Remove some more old files via 'make upgrade'.
[dragonfly.git] / Makefile.inc1
CommitLineData
984263bc
MD
1#
2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
cecff5c1
MD
3#
4# Build-time options are documented in make.conf(5).
984263bc
MD
5#
6# The intended user-driven targets are:
1397f94a 7#
984263bc 8# buildworld - rebuild *everything*, including glue to help do upgrades
1397f94a
MD
9# quickworld - skip the glue and do a depend+build on the meat
10# realquickworld - skip the glue and depend stages and just build the meat
11# crossworld - only build the glue (particularly the cross-build environment)
984263bc 12# installworld- install everything built by "buildworld"
2decc9b9
JM
13# backupworld - copies /bin /sbin /usr/bin /usr/sbin /usr/lib /usr/libexec
14# to manual backup dir
917662e5 15# rescue - create rescue image
2decc9b9
JM
16# restoreworld- installs binaries from manual backup dir to world
17# restoreworld-auto - installs binaries from auto-backup dir to world
984263bc
MD
18# most - build user commands, no libraries or include files
19# installmost - install user commands, no libraries or include files
2decc9b9
JM
20# backup-clean - delete backup from manual backup dir
21# backup-auto-clean - delete backup from auto-backup dir
984263bc
MD
22#
23# Standard targets (not defined here) are documented in the makefiles in
24# /usr/share/mk. These include:
25# obj depend all install clean cleandepend cleanobj
26
27# Put initial settings here.
28SUBDIR=
29
16dbe6a9
FT
30# /libexec/ld-elf.so.2 needs to be installed first
31# Otherwise, install(1) beeing a dynamically linked binary will fail
32# during the first upgrade from a static to a dynamic world
33.if exists(${.CURDIR}/libexec)
34SUBDIR+= libexec
35.endif
36
984263bc
MD
37# We must do share/info early so that installation of info `dir'
38# entries works correctly. Do it first since it is less likely to
39# grow dependencies on include and lib than vice versa.
40.if exists(${.CURDIR}/share/info)
41SUBDIR+= share/info
42.endif
43
44# We must do include and lib early so that the perl *.ph generation
45# works correctly as it uses the header files installed by this.
46.if exists(${.CURDIR}/include)
47SUBDIR+= include
48.endif
49.if exists(${.CURDIR}/lib)
50SUBDIR+= lib
51.endif
17d0fefe
MD
52# This exists simply to ensure that the obj dir hierarchy is
53# intact for nrelease, allowing the nrelease Makefile's to
54# reference ${.OBJDIR}.
55#
56.if exists(${.CURDIR}/nrelease)
57SUBDIR+= nrelease
58.endif
984263bc
MD
59
60.if exists(${.CURDIR}/bin)
61SUBDIR+= bin
62.endif
cecff5c1 63.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
984263bc
MD
64SUBDIR+= games
65.endif
66.if exists(${.CURDIR}/gnu)
67SUBDIR+= gnu
68.endif
984263bc
MD
69.if exists(${.CURDIR}/sbin)
70SUBDIR+= sbin
71.endif
cecff5c1 72.if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
984263bc
MD
73SUBDIR+= secure
74.endif
cecff5c1 75.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
984263bc
MD
76SUBDIR+= share
77.endif
78.if exists(${.CURDIR}/sys)
79SUBDIR+= sys
80.endif
81.if exists(${.CURDIR}/usr.bin)
82SUBDIR+= usr.bin
83.endif
84.if exists(${.CURDIR}/usr.sbin)
85SUBDIR+= usr.sbin
86.endif
87
984263bc
MD
88.if exists(${.CURDIR}/etc)
89SUBDIR+= etc
90.endif
91
92# These are last, since it is nice to at least get the base system
93# rebuilt before you do them.
94.if defined(LOCAL_DIRS)
95.for _DIR in ${LOCAL_DIRS}
96.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
97SUBDIR+= ${_DIR}
98.endif
99.endfor
100.endif
101
102.if defined(SUBDIR_OVERRIDE)
103SUBDIR= ${SUBDIR_OVERRIDE}
104.endif
105
106.if defined(NOCLEANDIR)
107CLEANDIR= clean cleandepend
108.else
109CLEANDIR= cleandir
110.endif
111
9974d917
SS
112.if defined(NO_CLEAN)
113NOCLEAN= # defined
114.endif
d0a8f509 115
1397f94a
MD
116# Object directory base in primary make. Note that when we rerun make
117# from inside this file we change MAKEOBJDIRPREFIX to the appropriate
118# subdirectory because the rest of the build system needs it that way.
119# The original object directory base is saved in OBJTREE.
120#
984263bc 121MAKEOBJDIRPREFIX?= /usr/obj
1397f94a
MD
122OBJTREE?= ${MAKEOBJDIRPREFIX}
123
124# Used for stage installs and pathing
125#
75d86d8d 126DESTDIRBASE:= ${OBJTREE}${.CURDIR}
1397f94a 127
c89fd520
SS
128# Remove DESTDIR from MAKEFLAGS. It is present in the environment
129# anyhow, and we need to be able to override it for stage installs
130.MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*}
131
0756733f 132# This section sets the tools used to build the world/kernel
6100d1de 133WORLD_CCVER?= gcc47
0756733f 134WORLD_LDVER?= ld.bfd
408d50d5 135WORLD_BINUTILSVER?= binutils225
ded5c503 136
7bee86c0
JM
137# Set the backup parameters if they are not already defined
138#
61443441 139WORLD_BACKUP?= /var/backups/world_backup
2decc9b9 140AUTO_BACKUP?= ${OBJTREE}/world_backup/${DESTDIR}
7bee86c0 141
984263bc
MD
142TARGET_ARCH?= ${MACHINE_ARCH}
143.if ${TARGET_ARCH} == ${MACHINE_ARCH}
144TARGET?= ${MACHINE}
145.else
146TARGET?= ${TARGET_ARCH}
147.endif
148.if make(buildworld)
149BUILD_ARCH!= sysctl -n hw.machine_arch
b2b3ffcd
SS
150
151# temporary until everybody has converted to x86_64
152.if ${BUILD_ARCH} == "amd64"
153BUILD_ARCH= x86_64
154.endif
155
984263bc
MD
156.if ${MACHINE_ARCH} != ${BUILD_ARCH}
157.error To cross-build, set TARGET_ARCH.
