Another attempt to fix make -j N issues with this subdirectory.
[dragonfly.git] / Makefile.inc1
CommitLineData
984263bc
MD
1#
2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
c02263c2 3# $DragonFly: src/Makefile.inc1,v 1.24 2004/03/22 23:49:05 dillon Exp $
984263bc
MD
4#
5# Make command line options:
984263bc
MD
6# -DMAKE_KERBEROS5 to build Kerberos5
7# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
8# -DNOCLEAN do not clean at all
9# -DNOCRYPT will prevent building of crypt versions
10# -DNOMAN do not build the manual pages
11# -DNOPROFILE do not build profiled libraries
984263bc
MD
12# -DNOGAMES do not go into games subdir
13# -DNOSHARE do not go into share subdir
14# -DNOINFO do not make or install info files
15# -DNOLIBC_R do not build libc_r.
16# -DNO_FORTRAN do not build g77 and related libraries.
17# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
18# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
19# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
20# -DNO_PORTSUPDATE do not update ports in ${MAKE} update
21# -DNO_DOCUPDATE do not update doc in ${MAKE} update
22# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
23# TARGET_ARCH="arch" to crossbuild world to a different arch
984263bc
MD
24#
25# The intended user-driven targets are:
1397f94a 26#
984263bc 27# buildworld - rebuild *everything*, including glue to help do upgrades
1397f94a
MD
28# quickworld - skip the glue and do a depend+build on the meat
29# realquickworld - skip the glue and depend stages and just build the meat
30# crossworld - only build the glue (particularly the cross-build environment)
984263bc
MD
31# installworld- install everything built by "buildworld"
32# update - convenient way to update your source tree (eg: sup/cvs)
33# most - build user commands, no libraries or include files
34# installmost - install user commands, no libraries or include files
35#
36# Standard targets (not defined here) are documented in the makefiles in
37# /usr/share/mk. These include:
38# obj depend all install clean cleandepend cleanobj
39
40# Put initial settings here.
41SUBDIR=
42
43# We must do share/info early so that installation of info `dir'
44# entries works correctly. Do it first since it is less likely to
45# grow dependencies on include and lib than vice versa.
46.if exists(${.CURDIR}/share/info)
47SUBDIR+= share/info
48.endif
49
50# We must do include and lib early so that the perl *.ph generation
51# works correctly as it uses the header files installed by this.
52.if exists(${.CURDIR}/include)
53SUBDIR+= include
54.endif
55.if exists(${.CURDIR}/lib)
56SUBDIR+= lib
57.endif
17d0fefe
MD
58# This exists simply to ensure that the obj dir hierarchy is
59# intact for nrelease, allowing the nrelease Makefile's to
60# reference ${.OBJDIR}.
61#
62.if exists(${.CURDIR}/nrelease)
63SUBDIR+= nrelease
64.endif
984263bc
MD
65
66.if exists(${.CURDIR}/bin)
67SUBDIR+= bin
68.endif
69.if exists(${.CURDIR}/games) && !defined(NOGAMES)
70SUBDIR+= games
71.endif
72.if exists(${.CURDIR}/gnu)
73SUBDIR+= gnu
74.endif
984263bc
MD
75.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
76 !defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
77SUBDIR+= kerberos5
78.endif
79.if exists(${.CURDIR}/libexec)
80SUBDIR+= libexec
81.endif
82.if exists(${.CURDIR}/sbin)
83SUBDIR+= sbin
84.endif
de347b31 85.if exists(${.CURDIR}/secure) && !defined(NOCRYPT)
984263bc
MD
86SUBDIR+= secure
87.endif
88.if exists(${.CURDIR}/share) && !defined(NOSHARE)
89SUBDIR+= share
90.endif
91.if exists(${.CURDIR}/sys)
92SUBDIR+= sys
93.endif
94.if exists(${.CURDIR}/usr.bin)
95SUBDIR+= usr.bin
96.endif
97.if exists(${.CURDIR}/usr.sbin)
98SUBDIR+= usr.sbin
99.endif
100
101# etc must be last for "distribute" to work
102.if exists(${.CURDIR}/etc)
103SUBDIR+= etc
104.endif
105
106# These are last, since it is nice to at least get the base system
107# rebuilt before you do them.
