bnx: Don't peek at the TX descriptor in txeof()
[dragonfly.git] / sys / dev / netif / bnx / if_bnx.c
CommitLineData
6c8d8ecc
SZ
1/*
2 * Copyright (c) 2001 Wind River Systems
3 * Copyright (c) 1997, 1998, 1999, 2001
4 * Bill Paul <wpaul@windriver.com>. All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. All advertising materials mentioning features or use of this software
15 * must display the following acknowledgement:
16 * This product includes software developed by Bill Paul.
17 * 4. Neither the name of the author nor the names of any co-contributors
18 * may be used to endorse or promote products derived from this software
19 * without specific prior written permission.
20 *
21 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
31 * THE POSSIBILITY OF SUCH DAMAGE.
32 *
33 * $FreeBSD: src/sys/dev/bge/if_bge.c,v 1.3.2.39 2005/07/03 03:41:18 silby Exp $
34 */
35
66deb1c1 36#include "opt_bnx.h"
6c8d8ecc
SZ
37#include "opt_polling.h"
38
39#include <sys/param.h>
40#include <sys/bus.h>
41#include <sys/endian.h>
42#include <sys/kernel.h>
43#include <sys/interrupt.h>
44#include <sys/mbuf.h>
45#include <sys/malloc.h>
46#include <sys/queue.h>
47#include <sys/rman.h>
48#include <sys/serialize.h>
49#include <sys/socket.h>
50#include <sys/sockio.h>
51#include <sys/sysctl.h>
52
66deb1c1
SZ
53#include <netinet/ip.h>
54#include <netinet/tcp.h>
55
6c8d8ecc
SZ
56#include <net/bpf.h>
57#include <net/ethernet.h>
58#include <net/if.h>
59#include <net/if_arp.h>
60#include <net/if_dl.h>
61#include <net/if_media.h>
62#include <net/if_types.h>
63#include <net/ifq_var.h>
64#include <net/vlan/if_vlan_var.h>
65#include <net/vlan/if_vlan_ether.h>
66
67#include <dev/netif/mii_layer/mii.h>
68#include <dev/netif/mii_layer/miivar.h>
69#include <dev/netif/mii_layer/brgphyreg.h>
70
71#include <bus/pci/pcidevs.h>
72#include <bus/pci/pcireg.h>
73#include <bus/pci/pcivar.h>
74
75#include <dev/netif/bge/if_bgereg.h>
76#include <dev/netif/bnx/if_bnxvar.h>
77
78/* "device miibus" required. See GENERIC if you get errors here. */
79#include "miibus_if.h"
80
3b18363f 81#define BNX_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP)
6c8d8ecc 82
df9ccc98
SZ
83#define BNX_INTR_CKINTVL ((10 * hz) / 1000) /* 10ms */
84
6c8d8ecc
SZ
85static const struct bnx_type {
86 uint16_t bnx_vid;
87 uint16_t bnx_did;
88 char *bnx_name;
89} bnx_devs[] = {
90 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5717,
91 "Broadcom BCM5717 Gigabit Ethernet" },
92 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5718,
93 "Broadcom BCM5718 Gigabit Ethernet" },
94 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5719,
95 "Broadcom BCM5719 Gigabit Ethernet" },
96 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM5720_ALT,
97 "Broadcom BCM5720 Gigabit Ethernet" },
98
99 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM57761,
100 "Broadcom BCM57761 Gigabit Ethernet" },
32ff3c80
SZ
101 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM57762,
102 "Broadcom BCM57762 Gigabit Ethernet" },
6c8d8ecc
SZ
103 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM57765,
104 "Broadcom BCM57765 Gigabit Ethernet" },
32ff3c80
SZ
105 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM57766,
106 "Broadcom BCM57766 Gigabit Ethernet" },
107 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM57781,
108 "Broadcom BCM57781 Gigabit Ethernet" },
109 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM57782,
110 "Broadcom BCM57782 Gigabit Ethernet" },
6c8d8ecc
SZ
111 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM57785,
112 "Broadcom BCM57785 Gigabit Ethernet" },
32ff3c80
SZ
113 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM57786,
114 "Broadcom BCM57786 Gigabit Ethernet" },
115 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM57791,
116 "Broadcom BCM57791 Fast Ethernet" },
6c8d8ecc
SZ
117 { PCI_VENDOR_BROADCOM, PCI_PRODUCT_BROADCOM_BCM57795,
118 "Broadcom BCM57795 Fast Ethernet" },
119
120 { 0, 0, NULL }
121};
122
123#define BNX_IS_JUMBO_CAPABLE(sc) ((sc)->bnx_flags & BNX_FLAG_JUMBO)
124#define BNX_IS_5717_PLUS(sc) ((sc)->bnx_flags & BNX_FLAG_5717_PLUS)
f368d0d9
SZ
125#define BNX_IS_57765_PLUS(sc) ((sc)->bnx_flags & BNX_FLAG_57765_PLUS)
126#define BNX_IS_57765_FAMILY(sc) \
127 ((sc)->bnx_flags & BNX_FLAG_57765_FAMILY)
6c8d8ecc
SZ
128
129typedef int (*bnx_eaddr_fcn_t)(struct bnx_softc *, uint8_t[]);
130
131static int bnx_probe(device_t);
132static int bnx_attach(device_t);
133static int bnx_detach(device_t);
134static void bnx_shutdown(device_t);
135static int bnx_suspend(device_t);
136static int bnx_resume(device_t);
137static int bnx_miibus_readreg(device_t, int, int);
138static int bnx_miibus_writereg(device_t, int, int, int);
139static void bnx_miibus_statchg(device_t);
140
141#ifdef DEVICE_POLLING
142static void bnx_poll(struct ifnet *ifp, enum poll_cmd cmd, int count);
143#endif
144static void bnx_intr_legacy(void *);
145static void bnx_msi(void *);
146static void bnx_msi_oneshot(void *);
147static void bnx_intr(struct bnx_softc *);
148static void bnx_enable_intr(struct bnx_softc *);
149static void bnx_disable_intr(struct bnx_softc *);
150static void bnx_txeof(struct bnx_softc *, uint16_t);
151static void bnx_rxeof(struct bnx_softc *, uint16_t);
152
153static void bnx_start(struct ifnet *);
154static int bnx_ioctl(struct ifnet *, u_long, caddr_t, struct ucred *);
155static void bnx_init(void *);
156static void bnx_stop(struct bnx_softc *);
157static void bnx_watchdog(struct ifnet *);
158static int bnx_ifmedia_upd(struct ifnet *);
159static void bnx_ifmedia_sts(struct ifnet *, struct ifmediareq *);
160static void bnx_tick(void *);
161
162static int bnx_alloc_jumbo_mem(struct bnx_softc *);
163static void bnx_free_jumbo_mem(struct bnx_softc *);
164static struct bnx_jslot
165 *bnx_jalloc(struct bnx_softc *);
166static void bnx_jfree(void *);
167static void bnx_jref(void *);
168static int bnx_newbuf_std(struct bnx_softc *, int, int);
169static int bnx_newbuf_jumbo(struct bnx_softc *, int, int);
170static void bnx_setup_rxdesc_std(struct bnx_softc *, int);
171static void bnx_setup_rxdesc_jumbo(struct bnx_softc *, int);
172static int bnx_init_rx_ring_std(struct bnx_softc *);
173static void bnx_free_rx_ring_std(struct bnx_softc *);
174static int bnx_init_rx_ring_jumbo(struct bnx_softc *);
175static void bnx_free_rx_ring_jumbo(struct bnx_softc *);
176static void bnx_free_tx_ring(struct bnx_softc *);
177static int bnx_init_tx_ring(struct bnx_softc *);
178static int bnx_dma_alloc(struct bnx_softc *);
179static void bnx_dma_free(struct bnx_softc *);
180static int bnx_dma_block_alloc(struct bnx_softc *, bus_size_t,
181 bus_dma_tag_t *, bus_dmamap_t *, void **, bus_addr_t *);
182static void bnx_dma_block_free(bus_dma_tag_t, bus_dmamap_t, void *);
183static struct mbuf *
184 bnx_defrag_shortdma(struct mbuf *);
185static int bnx_encap(struct bnx_softc *, struct mbuf **, uint32_t *);
66deb1c1
SZ
186static int bnx_setup_tso(struct bnx_softc *, struct mbuf **,
187 uint16_t *, uint16_t *);
6c8d8ecc
SZ
188
189static void bnx_reset(struct bnx_softc *);
190static int bnx_chipinit(struct bnx_softc *);
191static int bnx_blockinit(struct bnx_softc *);
192static void bnx_stop_block(struct bnx_softc *, bus_size_t, uint32_t);
193static void bnx_enable_msi(struct bnx_softc *sc);
194static void bnx_setmulti(struct bnx_softc *);
195static void bnx_setpromisc(struct bnx_softc *);
196static void bnx_stats_update_regs(struct bnx_softc *);
197static uint32_t bnx_dma_swap_options(struct bnx_softc *);
198
199static uint32_t bnx_readmem_ind(struct bnx_softc *, uint32_t);
200static void bnx_writemem_ind(struct bnx_softc *, uint32_t, uint32_t);
201#ifdef notdef
202static uint32_t bnx_readreg_ind(struct bnx_softc *, uint32_t);
203#endif
204static void bnx_writereg_ind(struct bnx_softc *, uint32_t, uint32_t);
205static void bnx_writemem_direct(struct bnx_softc *, uint32_t, uint32_t);
206static void bnx_writembx(struct bnx_softc *, int, int);
207static uint8_t bnx_nvram_getbyte(struct bnx_softc *, int, uint8_t *);
208static int bnx_read_nvram(struct bnx_softc *, caddr_t, int, int);
209static uint8_t bnx_eeprom_getbyte(struct bnx_softc *, uint32_t, uint8_t *);
210static int bnx_read_eeprom(struct bnx_softc *, caddr_t, uint32_t, size_t);
211
212static void bnx_tbi_link_upd(struct bnx_softc *, uint32_t);
213static void bnx_copper_link_upd(struct bnx_softc *, uint32_t);
214static void bnx_autopoll_link_upd(struct bnx_softc *, uint32_t);
215static void bnx_link_poll(struct bnx_softc *);
216
217static int bnx_get_eaddr_mem(struct bnx_softc *, uint8_t[]);
218static int bnx_get_eaddr_nvram(struct bnx_softc *, uint8_t[]);
219static int bnx_get_eaddr_eeprom(struct bnx_softc *, uint8_t[]);
220static int bnx_get_eaddr(struct bnx_softc *, uint8_t[]);
221
222static void bnx_coal_change(struct bnx_softc *);
223static int bnx_sysctl_rx_coal_ticks(SYSCTL_HANDLER_ARGS);
224static int bnx_sysctl_tx_coal_ticks(SYSCTL_HANDLER_ARGS);
225static int bnx_sysctl_rx_coal_bds(SYSCTL_HANDLER_ARGS);
226static int bnx_sysctl_tx_coal_bds(SYSCTL_HANDLER_ARGS);
227static int bnx_sysctl_rx_coal_bds_int(SYSCTL_HANDLER_ARGS);
228static int bnx_sysctl_tx_coal_bds_int(SYSCTL_HANDLER_ARGS);
229static int bnx_sysctl_coal_chg(SYSCTL_HANDLER_ARGS, uint32_t *,
230 int, int, uint32_t);
231
232static int bnx_msi_enable = 1;
233TUNABLE_INT("hw.bnx.msi.enable", &bnx_msi_enable);
234
235static device_method_t bnx_methods[] = {
236 /* Device interface */
237 DEVMETHOD(device_probe, bnx_probe),
238 DEVMETHOD(device_attach, bnx_attach),
239 DEVMETHOD(device_detach, bnx_detach),
240 DEVMETHOD(device_shutdown, bnx_shutdown),
241 DEVMETHOD(device_suspend, bnx_suspend),
242 DEVMETHOD(device_resume, bnx_resume),
243
244 /* bus interface */
245 DEVMETHOD(bus_print_child, bus_generic_print_child),
246 DEVMETHOD(bus_driver_added, bus_generic_driver_added),
247
248 /* MII interface */
249 DEVMETHOD(miibus_readreg, bnx_miibus_readreg),
250 DEVMETHOD(miibus_writereg, bnx_miibus_writereg),
251 DEVMETHOD(miibus_statchg, bnx_miibus_statchg),
252
253 { 0, 0 }
254};
255
256static DEFINE_CLASS_0(bnx, bnx_driver, bnx_methods, sizeof(struct bnx_softc));
257static devclass_t bnx_devclass;
258
259DECLARE_DUMMY_MODULE(if_bnx);
260DRIVER_MODULE(if_bnx, pci, bnx_driver, bnx_devclass, NULL, NULL);
261DRIVER_MODULE(miibus, bnx, miibus_driver, miibus_devclass, NULL, NULL);
262
263static uint32_t
264bnx_readmem_ind(struct bnx_softc *sc, uint32_t off)
265{
266 device_t dev = sc->bnx_dev;
267 uint32_t val;
268
269 if (sc->bnx_asicrev == BGE_ASICREV_BCM5906 &&
270 off >= BGE_STATS_BLOCK && off < BGE_SEND_RING_1_TO_4)
271 return 0;
272
273 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4);
274 val = pci_read_config(dev, BGE_PCI_MEMWIN_DATA, 4);
275 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, 0, 4);
276 return (val);
277}
278
279static void
280bnx_writemem_ind(struct bnx_softc *sc, uint32_t off, uint32_t val)
281{
282 device_t dev = sc->bnx_dev;
283
284 if (sc->bnx_asicrev == BGE_ASICREV_BCM5906 &&
285 off >= BGE_STATS_BLOCK && off < BGE_SEND_RING_1_TO_4)
286 return;
287
288 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, off, 4);
289 pci_write_config(dev, BGE_PCI_MEMWIN_DATA, val, 4);
290 pci_write_config(dev, BGE_PCI_MEMWIN_BASEADDR, 0, 4);
291}
292
293#ifdef notdef
294static uint32_t
295bnx_readreg_ind(struct bnx_softc *sc, uin32_t off)
296{
297 device_t dev = sc->bnx_dev;
298
299 pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4);
300 return(pci_read_config(dev, BGE_PCI_REG_DATA, 4));
301}
302#endif
303
304static void
305bnx_writereg_ind(struct bnx_softc *sc, uint32_t off, uint32_t val)
306{
307 device_t dev = sc->bnx_dev;
308
309 pci_write_config(dev, BGE_PCI_REG_BASEADDR, off, 4);
310 pci_write_config(dev, BGE_PCI_REG_DATA, val, 4);
311}
312
313static void
314bnx_writemem_direct(struct bnx_softc *sc, uint32_t off, uint32_t val)
315{
316 CSR_WRITE_4(sc, off, val);
317}
318
319static void
320bnx_writembx(struct bnx_softc *sc, int off, int val)
321{
322 if (sc->bnx_asicrev == BGE_ASICREV_BCM5906)
323 off += BGE_LPMBX_IRQ0_HI - BGE_MBX_IRQ0_HI;
324
325 CSR_WRITE_4(sc, off, val);
326}
327
328static uint8_t
329bnx_nvram_getbyte(struct bnx_softc *sc, int addr, uint8_t *dest)
330{
331 uint32_t access, byte = 0;
332 int i;
333
334 /* Lock. */
335 CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_SET1);
336 for (i = 0; i < 8000; i++) {
337 if (CSR_READ_4(sc, BGE_NVRAM_SWARB) & BGE_NVRAMSWARB_GNT1)
338 break;
339 DELAY(20);
340 }
341 if (i == 8000)
342 return (1);
343
344 /* Enable access. */
345 access = CSR_READ_4(sc, BGE_NVRAM_ACCESS);
346 CSR_WRITE_4(sc, BGE_NVRAM_ACCESS, access | BGE_NVRAMACC_ENABLE);
347
348 CSR_WRITE_4(sc, BGE_NVRAM_ADDR, addr & 0xfffffffc);
349 CSR_WRITE_4(sc, BGE_NVRAM_CMD, BGE_NVRAM_READCMD);
350 for (i = 0; i < BNX_TIMEOUT * 10; i++) {
351 DELAY(10);
352 if (CSR_READ_4(sc, BGE_NVRAM_CMD) & BGE_NVRAMCMD_DONE) {
353 DELAY(10);
354 break;
355 }
356 }
357
358 if (i == BNX_TIMEOUT * 10) {
359 if_printf(&sc->arpcom.ac_if, "nvram read timed out\n");
360 return (1);
361 }
362
363 /* Get result. */
364 byte = CSR_READ_4(sc, BGE_NVRAM_RDDATA);
365
366 *dest = (bswap32(byte) >> ((addr % 4) * 8)) & 0xFF;
367
368 /* Disable access. */
369 CSR_WRITE_4(sc, BGE_NVRAM_ACCESS, access);
370
371 /* Unlock. */
372 CSR_WRITE_4(sc, BGE_NVRAM_SWARB, BGE_NVRAMSWARB_CLR1);
373 CSR_READ_4(sc, BGE_NVRAM_SWARB);
374
375 return (0);
376}
377
378/*
379 * Read a sequence of bytes from NVRAM.
380 */
381static int
382bnx_read_nvram(struct bnx_softc *sc, caddr_t dest, int off, int cnt)
383{
384 int err = 0, i;
385 uint8_t byte = 0;
386
387 if (sc->bnx_asicrev != BGE_ASICREV_BCM5906)
388 return (1);
389
390 for (i = 0; i < cnt; i++) {
391 err = bnx_nvram_getbyte(sc, off + i, &byte);
392 if (err)
393 break;
394 *(dest + i) = byte;
395 }
396
397 return (err ? 1 : 0);
398}
399
400/*
401 * Read a byte of data stored in the EEPROM at address 'addr.' The
402 * BCM570x supports both the traditional bitbang interface and an
403 * auto access interface for reading the EEPROM. We use the auto
404 * access method.
405 */
406static uint8_t
407bnx_eeprom_getbyte(struct bnx_softc *sc, uint32_t addr, uint8_t *dest)
408{
409 int i;
410 uint32_t byte = 0;
411
412 /*
413 * Enable use of auto EEPROM access so we can avoid
414 * having to use the bitbang method.
415 */
416 BNX_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_AUTO_EEPROM);
417
418 /* Reset the EEPROM, load the clock period. */
419 CSR_WRITE_4(sc, BGE_EE_ADDR,
420 BGE_EEADDR_RESET|BGE_EEHALFCLK(BGE_HALFCLK_384SCL));
421 DELAY(20);
422
423 /* Issue the read EEPROM command. */
424 CSR_WRITE_4(sc, BGE_EE_ADDR, BGE_EE_READCMD | addr);
425
426 /* Wait for completion */
427 for(i = 0; i < BNX_TIMEOUT * 10; i++) {
428 DELAY(10);
429 if (CSR_READ_4(sc, BGE_EE_ADDR) & BGE_EEADDR_DONE)
430 break;
431 }
432
433 if (i == BNX_TIMEOUT) {
434 if_printf(&sc->arpcom.ac_if, "eeprom read timed out\n");
435 return(1);
436 }
437
438 /* Get result. */
439 byte = CSR_READ_4(sc, BGE_EE_DATA);
440
441 *dest = (byte >> ((addr % 4) * 8)) & 0xFF;
442
443 return(0);
444}
445
446/*
447 * Read a sequence of bytes from the EEPROM.
448 */
449static int
450bnx_read_eeprom(struct bnx_softc *sc, caddr_t dest, uint32_t off, size_t len)
451{
452 size_t i;
453 int err;
454 uint8_t byte;
455
456 for (byte = 0, err = 0, i = 0; i < len; i++) {
457 err = bnx_eeprom_getbyte(sc, off + i, &byte);
458 if (err)
459 break;
460 *(dest + i) = byte;
461 }
462
463 return(err ? 1 : 0);
464}
465
466static int
467bnx_miibus_readreg(device_t dev, int phy, int reg)
468{
469 struct bnx_softc *sc = device_get_softc(dev);
470 uint32_t val;
471 int i;
472
473 KASSERT(phy == sc->bnx_phyno,
474 ("invalid phyno %d, should be %d", phy, sc->bnx_phyno));
475
476 /* Clear the autopoll bit if set, otherwise may trigger PCI errors. */
477 if (sc->bnx_mi_mode & BGE_MIMODE_AUTOPOLL) {
478 CSR_WRITE_4(sc, BGE_MI_MODE,
479 sc->bnx_mi_mode & ~BGE_MIMODE_AUTOPOLL);
480 DELAY(80);
481 }
482
483 CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_READ | BGE_MICOMM_BUSY |
484 BGE_MIPHY(phy) | BGE_MIREG(reg));
485
486 /* Poll for the PHY register access to complete. */
487 for (i = 0; i < BNX_TIMEOUT; i++) {
488 DELAY(10);
489 val = CSR_READ_4(sc, BGE_MI_COMM);
490 if ((val & BGE_MICOMM_BUSY) == 0) {
491 DELAY(5);
492 val = CSR_READ_4(sc, BGE_MI_COMM);
493 break;
494 }
495 }
496 if (i == BNX_TIMEOUT) {
497 if_printf(&sc->arpcom.ac_if, "PHY read timed out "
498 "(phy %d, reg %d, val 0x%08x)\n", phy, reg, val);
499 val = 0;
500 }
501
502 /* Restore the autopoll bit if necessary. */
503 if (sc->bnx_mi_mode & BGE_MIMODE_AUTOPOLL) {
504 CSR_WRITE_4(sc, BGE_MI_MODE, sc->bnx_mi_mode);
505 DELAY(80);
506 }
507
508 if (val & BGE_MICOMM_READFAIL)
509 return 0;
510
511 return (val & 0xFFFF);
512}
513
514static int
515bnx_miibus_writereg(device_t dev, int phy, int reg, int val)
516{
517 struct bnx_softc *sc = device_get_softc(dev);
518 int i;
519
520 KASSERT(phy == sc->bnx_phyno,
521 ("invalid phyno %d, should be %d", phy, sc->bnx_phyno));
522
523 if (sc->bnx_asicrev == BGE_ASICREV_BCM5906 &&
524 (reg == BRGPHY_MII_1000CTL || reg == BRGPHY_MII_AUXCTL))
525 return 0;
526
527 /* Clear the autopoll bit if set, otherwise may trigger PCI errors. */
528 if (sc->bnx_mi_mode & BGE_MIMODE_AUTOPOLL) {
529 CSR_WRITE_4(sc, BGE_MI_MODE,
530 sc->bnx_mi_mode & ~BGE_MIMODE_AUTOPOLL);
531 DELAY(80);
532 }
533
534 CSR_WRITE_4(sc, BGE_MI_COMM, BGE_MICMD_WRITE | BGE_MICOMM_BUSY |
535 BGE_MIPHY(phy) | BGE_MIREG(reg) | val);
536
537 for (i = 0; i < BNX_TIMEOUT; i++) {
538 DELAY(10);
539 if (!(CSR_READ_4(sc, BGE_MI_COMM) & BGE_MICOMM_BUSY)) {
540 DELAY(5);
541 CSR_READ_4(sc, BGE_MI_COMM); /* dummy read */
542 break;
543 }
544 }
545 if (i == BNX_TIMEOUT) {
546 if_printf(&sc->arpcom.ac_if, "PHY write timed out "
547 "(phy %d, reg %d, val %d)\n", phy, reg, val);
548 }
549
550 /* Restore the autopoll bit if necessary. */
551 if (sc->bnx_mi_mode & BGE_MIMODE_AUTOPOLL) {
552 CSR_WRITE_4(sc, BGE_MI_MODE, sc->bnx_mi_mode);
553 DELAY(80);
554 }
555
556 return 0;
557}
558
559static void
560bnx_miibus_statchg(device_t dev)
561{
562 struct bnx_softc *sc;
563 struct mii_data *mii;
564
565 sc = device_get_softc(dev);
566 mii = device_get_softc(sc->bnx_miibus);
567
568 if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) ==
569 (IFM_ACTIVE | IFM_AVALID)) {
570 switch (IFM_SUBTYPE(mii->mii_media_active)) {
571 case IFM_10_T:
572 case IFM_100_TX:
573 sc->bnx_link = 1;
574 break;
575 case IFM_1000_T:
576 case IFM_1000_SX:
577 case IFM_2500_SX:
578 if (sc->bnx_asicrev != BGE_ASICREV_BCM5906)
579 sc->bnx_link = 1;
580 else
581 sc->bnx_link = 0;
582 break;
583 default:
584 sc->bnx_link = 0;
585 break;
586 }
587 } else {
588 sc->bnx_link = 0;
589 }
590 if (sc->bnx_link == 0)
591 return;
592
593 BNX_CLRBIT(sc, BGE_MAC_MODE, BGE_MACMODE_PORTMODE);
594 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T ||
595 IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_SX) {
596 BNX_SETBIT(sc, BGE_MAC_MODE, BGE_PORTMODE_GMII);
597 } else {
598 BNX_SETBIT(sc, BGE_MAC_MODE, BGE_PORTMODE_MII);
599 }
600
601 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
602 BNX_CLRBIT(sc, BGE_MAC_MODE, BGE_MACMODE_HALF_DUPLEX);
603 } else {
604 BNX_SETBIT(sc, BGE_MAC_MODE, BGE_MACMODE_HALF_DUPLEX);
605 }
606}
607
608/*
609 * Memory management for jumbo frames.
610 */
611static int
612bnx_alloc_jumbo_mem(struct bnx_softc *sc)
613{
614 struct ifnet *ifp = &sc->arpcom.ac_if;
615 struct bnx_jslot *entry;
616 uint8_t *ptr;
617 bus_addr_t paddr;
618 int i, error;
619
620 /*
621 * Create tag for jumbo mbufs.
622 * This is really a bit of a kludge. We allocate a special
623 * jumbo buffer pool which (thanks to the way our DMA
624 * memory allocation works) will consist of contiguous
625 * pages. This means that even though a jumbo buffer might
626 * be larger than a page size, we don't really need to
627 * map it into more than one DMA segment. However, the
628 * default mbuf tag will result in multi-segment mappings,
629 * so we have to create a special jumbo mbuf tag that
630 * lets us get away with mapping the jumbo buffers as
631 * a single segment. I think eventually the driver should
632 * be changed so that it uses ordinary mbufs and cluster
633 * buffers, i.e. jumbo frames can span multiple DMA
634 * descriptors. But that's a project for another day.
635 */
636
637 /*
638 * Create DMA stuffs for jumbo RX ring.
639 */
640 error = bnx_dma_block_alloc(sc, BGE_JUMBO_RX_RING_SZ,
641 &sc->bnx_cdata.bnx_rx_jumbo_ring_tag,
642 &sc->bnx_cdata.bnx_rx_jumbo_ring_map,
643 (void *)&sc->bnx_ldata.bnx_rx_jumbo_ring,
644 &sc->bnx_ldata.bnx_rx_jumbo_ring_paddr);
645 if (error) {
646 if_printf(ifp, "could not create jumbo RX ring\n");
647 return error;
648 }
649
650 /*
651 * Create DMA stuffs for jumbo buffer block.
652 */
653 error = bnx_dma_block_alloc(sc, BNX_JMEM,
654 &sc->bnx_cdata.bnx_jumbo_tag,
655 &sc->bnx_cdata.bnx_jumbo_map,
656 (void **)&sc->bnx_ldata.bnx_jumbo_buf,
657 &paddr);
658 if (error) {
659 if_printf(ifp, "could not create jumbo buffer\n");
660 return error;
661 }
662
663 SLIST_INIT(&sc->bnx_jfree_listhead);
664
665 /*
666 * Now divide it up into 9K pieces and save the addresses
667 * in an array. Note that we play an evil trick here by using
668 * the first few bytes in the buffer to hold the the address
669 * of the softc structure for this interface. This is because
670 * bnx_jfree() needs it, but it is called by the mbuf management
671 * code which will not pass it to us explicitly.
672 */
673 for (i = 0, ptr = sc->bnx_ldata.bnx_jumbo_buf; i < BNX_JSLOTS; i++) {
674 entry = &sc->bnx_cdata.bnx_jslots[i];
675 entry->bnx_sc = sc;
676 entry->bnx_buf = ptr;
677 entry->bnx_paddr = paddr;
678 entry->bnx_inuse = 0;
679 entry->bnx_slot = i;
680 SLIST_INSERT_HEAD(&sc->bnx_jfree_listhead, entry, jslot_link);
681
682 ptr += BNX_JLEN;
683 paddr += BNX_JLEN;
684 }
685 return 0;
686}
687
688static void
689bnx_free_jumbo_mem(struct bnx_softc *sc)
690{
691 /* Destroy jumbo RX ring. */
692 bnx_dma_block_free(sc->bnx_cdata.bnx_rx_jumbo_ring_tag,
693 sc->bnx_cdata.bnx_rx_jumbo_ring_map,
694 sc->bnx_ldata.bnx_rx_jumbo_ring);
695
696 /* Destroy jumbo buffer block. */
697 bnx_dma_block_free(sc->bnx_cdata.bnx_jumbo_tag,
698 sc->bnx_cdata.bnx_jumbo_map,
699 sc->bnx_ldata.bnx_jumbo_buf);
700}
701
702/*
703 * Allocate a jumbo buffer.
704 */
705static struct bnx_jslot *
706bnx_jalloc(struct bnx_softc *sc)
707{
708 struct bnx_jslot *entry;
709
710 lwkt_serialize_enter(&sc->bnx_jslot_serializer);
711 entry = SLIST_FIRST(&sc->bnx_jfree_listhead);
712 if (entry) {
713 SLIST_REMOVE_HEAD(&sc->bnx_jfree_listhead, jslot_link);
714 entry->bnx_inuse = 1;
715 } else {
716 if_printf(&sc->arpcom.ac_if, "no free jumbo buffers\n");
717 }
718 lwkt_serialize_exit(&sc->bnx_jslot_serializer);
719 return(entry);
720}
721
722/*
723 * Adjust usage count on a jumbo buffer.
724 */
725static void
726bnx_jref(void *arg)
727{
728 struct bnx_jslot *entry = (struct bnx_jslot *)arg;
729 struct bnx_softc *sc = entry->bnx_sc;
730
731 if (sc == NULL)
732 panic("bnx_jref: can't find softc pointer!");
733
734 if (&sc->bnx_cdata.bnx_jslots[entry->bnx_slot] != entry) {
735 panic("bnx_jref: asked to reference buffer "
736 "that we don't manage!");
737 } else if (entry->bnx_inuse == 0) {
738 panic("bnx_jref: buffer already free!");
739 } else {
740 atomic_add_int(&entry->bnx_inuse, 1);
741 }
742}
743
744/*
745 * Release a jumbo buffer.
746 */
747static void
748bnx_jfree(void *arg)
749{
750 struct bnx_jslot *entry = (struct bnx_jslot *)arg;
751 struct bnx_softc *sc = entry->bnx_sc;
752
753 if (sc == NULL)
754 panic("bnx_jfree: can't find softc pointer!");
755
756 if (&sc->bnx_cdata.bnx_jslots[entry->bnx_slot] != entry) {
757 panic("bnx_jfree: asked to free buffer that we don't manage!");
758 } else if (entry->bnx_inuse == 0) {
759 panic("bnx_jfree: buffer already free!");
760 } else {
761 /*
762 * Possible MP race to 0, use the serializer. The atomic insn
763 * is still needed for races against bnx_jref().
764 */
765 lwkt_serialize_enter(&sc->bnx_jslot_serializer);
766 atomic_subtract_int(&entry->bnx_inuse, 1);
767 if (entry->bnx_inuse == 0) {
768 SLIST_INSERT_HEAD(&sc->bnx_jfree_listhead,
769 entry, jslot_link);
770 }
771 lwkt_serialize_exit(&sc->bnx_jslot_serializer);
772 }
773}
774
775
776/*
777 * Intialize a standard receive ring descriptor.
778 */
779static int
780bnx_newbuf_std(struct bnx_softc *sc, int i, int init)
781{
782 struct mbuf *m_new = NULL;
783 bus_dma_segment_t seg;
784 bus_dmamap_t map;
785 int error, nsegs;
786
787 m_new = m_getcl(init ? MB_WAIT : MB_DONTWAIT, MT_DATA, M_PKTHDR);
788 if (m_new == NULL)
789 return ENOBUFS;
790 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
791 m_adj(m_new, ETHER_ALIGN);
792
793 error = bus_dmamap_load_mbuf_segment(sc->bnx_cdata.bnx_rx_mtag,
794 sc->bnx_cdata.bnx_rx_tmpmap, m_new,
795 &seg, 1, &nsegs, BUS_DMA_NOWAIT);
796 if (error) {
797 m_freem(m_new);
798 return error;
799 }
800
801 if (!init) {
802 bus_dmamap_sync(sc->bnx_cdata.bnx_rx_mtag,
803 sc->bnx_cdata.bnx_rx_std_dmamap[i],
804 BUS_DMASYNC_POSTREAD);
805 bus_dmamap_unload(sc->bnx_cdata.bnx_rx_mtag,
806 sc->bnx_cdata.bnx_rx_std_dmamap[i]);
807 }
808
809 map = sc->bnx_cdata.bnx_rx_tmpmap;
810 sc->bnx_cdata.bnx_rx_tmpmap = sc->bnx_cdata.bnx_rx_std_dmamap[i];
811 sc->bnx_cdata.bnx_rx_std_dmamap[i] = map;
812
813 sc->bnx_cdata.bnx_rx_std_chain[i].bnx_mbuf = m_new;
814 sc->bnx_cdata.bnx_rx_std_chain[i].bnx_paddr = seg.ds_addr;
815
816 bnx_setup_rxdesc_std(sc, i);
817 return 0;
818}
819
820static void
821bnx_setup_rxdesc_std(struct bnx_softc *sc, int i)
822{
823 struct bnx_rxchain *rc;
824 struct bge_rx_bd *r;
825
826 rc = &sc->bnx_cdata.bnx_rx_std_chain[i];
827 r = &sc->bnx_ldata.bnx_rx_std_ring[i];
828
829 r->bge_addr.bge_addr_lo = BGE_ADDR_LO(rc->bnx_paddr);
830 r->bge_addr.bge_addr_hi = BGE_ADDR_HI(rc->bnx_paddr);
831 r->bge_len = rc->bnx_mbuf->m_len;
832 r->bge_idx = i;
833 r->bge_flags = BGE_RXBDFLAG_END;
834}
835
836/*
837 * Initialize a jumbo receive ring descriptor. This allocates
838 * a jumbo buffer from the pool managed internally by the driver.
839 */
840static int
841bnx_newbuf_jumbo(struct bnx_softc *sc, int i, int init)
842{
843 struct mbuf *m_new = NULL;
844 struct bnx_jslot *buf;
845 bus_addr_t paddr;
846
847 /* Allocate the mbuf. */
848 MGETHDR(m_new, init ? MB_WAIT : MB_DONTWAIT, MT_DATA);
849 if (m_new == NULL)
850 return ENOBUFS;
851
852 /* Allocate the jumbo buffer */
853 buf = bnx_jalloc(sc);
854 if (buf == NULL) {
855 m_freem(m_new);
856 return ENOBUFS;
857 }
858
859 /* Attach the buffer to the mbuf. */
860 m_new->m_ext.ext_arg = buf;
861 m_new->m_ext.ext_buf = buf->bnx_buf;
862 m_new->m_ext.ext_free = bnx_jfree;
863 m_new->m_ext.ext_ref = bnx_jref;
864 m_new->m_ext.ext_size = BNX_JUMBO_FRAMELEN;
865
866 m_new->m_flags |= M_EXT;
867
868 m_new->m_data = m_new->m_ext.ext_buf;
869 m_new->m_len = m_new->m_pkthdr.len = m_new->m_ext.ext_size;
870
871 paddr = buf->bnx_paddr;
872 m_adj(m_new, ETHER_ALIGN);
873 paddr += ETHER_ALIGN;
874
875 /* Save necessary information */
876 sc->bnx_cdata.bnx_rx_jumbo_chain[i].bnx_mbuf = m_new;
877 sc->bnx_cdata.bnx_rx_jumbo_chain[i].bnx_paddr = paddr;
878
879 /* Set up the descriptor. */
880 bnx_setup_rxdesc_jumbo(sc, i);
881 return 0;
882}
883
884static void
885bnx_setup_rxdesc_jumbo(struct bnx_softc *sc, int i)
886{
887 struct bge_rx_bd *r;
888 struct bnx_rxchain *rc;
889
890 r = &sc->bnx_ldata.bnx_rx_jumbo_ring[i];
891 rc = &sc->bnx_cdata.bnx_rx_jumbo_chain[i];
892
893 r->bge_addr.bge_addr_lo = BGE_ADDR_LO(rc->bnx_paddr);
894 r->bge_addr.bge_addr_hi = BGE_ADDR_HI(rc->bnx_paddr);
895 r->bge_len = rc->bnx_mbuf->m_len;
896 r->bge_idx = i;
897 r->bge_flags = BGE_RXBDFLAG_END|BGE_RXBDFLAG_JUMBO_RING;
898}
899
900static int
901bnx_init_rx_ring_std(struct bnx_softc *sc)
902{
903 int i, error;
904
905 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) {
906 error = bnx_newbuf_std(sc, i, 1);
907 if (error)
908 return error;
909 };
910
911 sc->bnx_std = BGE_STD_RX_RING_CNT - 1;
912 bnx_writembx(sc, BGE_MBX_RX_STD_PROD_LO, sc->bnx_std);
913
914 return(0);
915}
916
917static void
918bnx_free_rx_ring_std(struct bnx_softc *sc)
919{
920 int i;
921
922 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) {
923 struct bnx_rxchain *rc = &sc->bnx_cdata.bnx_rx_std_chain[i];
924
925 if (rc->bnx_mbuf != NULL) {
926 bus_dmamap_unload(sc->bnx_cdata.bnx_rx_mtag,
927 sc->bnx_cdata.bnx_rx_std_dmamap[i]);
928 m_freem(rc->bnx_mbuf);
929 rc->bnx_mbuf = NULL;
930 }
931 bzero(&sc->bnx_ldata.bnx_rx_std_ring[i],
932 sizeof(struct bge_rx_bd));
933 }
934}
935
936static int
937bnx_init_rx_ring_jumbo(struct bnx_softc *sc)
938{
939 struct bge_rcb *rcb;
940 int i, error;
941
942 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) {
943 error = bnx_newbuf_jumbo(sc, i, 1);
944 if (error)
945 return error;
946 };
947
948 sc->bnx_jumbo = BGE_JUMBO_RX_RING_CNT - 1;
949
950 rcb = &sc->bnx_ldata.bnx_info.bnx_jumbo_rx_rcb;
951 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(0, 0);
952 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags);
953
954 bnx_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, sc->bnx_jumbo);
955
956 return(0);
957}
958
959static void
960bnx_free_rx_ring_jumbo(struct bnx_softc *sc)
961{
962 int i;
963
964 for (i = 0; i < BGE_JUMBO_RX_RING_CNT; i++) {
965 struct bnx_rxchain *rc = &sc->bnx_cdata.bnx_rx_jumbo_chain[i];
966
967 if (rc->bnx_mbuf != NULL) {
968 m_freem(rc->bnx_mbuf);
969 rc->bnx_mbuf = NULL;
970 }
971 bzero(&sc->bnx_ldata.bnx_rx_jumbo_ring[i],
972 sizeof(struct bge_rx_bd));
973 }
974}
975
976static void
977bnx_free_tx_ring(struct bnx_softc *sc)
978{
979 int i;
980
981 for (i = 0; i < BGE_TX_RING_CNT; i++) {
982 if (sc->bnx_cdata.bnx_tx_chain[i] != NULL) {
983 bus_dmamap_unload(sc->bnx_cdata.bnx_tx_mtag,
984 sc->bnx_cdata.bnx_tx_dmamap[i]);
985 m_freem(sc->bnx_cdata.bnx_tx_chain[i]);
986 sc->bnx_cdata.bnx_tx_chain[i] = NULL;
987 }
988 bzero(&sc->bnx_ldata.bnx_tx_ring[i],
989 sizeof(struct bge_tx_bd));
990 }
991}
992
993static int
994bnx_init_tx_ring(struct bnx_softc *sc)
995{
996 sc->bnx_txcnt = 0;
997 sc->bnx_tx_saved_considx = 0;
998 sc->bnx_tx_prodidx = 0;
999
1000 /* Initialize transmit producer index for host-memory send ring. */
1001 bnx_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, sc->bnx_tx_prodidx);
1002 bnx_writembx(sc, BGE_MBX_TX_NIC_PROD0_LO, 0);
1003
1004 return(0);
1005}
1006
1007static void
1008bnx_setmulti(struct bnx_softc *sc)
1009{
1010 struct ifnet *ifp;
1011 struct ifmultiaddr *ifma;
1012 uint32_t hashes[4] = { 0, 0, 0, 0 };
1013 int h, i;
1014
1015 ifp = &sc->arpcom.ac_if;
1016
1017 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
1018 for (i = 0; i < 4; i++)
1019 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0xFFFFFFFF);
1020 return;
1021 }
1022
1023 /* First, zot all the existing filters. */
1024 for (i = 0; i < 4; i++)
1025 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), 0);
1026
1027 /* Now program new ones. */
1028 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
1029 if (ifma->ifma_addr->sa_family != AF_LINK)
1030 continue;
1031 h = ether_crc32_le(
1032 LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
1033 ETHER_ADDR_LEN) & 0x7f;
1034 hashes[(h & 0x60) >> 5] |= 1 << (h & 0x1F);
1035 }
1036
1037 for (i = 0; i < 4; i++)
1038 CSR_WRITE_4(sc, BGE_MAR0 + (i * 4), hashes[i]);
1039}
1040
1041/*
1042 * Do endian, PCI and DMA initialization. Also check the on-board ROM
1043 * self-test results.
1044 */
1045static int
1046bnx_chipinit(struct bnx_softc *sc)
1047{
1048 uint32_t dma_rw_ctl, mode_ctl;
1049 int i;
1050
1051 /* Set endian type before we access any non-PCI registers. */
1052 pci_write_config(sc->bnx_dev, BGE_PCI_MISC_CTL,
1053 BGE_INIT | BGE_PCIMISCCTL_TAGGED_STATUS, 4);
1054
1055 /* Clear the MAC control register */
1056 CSR_WRITE_4(sc, BGE_MAC_MODE, 0);
1057
1058 /*
1059 * Clear the MAC statistics block in the NIC's
1060 * internal memory.
1061 */
1062 for (i = BGE_STATS_BLOCK;
1063 i < BGE_STATS_BLOCK_END + 1; i += sizeof(uint32_t))
1064 BNX_MEMWIN_WRITE(sc, i, 0);
1065
1066 for (i = BGE_STATUS_BLOCK;
1067 i < BGE_STATUS_BLOCK_END + 1; i += sizeof(uint32_t))
1068 BNX_MEMWIN_WRITE(sc, i, 0);
1069
d7872545
SZ
1070 if (BNX_IS_57765_FAMILY(sc)) {
1071 uint32_t val;
1072
1073 if (sc->bnx_chipid == BGE_CHIPID_BCM57765_A0) {
1074 mode_ctl = CSR_READ_4(sc, BGE_MODE_CTL);
1075 val = mode_ctl & ~BGE_MODECTL_PCIE_PORTS;
1076
1077 /* Access the lower 1K of PL PCI-E block registers. */
1078 CSR_WRITE_4(sc, BGE_MODE_CTL,
1079 val | BGE_MODECTL_PCIE_PL_SEL);
1080
1081 val = CSR_READ_4(sc, BGE_PCIE_PL_LO_PHYCTL5);
1082 val |= BGE_PCIE_PL_LO_PHYCTL5_DIS_L2CLKREQ;
1083 CSR_WRITE_4(sc, BGE_PCIE_PL_LO_PHYCTL5, val);
1084
1085 CSR_WRITE_4(sc, BGE_MODE_CTL, mode_ctl);
1086 }
1087 if (sc->bnx_chiprev != BGE_CHIPREV_57765_AX) {
1088 mode_ctl = CSR_READ_4(sc, BGE_MODE_CTL);
1089 val = mode_ctl & ~BGE_MODECTL_PCIE_PORTS;
1090
1091 /* Access the lower 1K of DL PCI-E block registers. */
1092 CSR_WRITE_4(sc, BGE_MODE_CTL,
1093 val | BGE_MODECTL_PCIE_DL_SEL);
1094
1095 val = CSR_READ_4(sc, BGE_PCIE_DL_LO_FTSMAX);
1096 val &= ~BGE_PCIE_DL_LO_FTSMAX_MASK;
1097 val |= BGE_PCIE_DL_LO_FTSMAX_VAL;
1098 CSR_WRITE_4(sc, BGE_PCIE_DL_LO_FTSMAX, val);
1099
1100 CSR_WRITE_4(sc, BGE_MODE_CTL, mode_ctl);
1101 }
1102
1103 val = CSR_READ_4(sc, BGE_CPMU_LSPD_10MB_CLK);
1104 val &= ~BGE_CPMU_LSPD_10MB_MACCLK_MASK;
1105 val |= BGE_CPMU_LSPD_10MB_MACCLK_6_25;
1106 CSR_WRITE_4(sc, BGE_CPMU_LSPD_10MB_CLK, val);
1107 }
1108
2890cca3
SZ
1109 /*
1110 * Set up the PCI DMA control register.
1111 */
1112 dma_rw_ctl = pci_read_config(sc->bnx_dev, BGE_PCI_DMA_RW_CTL, 4);
1113 /*
1114 * Disable 32bytes cache alignment for DMA write to host memory
1115 *
1116 * NOTE:
1117 * 64bytes cache alignment for DMA write to host memory is still
1118 * enabled.
1119 */
1120 dma_rw_ctl |= BGE_PCIDMARWCTL_DIS_CACHE_ALIGNMENT;
1121 if (sc->bnx_chipid == BGE_CHIPID_BCM57765_A0)
1122 dma_rw_ctl &= ~BGE_PCIDMARWCTL_CRDRDR_RDMA_MRRS_MSK;
1123 /*
1124 * Enable HW workaround for controllers that misinterpret
1125 * a status tag update and leave interrupts permanently
1126 * disabled.
1127 */
1128 if (sc->bnx_asicrev != BGE_ASICREV_BCM5717 &&
1129 !BNX_IS_57765_FAMILY(sc))
1130 dma_rw_ctl |= BGE_PCIDMARWCTL_TAGGED_STATUS_WA;
1131 if (bootverbose) {
1132 if_printf(&sc->arpcom.ac_if, "DMA read/write %#x\n",
1133 dma_rw_ctl);
6c8d8ecc
SZ
1134 }
1135 pci_write_config(sc->bnx_dev, BGE_PCI_DMA_RW_CTL, dma_rw_ctl, 4);
1136
1137 /*
1138 * Set up general mode register.
1139 */
1140 mode_ctl = bnx_dma_swap_options(sc) | BGE_MODECTL_MAC_ATTN_INTR |
1141 BGE_MODECTL_HOST_SEND_BDS | BGE_MODECTL_TX_NO_PHDR_CSUM;
1142 CSR_WRITE_4(sc, BGE_MODE_CTL, mode_ctl);
1143
1144 /*
1145 * Disable memory write invalidate. Apparently it is not supported
1146 * properly by these devices. Also ensure that INTx isn't disabled,
1147 * as these chips need it even when using MSI.
1148 */
1149 PCI_CLRBIT(sc->bnx_dev, BGE_PCI_CMD,
1150 (PCIM_CMD_MWRICEN | PCIM_CMD_INTxDIS), 4);
1151
1152 /* Set the timer prescaler (always 66Mhz) */
1153 CSR_WRITE_4(sc, BGE_MISC_CFG, 65 << 1/*BGE_32BITTIME_66MHZ*/);
1154
1155 if (sc->bnx_asicrev == BGE_ASICREV_BCM5906) {
1156 DELAY(40); /* XXX */
1157
1158 /* Put PHY into ready state */
1159 BNX_CLRBIT(sc, BGE_MISC_CFG, BGE_MISCCFG_EPHY_IDDQ);
1160 CSR_READ_4(sc, BGE_MISC_CFG); /* Flush */
1161 DELAY(40);
1162 }
1163
1164 return(0);
1165}
1166
1167static int
1168bnx_blockinit(struct bnx_softc *sc)
1169{
1170 struct bge_rcb *rcb;
1171 bus_size_t vrcb;
1172 bge_hostaddr taddr;
1173 uint32_t val;
1174 int i, limit;
1175
1176 /*
1177 * Initialize the memory window pointer register so that
1178 * we can access the first 32K of internal NIC RAM. This will
1179 * allow us to set up the TX send ring RCBs and the RX return
1180 * ring RCBs, plus other things which live in NIC memory.
1181 */
1182 CSR_WRITE_4(sc, BGE_PCI_MEMWIN_BASEADDR, 0);
1183
1184 /* Configure mbuf pool watermarks */
f368d0d9 1185 if (BNX_IS_57765_PLUS(sc)) {
6c8d8ecc
SZ
1186 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0);
1187 if (sc->arpcom.ac_if.if_mtu > ETHERMTU) {
1188 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x7e);
1189 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0xea);
1190 } else {
1191 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x2a);
1192 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0xa0);
1193 }
1194 } else if (sc->bnx_asicrev == BGE_ASICREV_BCM5906) {
1195 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0);
1196 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x04);
1197 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x10);
1198 } else {
1199 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0);
1200 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x10);
1201 CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x60);
1202 }
1203
1204 /* Configure DMA resource watermarks */
1205 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_LOWAT, 5);
1206 CSR_WRITE_4(sc, BGE_BMAN_DMA_DESCPOOL_HIWAT, 10);
1207
1208 /* Enable buffer manager */
1209 val = BGE_BMANMODE_ENABLE | BGE_BMANMODE_LOMBUF_ATTN;
1210 /*
1211 * Change the arbitration algorithm of TXMBUF read request to
1212 * round-robin instead of priority based for BCM5719. When
1213 * TXFIFO is almost empty, RDMA will hold its request until
1214 * TXFIFO is not almost empty.
1215 */
1216 if (sc->bnx_asicrev == BGE_ASICREV_BCM5719)
1217 val |= BGE_BMANMODE_NO_TX_UNDERRUN;
e5eebe34
SZ
1218 if (sc->bnx_asicrev == BGE_ASICREV_BCM5717 ||
1219 sc->bnx_chipid == BGE_CHIPID_BCM5719_A0 ||
1220 sc->bnx_chipid == BGE_CHIPID_BCM5720_A0)
1221 val |= BGE_BMANMODE_LOMBUF_ATTN;
6c8d8ecc
SZ
1222 CSR_WRITE_4(sc, BGE_BMAN_MODE, val);
1223
1224 /* Poll for buffer manager start indication */
1225 for (i = 0; i < BNX_TIMEOUT; i++) {
1226 if (CSR_READ_4(sc, BGE_BMAN_MODE) & BGE_BMANMODE_ENABLE)
1227 break;
1228 DELAY(10);
1229 }
1230
1231 if (i == BNX_TIMEOUT) {
1232 if_printf(&sc->arpcom.ac_if,
1233 "buffer manager failed to start\n");
1234 return(ENXIO);
1235 }
1236
1237 /* Enable flow-through queues */
1238 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF);
1239 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0);
1240
1241 /* Wait until queue initialization is complete */
1242 for (i = 0; i < BNX_TIMEOUT; i++) {
1243 if (CSR_READ_4(sc, BGE_FTQ_RESET) == 0)
1244 break;
1245 DELAY(10);
1246 }
1247
1248 if (i == BNX_TIMEOUT) {
1249 if_printf(&sc->arpcom.ac_if,
1250 "flow-through queue init failed\n");
1251 return(ENXIO);
1252 }
1253
1254 /*
1255 * Summary of rings supported by the controller:
1256 *
1257 * Standard Receive Producer Ring
1258 * - This ring is used to feed receive buffers for "standard"
1259 * sized frames (typically 1536 bytes) to the controller.
1260 *
1261 * Jumbo Receive Producer Ring
1262 * - This ring is used to feed receive buffers for jumbo sized
1263 * frames (i.e. anything bigger than the "standard" frames)
1264 * to the controller.
1265 *
1266 * Mini Receive Producer Ring
1267 * - This ring is used to feed receive buffers for "mini"
1268 * sized frames to the controller.
1269 * - This feature required external memory for the controller
1270 * but was never used in a production system. Should always
1271 * be disabled.
1272 *
1273 * Receive Return Ring
1274 * - After the controller has placed an incoming frame into a
1275 * receive buffer that buffer is moved into a receive return
1276 * ring. The driver is then responsible to passing the
1277 * buffer up to the stack. Many versions of the controller
1278 * support multiple RR rings.
1279 *
1280 * Send Ring
1281 * - This ring is used for outgoing frames. Many versions of
1282 * the controller support multiple send rings.
1283 */
1284
1285 /* Initialize the standard receive producer ring control block. */
1286 rcb = &sc->bnx_ldata.bnx_info.bnx_std_rx_rcb;
1287 rcb->bge_hostaddr.bge_addr_lo =
1288 BGE_ADDR_LO(sc->bnx_ldata.bnx_rx_std_ring_paddr);
1289 rcb->bge_hostaddr.bge_addr_hi =
1290 BGE_ADDR_HI(sc->bnx_ldata.bnx_rx_std_ring_paddr);
f368d0d9 1291 if (BNX_IS_57765_PLUS(sc)) {
6c8d8ecc
SZ
1292 /*
1293 * Bits 31-16: Programmable ring size (2048, 1024, 512, .., 32)
1294 * Bits 15-2 : Maximum RX frame size
1295 * Bit 1 : 1 = Ring Disabled, 0 = Ring ENabled
1296 * Bit 0 : Reserved
1297 */
1298 rcb->bge_maxlen_flags =
1299 BGE_RCB_MAXLEN_FLAGS(512, BNX_MAX_FRAMELEN << 2);
1300 } else {
1301 /*
1302 * Bits 31-16: Programmable ring size (512, 256, 128, 64, 32)
1303 * Bits 15-2 : Reserved (should be 0)
1304 * Bit 1 : 1 = Ring Disabled, 0 = Ring Enabled
1305 * Bit 0 : Reserved
1306 */
1307 rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(512, 0);
1308 }
303fdc72 1309 if (BNX_IS_5717_PLUS(sc))
6c8d8ecc
SZ
1310 rcb->bge_nicaddr = BGE_STD_RX_RINGS_5717;
1311 else
1312 rcb->bge_nicaddr = BGE_STD_RX_RINGS;
1313 /* Write the standard receive producer ring control block. */
1314 CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_HI, rcb->bge_hostaddr.bge_addr_hi);
1315 CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_LO, rcb->bge_hostaddr.bge_addr_lo);
1316 CSR_WRITE_4(sc, BGE_RX_STD_RCB_MAXLEN_FLAGS, rcb->bge_maxlen_flags);
1317 CSR_WRITE_4(sc, BGE_RX_STD_RCB_NICADDR, rcb->bge_nicaddr);
1318 /* Reset the standard receive producer ring producer index. */
1319 bnx_writembx(sc, BGE_MBX_RX_STD_PROD_LO, 0);
1320
1321 /*
1322 * Initialize the jumbo RX producer ring control
1323 * block. We set the 'ring disabled' bit in the
1324 * flags field until we're actually ready to start
1325 * using this ring (i.e. once we set the MTU
1326 * high enough to require it).
1327 */
1328 if (BNX_IS_JUMBO_CAPABLE(sc)) {
1329 rcb = &sc->bnx_ldata.bnx_info.bnx_jumbo_rx_rcb;
1330 /* Get the jumbo receive producer ring RCB parameters. */
1331 rcb->bge_hostaddr.bge_addr_lo =
1332 BGE_ADDR_LO(sc->bnx_ldata.bnx_rx_jumbo_ring_paddr);
1333 rcb->bge_hostaddr.bge_addr_hi =
1334 BGE_ADDR_HI(sc->bnx_ldata.bnx_rx_jumbo_ring_paddr);
1335 rcb->bge_maxlen_flags =
1336 BGE_RCB_MAXLEN_FLAGS(BNX_MAX_FRAMELEN,
1337 BGE_RCB_FLAG_RING_DISABLED);
303fdc72 1338 if (BNX_IS_5717_PLUS(sc))
6c8d8ecc
SZ
1339 rcb->bge_nicaddr = BGE_JUMBO_RX_RINGS_5717;
1340 else
1341 rcb->bge_nicaddr = BGE_JUMBO_RX_RINGS;
1342 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_HI,
1343 rcb->bge_hostaddr.bge_addr_hi);
1344 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_LO,
1345 rcb->bge_hostaddr.bge_addr_lo);
1346 /* Program the jumbo receive producer ring RCB parameters. */
1347 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_MAXLEN_FLAGS,
1348 rcb->bge_maxlen_flags);
1349 CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_NICADDR, rcb->bge_nicaddr);
1350 /* Reset the jumbo receive producer ring producer index. */
1351 bnx_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, 0);
1352 }
1353
1354 /* Choose de-pipeline mode for BCM5906 A0, A1 and A2. */
1355 if (sc->bnx_asicrev == BGE_ASICREV_BCM5906 &&
1356 (sc->bnx_chipid == BGE_CHIPID_BCM5906_A0 ||
1357 sc->bnx_chipid == BGE_CHIPID_BCM5906_A1 ||
1358 sc->bnx_chipid == BGE_CHIPID_BCM5906_A2)) {
1359 CSR_WRITE_4(sc, BGE_ISO_PKT_TX,
1360 (CSR_READ_4(sc, BGE_ISO_PKT_TX) & ~3) | 2);
1361 }
1362
1363 /*
1364 * The BD ring replenish thresholds control how often the
1365 * hardware fetches new BD's from the producer rings in host
1366 * memory. Setting the value too low on a busy system can
1367 * starve the hardware and recue the throughpout.
1368 *
1369 * Set the BD ring replentish thresholds. The recommended
1370 * values are 1/8th the number of descriptors allocated to
1371 * each ring.
1372 */
1373 val = 8;
1374 CSR_WRITE_4(sc, BGE_RBDI_STD_REPL_THRESH, val);
1375 if (BNX_IS_JUMBO_CAPABLE(sc)) {
1376 CSR_WRITE_4(sc, BGE_RBDI_JUMBO_REPL_THRESH,
1377 BGE_JUMBO_RX_RING_CNT/8);
1378 }
f368d0d9 1379 if (BNX_IS_57765_PLUS(sc)) {
6c8d8ecc
SZ
1380 CSR_WRITE_4(sc, BGE_STD_REPLENISH_LWM, 32);
1381 CSR_WRITE_4(sc, BGE_JMB_REPLENISH_LWM, 16);
1382 }
1383
1384 /*
1385 * Disable all send rings by setting the 'ring disabled' bit
1386 * in the flags field of all the TX send ring control blocks,
1387 * located in NIC memory.
1388 */
80969639
SZ
1389 if (BNX_IS_5717_PLUS(sc))
1390 limit = 4;
4f23029e
SZ
1391 else if (BNX_IS_57765_FAMILY(sc))
1392 limit = 2;
80969639
SZ
1393 else
1394 limit = 1;
6c8d8ecc
SZ
1395 vrcb = BGE_MEMWIN_START + BGE_SEND_RING_RCB;
1396 for (i = 0; i < limit; i++) {
1397 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags,
1398 BGE_RCB_MAXLEN_FLAGS(0, BGE_RCB_FLAG_RING_DISABLED));
1399 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0);
1400 vrcb += sizeof(struct bge_rcb);
1401 }
1402
1403 /* Configure send ring RCB 0 (we use only the first ring) */
1404 vrcb = BGE_MEMWIN_START + BGE_SEND_RING_RCB;
1405 BGE_HOSTADDR(taddr, sc->bnx_ldata.bnx_tx_ring_paddr);
1406 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi);
1407 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo);
303fdc72 1408 if (BNX_IS_5717_PLUS(sc)) {
6c8d8ecc
SZ
1409 RCB_WRITE_4(sc, vrcb, bge_nicaddr, BGE_SEND_RING_5717);
1410 } else {
1411 RCB_WRITE_4(sc, vrcb, bge_nicaddr,
1412 BGE_NIC_TXRING_ADDR(0, BGE_TX_RING_CNT));
1413 }
1414 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags,
1415 BGE_RCB_MAXLEN_FLAGS(BGE_TX_RING_CNT, 0));
1416
1417 /*
1418 * Disable all receive return rings by setting the
1419 * 'ring disabled' bit in the flags field of all the receive
1420 * return ring control blocks, located in NIC memory.
1421 */
80969639 1422 if (BNX_IS_5717_PLUS(sc)) {
6c8d8ecc
SZ
1423 /* Should be 17, use 16 until we get an SRAM map. */
1424 limit = 16;
4f23029e 1425 } else if (BNX_IS_57765_FAMILY(sc)) {
6c8d8ecc
SZ
1426 limit = 4;
1427 } else {
1428 limit = 1;
1429 }
1430 /* Disable all receive return rings. */
1431 vrcb = BGE_MEMWIN_START + BGE_RX_RETURN_RING_RCB;
1432 for (i = 0; i < limit; i++) {
1433 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, 0);
1434 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, 0);
1435 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags,
1436 BGE_RCB_FLAG_RING_DISABLED);
1437 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0);
1438 bnx_writembx(sc, BGE_MBX_RX_CONS0_LO +
1439 (i * (sizeof(uint64_t))), 0);
1440 vrcb += sizeof(struct bge_rcb);
1441 }
1442
1443 /*
1444 * Set up receive return ring 0. Note that the NIC address
1445 * for RX return rings is 0x0. The return rings live entirely
1446 * within the host, so the nicaddr field in the RCB isn't used.
1447 */
1448 vrcb = BGE_MEMWIN_START + BGE_RX_RETURN_RING_RCB;
1449 BGE_HOSTADDR(taddr, sc->bnx_ldata.bnx_rx_return_ring_paddr);
1450 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi);
1451 RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo);
1452 RCB_WRITE_4(sc, vrcb, bge_nicaddr, 0);
1453 RCB_WRITE_4(sc, vrcb, bge_maxlen_flags,
1454 BGE_RCB_MAXLEN_FLAGS(sc->bnx_return_ring_cnt, 0));
1455
1456 /* Set random backoff seed for TX */
1457 CSR_WRITE_4(sc, BGE_TX_RANDOM_BACKOFF,
1458 sc->arpcom.ac_enaddr[0] + sc->arpcom.ac_enaddr[1] +
1459 sc->arpcom.ac_enaddr[2] + sc->arpcom.ac_enaddr[3] +
1460 sc->arpcom.ac_enaddr[4] + sc->arpcom.ac_enaddr[5] +
1461 BGE_TX_BACKOFF_SEED_MASK);
1462
1463 /* Set inter-packet gap */
1464 val = 0x2620;
1465 if (sc->bnx_asicrev == BGE_ASICREV_BCM5720) {
1466 val |= CSR_READ_4(sc, BGE_TX_LENGTHS) &
1467 (BGE_TXLEN_JMB_FRM_LEN_MSK | BGE_TXLEN_CNT_DN_VAL_MSK);
1468 }
1469 CSR_WRITE_4(sc, BGE_TX_LENGTHS, val);
1470
1471 /*
1472 * Specify which ring to use for packets that don't match
1473 * any RX rules.
1474 */
1475 CSR_WRITE_4(sc, BGE_RX_RULES_CFG, 0x08);
1476
1477 /*
1478 * Configure number of RX lists. One interrupt distribution
1479 * list, sixteen active lists, one bad frames class.
1480 */
1481 CSR_WRITE_4(sc, BGE_RXLP_CFG, 0x181);
1482
1483 /* Inialize RX list placement stats mask. */
1484 CSR_WRITE_4(sc, BGE_RXLP_STATS_ENABLE_MASK, 0x007FFFFF);
1485 CSR_WRITE_4(sc, BGE_RXLP_STATS_CTL, 0x1);
1486
1487 /* Disable host coalescing until we get it set up */
1488 CSR_WRITE_4(sc, BGE_HCC_MODE, 0x00000000);
1489
1490 /* Poll to make sure it's shut down. */
1491 for (i = 0; i < BNX_TIMEOUT; i++) {
1492 if (!(CSR_READ_4(sc, BGE_HCC_MODE) & BGE_HCCMODE_ENABLE))
1493 break;
1494 DELAY(10);
1495 }
1496
1497 if (i == BNX_TIMEOUT) {
1498 if_printf(&sc->arpcom.ac_if,
1499 "host coalescing engine failed to idle\n");
1500 return(ENXIO);
1501 }
1502
1503 /* Set up host coalescing defaults */
1504 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS, sc->bnx_rx_coal_ticks);
1505 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS, sc->bnx_tx_coal_ticks);
1506 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS, sc->bnx_rx_coal_bds);
1507 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS, sc->bnx_tx_coal_bds);
1508 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS_INT, sc->bnx_rx_coal_bds_int);
1509 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS_INT, sc->bnx_tx_coal_bds_int);
1510
1511 /* Set up address of status block */
1512 bzero(sc->bnx_ldata.bnx_status_block, BGE_STATUS_BLK_SZ);
1513 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_HI,
1514 BGE_ADDR_HI(sc->bnx_ldata.bnx_status_block_paddr));
1515 CSR_WRITE_4(sc, BGE_HCC_STATUSBLK_ADDR_LO,
1516 BGE_ADDR_LO(sc->bnx_ldata.bnx_status_block_paddr));
1517
1518 /* Set up status block partail update size. */
1519 val = BGE_STATBLKSZ_32BYTE;
1520#if 0
1521 /*
1522 * Does not seem to have visible effect in both
1523 * bulk data (1472B UDP datagram) and tiny data
1524 * (18B UDP datagram) TX tests.
1525 */
1526 val |= BGE_HCCMODE_CLRTICK_TX;
1527#endif
1528 /* Turn on host coalescing state machine */
1529 CSR_WRITE_4(sc, BGE_HCC_MODE, val | BGE_HCCMODE_ENABLE);
1530
1531 /* Turn on RX BD completion state machine and enable attentions */
1532 CSR_WRITE_4(sc, BGE_RBDC_MODE,
1533 BGE_RBDCMODE_ENABLE|BGE_RBDCMODE_ATTN);
1534
1535 /* Turn on RX list placement state machine */
1536 CSR_WRITE_4(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE);
1537
1538 val = BGE_MACMODE_TXDMA_ENB | BGE_MACMODE_RXDMA_ENB |
1539 BGE_MACMODE_RX_STATS_CLEAR | BGE_MACMODE_TX_STATS_CLEAR |
1540 BGE_MACMODE_RX_STATS_ENB | BGE_MACMODE_TX_STATS_ENB |
1541 BGE_MACMODE_FRMHDR_DMA_ENB;
1542
1543 if (sc->bnx_flags & BNX_FLAG_TBI)
1544 val |= BGE_PORTMODE_TBI;
1545 else if (sc->bnx_flags & BNX_FLAG_MII_SERDES)
1546 val |= BGE_PORTMODE_GMII;
1547 else
1548 val |= BGE_PORTMODE_MII;
1549
1550 /* Turn on DMA, clear stats */
1551 CSR_WRITE_4(sc, BGE_MAC_MODE, val);
1552
1553 /* Set misc. local control, enable interrupts on attentions */
1554 CSR_WRITE_4(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_ONATTN);
1555
1556#ifdef notdef
1557 /* Assert GPIO pins for PHY reset */
1558 BNX_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUT0|
1559 BGE_MLC_MISCIO_OUT1|BGE_MLC_MISCIO_OUT2);
1560 BNX_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_MISCIO_OUTEN0|
1561 BGE_MLC_MISCIO_OUTEN1|BGE_MLC_MISCIO_OUTEN2);
1562#endif
1563
1564 /* Turn on write DMA state machine */
1565 val = BGE_WDMAMODE_ENABLE|BGE_WDMAMODE_ALL_ATTNS;
1566 /* Enable host coalescing bug fix. */
1567 val |= BGE_WDMAMODE_STATUS_TAG_FIX;
1568 if (sc->bnx_asicrev == BGE_ASICREV_BCM5785) {
1569 /* Request larger DMA burst size to get better performance. */
1570 val |= BGE_WDMAMODE_BURST_ALL_DATA;
1571 }
1572 CSR_WRITE_4(sc, BGE_WDMA_MODE, val);
1573 DELAY(40);
1574
3730a14d 1575 if (BNX_IS_57765_PLUS(sc)) {
6c8d8ecc
SZ
1576 uint32_t dmactl;
1577
1578 dmactl = CSR_READ_4(sc, BGE_RDMA_RSRVCTRL);
1579 /*
1580 * Adjust tx margin to prevent TX data corruption and
1581 * fix internal FIFO overflow.
