fe6 43#
05664f8a 44#CCVER?=gcc41 # (use GCC 4.1, default)
29d48e65 45#
984263bc
MD
46# CFLAGS controls the compiler settings used when compiling C code.
47# Note that optimization settings above -O (-O2, ...) are not recommended
48# or supported for compiling the world or the kernel - please revert any
49# nonstandard optimization settings to "-O" before submitting bug reports
50# to the developers.
984263bc
MD
51#
52#CFLAGS= -O -pipe
53#
54# CXXFLAGS controls the compiler settings used when compiling C++ code.
55# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish
56# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "="
57# alone will remove the often needed contents of CFLAGS from CXXFLAGS.
58#
59#CXXFLAGS+= -fmemoize-lookups -fsave-memoized
60#
61# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested
62# for use in developing FreeBSD and testing changes. They can be used by
63# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not
64# included here due to compiler bugs, e.g., mkdir()'s mode_t argument.
65#
66BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \
67 -Wcast-qual -Wchar-subscripts -Winline \
68 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
69 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings
70#
dcdd01ca
SW
71# WARNS_WERROR causes -Werror to be added when WARNS is in effect.
72#WARNS_WERROR= yes
73#
984263bc
MD
74# To compile just the kernel with special optimizations, you should use
75# this instead of CFLAGS (which is not applicable to kernel builds anyway).
76# There is very little to gain by using higher optimization levels, and doing
77# so can cause problems.
78#
79#COPTFLAGS= -O -pipe
80#
bb4f1f7e
JR
81# Strip the file before installing. Setting this to nothing will keep
82# the debugging symbols in the installed files.
83#STRIP= -s
84#
984263bc
MD
85# Compare before install
86#INSTALL=install -C
87#
984263bc
MD
88# To build ppp with normal permissions
89#PPP_NOSUID= true
90#
91# To enable installing ssh(1) with the setuid bit turned on
92#ENABLE_SUID_SSH= true
93#
5f87b7d3
SZ
94# Default thread library (c_r or thread_xu)
95THREAD_LIB?= thread_xu
96#
ed5d5720
PA
97# To enable Hesiod support in libc
98#WANT_HESIOD= true
99#
100# To disable name caching in the nsswitch subsystem. The generic caching
101# daemon, nscd(8), will not be built either if this option is set.
102#NO_NS_CACHING= true
103#
984263bc 104# To avoid building various parts of the base system:
984263bc 105#NO_BIND= true # do not build BIND
cecff5c1
MD
106#NO_CRYPT= true # do not build crypto code
107#NO_CVS= true # do not build CVS
cecff5c1 108#NO_GAMES= true # do not enter the games subdirectory
48dff0ad 109#NO_GCC44= true # do not build gcc-4.4
f2288f50 110#NO_GDB= true # do not build GDB
984263bc
MD
111#NO_I4B= true # do not build isdn4bsd package
112#NO_IPFILTER= true # do not build IP Filter package
cecff5c1 113#NO_LIBC_R= true # do not build libc_r (re-entrant version of libc)
984263bc
MD
114#NO_LPR= true # do not build lpr and related programs
115#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector
116#NO_MODULES= true # do not build modules with the kernel
117#NO_OBJC= true # do not build Objective C support
118#NO_OPENSSH= true # do not build OpenSSH
119#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH)
120#NO_SENDMAIL= true # do not build sendmail and related programs
cecff5c1 121#NO_SHARE= true # do not enter the share subdirectory
984263bc 122#NO_X= true # do not compile in XWindows support (e.g. doscmd)
984263bc 123#NOINFO= true # do not make or install info files
cecff5c1 124#NOINFOCOMPRESS=true # do not compress info files
984263bc 125#NOMAN= true # do not build manual pages
cecff5c1 126#NOMANCOMPRESS= true # do not compress man pages
984263bc 127#NOPROFILE= true # Avoid compiling profiled libraries
984263bc
MD
128#
129# To build sys/modules when building the world (our old way of doing things)
130#MODULES_WITH_WORLD=true # do not build modules when building kernel
131#
132# The list of modules to build instead of all of them.
fdd814c0 133#MODULES_OVERRIDE= emulation/linux net/ipfw
984263bc 134#
867e3b04
SW
135# The following controls building optional IDEA code in libcrypto.
136# Patents are involved - you must not use this unless
984263bc
MD
137# you either have a license or fall within patent 'fair use'
138# provisions.