108.if defined(LOCAL_DIRS)
109.for _DIR in ${LOCAL_DIRS}
110.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
111SUBDIR+= ${_DIR}
112.endif
113.endfor
114.endif
115
116.if defined(SUBDIR_OVERRIDE)
117SUBDIR= ${SUBDIR_OVERRIDE}
118.endif
119
120.if defined(NOCLEANDIR)
121CLEANDIR= clean cleandepend
122.else
123CLEANDIR= cleandir
124.endif
125
126SUP?= /usr/local/bin/cvsup
127SUPFLAGS?= -g -L 2 -P -
128.if defined(SUPHOST)
129SUPFLAGS+= -h ${SUPHOST}
130.endif
131
1397f94a
MD
132# Object directory base in primary make. Note that when we rerun make
133# from inside this file we change MAKEOBJDIRPREFIX to the appropriate
134# subdirectory because the rest of the build system needs it that way.
135# The original object directory base is saved in OBJTREE.
136#
984263bc 137MAKEOBJDIRPREFIX?= /usr/obj
1397f94a
MD
138OBJTREE?= ${MAKEOBJDIRPREFIX}
139
140# Used for stage installs and pathing
141#
142DESTDIRBASE?= ${OBJTREE}${.CURDIR}
143
984263bc
MD
144TARGET_ARCH?= ${MACHINE_ARCH}
145.if ${TARGET_ARCH} == ${MACHINE_ARCH}
146TARGET?= ${MACHINE}
147.else
148TARGET?= ${TARGET_ARCH}
149.endif
150.if make(buildworld)
151BUILD_ARCH!= sysctl -n hw.machine_arch
152.if ${MACHINE_ARCH} != ${BUILD_ARCH}
153.error To cross-build, set TARGET_ARCH.
154.endif
155.endif
1397f94a
MD
156
157# BTOOLS (Natively built) All non-cross-development tools that the
158# main build needs. This includes things like 'mkdir' and 'rm'.
159# We will not use the native system's exec path once we start
160# on WORLD. (bootstrap-tools and build-tools or BTOOLS)
161#
162# CTOOLS (Natively built) Cross development tools which are specific
163# to the target architecture.
164#
165# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and
166# CTOOLS.
167#
168# MACHINE_ARCH Architecture we are building on
169# TARGET_ARCH Architecture we are building for
170#
171BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH}
172CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
173WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH}
174
175# The strict temporary command path contains all binaries required
176# by the buildworld system after the cross-tools stage.
177#
178STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
984263bc
MD
179
180TMPDIR?= /tmp
181TMPPID!= echo $$$$
984263bc
MD
182
183#
184# Building a world goes through the following stages
185#
186# 1. bootstrap-tool stage [BMAKE]
187# This stage is responsible for creating programs that
188# are needed for backward compatibility reasons. They
189# are not built as cross-tools.
190# 2. build-tool stage [TMAKE]
191# This stage is responsible for creating the object
192# tree and building any tools that are needed during
193# the build process.
194# 3. cross-tool stage [XMAKE]
195# This stage is responsible for creating any tools that
196# are needed for cross-builds. A cross-compiler is one
197# of them.
198# 4. world stage [WMAKE]
199# This stage actually builds the world.
200# 5. install stage (optional) [IMAKE]
201# This stage installs a previously built world.
202#
203
984263bc 204# bootstrap-tool stage
1397f94a
MD
205#
206BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
207 OBJTREE=${OBJTREE} \
984263bc
MD
208 DESTDIR= \
209 INSTALL="sh ${.CURDIR}/tools/install.sh"
1397f94a 210
984263bc
MD
211BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
212 -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
213 -DNO_WERROR
214
215# build-tool stage
1397f94a
MD
216#
217TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
218 OBJTREE=${OBJTREE} \
984263bc
MD
219 DESTDIR= \
220 INSTALL="sh ${.CURDIR}/tools/install.sh"
1397f94a
MD
221
222TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
223 -DNO_FORTRAN
984263bc
MD
224
225# cross-tool stage
1397f94a
MD
226#
227# note: TOOLS_PREFIX points to the obj root holding the cross
228# compiler binaries, while INCS_PREFIX points to the obj root holding
229# the target environment (and also determines where cross-built
230# libraries and crt*.o are installed).
