Add a temporary hack to avoid the local files to be picked up.
[dragonfly.git] / etc / defaults / make.conf
CommitLineData
984263bc 1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $
1836e9c8 2# $DragonFly: src/etc/defaults/make.conf,v 1.8 2004/08/12 08:08:06 dillon Exp $
984263bc
MD
3#
4# NOTE: Please would any committer updating this file also update the
5# make.conf(5) manual page, if necessary, which is located in
6# src/share/man/man5/make.conf.5.
7#
8# This file, if present, will be read by make (see /usr/share/mk/sys.mk).
9# It allows you to override macro definitions to make without changing
10# your source tree, or anything the source tree installs.
11#
12# This file must be in valid Makefile syntax.
13#
14# You have to find the things you can put here in the Makefiles and
15# documentation of the source tree.
16#
17#
18# The CPUTYPE variable controls which processor should be targeted for
19# generated code. This controls processor-specific optimizations in
20# certain code (currently only OpenSSL) as well as modifying the value
21# of CFLAGS to contain the appropriate optimization directive to gcc.
22# The automatic setting of CFLAGS may be overridden using the
23# NO_CPU_CFLAGS variable below.
24# Currently the following CPU types are recognized:
25# Intel x86 architecture:
26# (AMD CPUs) k7 k6-2 k6 k5
27# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386
28# Alpha/AXP architecture: ev6 pca56 ev56 ev5 ev45 ev4
29#
30# If you experience any problems after setting this flag, please unset
31# it again before submitting a bug report or attempting to modify code.
32# It may be that certain types of software will become unstable after being
33# compiled with processor-specific (or higher - see below) optimization flags.
34# If in doubt, do not set CPUTYPE or CFLAGS to non-default values.
35#
36#CPUTYPE=i686
37#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically
38#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically
39#
dfa77fe6
MD
40# The CCVER variable controls which GCC-version to use by default. It
41# should be set using ?= so as not to interfere with CCVER overrides from
42# userland or the buildworld. We currently recommend that an override NOT
43# be set in /etc/make.conf and that gcc 3.4 not yet be used to build the boot
44# blocks, boot loader, or the kernel.
45#
46# CCVER?=gcc2 (use GCC 2.95.x, default)
47# CCVER?=gcc34 (use GCC 3.4, experimental)
48#
49#
984263bc
MD
50# CFLAGS controls the compiler settings used when compiling C code.
51# Note that optimization settings above -O (-O2, ...) are not recommended
52# or supported for compiling the world or the kernel - please revert any
53# nonstandard optimization settings to "-O" before submitting bug reports
54# to the developers.
55# Note also that at this time the -O2 setting is known to produce BROKEN
56# CODE on the Alpha platform.
57#
58#CFLAGS= -O -pipe
59#
60# CXXFLAGS controls the compiler settings used when compiling C++ code.
61# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish
62# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "="
63# alone will remove the often needed contents of CFLAGS from CXXFLAGS.
64#
65#CXXFLAGS+= -fmemoize-lookups -fsave-memoized
66#
67# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested
68# for use in developing FreeBSD and testing changes. They can be used by
69# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not
70# included here due to compiler bugs, e.g., mkdir()'s mode_t argument.
71#
72BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \
73 -Wcast-qual -Wchar-subscripts -Winline \
74 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
75 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings
76#
77# WARNS_WERROR causes -Werror to be added when WARNS is in effect.
78#
79#WARNS_WERROR= yes
80#
81# To compile just the kernel with special optimizations, you should use
82# this instead of CFLAGS (which is not applicable to kernel builds anyway).
83# There is very little to gain by using higher optimization levels, and doing
84# so can cause problems.