158.endif
159.endif
1397f94a 160
0955fd91
MD
161# Backwards compatibility with older make's or older sys.mk's. make
162# is expected to define MACHINE_PLATFORM.
163#
164.if !defined(MACHINE_PLATFORM)
165MACHINE_PLATFORM= pc32
166.endif
4d005c1d
SS
167
168# XXX this is ugly and we need to come up with a nicer solution
169.if !defined(TARGET_PLATFORM)
170.if ${TARGET_ARCH} == "i386"
171TARGET_PLATFORM= pc32
b2b3ffcd 172.elif ${TARGET_ARCH} == "x86_64"
4d005c1d
SS
173TARGET_PLATFORM= pc64
174.else
175.error Unknown target architecture.
176.endif
177.endif
0955fd91 178
5f87b7d3
SZ
179THREAD_LIB?= thread_xu
180.if ${THREAD_LIB} == "c_r"
181.if defined(NO_LIBC_R)
182.error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
183.endif
184.endif
185
1397f94a
MD
186# BTOOLS (Natively built) All non-cross-development tools that the
187# main build needs. This includes things like 'mkdir' and 'rm'.
188# We will not use the native system's exec path once we start
189# on WORLD. (bootstrap-tools and build-tools or BTOOLS)
190#
191# CTOOLS (Natively built) Cross development tools which are specific
192# to the target architecture.
193#
194# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and
195# CTOOLS.
196#
0955fd91
MD
197# MACHINE_PLATFORM Platform Architecture we are building on
198# MACHINE Machine Architecture (usually the same as MACHINE_ARCH)
e2ea6619
MD
199# MACHINE_ARCH Cpu Architecture we are building on
200#
0955fd91
MD
201# TARGET_PLATFORM Platform Architecture we are building for
202# TARGET Machine Architecture we are building for
e2ea6619 203# TARGET_ARCH Cpu Architecture we are building for
1397f94a
MD
204#
205BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH}
206CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
207WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH}
208
79aa78bc
MD
209# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
210# cross-tools stages to augment the existing command path to access newer
211# versions of certain utilities such as 'patch' that the cross-tools stage
212# might expect.
213#
214BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
215
1397f94a
MD
216# The strict temporary command path contains all binaries required
217# by the buildworld system after the cross-tools stage.
218#
ee48961f 219STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games:/usr/local/bin:/usr/pkg/bin
984263bc
MD
220
221TMPDIR?= /tmp
222TMPPID!= echo $$$$
984263bc
MD
223
224#
225# Building a world goes through the following stages
226#
227# 1. bootstrap-tool stage [BMAKE]
228# This stage is responsible for creating programs that
229# are needed for backward compatibility reasons. They
230# are not built as cross-tools.
231# 2. build-tool stage [TMAKE]
232# This stage is responsible for creating the object
233# tree and building any tools that are needed during
234# the build process.
235# 3. cross-tool stage [XMAKE]
236# This stage is responsible for creating any tools that
237# are needed for cross-builds. A cross-compiler is one
238# of them.
239# 4. world stage [WMAKE]
240# This stage actually builds the world.
241# 5. install stage (optional) [IMAKE]
242# This stage installs a previously built world.
243#
e92bae40
MD
244# In all cases we must carefully adjust the environment so the proper
245# tools and header files are used.
246#
247# NOTE: The M4 environment variable is used by the [f]lex binary to
248# override the location of the 'm4' binary. The override is
249# needed for certain buildworld version transitions, specifically
250# past a certain point in 3.3 because the older /usr/bin/m4 will
251# generate output that will blow up the newer [f]lex/yacc/bison
252# utilities.
253#
984263bc 254
984263bc 255# bootstrap-tool stage
1397f94a
MD
256#
257BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
258 OBJTREE=${OBJTREE} \
44831353 259 DESTDIR=${BTOOLSDEST} \
79aa78bc 260 PATH=${BTOOLSPATH}:${PATH} \
e92bae40 261 M4=${BTOOLSDEST}/usr/bin/m4 \
984263bc 262 INSTALL="sh ${.CURDIR}/tools/install.sh"
1397f94a 263
f8a75064 264BMAKE= ${BMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
e486d225 265 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
7a1f111f 266 -DNO_WERROR -DNO_NLS -DSYSBUILD
984263bc
MD
267
268# build-tool stage
1397f94a
MD
269#
270TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
271 OBJTREE=${OBJTREE} \
984263bc 272 DESTDIR= \
79aa78bc 273 PATH=${BTOOLSPATH}:${PATH} \
e92bae40 274 M4=${BTOOLSDEST}/usr/bin/m4 \
984263bc 275 INSTALL="sh ${.CURDIR}/tools/install.sh"
1397f94a 276
7a1f111f
JM
277TMAKE= ${TMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
278 -DNOSHARED -DSYSBUILD
984263bc
MD
279
280# cross-tool stage
1397f94a
MD
281#
282# note: TOOLS_PREFIX points to the obj root holding the cross
44831353
MD
283# compiler binaries, while USRDATA_PREFIX points to the obj root
284# holding the target environment (and also determines where cross-built
285# libraries, crt*.o, and include files are installed).
1397f94a
MD
286#
287XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \
288 OBJTREE=${OBJTREE} \
289 DESTDIR=${CTOOLSDEST} \
aa8dd846 290 _SHLIBDIRPREFIX=${CTOOLSDEST} \
1397f94a
MD
291 INSTALL="sh ${.CURDIR}/tools/install.sh" \
292 TOOLS_PREFIX=${CTOOLSDEST} \
79aa78bc 293 USRDATA_PREFIX=${WORLDDEST} \
738725bf 294 SELECT_LINKER=${WORLD_LDVER} \
e92bae40 295 M4=${BTOOLSDEST}/usr/bin/m4 \
79aa78bc 296 PATH=${BTOOLSPATH}:${PATH}
1397f94a 297
6254283a 298XMAKE= ${XMAKEENV} make -f Makefile.inc1 -DNO_GDB \
7a1f111f 299 -DBOOTSTRAPPING -DNOSHARED -DSYSBUILD
1397f94a
MD
300
301# world stage, note the strict path and note that TOOLS_PREFIX is left
302# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
303# which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
304# for both binary and library paths, even though it is being compiled to
305# WORLDDEST. None of the programs in the world stage are ever actually
306# executed during the buildworld/installworld.
307#
308CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \
309 OBJTREE=${OBJTREE} \
310 MACHINE_ARCH=${TARGET_ARCH} \
311 MACHINE=${TARGET} \
0955fd91 312 MACHINE_PLATFORM=${TARGET_PLATFORM} \
ded5c503 313 OBJFORMAT_PATH=${CTOOLSDEST} \
ce6fa878 314 HOST_CCVER=${HOST_CCVER} \
123dec51 315 CCVER=${WORLD_CCVER} \
0756733f 316 LDVER=${WORLD_LDVER} \
123dec51 317 BINUTILSVER=${WORLD_BINUTILSVER}
984263bc 318
984263bc 319WMAKEENV= ${CROSSENV} \
1397f94a 320 DESTDIR=${WORLDDEST} \
aa8dd846 321 _SHLIBDIRPREFIX=${WORLDDEST} \
984263bc 322 INSTALL="sh ${.CURDIR}/tools/install.sh" \
e92bae40 323 M4=${BTOOLSDEST}/usr/bin/m4 \
1397f94a
MD
324 PATH=${STRICTTMPPATH}
325
7a1f111f 326WMAKE= ${WMAKEENV} make -f Makefile.inc1 -DSYSBUILD
984263bc
MD
327
328# install stage
b07b69cc 329#
984263bc 330IMAKEENV= ${CROSSENV} \
1397f94a 331 PATH=${STRICTTMPPATH}
7a1f111f 332IMAKE= ${IMAKEENV} make -f Makefile.inc1 -DSYSBUILD
984263bc
MD
333
334# kernel stage
b07b69cc
MD
335#
336KMAKEENV= ${WMAKEENV}
984263bc 337
984263bc
MD
338# buildworld
339#
340# Attempt to rebuild the entire system, with reasonable chance of
341# success, regardless of how old your existing system is.
342#
2cde9453
SS
343_worldtmp: _cleantmp _mtreetmp
344.ORDER: _cleantmp _mtreetmp
345
346_cleantmp:
984263bc
MD
347 @echo
348 @echo "--------------------------------------------------------------"
349 @echo ">>> Rebuilding the temporary build tree"
350 @echo "--------------------------------------------------------------"
351.if !defined(NOCLEAN)
1397f94a 352 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
984263bc
MD
353.else
354 # XXX - These two can depend on any header file.
355 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
356 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
357.endif
2cde9453
SS
358
359_mtreetmp:
1397f94a
MD
360 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
361.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
362 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
363 -p ${_dir}/ > /dev/null
364 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
365 -p ${_dir}/usr > /dev/null
984263bc 366.endfor
1397f94a
MD
367 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
368 -p ${WORLDDEST}/usr/include > /dev/null
062db326 369 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
1397f94a 370
984263bc
MD
371_bootstrap-tools:
372 @echo
373 @echo "--------------------------------------------------------------"
374 @echo ">>> stage 1: bootstrap tools"
375 @echo "--------------------------------------------------------------"
376 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
377_cleanobj:
984263bc
MD
378 @echo
379 @echo "--------------------------------------------------------------"
1397f94a 380 @echo ">>> stage 2a: cleaning up the object tree"
984263bc
MD
381 @echo "--------------------------------------------------------------"
382 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
984263bc
MD
383_obj:
384 @echo
385 @echo "--------------------------------------------------------------"
1397f94a 386 @echo ">>> stage 2b: rebuilding the object tree"
984263bc
MD
387 @echo "--------------------------------------------------------------"
388 cd ${.CURDIR}; ${WMAKE} par-obj
389_build-tools:
390 @echo
391 @echo "--------------------------------------------------------------"
1397f94a 392 @echo ">>> stage 2c: build tools"
984263bc
MD
393 @echo "--------------------------------------------------------------"
394 cd ${.CURDIR}; ${TMAKE} build-tools
395_cross-tools:
396 @echo
397 @echo "--------------------------------------------------------------"
398 @echo ">>> stage 3: cross tools"
399 @echo "--------------------------------------------------------------"
400 cd ${.CURDIR}; ${XMAKE} cross-tools
401_includes:
402 @echo
403 @echo "--------------------------------------------------------------"
1397f94a 404 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
984263bc
MD
405 @echo "--------------------------------------------------------------"
406 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
407_libraries:
408 @echo
409 @echo "--------------------------------------------------------------"
1397f94a 410 @echo ">>> stage 4b: building libraries"
984263bc
MD
411 @echo "--------------------------------------------------------------"
412 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
413_depend:
414 @echo
415 @echo "--------------------------------------------------------------"
1397f94a 416 @echo ">>> stage 4c: make dependencies"
984263bc
MD
417 @echo "--------------------------------------------------------------"
418 cd ${.CURDIR}; ${WMAKE} par-depend
419everything:
420 @echo
421 @echo "--------------------------------------------------------------"
1397f94a 422 @echo ">>> stage 4d: building everything.."
984263bc
MD
423 @echo "--------------------------------------------------------------"
424 cd ${.CURDIR}; ${WMAKE} all
24c1eacf
JM
425_bwinit:
426 @echo "--------------------------------------------------------------"
427 @echo ">>> starting buildworld target"
428 @echo "--------------------------------------------------------------"
429_bwdone:
430 @echo "--------------------------------------------------------------"
431 @echo ">>> buildworld target complete"
432 @echo "--------------------------------------------------------------"
433_qwinit:
434 @echo "--------------------------------------------------------------"
435 @echo ">>> starting quickworld target"
436 @echo "--------------------------------------------------------------"
437_qwdone:
438 @echo "--------------------------------------------------------------"
439 @echo ">>> quickworld target complete"
440 @echo "--------------------------------------------------------------"
441_iwinit:
442 @echo "--------------------------------------------------------------"
443 @echo ">>> starting installworld target"
444 @echo "--------------------------------------------------------------"
984263bc 445
1397f94a
MD
446# note: buildworld no longer depends on _cleanobj because we rm -rf the
447# entire object tree and built the bootstrap tools in a different location.
448#
449# buildworld - build everything from scratch
450# quickworld - skip the bootstrap, build, and cross-build steps
451# realquickworld - skip the bootstrap, build, crossbuild, and depend step.
452#
453# note: we include _obj in realquickworld to prevent accidental creation
454# of files in /usr/src.