231#
232XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \
233 OBJTREE=${OBJTREE} \
234 DESTDIR=${CTOOLSDEST} \
235 INSTALL="sh ${.CURDIR}/tools/install.sh" \
236 TOOLS_PREFIX=${CTOOLSDEST} \
237 USRDATA_PREFIX=${WORLDDEST}
238
239XMAKE= ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB
240
241# world stage, note the strict path and note that TOOLS_PREFIX is left
242# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
243# which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
244# for both binary and library paths, even though it is being compiled to
245# WORLDDEST. None of the programs in the world stage are ever actually
246# executed during the buildworld/installworld.
247#
248CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \
249 OBJTREE=${OBJTREE} \
250 MACHINE_ARCH=${TARGET_ARCH} \
251 MACHINE=${TARGET} \
252 OBJFORMAT_PATH=${CTOOLSDEST} \
253 PERL5LIB=${WORLDDEST}/usr/libdata/perl/5.00503 \
c02263c2
MD
254 GROFF_BIN_PATH=${BTOOLSDEST}/usr/bin \
255 GROFF_FONT_PATH=${BTOOLSDEST}/usr/share/groff_font \
256 GROFF_TMAC_PATH=${BTOOLSDEST}/usr/share/tmac
984263bc 257
984263bc 258WMAKEENV= ${CROSSENV} \
1397f94a 259 DESTDIR=${WORLDDEST} \
984263bc 260 INSTALL="sh ${.CURDIR}/tools/install.sh" \
1397f94a
MD
261 PATH=${STRICTTMPPATH}
262
984263bc
MD
263WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
264
265# install stage
266IMAKEENV= ${CROSSENV} \
1397f94a 267 PATH=${STRICTTMPPATH}
984263bc
MD
268IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
269
270# kernel stage
592ce487 271KMAKEENV= ${WMAKEENV} \
c02263c2 272 OBJFORMAT_PATH=${WORLDDEST}:${OBJFORMAT_PATH}
984263bc 273
984263bc
MD
274# buildworld
275#
276# Attempt to rebuild the entire system, with reasonable chance of
277# success, regardless of how old your existing system is.
278#
279_worldtmp:
280 @echo
281 @echo "--------------------------------------------------------------"
282 @echo ">>> Rebuilding the temporary build tree"
283 @echo "--------------------------------------------------------------"
284.if !defined(NOCLEAN)
1397f94a 285 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
984263bc
MD
286.else
287 # XXX - These two can depend on any header file.
288 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
289 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
290.endif
1397f94a
MD
291 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
292.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
293 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
294 -p ${_dir}/ > /dev/null
295 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
296 -p ${_dir}/usr > /dev/null
984263bc 297.endfor
1397f94a
MD
298 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
299 -p ${WORLDDEST}/usr/include > /dev/null
300 ln -sf ${.CURDIR}/sys ${WORLDDEST}
301
984263bc
MD
302_bootstrap-tools:
303 @echo
304 @echo "--------------------------------------------------------------"
305 @echo ">>> stage 1: bootstrap tools"
306 @echo "--------------------------------------------------------------"
307 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
308_cleanobj:
984263bc
MD
309 @echo
310 @echo "--------------------------------------------------------------"
1397f94a 311 @echo ">>> stage 2a: cleaning up the object tree"
984263bc
MD
312 @echo "--------------------------------------------------------------"
313 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
984263bc
MD
314_obj:
315 @echo
316 @echo "--------------------------------------------------------------"
1397f94a 317 @echo ">>> stage 2b: rebuilding the object tree"
984263bc
MD
318 @echo "--------------------------------------------------------------"
319 cd ${.CURDIR}; ${WMAKE} par-obj
320_build-tools:
321 @echo
322 @echo "--------------------------------------------------------------"
1397f94a 323 @echo ">>> stage 2c: build tools"
984263bc
MD
324 @echo "--------------------------------------------------------------"
325 cd ${.CURDIR}; ${TMAKE} build-tools
326_cross-tools:
327 @echo
328 @echo "--------------------------------------------------------------"
329 @echo ">>> stage 3: cross tools"
330 @echo "--------------------------------------------------------------"
331 cd ${.CURDIR}; ${XMAKE} cross-tools
332_includes:
333 @echo
334 @echo "--------------------------------------------------------------"
1397f94a 335 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
984263bc
MD
336 @echo "--------------------------------------------------------------"
337 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
338_libraries:
339 @echo
340 @echo "--------------------------------------------------------------"
1397f94a 341 @echo ">>> stage 4b: building libraries"
984263bc
MD
342 @echo "--------------------------------------------------------------"
343 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
344_depend:
345 @echo
346 @echo "--------------------------------------------------------------"
1397f94a 347 @echo ">>> stage 4c: make dependencies"
984263bc
MD
348 @echo "--------------------------------------------------------------"
349 cd ${.CURDIR}; ${WMAKE} par-depend
350everything:
351 @echo
352 @echo "--------------------------------------------------------------"
1397f94a 353 @echo ">>> stage 4d: building everything.."
