Merge from vendor branch LIBARCHIVE:
[dragonfly.git] / etc / printcap
CommitLineData
984263bc
MD
1# @(#)printcap 5.3 (Berkeley) 6/30/90
2# $FreeBSD: src/etc/printcap,v 1.10.2.2 2002/08/07 10:33:39 blackend Exp $
1de703da 3# $DragonFly: src/etc/printcap,v 1.2 2003/06/17 04:24:45 dillon Exp $
984263bc
MD
4
5#
6# This enables a simple local "raw" printer, hooked up to the first
7# parallel port. No kind of filtering is done, so everything you pass
8# to the "lpr" command will be printed unmodified.
9#
10# Remember, for further print queues you're going to add, you have
11# to choose different spool directories (the "sd" capability below),
12# otherwise you will greatly confuse lpd.
13#
14# For some advanced printing, have a look at the "apsfilter" package.
15# It plugs into the lpd system, allowing you to print a variety of
16# different file types by converting everything to PostScript(tm)
17# format. For more information about apsfilter visit
18#
19# http://www.apsfilter.org/
20#
21# If you don't have a PostScript(tm) printer, don't panic, but do
22# also install the latest "ghostscript" package for best printer support.
23#
24# Do also refer to the "printing" section of the handbook.
25#
26# http://www.freebsd.org/doc/handbook/printing.html
27#
28# A local copy can be found under
29#
30# /usr/share/doc/handbook/handbook.{html,latin1}.
31#
32# Banner pages are now suppressed by default. Remove the :sh: capability
33# to turn them back on.
34#
35#lp|local line printer:\
36# :sh:\
37# :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs:
38#
39# Sample remote printer. The physical printer is on machine "lphost".
40# You can perform any kind of local filtering directly. If you need
41# local filters (e.g. LF -> CR-LF conversion for HP printers), create
42# a filter script that sends the proper escape sequence to the printer
43# and then concatenates stdin to stdout.
44#
45#remote|sample remote printer:\
46# :sh:\
47# :rm=lphost:sd=/var/spool/output/lphost:lf=/var/log/lpd-errs:\
48# :if=/usr/local/libexec/if-script:
49#
50# Simple Russian printer with hardware CP866 character set, output filter
51# used for KOI8-R -> CP866 conversion
52#
53#lp|Russian local line printer:\
54# :sh:of=/usr/libexec/lpr/ru/koi2alt:\
55# :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs: