rc.d: rename vfs_accounting to vfs_quota
[dragonfly.git] / etc / defaults / rc.conf
CommitLineData
984263bc
MD
1#!/bin/sh
2#
3
4# This is rc.conf - a file full of useful variables that you can set
5# to change the default startup behavior of your system. You should
6# not edit this file! Put any overrides into one of the ${rc_conf_files}
7# instead and you will be able to update these defaults later without
8# spamming your local configuration information.
9#
10# The ${rc_conf_files} files should only contain values which override
11# values set in this file. This eases the upgrade path when defaults
12# are changed and new features are added.
13#
14# All arguments must be in double or single quotes.
15#
9c600e7d 16# $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $
984263bc
MD
17
18##############################################################
19### Important initial Boot-time options ####################
20##############################################################
21
9c600e7d
MD
22rc_debug="NO" # Set to YES to enable debugging output from rc.d
23rc_info="YES" # Enables display of informational messages at boot.
24rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
984263bc
MD
25swapfile="NO" # Set to name of swapfile if aux swapfile desired.
26apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
27apmd_enable="NO" # Run apmd to handle APM event from userland.
28apmd_flags="" # Flags to apmd (if enabled).
48a120d3
LF
29battd_enable="NO" # Set to YES to have battd alert on 10% battery power remaining.
30battd_flags="" # Flags to battd (if enabled).
8861c912 31powerd_enable="NO" # Run powerd to adjust CPU speed.
eb3a3472
HT
32sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes.
33sensorsd_flags="" # additional flags for sensorsd(8).
01b70f3f
SW
34hotplugd_enable="NO" # Run hotplugd to monitor devices hot plugging.
35hotplugd_flags="" # additional flags for hotplugd(8)
984263bc 36pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
984263bc 37pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether
9c600e7d 38removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
a0aa3ee7 39local_startup="/usr/pkg/etc/rc.d /usr/local/etc/rc.d"
a9963945 40 # startup script dirs.
984263bc
MD
41script_name_sep=" " # Change if your startup scripts' names contain spaces
42rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
43fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
9c600e7d
MD
44netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
45extra_netfs_types="NO" # List of network extra filesystem types for delayed
46 # mount at startup (or NO).
b374f6d5
MS
47devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf"
48 # Config files for devfs(5)
984263bc
MD
49
50##############################################################
51### Network configuration sub-section ######################
52##############################################################
53
54### Basic network and firewall/security options: ###
fde62252
MD
55#
56# see 'man firewall' for an explanation of the default firewall rules
57#
984263bc
MD
58hostname="" # Set this!
59nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
9c600e7d
MD
60dhclient_program="/sbin/dhclient" # Path to dhcp client program.
61dhclient_flags="" # Additional flags to pass to dhcp client.
984263bc
MD
62firewall_enable="NO" # Set to YES to enable firewall functionality
63firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
64firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
fde62252
MD
65firewall_trusted_nets="192.168.0.0/16" # list of trusted nets
66firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0"
67firewall_allowed_icmp_types="0 3 8 11 12 13 14"
68firewall_open_tcp_ports="22 25 53 80 113 443"
69firewall_open_udp_ports="53"
984263bc
MD
70firewall_quiet="NO" # Set to YES to suppress rule display
71firewall_logging="NO" # Set to YES to enable events logging
72firewall_flags="" # Flags passed to ipfw when type is a file
73ip_portrange_first="NO" # Set first dynamically allocated port
74ip_portrange_last="NO" # Set last dynamically allocated port
75ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
76ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
77natd_program="/sbin/natd" # path to natd, if you want a different one.
78natd_enable="NO" # Enable natd (if firewall_enable == YES).
79natd_interface="" # Public interface or IPaddress to use.
80natd_flags="" # Additional flags for natd.
95cc27f0
JS
81pf_enable="NO" # Set to YES to enable packet filter (pf)
82pf_rules="/etc/pf.conf" # rules definition file for pf
1cee7797 83pf_program="/usr/sbin/pfctl" # where the pfctl program lives
95cc27f0
JS
84pf_flags="" # additional flags for pfctl
85pflog_enable="NO" # Set to YES to enable packet filter logging
4bf6ceae 86pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
1cee7797 87pflog_program="/usr/sbin/pflogd" # where the pflogd program lives
95cc27f0 88pflog_flags="" # additional flags for pflogd
984263bc
MD
89tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
90log_in_vain="0" # >=1 to log connects to ports w/o listeners.
91tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
92# For the following option you need to have TCP_DROP_SYNFIN set in your
93# kernel. Please refer to LINT and NOTES for details.
94tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
95 # NOTE: this violates the TCP specification
96icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
97icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
98network_interfaces="auto" # List of network interfaces (or "auto").
99cloned_interfaces="" # List of cloned network interfaces to create.
100#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
101ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
102#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
103#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
f26c267a 104#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
984263bc
MD
105#
106# If you have any sppp(4) interfaces above, you might also want to set
107# the following parameters. Refer to spppcontrol(8) for their meaning.
108sppp_interfaces="" # List of sppp interfaces.
9118151a
SW
109#sppp_interfaces="...0" # example: sppp over ...
110#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
984263bc
MD
111gif_interfaces="NO" # List of GIF tunnels (or "NO").
112#gif_interfaces="gif0 gif1" # Examples typically for a router.
113 # Choose correct tunnel addrs.
114#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
115#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
116
117# User ppp configuration.
118ppp_enable="NO" # Start user-ppp (or NO).
119ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
120 # For details see man page for ppp(8). Default is auto.
121ppp_nat="YES" # Use PPP's internal network address translation or NO.
122ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
123ppp_user="root" # Which user to run ppp as
124
125### Network daemon (miscellaneous) ###
5c8b08ff 126hostapd_enable="NO" # Run hostap daemon.
984263bc
MD
127syslogd_enable="YES" # Run syslog daemon (or NO).
128syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
8d5305b8
MD
129#syslogd_flags="-s" # Flags to syslogd (if enabled).
130syslogd_flags="-ss" # Syslogd flags to not bind an inet socket
9c600e7d 131inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
984263bc
MD
132inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
133inetd_flags="-wW" # Optional flags to inetd
984263bc 134
984263bc
MD
135rwhod_enable="NO" # Run the rwho daemon (or NO).
136rwhod_flags="" # Flags for rwhod
137rarpd_enable="NO" # Run rarpd (or NO).
138rarpd_flags="" # Flags to rarpd.
9c600e7d
MD
139bootparamd_enable="NO" # Run bootparamd (or NO).
140bootparamd_flags="" # Flags to bootparamd
984263bc
MD
141pppoed_enable="NO" # Run the PPP over Ethernet daemon.
142pppoed_provider="*" # Provider and ppp(8) config file entry.
143pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
144pppoed_interface="fxp0" # The interface that pppoed runs on.
145sshd_enable="NO" # Enable sshd
146sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
147sshd_flags="" # Additional flags for sshd.
148
830cb541
JS
149ftpd_enable="NO" # Run stand-alone ftp daemon (or NO).
150ftpd_flags="" # Flags for ftpd, -D added implicitly.
151
5586c53b
CP
152### Network File System (NFS): ###
153### Server-side options also need rpcbind_enable="YES" ###
d615ff4f
MD
154###
155### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If
156### the mtime matches the data cache is left intact.
157###
984263bc
MD
158amd_enable="NO" # Run amd service with $amd_flags (or NO).
159amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
160amd_map_program="NO" # Can be set to "ypcat -k amd.master"
161nfs_client_enable="NO" # This host is an NFS client (or NO).
d615ff4f
MD
162nfs_access_cache="5" # Client attribute cache timeout in seconds
163#nfs_neg_cache="3" # Client attribute negative hit cache timeout
984263bc
MD
164nfs_server_enable="NO" # This host is an NFS server (or NO).
165nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
9c600e7d 166mountd_enable="NO" # Run mountd (or NO).
984263bc
MD
167mountd_flags="-r" # Flags to mountd (if NFS server enabled).
168weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
169nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
170nfs_bufpackets="" # bufspace (in packets) for client
9c600e7d 171rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
ce0e08e2 172rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
9c600e7d 173rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
ce0e08e2 174rpc_statd_flags="" # Flags to rpc.statd (if enabled).
72067a39 175rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown
9c600e7d 176rpcbind_enable="NO" # Run the portmapper service (YES/NO).
ce0e08e2 177rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
9c600e7d 178rpcbind_flags="" # Flags to rpcbind (if enabled).