1582 */
1583 if (sc->bnx_asicrev == BGE_ASICREV_BCM5719 ||
1584 sc->bnx_asicrev == BGE_ASICREV_BCM5720) {
1585 dmactl &= ~(BGE_RDMA_RSRVCTRL_FIFO_LWM_MASK |
1586 BGE_RDMA_RSRVCTRL_FIFO_HWM_MASK |
1587 BGE_RDMA_RSRVCTRL_TXMRGN_MASK);
1588 dmactl |= BGE_RDMA_RSRVCTRL_FIFO_LWM_1_5K |
1589 BGE_RDMA_RSRVCTRL_FIFO_HWM_1_5K |
1590 BGE_RDMA_RSRVCTRL_TXMRGN_320B;
1591 }
1592 /*
1593 * Enable fix for read DMA FIFO overruns.
1594 * The fix is to limit the number of RX BDs
1595 * the hardware would fetch at a fime.
1596 */
1597 CSR_WRITE_4(sc, BGE_RDMA_RSRVCTRL,
1598 dmactl | BGE_RDMA_RSRVCTRL_FIFO_OFLW_FIX);
1599 }
1600
1601 if (sc->bnx_asicrev == BGE_ASICREV_BCM5719) {
1602 CSR_WRITE_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL,
1603 CSR_READ_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL) |
1604 BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_BD_4K |
1605 BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_LSO_4K);
1606 } else if (sc->bnx_asicrev == BGE_ASICREV_BCM5720) {
1607 /*
1608 * Allow 4KB burst length reads for non-LSO frames.
1609 * Enable 512B burst length reads for buffer descriptors.
1610 */
1611 CSR_WRITE_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL,
1612 CSR_READ_4(sc, BGE_RDMA_LSO_CRPTEN_CTRL) |
1613 BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_BD_512 |
1614 BGE_RDMA_LSO_CRPTEN_CTRL_BLEN_LSO_4K);
1615 }
1616
1617 /* Turn on read DMA state machine */
1618 val = BGE_RDMAMODE_ENABLE | BGE_RDMAMODE_ALL_ATTNS;
1619 if (sc->bnx_asicrev == BGE_ASICREV_BCM5717)
1620 val |= BGE_RDMAMODE_MULT_DMA_RD_DIS;
1621 if (sc->bnx_asicrev == BGE_ASICREV_BCM5784 ||
1622 sc->bnx_asicrev == BGE_ASICREV_BCM5785 ||
1623 sc->bnx_asicrev == BGE_ASICREV_BCM57780) {
1624 val |= BGE_RDMAMODE_BD_SBD_CRPT_ATTN |
1625 BGE_RDMAMODE_MBUF_RBD_CRPT_ATTN |
1626 BGE_RDMAMODE_MBUF_SBD_CRPT_ATTN;
1627 }
1628 if (sc->bnx_asicrev == BGE_ASICREV_BCM5720) {
1629 val |= CSR_READ_4(sc, BGE_RDMA_MODE) &
1630 BGE_RDMAMODE_H2BNC_VLAN_DET;
1631 /*
1632 * Allow multiple outstanding read requests from
1633 * non-LSO read DMA engine.
1634 */
1635 val &= ~BGE_RDMAMODE_MULT_DMA_RD_DIS;
1636 }
66deb1c1
SZ
1637 if (sc->bnx_flags & BNX_FLAG_TSO)
1638 val |= BGE_RDMAMODE_TSO4_ENABLE;
6c8d8ecc
SZ
1639 val |= BGE_RDMAMODE_FIFO_LONG_BURST;
1640 CSR_WRITE_4(sc, BGE_RDMA_MODE, val);
1641 DELAY(40);
1642
1643 /* Turn on RX data completion state machine */
1644 CSR_WRITE_4(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE);
1645
1646 /* Turn on RX BD initiator state machine */
1647 CSR_WRITE_4(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE);
1648
1649 /* Turn on RX data and RX BD initiator state machine */
1650 CSR_WRITE_4(sc, BGE_RDBDI_MODE, BGE_RDBDIMODE_ENABLE);
1651
1652 /* Turn on send BD completion state machine */
1653 CSR_WRITE_4(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE);
1654
1655 /* Turn on send data completion state machine */
1656 val = BGE_SDCMODE_ENABLE;
1657 if (sc->bnx_asicrev == BGE_ASICREV_BCM5761)
1658 val |= BGE_SDCMODE_CDELAY;
1659 CSR_WRITE_4(sc, BGE_SDC_MODE, val);
1660
1661 /* Turn on send data initiator state machine */
66deb1c1
SZ
1662 if (sc->bnx_flags & BNX_FLAG_TSO) {
1663 CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE |
1664 BGE_SDIMODE_HW_LSO_PRE_DMA);
1665 } else {
1666 CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE);
1667 }
6c8d8ecc
SZ
1668
1669 /* Turn on send BD initiator state machine */
1670 CSR_WRITE_4(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE);
1671
1672 /* Turn on send BD selector state machine */
1673 CSR_WRITE_4(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE);
1674
1675 CSR_WRITE_4(sc, BGE_SDI_STATS_ENABLE_MASK, 0x007FFFFF);
1676 CSR_WRITE_4(sc, BGE_SDI_STATS_CTL,
1677 BGE_SDISTATSCTL_ENABLE|BGE_SDISTATSCTL_FASTER);
1678
1679 /* ack/clear link change events */
1680 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED|
1681 BGE_MACSTAT_CFG_CHANGED|BGE_MACSTAT_MI_COMPLETE|
1682 BGE_MACSTAT_LINK_CHANGED);
1683 CSR_WRITE_4(sc, BGE_MI_STS, 0);
1684
1685 /*
1686 * Enable attention when the link has changed state for
1687 * devices that use auto polling.
1688 */
1689 if (sc->bnx_flags & BNX_FLAG_TBI) {
1690 CSR_WRITE_4(sc, BGE_MI_STS, BGE_MISTS_LINK);
1691 } else {
1692 if (sc->bnx_mi_mode & BGE_MIMODE_AUTOPOLL) {
1693 CSR_WRITE_4(sc, BGE_MI_MODE, sc->bnx_mi_mode);
1694 DELAY(80);
1695 }
1696 }
1697
1698 /*
1699 * Clear any pending link state attention.
1700 * Otherwise some link state change events may be lost until attention
1701 * is cleared by bnx_intr() -> bnx_softc.bnx_link_upd() sequence.
1702 * It's not necessary on newer BCM chips - perhaps enabling link
1703 * state change attentions implies clearing pending attention.
1704 */
1705 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED|
1706 BGE_MACSTAT_CFG_CHANGED|BGE_MACSTAT_MI_COMPLETE|
1707 BGE_MACSTAT_LINK_CHANGED);
1708
1709 /* Enable link state change attentions. */
1710 BNX_SETBIT(sc, BGE_MAC_EVT_ENB, BGE_EVTENB_LINK_CHANGED);
1711
1712 return(0);
1713}
1714
1715/*
1716 * Probe for a Broadcom chip. Check the PCI vendor and device IDs
1717 * against our list and return its name if we find a match. Note
1718 * that since the Broadcom controller contains VPD support, we
1719 * can get the device name string from the controller itself instead
1720 * of the compiled-in string. This is a little slow, but it guarantees
1721 * we'll always announce the right product name.
1722 */
1723static int
1724bnx_probe(device_t dev)
1725{
1726 const struct bnx_type *t;
1727 uint16_t product, vendor;
1728
1729 if (!pci_is_pcie(dev))
1730 return ENXIO;
1731
1732 product = pci_get_device(dev);
1733 vendor = pci_get_vendor(dev);
1734
1735 for (t = bnx_devs; t->bnx_name != NULL; t++) {
1736 if (vendor == t->bnx_vid && product == t->bnx_did)
1737 break;
1738 }
1739 if (t->bnx_name == NULL)
1740 return ENXIO;
1741
1742 device_set_desc(dev, t->bnx_name);
1743 return 0;
1744}
1745
1746static int
1747bnx_attach(device_t dev)
1748{
1749 struct ifnet *ifp;
1750 struct bnx_softc *sc;
1751 uint32_t hwcfg = 0, misccfg;
1752 int error = 0, rid, capmask;
1753 uint8_t ether_addr[ETHER_ADDR_LEN];
1754 uint16_t product, vendor;
1755 driver_intr_t *intr_func;
1756 uintptr_t mii_priv = 0;
1757 u_int intr_flags;
66deb1c1
SZ
1758#ifdef BNX_TSO_DEBUG
1759 char desc[32];
1760 int i;
1761#endif
6c8d8ecc
SZ
1762
1763 sc = device_get_softc(dev);
1764 sc->bnx_dev = dev;
50668ed5 1765 callout_init_mp(&sc->bnx_stat_timer);
df9ccc98 1766 callout_init_mp(&sc->bnx_intr_timer);
6c8d8ecc
SZ
1767 lwkt_serialize_init(&sc->bnx_jslot_serializer);
1768
1769 product = pci_get_device(dev);
1770 vendor = pci_get_vendor(dev);
1771
1772#ifndef BURN_BRIDGES
1773 if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
1774 uint32_t irq, mem;
1775
1776 irq = pci_read_config(dev, PCIR_INTLINE, 4);
1777 mem = pci_read_config(dev, BGE_PCI_BAR0, 4);
1778
1779 device_printf(dev, "chip is in D%d power mode "
1780 "-- setting to D0\n", pci_get_powerstate(dev));
1781
1782 pci_set_powerstate(dev, PCI_POWERSTATE_D0);
1783
1784 pci_write_config(dev, PCIR_INTLINE, irq, 4);
1785 pci_write_config(dev, BGE_PCI_BAR0, mem, 4);
1786 }
1787#endif /* !BURN_BRIDGE */
1788
1789 /*
1790 * Map control/status registers.
1791 */
1792 pci_enable_busmaster(dev);
1793
1794 rid = BGE_PCI_BAR0;
1795 sc->bnx_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
1796 RF_ACTIVE);
1797
1798 if (sc->bnx_res == NULL) {
1799 device_printf(dev, "couldn't map memory\n");
1800 return ENXIO;
1801 }
1802
1803 sc->bnx_btag = rman_get_bustag(sc->bnx_res);
1804 sc->bnx_bhandle = rman_get_bushandle(sc->bnx_res);
1805
1806 /* Save various chip information */
1807 sc->bnx_chipid =
1808 pci_read_config(dev, BGE_PCI_MISC_CTL, 4) >>
1809 BGE_PCIMISCCTL_ASICREV_SHIFT;
1810 if (BGE_ASICREV(sc->bnx_chipid) == BGE_ASICREV_USE_PRODID_REG) {
1811 /* All chips having dedicated ASICREV register have CPMU */
1812 sc->bnx_flags |= BNX_FLAG_CPMU;
1813
1814 switch (product) {
1815 case PCI_PRODUCT_BROADCOM_BCM5717:
1816 case PCI_PRODUCT_BROADCOM_BCM5718:
1817 case PCI_PRODUCT_BROADCOM_BCM5719:
1818 case PCI_PRODUCT_BROADCOM_BCM5720_ALT:
1819 sc->bnx_chipid = pci_read_config(dev,
1820 BGE_PCI_GEN2_PRODID_ASICREV, 4);
1821 break;
1822
1823 case PCI_PRODUCT_BROADCOM_BCM57761:
32ff3c80 1824 case PCI_PRODUCT_BROADCOM_BCM57762:
6c8d8ecc 1825 case PCI_PRODUCT_BROADCOM_BCM57765:
32ff3c80 1826 case PCI_PRODUCT_BROADCOM_BCM57766:
6c8d8ecc 1827 case PCI_PRODUCT_BROADCOM_BCM57781:
32ff3c80 1828 case PCI_PRODUCT_BROADCOM_BCM57782:
6c8d8ecc 1829 case PCI_PRODUCT_BROADCOM_BCM57785:
32ff3c80 1830 case PCI_PRODUCT_BROADCOM_BCM57786:
6c8d8ecc
SZ
1831 case PCI_PRODUCT_BROADCOM_BCM57791:
1832 case PCI_PRODUCT_BROADCOM_BCM57795:
1833 sc->bnx_chipid = pci_read_config(dev,
1834 BGE_PCI_GEN15_PRODID_ASICREV, 4);
1835 break;
1836
1837 default:
1838 sc->bnx_chipid = pci_read_config(dev,
1839 BGE_PCI_PRODID_ASICREV, 4);
1840 break;
1841 }
1842 }
1843 sc->bnx_asicrev = BGE_ASICREV(sc->bnx_chipid);
1844 sc->bnx_chiprev = BGE_CHIPREV(sc->bnx_chipid);
1845
1846 switch (sc->bnx_asicrev) {
1847 case BGE_ASICREV_BCM5717:
1848 case BGE_ASICREV_BCM5719:
1849 case BGE_ASICREV_BCM5720:
f368d0d9
SZ
1850 sc->bnx_flags |= BNX_FLAG_5717_PLUS | BNX_FLAG_57765_PLUS;
1851 break;
1852
6c8d8ecc 1853 case BGE_ASICREV_BCM57765:
32ff3c80 1854 case BGE_ASICREV_BCM57766:
f368d0d9 1855 sc->bnx_flags |= BNX_FLAG_57765_FAMILY | BNX_FLAG_57765_PLUS;
6c8d8ecc
SZ
1856 break;
1857 }
1858 sc->bnx_flags |= BNX_FLAG_SHORTDMA;
1859
66deb1c1
SZ
1860 sc->bnx_flags |= BNX_FLAG_TSO;
1861 if (sc->bnx_asicrev == BGE_ASICREV_BCM5719 &&
1862 sc->bnx_chipid == BGE_CHIPID_BCM5719_A0)
1863 sc->bnx_flags &= ~BNX_FLAG_TSO;
1864
df9ccc98
SZ
1865 if (sc->bnx_asicrev == BGE_ASICREV_BCM5717 ||
1866 BNX_IS_57765_FAMILY(sc)) {
1867 /*
1868 * All BCM57785 and BCM5718 families chips have a bug that
1869 * under certain situation interrupt will not be enabled
1870 * even if status tag is written to BGE_MBX_IRQ0_LO mailbox.
1871 *
1872 * While BCM5719 and BCM5720 have a hardware workaround
1873 * which could fix the above bug.
1874 * See the comment near BGE_PCIDMARWCTL_TAGGED_STATUS_WA in
1875 * bnx_chipinit().
1876 *
1877 * For the rest of the chips in these two families, we will
1878 * have to poll the status block at high rate (10ms currently)
1879 * to check whether the interrupt is hosed or not.
1880 * See bnx_intr_check() for details.
1881 */
1882 sc->bnx_flags |= BNX_FLAG_STATUSTAG_BUG;
1883 }
1884
6c8d8ecc
SZ
1885 misccfg = CSR_READ_4(sc, BGE_MISC_CFG) & BGE_MISCCFG_BOARD_ID_MASK;
1886
1887 sc->bnx_pciecap = pci_get_pciecap_ptr(sc->bnx_dev);
1888 if (sc->bnx_asicrev == BGE_ASICREV_BCM5719 ||
1889 sc->bnx_asicrev == BGE_ASICREV_BCM5720)
1890 pcie_set_max_readrq(dev, PCIEM_DEVCTL_MAX_READRQ_2048);
1891 else
1892 pcie_set_max_readrq(dev, PCIEM_DEVCTL_MAX_READRQ_4096);
1893 device_printf(dev, "CHIP ID 0x%08x; "
1894 "ASIC REV 0x%02x; CHIP REV 0x%02x\n",
1895 sc->bnx_chipid, sc->bnx_asicrev, sc->bnx_chiprev);
1896
1897 /*
1898 * Set various PHY quirk flags.
1899 */
1900
1901 capmask = MII_CAPMASK_DEFAULT;
46283a40
SZ
1902 if (product == PCI_PRODUCT_BROADCOM_BCM57791 ||
1903 product == PCI_PRODUCT_BROADCOM_BCM57795) {
6c8d8ecc
SZ
1904 /* 10/100 only */
1905 capmask &= ~BMSR_EXTSTAT;
1906 }
1907
1908 mii_priv |= BRGPHY_FLAG_WIRESPEED;
1909
6c8d8ecc
SZ
1910 /*
1911 * Allocate interrupt
1912 */
1913 sc->bnx_irq_type = pci_alloc_1intr(dev, bnx_msi_enable, &sc->bnx_irq_rid,
1914 &intr_flags);
1915
1916 sc->bnx_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->bnx_irq_rid,
1917 intr_flags);
1918 if (sc->bnx_irq == NULL) {
1919 device_printf(dev, "couldn't map interrupt\n");
1920 error = ENXIO;
1921 goto fail;
1922 }
1923
1924 if (sc->bnx_irq_type == PCI_INTR_TYPE_MSI) {
1925 sc->bnx_flags |= BNX_FLAG_ONESHOT_MSI;
1926 bnx_enable_msi(sc);
1927 }
1928
1929 /* Initialize if_name earlier, so if_printf could be used */
1930 ifp = &sc->arpcom.ac_if;
1931 if_initname(ifp, device_get_name(dev), device_get_unit(dev));
1932
1933 /* Try to reset the chip. */
1934 bnx_reset(sc);
1935
1936 if (bnx_chipinit(sc)) {
1937 device_printf(dev, "chip initialization failed\n");
1938 error = ENXIO;
1939 goto fail;
1940 }
1941
1942 /*
1943 * Get station address
1944 */
1945 error = bnx_get_eaddr(sc, ether_addr);
1946 if (error) {
1947 device_printf(dev, "failed to read station address\n");
1948 goto fail;
1949 }
1950
f368d0d9 1951 if (BNX_IS_57765_PLUS(sc)) {
6c8d8ecc
SZ
1952 sc->bnx_return_ring_cnt = BGE_RETURN_RING_CNT;
1953 } else {
1954 /* 5705/5750 limits RX return ring to 512 entries. */
1955 sc->bnx_return_ring_cnt = BGE_RETURN_RING_CNT_5705;
1956 }
1957
1958 error = bnx_dma_alloc(sc);
1959 if (error)
1960 goto fail;
1961
1962 /* Set default tuneable values. */
1963 sc->bnx_rx_coal_ticks = BNX_RX_COAL_TICKS_DEF;
1964 sc->bnx_tx_coal_ticks = BNX_TX_COAL_TICKS_DEF;
1965 sc->bnx_rx_coal_bds = BNX_RX_COAL_BDS_DEF;
1966 sc->bnx_tx_coal_bds = BNX_TX_COAL_BDS_DEF;
306e5498
SZ
1967 sc->bnx_rx_coal_bds_int = BNX_RX_COAL_BDS_INT_DEF;
1968 sc->bnx_tx_coal_bds_int = BNX_TX_COAL_BDS_INT_DEF;
6c8d8ecc
SZ
1969
1970 /* Set up ifnet structure */
1971 ifp->if_softc = sc;
1972 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
1973 ifp->if_ioctl = bnx_ioctl;
1974 ifp->if_start = bnx_start;
1975#ifdef DEVICE_POLLING
1976 ifp->if_poll = bnx_poll;
1977#endif
1978 ifp->if_watchdog = bnx_watchdog;
1979 ifp->if_init = bnx_init;
1980 ifp->if_mtu = ETHERMTU;
1981 ifp->if_capabilities = IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_MTU;
1982 ifq_set_maxlen(&ifp->if_snd, BGE_TX_RING_CNT - 1);
1983 ifq_set_ready(&ifp->if_snd);
1984
1985 ifp->if_capabilities |= IFCAP_HWCSUM;
1986 ifp->if_hwassist = BNX_CSUM_FEATURES;
66deb1c1
SZ
1987 if (sc->bnx_flags & BNX_FLAG_TSO) {
1988 ifp->if_capabilities |= IFCAP_TSO;
1989 ifp->if_hwassist |= CSUM_TSO;
1990 }
6c8d8ecc
SZ
1991 ifp->if_capenable = ifp->if_capabilities;
1992
1993 /*
1994 * Figure out what sort of media we have by checking the
1995 * hardware config word in the first 32k of NIC internal memory,
1996 * or fall back to examining the EEPROM if necessary.
1997 * Note: on some BCM5700 cards, this value appears to be unset.
1998 * If that's the case, we have to rely on identifying the NIC
1999 * by its PCI subsystem ID, as we do below for the SysKonnect
2000 * SK-9D41.