984263bc 455
c08b39fe 456WMAKE_TGTS=
984263bc
MD
457.if !defined(SUBDIR_OVERRIDE)
458WMAKE_TGTS+= _worldtmp _bootstrap-tools
459.endif
1397f94a 460WMAKE_TGTS+= _obj _build-tools
984263bc
MD
461.if !defined(SUBDIR_OVERRIDE)
462WMAKE_TGTS+= _cross-tools
463.endif
464WMAKE_TGTS+= _includes _libraries _depend everything
465
24c1eacf 466buildworld: _bwinit ${WMAKE_TGTS} _bwdone
1397f94a 467
24c1eacf 468quickworld: _qwinit _mtreetmp _obj _includes _libraries _depend everything _qwdone
1397f94a 469
24c1eacf 470realquickworld: _qwinit _mtreetmp _obj _includes _libraries everything _qwdone
1397f94a
MD
471
472crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
473
24c1eacf 474.ORDER: _bwinit ${WMAKE_TGTS} _bwdone
9ce30817 475.ORDER: _obj _includes
24c1eacf 476.ORDER: _qwinit _mtreetmp _obj
61443441 477.ORDER: installcheck backupworld-auto
24c1eacf 478.ORDER: everything _qwdone
984263bc
MD
479
480#
481# installcheck
482#
c08b39fe 483# Checks to be sure system is ready for installworld
984263bc 484#
24c1eacf 485installcheck: _iwinit
3da8e88f
JM
486 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
487 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
488 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
108fa417 489.if !defined(OVERRIDE_CHECKS)
9b815a46 490.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
3da8e88f 491 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; /usr/bin/false ; esac
108fa417
MD
492 @case `uname -r` in 1.*|2.*|3.0*|3.1*|3.2*|3.3*|3.4*|3.5*|3.6*) echo "Base is too old for a normal installworld, you need to use installworld-force" ; /usr/bin/false ; esac
493.endif
9b815a46 494.endif
1516019b 495
984263bc
MD
496#
497# installworld
498#
1516019b 499# Backs up the current world if ${AUTO_BACKUP} is writable.
984263bc 500# Installs everything compiled by a 'buildworld'.
e66f5ba7
MD
501#
502# Includes sleep/sync safety before running mkinitrd.
1516019b
MD
503
504installworld: installcheck
505 -@mkdir -p ${AUTO_BACKUP} > /dev/null 2>&1
506 @cd ${.CURDIR}; \
507 (touch ${AUTO_BACKUP}/.updating > /dev/null 2>&1 && \
508 ${IMAKE} backupworld-auto) || \
509 echo "Cannot write to ${AUTO_BACKUP} - world not backed up"
510
984263bc 511 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
ec6483ce 512 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
917662e5 513 sync
24c1eacf
JM
514 @echo "--------------------------------------------------------------"
515 @echo ">>> installworld target complete"
516 @echo "--------------------------------------------------------------"
517 @echo "If things work as expected after a full reboot, consider updating the rescue"
518 @echo "image with 'make rescue'. Do not do it until after rebooting."
917662e5 519
108fa417
MD
520installworld-force:
521 @echo "Doing a forced installworld. This will install to a temporary directory,"
522 @echo "then copy the main binaries and libraries with a static cpdup to ${DESTDIR}/"
523 @echo "and finally willl issue a normal installworld. Starting in 5 seconds.".
524 @echo "^C to abort."
525 sleep 1
526 rm -rf /usr/obj/temp > /dev/null 2>& 1 || chflags -R noschg /usr/obj/temp
527 rm -rf /usr/obj/temp
528 mkdir -p /usr/obj/temp/cpdup/bin
529 (cd ${.CURDIR}/bin/cpdup; make clean; make obj; make clean; make CFLAGS=-static all install DESTDIR=/usr/obj/temp/cpdup NOMAN=TRUE)
530 @echo "XXXXXXXXX Installing to temporary XXXXXXXXX"
531 @sleep 1
532 (cd ${.CURDIR}; ${MAKE} installworld DESTDIR=/usr/obj/temp > /dev/null 2>&1)
533 @echo "XXXXXXXXX Blasting binaries and libraries XXXXXXXXX"
534 @sleep 1
535 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/bin /bin
536 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/sbin /sbin
537 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/lib /lib
538 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/bin /usr/bin
539 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/sbin /usr/sbin
540 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/lib /usr/lib
541 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/libexec /libexec
542 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/libexec /usr/libexec
543 @echo "XXXXXXXXX Doing final installworld XXXXXXXX"
544 sleep 5
545 (cd ${.CURDIR}; ${MAKE} installworld OVERRIDE_CHECKS=TRUE)
546 (cd ${.CURDIR}; ${MAKE} upgrade OVERRIDE_CHECKS=TRUE)
547
917662e5
MD
548# Create a rescue image. We no longer do this automatically for several
549# reasons, primarily that users have had serious issue with mismatched 'vn'
550# vs the kldload image that can crash the system. But also, the rescue image
551# is intended to be a rescue image, it is a bad idea to update it at the
552# same time the world is installed.
553#
554rescue:
a93ddcbb 555 mkinitrd -b ${DESTDIR}/boot
984263bc
MD
556
557#
558# reinstall
559#
560# If you have a build server, you can NFS mount the source and obj directories
561# and do a 'make reinstall' on the *client* to install new binaries from the
562# most recent server build.
563#
564reinstall:
565 @echo "--------------------------------------------------------------"
566 @echo ">>> Making hierarchy"
567 @echo "--------------------------------------------------------------"
f8a75064 568 cd ${.CURDIR}; make -f Makefile.inc1 hierarchy
984263bc
MD
569 @echo
570 @echo "--------------------------------------------------------------"
571 @echo ">>> Installing everything.."
572 @echo "--------------------------------------------------------------"
f8a75064 573 cd ${.CURDIR}; make -f Makefile.inc1 install
984263bc 574
984263bc 575#
fc7aca3e 576# buildkernel, nativekernel, quickkernel, and installkernel
984263bc
MD
577#
578# Which kernels to build and/or install is specified by setting
579# KERNCONF. If not defined a GENERIC kernel is built/installed.
580# Only the existing (depending TARGET) config files are used
581# for building kernels and only the first of these is designated
582# as the one being installed.
583#
c2c83759
MD
584# You can specify INSTALLSTRIPPED=1 if you wish the installed
585# kernel and modules to be stripped of its debug info (required
586# symbols are left intact). You can specify INSTALLSTRIPPEDMODULES
587# if you only want to strip the modules of their debug info. These
588# only apply if you have DEBUG=-g in your kernel config or make line.
