- Serialize re_{resume,suspend}()
[dragonfly.git] / etc / defaults / make.conf
CommitLineData
984263bc 1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $
fe848e23 2# $DragonFly: src/etc/defaults/make.conf,v 1.36 2008/07/12 14:57:32 pavalos Exp $
984263bc
MD
3#
4# NOTE: Please would any committer updating this file also update the
5# make.conf(5) manual page, if necessary, which is located in
6# src/share/man/man5/make.conf.5.
7#
8# This file, if present, will be read by make (see /usr/share/mk/sys.mk).
9# It allows you to override macro definitions to make without changing
10# your source tree, or anything the source tree installs.
11#
12# This file must be in valid Makefile syntax.
13#
14# You have to find the things you can put here in the Makefiles and
15# documentation of the source tree.
16#
984263bc
MD
17# The CPUTYPE variable controls which processor should be targeted for
18# generated code. This controls processor-specific optimizations in
19# certain code (currently only OpenSSL) as well as modifying the value
20# of CFLAGS to contain the appropriate optimization directive to gcc.
21# The automatic setting of CFLAGS may be overridden using the
22# NO_CPU_CFLAGS variable below.
23# Currently the following CPU types are recognized:
24# Intel x86 architecture:
f2288f50 25# (AMD CPUs) opteron athlon-fx athlon64 k8 k7 k6-3 k6-2 k6 k5
678993d1 26# (Intel CPUs) p4 pentium-m p3 p2 i686 i586/mmx i586 i486
984263bc
MD
27#
28# If you experience any problems after setting this flag, please unset
29# it again before submitting a bug report or attempting to modify code.
30# It may be that certain types of software will become unstable after being
31# compiled with processor-specific (or higher - see below) optimization flags.
32# If in doubt, do not set CPUTYPE or CFLAGS to non-default values.
33#
34#CPUTYPE=i686
35#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically
36#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically
37#
dfa77fe6
MD
38# The CCVER variable controls which GCC-version to use by default. It
39# should be set using ?= so as not to interfere with CCVER overrides from
f2288f50 40# userland or the buildworld. Note that building world or the kernel using
05664f8a 41# an experimental compiler might be broken at any time. We currently
f2288f50 42# recommend that an override NOT be set in /etc/make.conf.
dfa77fe6 43#
05664f8a
PA
44#CCVER?=gcc34 # (use GCC 3.4, old version)
45#CCVER?=gcc41 # (use GCC 4.1, default)
29d48e65 46#
984263bc
MD
47# CFLAGS controls the compiler settings used when compiling C code.
48# Note that optimization settings above -O (-O2, ...) are not recommended
49# or supported for compiling the world or the kernel - please revert any
50# nonstandard optimization settings to "-O" before submitting bug reports
51# to the developers.
984263bc
MD
52#
53#CFLAGS= -O -pipe
54#
55# CXXFLAGS controls the compiler settings used when compiling C++ code.
56# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish
57# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "="
58# alone will remove the often needed contents of CFLAGS from CXXFLAGS.
59#
60#CXXFLAGS+= -fmemoize-lookups -fsave-memoized
61#
62# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested
63# for use in developing FreeBSD and testing changes. They can be used by
64# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not
65# included here due to compiler bugs, e.g., mkdir()'s mode_t argument.
66#
67BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \
68 -Wcast-qual -Wchar-subscripts -Winline \
69 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
70 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings
71#
72# WARNS_WERROR causes -Werror to be added when WARNS is in effect.
984263bc
MD
73#WARNS_WERROR= yes
74#
75# To compile just the kernel with special optimizations, you should use
76# this instead of CFLAGS (which is not applicable to kernel builds anyway).
77# There is very little to gain by using higher optimization levels, and doing
78# so can cause problems.
79#
80#COPTFLAGS= -O -pipe
81#
bb4f1f7e
JR
82# Strip the file before installing. Setting this to nothing will keep
83# the debugging symbols in the installed files.
