Place 'device acpica5' into the TINDERBOX kernel config so
[dragonfly.git] / sys / config / GENERIC
CommitLineData
984263bc 1#
8611e04d 2# GENERIC -- Generic kernel configuration file for DragonFly/i386
984263bc 3#
8611e04d
EN
4# For more information on this file, please read the FreeBSD handbook section
5# on Kernel Configuration Files:
984263bc
MD
6#
7# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
8#
984263bc
MD
9# An exhaustive list of options and more detailed explanations of the
10# device lines is also present in the ./LINT configuration file. If you are
11# in doubt as to the purpose or necessity of a line, check first in LINT.
12#
13# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.54 2003/04/28 03:41:46 simokawa Exp $
8611e04d 14# $DragonFly: src/sys/config/GENERIC,v 1.11 2004/04/05 13:44:40 eirikn Exp $
984263bc
MD
15
16machine i386
17cpu I386_CPU
18cpu I486_CPU
19cpu I586_CPU
20cpu I686_CPU
21ident GENERIC
22maxusers 0
23
1037a9ff 24makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
984263bc
MD
25
26options MATH_EMULATE #Support for x87 emulation
27options INET #InterNETworking
28options INET6 #IPv6 communications protocols
29options FFS #Berkeley Fast Filesystem
30options FFS_ROOT #FFS usable as root device [keep this!]
31options SOFTUPDATES #Enable FFS soft updates support
32options UFS_DIRHASH #Improve performance on big directories
33options MFS #Memory Filesystem
34options MD_ROOT #MD is a potential root device
35options NFS #Network Filesystem
36options NFS_ROOT #NFS usable as root device, NFS required
37options MSDOSFS #MSDOS Filesystem
38options CD9660 #ISO 9660 Filesystem
39options CD9660_ROOT #CD-ROM usable as root, CD9660 required
40options PROCFS #Process filesystem
41options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
42options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
43options UCONSOLE #Allow users to grab the console
44options USERCONFIG #boot -c editor
45options VISUAL_USERCONFIG #visual boot -c editor
46options KTRACE #ktrace(1) support
47options SYSVSHM #SYSV-style shared memory
48options SYSVMSG #SYSV-style message queues
49options SYSVSEM #SYSV-style semaphores
50options P1003_1B #Posix P1003_1B real-time extensions
51options _KPOSIX_PRIORITY_SCHEDULING
52options ICMP_BANDLIM #Rate limit bad replies
53options KBD_INSTALL_CDEV # install a CDEV entry in /dev
54options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
55 # output. Adds ~128k to driver.
56options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
57 # output. Adds ~215k to driver.
58
59# To make an SMP kernel, the next two are needed
60#options SMP # Symmetric MultiProcessor Kernel
61#options APIC_IO # Symmetric (APIC) I/O
62
1037a9ff
DR
63# Debugging for Development
64options DDB
65options INVARIANTS
66options INVARIANT_SUPPORT
67
68
69
984263bc
MD
70device isa
71device eisa
72device pci
73
74# Floppy drives
75device fdc0 at isa? port IO_FD1 irq 6 drq 2
76device fd0 at fdc0 drive 0
77device fd1 at fdc0 drive 1
78#
79# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
80# don't use the above line for fdc0 but the following one:
81#device fdc0
82
83# ATA and ATAPI devices
84device ata0 at isa? port IO_WD1 irq 14
85device ata1 at isa? port IO_WD2 irq 15
86device ata
87device atadisk # ATA disk drives
88device atapicd # ATAPI CDROM drives
89device atapifd # ATAPI floppy drives
90device atapist # ATAPI tape drives
a3e4c692 91device atapicam # Emulate ATAPI devices as SCSI via CAM
984263bc
MD
92options ATA_STATIC_ID #Static device numbering
93
94# SCSI Controllers
95device ahb # EISA AHA1742 family
96device ahc # AHA2940 and onboard AIC7xxx devices
97device ahd # AHA39320/29320 and onboard AIC79xx devices
98device amd # AMD 53C974 (Tekram DC-390(T))
99device isp # Qlogic family
100device mpt # LSI-Logic MPT/Fusion
101device ncr # NCR/Symbios Logic
102device sym # NCR/Symbios Logic (newer chipsets)
103options SYM_SETUP_LP_PROBE_MAP=0x40
104 # Allow ncr to attach legacy NCR devices when
105 # both sym and ncr are configured
106
107device adv0 at isa?
108device adw
109device bt0 at isa?
110device aha0 at isa?
111device aic0 at isa?
112
113device ncv # NCR 53C500
114device nsp # Workbit Ninja SCSI-3
115device stg # TMC 18C30/18C50
116
117# SCSI peripherals
118device scbus # SCSI bus (required)
119device da # Direct Access (disks)
120device sa # Sequential Access (tape etc)
121device cd # CD
122device pass # Passthrough device (direct SCSI access)
123
124# RAID controllers interfaced to the SCSI subsystem
125device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
126device dpt # DPT Smartcache - See LINT for options!
