Initial import from FreeBSD RELENG_4:
[dragonfly.git] / etc / defaults / make.conf
CommitLineData
984263bc
MD
1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $
2#
3# NOTE: Please would any committer updating this file also update the
4# make.conf(5) manual page, if necessary, which is located in
5# src/share/man/man5/make.conf.5.
6#
7# This file, if present, will be read by make (see /usr/share/mk/sys.mk).
8# It allows you to override macro definitions to make without changing
9# your source tree, or anything the source tree installs.
10#
11# This file must be in valid Makefile syntax.
12#
13# You have to find the things you can put here in the Makefiles and
14# documentation of the source tree.
15#
16#
17# The CPUTYPE variable controls which processor should be targeted for
18# generated code. This controls processor-specific optimizations in
19# certain code (currently only OpenSSL) as well as modifying the value
20# of CFLAGS to contain the appropriate optimization directive to gcc.
21# The automatic setting of CFLAGS may be overridden using the
22# NO_CPU_CFLAGS variable below.
23# Currently the following CPU types are recognized:
24# Intel x86 architecture:
25# (AMD CPUs) k7 k6-2 k6 k5
26# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386
27# Alpha/AXP architecture: ev6 pca56 ev56 ev5 ev45 ev4
28#
29# If you experience any problems after setting this flag, please unset
30# it again before submitting a bug report or attempting to modify code.
31# It may be that certain types of software will become unstable after being
32# compiled with processor-specific (or higher - see below) optimization flags.
33# If in doubt, do not set CPUTYPE or CFLAGS to non-default values.
34#
35#CPUTYPE=i686
36#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically
37#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically
38#
39# CFLAGS controls the compiler settings used when compiling C code.
40# Note that optimization settings above -O (-O2, ...) are not recommended
41# or supported for compiling the world or the kernel - please revert any
42# nonstandard optimization settings to "-O" before submitting bug reports
43# to the developers.
44# Note also that at this time the -O2 setting is known to produce BROKEN
45# CODE on the Alpha platform.
46#
47#CFLAGS= -O -pipe
48#
49# CXXFLAGS controls the compiler settings used when compiling C++ code.
50# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish
51# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "="
52# alone will remove the often needed contents of CFLAGS from CXXFLAGS.
53#
54#CXXFLAGS+= -fmemoize-lookups -fsave-memoized
55#
56# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested
57# for use in developing FreeBSD and testing changes. They can be used by
58# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not
59# included here due to compiler bugs, e.g., mkdir()'s mode_t argument.
60#
61BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \
62 -Wcast-qual -Wchar-subscripts -Winline \
63 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
64 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings
65#
66# WARNS_WERROR causes -Werror to be added when WARNS is in effect.
67#
68#WARNS_WERROR= yes
69#
70# To compile just the kernel with special optimizations, you should use
71# this instead of CFLAGS (which is not applicable to kernel builds anyway).
72# There is very little to gain by using higher optimization levels, and doing
73# so can cause problems.
74#
75#COPTFLAGS= -O -pipe
76#
77# Compare before install
78#INSTALL=install -C
79#
80# To enable installing suidperl with the setuid bit turned on
81#ENABLE_SUIDPERL= true
82#
83# To build ppp with normal permissions
84#PPP_NOSUID= true
85#
86# To enable installing ssh(1) with the setuid bit turned on
87#ENABLE_SUID_SSH= true
88#
89# To avoid building various parts of the base system:
90#NO_CVS= true # do not build CVS
91#NO_BIND= true # do not build BIND
92#NO_FORTRAN= true # do not build g77 and related libraries
93#NO_I4B= true # do not build isdn4bsd package
94#NO_IPFILTER= true # do not build IP Filter package
95#NO_LPR= true # do not build lpr and related programs
96#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector
97#NO_MODULES= true # do not build modules with the kernel
98#NO_OBJC= true # do not build Objective C support
99#NO_OPENSSH= true # do not build OpenSSH
100#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH)
101#NO_SENDMAIL= true # do not build sendmail and related programs
102#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs
103#NO_TCSH= true # do not build and install /bin/csh (which is tcsh)
104#NO_X= true # do not compile in XWindows support (e.g. doscmd)
105#NOCRYPT= true # do not build any crypto code
106#NOGAMES= true # do not build games (games/ subdir)
107#NOINFO= true # do not make or install info files
108#NOLIBC_R= true # do not build libc_r (re-entrant version of libc)
109#NOMAN= true # do not build manual pages
110#NOPERL= true # do not build perl. Disables OpenSSL optimizations
111#NOPROFILE= true # Avoid compiling profiled libraries
112#NOSECURE= true # do not build crypto code in secure/ subdir
113#NOSHARE= true # do not go into the share subdir
114#NOUUCP= true # do not build uucp related programs
115#
116# To build sys/modules when building the world (our old way of doing things)
117#MODULES_WITH_WORLD=true # do not build modules when building kernel
118#
119# The list of modules to build instead of all of them.
120#MODULES_OVERRIDE= linux ipfw
121#
122# The following controls building optional IDEA code in libcrypto and
123# certain ports. Patents are involved - you must not use this unless
124# you either have a license or fall within patent 'fair use'
125# provisions.
126#
127# *** It is YOUR RESPONSIBILITY to determine if you can use this! ***
128#
129# IDEA is patented in the USA and many European countries - thought to
130# be OK to use for any non-commercial use. This is optional.
131#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption)
132#
133# To avoid running MAKEDEV all on /dev during install:
134#NO_MAKEDEV= true
135#
136# If you do not want unformatted manual pages to be compressed
137# when they are installed:
138#
139#NOMANCOMPRESS= true
140#
141#
142# If you want the "compat" shared libraries installed as part of your normal
143# builds, uncomment these:
144#
145#COMPAT1X= yes
146#COMPAT20= yes
147#COMPAT21= yes
148#COMPAT22= yes
149#COMPAT3X= yes
150#COMPAT4X= yes
151#
152#
153# If you do not want additional documentation (some of which are
154# a few hundred KB's) for ports to be installed:
155#
156#NOPORTDOCS= true
157#
158#
159# Default format for system documentation, depends on your printer.
160# Set this to "ascii" for simple printers or screen
161#
162#PRINTERDEVICE= ps
163#
164#
165# How long to wait for a console keypress before booting the default kernel.
166# This value is approximately in milliseconds. Keypresses are accepted by the
167# BIOS before booting from disk, making it possible to give custom boot
168# parameters even when this is set to 0.
169#
170#BOOTWAIT=0
171#BOOTWAIT=30000
172#
173# By default, the system will always use the keyboard/video card as system
174# console. However, the boot blocks may be dynamically configured to use a
175# serial port in addition to or instead of the keyboard/video console.
176#
177# By default we use COM1 as our serial console port *if* we're going to use
178# a serial port as our console at all. Alter as necessary.
179#
180# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
181#
182#BOOT_COMCONSOLE_PORT= 0x3F8
183#
184# The default serial console speed is 9600. Set the speed to a larger value
185# for better interactive response.
186#
187#BOOT_COMCONSOLE_SPEED= 115200
188#
189# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining
190# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel
191# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet
192# still mount the server's '/' (i.e. rather than load the server's kernel).
193#
194#LOADER_TFTP_SUPPORT= YES
195#
196# By default, the ports collection attempts to use XFree86 4.X. If
197# you are running XFree86 3.3.X, uncomment this line.
198#
199#XFREE86_VERSION= 3
200#
201# By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier.
202# If you have a XFree86 from before 3.0 that has the X distribution in
203# /usr/X386, you want to uncomment this.
204#
205#X11BASE= /usr/X386
206#
207#
208# If you have Motif on your system, uncomment this.
209#
210#HAVE_MOTIF= yes
211#MOTIF_STATIC= yes
212#
213# If the default location of the Motif library (specified below) is NOT
214# appropriate for you, uncomment this and change it to the correct value.
215# If your motif is in ${X11BASE}/lib, you don't need to touch this line.
216#
217#MOTIFLIB= -L${X11BASE}/lib -lXm
218#
219#
220# If you're resident in the USA, this will help various ports to determine
221# whether or not they should attempt to comply with the various U.S.
