Typo fixing round.
[dragonfly.git] / etc / defaults / make.conf
CommitLineData
984263bc 1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $
6dd73847 2# $DragonFly: src/etc/defaults/make.conf,v 1.38 2008/11/03 00:25:44 pavalos Exp $
984263bc
MD
3#
4# NOTE: Please would any committer updating this file also update the
5# make.conf(5) manual page, if necessary, which is located in
6# src/share/man/man5/make.conf.5.
7#
8# This file, if present, will be read by make (see /usr/share/mk/sys.mk).
9# It allows you to override macro definitions to make without changing
10# your source tree, or anything the source tree installs.
11#
12# This file must be in valid Makefile syntax.
13#
14# You have to find the things you can put here in the Makefiles and
15# documentation of the source tree.
16#
984263bc
MD
17# The CPUTYPE variable controls which processor should be targeted for
18# generated code. This controls processor-specific optimizations in
19# certain code (currently only OpenSSL) as well as modifying the value
20# of CFLAGS to contain the appropriate optimization directive to gcc.
21# The automatic setting of CFLAGS may be overridden using the
22# NO_CPU_CFLAGS variable below.
23# Currently the following CPU types are recognized:
24# Intel x86 architecture:
f2288f50 25# (AMD CPUs) opteron athlon-fx athlon64 k8 k7 k6-3 k6-2 k6 k5
678993d1 26# (Intel CPUs) p4 pentium-m p3 p2 i686 i586/mmx i586 i486
984263bc
MD
27#
28# If you experience any problems after setting this flag, please unset
29# it again before submitting a bug report or attempting to modify code.
30# It may be that certain types of software will become unstable after being
31# compiled with processor-specific (or higher - see below) optimization flags.
32# If in doubt, do not set CPUTYPE or CFLAGS to non-default values.
33#
34#CPUTYPE=i686
35#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically
36#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically
37#
dfa77fe6
MD
38# The CCVER variable controls which GCC-version to use by default. It
39# should be set using ?= so as not to interfere with CCVER overrides from
f2288f50 40# userland or the buildworld. Note that building world or the kernel using
05664f8a 41# an experimental compiler might be broken at any time. We currently
f2288f50 42# recommend that an override NOT be set in /etc/make.conf.
dfa77fe6 43#
05664f8a
PA
44#CCVER?=gcc34 # (use GCC 3.4, old version)
45#CCVER?=gcc41 # (use GCC 4.1, default)
29d48e65 46#
984263bc
MD
47# CFLAGS controls the compiler settings used when compiling C code.
48# Note that optimization settings above -O (-O2, ...) are not recommended
49# or supported for compiling the world or the kernel - please revert any
50# nonstandard optimization settings to "-O" before submitting bug reports
51# to the developers.
984263bc
MD
52#
53#CFLAGS= -O -pipe
54#
55# CXXFLAGS controls the compiler settings used when compiling C++ code.
56# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish
57# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "="
58# alone will remove the often needed contents of CFLAGS from CXXFLAGS.
59#
60#CXXFLAGS+= -fmemoize-lookups -fsave-memoized
61#
62# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested
63# for use in developing FreeBSD and testing changes. They can be used by
64# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not
65# included here due to compiler bugs, e.g., mkdir()'s mode_t argument.
66#
67BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \
68 -Wcast-qual -Wchar-subscripts -Winline \
69 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
70 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings
71#
984263bc
MD
72# To compile just the kernel with special optimizations, you should use
73# this instead of CFLAGS (which is not applicable to kernel builds anyway).
74# There is very little to gain by using higher optimization levels, and doing
75# so can cause problems.
76#
77#COPTFLAGS= -O -pipe
78#
bb4f1f7e
JR
79# Strip the file before installing. Setting this to nothing will keep
80# the debugging symbols in the installed files.
81#STRIP= -s
82#
984263bc
MD
83# Compare before install
84#INSTALL=install -C
85#
984263bc
MD
86# To build ppp with normal permissions
87#PPP_NOSUID= true
88#
89# To enable installing ssh(1) with the setuid bit turned on
90#ENABLE_SUID_SSH= true
91#
5f87b7d3
SZ
92# Default thread library (c_r or thread_xu)
93THREAD_LIB?= thread_xu
94#
2114949a
PA
95# To use GNU cpio as the standard cpio. The default is bsdcpio.
96#WITH_GCPIO= true
fe848e23 97#
ed5d5720
PA
98# To enable Hesiod support in libc
99#WANT_HESIOD= true
100#
101# To disable name caching in the nsswitch subsystem. The generic caching
102# daemon, nscd(8), will not be built either if this option is set.
103#NO_NS_CACHING= true
104#
984263bc 105# To avoid building various parts of the base system:
984263bc 106#NO_BIND= true # do not build BIND
cecff5c1
MD
107#NO_CRYPT= true # do not build crypto code
108#NO_CVS= true # do not build CVS
cecff5c1 109#NO_GAMES= true # do not enter the games subdirectory
7546f6c8 110#NO_GCC34= true # do not build gcc-3.4
f2288f50 111#NO_GDB= true # do not build GDB
984263bc
MD
112#NO_I4B= true # do not build isdn4bsd package
113#NO_IPFILTER= true # do not build IP Filter package
cecff5c1 114#NO_LIBC_R= true # do not build libc_r (re-entrant version of libc)
984263bc
MD
115#NO_LPR= true # do not build lpr and related programs
116#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector
117#NO_MODULES= true # do not build modules with the kernel
118#NO_OBJC= true # do not build Objective C support
119#NO_OPENSSH= true # do not build OpenSSH
120#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH)
121#NO_SENDMAIL= true # do not build sendmail and related programs
cecff5c1 122#NO_SHARE= true # do not enter the share subdirectory
984263bc 123#NO_X= true # do not compile in XWindows support (e.g. doscmd)
984263bc 124#NOINFO= true # do not make or install info files
cecff5c1 125#NOINFOCOMPRESS=true # do not compress info files
984263bc 126#NOMAN= true # do not build manual pages
cecff5c1 127#NOMANCOMPRESS= true # do not compress man pages
984263bc 128#NOPROFILE= true # Avoid compiling profiled libraries
984263bc
MD
129#
130# To build sys/modules when building the world (our old way of doing things)
131#MODULES_WITH_WORLD=true # do not build modules when building kernel
132#
133# The list of modules to build instead of all of them.