984263bc
MD
179rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
180keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
181keyserv_flags="" # Flags to keyserv (if enabled).
182
183### Network Time Services options: ###
184timed_enable="NO" # Run the time daemon (or NO).
185timed_flags="" # Flags to timed (if enabled).
34b25456
RG
186dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO).
187dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one.
188dntpd_flags="" # Flags to dntpd (if enabled) also server name(s)
984263bc 189
5e2415d8 190# Bluetooth deamons and options:
5f834906
SW
191btconfig_enable="NO" # Configure Bluetooth devices (or NO).
192btconfig_devices="" # List of Bluetooth devices (or empty for all).
193#btconfig_<device>="" # Parameters to pass to <device>.
194btconfig_args="" # Parameters to pass to all devices.
195sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO).
196sdpd_flags="" # Flags to sdpd (if enabled).
ec4e37b7
HT
197bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO).
198bthcid_flags="" # Flags to bthcid (if enabled).
5e2415d8 199
9c600e7d 200# Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
984263bc
MD
201nis_client_enable="NO" # We're an NIS client (or NO).
202nis_client_flags="" # Flags to ypbind (if enabled).
203nis_ypset_enable="NO" # Run ypset at boot time (or NO).
204nis_ypset_flags="" # Flags to ypset (if enabled).
205nis_server_enable="NO" # We're an NIS server (or NO).
206nis_server_flags="" # Flags to ypserv (if enabled).
207nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
208nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
209nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
210nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
211
212### Network routing options: ###
213defaultrouter="NO" # Set to default gateway (or NO).
214static_routes="" # Set to static route list (or leave empty).
215gateway_enable="NO" # Set to YES if this host will be a gateway.
216router_enable="NO" # Set to YES to enable a routing daemon.
221b91ff 217router_program="/sbin/routed" # Name of routing daemon to use if enabled.
984263bc
MD
218router_flags="-q" # Flags for routing daemon.
219mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
220mrouted_flags="" # Flags for multicast routing daemon.
221ipxgateway_enable="NO" # Set to YES to enable IPX routing.
222ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
223ipxrouted_flags="" # Flags for IPX routing daemon.
224arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
225forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
226accept_sourceroute="NO" # accept source routed packets to us
227
228### ATM interface options: ###
229atm_enable="NO" # Configure ATM interfaces (or NO).
230#atm_netif_hea0="atm 1" # Network interfaces for physical interface.
231#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
232#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
233#atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
234#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
235#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
984263bc
MD
236atm_arps="" # Set to permanent ARP list (or leave empty).
237
984263bc
MD
238### Miscellaneous network options: ###
239icmp_bmcastecho="NO" # respond to broadcast ping packets
240
241### IPv6 options: ###
242ipv6_enable="NO" # Set to YES to set up for IPv6.
243ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
244ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
245#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
246ipv6_static_routes="" # Set to static route list (or leave empty).
247#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
248 # route toward loopback interface.
249#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
250ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
251ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
221b91ff 252ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
984263bc
MD
253ipv6_router_flags="" # Flags to IPv6 routing daemon.
254#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
255 # addrs.
256#ipv6_router_flags="-q" # If you want to run a routing daemon on an end
257 # node, you should stop advertisement.
258#ipv6_network_interfaces="ed0 ep0" # Examples for router
259 # or static configuration for end node.
260 # Choose correct prefix value.
261#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
262#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
263#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
264#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
265ipv6_default_interface="NO" # Default output interface for scoped addrs.
266 # Now this works only for IPv6 link local
267 # multicast addrs.
268rtadvd_enable="NO" # Set to YES to enable an IPv6 router
269 # advertisement daemon. If set to YES,
270 # this router becomes a possible candidate
271 # IPv6 default router for local subnets.
272rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
ad378d3f
JS
273rtsold_enable="NO" # Set to YES to enable an IPv6 routing
274 # solicitation daemon. This is used for
275 # automatic discovery of non-link local
276 # addresses.
277rtsold_flags="-a" # Do autoprobing of outgoing interface.
984263bc
MD
278mroute6d_enable="NO" # Do IPv6 multicast routing.
279mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
280 # routing daemon. You need to
281 # install it from package or
282 # port.
283mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
284stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
285 # tunneling interface. Specify this entry
286 # to enable 6to4 interface.
287stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
288 # to limit peer addr range. Effective value
289 # is 0-31.
290stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
291 # If you like, you can set "AUTO" for this.
292stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
293ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
294 # IPv6-to-IPv4 TCP translator. You also need
295 # faithd(8) setup.
9c600e7d 296ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
984263bc
MD
297 # communication. (like ::ffff:a.b.c.d)
298ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
299 # functionality
300ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
301ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
302ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
303ipv6_firewall_logging="NO" # Set to YES to enable events logging
304ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
984263bc
MD
305
306##############################################################
307### System console options #################################
308##############################################################
309
310keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
311keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
9c600e7d 312keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
984263bc
MD
313keychange="NO" # function keys default values (or NO).
314cursor="NO" # cursor type {normal|blink|destructive} (or NO).
315scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
316font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
317font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
318font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
319blanktime="300" # blank time (in seconds) or "NO" to turn it off.
2e7cfdc9 320saver="NO" # screen saver: Uses /modules/${saver}_saver.ko
984263bc
MD
321moused_enable="NO" # Run the mouse daemon.
322moused_type="auto" # See man page for rc.conf(5) for available settings.
323moused_port="/dev/psm0" # Set to your mouse port.
324moused_flags="" # Any additional flags to moused.
9c600e7d 325mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
984263bc
MD
326 # language code table, specify alternative range
327 # start like mousechar_start=3, see vidcontrol(1)
38f96ee6 328vidhistory="" # Set video history buffer size
984263bc
MD
329allscreens_flags="" # Set this vidcontrol mode for all virtual screens
330allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
331
332
333##############################################################
334### Mail Transfer Agent (MTA) options ######################
335##############################################################
336
337mta_start_script="/etc/rc.sendmail"
338 # Script to start your chosen MTA, called by /etc/rc.
339# Settings for /etc/rc.sendmail:
9c600e7d 340sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
984263bc
MD
341sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
342sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
343sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
344 # Flags for localhost-only MTA
345sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
346sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
347sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
348sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
349 # Flags for sendmail_msp_queue daemon.
03e2a3c5 350sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO).
984263bc
MD
351
352
353##############################################################
354### Miscellaneous administrative options ###################
355##############################################################
356
2231736b 357mixer_enable="NO" # Manage mixer settings across reboots
984263bc
MD
358cron_enable="YES" # Run the periodic job daemon.
359cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
360cron_flags="" # Which options to pass to the cron daemon.
361lpd_enable="NO" # Run the line printer daemon.
362lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
363lpd_flags="" # Flags to lpd (if enabled).
ed5d5720 364nscd_enable="NO" # Run the nsswitch caching daemon.
984263bc
MD
365usbd_enable="NO" # Run the usbd daemon.
366usbd_flags="" # Flags to usbd (if enabled).
71fc104f
HT
367devd_enable="NO" # Rund devd(8) daemon.
368devd_flags="" # Flags to devd(8) (if enabled).
984263bc
MD
369dumpdev="NO" # Device name to crashdump to (or NO).
370dumpdir="/var/crash" # Directory where crash dumps are to be stored
371savecore_flags="" # Used if dumpdev is enabled above, and present.
7fb3111b
AH
372crashinfo_enable="YES" # Automatically generate crash dump summary.
373crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
984263bc
MD
374enable_quotas="NO" # turn on quotas on startup (or NO).
375check_quotas="YES" # Check quotas on startup (or NO).
376accounting_enable="NO" # Turn on process accounting (or NO).
9c600e7d 377sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
984263bc 378linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
984263bc
MD
379clear_tmp_enable="NO" # Clear /tmp at startup.
380ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
b519f37f 381ldconfig_paths="/usr/lib /usr/lib/compat /usr/pkg/lib /usr/local/lib"
984263bc 382 # shared library search paths
984263bc
MD
383kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
384update_motd="YES" # update version info in /etc/motd (or NO)
385start_vinum="NO" # set to YES to start vinum
0e132b2a 386udevd_enable="NO" # Run udevd(8) daemon.
370f4859 387udevd_early="NO" # Run udevd(8) daemon early in boot (for lvm).