589#
984263bc
MD
590# Note that we have to use TARGET instead of TARGET_ARCH when
591# we're in kernel-land. Since only TARGET_ARCH is (expected) to
592# be set to cross-build, we have to make sure TARGET is set
593# properly.
594
595.if !defined(KERNCONF) && defined(KERNEL)
596KERNCONF= ${KERNEL}
597KERNWARN= yes
598.else
702a95cc
SS
599# XXX makeshift fix to build the right kernel for the (target) architecture
600# We should configure this in the platform files somehow
601.if ${TARGET_ARCH} == "i386"
984263bc 602KERNCONF?= GENERIC
702a95cc 603.else
b2b3ffcd 604KERNCONF?= X86_64_GENERIC
702a95cc 605.endif
984263bc
MD
606.endif
607INSTKERNNAME?= kernel
608
609KRNLSRCDIR= ${.CURDIR}/sys
4e54470f 610KRNLCONFDIR= ${KRNLSRCDIR}/config
984263bc
MD
611KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
612KERNCONFDIR?= ${KRNLCONFDIR}
613
614BUILDKERNELS=
615INSTALLKERNEL=
616.for _kernel in ${KERNCONF}
617.if exists(${KERNCONFDIR}/${_kernel})
618BUILDKERNELS+= ${_kernel}
619.if empty(INSTALLKERNEL)
620INSTALLKERNEL= ${_kernel}
621.endif
622.endif
623.endfor
624
9a359590
MD
625# kernel version numbers survive rm -rf
626#
627.for _kernel in ${BUILDKERNELS}
628.if exists(${KRNLOBJDIR}/${_kernel}/version)
629KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
630.endif
631.endfor
632
984263bc
MD
633#
634# buildkernel
635#
636# Builds all kernels defined by BUILDKERNELS.
637#
fc7aca3e 638bk_tools:
e05c8c84
MD
639 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
640 echo "You must buildworld before buildkernel. If you wish"; \
641 echo "to build a kernel using native tools, config it manually"; \
642 echo "or use the nativekernel target if you are in a rush"; \
3da8e88f 643 /usr/bin/false; \
c2c83759
MD
644 fi
645
646maybe_bk_tools:
647.for _kernel in ${BUILDKERNELS}
648 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
649 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
650 echo "The kernel was build using buildworld tools which no" ; \
651 echo "longer appear to exist, quickkernel failed!" ; \
3da8e88f 652 /usr/bin/false; \
c2c83759
MD
653 fi; \
654 fi
655.endfor
e05c8c84 656
fc7aca3e 657bk_build_list:
984263bc
MD
658.if empty(BUILDKERNELS)
659 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
603cdb58 660 @echo ">>> Did you move your kernel configs from i386/conf to config/?"
984263bc
MD
661 @false
662.endif
fc7aca3e
MD
663
664bk_kernwarn:
984263bc
MD
665.if defined(KERNWARN)
666 @echo "--------------------------------------------------------------"
667 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
668 @echo "--------------------------------------------------------------"
669 @sleep 3
670.endif
671 @echo
fc7aca3e
MD
672
673# The buildkernel target rebuilds the specified kernels from scratch
674# using the crossbuild tools generated by the last buildworld. It is
675# the safest (but also the most time consuming) way to build a new kernel.
676#
677buildkernel: bk_tools bk_build_list bk_kernwarn
984263bc
MD
678.for _kernel in ${BUILDKERNELS}
679 @echo "--------------------------------------------------------------"
680 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
681 @echo "--------------------------------------------------------------"
682 @echo "===> ${_kernel}"
fc7aca3e
MD
683.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
684 rm -rf ${KRNLOBJDIR}/${_kernel}
685.else
e05c8c84 686 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
fc7aca3e 687 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
e05c8c84 688 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
fc7aca3e 689.endif
984263bc
MD
690 mkdir -p ${KRNLOBJDIR}
691.if !defined(NO_KERNELCONFIG)
692 cd ${KRNLCONFDIR}; \
1397f94a 693 PATH=${STRICTTMPPATH} \
f8a75064 694 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
984263bc 695 ${KERNCONFDIR}/${_kernel}
9a359590
MD
696.endif
697.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
698 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
984263bc 699.endif
e05c8c84 700 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
984263bc
MD
701.if !defined(NO_KERNELDEPEND)
702 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 703 ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
984263bc
MD
704.endif
705 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 706 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
984263bc
MD
707 @echo "--------------------------------------------------------------"
708 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
709 @echo "--------------------------------------------------------------"
710.endfor
711
fc7aca3e 712# The nativekernel target rebuilds the specified kernels from scratch
114580ac 713# using the system's standard compiler rather than using the crossbuild
fc7aca3e
MD
714# tools generated by the last buildworld. This is fairly safe if your
715# system is reasonable up-to-date.
e05c8c84 716#
fc7aca3e 717nativekernel: bk_build_list bk_kernwarn
e05c8c84
MD
718.for _kernel in ${BUILDKERNELS}
719 @echo "--------------------------------------------------------------"
720 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
721 @echo "--------------------------------------------------------------"
722 @echo "===> ${_kernel}"
fc7aca3e
MD
723.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
724 rm -rf ${KRNLOBJDIR}/${_kernel}
725.else
e05c8c84 726 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
fc7aca3e 727 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
e05c8c84 728 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
fc7aca3e 729.endif
e05c8c84
MD
730 mkdir -p ${KRNLOBJDIR}
731.if !defined(NO_KERNELCONFIG)
732 cd ${KRNLCONFDIR}; \
733 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
734 ${KERNCONFDIR}/${_kernel}
9a359590
MD
735.endif
736.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
737 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
e05c8c84
MD
738.endif
739 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
e05c8c84
MD
740 cd ${KRNLOBJDIR}/${_kernel}; \
741 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
f8a75064 742 make -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
e05c8c84
MD
743.if !defined(NO_KERNELDEPEND)
744 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 745 make KERNEL=${INSTKERNNAME} depend
e05c8c84
MD
746.endif
747 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 748 make KERNEL=${INSTKERNNAME} all
e05c8c84
MD
749 @echo "--------------------------------------------------------------"
750 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
751 @echo "--------------------------------------------------------------"
752.endfor
753
fc7aca3e
MD
754# The quickkernel target rebuilds the specified kernels as quickly
755# as possible. It will use the native tools or the buildworld cross tools
756# based on whether the kernel was originally generated via buildkernel or
757# nativekernel. Config is rerun but the object hierarchy is not rebuilt,
758# nor is the make depend step run.