984263bc
MD
354 @echo "--------------------------------------------------------------"
355 cd ${.CURDIR}; ${WMAKE} all
356
1397f94a
MD
357# note: buildworld no longer depends on _cleanobj because we rm -rf the
358# entire object tree and built the bootstrap tools in a different location.
359#
360# buildworld - build everything from scratch
361# quickworld - skip the bootstrap, build, and cross-build steps
362# realquickworld - skip the bootstrap, build, crossbuild, and depend step.
363#
364# note: we include _obj in realquickworld to prevent accidental creation
365# of files in /usr/src.
984263bc
MD
366
367WMAKE_TGTS=
368.if !defined(SUBDIR_OVERRIDE)
369WMAKE_TGTS+= _worldtmp _bootstrap-tools
370.endif
1397f94a 371WMAKE_TGTS+= _obj _build-tools
984263bc
MD
372.if !defined(SUBDIR_OVERRIDE)
373WMAKE_TGTS+= _cross-tools
374.endif
375WMAKE_TGTS+= _includes _libraries _depend everything
376
377buildworld: ${WMAKE_TGTS}
1397f94a
MD
378
379quickworld: _obj _includes _libraries _depend everything
380
381realquickworld: _obj _includes _libraries everything
382
383crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
384
984263bc
MD
385.ORDER: ${WMAKE_TGTS}
386
387#
388# installcheck
389#
390# Checks to be sure system is ready for installworld
391#
392installcheck:
393.if !defined(NO_SENDMAIL)
72ac4ef4 394 @if ! `id -u smmsp > /dev/null`; then \
984263bc
MD
395 echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
396 false; \
397 fi
72ac4ef4 398 @if ! `id -g smmsp > /dev/null`; then \
984263bc
MD
399 echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
400 false; \
401 fi
402.endif
403
404#
405# distributeworld
406#
407# Distributes everything compiled by a `buildworld'.
408#
409# installworld
410#
411# Installs everything compiled by a 'buildworld'.
412#
413distributeworld installworld: installcheck
984263bc 414 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
984263bc
MD
415
416#
417# reinstall
418#
419# If you have a build server, you can NFS mount the source and obj directories
420# and do a 'make reinstall' on the *client* to install new binaries from the
421# most recent server build.
422#
423reinstall:
424 @echo "--------------------------------------------------------------"
425 @echo ">>> Making hierarchy"
426 @echo "--------------------------------------------------------------"
427 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
428 @echo
429 @echo "--------------------------------------------------------------"
430 @echo ">>> Installing everything.."
431 @echo "--------------------------------------------------------------"
432 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
433.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
434 @echo
435 @echo "--------------------------------------------------------------"
436 @echo ">>> Rebuilding man page indices"
437 @echo "--------------------------------------------------------------"
438 cd ${.CURDIR}/share/man; ${MAKE} makedb
439.endif
440
441redistribute:
442 @echo "--------------------------------------------------------------"
443 @echo ">>> Distributing everything.."
444 @echo "--------------------------------------------------------------"
445 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
446
447#
448# buildkernel and installkernel
449#
450# Which kernels to build and/or install is specified by setting
451# KERNCONF. If not defined a GENERIC kernel is built/installed.