0e132b2a 388lvm_enable="NO" # Run LVM volume discovery.
af1321ae 389rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
9c600e7d 390dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
842eea5b
SW
391newsyslog_enable="NO" # Run newsyslog at startup.
392newsyslog_flags="" # Flags to newsyslog (if enabled).
b58abc5e
SW
393resident_enable="NO" # Process /etc/resident.conf
394varsym_enable="NO" # Process /etc/varsym.conf
395watchdogd_enable="NO" # Start the software watchdog daemon
396
397##############################################################
398### Jail Configuration #######################################
399##############################################################
400
9c600e7d
MD
401jail_enable="NO" # Set to NO to disable starting of any jails
402jail_list="" # Space separated list of names of jails
403jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
404jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
b58abc5e
SW
405jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
406
407#
408# To use rc's built-in jail infrastructure create entries for
409# each jail, specified in jail_list, with the following variables.
410# NOTES:
411# - replace 'example' with the jail's name.
412# - except rootdir, hostname and ip, all of the following variables may be made
413# global jail variables if you don't specify a jail name (ie. jail_interface).
414#
415#jail_example_rootdir="/usr/jail/default" # Jail's root directory
416#jail_example_hostname="default.domain.com" # Jail's hostname
417#jail_example_ip="192.168.0.10" # Jail's IP number
418#jail_example_interface="" # Interface to create the IP alias on
419#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
420#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
421#jail_example_fdesc_enable="NO" # mount fdesc in the jail
422#jail_example_procfs_enable="NO" # mount procfs in jail
007ff2f8 423#jail_example_devfs_enable="NO" # mount devfs in jail
b58abc5e
SW
424#jail_example_mount_enable="NO" # mount/umount jail's fs
425#jail_example_fstab="" # fstab(5) for mount/umount
426#jail_example_flags="-l -U root" # flags for jail(8)
984263bc
MD
427
428##############################################################
7f180e19 429### VFS quota options #######################################
26b35e7c
FT
430##############################################################
431
7f180e19
FT
432vfs_quota_enable="NO" # Set to YES to enable handling of these vfs quota options
433vfs_quota_sync="" # Space separated list of mount points or "NO"
26b35e7c
FT
434
435##############################################################
2feb07f7
SW
436### VKernel options #########################################
437##############################################################
438
439vkernel_enable="NO" # Set to YES to enable starting of vkernels
440vkernel_list="" # Space separated list of names of vkernels
2214b591 441#vkernel_bin="/boot/kernel.VKERNEL" # Default path to the vkernel binary
7c53feed 442#vkernel_kill_timeout="45" # Default timeout before a SIGKILL is issued
2feb07f7 443
c4740fdf
AHJ
444vknetd_enable="NO" # Bridged networking
445vknetd_flags="-U" # Bridged networking flags
2feb07f7
SW
446#
447# Create an entry for each vkernel specified in vkernel_list
448# replacing 'example' by the name of the vkernel.
449#
450#vkernel_example_bin="/boot/kernel.VKERNEL"
451 # Path to the vkernel binary
452#vkernel_example_memsize="64m"
453 # Amount of memory for the vkernel
454#vkernel_example_rootimg_list="/var/vkernel/rootimg.01"
455 # Space separated list of disk images
456#vkernel_example_iface_list="auto:bridge0"
457 # Optional: space separated list network interfaces for the vkernel
458#vkernel_example_logfile="/dev/null"
459 # Optional: path to the console log file
460#vkernel_example_flags="-U"
461 # Optional: aditional flags to start the vkernel with
7c53feed
R
462#vkernel_example_kill_timeout="45"
463 # Optional: timeout before SIGKILL is issued when stopping the vkernel
2feb07f7
SW
464
465##############################################################
984263bc
MD
466### Define source_rc_confs, the mechanism used by /etc/rc.* ##
467### scripts to source rc_conf_files overrides safely. ##
468##############################################################
469
470if [ -z "${source_rc_confs_defined}" ]; then
471 source_rc_confs_defined=yes
472 source_rc_confs () {
473 local i sourced_files
474 for i in ${rc_conf_files}; do
475 case ${sourced_files} in
476 *:$i:*)
477 ;;
478 *)
479 sourced_files="${sourced_files}:$i:"
480 if [ -r $i ]; then
481 . $i
482 fi
483 ;;
484 esac
485 done
486 }
487fi