222# export regulations on certain types of software which do not apply to
223# anyone else in the world.
224#
225#USA_RESIDENT= YES
226#
227#
228# Override "don't install a port that's already installed" behavior.
229# One might wish to do this for ports debugging or to unconditionally
230# reinstall a set of suspect/broken ports.
231#
232#FORCE_PKG_REGISTER= YES
233#
234#
235# If you're behind a firewall and need FTP or HTTP proxy services for
236# ports collection fetching to work, the following examples give the
237# necessary syntax. See the fetch(3) man page for details.
238#
239#FETCH_ENV= FTP_PROXY=ftp://10.0.0.1:21
240#FETCH_ENV= HTTP_PROXY=http://10.0.0.1:80
241#
242#
243# Port master sites.
244#
245# If you want your port fetches to go somewhere else than the default
246# (specified below) in case the distfile/patchfile was not found,
247# uncomment this and change it to a location nearest you. (Don't
248# remove the "/${DIST_SUBDIR}/" part.)
249#
250#MASTER_SITE_BACKUP?= \
251# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
252#
253# If you want your port fetches to check the above site first (before
254# the MASTER_SITES specified in the port Makefiles), uncomment the
255# line below. You can also change the right side to point to wherever
256# you want.
257#
258#MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP}
259#
260# Some ports use a special variable to point to a collection of
261# mirrors of well-known software archives. If you have a mirror close
262# to you, uncomment any of the following lines and change it to that
263# address. (Don't remove the "/%SUBDIR%/" part.)
264#
265# Note: the right hand sides of the following lines are only for your
266# information. For a full list of default sites, take a look at
267# bsd.sites.mk.
268#
269#MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/
270#MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/
271#MASTER_SITE_FREEBSD_ORG= ftp://ftp.FreeBSD.org/pub/FreeBSD/%SUBDIR%/
272#MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/%SUBDIR%/
273#MASTER_SITE_GNU= ftp://ftp.gnu.org/gnu/%SUBDIR%/
274#MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/
275#MASTER_SITE_LOCAL= ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/%SUBDIR%/
276#MASTER_SITE_MOZILLA= ftp://ftp.mozilla.org/pub/%SUBDIR%/
277#MASTER_SITE_NETBSD= ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/%SUBDIR%/
278#MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/
279#MASTER_SITE_PORTS_JP= ftp://ports.jp.FreeBSD.org/pub/FreeBSD-jp/ports-jp/LOCAL_PORTS/%SUBDIR%/
280#MASTER_SITE_RINGSERVER= ftp://ftp.dnsbalance.ring.gr.jp/pub/%SUBDIR%/
281#MASTER_SITE_RUBY= ftp://ftp.ruby-lang.org/pub/ruby/%SUBDIR%/
282#MASTER_SITE_SOURCEFORGE= ftp://ftp2.sourceforge.net/pub/sourceforge/%SUBDIR%/
283#MASTER_SITE_SOURCEWARE= ftp://ftp.freesoftware.com/pub/sourceware/%SUBDIR%/
284#MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/
285#MASTER_SITE_TCLTK= ftp://ftp.scriptics.com/pub/tcl/%SUBDIR%/
286#MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/
287#MASTER_SITE_THEMES= ftp://ftp.themes.org/pub/themes/%SUBDIR%/
288#MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/
289#MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/
290#MASTER_SITE_XEMACS= ftp://ftp.xemacs.org/pub/xemacs/%SUBDIR%/
291#MASTER_SITE_XFREE= ftp://ftp.xfree86.org/pub/XFree86/%SUBDIR%/source/
292#
293# Also it is highly recommended that you configure MASTER_SORT_REGEX
294# to choose better mirror sites for you. List awk(1)-style regular
295# expressions separated by space so MASTER_SITES will be sorted in
296# that order. The following example is for Japanese users; change
297# "jp" part to your ccTLD ("de", "ru", "uk", etc.) or the domain names
298# of your nearest/upstream networks to meet your needs.
299#
300#MASTER_SORT_REGEX?= ://[^/]*\.jp[/.]
301#
302# Ports can place their working directories somewhere other than under
303# /usr/ports.