fdd814c0 134#MODULES_OVERRIDE= emulation/linux net/ipfw
984263bc 135#
cecff5c1
MD
136# To avoid running MAKEDEV all on /dev during install:
137#NO_MAKEDEV= true
138#
867e3b04
SW
139# The following controls building optional IDEA code in libcrypto.
140# Patents are involved - you must not use this unless
984263bc
MD
141# you either have a license or fall within patent 'fair use'
142# provisions.
143#
144# *** It is YOUR RESPONSIBILITY to determine if you can use this! ***
145#
146# IDEA is patented in the USA and many European countries - thought to
147# be OK to use for any non-commercial use. This is optional.
cecff5c1 148#WANT_IDEA= YES # IDEA (128 bit symmetric encryption)
984263bc 149#
42a03791
SW
150# The paper size for groff(1), either "letter" or "A4"
151#GROFF_PAPER_SIZE= letter
152#
984263bc
MD
153# Default format for system documentation, depends on your printer.
154# Set this to "ascii" for simple printers or screen
155#
156#PRINTERDEVICE= ps
157#
984263bc
MD
158# By default, the system will always use the keyboard/video card as system
159# console. However, the boot blocks may be dynamically configured to use a
160# serial port in addition to or instead of the keyboard/video console.
161#
162# By default we use COM1 as our serial console port *if* we're going to use
163# a serial port as our console at all. Alter as necessary.
164#
165# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
166#
167#BOOT_COMCONSOLE_PORT= 0x3F8
168#
169# The default serial console speed is 9600. Set the speed to a larger value
170# for better interactive response.
171#
172#BOOT_COMCONSOLE_SPEED= 115200
173#
174# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining
175# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel
176# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet
177# still mount the server's '/' (i.e. rather than load the server's kernel).
178#
179#LOADER_TFTP_SUPPORT= YES
180#
7ebbae99
SW
181# To build the installer as part of buildworld.
182#WANT_INSTALLER=yes
183#
cecff5c1
MD
184# If you want Kerberos 5, define this.
185#WANT_KERBEROS= yes
984263bc 186#
984263bc
MD
187# If you want to use the k5su utility, define this to have it installed
188# set-user-ID.
189#ENABLE_SUID_K5SU= yes
190#
984263bc
MD
191# top(1) uses a hash table for the user names. The size of this hash
192# can be tuned to match the number of local users. The table size should
193# be a prime number approximately twice as large as the number of lines in
194# /etc/passwd. The default number is 20011.
195#
196#TOP_TABLE_SIZE= 101
197#
198# Documentation
199#
200# The list of languages and encodings to build and install
201#
202#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R
203#
984263bc
MD
204# sendmail
205#
206# The following sets the default m4 configuration file to use at
207# install time. Use with caution as a make install will overwrite
208# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now
209# deprecated. The value should be a fully qualified path name.
210# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
211# create /etc/mail/sendmail.cf before installworld installs an
212# updated sendmail binary.
213#
214#SENDMAIL_MC=/etc/mail/myconfig.mc
215#
216# The following sets the default m4 configuration file for mail
217# submission to use at install time. Use with caution as a make
218# install will overwrite any existing /etc/mail/submit.cf. The
219# value should be a fully qualified path name.
220# Avoid using a value of /etc/mail/submit.mc as a buildworld will
221# create /etc/mail/submit.cf before installworld installs an
222# updated sendmail binary.
223#
224#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
225#
226# If you need to build additional .cf files during a make buildworld,
227# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC.
228# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
229# create /etc/mail/sendmail.cf before installworld installs an
230# updated sendmail binary.
231#
232#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc
233#
234# Setting the following variable modifies the flags passed to m4 when
235# building a .cf file from a .mc file. It can be used to enable
236# features disabled by default.
237#
238#SENDMAIL_M4_FLAGS=
239#
240# Setting the following variables modifies the build environment for
241# sendmail and its related utilities. For example, SASL support can be
242# added with settings such as:
243#
244# with SASLv1:
245# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL
246# SENDMAIL_LDFLAGS=-L/usr/local/lib
247# SENDMAIL_LDADD=-lsasl
248#
249# with SASLv2:
250# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
251# SENDMAIL_LDFLAGS=-L/usr/local/lib
252# SENDMAIL_LDADD=-lsasl2
253#
254# Note: If you are using Cyrus SASL with other applications which require
255# access to the sasldb file, you should add the following to your
256# sendmail.mc file:
257#
258# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')
259#
260#SENDMAIL_CFLAGS=
261#SENDMAIL_LDFLAGS=
262#SENDMAIL_LDADD=
263#SENDMAIL_DPADD=
264#
265# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a
266# set-user-ID root binary instead of a set-group-ID smmsp binary and will
267# prevent the installation of /etc/mail/submit.cf.
268# This is a deprecated mode of operation. See etc/mail/README for more
269# information.
270#
271#SENDMAIL_SET_USER_ID=
272#
273# The permissions to use on alias and map databases generated using
274# /etc/mail/Makefile. Defaults to 0640.
275#
276#SENDMAIL_MAP_PERMS=