984263bc 759#
c2c83759 760quickkernel: maybe_bk_tools bk_build_list bk_kernwarn
fc7aca3e
MD
761.for _kernel in ${BUILDKERNELS}
762 @echo "--------------------------------------------------------------"
763 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
764 @echo "--------------------------------------------------------------"
765 @echo "===> ${_kernel}"
766.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
767.if !defined(NO_KERNELCONFIG)
768 cd ${KRNLCONFDIR}; \
769 PATH=${STRICTTMPPATH} \
f8a75064 770 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
fc7aca3e
MD
771 ${KERNCONFDIR}/${_kernel}
772.endif
773 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 774 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
fc7aca3e
MD
775.else
776.if !defined(NO_KERNELCONFIG)
777 cd ${KRNLCONFDIR}; \
778 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
779 ${KERNCONFDIR}/${_kernel}
780.endif
781 cd ${KRNLOBJDIR}/${_kernel}; \
f8a75064 782 make KERNEL=${INSTKERNNAME} all
fc7aca3e
MD
783.endif
784 @echo "--------------------------------------------------------------"
785 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
786 @echo "--------------------------------------------------------------"
787.endfor
788
789
984263bc
MD
790# installkernel
791#
792# Install the kernel defined by INSTALLKERNEL
793#
794installkernel reinstallkernel:
982b0507
MD
795 @echo "--------------------------------------------------------------"
796 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
797 @echo "--------------------------------------------------------------"
798.if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
984263bc 799 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
f8a75064 800 ${IMAKEENV} make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
c2c83759
MD
801.else
802 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
f8a75064 803 make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
c2c83759 804.endif
984263bc 805
984263bc
MD
806#
807# most
808#
809# Build most of the user binaries on the existing system libs and includes.
810#
811most:
812 @echo "--------------------------------------------------------------"
813 @echo ">>> Building programs only"
814 @echo "--------------------------------------------------------------"
815.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
f8a75064 816 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ all
984263bc
MD
817.endfor
818
819#
820# installmost
821#
822# Install the binaries built by the 'most' target. This does not include
823# libraries or include files.
824#
825installmost:
826 @echo "--------------------------------------------------------------"
827 @echo ">>> Installing programs only"
828 @echo "--------------------------------------------------------------"
829.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
f8a75064 830 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ install
984263bc
MD
831.endfor
832
833#
834# ------------------------------------------------------------------------
835#
836# From here onwards are utility targets used by the 'make world' and
837# related targets. If your 'world' breaks, you may like to try to fix
838# the problem and manually run the following targets to attempt to
839# complete the build. Beware, this is *not* guaranteed to work, you
840# need to have a pretty good grip on the current state of the system
841# to attempt to manually finish it. If in doubt, 'make world' again.
842#
843
79aa78bc
MD
844# bootstrap-tools: Build all tools required to build all tools. Note that
845# order is important in a number of cases and also note that the bootstrap
846# and build tools stages have access to earlier binaries they themselves
847# had generated.
984263bc 848#
79aa78bc
MD
849# patch: older patch's do not have -i. This program must be built
850# first so other bootstrap tools that need to apply patches
851# can use it.
17030342
MD
852# [x]install: dependancies on various new install features
853# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
854# envs are not compatible with older objformat binaries.
855#
cecff5c1 856.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
984263bc
MD
857_strfile= games/fortune/strfile
858.endif
859
e92bae40
MD
860# BSTRAPDIRS1 - must be built in strict order, no parallelism
861#
f3dd7aaa
MD
862# order is very important. yacc before m4 before flex. flex exec's m4,
863# m4's parser file needs the latest byacc (insanity!).
864#
e92bae40 865BSTRAPDIRS1= ${_strfile} \
d2e9c9d8
MD
866 usr.bin/patch \
867 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \
868 bin/test bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
869 bin/hostname bin/kill \
f3dd7aaa
MD
870 usr.bin/yacc usr.bin/m4 usr.bin/colldef \
871 usr.bin/uudecode usr.bin/xinstall \
872 usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \
e92bae40
MD
873 usr.bin/find usr.bin/flex
874
875# BSTRAPDIRS2 - may built in parallel
876#
877BSTRAPDIRS2= \
878 usr.bin/sed usr.bin/uname usr.bin/touch \
d2e9c9d8
MD
879 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
880 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
881 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
882 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
883 usr.bin/cap_mkdb usr.bin/true usr.bin/false \
884 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
8c4a123d 885 usr.bin/tail usr.bin/unifdef usr.bin/tic \
d2e9c9d8
MD
886 usr.sbin/chown usr.sbin/mtree usr.sbin/config \
887 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
8af27ce3
JM
888 gnu/usr.bin/grep usr.bin/sort usr.bin/gzip usr.bin/bzip2 \
889 usr.bin/mkcsmapper usr.bin/mkesdb usr.bin/crunch
d2e9c9d8 890
e92bae40 891bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
d2e9c9d8
MD
892 touch ${BTOOLSDEST}/.bootstrap_done
893
894bootstrap-tools-before:
062db326 895 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
d2e9c9d8 896
e92bae40
MD
897bootstrap-tools-targets1: ${BSTRAPDIRS1:S/^/bstrap-/}
898
899bootstrap-tools-targets2: ${BSTRAPDIRS2:S/^/bstrap-/}
900
901.ORDER: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
d2e9c9d8 902
e92bae40 903.ORDER: ${BSTRAPDIRS1:S/^/bstrap-/}
d2e9c9d8 904
e92bae40 905.for _tool in ${BSTRAPDIRS1} ${BSTRAPDIRS2}
d2e9c9d8 906bstrap-${_tool}!
1397f94a 907 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
984263bc 908 cd ${.CURDIR}/${_tool}; \
f8a75064
JM
909 make DIRPRFX=${_tool}/ obj; \
910 make DIRPRFX=${_tool}/ depend; \
911 make DIRPRFX=${_tool}/ all; \
912 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
984263bc
MD
913.endfor
914
bceb727e 915# build-tools: Build special purpose build tools.
984263bc 916#
1397f94a
MD
917# XXX we may be able to remove or consolidate this into bootstrap-tools
918# now that we have the native helper (.nx/.no) infrastructure.