85#
86#COPTFLAGS= -O -pipe
87#
88# Compare before install
89#INSTALL=install -C
90#
91# To enable installing suidperl with the setuid bit turned on
92#ENABLE_SUIDPERL= true
93#
94# To build ppp with normal permissions
95#PPP_NOSUID= true
96#
97# To enable installing ssh(1) with the setuid bit turned on
98#ENABLE_SUID_SSH= true
99#
100# To avoid building various parts of the base system:
101#NO_CVS= true # do not build CVS
102#NO_BIND= true # do not build BIND
103#NO_FORTRAN= true # do not build g77 and related libraries
104#NO_I4B= true # do not build isdn4bsd package
105#NO_IPFILTER= true # do not build IP Filter package
106#NO_LPR= true # do not build lpr and related programs
107#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector
108#NO_MODULES= true # do not build modules with the kernel
109#NO_OBJC= true # do not build Objective C support
110#NO_OPENSSH= true # do not build OpenSSH
111#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH)
112#NO_SENDMAIL= true # do not build sendmail and related programs
113#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs
984263bc
MD
114#NO_X= true # do not compile in XWindows support (e.g. doscmd)
115#NOCRYPT= true # do not build any crypto code
116#NOGAMES= true # do not build games (games/ subdir)
117#NOINFO= true # do not make or install info files
118#NOLIBC_R= true # do not build libc_r (re-entrant version of libc)
119#NOMAN= true # do not build manual pages
120#NOPERL= true # do not build perl. Disables OpenSSL optimizations
121#NOPROFILE= true # Avoid compiling profiled libraries
984263bc 122#NOSHARE= true # do not go into the share subdir
984263bc
MD
123#
124# To build sys/modules when building the world (our old way of doing things)
125#MODULES_WITH_WORLD=true # do not build modules when building kernel
126#
127# The list of modules to build instead of all of them.
fdd814c0 128#MODULES_OVERRIDE= emulation/linux net/ipfw
984263bc
MD
129#
130# The following controls building optional IDEA code in libcrypto and
131# certain ports. Patents are involved - you must not use this unless
132# you either have a license or fall within patent 'fair use'
133# provisions.
134#
135# *** It is YOUR RESPONSIBILITY to determine if you can use this! ***
136#
137# IDEA is patented in the USA and many European countries - thought to
138# be OK to use for any non-commercial use. This is optional.
139#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption)
140#
141# To avoid running MAKEDEV all on /dev during install:
142#NO_MAKEDEV= true
143#
144# If you do not want unformatted manual pages to be compressed
145# when they are installed:
146#
147#NOMANCOMPRESS= true
148#
149#
150# If you want the "compat" shared libraries installed as part of your normal
151# builds, uncomment these:
152#
153#COMPAT1X= yes
154#COMPAT20= yes
155#COMPAT21= yes
156#COMPAT22= yes
157#COMPAT3X= yes
158#COMPAT4X= yes
159#
160#
161# If you do not want additional documentation (some of which are
162# a few hundred KB's) for ports to be installed:
163#
164#NOPORTDOCS= true
165#
166#
167# Default format for system documentation, depends on your printer.
168# Set this to "ascii" for simple printers or screen
169#
170#PRINTERDEVICE= ps
171#
172#
173# How long to wait for a console keypress before booting the default kernel.
174# This value is approximately in milliseconds. Keypresses are accepted by the
175# BIOS before booting from disk, making it possible to give custom boot
176# parameters even when this is set to 0.
177#
178#BOOTWAIT=0
179#BOOTWAIT=30000
180#
181# By default, the system will always use the keyboard/video card as system
182# console. However, the boot blocks may be dynamically configured to use a
183# serial port in addition to or instead of the keyboard/video console.
184#
185# By default we use COM1 as our serial console port *if* we're going to use
186# a serial port as our console at all. Alter as necessary.
187#
188# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
189#
190#BOOT_COMCONSOLE_PORT= 0x3F8
191#
192# The default serial console speed is 9600. Set the speed to a larger value
193# for better interactive response.
194#
195#BOOT_COMCONSOLE_SPEED= 115200
196#
197# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining
198# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel
199# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet
200# still mount the server's '/' (i.e. rather than load the server's kernel).
201#
202#LOADER_TFTP_SUPPORT= YES
203#
204# By default, the ports collection attempts to use XFree86 4.X. If
205# you are running XFree86 3.3.X, uncomment this line.
206#
207#XFREE86_VERSION= 3
208#
209# By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier.
210# If you have a XFree86 from before 3.0 that has the X distribution in
211# /usr/X386, you want to uncomment this.
212#
213#X11BASE= /usr/X386
214#
215#
216# If you have Motif on your system, uncomment this.