452# Only the existing (depending TARGET) config files are used
453# for building kernels and only the first of these is designated
454# as the one being installed.
455#
456# Note that we have to use TARGET instead of TARGET_ARCH when
457# we're in kernel-land. Since only TARGET_ARCH is (expected) to
458# be set to cross-build, we have to make sure TARGET is set
459# properly.
460
461.if !defined(KERNCONF) && defined(KERNEL)
462KERNCONF= ${KERNEL}
463KERNWARN= yes
464.else
465KERNCONF?= GENERIC
466.endif
467INSTKERNNAME?= kernel
468
469KRNLSRCDIR= ${.CURDIR}/sys
470KRNLCONFDIR= ${KRNLSRCDIR}/${TARGET}/conf
471KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
472KERNCONFDIR?= ${KRNLCONFDIR}
473
474BUILDKERNELS=
475INSTALLKERNEL=
476.for _kernel in ${KERNCONF}
477.if exists(${KERNCONFDIR}/${_kernel})
478BUILDKERNELS+= ${_kernel}
479.if empty(INSTALLKERNEL)
480INSTALLKERNEL= ${_kernel}
481.endif
482.endif
483.endfor
484
485#
486# buildkernel
487#
488# Builds all kernels defined by BUILDKERNELS.
489#
490buildkernel:
491.if empty(BUILDKERNELS)
492 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
493 @false
494.endif
495.if defined(KERNWARN)
496 @echo "--------------------------------------------------------------"
497 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
498 @echo "--------------------------------------------------------------"
499 @sleep 3
500.endif
501 @echo
502.for _kernel in ${BUILDKERNELS}
503 @echo "--------------------------------------------------------------"
504 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
505 @echo "--------------------------------------------------------------"
506 @echo "===> ${_kernel}"
507 mkdir -p ${KRNLOBJDIR}
508.if !defined(NO_KERNELCONFIG)
509 cd ${KRNLCONFDIR}; \
1397f94a 510 PATH=${STRICTTMPPATH} \
984263bc
MD
511 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
512 ${KERNCONFDIR}/${_kernel}
513.endif
514.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
515 cd ${KRNLOBJDIR}/${_kernel}; \
516 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} -DNO_MODULES clean
517.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules)
518 cd ${KRNLOBJDIR}/${_kernel}; \
519 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} cleandir
520.endif
521.endif
522 cd ${KRNLOBJDIR}/${_kernel}; \
9f3906fd
MD
523 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
524 ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
984263bc
MD
525.if !defined(NO_KERNELDEPEND)
526 cd ${KRNLOBJDIR}/${_kernel}; \
527 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
528.endif
529 cd ${KRNLOBJDIR}/${_kernel}; \
530 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
531 @echo "--------------------------------------------------------------"
532 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
533 @echo "--------------------------------------------------------------"
534.endfor
535
536#
537# installkernel
538#
539# Install the kernel defined by INSTALLKERNEL
540#
541installkernel reinstallkernel:
542 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
543 ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
544
545#
546# update
547#
548# Update the source tree, by running sup and/or running cvs to update to the
549# latest copy.
550#
551update:
552.if defined(SUP_UPDATE)
553 @echo "--------------------------------------------------------------"
554 @echo ">>> Running ${SUP}"
555 @echo "--------------------------------------------------------------"
556.if defined(SUPFILE)
557 @${SUP} ${SUPFLAGS} ${SUPFILE}
558.endif
559.if defined(SUPFILE1)
560 @${SUP} ${SUPFLAGS} ${SUPFILE1}
561.endif
562.if defined(SUPFILE2)
563 @${SUP} ${SUPFLAGS} ${SUPFILE2}
564.endif
565.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
566 @${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
567.endif
568.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
569 @${SUP} ${SUPFLAGS} ${DOCSUPFILE}
570.endif
571.endif
572.if defined(CVS_UPDATE)
573 @echo "--------------------------------------------------------------"
574 @echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
575 @echo "--------------------------------------------------------------"
576 cd ${.CURDIR}; cvs -q update -rRELENG_4 -P -d
577.endif
578
579#
580# most
581#
582# Build most of the user binaries on the existing system libs and includes.