919#
cecff5c1 920.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
984263bc
MD
921_share= share/syscons/scrnmaps
922.endif
923
b399af11
JM
924_gcc_common_cross= lib/libz gnu/usr.bin/gmp gnu/usr.bin/mpfr gnu/usr.bin/mpc
925.if !defined(NO_GCC50)
926_gcc50_cross= gnu/usr.bin/cc50
927_gcc50_tools= gnu/usr.bin/cc50/cc_prep gnu/usr.bin/cc50/cc_tools
6100d1de 928.endif
b399af11 929_gcc47_cross= gnu/usr.bin/cc47
f0140465 930_gcc47_tools= gnu/usr.bin/cc47/cc_prep gnu/usr.bin/cc47/cc_tools
c97b9141 931_custom_cross= libexec/customcc
123dec51 932_binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
17030342 933
b399af11 934BTOOLSDIRS= ${_gcc47_tools} ${_gcc50_tools} ${_share}
d2e9c9d8
MD
935
936build-tools: build-tools-targets
937 touch ${BTOOLSDEST}/.build_done
938
939build-tools-targets: ${BTOOLSDIRS:S/^/btools-/}
940
f0140465 941.ORDER: ${_gcc47_tools:S/^/btools-/}
b399af11 942.ORDER: ${_gcc50_tools:S/^/btools-/}
9ba72882 943
d2e9c9d8
MD
944.for _tool in ${BTOOLSDIRS}
945btools-${_tool}!
1397f94a 946 ${ECHODIR} "===> ${_tool} (build-tools)"; \
984263bc 947 cd ${.CURDIR}/${_tool}; \
f8a75064
JM
948 make DIRPRFX=${_tool}/ obj; \
949 make DIRPRFX=${_tool}/ depend; \
950 make DIRPRFX=${_tool}/ all; \
951 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
984263bc
MD
952.endfor
953
954#
955# cross-tools: Build cross-building tools
956#
984263bc
MD
957.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
958_btxld= usr.sbin/btxld
959.endif
960
fc7e83fa
FT
961CTOOLSDIRS= ${_btxld} ${_binutils} \
962 usr.bin/objformat usr.bin/crunch/crunchide \
963 ${_gcc_common_cross} \
b399af11 964 ${_gcc47_cross} ${_gcc50_cross} ${_custom_cross}
d2e9c9d8
MD
965
966cross-tools: cross-tools-targets
967 touch ${CTOOLSDEST}/.cross_done
968
969cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/}
970
971.for _tool in ${CTOOLSDIRS}
972ctools-${_tool}!
1397f94a 973 ${ECHODIR} "===> ${_tool} (cross-tools)"; \
984263bc 974 cd ${.CURDIR}/${_tool}; \
f8a75064
JM
975 make DIRPRFX=${_tool}/ obj; \
976 make DIRPRFX=${_tool}/ depend; \
977 make DIRPRFX=${_tool}/ all; \
978 make DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
984263bc
MD
979.endfor
980
981#
982# hierarchy - ensure that all the needed directories are present
983#
984hierarchy:
f8a75064 985 cd ${.CURDIR}/etc; make distrib-dirs
984263bc
MD
986
987#
988# libraries - build all libraries, and install them under ${DESTDIR}.
989#
990# The list of libraries with dependents (${_prebuild_libs}) and their
991# interdependencies (__L) are built automatically by the
992# ${.CURDIR}/tools/make_libdeps.sh script.
993#
5228fe46
MD
994# .makeenv does not work when bootstrapping from 4.x, so we must be sure
995# to specify the correct CCVER or 'cc' will not exec the correct compiler.
996#
984263bc 997libraries:
ddf7cc86 998 cd ${.CURDIR}; \
f0140465 999 HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \
7a1f111f 1000 make -f Makefile.inc1 _startup_libs47 -DSYSBUILD;
b399af11 1001.if !defined(NO_GCC50)
4f5ea479 1002 cd ${.CURDIR}; \
b399af11 1003 HOST_CCVER=${HOST_CCVER} CCVER=gcc50 \
7a1f111f 1004 make -f Makefile.inc1 _startup_libs50 -DSYSBUILD;
6100d1de 1005.endif
29d48e65 1006 cd ${.CURDIR}; \
7a1f111f
JM
1007 make -f Makefile.inc1 _startup_libs -DSYSBUILD; \
1008 make -f Makefile.inc1 _prebuild_libs -DSYSBUILD; \
1009 make -f Makefile.inc1 _generic_libs -DSYSBUILD;
e05c8c84 1010 touch ${WORLDDEST}/.libraries_done
984263bc
MD
1011
1012# These dependencies are not automatically generated:
1013#
fd8b66cd 1014# gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
4f5ea479
SS
1015# shared libraries for ELF. The target for _startup_libsXX is
1016# specifically built using gccXX.