304#WRKDIRPREFIX= /var/tmp
305#
306# Kerberos IV
307# If you want KerberosIV (KTH eBones), define this:
308#
309#MAKE_KERBEROS4= yes
310#
311#
312# Kerberos 5
313# If you want Kerberos 5 (KTH Heimdal), define this:
314#
315#MAKE_KERBEROS5= yes
316#
317# Kerberos 5 su (k5su)
318# If you want to use the k5su utility, define this to have it installed
319# set-user-ID.
320#ENABLE_SUID_K5SU= yes
321#
322#
323# Kerberos5
324# If you want to install MIT Kerberos5 port somewhere other than /usr/local,
325# define this (this is also used to tell ssh1 that kerberos is needed):
326#
327#KRB5_HOME= /usr/local
328#
329#
330# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution
331# file(s) you use on your site (see /usr/share/examples/cvsup/README for more
332# information on CVSup and these files). To use, do "make update" in /usr/src.
333#
334#SUP_UPDATE= yes
335#
336#SUP= /usr/local/bin/cvsup
337#SUPFLAGS= -g -L 2
338#SUPHOST= cvsup.uk.FreeBSD.org
339#SUPFILE= /usr/share/examples/cvsup/stable-supfile
340#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile
341#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile
342#
343# top(1) uses a hash table for the user names. The size of this hash
344# can be tuned to match the number of local users. The table size should
345# be a prime number approximately twice as large as the number of lines in
346# /etc/passwd. The default number is 20011.
347#
348#TOP_TABLE_SIZE= 101
349#
350# Documentation
351#
352# The list of languages and encodings to build and install
353#
354#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R
355#
356#
357# sendmail
358#
359# The following sets the default m4 configuration file to use at
360# install time. Use with caution as a make install will overwrite
361# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now
362# deprecated. The value should be a fully qualified path name.
363# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
364# create /etc/mail/sendmail.cf before installworld installs an
365# updated sendmail binary.
366#
367#SENDMAIL_MC=/etc/mail/myconfig.mc
368#
369# The following sets the default m4 configuration file for mail
370# submission to use at install time. Use with caution as a make
371# install will overwrite any existing /etc/mail/submit.cf. The
372# value should be a fully qualified path name.
373# Avoid using a value of /etc/mail/submit.mc as a buildworld will
374# create /etc/mail/submit.cf before installworld installs an
375# updated sendmail binary.
376#
377#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
378#
379# If you need to build additional .cf files during a make buildworld,
380# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC.
381# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
382# create /etc/mail/sendmail.cf before installworld installs an
383# updated sendmail binary.
384#
385#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc
386#
387# Setting the following variable modifies the flags passed to m4 when
388# building a .cf file from a .mc file. It can be used to enable
389# features disabled by default.
390#
391#SENDMAIL_M4_FLAGS=
392#
393# Setting the following variables modifies the build environment for
394# sendmail and its related utilities. For example, SASL support can be
395# added with settings such as:
396#
397# with SASLv1:
398# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL
399# SENDMAIL_LDFLAGS=-L/usr/local/lib
400# SENDMAIL_LDADD=-lsasl
401#
402# with SASLv2:
403# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
404# SENDMAIL_LDFLAGS=-L/usr/local/lib
405# SENDMAIL_LDADD=-lsasl2
406#
407# Note: If you are using Cyrus SASL with other applications which require
408# access to the sasldb file, you should add the following to your
409# sendmail.mc file:
410#
411# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')
412#
413#SENDMAIL_CFLAGS=
414#SENDMAIL_LDFLAGS=
415#SENDMAIL_LDADD=
416#SENDMAIL_DPADD=
417#
418# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a
419# set-user-ID root binary instead of a set-group-ID smmsp binary and will
420# prevent the installation of /etc/mail/submit.cf.
421# This is a deprecated mode of operation. See etc/mail/README for more
422# information.
423#
424#SENDMAIL_SET_USER_ID=
425#
426# The permissions to use on alias and map databases generated using
427# /etc/mail/Makefile. Defaults to 0640.
428#
429#SENDMAIL_MAP_PERMS=