583#
584most:
585 @echo "--------------------------------------------------------------"
586 @echo ">>> Building programs only"
587 @echo "--------------------------------------------------------------"
588.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
589 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all
590.endfor
591
592#
593# installmost
594#
595# Install the binaries built by the 'most' target. This does not include
596# libraries or include files.
597#
598installmost:
599 @echo "--------------------------------------------------------------"
600 @echo ">>> Installing programs only"
601 @echo "--------------------------------------------------------------"
602.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
603 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install
604.endfor
605
606#
607# ------------------------------------------------------------------------
608#
609# From here onwards are utility targets used by the 'make world' and
610# related targets. If your 'world' breaks, you may like to try to fix
611# the problem and manually run the following targets to attempt to
612# complete the build. Beware, this is *not* guaranteed to work, you
613# need to have a pretty good grip on the current state of the system
614# to attempt to manually finish it. If in doubt, 'make world' again.
615#
616
1397f94a 617# bootstrap-tools: Build all tools required to build all tools.
984263bc 618#
17030342
MD
619# [x]install: dependancies on various new install features
620# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
621# envs are not compatible with older objformat binaries.
622#
984263bc
MD
623.if exists(${.CURDIR}/games) && !defined(NOGAMES)
624_strfile= games/fortune/strfile
625.endif
626
627bootstrap-tools:
1397f94a
MD
628.for _tool in ${_strfile} \
629 bin/chmod bin/cp bin/dd bin/mkdir bin/rm bin/echo bin/test \
630 bin/cat bin/date bin/ln bin/mv bin/csh bin/expr bin/sh bin/ls \
631 bin/hostname \
632 sbin/sysctl \
633 usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
634 usr.bin/m4 usr.bin/rpcgen usr.bin/make gnu/usr.bin/awk usr.bin/file \
635 usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
636 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
637 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
638 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
639 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et \
640 usr.bin/vi usr.bin/cap_mkdb usr.bin/vgrind usr.bin/true usr.bin/false \
c02263c2 641 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
1397f94a
MD
642 usr.sbin/chown usr.sbin/mtree usr.sbin/config \
643 usr.sbin/btxld usr.sbin/pwd_mkdb usr.sbin/zic \
644 gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo \
645 gnu/usr.bin/grep gnu/usr.bin/sort gnu/usr.bin/patch \
646 gnu/usr.bin/gzip gnu/usr.bin/perl gnu/usr.bin/man/makewhatis
647 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
984263bc
MD
648 cd ${.CURDIR}/${_tool}; \
649 ${MAKE} DIRPRFX=${_tool}/ obj; \
650 ${MAKE} DIRPRFX=${_tool}/ depend; \
651 ${MAKE} DIRPRFX=${_tool}/ all; \
1397f94a 652 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
984263bc
MD
653.endfor
654
17030342
MD
655# build-tools: Build special purpose build tools. gcc2 related tools are
656# only built under the i386 architecture. Other architectures are
657# gcc3-only.
984263bc 658#
1397f94a
MD
659# XXX we may be able to remove or consolidate this into bootstrap-tools
660# now that we have the native helper (.nx/.no) infrastructure.