2001 */
2002 if (bnx_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_SIG) == BGE_MAGIC_NUMBER) {
2003 hwcfg = bnx_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_NICCFG);
2004 } else {
2005 if (bnx_read_eeprom(sc, (caddr_t)&hwcfg, BGE_EE_HWCFG_OFFSET,
2006 sizeof(hwcfg))) {
2007 device_printf(dev, "failed to read EEPROM\n");
2008 error = ENXIO;
2009 goto fail;
2010 }
2011 hwcfg = ntohl(hwcfg);
2012 }
2013
2014 /* The SysKonnect SK-9D41 is a 1000baseSX card. */
2015 if (pci_get_subvendor(dev) == PCI_PRODUCT_SCHNEIDERKOCH_SK_9D41 ||
2016 (hwcfg & BGE_HWCFG_MEDIA) == BGE_MEDIA_FIBER)
2017 sc->bnx_flags |= BNX_FLAG_TBI;
2018
2019 /* Setup MI MODE */
2020 if (sc->bnx_flags & BNX_FLAG_CPMU)
2021 sc->bnx_mi_mode = BGE_MIMODE_500KHZ_CONST;
2022 else
2023 sc->bnx_mi_mode = BGE_MIMODE_BASE;
2024
2025 /* Setup link status update stuffs */
2026 if (sc->bnx_flags & BNX_FLAG_TBI) {
2027 sc->bnx_link_upd = bnx_tbi_link_upd;
2028 sc->bnx_link_chg = BGE_MACSTAT_LINK_CHANGED;
2029 } else if (sc->bnx_mi_mode & BGE_MIMODE_AUTOPOLL) {
2030 sc->bnx_link_upd = bnx_autopoll_link_upd;
2031 sc->bnx_link_chg = BGE_MACSTAT_LINK_CHANGED;
2032 } else {
2033 sc->bnx_link_upd = bnx_copper_link_upd;
2034 sc->bnx_link_chg = BGE_MACSTAT_LINK_CHANGED;
2035 }
2036
2037 /* Set default PHY address */
2038 sc->bnx_phyno = 1;
2039
2040 /*
2041 * PHY address mapping for various devices.
2042 *
2043 * | F0 Cu | F0 Sr | F1 Cu | F1 Sr |
2044 * ---------+-------+-------+-------+-------+
2045 * BCM57XX | 1 | X | X | X |
2046 * BCM5704 | 1 | X | 1 | X |
2047 * BCM5717 | 1 | 8 | 2 | 9 |
2048 * BCM5719 | 1 | 8 | 2 | 9 |
2049 * BCM5720 | 1 | 8 | 2 | 9 |
2050 *
2051 * Other addresses may respond but they are not
2052 * IEEE compliant PHYs and should be ignored.
2053 */
80969639 2054 if (BNX_IS_5717_PLUS(sc)) {
6c8d8ecc
SZ
2055 int f;
2056
2057 f = pci_get_function(dev);
2058 if (sc->bnx_chipid == BGE_CHIPID_BCM5717_A0) {
2059 if (CSR_READ_4(sc, BGE_SGDIG_STS) &
2060 BGE_SGDIGSTS_IS_SERDES)
2061 sc->bnx_phyno = f + 8;
2062 else
2063 sc->bnx_phyno = f + 1;
2064 } else {
2065 if (CSR_READ_4(sc, BGE_CPMU_PHY_STRAP) &
2066 BGE_CPMU_PHY_STRAP_IS_SERDES)
2067 sc->bnx_phyno = f + 8;
2068 else
2069 sc->bnx_phyno = f + 1;
2070 }
2071 }
2072
2073 if (sc->bnx_flags & BNX_FLAG_TBI) {
2074 ifmedia_init(&sc->bnx_ifmedia, IFM_IMASK,
2075 bnx_ifmedia_upd, bnx_ifmedia_sts);
2076 ifmedia_add(&sc->bnx_ifmedia, IFM_ETHER|IFM_1000_SX, 0, NULL);
2077 ifmedia_add(&sc->bnx_ifmedia,
2078 IFM_ETHER|IFM_1000_SX|IFM_FDX, 0, NULL);
2079 ifmedia_add(&sc->bnx_ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL);
2080 ifmedia_set(&sc->bnx_ifmedia, IFM_ETHER|IFM_AUTO);
2081 sc->bnx_ifmedia.ifm_media = sc->bnx_ifmedia.ifm_cur->ifm_media;
2082 } else {
2083 struct mii_probe_args mii_args;
2084
2085 mii_probe_args_init(&mii_args, bnx_ifmedia_upd, bnx_ifmedia_sts);
2086 mii_args.mii_probemask = 1 << sc->bnx_phyno;
2087 mii_args.mii_capmask = capmask;
2088 mii_args.mii_privtag = MII_PRIVTAG_BRGPHY;
2089 mii_args.mii_priv = mii_priv;
2090
2091 error = mii_probe(dev, &sc->bnx_miibus, &mii_args);
2092 if (error) {
2093 device_printf(dev, "MII without any PHY!\n");
2094 goto fail;
2095 }
2096 }
2097
2098 /*
2099 * Create sysctl nodes.
2100 */
2101 sysctl_ctx_init(&sc->bnx_sysctl_ctx);
2102 sc->bnx_sysctl_tree = SYSCTL_ADD_NODE(&sc->bnx_sysctl_ctx,
2103 SYSCTL_STATIC_CHILDREN(_hw),
2104 OID_AUTO,
2105 device_get_nameunit(dev),
2106 CTLFLAG_RD, 0, "");
2107 if (sc->bnx_sysctl_tree == NULL) {
2108 device_printf(dev, "can't add sysctl node\n");
2109 error = ENXIO;
2110 goto fail;
2111 }
2112
2113 SYSCTL_ADD_PROC(&sc->bnx_sysctl_ctx,
2114 SYSCTL_CHILDREN(sc->bnx_sysctl_tree),
2115 OID_AUTO, "rx_coal_ticks",
2116 CTLTYPE_INT | CTLFLAG_RW,
2117 sc, 0, bnx_sysctl_rx_coal_ticks, "I",
2118 "Receive coalescing ticks (usec).");
2119 SYSCTL_ADD_PROC(&sc->bnx_sysctl_ctx,
2120 SYSCTL_CHILDREN(sc->bnx_sysctl_tree),
2121 OID_AUTO, "tx_coal_ticks",
2122 CTLTYPE_INT | CTLFLAG_RW,
2123 sc, 0, bnx_sysctl_tx_coal_ticks, "I",
2124 "Transmit coalescing ticks (usec).");
2125 SYSCTL_ADD_PROC(&sc->bnx_sysctl_ctx,
2126 SYSCTL_CHILDREN(sc->bnx_sysctl_tree),
2127 OID_AUTO, "rx_coal_bds",
2128 CTLTYPE_INT | CTLFLAG_RW,
2129 sc, 0, bnx_sysctl_rx_coal_bds, "I",
2130 "Receive max coalesced BD count.");
2131 SYSCTL_ADD_PROC(&sc->bnx_sysctl_ctx,
2132 SYSCTL_CHILDREN(sc->bnx_sysctl_tree),
2133 OID_AUTO, "tx_coal_bds",
2134 CTLTYPE_INT | CTLFLAG_RW,
2135 sc, 0, bnx_sysctl_tx_coal_bds, "I",
2136 "Transmit max coalesced BD count.");
2137 /*
2138 * A common design characteristic for many Broadcom
2139 * client controllers is that they only support a
2140 * single outstanding DMA read operation on the PCIe
2141 * bus. This means that it will take twice as long to
2142 * fetch a TX frame that is split into header and
2143 * payload buffers as it does to fetch a single,
2144 * contiguous TX frame (2 reads vs. 1 read). For these
2145 * controllers, coalescing buffers to reduce the number
2146 * of memory reads is effective way to get maximum
2147 * performance(about 940Mbps). Without collapsing TX
2148 * buffers the maximum TCP bulk transfer performance
2149 * is about 850Mbps. However forcing coalescing mbufs
2150 * consumes a lot of CPU cycles, so leave it off by
2151 * default.
2152 */
2153 SYSCTL_ADD_INT(&sc->bnx_sysctl_ctx,
2154 SYSCTL_CHILDREN(sc->bnx_sysctl_tree), OID_AUTO,
2155 "force_defrag", CTLFLAG_RW, &sc->bnx_force_defrag, 0,
2156 "Force defragment on TX path");
2157
2158 SYSCTL_ADD_PROC(&sc->bnx_sysctl_ctx,
2159 SYSCTL_CHILDREN(sc->bnx_sysctl_tree), OID_AUTO,
2160 "rx_coal_bds_int", CTLTYPE_INT | CTLFLAG_RW,
2161 sc, 0, bnx_sysctl_rx_coal_bds_int, "I",
2162 "Receive max coalesced BD count during interrupt.");
2163 SYSCTL_ADD_PROC(&sc->bnx_sysctl_ctx,
2164 SYSCTL_CHILDREN(sc->bnx_sysctl_tree), OID_AUTO,
2165 "tx_coal_bds_int", CTLTYPE_INT | CTLFLAG_RW,
2166 sc, 0, bnx_sysctl_tx_coal_bds_int, "I",
2167 "Transmit max coalesced BD count during interrupt.");
2168
66deb1c1
SZ
2169#ifdef BNX_TSO_DEBUG
2170 for (i = 0; i < BNX_TSO_NSTATS; ++i) {
2171 ksnprintf(desc, sizeof(desc), "tso%d", i + 1);
2172 SYSCTL_ADD_ULONG(&sc->bnx_sysctl_ctx,
2173 SYSCTL_CHILDREN(sc->bnx_sysctl_tree), OID_AUTO,
2174 desc, CTLFLAG_RW, &sc->bnx_tsosegs[i], "");
2175 }
2176#endif
2177
6c8d8ecc
SZ
2178 /*
2179 * Call MI attach routine.
2180 */
2181 ether_ifattach(ifp, ether_addr, NULL);
2182
2183 if (sc->bnx_irq_type == PCI_INTR_TYPE_MSI) {
2184 if (sc->bnx_flags & BNX_FLAG_ONESHOT_MSI) {
2185 intr_func = bnx_msi_oneshot;
2186 if (bootverbose)
2187 device_printf(dev, "oneshot MSI\n");
2188 } else {
2189 intr_func = bnx_msi;
2190 }
2191 } else {
2192 intr_func = bnx_intr_legacy;
2193 }
2194 error = bus_setup_intr(dev, sc->bnx_irq, INTR_MPSAFE, intr_func, sc,
2195 &sc->bnx_intrhand, ifp->if_serializer);
2196 if (error) {
2197 ether_ifdetach(ifp);
2198 device_printf(dev, "couldn't set up irq\n");
2199 goto fail;
2200 }
2201
2202 ifp->if_cpuid = rman_get_cpuid(sc->bnx_irq);
2203 KKASSERT(ifp->if_cpuid >= 0 && ifp->if_cpuid < ncpus);
2204
8ca0f604 2205 sc->bnx_stat_cpuid = ifp->if_cpuid;
df9ccc98 2206 sc->bnx_intr_cpuid = ifp->if_cpuid;
8ca0f604 2207
6c8d8ecc
SZ
2208 return(0);
2209fail:
2210 bnx_detach(dev);
2211 return(error);
2212}
2213
2214static int
2215bnx_detach(device_t dev)
2216{
2217 struct bnx_softc *sc = device_get_softc(dev);
2218
2219 if (device_is_attached(dev)) {
2220 struct ifnet *ifp = &sc->arpcom.ac_if;
2221
2222 lwkt_serialize_enter(ifp->if_serializer);
2223 bnx_stop(sc);
2224 bnx_reset(sc);
2225 bus_teardown_intr(dev, sc->bnx_irq, sc->bnx_intrhand);
2226 lwkt_serialize_exit(ifp->if_serializer);
2227
2228 ether_ifdetach(ifp);
2229 }
2230
2231 if (sc->bnx_flags & BNX_FLAG_TBI)
2232 ifmedia_removeall(&sc->bnx_ifmedia);
2233 if (sc->bnx_miibus)
2234 device_delete_child(dev, sc->bnx_miibus);
2235 bus_generic_detach(dev);
2236
2237 if (sc->bnx_irq != NULL) {
2238 bus_release_resource(dev, SYS_RES_IRQ, sc->bnx_irq_rid,
2239 sc->bnx_irq);
2240 }
2241 if (sc->bnx_irq_type == PCI_INTR_TYPE_MSI)
2242 pci_release_msi(dev);
2243
2244 if (sc->bnx_res != NULL) {
2245 bus_release_resource(dev, SYS_RES_MEMORY,
2246 BGE_PCI_BAR0, sc->bnx_res);
2247 }
2248
2249 if (sc->bnx_sysctl_tree != NULL)
2250 sysctl_ctx_free(&sc->bnx_sysctl_ctx);
2251
2252 bnx_dma_free(sc);
2253
2254 return 0;
2255}
2256
2257static void
2258bnx_reset(struct bnx_softc *sc)
2259{
2260 device_t dev;
2261 uint32_t cachesize, command, pcistate, reset;
2262 void (*write_op)(struct bnx_softc *, uint32_t, uint32_t);
2263 int i, val = 0;
2264 uint16_t devctl;
2265
2266 dev = sc->bnx_dev;
2267
2268 if (sc->bnx_asicrev != BGE_ASICREV_BCM5906)
2269 write_op = bnx_writemem_direct;
2270 else
2271 write_op = bnx_writereg_ind;
2272
2273 /* Save some important PCI state. */
2274 cachesize = pci_read_config(dev, BGE_PCI_CACHESZ, 4);
2275 command = pci_read_config(dev, BGE_PCI_CMD, 4);
2276 pcistate = pci_read_config(dev, BGE_PCI_PCISTATE, 4);
2277
2278 pci_write_config(dev, BGE_PCI_MISC_CTL,
2279 BGE_PCIMISCCTL_INDIRECT_ACCESS|BGE_PCIMISCCTL_MASK_PCI_INTR|
2280 BGE_HIF_SWAP_OPTIONS|BGE_PCIMISCCTL_PCISTATE_RW|
2281 BGE_PCIMISCCTL_TAGGED_STATUS, 4);
2282
2283 /* Disable fastboot on controllers that support it. */
2284 if (bootverbose)
2285 if_printf(&sc->arpcom.ac_if, "Disabling fastboot\n");
2286 CSR_WRITE_4(sc, BGE_FASTBOOT_PC, 0x0);
2287
2288 /*
2289 * Write the magic number to SRAM at offset 0xB50.
2290 * When firmware finishes its initialization it will
2291 * write ~BGE_MAGIC_NUMBER to the same location.
2292 */
2293 bnx_writemem_ind(sc, BGE_SOFTWARE_GENCOMM, BGE_MAGIC_NUMBER);
2294
2295 reset = BGE_MISCCFG_RESET_CORE_CLOCKS|(65<<1);
2296
2297 /* XXX: Broadcom Linux driver. */
2298 /* Force PCI-E 1.0a mode */
3730a14d 2299 if (!BNX_IS_57765_PLUS(sc) &&
6c8d8ecc
SZ
2300 CSR_READ_4(sc, BGE_PCIE_PHY_TSTCTL) ==
2301 (BGE_PCIE_PHY_TSTCTL_PSCRAM |
2302 BGE_PCIE_PHY_TSTCTL_PCIE10)) {
2303 CSR_WRITE_4(sc, BGE_PCIE_PHY_TSTCTL,
2304 BGE_PCIE_PHY_TSTCTL_PSCRAM);
2305 }
2306 if (sc->bnx_chipid != BGE_CHIPID_BCM5750_A0) {
2307 /* Prevent PCIE link training during global reset */
2308 CSR_WRITE_4(sc, BGE_MISC_CFG, (1<<29));
2309 reset |= (1<<29);
2310 }
2311
2312 /*
2313 * Set GPHY Power Down Override to leave GPHY
2314 * powered up in D0 uninitialized.
2315 */
2316 if ((sc->bnx_flags & BNX_FLAG_CPMU) == 0)
2317 reset |= BGE_MISCCFG_GPHY_PD_OVERRIDE;
2318
2319 /* Issue global reset */
2320 write_op(sc, BGE_MISC_CFG, reset);
2321
2322 if (sc->bnx_asicrev == BGE_ASICREV_BCM5906) {
2323 uint32_t status, ctrl;
2324
2325 status = CSR_READ_4(sc, BGE_VCPU_STATUS);
2326 CSR_WRITE_4(sc, BGE_VCPU_STATUS,
2327 status | BGE_VCPU_STATUS_DRV_RESET);
2328 ctrl = CSR_READ_4(sc, BGE_VCPU_EXT_CTRL);
2329 CSR_WRITE_4(sc, BGE_VCPU_EXT_CTRL,
2330 ctrl & ~BGE_VCPU_EXT_CTRL_HALT_CPU);
2331 }
2332
2333 DELAY(1000);
2334
2335 /* XXX: Broadcom Linux driver. */
2336 if (sc->bnx_chipid == BGE_CHIPID_BCM5750_A0) {
2337 uint32_t v;
2338
2339 DELAY(500000); /* wait for link training to complete */
2340 v = pci_read_config(dev, 0xc4, 4);
2341 pci_write_config(dev, 0xc4, v | (1<<15), 4);
2342 }
2343
2344 devctl = pci_read_config(dev, sc->bnx_pciecap + PCIER_DEVCTRL, 2);
2345
2346 /* Disable no snoop and disable relaxed ordering. */
2347 devctl &= ~(PCIEM_DEVCTL_RELAX_ORDER | PCIEM_DEVCTL_NOSNOOP);
2348
2349 /* Old PCI-E chips only support 128 bytes Max PayLoad Size. */
2350 if ((sc->bnx_flags & BNX_FLAG_CPMU) == 0) {
2351 devctl &= ~PCIEM_DEVCTL_MAX_PAYLOAD_MASK;
2352 devctl |= PCIEM_DEVCTL_MAX_PAYLOAD_128;
2353 }
2354
2355 pci_write_config(dev, sc->bnx_pciecap + PCIER_DEVCTRL,
2356 devctl, 2);
2357
2358 /* Clear error status. */
2359 pci_write_config(dev, sc->bnx_pciecap + PCIER_DEVSTS,
2360 PCIEM_DEVSTS_CORR_ERR |
2361 PCIEM_DEVSTS_NFATAL_ERR |
2362 PCIEM_DEVSTS_FATAL_ERR |
2363 PCIEM_DEVSTS_UNSUPP_REQ, 2);
2364
2365 /* Reset some of the PCI state that got zapped by reset */
2366 pci_write_config(dev, BGE_PCI_MISC_CTL,
2367 BGE_PCIMISCCTL_INDIRECT_ACCESS|BGE_PCIMISCCTL_MASK_PCI_INTR|
2368 BGE_HIF_SWAP_OPTIONS|BGE_PCIMISCCTL_PCISTATE_RW|
2369 BGE_PCIMISCCTL_TAGGED_STATUS, 4);
2370 pci_write_config(dev, BGE_PCI_CACHESZ, cachesize, 4);
2371 pci_write_config(dev, BGE_PCI_CMD, command, 4);
2372 write_op(sc, BGE_MISC_CFG, (65 << 1));
2373
2374 /* Enable memory arbiter */
2375 CSR_WRITE_4(sc, BGE_MARB_MODE, BGE_MARBMODE_ENABLE);
2376
2377 if (sc->bnx_asicrev == BGE_ASICREV_BCM5906) {
2378 for (i = 0; i < BNX_TIMEOUT; i++) {
2379 val = CSR_READ_4(sc, BGE_VCPU_STATUS);
2380 if (val & BGE_VCPU_STATUS_INIT_DONE)
2381 break;
2382 DELAY(100);
2383 }
2384 if (i == BNX_TIMEOUT) {
2385 if_printf(&sc->arpcom.ac_if, "reset timed out\n");
2386 return;
2387 }
2388 } else {
2389 /*
2390 * Poll until we see the 1's complement of the magic number.
2391 * This indicates that the firmware initialization
2392 * is complete.
2393 */
2394 for (i = 0; i < BNX_FIRMWARE_TIMEOUT; i++) {
2395 val = bnx_readmem_ind(sc, BGE_SOFTWARE_GENCOMM);
2396 if (val == ~BGE_MAGIC_NUMBER)
2397 break;
2398 DELAY(10);
2399 }
2400 if (i == BNX_FIRMWARE_TIMEOUT) {
2401 if_printf(&sc->arpcom.ac_if, "firmware handshake "
2402 "timed out, found 0x%08x\n", val);
2403 }
2404
2405 /* BCM57765 A0 needs additional time before accessing. */
2406 if (sc->bnx_chipid == BGE_CHIPID_BCM57765_A0)
2407 DELAY(10 * 1000);
2408 }
2409
2410 /*
2411 * XXX Wait for the value of the PCISTATE register to
2412 * return to its original pre-reset state. This is a
2413 * fairly good indicator of reset completion. If we don't
2414 * wait for the reset to fully complete, trying to read
2415 * from the device's non-PCI registers may yield garbage
2416 * results.
2417 */
2418 for (i = 0; i < BNX_TIMEOUT; i++) {
2419 if (pci_read_config(dev, BGE_PCI_PCISTATE, 4) == pcistate)
2420 break;
2421 DELAY(10);
2422 }
2423
2424 /* Fix up byte swapping */
2425 CSR_WRITE_4(sc, BGE_MODE_CTL, bnx_dma_swap_options(sc));
2426
2427 CSR_WRITE_4(sc, BGE_MAC_MODE, 0);
2428
2429 /*
2430 * The 5704 in TBI mode apparently needs some special
2431 * adjustment to insure the SERDES drive level is set
2432 * to 1.2V.
2433 */
2434 if (sc->bnx_asicrev == BGE_ASICREV_BCM5704 &&
2435 (sc->bnx_flags & BNX_FLAG_TBI)) {
2436 uint32_t serdescfg;
2437
2438 serdescfg = CSR_READ_4(sc, BGE_SERDES_CFG);
2439 serdescfg = (serdescfg & ~0xFFF) | 0x880;
2440 CSR_WRITE_4(sc, BGE_SERDES_CFG, serdescfg);
2441 }
2442
2443 /* XXX: Broadcom Linux driver. */
3730a14d 2444 if (!BNX_IS_57765_PLUS(sc)) {
6c8d8ecc
SZ
2445 uint32_t v;
2446
2447 /* Enable Data FIFO protection. */
f1f34fc4
SZ
2448 v = CSR_READ_4(sc, BGE_PCIE_TLDLPL_PORT);
2449 CSR_WRITE_4(sc, BGE_PCIE_TLDLPL_PORT, v | (1 << 25));
6c8d8ecc
SZ
2450 }
2451
2452 DELAY(10000);
2453
2454 if (sc->bnx_asicrev == BGE_ASICREV_BCM5720) {
2455 BNX_CLRBIT(sc, BGE_CPMU_CLCK_ORIDE,
2456 CPMU_CLCK_ORIDE_MAC_ORIDE_EN);
2457 }
2458}
2459
2460/*
2461 * Frame reception handling. This is called if there's a frame
2462 * on the receive return list.