84#STRIP= -s
85#
984263bc
MD
86# Compare before install
87#INSTALL=install -C
88#
984263bc
MD
89# To build ppp with normal permissions
90#PPP_NOSUID= true
91#
92# To enable installing ssh(1) with the setuid bit turned on
93#ENABLE_SUID_SSH= true
94#
5f87b7d3
SZ
95# Default thread library (c_r or thread_xu)
96THREAD_LIB?= thread_xu
97#
fe848e23
PA
98# To use bsdcpio as the standard cpio. The default is GNU cpio.
99#WITH_BSDCPIO= true
100#
984263bc 101# To avoid building various parts of the base system:
984263bc 102#NO_BIND= true # do not build BIND
cecff5c1
MD
103#NO_CRYPT= true # do not build crypto code
104#NO_CVS= true # do not build CVS
cecff5c1 105#NO_GAMES= true # do not enter the games subdirectory
7546f6c8 106#NO_GCC34= true # do not build gcc-3.4
f2288f50 107#NO_GDB= true # do not build GDB
984263bc
MD
108#NO_I4B= true # do not build isdn4bsd package
109#NO_IPFILTER= true # do not build IP Filter package
cecff5c1 110#NO_LIBC_R= true # do not build libc_r (re-entrant version of libc)
984263bc
MD
111#NO_LPR= true # do not build lpr and related programs
112#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector
113#NO_MODULES= true # do not build modules with the kernel
114#NO_OBJC= true # do not build Objective C support
115#NO_OPENSSH= true # do not build OpenSSH
116#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH)
117#NO_SENDMAIL= true # do not build sendmail and related programs
cecff5c1 118#NO_SHARE= true # do not enter the share subdirectory
984263bc 119#NO_X= true # do not compile in XWindows support (e.g. doscmd)
984263bc 120#NOINFO= true # do not make or install info files
cecff5c1 121#NOINFOCOMPRESS=true # do not compress info files
984263bc 122#NOMAN= true # do not build manual pages
cecff5c1 123#NOMANCOMPRESS= true # do not compress man pages
984263bc 124#NOPROFILE= true # Avoid compiling profiled libraries
984263bc
MD
125#
126# To build sys/modules when building the world (our old way of doing things)
127#MODULES_WITH_WORLD=true # do not build modules when building kernel
128#
129# The list of modules to build instead of all of them.
fdd814c0 130#MODULES_OVERRIDE= emulation/linux net/ipfw
984263bc 131#
cecff5c1
MD
132# To avoid running MAKEDEV all on /dev during install:
133#NO_MAKEDEV= true
134#
867e3b04
SW
135# The following controls building optional IDEA code in libcrypto.
136# Patents are involved - you must not use this unless
984263bc
MD
137# you either have a license or fall within patent 'fair use'
138# provisions.
139#
140# *** It is YOUR RESPONSIBILITY to determine if you can use this! ***
141#
142# IDEA is patented in the USA and many European countries - thought to
143# be OK to use for any non-commercial use. This is optional.
cecff5c1 144#WANT_IDEA= YES # IDEA (128 bit symmetric encryption)
984263bc 145#
42a03791
SW
146# The paper size for groff(1), either "letter" or "A4"
147#GROFF_PAPER_SIZE= letter
148#
984263bc
MD
149# Default format for system documentation, depends on your printer.
150# Set this to "ascii" for simple printers or screen
151#
152#PRINTERDEVICE= ps
153#
984263bc
MD
154# By default, the system will always use the keyboard/video card as system
155# console. However, the boot blocks may be dynamically configured to use a
156# serial port in addition to or instead of the keyboard/video console.
157#
158# By default we use COM1 as our serial console port *if* we're going to use
159# a serial port as our console at all. Alter as necessary.
160#
161# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
162#
163#BOOT_COMCONSOLE_PORT= 0x3F8
164#
165# The default serial console speed is 9600. Set the speed to a larger value
166# for better interactive response.