217#
218#HAVE_MOTIF= yes
219#MOTIF_STATIC= yes
220#
221# If the default location of the Motif library (specified below) is NOT
222# appropriate for you, uncomment this and change it to the correct value.
223# If your motif is in ${X11BASE}/lib, you don't need to touch this line.
224#
225#MOTIFLIB= -L${X11BASE}/lib -lXm
226#
227#
228# If you're resident in the USA, this will help various ports to determine
229# whether or not they should attempt to comply with the various U.S.
230# export regulations on certain types of software which do not apply to
231# anyone else in the world.
232#
233#USA_RESIDENT= YES
234#
235#
236# Override "don't install a port that's already installed" behavior.
237# One might wish to do this for ports debugging or to unconditionally
238# reinstall a set of suspect/broken ports.
239#
240#FORCE_PKG_REGISTER= YES
241#
242#
243# If you're behind a firewall and need FTP or HTTP proxy services for
244# ports collection fetching to work, the following examples give the
245# necessary syntax. See the fetch(3) man page for details.
246#
247#FETCH_ENV= FTP_PROXY=ftp://10.0.0.1:21
248#FETCH_ENV= HTTP_PROXY=http://10.0.0.1:80
249#
250#
251# Port master sites.
252#
253# If you want your port fetches to go somewhere else than the default
254# (specified below) in case the distfile/patchfile was not found,
255# uncomment this and change it to a location nearest you. (Don't
256# remove the "/${DIST_SUBDIR}/" part.)
257#
258#MASTER_SITE_BACKUP?= \
259# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
260#
261# If you want your port fetches to check the above site first (before
262# the MASTER_SITES specified in the port Makefiles), uncomment the
263# line below. You can also change the right side to point to wherever
264# you want.
265#
266#MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP}
267#
268# Some ports use a special variable to point to a collection of
269# mirrors of well-known software archives. If you have a mirror close
270# to you, uncomment any of the following lines and change it to that
271# address. (Don't remove the "/%SUBDIR%/" part.)
272#
273# Note: the right hand sides of the following lines are only for your
274# information. For a full list of default sites, take a look at
275# bsd.sites.mk.
276#
277#MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/
278#MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/
279#MASTER_SITE_FREEBSD_ORG= ftp://ftp.FreeBSD.org/pub/FreeBSD/%SUBDIR%/
280#MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/%SUBDIR%/
281#MASTER_SITE_GNU= ftp://ftp.gnu.org/gnu/%SUBDIR%/
282#MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/
283#MASTER_SITE_LOCAL= ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/%SUBDIR%/
284#MASTER_SITE_MOZILLA= ftp://ftp.mozilla.org/pub/%SUBDIR%/
285#MASTER_SITE_NETBSD= ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/%SUBDIR%/
286#MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/
287#MASTER_SITE_PORTS_JP= ftp://ports.jp.FreeBSD.org/pub/FreeBSD-jp/ports-jp/LOCAL_PORTS/%SUBDIR%/
288#MASTER_SITE_RINGSERVER= ftp://ftp.dnsbalance.ring.gr.jp/pub/%SUBDIR%/
289#MASTER_SITE_RUBY= ftp://ftp.ruby-lang.org/pub/ruby/%SUBDIR%/
290#MASTER_SITE_SOURCEFORGE= ftp://ftp2.sourceforge.net/pub/sourceforge/%SUBDIR%/
291#MASTER_SITE_SOURCEWARE= ftp://ftp.freesoftware.com/pub/sourceware/%SUBDIR%/
292#MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/
293#MASTER_SITE_TCLTK= ftp://ftp.scriptics.com/pub/tcl/%SUBDIR%/
294#MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/
295#MASTER_SITE_THEMES= ftp://ftp.themes.org/pub/themes/%SUBDIR%/
296#MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/
297#MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/
298#MASTER_SITE_XEMACS= ftp://ftp.xemacs.org/pub/xemacs/%SUBDIR%/
299#MASTER_SITE_XFREE= ftp://ftp.xfree86.org/pub/XFree86/%SUBDIR%/source/
300#
301# Also it is highly recommended that you configure MASTER_SORT_REGEX
302# to choose better mirror sites for you. List awk(1)-style regular
303# expressions separated by space so MASTER_SITES will be sorted in
304# that order. The following example is for Japanese users; change
305# "jp" part to your ccTLD ("de", "ru", "uk", etc.) or the domain names
306# of your nearest/upstream networks to meet your needs.