139#
140# *** It is YOUR RESPONSIBILITY to determine if you can use this! ***
141#
142# IDEA is patented in the USA and many European countries - thought to
143# be OK to use for any non-commercial use. This is optional.
cecff5c1 144#WANT_IDEA= YES # IDEA (128 bit symmetric encryption)
984263bc 145#
42a03791
SW
146# The paper size for groff(1), either "letter" or "A4"
147#GROFF_PAPER_SIZE= letter
148#
984263bc
MD
149# Default format for system documentation, depends on your printer.
150# Set this to "ascii" for simple printers or screen
151#
152#PRINTERDEVICE= ps
153#
984263bc
MD
154# By default, the system will always use the keyboard/video card as system
155# console. However, the boot blocks may be dynamically configured to use a
156# serial port in addition to or instead of the keyboard/video console.
157#
158# By default we use COM1 as our serial console port *if* we're going to use
159# a serial port as our console at all. Alter as necessary.
160#
161# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
162#
163#BOOT_COMCONSOLE_PORT= 0x3F8
164#
165# The default serial console speed is 9600. Set the speed to a larger value
166# for better interactive response.
167#
168#BOOT_COMCONSOLE_SPEED= 115200
169#
170# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining
171# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel
172# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet
173# still mount the server's '/' (i.e. rather than load the server's kernel).
174#
175#LOADER_TFTP_SUPPORT= YES
176#
7ebbae99
SW
177# To build the installer as part of buildworld.
178#WANT_INSTALLER=yes
179#
984263bc
MD
180# top(1) uses a hash table for the user names. The size of this hash
181# can be tuned to match the number of local users. The table size should
182# be a prime number approximately twice as large as the number of lines in
183# /etc/passwd. The default number is 20011.
184#
185#TOP_TABLE_SIZE= 101
186#
187# Documentation
188#
189# The list of languages and encodings to build and install
190#
191#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R
192#
984263bc
MD
193# sendmail
194#
195# The following sets the default m4 configuration file to use at
196# install time. Use with caution as a make install will overwrite
197# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now
198# deprecated. The value should be a fully qualified path name.
199# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
200# create /etc/mail/sendmail.cf before installworld installs an
201# updated sendmail binary.
202#
203#SENDMAIL_MC=/etc/mail/myconfig.mc
204#
205# The following sets the default m4 configuration file for mail
206# submission to use at install time. Use with caution as a make
207# install will overwrite any existing /etc/mail/submit.cf. The
208# value should be a fully qualified path name.
209# Avoid using a value of /etc/mail/submit.mc as a buildworld will
210# create /etc/mail/submit.cf before installworld installs an
211# updated sendmail binary.
212#
213#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
214#
215# If you need to build additional .cf files during a make buildworld,
216# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC.
217# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
218# create /etc/mail/sendmail.cf before installworld installs an
219# updated sendmail binary.
220#
221#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc
222#
223# Setting the following variable modifies the flags passed to m4 when
224# building a .cf file from a .mc file. It can be used to enable
225# features disabled by default.
226#
227#SENDMAIL_M4_FLAGS=
228#
229# Setting the following variables modifies the build environment for
230# sendmail and its related utilities. For example, SASL support can be
231# added with settings such as:
232#
233# with SASLv1:
234# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL
235# SENDMAIL_LDFLAGS=-L/usr/local/lib
236# SENDMAIL_LDADD=-lsasl
237#
238# with SASLv2:
239# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
240# SENDMAIL_LDFLAGS=-L/usr/local/lib
241# SENDMAIL_LDADD=-lsasl2
242#
243# Note: If you are using Cyrus SASL with other applications which require
244# access to the sasldb file, you should add the following to your
245# sendmail.mc file:
246#
247# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')
248#
249#SENDMAIL_CFLAGS=
250#SENDMAIL_LDFLAGS=
251#SENDMAIL_LDADD=
252#SENDMAIL_DPADD=
253#
254# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a
255# set-user-ID root binary instead of a set-group-ID smmsp binary and will
256# prevent the installation of /etc/mail/submit.cf.
257# This is a deprecated mode of operation. See etc/mail/README for more
258# information.
259#
260#SENDMAIL_SET_USER_ID=
261#
262# The permissions to use on alias and map databases generated using
263# /etc/mail/Makefile. Defaults to 0640.
264#
265#SENDMAIL_MAP_PERMS=