167#
168#BOOT_COMCONSOLE_SPEED= 115200
169#
170# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining
171# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel
172# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet
173# still mount the server's '/' (i.e. rather than load the server's kernel).
174#
175#LOADER_TFTP_SUPPORT= YES
176#
7ebbae99
SW
177# To build the installer as part of buildworld.
178#WANT_INSTALLER=yes
179#
cecff5c1
MD
180# If you want Kerberos 5, define this.
181#WANT_KERBEROS= yes
984263bc 182#
984263bc
MD
183# If you want to use the k5su utility, define this to have it installed
184# set-user-ID.
185#ENABLE_SUID_K5SU= yes
186#
984263bc
MD
187# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution
188# file(s) you use on your site (see /usr/share/examples/cvsup/README for more
189# information on CVSup and these files). To use, do "make update" in /usr/src.
190#
191#SUP_UPDATE= yes
984263bc
MD
192#SUP= /usr/local/bin/cvsup
193#SUPFLAGS= -g -L 2
cecff5c1
MD
194#SUPHOST= cvsup.dragonflybsd.org
195#SUPFILE= /usr/share/examples/cvsup/DragonFly-src-supfile
984263bc
MD
196#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile
197#
198# top(1) uses a hash table for the user names. The size of this hash
199# can be tuned to match the number of local users. The table size should
200# be a prime number approximately twice as large as the number of lines in
201# /etc/passwd. The default number is 20011.
202#
203#TOP_TABLE_SIZE= 101
204#
205# Documentation
206#
207# The list of languages and encodings to build and install
208#
209#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R
210#
984263bc
MD
211# sendmail
212#
213# The following sets the default m4 configuration file to use at
214# install time. Use with caution as a make install will overwrite
215# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now
216# deprecated. The value should be a fully qualified path name.
217# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
218# create /etc/mail/sendmail.cf before installworld installs an
219# updated sendmail binary.
220#
221#SENDMAIL_MC=/etc/mail/myconfig.mc
222#
223# The following sets the default m4 configuration file for mail
224# submission to use at install time. Use with caution as a make
225# install will overwrite any existing /etc/mail/submit.cf. The
226# value should be a fully qualified path name.
227# Avoid using a value of /etc/mail/submit.mc as a buildworld will
228# create /etc/mail/submit.cf before installworld installs an
229# updated sendmail binary.
230#
231#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
232#
233# If you need to build additional .cf files during a make buildworld,
234# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC.
235# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
236# create /etc/mail/sendmail.cf before installworld installs an
237# updated sendmail binary.
238#
239#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc
240#
241# Setting the following variable modifies the flags passed to m4 when
242# building a .cf file from a .mc file. It can be used to enable
243# features disabled by default.
244#
245#SENDMAIL_M4_FLAGS=
246#
247# Setting the following variables modifies the build environment for
248# sendmail and its related utilities. For example, SASL support can be
249# added with settings such as:
250#
251# with SASLv1:
252# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL
253# SENDMAIL_LDFLAGS=-L/usr/local/lib
254# SENDMAIL_LDADD=-lsasl
255#
256# with SASLv2:
257# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
258# SENDMAIL_LDFLAGS=-L/usr/local/lib
259# SENDMAIL_LDADD=-lsasl2
260#
261# Note: If you are using Cyrus SASL with other applications which require
262# access to the sasldb file, you should add the following to your
263# sendmail.mc file:
264#
265# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')
266#
267#SENDMAIL_CFLAGS=
268#SENDMAIL_LDFLAGS=
269#SENDMAIL_LDADD=
270#SENDMAIL_DPADD=
271#
272# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a
273# set-user-ID root binary instead of a set-group-ID smmsp binary and will
274# prevent the installation of /etc/mail/submit.cf.
275# This is a deprecated mode of operation. See etc/mail/README for more
276# information.
277#
278#SENDMAIL_SET_USER_ID=
279#
280# The permissions to use on alias and map databases generated using
281# /etc/mail/Makefile. Defaults to 0640.
282#
283#SENDMAIL_MAP_PERMS=