661#
984263bc
MD
662.if exists(${.CURDIR}/games) && !defined(NOGAMES)
663_games= games/adventure games/hack games/phantasia
664.endif
665
666.if exists(${.CURDIR}/share) && !defined(NOSHARE)
667_share= share/syscons/scrnmaps
668.endif
669
17030342
MD
670_gcc3_cross= gnu/usr.bin/cc3
671_gcc3_tools= gnu/usr.bin/cc3/cc_tools
672.if ${MACHINE_ARCH} == "i386" && ${TARGET_ARCH} == "i386"
673_gcc2_cross= gnu/usr.bin/cc
674_gcc2_tools= gnu/usr.bin/cc/cc_tools
675_binutils= gnu/usr.bin/binutils gnu/usr.bin/binutils214
676.else
677_binutils= gnu/usr.bin/binutils214
678.endif
679
984263bc 680.if !defined(NO_FORTRAN)
17030342 681.if ${TARGET_ARCH} == "i386"
984263bc 682_fortran= gnu/usr.bin/cc/f771
17030342
MD
683.else
684_fortran= gnu/usr.bin/cc3/f771
685.endif
984263bc
MD
686.endif
687
688.if !defined(NOPERL)
689_perl= gnu/usr.bin/perl/miniperl
690.endif
691
984263bc
MD
692.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
693 !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
694_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
695 kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
696.endif
697
698.if defined(RELEASEDIR)
699_sysinstall= release/sysinstall
700.endif
701
702build-tools:
1397f94a 703.for _tool in ${_gcc2_tools} ${_gcc3_tools} \
17030342 704 ${_fortran} ${_perl} ${_libroken4} ${_libkrb5} \
1397f94a
MD
705 ${_share} ${_sysinstall}
706 ${ECHODIR} "===> ${_tool} (build-tools)"; \
984263bc
MD
707 cd ${.CURDIR}/${_tool}; \
708 ${MAKE} DIRPRFX=${_tool}/ obj; \
1397f94a
MD
709 ${MAKE} DIRPRFX=${_tool}/ depend; \
710 ${MAKE} DIRPRFX=${_tool}/ all; \
711 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
984263bc
MD
712.endfor
713
714#
715# cross-tools: Build cross-building tools
716#
717.if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
718_elf2exe= usr.sbin/elf2exe
719.endif
720
721.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
722_btxld= usr.sbin/btxld
723.endif
724
725cross-tools:
17030342
MD
726.for _tool in ${_btxld} ${_elf2exe} ${_binutils} \
727 usr.bin/objformat usr.sbin/crunch/crunchide \
728 ${_gcc2_cross} ${_gcc3_cross}
1397f94a 729 ${ECHODIR} "===> ${_tool} (cross-tools)"; \
984263bc
MD
730 cd ${.CURDIR}/${_tool}; \
731 ${MAKE} DIRPRFX=${_tool}/ obj; \
732 ${MAKE} DIRPRFX=${_tool}/ depend; \
733 ${MAKE} DIRPRFX=${_tool}/ all; \
1397f94a 734 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
984263bc
MD
735.endfor
736
737#
738# hierarchy - ensure that all the needed directories are present
739#
740hierarchy:
741 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
742
743#
744# libraries - build all libraries, and install them under ${DESTDIR}.
745#
746# The list of libraries with dependents (${_prebuild_libs}) and their
747# interdependencies (__L) are built automatically by the
748# ${.CURDIR}/tools/make_libdeps.sh script.
749#
5228fe46
MD
750# .makeenv does not work when bootstrapping from 4.x, so we must be sure
751# to specify the correct CCVER or 'cc' will not exec the correct compiler.
752#
984263bc
MD
753libraries:
754 cd ${.CURDIR}; \
5228fe46
MD
755 CCVER=gcc2 ${MAKE} -f Makefile.inc1 _startup_libs2; \
756 CCVER=gcc3 ${MAKE} -f Makefile.inc1 _startup_libs3; \
984263bc
MD
757 ${MAKE} -f Makefile.inc1 _startup_libs; \
758 ${MAKE} -f Makefile.inc1 _prebuild_libs; \
759 ${MAKE} -f Makefile.inc1 _generic_libs;
760
761# These dependencies are not automatically generated:
762#
763# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
5228fe46
MD
764# shared libraries for ELF. The targets for _startup_libs{2,3} are
765# specifically built using gcc{2,3}.