307#
308#MASTER_SORT_REGEX?= ://[^/]*\.jp[/.]
309#
310# Ports can place their working directories somewhere other than under
311# /usr/ports.
312#WRKDIRPREFIX= /var/tmp
313#
984263bc
MD
314# Kerberos 5
315# If you want Kerberos 5 (KTH Heimdal), define this:
316#
317#MAKE_KERBEROS5= yes
318#
319# Kerberos 5 su (k5su)
320# If you want to use the k5su utility, define this to have it installed
321# set-user-ID.
322#ENABLE_SUID_K5SU= yes
323#
324#
325# Kerberos5
326# If you want to install MIT Kerberos5 port somewhere other than /usr/local,
327# define this (this is also used to tell ssh1 that kerberos is needed):
328#
329#KRB5_HOME= /usr/local
330#
331#
332# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution
333# file(s) you use on your site (see /usr/share/examples/cvsup/README for more
334# information on CVSup and these files). To use, do "make update" in /usr/src.
335#
336#SUP_UPDATE= yes
337#
338#SUP= /usr/local/bin/cvsup
339#SUPFLAGS= -g -L 2
340#SUPHOST= cvsup.uk.FreeBSD.org
341#SUPFILE= /usr/share/examples/cvsup/stable-supfile
342#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile
343#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile
344#
345# top(1) uses a hash table for the user names. The size of this hash
346# can be tuned to match the number of local users. The table size should
347# be a prime number approximately twice as large as the number of lines in
348# /etc/passwd. The default number is 20011.
349#
350#TOP_TABLE_SIZE= 101
351#
352# Documentation
353#
354# The list of languages and encodings to build and install
355#
356#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R
357#
358#
359# sendmail
360#
361# The following sets the default m4 configuration file to use at
362# install time. Use with caution as a make install will overwrite
363# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now
364# deprecated. The value should be a fully qualified path name.
365# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
366# create /etc/mail/sendmail.cf before installworld installs an
367# updated sendmail binary.
368#
369#SENDMAIL_MC=/etc/mail/myconfig.mc
370#
371# The following sets the default m4 configuration file for mail
372# submission to use at install time. Use with caution as a make
373# install will overwrite any existing /etc/mail/submit.cf. The
374# value should be a fully qualified path name.
375# Avoid using a value of /etc/mail/submit.mc as a buildworld will
376# create /etc/mail/submit.cf before installworld installs an
377# updated sendmail binary.
378#
379#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
380#
381# If you need to build additional .cf files during a make buildworld,
382# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC.
383# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
384# create /etc/mail/sendmail.cf before installworld installs an
385# updated sendmail binary.
386#
387#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc
388#
389# Setting the following variable modifies the flags passed to m4 when
390# building a .cf file from a .mc file. It can be used to enable
391# features disabled by default.
392#
393#SENDMAIL_M4_FLAGS=
394#
395# Setting the following variables modifies the build environment for
396# sendmail and its related utilities. For example, SASL support can be
397# added with settings such as:
398#
399# with SASLv1:
400# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL
401# SENDMAIL_LDFLAGS=-L/usr/local/lib
402# SENDMAIL_LDADD=-lsasl
403#
404# with SASLv2:
405# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
406# SENDMAIL_LDFLAGS=-L/usr/local/lib
407# SENDMAIL_LDADD=-lsasl2
408#
409# Note: If you are using Cyrus SASL with other applications which require
410# access to the sasldb file, you should add the following to your
411# sendmail.mc file:
412#
413# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')
414#
415#SENDMAIL_CFLAGS=
416#SENDMAIL_LDFLAGS=
417#SENDMAIL_LDADD=
418#SENDMAIL_DPADD=
419#
420# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a
421# set-user-ID root binary instead of a set-group-ID smmsp binary and will
422# prevent the installation of /etc/mail/submit.cf.
423# This is a deprecated mode of operation. See etc/mail/README for more
424# information.
425#
426#SENDMAIL_SET_USER_ID=
427#
428# The permissions to use on alias and map databases generated using
429# /etc/mail/Makefile. Defaults to 0640.
430#
431#SENDMAIL_MAP_PERMS=