2463 *
2464 * Note: we have to be able to handle two possibilities here:
2465 * 1) the frame is from the jumbo recieve ring
2466 * 2) the frame is from the standard receive ring
2467 */
2468
2469static void
2470bnx_rxeof(struct bnx_softc *sc, uint16_t rx_prod)
2471{
2472 struct ifnet *ifp;
2473 int stdcnt = 0, jumbocnt = 0;
2474
2475 ifp = &sc->arpcom.ac_if;
2476
2477 while (sc->bnx_rx_saved_considx != rx_prod) {
2478 struct bge_rx_bd *cur_rx;
2479 uint32_t rxidx;
2480 struct mbuf *m = NULL;
2481 uint16_t vlan_tag = 0;
2482 int have_tag = 0;
2483
2484 cur_rx =
2485 &sc->bnx_ldata.bnx_rx_return_ring[sc->bnx_rx_saved_considx];
2486
2487 rxidx = cur_rx->bge_idx;
2488 BNX_INC(sc->bnx_rx_saved_considx, sc->bnx_return_ring_cnt);
2489
2490 if (cur_rx->bge_flags & BGE_RXBDFLAG_VLAN_TAG) {
2491 have_tag = 1;
2492 vlan_tag = cur_rx->bge_vlan_tag;
2493 }
2494
2495 if (cur_rx->bge_flags & BGE_RXBDFLAG_JUMBO_RING) {
2496 BNX_INC(sc->bnx_jumbo, BGE_JUMBO_RX_RING_CNT);
2497 jumbocnt++;
2498
2499 if (rxidx != sc->bnx_jumbo) {
2500 ifp->if_ierrors++;
2501 if_printf(ifp, "sw jumbo index(%d) "
2502 "and hw jumbo index(%d) mismatch, drop!\n",
2503 sc->bnx_jumbo, rxidx);
2504 bnx_setup_rxdesc_jumbo(sc, rxidx);
2505 continue;
2506 }
2507
2508 m = sc->bnx_cdata.bnx_rx_jumbo_chain[rxidx].bnx_mbuf;
2509 if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) {
2510 ifp->if_ierrors++;
2511 bnx_setup_rxdesc_jumbo(sc, sc->bnx_jumbo);
2512 continue;
2513 }
2514 if (bnx_newbuf_jumbo(sc, sc->bnx_jumbo, 0)) {
2515 ifp->if_ierrors++;
2516 bnx_setup_rxdesc_jumbo(sc, sc->bnx_jumbo);
2517 continue;
2518 }
2519 } else {
2520 BNX_INC(sc->bnx_std, BGE_STD_RX_RING_CNT);
2521 stdcnt++;
2522
2523 if (rxidx != sc->bnx_std) {
2524 ifp->if_ierrors++;
2525 if_printf(ifp, "sw std index(%d) "
2526 "and hw std index(%d) mismatch, drop!\n",
2527 sc->bnx_std, rxidx);
2528 bnx_setup_rxdesc_std(sc, rxidx);
2529 continue;
2530 }
2531
2532 m = sc->bnx_cdata.bnx_rx_std_chain[rxidx].bnx_mbuf;
2533 if (cur_rx->bge_flags & BGE_RXBDFLAG_ERROR) {
2534 ifp->if_ierrors++;
2535 bnx_setup_rxdesc_std(sc, sc->bnx_std);
2536 continue;
2537 }
2538 if (bnx_newbuf_std(sc, sc->bnx_std, 0)) {
2539 ifp->if_ierrors++;
2540 bnx_setup_rxdesc_std(sc, sc->bnx_std);
2541 continue;
2542 }
2543 }
2544
2545 ifp->if_ipackets++;
2546 m->m_pkthdr.len = m->m_len = cur_rx->bge_len - ETHER_CRC_LEN;
2547 m->m_pkthdr.rcvif = ifp;
2548
2549 if ((ifp->if_capenable & IFCAP_RXCSUM) &&
2550 (cur_rx->bge_flags & BGE_RXBDFLAG_IPV6) == 0) {
2551 if (cur_rx->bge_flags & BGE_RXBDFLAG_IP_CSUM) {
2552 m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
2553 if ((cur_rx->bge_error_flag &
2554 BGE_RXERRFLAG_IP_CSUM_NOK) == 0)
2555 m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
2556 }
2557 if (cur_rx->bge_flags & BGE_RXBDFLAG_TCP_UDP_CSUM) {
2558 m->m_pkthdr.csum_data =
2559 cur_rx->bge_tcp_udp_csum;
2560 m->m_pkthdr.csum_flags |= CSUM_DATA_VALID |
2561 CSUM_PSEUDO_HDR;
2562 }
2563 }
2564
2565 /*
2566 * If we received a packet with a vlan tag, pass it
2567 * to vlan_input() instead of ether_input().
2568 */
2569 if (have_tag) {
2570 m->m_flags |= M_VLANTAG;
2571 m->m_pkthdr.ether_vlantag = vlan_tag;
2572 have_tag = vlan_tag = 0;
2573 }
2574 ifp->if_input(ifp, m);
2575 }
2576
2577 bnx_writembx(sc, BGE_MBX_RX_CONS0_LO, sc->bnx_rx_saved_considx);
2578 if (stdcnt)
2579 bnx_writembx(sc, BGE_MBX_RX_STD_PROD_LO, sc->bnx_std);
2580 if (jumbocnt)
2581 bnx_writembx(sc, BGE_MBX_RX_JUMBO_PROD_LO, sc->bnx_jumbo);
2582}
2583
2584static void
2585bnx_txeof(struct bnx_softc *sc, uint16_t tx_cons)
2586{
6c8d8ecc
SZ
2587 struct ifnet *ifp;
2588
2589 ifp = &sc->arpcom.ac_if;
2590
2591 /*
2592 * Go through our tx ring and free mbufs for those
2593 * frames that have been sent.
2594 */
2595 while (sc->bnx_tx_saved_considx != tx_cons) {
2596 uint32_t idx = 0;
2597
2598 idx = sc->bnx_tx_saved_considx;
6c8d8ecc 2599 if (sc->bnx_cdata.bnx_tx_chain[idx] != NULL) {
9a103adf 2600 ifp->if_opackets++;
6c8d8ecc
SZ
2601 bus_dmamap_unload(sc->bnx_cdata.bnx_tx_mtag,
2602 sc->bnx_cdata.bnx_tx_dmamap[idx]);
2603 m_freem(sc->bnx_cdata.bnx_tx_chain[idx]);
2604 sc->bnx_cdata.bnx_tx_chain[idx] = NULL;
2605 }
2606 sc->bnx_txcnt--;
2607 BNX_INC(sc->bnx_tx_saved_considx, BGE_TX_RING_CNT);
2608 }
2609
9a103adf 2610 if ((BGE_TX_RING_CNT - sc->bnx_txcnt) >=
6c8d8ecc
SZ
2611 (BNX_NSEG_RSVD + BNX_NSEG_SPARE))
2612 ifp->if_flags &= ~IFF_OACTIVE;
2613
2614 if (sc->bnx_txcnt == 0)
2615 ifp->if_timer = 0;
2616
2617 if (!ifq_is_empty(&ifp->if_snd))
2618 if_devstart(ifp);
2619}
2620
2621#ifdef DEVICE_POLLING
2622
2623static void
2624bnx_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
2625{
2626 struct bnx_softc *sc = ifp->if_softc;
2627 struct bge_status_block *sblk = sc->bnx_ldata.bnx_status_block;
2628 uint16_t rx_prod, tx_cons;
2629
2630 switch(cmd) {
2631 case POLL_REGISTER:
2632 bnx_disable_intr(sc);
2633 break;
2634 case POLL_DEREGISTER:
2635 bnx_enable_intr(sc);
2636 break;
2637 case POLL_AND_CHECK_STATUS:
2638 /*
2639 * Process link state changes.
2640 */
2641 bnx_link_poll(sc);
2642 /* Fall through */
2643 case POLL_ONLY:
2644 sc->bnx_status_tag = sblk->bge_status_tag;
2645 /*
2646 * Use a load fence to ensure that status_tag
2647 * is saved before rx_prod and tx_cons.
2648 */
2649 cpu_lfence();
2650
2651 rx_prod = sblk->bge_idx[0].bge_rx_prod_idx;
2652 tx_cons = sblk->bge_idx[0].bge_tx_cons_idx;
2653 if (ifp->if_flags & IFF_RUNNING) {
2654 rx_prod = sblk->bge_idx[0].bge_rx_prod_idx;
2655 if (sc->bnx_rx_saved_considx != rx_prod)
2656 bnx_rxeof(sc, rx_prod);
2657
2658 tx_cons = sblk->bge_idx[0].bge_tx_cons_idx;
2659 if (sc->bnx_tx_saved_considx != tx_cons)
2660 bnx_txeof(sc, tx_cons);
2661 }
2662 break;
2663 }
2664}
2665
2666#endif
2667
2668static void
2669bnx_intr_legacy(void *xsc)
2670{
2671 struct bnx_softc *sc = xsc;
2672 struct bge_status_block *sblk = sc->bnx_ldata.bnx_status_block;
2673
2674 if (sc->bnx_status_tag == sblk->bge_status_tag) {
2675 uint32_t val;
2676
2677 val = pci_read_config(sc->bnx_dev, BGE_PCI_PCISTATE, 4);
2678 if (val & BGE_PCISTAT_INTR_NOTACT)
2679 return;
2680 }
2681
2682 /*
2683 * NOTE:
2684 * Interrupt will have to be disabled if tagged status
2685 * is used, else interrupt will always be asserted on
2686 * certain chips (at least on BCM5750 AX/BX).
2687 */
2688 bnx_writembx(sc, BGE_MBX_IRQ0_LO, 1);
2689
2690 bnx_intr(sc);
2691}
2692
2693static void
2694bnx_msi(void *xsc)
2695{
2696 struct bnx_softc *sc = xsc;
2697
2698 /* Disable interrupt first */
2699 bnx_writembx(sc, BGE_MBX_IRQ0_LO, 1);
2700 bnx_intr(sc);
2701}
2702
2703static void
2704bnx_msi_oneshot(void *xsc)
2705{
2706 bnx_intr(xsc);
2707}
2708
2709static void
2710bnx_intr(struct bnx_softc *sc)
2711{
2712 struct ifnet *ifp = &sc->arpcom.ac_if;
2713 struct bge_status_block *sblk = sc->bnx_ldata.bnx_status_block;
2714 uint16_t rx_prod, tx_cons;
2715 uint32_t status;
2716
2717 sc->bnx_status_tag = sblk->bge_status_tag;
2718 /*
2719 * Use a load fence to ensure that status_tag is saved
2720 * before rx_prod, tx_cons and status.
2721 */
2722 cpu_lfence();
2723
2724 rx_prod = sblk->bge_idx[0].bge_rx_prod_idx;
2725 tx_cons = sblk->bge_idx[0].bge_tx_cons_idx;
2726 status = sblk->bge_status;
2727
2728 if ((status & BGE_STATFLAG_LINKSTATE_CHANGED) || sc->bnx_link_evt)
2729 bnx_link_poll(sc);
2730
2731 if (ifp->if_flags & IFF_RUNNING) {
2732 if (sc->bnx_rx_saved_considx != rx_prod)
2733 bnx_rxeof(sc, rx_prod);
2734
2735 if (sc->bnx_tx_saved_considx != tx_cons)
2736 bnx_txeof(sc, tx_cons);
2737 }
2738
2739 bnx_writembx(sc, BGE_MBX_IRQ0_LO, sc->bnx_status_tag << 24);
2740
2741 if (sc->bnx_coal_chg)
2742 bnx_coal_change(sc);
2743}
2744
2745static void
2746bnx_tick(void *xsc)
2747{
2748 struct bnx_softc *sc = xsc;
2749 struct ifnet *ifp = &sc->arpcom.ac_if;
2750
2751 lwkt_serialize_enter(ifp->if_serializer);
2752
8ca0f604
SZ
2753 KKASSERT(mycpuid == sc->bnx_stat_cpuid);
2754
6c8d8ecc
SZ
2755 bnx_stats_update_regs(sc);
2756
2757 if (sc->bnx_flags & BNX_FLAG_TBI) {
2758 /*
2759 * Since in TBI mode auto-polling can't be used we should poll
2760 * link status manually. Here we register pending link event
2761 * and trigger interrupt.
2762 */
2763 sc->bnx_link_evt++;
2764 BNX_SETBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_COAL_NOW);
2765 } else if (!sc->bnx_link) {
2766 mii_tick(device_get_softc(sc->bnx_miibus));
2767 }
2768
2769 callout_reset(&sc->bnx_stat_timer, hz, bnx_tick, sc);
2770
2771 lwkt_serialize_exit(ifp->if_serializer);
2772}
2773
2774static void
2775bnx_stats_update_regs(struct bnx_softc *sc)
2776{
2777 struct ifnet *ifp = &sc->arpcom.ac_if;
2778 struct bge_mac_stats_regs stats;
2779 uint32_t *s;
2780 int i;
2781
2782 s = (uint32_t *)&stats;
2783 for (i = 0; i < sizeof(struct bge_mac_stats_regs); i += 4) {
2784 *s = CSR_READ_4(sc, BGE_RX_STATS + i);
2785 s++;
2786 }
2787
2788 ifp->if_collisions +=
2789 (stats.dot3StatsSingleCollisionFrames +
2790 stats.dot3StatsMultipleCollisionFrames +
2791 stats.dot3StatsExcessiveCollisions +
2792 stats.dot3StatsLateCollisions) -
2793 ifp->if_collisions;
2794}
2795
2796/*
2797 * Encapsulate an mbuf chain in the tx ring by coupling the mbuf data
2798 * pointers to descriptors.
2799 */
2800static int
2801bnx_encap(struct bnx_softc *sc, struct mbuf **m_head0, uint32_t *txidx)
2802{
2803 struct bge_tx_bd *d = NULL;
66deb1c1 2804 uint16_t csum_flags = 0, vlan_tag = 0, mss = 0;
6c8d8ecc
SZ
2805 bus_dma_segment_t segs[BNX_NSEG_NEW];
2806 bus_dmamap_t map;
2807 int error, maxsegs, nsegs, idx, i;
2808 struct mbuf *m_head = *m_head0, *m_new;
2809
66deb1c1
SZ
2810 if (m_head->m_pkthdr.csum_flags & CSUM_TSO) {
2811#ifdef BNX_TSO_DEBUG
2812 int tso_nsegs;
2813#endif
2814
2815 error = bnx_setup_tso(sc, m_head0, &mss, &csum_flags);
2816 if (error)
2817 return error;
2818 m_head = *m_head0;
2819
2820#ifdef BNX_TSO_DEBUG
f0336d39
SZ
2821 tso_nsegs = (m_head->m_pkthdr.len /
2822 m_head->m_pkthdr.tso_segsz) - 1;
66deb1c1
SZ
2823 if (tso_nsegs > (BNX_TSO_NSTATS - 1))
2824 tso_nsegs = BNX_TSO_NSTATS - 1;
2825 else if (tso_nsegs < 0)
2826 tso_nsegs = 0;
2827 sc->bnx_tsosegs[tso_nsegs]++;
2828#endif
2829 } else if (m_head->m_pkthdr.csum_flags & BNX_CSUM_FEATURES) {
6c8d8ecc
SZ
2830 if (m_head->m_pkthdr.csum_flags & CSUM_IP)
2831 csum_flags |= BGE_TXBDFLAG_IP_CSUM;
2832 if (m_head->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP))
2833 csum_flags |= BGE_TXBDFLAG_TCP_UDP_CSUM;
2834 if (m_head->m_flags & M_LASTFRAG)
2835 csum_flags |= BGE_TXBDFLAG_IP_FRAG_END;
2836 else if (m_head->m_flags & M_FRAG)
2837 csum_flags |= BGE_TXBDFLAG_IP_FRAG;
2838 }
66deb1c1
SZ
2839 if (m_head->m_flags & M_VLANTAG) {
2840 csum_flags |= BGE_TXBDFLAG_VLAN_TAG;
2841 vlan_tag = m_head->m_pkthdr.ether_vlantag;
2842 }
6c8d8ecc
SZ
2843
2844 idx = *txidx;
2845 map = sc->bnx_cdata.bnx_tx_dmamap[idx];
2846
2847 maxsegs = (BGE_TX_RING_CNT - sc->bnx_txcnt) - BNX_NSEG_RSVD;
2848 KASSERT(maxsegs >= BNX_NSEG_SPARE,
2849 ("not enough segments %d", maxsegs));
2850
2851 if (maxsegs > BNX_NSEG_NEW)
2852 maxsegs = BNX_NSEG_NEW;
2853
2854 /*
2855 * Pad outbound frame to BGE_MIN_FRAMELEN for an unusual reason.
2856 * The bge hardware will pad out Tx runts to BGE_MIN_FRAMELEN,
2857 * but when such padded frames employ the bge IP/TCP checksum
2858 * offload, the hardware checksum assist gives incorrect results
2859 * (possibly from incorporating its own padding into the UDP/TCP
2860 * checksum; who knows). If we pad such runts with zeros, the
2861 * onboard checksum comes out correct.
2862 */
2863 if ((csum_flags & BGE_TXBDFLAG_TCP_UDP_CSUM) &&
2864 m_head->m_pkthdr.len < BNX_MIN_FRAMELEN) {
2865 error = m_devpad(m_head, BNX_MIN_FRAMELEN);
2866 if (error)
2867 goto back;
2868 }
2869
2870 if ((sc->bnx_flags & BNX_FLAG_SHORTDMA) && m_head->m_next != NULL) {
2871 m_new = bnx_defrag_shortdma(m_head);
2872 if (m_new == NULL) {
2873 error = ENOBUFS;
2874 goto back;
2875 }
2876 *m_head0 = m_head = m_new;
2877 }
66deb1c1
SZ
2878 if ((m_head->m_pkthdr.csum_flags & CSUM_TSO) == 0 &&
2879 sc->bnx_force_defrag && m_head->m_next != NULL) {
6c8d8ecc
SZ
2880 /*
2881 * Forcefully defragment mbuf chain to overcome hardware
2882 * limitation which only support a single outstanding
2883 * DMA read operation. If it fails, keep moving on using
2884 * the original mbuf chain.
2885 */
2886 m_new = m_defrag(m_head, MB_DONTWAIT);
2887 if (m_new != NULL)
2888 *m_head0 = m_head = m_new;
2889 }
2890
2891 error = bus_dmamap_load_mbuf_defrag(sc->bnx_cdata.bnx_tx_mtag, map,
2892 m_head0, segs, maxsegs, &nsegs, BUS_DMA_NOWAIT);
2893 if (error)
2894 goto back;
2895
2896 m_head = *m_head0;
2897 bus_dmamap_sync(sc->bnx_cdata.bnx_tx_mtag, map, BUS_DMASYNC_PREWRITE);
2898
2899 for (i = 0; ; i++) {
2900 d = &sc->bnx_ldata.bnx_tx_ring[idx];
2901
2902 d->bge_addr.bge_addr_lo = BGE_ADDR_LO(segs[i].ds_addr);
2903 d->bge_addr.bge_addr_hi = BGE_ADDR_HI(segs[i].ds_addr);
2904 d->bge_len = segs[i].ds_len;
2905 d->bge_flags = csum_flags;
66deb1c1
SZ
2906 d->bge_vlan_tag = vlan_tag;
2907 d->bge_mss = mss;
6c8d8ecc
SZ
2908
2909 if (i == nsegs - 1)
2910 break;
2911 BNX_INC(idx, BGE_TX_RING_CNT);
2912 }
2913 /* Mark the last segment as end of packet... */
2914 d->bge_flags |= BGE_TXBDFLAG_END;
2915
6c8d8ecc
SZ
2916 /*
2917 * Insure that the map for this transmission is placed at
2918 * the array index of the last descriptor in this chain.
2919 */
2920 sc->bnx_cdata.bnx_tx_dmamap[*txidx] = sc->bnx_cdata.bnx_tx_dmamap[idx];
2921 sc->bnx_cdata.bnx_tx_dmamap[idx] = map;
2922 sc->bnx_cdata.bnx_tx_chain[idx] = m_head;
2923 sc->bnx_txcnt += nsegs;
2924
2925 BNX_INC(idx, BGE_TX_RING_CNT);
2926 *txidx = idx;
2927back:
2928 if (error) {
2929 m_freem(*m_head0);
2930 *m_head0 = NULL;
2931 }
2932 return error;
2933}
2934
2935/*
2936 * Main transmit routine. To avoid having to do mbuf copies, we put pointers
2937 * to the mbuf data regions directly in the transmit descriptors.
2938 */
2939static void
2940bnx_start(struct ifnet *ifp)
2941{
2942 struct bnx_softc *sc = ifp->if_softc;
2943 struct mbuf *m_head = NULL;
2944 uint32_t prodidx;
2945 int need_trans;
2946
2947 if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
2948 return;
2949
2950 prodidx = sc->bnx_tx_prodidx;
2951
2952 need_trans = 0;
2953 while (sc->bnx_cdata.bnx_tx_chain[prodidx] == NULL) {
6c8d8ecc
SZ
2954 /*
2955 * Sanity check: avoid coming within BGE_NSEG_RSVD
2956 * descriptors of the end of the ring. Also make
2957 * sure there are BGE_NSEG_SPARE descriptors for
a1bd58c9 2958 * jumbo buffers' or TSO segments' defragmentation.
6c8d8ecc
SZ
2959 */
2960 if ((BGE_TX_RING_CNT - sc->bnx_txcnt) <
2961 (BNX_NSEG_RSVD + BNX_NSEG_SPARE)) {
2962 ifp->if_flags |= IFF_OACTIVE;
6c8d8ecc
SZ
2963 break;
2964 }
2965
a1bd58c9
SZ
2966 m_head = ifq_dequeue(&ifp->if_snd, NULL);
2967 if (m_head == NULL)
2968 break;
2969
6c8d8ecc
SZ
2970 /*
2971 * Pack the data into the transmit ring. If we
2972 * don't have room, set the OACTIVE flag and wait
2973 * for the NIC to drain the ring.
2974 */
2975 if (bnx_encap(sc, &m_head, &prodidx)) {
2976 ifp->if_flags |= IFF_OACTIVE;
2977 ifp->if_oerrors++;
2978 break;
2979 }
2980 need_trans = 1;
2981
2982 ETHER_BPF_MTAP(ifp, m_head);
2983 }
2984
2985 if (!need_trans)
2986 return;
2987
2988 /* Transmit */
2989 bnx_writembx(sc, BGE_MBX_TX_HOST_PROD0_LO, prodidx);
2990
2991 sc->bnx_tx_prodidx = prodidx;
2992
2993 /*
2994 * Set a timeout in case the chip goes out to lunch.