127device iir # Intel Integrated RAID
128device mly # Mylex AcceleRAID/eXtremeRAID
129device ciss # Compaq SmartRAID 5* series
130
131# RAID controllers
132device aac # Adaptec FSA RAID, Dell PERC2/PERC3
133#device aacp # SCSI passthrough for aac (requires CAM)
134device ida # Compaq Smart RAID
135device amr # AMI MegaRAID
136device mlx # Mylex DAC960 family
137device twe # 3ware Escalade
b7ebf86e 138device pst # Promise Supertrack
984263bc
MD
139
140# atkbdc0 controls both the keyboard and the PS/2 mouse
141device atkbdc0 at isa? port IO_KBD
142device atkbd0 at atkbdc? irq 1 flags 0x1
143device psm0 at atkbdc? irq 12
144
145device vga0 at isa?
146
147# splash screen/screen saver
148pseudo-device splash
149
150# syscons is the default console driver, resembling an SCO console
151device sc0 at isa? flags 0x100
152
153# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
154#device vt0 at isa?
155#options XSERVER # support for X server on a vt console
156#options FAT_CURSOR # start with block cursor
157# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
158#options PCVT_SCANSET=2 # IBM keyboards are non-std
159
160device agp # support several AGP chipsets
161
162# Floating point support - do not disable.
163device npx0 at nexus? port IO_NPX irq 13
164
165# Power management support (see LINT for more options)
166device apm0 at nexus? disable flags 0x20 # Advanced Power Management
167
168# PCCARD (PCMCIA) support
666d2603
JS
169device pccard
170device cardbus
171device cbb
984263bc
MD
172
173# Serial (COM) ports
174device sio0 at isa? port IO_COM1 flags 0x10 irq 4
175device sio1 at isa? port IO_COM2 irq 3
176device sio2 at isa? disable port IO_COM3 irq 5
177device sio3 at isa? disable port IO_COM4 irq 9
178
179# Parallel port
180device ppc0 at isa? irq 7
181device ppbus # Parallel port bus (required)
182device lpt # Printer
183device plip # TCP/IP over parallel
184device ppi # Parallel port interface device
185#device vpo # Requires scbus and da
186
187
188# PCI Ethernet NICs.
189device de # DEC/Intel DC21x4x (``Tulip'')
190device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
191device txp # 3Com 3cR990 (``Typhoon'')
192device vx # 3Com 3c590, 3c595 (``Vortex'')
193
194# PCI Ethernet NICs that use the common MII bus controller code.
195# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
196device miibus # MII bus support
7f186839 197device bfe # Broadcom BCM440x 10/100 Ethernet
984263bc
MD
198device dc # DEC/Intel 21143 and various workalikes
199device fxp # Intel EtherExpress PRO/100B (82557, 82558)
200device pcn # AMD Am79C97x PCI 10/100 NICs
201device rl # RealTek 8129/8139
202device sf # Adaptec AIC-6915 (``Starfire'')
203device sis # Silicon Integrated Systems SiS 900/SiS 7016
204device ste # Sundance ST201 (D-Link DFE-550TX)
205device tl # Texas Instruments ThunderLAN
206device tx # SMC EtherPower II (83c170 ``EPIC'')
207device vr # VIA Rhine, Rhine II
208device wb # Winbond W89C840F
209device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
210device bge # Broadcom BCM570x (``Tigon III'')
211
212# ISA Ethernet NICs.
213# 'device ed' requires 'device miibus'
214device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
215device ex
216device ep
217device fe0 at isa? disable port 0x300
218# Xircom Ethernet
219device xe
220# PRISM I IEEE 802.11b wireless NIC.
221device awi
222# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
223# exists only as a PCMCIA device, so there is no ISA attachment needed
224# and resources will always be dynamically assigned by the pccard code.
225device wi
226# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
227# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
228# mode (the factory default). If you set the switches on your ISA
229# card for a manually chosen I/O address and IRQ, you must specify
230# those parameters here.
231device an
232# The probe order of these is presently determined by i386/isa/isa_compat.c.
233device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
234#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
235device lnc0 at isa? disable port 0x280 irq 10 drq 0
236device cs0 at isa? disable port 0x300
237device sn0 at isa? disable port 0x300 irq 10
238
239# Pseudo devices - the number indicates how many units to allocate.
240pseudo-device loop # Network loopback
241pseudo-device ether # Ethernet support
242pseudo-device sl 1 # Kernel SLIP
243pseudo-device ppp 1 # Kernel PPP
244pseudo-device tun # Packet tunnel.
245pseudo-device pty # Pseudo-ttys (telnet etc)
246pseudo-device md # Memory "disks"
247pseudo-device gif # IPv6 and IPv4 tunneling
248pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
249
250# The `bpf' pseudo-device enables the Berkeley Packet Filter.
251# Be aware of the administrative consequences of enabling this!
252pseudo-device bpf #Berkeley packet filter
64b49742 253#options PFIL_HOOKS #Packetfilter hooks
984263bc
MD
254
255# USB support
256device uhci # UHCI PCI->USB interface
257device ohci # OHCI PCI->USB interface
258device usb # USB Bus (required)
259device ugen # Generic
260device uhid # "Human Interface Devices"
261device ukbd # Keyboard
262device ulpt # Printer
263device umass # Disks/Mass storage - Requires scbus and da
264device ums # Mouse
265device uscanner # Scanners
266device urio # Diamond Rio MP3 Player
267# USB Ethernet, requires mii
268device aue # ADMtek USB ethernet
269device cue # CATC USB ethernet
270device kue # Kawasaki LSI USB ethernet
271
272# FireWire support
273device firewire # FireWire bus code
274device sbp # SCSI over FireWire (Requires scbus and da)
275device fwe # Ethernet over FireWire (non-standard!)