984263bc 1017#
64ed7155
JM
1018_startup_libs47= gnu/usr.bin/cc47/cc_prep \
1019 gnu/usr.bin/cc47/cc_tools \
1020 gnu/lib/gcc47/csu \
f0140465
JM
1021 gnu/lib/gcc47/libgcc \
1022 gnu/lib/gcc47/libgcc_eh \
1023 gnu/lib/gcc47/libgcc_pic
b399af11
JM
1024_startup_libs50= gnu/usr.bin/cc50/cc_prep \
1025 gnu/usr.bin/cc50/cc_tools \
1026 gnu/lib/gcc50/csu \
1027 gnu/lib/gcc50/libgcc \
1028 gnu/lib/gcc50/libgcc_eh \
1029 gnu/lib/gcc50/libgcc_pic
e1da6819 1030_startup_libs= lib/csu lib/libc lib/libc_rtld
984263bc 1031
59392a00 1032_prebuild_libs= lib/libbz2 lib/liblzma lib/libz
0b153c05 1033_prebuild_libs+= lib/libutil
984263bc
MD
1034
1035_generic_libs= gnu/lib
1036
984263bc 1037_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
6d0e03f5 1038 lib/libncurses/libncurses lib/libopie
984263bc
MD
1039
1040lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
984263bc
MD
1041
1042_generic_libs+= lib
1043
cecff5c1 1044.if !defined(NO_CRYPT)
984263bc
MD
1045.if !defined(NO_OPENSSL)
1046_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
1047.if !defined(NO_OPENSSH)
1048_prebuild_libs+= secure/lib/libssh
1049secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
1050.endif
1051.endif
1052_generic_libs+= secure/lib
1053.endif
1054
6d0e03f5
MD
1055_prebuild_libs+= lib/libradius lib/libsbuf lib/libtacplus lib/libm \
1056 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} \
1057 lib/libpthread lib/libprop lib/libdevattr
1058
f506e60d 1059_generic_libs+= usr.bin/flex/lib
984263bc 1060
b399af11 1061.for _lib in ${_startup_libs47} ${_startup_libs50} \
4db2a28c 1062 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
984263bc
MD
1063${_lib}__L: .PHONY
1064.if exists(${.CURDIR}/${_lib})
1065 ${ECHODIR} "===> ${_lib}"; \
1066 cd ${.CURDIR}/${_lib}; \
f8a75064
JM
1067 make DIRPRFX=${_lib}/ depend; \
1068 make DIRPRFX=${_lib}/ all; \
1069 make DIRPRFX=${_lib}/ install
984263bc
MD
1070.endif
1071.endfor
1072
1073_startup_libs: ${_startup_libs:S/$/__L/}
f0140465 1074_startup_libs47: ${_startup_libs47:S/$/__L/}
b399af11 1075_startup_libs50: ${_startup_libs50:S/$/__L/}
984263bc
MD
1076_prebuild_libs: ${_prebuild_libs:S/$/__L/}
1077_generic_libs: ${_generic_libs:S/$/__L/}
1078
1397f94a
MD
1079# library targets must be ordered because there are inter-library
1080# races (e.g. generation of tconfig.h)
1081#
f0140465 1082.ORDER: ${_startup_libs47:S/$/__L/}
b399af11 1083.ORDER: ${_startup_libs50:S/$/__L/}
1397f94a
MD
1084.ORDER: ${_startup_libs:S/$/__L/}
1085.ORDER: ${_prebuild_libs:S/$/__L/}
1086.ORDER: ${_generic_libs:S/$/__L/}
1087
1088.for __target in clean cleandepend cleandir obj depend includes
984263bc
MD
1089.for entry in ${SUBDIR}
1090${entry}.${__target}__D: .PHONY
1091 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
1092 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
1093 edir=${entry}.${MACHINE_ARCH}; \
1094 cd ${.CURDIR}/$${edir}; \
1095 else \
1096 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
1097 edir=${entry}; \
1098 cd ${.CURDIR}/$${edir}; \
1099 fi; \
f8a75064 1100 make ${__target} DIRPRFX=${DIRPRFX}$${edir}/
984263bc
MD
1101.endfor
1102par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
1397f94a 1103.ORDER: ${SUBDIR:S/$/.${__target}__D/}
984263bc 1104.endfor
1397f94a 1105.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
984263bc 1106
cb0f1574
MD
1107# The wmake target is used by /usr/bin/wmake to run make in a
1108# world build environment.
1109#
1110wmake:
7a1f111f 1111 @echo '${WMAKEENV} make ${WMAKE_ARGS} -DSYSBUILD'
cb0f1574 1112
5c7da0d7
MD
1113wmakeenv:
1114 @echo '${WMAKEENV} /bin/sh'
1115
1397f94a 1116bmake:
7a1f111f 1117 @echo '${BMAKEENV} make ${BMAKE_ARGS} -DSYSBUILD'
1397f94a 1118
17030342
MD
1119bmakeenv:
1120 @echo '${BMAKEENV} /bin/sh'
1121
1397f94a 1122tmake:
7a1f111f 1123 @echo '${TMAKEENV} make ${TMAKE_ARGS} -DSYSBUILD'
1397f94a 1124
17030342
MD
1125tmakeenv:
1126 @echo '${TMAKEENV} /bin/sh'
1127
66834c05 1128xmake:
7a1f111f 1129 @echo '${XMAKEENV} make ${XMAKE_ARGS} -DSYSBUILD'
66834c05
SS
1130
1131xmakeenv:
1132 @echo '${XMAKEENV} /bin/sh'
1133
2decc9b9 1134backupworld: backup-clean
7bee86c0 1135 @mkdir -p ${WORLD_BACKUP}
2decc9b9
JM
1136.if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1137 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1138 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1139 tar -czf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1140 --options gzip:compression-level=1 \
1141 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1142.endif
61443441
JM
1143
1144backupworld-auto:
2decc9b9
JM
1145.if !defined(NO_BACKUP)
1146 rm -f ${AUTO_BACKUP}/binaries.tar.gz
61443441 1147 @mkdir -p ${AUTO_BACKUP}
2decc9b9
JM
1148.if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1149 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1150 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
5738cc3a 1151 /usr/bin/tar -czf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
2decc9b9
JM
1152 --options gzip:compression-level=1 \
1153 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1154.endif
aaae54f7 1155.endif
7bee86c0 1156
2decc9b9
JM
1157backup-auto-clean:
1158 rm -f ${AUTO_BACKUP}/binaries.tar.gz
1159
1160backup-clean:
1161 rm -f ${WORLD_BACKUP}/binaries.tar.gz
1162
7bee86c0 1163restoreworld:
2decc9b9 1164.if !exists(${WORLD_BACKUP}/binaries.tar.gz)
7bee86c0
JM
1165 @echo "There does not seem to be a valid archive present."
1166.else
61443441 1167 @echo "Restoring system binaries from manual backup archive..."
2decc9b9
JM
1168 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1169 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1170 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1171 tar -xzf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
7bee86c0
JM
1172.endif
1173
61443441 1174restoreworld-auto:
2decc9b9 1175.if !exists(${AUTO_BACKUP}/binaries.tar.gz)
61443441
JM
1176 @echo "There does not seem to be a valid archive present."
1177.else
1178 @echo "Restoring system binaries from auto-backup archive..."
2decc9b9
JM
1179 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1180 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1181 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1182 tar -xzf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
61443441
JM
1183.endif
1184
3da8e88f
JM
1185# Take advantage of bmake error response
1186#
1187MAKE_PRINT_VAR_ON_ERROR= \
1188 .CURDIR \
1189 .OBJDIR \
3da8e88f
JM
1190 LD_LIBRARY_PATH \
1191 MACHINE_ARCH \
1192 MACHINE \
1193 MAKEFILE \
1194 .TARGETS \
1195 .ERROR_TARGET \
61443441 1196 .MAKE.LEVEL
3da8e88f 1197
984263bc 1198.include <bsd.subdir.mk>