2995 */
2996 ifp->if_timer = 5;
2997}
2998
2999static void
3000bnx_init(void *xsc)
3001{
3002 struct bnx_softc *sc = xsc;
3003 struct ifnet *ifp = &sc->arpcom.ac_if;
3004 uint16_t *m;
3005 uint32_t mode;
3006
3007 ASSERT_SERIALIZED(ifp->if_serializer);
3008
3009 /* Cancel pending I/O and flush buffers. */
3010 bnx_stop(sc);
3011 bnx_reset(sc);
3012 bnx_chipinit(sc);
3013
3014 /*
3015 * Init the various state machines, ring
3016 * control blocks and firmware.
3017 */
3018 if (bnx_blockinit(sc)) {
3019 if_printf(ifp, "initialization failure\n");
3020 bnx_stop(sc);
3021 return;
3022 }
3023
3024 /* Specify MTU. */
3025 CSR_WRITE_4(sc, BGE_RX_MTU, ifp->if_mtu +
3026 ETHER_HDR_LEN + ETHER_CRC_LEN + EVL_ENCAPLEN);
3027
3028 /* Load our MAC address. */
3029 m = (uint16_t *)&sc->arpcom.ac_enaddr[0];
3030 CSR_WRITE_4(sc, BGE_MAC_ADDR1_LO, htons(m[0]));
3031 CSR_WRITE_4(sc, BGE_MAC_ADDR1_HI, (htons(m[1]) << 16) | htons(m[2]));
3032
3033 /* Enable or disable promiscuous mode as needed. */
3034 bnx_setpromisc(sc);
3035
3036 /* Program multicast filter. */
3037 bnx_setmulti(sc);
3038
3039 /* Init RX ring. */
3040 if (bnx_init_rx_ring_std(sc)) {
3041 if_printf(ifp, "RX ring initialization failed\n");
3042 bnx_stop(sc);
3043 return;
3044 }
3045
3046 /* Init jumbo RX ring. */
3047 if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN)) {
3048 if (bnx_init_rx_ring_jumbo(sc)) {
3049 if_printf(ifp, "Jumbo RX ring initialization failed\n");
3050 bnx_stop(sc);
3051 return;
3052 }
3053 }
3054
3055 /* Init our RX return ring index */
3056 sc->bnx_rx_saved_considx = 0;
3057
3058 /* Init TX ring. */
3059 bnx_init_tx_ring(sc);
3060
3061 /* Enable TX MAC state machine lockup fix. */
3062 mode = CSR_READ_4(sc, BGE_TX_MODE);
3063 mode |= BGE_TXMODE_MBUF_LOCKUP_FIX;
3064 if (sc->bnx_asicrev == BGE_ASICREV_BCM5720) {
3065 mode &= ~(BGE_TXMODE_JMB_FRM_LEN | BGE_TXMODE_CNT_DN_MODE);
3066 mode |= CSR_READ_4(sc, BGE_TX_MODE) &
3067 (BGE_TXMODE_JMB_FRM_LEN | BGE_TXMODE_CNT_DN_MODE);
3068 }
3069 /* Turn on transmitter */
3070 CSR_WRITE_4(sc, BGE_TX_MODE, mode | BGE_TXMODE_ENABLE);
3071
3072 /* Turn on receiver */
3073 BNX_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_ENABLE);
3074
3075 /*
3076 * Set the number of good frames to receive after RX MBUF
3077 * Low Watermark has been reached. After the RX MAC receives
3078 * this number of frames, it will drop subsequent incoming
3079 * frames until the MBUF High Watermark is reached.
3080 */
bcb29629 3081 if (BNX_IS_57765_FAMILY(sc))
6c8d8ecc
SZ
3082 CSR_WRITE_4(sc, BGE_MAX_RX_FRAME_LOWAT, 1);
3083 else
3084 CSR_WRITE_4(sc, BGE_MAX_RX_FRAME_LOWAT, 2);
3085
3086 if (sc->bnx_irq_type == PCI_INTR_TYPE_MSI) {
3087 if (bootverbose) {
3088 if_printf(ifp, "MSI_MODE: %#x\n",
3089 CSR_READ_4(sc, BGE_MSI_MODE));
3090 }
3091 }
3092
3093 /* Tell firmware we're alive. */
3094 BNX_SETBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP);
3095
3096 /* Enable host interrupts if polling(4) is not enabled. */
3097 PCI_SETBIT(sc->bnx_dev, BGE_PCI_MISC_CTL, BGE_PCIMISCCTL_CLEAR_INTA, 4);
3098#ifdef DEVICE_POLLING
3099 if (ifp->if_flags & IFF_POLLING)
3100 bnx_disable_intr(sc);
3101 else
3102#endif
3103 bnx_enable_intr(sc);
3104
3105 bnx_ifmedia_upd(ifp);
3106
3107 ifp->if_flags |= IFF_RUNNING;
3108 ifp->if_flags &= ~IFF_OACTIVE;
3109
8ca0f604
SZ
3110 callout_reset_bycpu(&sc->bnx_stat_timer, hz, bnx_tick, sc,
3111 sc->bnx_stat_cpuid);
6c8d8ecc
SZ
3112}
3113
3114/*
3115 * Set media options.
3116 */
3117static int
3118bnx_ifmedia_upd(struct ifnet *ifp)
3119{
3120 struct bnx_softc *sc = ifp->if_softc;
3121
3122 /* If this is a 1000baseX NIC, enable the TBI port. */
3123 if (sc->bnx_flags & BNX_FLAG_TBI) {
3124 struct ifmedia *ifm = &sc->bnx_ifmedia;
3125
3126 if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
3127 return(EINVAL);
3128
3129 switch(IFM_SUBTYPE(ifm->ifm_media)) {
3130 case IFM_AUTO:
3131 break;
3132
3133 case IFM_1000_SX:
3134 if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) {
3135 BNX_CLRBIT(sc, BGE_MAC_MODE,
3136 BGE_MACMODE_HALF_DUPLEX);
3137 } else {
3138 BNX_SETBIT(sc, BGE_MAC_MODE,
3139 BGE_MACMODE_HALF_DUPLEX);
3140 }
3141 break;
3142 default:
3143 return(EINVAL);
3144 }
3145 } else {
3146 struct mii_data *mii = device_get_softc(sc->bnx_miibus);
3147
3148 sc->bnx_link_evt++;
3149 sc->bnx_link = 0;
3150 if (mii->mii_instance) {
3151 struct mii_softc *miisc;
3152
3153 LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
3154 mii_phy_reset(miisc);
3155 }
3156 mii_mediachg(mii);
3157
3158 /*
3159 * Force an interrupt so that we will call bnx_link_upd
3160 * if needed and clear any pending link state attention.
3161 * Without this we are not getting any further interrupts
3162 * for link state changes and thus will not UP the link and
3163 * not be able to send in bnx_start. The only way to get
3164 * things working was to receive a packet and get an RX
3165 * intr.
3166 *
3167 * bnx_tick should help for fiber cards and we might not
3168 * need to do this here if BNX_FLAG_TBI is set but as
3169 * we poll for fiber anyway it should not harm.
3170 */
3171 BNX_SETBIT(sc, BGE_HCC_MODE, BGE_HCCMODE_COAL_NOW);
3172 }
3173 return(0);
3174}
3175
3176/*
3177 * Report current media status.
3178 */
3179static void
3180bnx_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
3181{
3182 struct bnx_softc *sc = ifp->if_softc;
3183
3184 if (sc->bnx_flags & BNX_FLAG_TBI) {
3185 ifmr->ifm_status = IFM_AVALID;
3186 ifmr->ifm_active = IFM_ETHER;
3187 if (CSR_READ_4(sc, BGE_MAC_STS) &
3188 BGE_MACSTAT_TBI_PCS_SYNCHED) {
3189 ifmr->ifm_status |= IFM_ACTIVE;
3190 } else {
3191 ifmr->ifm_active |= IFM_NONE;
3192 return;
3193 }
3194
3195 ifmr->ifm_active |= IFM_1000_SX;
3196 if (CSR_READ_4(sc, BGE_MAC_MODE) & BGE_MACMODE_HALF_DUPLEX)
3197 ifmr->ifm_active |= IFM_HDX;
3198 else
3199 ifmr->ifm_active |= IFM_FDX;
3200 } else {
3201 struct mii_data *mii = device_get_softc(sc->bnx_miibus);
3202
3203 mii_pollstat(mii);
3204 ifmr->ifm_active = mii->mii_media_active;
3205 ifmr->ifm_status = mii->mii_media_status;
3206 }
3207}
3208
3209static int
3210bnx_ioctl(struct ifnet *ifp, u_long command, caddr_t data, struct ucred *cr)
3211{
3212 struct bnx_softc *sc = ifp->if_softc;
3213 struct ifreq *ifr = (struct ifreq *)data;
3214 int mask, error = 0;
3215
3216 ASSERT_SERIALIZED(ifp->if_serializer);
3217
3218 switch (command) {
3219 case SIOCSIFMTU:
3220 if ((!BNX_IS_JUMBO_CAPABLE(sc) && ifr->ifr_mtu > ETHERMTU) ||
3221 (BNX_IS_JUMBO_CAPABLE(sc) &&
3222 ifr->ifr_mtu > BNX_JUMBO_MTU)) {
3223 error = EINVAL;
3224 } else if (ifp->if_mtu != ifr->ifr_mtu) {
3225 ifp->if_mtu = ifr->ifr_mtu;
3226 if (ifp->if_flags & IFF_RUNNING)
3227 bnx_init(sc);
3228 }
3229 break;
3230 case SIOCSIFFLAGS:
3231 if (ifp->if_flags & IFF_UP) {
3232 if (ifp->if_flags & IFF_RUNNING) {
3233 mask = ifp->if_flags ^ sc->bnx_if_flags;
3234
3235 /*
3236 * If only the state of the PROMISC flag
3237 * changed, then just use the 'set promisc
3238 * mode' command instead of reinitializing
3239 * the entire NIC. Doing a full re-init
3240 * means reloading the firmware and waiting
3241 * for it to start up, which may take a
3242 * second or two. Similarly for ALLMULTI.
3243 */
3244 if (mask & IFF_PROMISC)
3245 bnx_setpromisc(sc);
3246 if (mask & IFF_ALLMULTI)
3247 bnx_setmulti(sc);
3248 } else {
3249 bnx_init(sc);
3250 }
3251 } else if (ifp->if_flags & IFF_RUNNING) {
3252 bnx_stop(sc);
3253 }
3254 sc->bnx_if_flags = ifp->if_flags;
3255 break;
3256 case SIOCADDMULTI:
3257 case SIOCDELMULTI:
3258 if (ifp->if_flags & IFF_RUNNING)
3259 bnx_setmulti(sc);
3260 break;
3261 case SIOCSIFMEDIA:
3262 case SIOCGIFMEDIA:
3263 if (sc->bnx_flags & BNX_FLAG_TBI) {
3264 error = ifmedia_ioctl(ifp, ifr,
3265 &sc->bnx_ifmedia, command);
3266 } else {
3267 struct mii_data *mii;
3268
3269 mii = device_get_softc(sc->bnx_miibus);
3270 error = ifmedia_ioctl(ifp, ifr,
3271 &mii->mii_media, command);
3272 }
3273 break;
3274 case SIOCSIFCAP:
3275 mask = ifr->ifr_reqcap ^ ifp->if_capenable;
3276 if (mask & IFCAP_HWCSUM) {
3277 ifp->if_capenable ^= (mask & IFCAP_HWCSUM);
66deb1c1
SZ
3278 if (ifp->if_capenable & IFCAP_TXCSUM)
3279 ifp->if_hwassist |= BNX_CSUM_FEATURES;
6c8d8ecc 3280 else
66deb1c1
SZ
3281 ifp->if_hwassist &= ~BNX_CSUM_FEATURES;
3282 }
3283 if (mask & IFCAP_TSO) {
3284 ifp->if_capenable ^= (mask & IFCAP_TSO);
3285 if (ifp->if_capenable & IFCAP_TSO)
3286 ifp->if_hwassist |= CSUM_TSO;
3287 else
3288 ifp->if_hwassist &= ~CSUM_TSO;
6c8d8ecc
SZ
3289 }
3290 break;
3291 default:
3292 error = ether_ioctl(ifp, command, data);
3293 break;
3294 }
3295 return error;
3296}
3297
3298static void
3299bnx_watchdog(struct ifnet *ifp)
3300{
3301 struct bnx_softc *sc = ifp->if_softc;
3302
3303 if_printf(ifp, "watchdog timeout -- resetting\n");
3304
3305 bnx_init(sc);
3306
3307 ifp->if_oerrors++;
3308
3309 if (!ifq_is_empty(&ifp->if_snd))
3310 if_devstart(ifp);
3311}
3312
3313/*
3314 * Stop the adapter and free any mbufs allocated to the
3315 * RX and TX lists.
3316 */
3317static void
3318bnx_stop(struct bnx_softc *sc)
3319{
3320 struct ifnet *ifp = &sc->arpcom.ac_if;
3321
3322 ASSERT_SERIALIZED(ifp->if_serializer);
3323
3324 callout_stop(&sc->bnx_stat_timer);
3325
3326 /*
3327 * Disable all of the receiver blocks
3328 */
3329 bnx_stop_block(sc, BGE_RX_MODE, BGE_RXMODE_ENABLE);
3330 bnx_stop_block(sc, BGE_RBDI_MODE, BGE_RBDIMODE_ENABLE);
3331 bnx_stop_block(sc, BGE_RXLP_MODE, BGE_RXLPMODE_ENABLE);
3332 bnx_stop_block(sc, BGE_RDBDI_MODE, BGE_RBDIMODE_ENABLE);
3333 bnx_stop_block(sc, BGE_RDC_MODE, BGE_RDCMODE_ENABLE);
3334 bnx_stop_block(sc, BGE_RBDC_MODE, BGE_RBDCMODE_ENABLE);
3335
3336 /*
3337 * Disable all of the transmit blocks
3338 */
3339 bnx_stop_block(sc, BGE_SRS_MODE, BGE_SRSMODE_ENABLE);
3340 bnx_stop_block(sc, BGE_SBDI_MODE, BGE_SBDIMODE_ENABLE);
3341 bnx_stop_block(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE);
3342 bnx_stop_block(sc, BGE_RDMA_MODE, BGE_RDMAMODE_ENABLE);
3343 bnx_stop_block(sc, BGE_SDC_MODE, BGE_SDCMODE_ENABLE);
3344 bnx_stop_block(sc, BGE_SBDC_MODE, BGE_SBDCMODE_ENABLE);
3345
3346 /*
3347 * Shut down all of the memory managers and related
3348 * state machines.
3349 */
3350 bnx_stop_block(sc, BGE_HCC_MODE, BGE_HCCMODE_ENABLE);
3351 bnx_stop_block(sc, BGE_WDMA_MODE, BGE_WDMAMODE_ENABLE);
3352 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0xFFFFFFFF);
3353 CSR_WRITE_4(sc, BGE_FTQ_RESET, 0);
3354
3355 /* Disable host interrupts. */
3356 bnx_disable_intr(sc);
3357
3358 /*
3359 * Tell firmware we're shutting down.
3360 */
3361 BNX_CLRBIT(sc, BGE_MODE_CTL, BGE_MODECTL_STACKUP);
3362
3363 /* Free the RX lists. */
3364 bnx_free_rx_ring_std(sc);
3365
3366 /* Free jumbo RX list. */
3367 if (BNX_IS_JUMBO_CAPABLE(sc))
3368 bnx_free_rx_ring_jumbo(sc);
3369
3370 /* Free TX buffers. */
3371 bnx_free_tx_ring(sc);
3372
3373 sc->bnx_status_tag = 0;
3374 sc->bnx_link = 0;
3375 sc->bnx_coal_chg = 0;
3376
3377 sc->bnx_tx_saved_considx = BNX_TXCONS_UNSET;
3378
3379 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
3380 ifp->if_timer = 0;
3381}
3382
3383/*
3384 * Stop all chip I/O so that the kernel's probe routines don't
3385 * get confused by errant DMAs when rebooting.
3386 */
3387static void
3388bnx_shutdown(device_t dev)
3389{
3390 struct bnx_softc *sc = device_get_softc(dev);
3391 struct ifnet *ifp = &sc->arpcom.ac_if;
3392
3393 lwkt_serialize_enter(ifp->if_serializer);
3394 bnx_stop(sc);
3395 bnx_reset(sc);
3396 lwkt_serialize_exit(ifp->if_serializer);
3397}
3398
3399static int
3400bnx_suspend(device_t dev)
3401{
3402 struct bnx_softc *sc = device_get_softc(dev);
3403 struct ifnet *ifp = &sc->arpcom.ac_if;
3404
3405 lwkt_serialize_enter(ifp->if_serializer);
3406 bnx_stop(sc);
3407 lwkt_serialize_exit(ifp->if_serializer);
3408
3409 return 0;
3410}
3411
3412static int
3413bnx_resume(device_t dev)
3414{
3415 struct bnx_softc *sc = device_get_softc(dev);
3416 struct ifnet *ifp = &sc->arpcom.ac_if;
3417
3418 lwkt_serialize_enter(ifp->if_serializer);
3419
3420 if (ifp->if_flags & IFF_UP) {
3421 bnx_init(sc);
3422
3423 if (!ifq_is_empty(&ifp->if_snd))
3424 if_devstart(ifp);
3425 }
3426
3427 lwkt_serialize_exit(ifp->if_serializer);
3428
3429 return 0;
3430}
3431
3432static void
3433bnx_setpromisc(struct bnx_softc *sc)
3434{
3435 struct ifnet *ifp = &sc->arpcom.ac_if;
3436
3437 if (ifp->if_flags & IFF_PROMISC)
3438 BNX_SETBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC);
3439 else
3440 BNX_CLRBIT(sc, BGE_RX_MODE, BGE_RXMODE_RX_PROMISC);
3441}
3442
3443static void
3444bnx_dma_free(struct bnx_softc *sc)
3445{
3446 int i;
3447
3448 /* Destroy RX mbuf DMA stuffs. */
3449 if (sc->bnx_cdata.bnx_rx_mtag != NULL) {
3450 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) {
3451 bus_dmamap_destroy(sc->bnx_cdata.bnx_rx_mtag,
3452 sc->bnx_cdata.bnx_rx_std_dmamap[i]);
3453 }
3454 bus_dmamap_destroy(sc->bnx_cdata.bnx_rx_mtag,
3455 sc->bnx_cdata.bnx_rx_tmpmap);
3456 bus_dma_tag_destroy(sc->bnx_cdata.bnx_rx_mtag);
3457 }
3458
3459 /* Destroy TX mbuf DMA stuffs. */
3460 if (sc->bnx_cdata.bnx_tx_mtag != NULL) {
3461 for (i = 0; i < BGE_TX_RING_CNT; i++) {
3462 bus_dmamap_destroy(sc->bnx_cdata.bnx_tx_mtag,
3463 sc->bnx_cdata.bnx_tx_dmamap[i]);
3464 }
3465 bus_dma_tag_destroy(sc->bnx_cdata.bnx_tx_mtag);
3466 }
3467
3468 /* Destroy standard RX ring */
3469 bnx_dma_block_free(sc->bnx_cdata.bnx_rx_std_ring_tag,
3470 sc->bnx_cdata.bnx_rx_std_ring_map,
3471 sc->bnx_ldata.bnx_rx_std_ring);
3472
3473 if (BNX_IS_JUMBO_CAPABLE(sc))
3474 bnx_free_jumbo_mem(sc);
3475
3476 /* Destroy RX return ring */
3477 bnx_dma_block_free(sc->bnx_cdata.bnx_rx_return_ring_tag,
3478 sc->bnx_cdata.bnx_rx_return_ring_map,
3479 sc->bnx_ldata.bnx_rx_return_ring);
3480
3481 /* Destroy TX ring */
3482 bnx_dma_block_free(sc->bnx_cdata.bnx_tx_ring_tag,
3483 sc->bnx_cdata.bnx_tx_ring_map,
3484 sc->bnx_ldata.bnx_tx_ring);
3485
3486 /* Destroy status block */
3487 bnx_dma_block_free(sc->bnx_cdata.bnx_status_tag,
3488 sc->bnx_cdata.bnx_status_map,
3489 sc->bnx_ldata.bnx_status_block);
3490
3491 /* Destroy the parent tag */
3492 if (sc->bnx_cdata.bnx_parent_tag != NULL)
3493 bus_dma_tag_destroy(sc->bnx_cdata.bnx_parent_tag);
3494}
3495
3496static int
3497bnx_dma_alloc(struct bnx_softc *sc)
3498{
3499 struct ifnet *ifp = &sc->arpcom.ac_if;
66deb1c1 3500 bus_size_t txmaxsz;
6c8d8ecc
SZ
3501 int i, error;
3502
3503 /*
3504 * Allocate the parent bus DMA tag appropriate for PCI.
3505 *
3506 * All of the NetExtreme/NetLink controllers have 4GB boundary
3507 * DMA bug.
3508 * Whenever an address crosses a multiple of the 4GB boundary
3509 * (including 4GB, 8Gb, 12Gb, etc.) and makes the transition
3510 * from 0xX_FFFF_FFFF to 0x(X+1)_0000_0000 an internal DMA
3511 * state machine will lockup and cause the device to hang.
3512 */
3513 error = bus_dma_tag_create(NULL, 1, BGE_DMA_BOUNDARY_4G,
3514 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
3515 NULL, NULL,
3516 BUS_SPACE_MAXSIZE_32BIT, 0,
3517 BUS_SPACE_MAXSIZE_32BIT,
3518 0, &sc->bnx_cdata.bnx_parent_tag);
3519 if (error) {
3520 if_printf(ifp, "could not allocate parent dma tag\n");
3521 return error;
3522 }
3523
3524 /*
3525 * Create DMA tag and maps for RX mbufs.
3526 */
3527 error = bus_dma_tag_create(sc->bnx_cdata.bnx_parent_tag, 1, 0,
3528 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
3529 NULL, NULL, MCLBYTES, 1, MCLBYTES,
3530 BUS_DMA_ALLOCNOW | BUS_DMA_WAITOK,
3531 &sc->bnx_cdata.bnx_rx_mtag);
3532 if (error) {
3533 if_printf(ifp, "could not allocate RX mbuf dma tag\n");
3534 return error;
3535 }
3536
3537 error = bus_dmamap_create(sc->bnx_cdata.bnx_rx_mtag,
3538 BUS_DMA_WAITOK, &sc->bnx_cdata.bnx_rx_tmpmap);
3539 if (error) {
3540 bus_dma_tag_destroy(sc->bnx_cdata.bnx_rx_mtag);
3541 sc->bnx_cdata.bnx_rx_mtag = NULL;
3542 return error;
3543 }
3544
3545 for (i = 0; i < BGE_STD_RX_RING_CNT; i++) {
3546 error = bus_dmamap_create(sc->bnx_cdata.bnx_rx_mtag,
3547 BUS_DMA_WAITOK,
3548 &sc->bnx_cdata.bnx_rx_std_dmamap[i]);
3549 if (error) {
3550 int j;
3551
3552 for (j = 0; j < i; ++j) {
3553 bus_dmamap_destroy(sc->bnx_cdata.bnx_rx_mtag,
3554 sc->bnx_cdata.bnx_rx_std_dmamap[j]);
3555 }
3556 bus_dma_tag_destroy(sc->bnx_cdata.bnx_rx_mtag);
3557 sc->bnx_cdata.bnx_rx_mtag = NULL;
3558
3559 if_printf(ifp, "could not create DMA map for RX\n");
3560 return error;
3561 }
3562 }
3563
3564 /*
3565 * Create DMA tag and maps for TX mbufs.