984263bc 766#
5228fe46
MD
767_startup_libs2= gnu/lib/gcc2/csu gnu/lib/gcc2/libgcc
768_startup_libs3= gnu/lib/gcc3/csu gnu/lib/gcc3/libgcc
aa8d5dcb
DR
769.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
770_startup_libs= lib/csu/${MACHINE_ARCH}-elf
984263bc 771.else
5228fe46 772_startup_libs= lib/csu/${MACHINE_ARCH}
984263bc 773.endif
1397f94a 774_startup_libs+= lib/libc
984263bc
MD
775
776_prebuild_libs=
777
778_generic_libs= gnu/lib
779
780.if !defined(NOPERL)
781_generic_libs+= gnu/usr.bin/perl/libperl
782.endif
783
784.if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
785_prebuild_libs+= kerberos5/lib/libasn1
786_prebuild_libs+= kerberos5/lib/libgssapi
787_prebuild_libs+= kerberos5/lib/libkrb5
788_prebuild_libs+= kerberos5/lib/libroken
789_generic_libs+= kerberos5/lib
790.endif
791
984263bc
MD
792_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
793 lib/libncurses lib/libopie lib/libradius lib/libskey \
794 lib/libtacplus lib/libutil \
795 lib/libz lib/msun
796
797lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
798lib/libskey__L: lib/libcrypt__L lib/libmd__L
799
800_generic_libs+= lib
801
de347b31 802.if !defined(NOCRYPT)
984263bc
MD
803.if !defined(NO_OPENSSL)
804_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
805.if !defined(NO_OPENSSH)
806_prebuild_libs+= secure/lib/libssh
807secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
808.endif
809.endif
810_generic_libs+= secure/lib
811.endif
812
813_generic_libs+= usr.bin/lex/lib
814
815.if ${MACHINE_ARCH} == "i386"
816_generic_libs+= usr.sbin/pcvt/keycap
817.endif
818
5228fe46
MD
819.for _lib in ${_startup_libs2} ${_startup_libs3} ${_startup_libs} \
820 ${_prebuild_libs} ${_generic_libs}
984263bc
MD
821${_lib}__L: .PHONY
822.if exists(${.CURDIR}/${_lib})
823 ${ECHODIR} "===> ${_lib}"; \
824 cd ${.CURDIR}/${_lib}; \
825 ${MAKE} DIRPRFX=${_lib}/ depend; \
826 ${MAKE} DIRPRFX=${_lib}/ all; \
827 ${MAKE} DIRPRFX=${_lib}/ install
828.endif
829.endfor
830
17030342
MD
831# only mess with gcc2 for i386 architectures.
832#
984263bc 833_startup_libs: ${_startup_libs:S/$/__L/}
17030342 834.if ${TARGET_ARCH} == "i386"
5228fe46 835_startup_libs2: ${_startup_libs2:S/$/__L/}
17030342
MD
836.else
837_startup_libs2:
838.endif
5228fe46 839_startup_libs3: ${_startup_libs3:S/$/__L/}
984263bc
MD
840_prebuild_libs: ${_prebuild_libs:S/$/__L/}
841_generic_libs: ${_generic_libs:S/$/__L/}
842
1397f94a
MD
843# library targets must be ordered because there are inter-library
844# races (e.g. generation of tconfig.h)
845#
846.ORDER: ${_startup_libs2:S/$/__L/}
847.ORDER: ${_startup_libs3:S/$/__L/}
848.ORDER: ${_startup_libs:S/$/__L/}
849.ORDER: ${_prebuild_libs:S/$/__L/}
850.ORDER: ${_generic_libs:S/$/__L/}
851
852.for __target in clean cleandepend cleandir obj depend includes
984263bc
MD
853.for entry in ${SUBDIR}
854${entry}.${__target}__D: .PHONY
855 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
856 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
857 edir=${entry}.${MACHINE_ARCH}; \
858 cd ${.CURDIR}/$${edir}; \
859 else \
860 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
861 edir=${entry}; \
862 cd ${.CURDIR}/$${edir}; \
863 fi; \
864 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
865.endfor
866par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
1397f94a 867.ORDER: ${SUBDIR:S/$/.${__target}__D/}
984263bc 868.endfor
1397f94a 869.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
984263bc 870
cb0f1574
MD
871# The wmake target is used by /usr/bin/wmake to run make in a
872# world build environment.
873#
874wmake:
1397f94a 875 @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}'
cb0f1574 876
5c7da0d7
MD
877wmakeenv:
878 @echo '${WMAKEENV} /bin/sh'
879
1397f94a
MD
880bmake:
881 @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}'
882
17030342
MD
883bmakeenv:
884 @echo '${BMAKEENV} /bin/sh'
885
1397f94a
MD
886tmake:
887 @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}'
888
17030342
MD
889tmakeenv:
890 @echo '${TMAKEENV} /bin/sh'
891
984263bc 892.include <bsd.subdir.mk>
cb0f1574 893