3566 */
66deb1c1
SZ
3567 if (sc->bnx_flags & BNX_FLAG_TSO)
3568 txmaxsz = IP_MAXPACKET + sizeof(struct ether_vlan_header);
3569 else
3570 txmaxsz = BNX_JUMBO_FRAMELEN;
6c8d8ecc
SZ
3571 error = bus_dma_tag_create(sc->bnx_cdata.bnx_parent_tag, 1, 0,
3572 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
3573 NULL, NULL,
66deb1c1 3574 txmaxsz, BNX_NSEG_NEW, PAGE_SIZE,
6c8d8ecc
SZ
3575 BUS_DMA_ALLOCNOW | BUS_DMA_WAITOK |
3576 BUS_DMA_ONEBPAGE,
3577 &sc->bnx_cdata.bnx_tx_mtag);
3578 if (error) {
3579 if_printf(ifp, "could not allocate TX mbuf dma tag\n");
3580 return error;
3581 }
3582
3583 for (i = 0; i < BGE_TX_RING_CNT; i++) {
3584 error = bus_dmamap_create(sc->bnx_cdata.bnx_tx_mtag,
3585 BUS_DMA_WAITOK | BUS_DMA_ONEBPAGE,
3586 &sc->bnx_cdata.bnx_tx_dmamap[i]);
3587 if (error) {
3588 int j;
3589
3590 for (j = 0; j < i; ++j) {
3591 bus_dmamap_destroy(sc->bnx_cdata.bnx_tx_mtag,
3592 sc->bnx_cdata.bnx_tx_dmamap[j]);
3593 }
3594 bus_dma_tag_destroy(sc->bnx_cdata.bnx_tx_mtag);
3595 sc->bnx_cdata.bnx_tx_mtag = NULL;
3596
3597 if_printf(ifp, "could not create DMA map for TX\n");
3598 return error;
3599 }
3600 }
3601
3602 /*
3603 * Create DMA stuffs for standard RX ring.
3604 */
3605 error = bnx_dma_block_alloc(sc, BGE_STD_RX_RING_SZ,
3606 &sc->bnx_cdata.bnx_rx_std_ring_tag,
3607 &sc->bnx_cdata.bnx_rx_std_ring_map,
3608 (void *)&sc->bnx_ldata.bnx_rx_std_ring,
3609 &sc->bnx_ldata.bnx_rx_std_ring_paddr);
3610 if (error) {
3611 if_printf(ifp, "could not create std RX ring\n");
3612 return error;
3613 }
3614
3615 /*
3616 * Create jumbo buffer pool.
3617 */
3618 if (BNX_IS_JUMBO_CAPABLE(sc)) {
3619 error = bnx_alloc_jumbo_mem(sc);
3620 if (error) {
3621 if_printf(ifp, "could not create jumbo buffer pool\n");
3622 return error;
3623 }
3624 }
3625
3626 /*
3627 * Create DMA stuffs for RX return ring.
3628 */
3629 error = bnx_dma_block_alloc(sc,
3630 BGE_RX_RTN_RING_SZ(sc->bnx_return_ring_cnt),
3631 &sc->bnx_cdata.bnx_rx_return_ring_tag,
3632 &sc->bnx_cdata.bnx_rx_return_ring_map,
3633 (void *)&sc->bnx_ldata.bnx_rx_return_ring,
3634 &sc->bnx_ldata.bnx_rx_return_ring_paddr);
3635 if (error) {
3636 if_printf(ifp, "could not create RX ret ring\n");
3637 return error;
3638 }
3639
3640 /*
3641 * Create DMA stuffs for TX ring.
3642 */
3643 error = bnx_dma_block_alloc(sc, BGE_TX_RING_SZ,
3644 &sc->bnx_cdata.bnx_tx_ring_tag,
3645 &sc->bnx_cdata.bnx_tx_ring_map,
3646 (void *)&sc->bnx_ldata.bnx_tx_ring,
3647 &sc->bnx_ldata.bnx_tx_ring_paddr);
3648 if (error) {
3649 if_printf(ifp, "could not create TX ring\n");
3650 return error;
3651 }
3652
3653 /*
3654 * Create DMA stuffs for status block.
3655 */
3656 error = bnx_dma_block_alloc(sc, BGE_STATUS_BLK_SZ,
3657 &sc->bnx_cdata.bnx_status_tag,
3658 &sc->bnx_cdata.bnx_status_map,
3659 (void *)&sc->bnx_ldata.bnx_status_block,
3660 &sc->bnx_ldata.bnx_status_block_paddr);
3661 if (error) {
3662 if_printf(ifp, "could not create status block\n");
3663 return error;
3664 }
3665
3666 return 0;
3667}
3668
3669static int
3670bnx_dma_block_alloc(struct bnx_softc *sc, bus_size_t size, bus_dma_tag_t *tag,
3671 bus_dmamap_t *map, void **addr, bus_addr_t *paddr)
3672{
3673 bus_dmamem_t dmem;
3674 int error;
3675
3676 error = bus_dmamem_coherent(sc->bnx_cdata.bnx_parent_tag, PAGE_SIZE, 0,
3677 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
3678 size, BUS_DMA_WAITOK | BUS_DMA_ZERO, &dmem);
3679 if (error)
3680 return error;
3681
3682 *tag = dmem.dmem_tag;
3683 *map = dmem.dmem_map;
3684 *addr = dmem.dmem_addr;
3685 *paddr = dmem.dmem_busaddr;
3686
3687 return 0;
3688}
3689
3690static void
3691bnx_dma_block_free(bus_dma_tag_t tag, bus_dmamap_t map, void *addr)
3692{
3693 if (tag != NULL) {
3694 bus_dmamap_unload(tag, map);
3695 bus_dmamem_free(tag, addr, map);
3696 bus_dma_tag_destroy(tag);
3697 }
3698}
3699
3700static void
3701bnx_tbi_link_upd(struct bnx_softc *sc, uint32_t status)
3702{
3703 struct ifnet *ifp = &sc->arpcom.ac_if;
3704
3705#define PCS_ENCODE_ERR (BGE_MACSTAT_PORT_DECODE_ERROR|BGE_MACSTAT_MI_COMPLETE)
3706
3707 /*
3708 * Sometimes PCS encoding errors are detected in
3709 * TBI mode (on fiber NICs), and for some reason
3710 * the chip will signal them as link changes.
3711 * If we get a link change event, but the 'PCS
3712 * encoding error' bit in the MAC status register
3713 * is set, don't bother doing a link check.
3714 * This avoids spurious "gigabit link up" messages
3715 * that sometimes appear on fiber NICs during
3716 * periods of heavy traffic.
3717 */
3718 if (status & BGE_MACSTAT_TBI_PCS_SYNCHED) {
3719 if (!sc->bnx_link) {
3720 sc->bnx_link++;
3721 if (sc->bnx_asicrev == BGE_ASICREV_BCM5704) {
3722 BNX_CLRBIT(sc, BGE_MAC_MODE,
3723 BGE_MACMODE_TBI_SEND_CFGS);
3724 }
3725 CSR_WRITE_4(sc, BGE_MAC_STS, 0xFFFFFFFF);
3726
3727 if (bootverbose)
3728 if_printf(ifp, "link UP\n");
3729
3730 ifp->if_link_state = LINK_STATE_UP;
3731 if_link_state_change(ifp);
3732 }
3733 } else if ((status & PCS_ENCODE_ERR) != PCS_ENCODE_ERR) {
3734 if (sc->bnx_link) {
3735 sc->bnx_link = 0;
3736
3737 if (bootverbose)
3738 if_printf(ifp, "link DOWN\n");
3739
3740 ifp->if_link_state = LINK_STATE_DOWN;
3741 if_link_state_change(ifp);
3742 }
3743 }
3744
3745#undef PCS_ENCODE_ERR
3746
3747 /* Clear the attention. */
3748 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED |
3749 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE |
3750 BGE_MACSTAT_LINK_CHANGED);
3751}
3752
3753static void
3754bnx_copper_link_upd(struct bnx_softc *sc, uint32_t status __unused)
3755{
3756 struct ifnet *ifp = &sc->arpcom.ac_if;
3757 struct mii_data *mii = device_get_softc(sc->bnx_miibus);
3758
3759 mii_pollstat(mii);
3760 bnx_miibus_statchg(sc->bnx_dev);
3761
3762 if (bootverbose) {
3763 if (sc->bnx_link)
3764 if_printf(ifp, "link UP\n");
3765 else
3766 if_printf(ifp, "link DOWN\n");
3767 }
3768
3769 /* Clear the attention. */
3770 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED |
3771 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE |
3772 BGE_MACSTAT_LINK_CHANGED);
3773}
3774
3775static void
3776bnx_autopoll_link_upd(struct bnx_softc *sc, uint32_t status __unused)
3777{
3778 struct ifnet *ifp = &sc->arpcom.ac_if;
3779 struct mii_data *mii = device_get_softc(sc->bnx_miibus);
3780
3781 mii_pollstat(mii);
3782
3783 if (!sc->bnx_link &&
3784 (mii->mii_media_status & IFM_ACTIVE) &&
3785 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
3786 sc->bnx_link++;
3787 if (bootverbose)
3788 if_printf(ifp, "link UP\n");
3789 } else if (sc->bnx_link &&
3790 (!(mii->mii_media_status & IFM_ACTIVE) ||
3791 IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE)) {
3792 sc->bnx_link = 0;
3793 if (bootverbose)
3794 if_printf(ifp, "link DOWN\n");
3795 }
3796
3797 /* Clear the attention. */
3798 CSR_WRITE_4(sc, BGE_MAC_STS, BGE_MACSTAT_SYNC_CHANGED |
3799 BGE_MACSTAT_CFG_CHANGED | BGE_MACSTAT_MI_COMPLETE |
3800 BGE_MACSTAT_LINK_CHANGED);
3801}
3802
3803static int
3804bnx_sysctl_rx_coal_ticks(SYSCTL_HANDLER_ARGS)
3805{
3806 struct bnx_softc *sc = arg1;
3807
3808 return bnx_sysctl_coal_chg(oidp, arg1, arg2, req,
3809 &sc->bnx_rx_coal_ticks,
3810 BNX_RX_COAL_TICKS_MIN, BNX_RX_COAL_TICKS_MAX,
3811 BNX_RX_COAL_TICKS_CHG);
3812}
3813
3814static int
3815bnx_sysctl_tx_coal_ticks(SYSCTL_HANDLER_ARGS)
3816{
3817 struct bnx_softc *sc = arg1;
3818
3819 return bnx_sysctl_coal_chg(oidp, arg1, arg2, req,
3820 &sc->bnx_tx_coal_ticks,
3821 BNX_TX_COAL_TICKS_MIN, BNX_TX_COAL_TICKS_MAX,
3822 BNX_TX_COAL_TICKS_CHG);
3823}
3824
3825static int
3826bnx_sysctl_rx_coal_bds(SYSCTL_HANDLER_ARGS)
3827{
3828 struct bnx_softc *sc = arg1;
3829
3830 return bnx_sysctl_coal_chg(oidp, arg1, arg2, req,
3831 &sc->bnx_rx_coal_bds,
3832 BNX_RX_COAL_BDS_MIN, BNX_RX_COAL_BDS_MAX,
3833 BNX_RX_COAL_BDS_CHG);
3834}
3835
3836static int
3837bnx_sysctl_tx_coal_bds(SYSCTL_HANDLER_ARGS)
3838{
3839 struct bnx_softc *sc = arg1;
3840
3841 return bnx_sysctl_coal_chg(oidp, arg1, arg2, req,
3842 &sc->bnx_tx_coal_bds,
3843 BNX_TX_COAL_BDS_MIN, BNX_TX_COAL_BDS_MAX,
3844 BNX_TX_COAL_BDS_CHG);
3845}
3846
3847static int
3848bnx_sysctl_rx_coal_bds_int(SYSCTL_HANDLER_ARGS)
3849{
3850 struct bnx_softc *sc = arg1;
3851
3852 return bnx_sysctl_coal_chg(oidp, arg1, arg2, req,
3853 &sc->bnx_rx_coal_bds_int,
3854 BNX_RX_COAL_BDS_MIN, BNX_RX_COAL_BDS_MAX,
3855 BNX_RX_COAL_BDS_INT_CHG);
3856}
3857
3858static int
3859bnx_sysctl_tx_coal_bds_int(SYSCTL_HANDLER_ARGS)
3860{
3861 struct bnx_softc *sc = arg1;
3862
3863 return bnx_sysctl_coal_chg(oidp, arg1, arg2, req,
3864 &sc->bnx_tx_coal_bds_int,
3865 BNX_TX_COAL_BDS_MIN, BNX_TX_COAL_BDS_MAX,
3866 BNX_TX_COAL_BDS_INT_CHG);
3867}
3868
3869static int
3870bnx_sysctl_coal_chg(SYSCTL_HANDLER_ARGS, uint32_t *coal,
3871 int coal_min, int coal_max, uint32_t coal_chg_mask)
3872{
3873 struct bnx_softc *sc = arg1;
3874 struct ifnet *ifp = &sc->arpcom.ac_if;
3875 int error = 0, v;
3876
3877 lwkt_serialize_enter(ifp->if_serializer);
3878
3879 v = *coal;
3880 error = sysctl_handle_int(oidp, &v, 0, req);
3881 if (!error && req->newptr != NULL) {
3882 if (v < coal_min || v > coal_max) {
3883 error = EINVAL;
3884 } else {
3885 *coal = v;
3886 sc->bnx_coal_chg |= coal_chg_mask;
3887 }
3888 }
3889
3890 lwkt_serialize_exit(ifp->if_serializer);
3891 return error;
3892}
3893
3894static void
3895bnx_coal_change(struct bnx_softc *sc)
3896{
3897 struct ifnet *ifp = &sc->arpcom.ac_if;
3898 uint32_t val;
3899
3900 ASSERT_SERIALIZED(ifp->if_serializer);
3901
3902 if (sc->bnx_coal_chg & BNX_RX_COAL_TICKS_CHG) {
3903 CSR_WRITE_4(sc, BGE_HCC_RX_COAL_TICKS,
3904 sc->bnx_rx_coal_ticks);
3905 DELAY(10);
3906 val = CSR_READ_4(sc, BGE_HCC_RX_COAL_TICKS);
3907
3908 if (bootverbose) {
3909 if_printf(ifp, "rx_coal_ticks -> %u\n",
3910 sc->bnx_rx_coal_ticks);
3911 }
3912 }
3913
3914 if (sc->bnx_coal_chg & BNX_TX_COAL_TICKS_CHG) {
3915 CSR_WRITE_4(sc, BGE_HCC_TX_COAL_TICKS,
3916 sc->bnx_tx_coal_ticks);
3917 DELAY(10);
3918 val = CSR_READ_4(sc, BGE_HCC_TX_COAL_TICKS);
3919
3920 if (bootverbose) {
3921 if_printf(ifp, "tx_coal_ticks -> %u\n",
3922 sc->bnx_tx_coal_ticks);
3923 }
3924 }
3925
3926 if (sc->bnx_coal_chg & BNX_RX_COAL_BDS_CHG) {
3927 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS,
3928 sc->bnx_rx_coal_bds);
3929 DELAY(10);
3930 val = CSR_READ_4(sc, BGE_HCC_RX_MAX_COAL_BDS);
3931
3932 if (bootverbose) {
3933 if_printf(ifp, "rx_coal_bds -> %u\n",
3934 sc->bnx_rx_coal_bds);
3935 }
3936 }
3937
3938 if (sc->bnx_coal_chg & BNX_TX_COAL_BDS_CHG) {
3939 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS,
3940 sc->bnx_tx_coal_bds);
3941 DELAY(10);
3942 val = CSR_READ_4(sc, BGE_HCC_TX_MAX_COAL_BDS);
3943
3944 if (bootverbose) {
cc98a7c2 3945 if_printf(ifp, "tx_coal_bds -> %u\n",
6c8d8ecc
SZ
3946 sc->bnx_tx_coal_bds);
3947 }
3948 }
3949
3950 if (sc->bnx_coal_chg & BNX_RX_COAL_BDS_INT_CHG) {
3951 CSR_WRITE_4(sc, BGE_HCC_RX_MAX_COAL_BDS_INT,
3952 sc->bnx_rx_coal_bds_int);
3953 DELAY(10);
3954 val = CSR_READ_4(sc, BGE_HCC_RX_MAX_COAL_BDS_INT);
3955
3956 if (bootverbose) {
3957 if_printf(ifp, "rx_coal_bds_int -> %u\n",
3958 sc->bnx_rx_coal_bds_int);
3959 }
3960 }
3961
3962 if (sc->bnx_coal_chg & BNX_TX_COAL_BDS_INT_CHG) {
3963 CSR_WRITE_4(sc, BGE_HCC_TX_MAX_COAL_BDS_INT,
3964 sc->bnx_tx_coal_bds_int);
3965 DELAY(10);
3966 val = CSR_READ_4(sc, BGE_HCC_TX_MAX_COAL_BDS_INT);
3967
3968 if (bootverbose) {
3969 if_printf(ifp, "tx_coal_bds_int -> %u\n",
3970 sc->bnx_tx_coal_bds_int);
3971 }
3972 }
3973
3974 sc->bnx_coal_chg = 0;
3975}
3976
3977static void
df9ccc98
SZ
3978bnx_intr_check(void *xsc)
3979{
3980 struct bnx_softc *sc = xsc;
3981 struct ifnet *ifp = &sc->arpcom.ac_if;
3982 struct bge_status_block *sblk = sc->bnx_ldata.bnx_status_block;
3983
3984 lwkt_serialize_enter(ifp->if_serializer);
3985
3986 KKASSERT(mycpuid == sc->bnx_intr_cpuid);
3987
3988 if ((ifp->if_flags & (IFF_RUNNING | IFF_POLLING)) != IFF_RUNNING) {
3989 lwkt_serialize_exit(ifp->if_serializer);
3990 return;
3991 }
3992
3993 if (sblk->bge_idx[0].bge_rx_prod_idx != sc->bnx_rx_saved_considx ||
3994 sblk->bge_idx[0].bge_tx_cons_idx != sc->bnx_tx_saved_considx) {
3995 if (sc->bnx_rx_check_considx == sc->bnx_rx_saved_considx &&
3996 sc->bnx_tx_check_considx == sc->bnx_tx_saved_considx) {
3997 if (!sc->bnx_intr_maylose) {
3998 sc->bnx_intr_maylose = TRUE;
3999 goto done;
4000 }
4001 if (bootverbose)
4002 if_printf(ifp, "lost interrupt\n");
4003 bnx_msi(sc);
4004 }
4005 }
4006 sc->bnx_intr_maylose = FALSE;
4007 sc->bnx_rx_check_considx = sc->bnx_rx_saved_considx;
4008 sc->bnx_tx_check_considx = sc->bnx_tx_saved_considx;
4009
4010done:
4011 callout_reset(&sc->bnx_intr_timer, BNX_INTR_CKINTVL,
4012 bnx_intr_check, sc);
4013 lwkt_serialize_exit(ifp->if_serializer);
4014}
4015
4016static void
6c8d8ecc
SZ
4017bnx_enable_intr(struct bnx_softc *sc)
4018{
4019 struct ifnet *ifp = &sc->arpcom.ac_if;
4020
4021 lwkt_serialize_handler_enable(ifp->if_serializer);
4022
4023 /*
4024 * Enable interrupt.
4025 */
4026 bnx_writembx(sc, BGE_MBX_IRQ0_LO, sc->bnx_status_tag << 24);
4027 if (sc->bnx_flags & BNX_FLAG_ONESHOT_MSI) {
4028 /* XXX Linux driver */
4029 bnx_writembx(sc, BGE_MBX_IRQ0_LO, sc->bnx_status_tag << 24);
4030 }
4031
4032 /*
4033 * Unmask the interrupt when we stop polling.
4034 */
4035 PCI_CLRBIT(sc->bnx_dev, BGE_PCI_MISC_CTL,
4036 BGE_PCIMISCCTL_MASK_PCI_INTR, 4);
4037
4038 /*
4039 * Trigger another interrupt, since above writing
4040 * to interrupt mailbox0 may acknowledge pending
4041 * interrupt.
4042 */
4043 BNX_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET);
df9ccc98
SZ
4044
4045 if (sc->bnx_flags & BNX_FLAG_STATUSTAG_BUG) {
4046 sc->bnx_intr_maylose = FALSE;
4047 sc->bnx_rx_check_considx = 0;
4048 sc->bnx_tx_check_considx = 0;
4049
4050 if (bootverbose)
4051 if_printf(ifp, "status tag bug workaround\n");
4052
4053 /* 10ms check interval */
4054 callout_reset_bycpu(&sc->bnx_intr_timer, BNX_INTR_CKINTVL,
4055 bnx_intr_check, sc, sc->bnx_intr_cpuid);
4056 }
6c8d8ecc
SZ
4057}
4058
4059static void
4060bnx_disable_intr(struct bnx_softc *sc)
4061{
4062 struct ifnet *ifp = &sc->arpcom.ac_if;
4063
4064 /*
4065 * Mask the interrupt when we start polling.
4066 */
4067 PCI_SETBIT(sc->bnx_dev, BGE_PCI_MISC_CTL,
4068 BGE_PCIMISCCTL_MASK_PCI_INTR, 4);
4069
4070 /*
4071 * Acknowledge possible asserted interrupt.
4072 */
4073 bnx_writembx(sc, BGE_MBX_IRQ0_LO, 1);
4074
df9ccc98
SZ
4075 callout_stop(&sc->bnx_intr_timer);
4076 sc->bnx_intr_maylose = FALSE;
4077 sc->bnx_rx_check_considx = 0;
4078 sc->bnx_tx_check_considx = 0;
4079