Although our linker supports pie, our elf loader doesn't.
[dragonfly.git] / sys / config / GENERIC
CommitLineData
984263bc 1#
8611e04d 2# GENERIC -- Generic kernel configuration file for DragonFly/i386
984263bc 3#
23e12d00 4# Check the LINT configuration file in sys/config, for an
43800c56 5# exhaustive list of options.
984263bc 6#
0dba45fe 7# $DragonFly: src/sys/config/GENERIC,v 1.49 2007/04/01 13:59:41 sephe Exp $
984263bc 8
0955fd91
MD
9platform pc32
10machine i386
a9295349 11machine_arch i386
984263bc
MD
12cpu I386_CPU
13cpu I486_CPU
14cpu I586_CPU
15cpu I686_CPU
16ident GENERIC
17maxusers 0
18
1037a9ff 19makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
984263bc
MD
20
21options MATH_EMULATE #Support for x87 emulation
22options INET #InterNETworking
23options INET6 #IPv6 communications protocols
24options FFS #Berkeley Fast Filesystem
25options FFS_ROOT #FFS usable as root device [keep this!]
26options SOFTUPDATES #Enable FFS soft updates support
27options UFS_DIRHASH #Improve performance on big directories
28options MFS #Memory Filesystem
29options MD_ROOT #MD is a potential root device
30options NFS #Network Filesystem
31options NFS_ROOT #NFS usable as root device, NFS required
32options MSDOSFS #MSDOS Filesystem
33options CD9660 #ISO 9660 Filesystem
984263bc
MD
34options PROCFS #Process filesystem
35options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
db37e804 36options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
dd5596d6 37options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
fe091cd0
SZ
38options DEVICE_POLLING # Support mixed interrupt-polling
39 # handling of network device drivers
984263bc
MD
40options UCONSOLE #Allow users to grab the console
41options USERCONFIG #boot -c editor
42options VISUAL_USERCONFIG #visual boot -c editor
43options KTRACE #ktrace(1) support
44options SYSVSHM #SYSV-style shared memory
45options SYSVMSG #SYSV-style message queues
46options SYSVSEM #SYSV-style semaphores
47options P1003_1B #Posix P1003_1B real-time extensions
48options _KPOSIX_PRIORITY_SCHEDULING
49options ICMP_BANDLIM #Rate limit bad replies
50options KBD_INSTALL_CDEV # install a CDEV entry in /dev
51options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
52 # output. Adds ~128k to driver.
54ca5b45 53options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
984263bc
MD
54 # output. Adds ~215k to driver.
55
97359a5b
MD
56# To make an SMP kernel both SMP and APIC_IO are usually
57# specified. SMP boxes with severely broken BIOSes which
58# boot fine for non-SMP builds *might* work in SMP mode
59# if you define SMP and leave APIC_IO turned off.
60#
984263bc
MD
61#options SMP # Symmetric MultiProcessor Kernel
62#options APIC_IO # Symmetric (APIC) I/O
63
1037a9ff 64# Debugging for Development
78990d4c 65options DDB
863c2f64 66options DDB_TRACE
78990d4c 67options INVARIANTS
1037a9ff 68
54ca5b45
TS
69# ACPI options
70#options ACPI_QUIRK_VMWARE # VMware's ACPI-fast24 timer is broken
1037a9ff 71
984263bc
MD
72device isa
73device eisa
74device pci
75
76# Floppy drives
77device fdc0 at isa? port IO_FD1 irq 6 drq 2
78device fd0 at fdc0 drive 0
79device fd1 at fdc0 drive 1
80#
81# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
82# don't use the above line for fdc0 but the following one:
83#device fdc0
84
85# ATA and ATAPI devices
86device ata0 at isa? port IO_WD1 irq 14
87device ata1 at isa? port IO_WD2 irq 15
88device ata
89device atadisk # ATA disk drives
90device atapicd # ATAPI CDROM drives
91device atapifd # ATAPI floppy drives
92device atapist # ATAPI tape drives
a3e4c692 93device atapicam # Emulate ATAPI devices as SCSI via CAM
984263bc
MD
94options ATA_STATIC_ID #Static device numbering
95
96# SCSI Controllers
97device ahb # EISA AHA1742 family
98device ahc # AHA2940 and onboard AIC7xxx devices
99device ahd # AHA39320/29320 and onboard AIC79xx devices
100device amd # AMD 53C974 (Tekram DC-390(T))
101device isp # Qlogic family
102device mpt # LSI-Logic MPT/Fusion
103device ncr # NCR/Symbios Logic
104device sym # NCR/Symbios Logic (newer chipsets)
105options SYM_SETUP_LP_PROBE_MAP=0x40
106 # Allow ncr to attach legacy NCR devices when
107 # both sym and ncr are configured
108
109device adv0 at isa?
110device adw
111device bt0 at isa?
112device aha0 at isa?
113device aic0 at isa?
114
115device ncv # NCR 53C500
116device nsp # Workbit Ninja SCSI-3
117device stg # TMC 18C30/18C50
118
119# SCSI peripherals
120device scbus # SCSI bus (required)
121device da # Direct Access (disks)
122device sa # Sequential Access (tape etc)
123device cd # CD
124device pass # Passthrough device (direct SCSI access)
125
126# RAID controllers interfaced to the SCSI subsystem
127device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
128device dpt # DPT Smartcache - See LINT for options!
129device iir # Intel Integrated RAID
130device mly # Mylex AcceleRAID/eXtremeRAID
131device ciss # Compaq SmartRAID 5* series
132
133# RAID controllers
134device aac # Adaptec FSA RAID, Dell PERC2/PERC3
135#device aacp # SCSI passthrough for aac (requires CAM)
136device ida # Compaq Smart RAID
3b191904 137device ips # IBM ServeRAID
984263bc
MD
138device amr # AMI MegaRAID
139device mlx # Mylex DAC960 family
2d0f6098 140device twe # 3ware Escalade 7000/8000's
ab443496 141device twa # 3ware Escalade 9000's
b7ebf86e 142device pst # Promise Supertrack
984263bc
MD
143
144# atkbdc0 controls both the keyboard and the PS/2 mouse
145device atkbdc0 at isa? port IO_KBD
146device atkbd0 at atkbdc? irq 1 flags 0x1
147device psm0 at atkbdc? irq 12
148
149device vga0 at isa?
150
151# splash screen/screen saver
152pseudo-device splash
153
154# syscons is the default console driver, resembling an SCO console
155device sc0 at isa? flags 0x100
c42bc832 156options SC_PIXEL_MODE # add support for the raster text mode
984263bc 157
984263bc
MD
158device agp # support several AGP chipsets
159
160# Floating point support - do not disable.
161device npx0 at nexus? port IO_NPX irq 13
162
163# Power management support (see LINT for more options)
164device apm0 at nexus? disable flags 0x20 # Advanced Power Management
165
166# PCCARD (PCMCIA) support
666d2603
JS
167device pccard
168device cardbus
169device cbb
984263bc
MD
170
171# Serial (COM) ports
172device sio0 at isa? port IO_COM1 flags 0x10 irq 4
173device sio1 at isa? port IO_COM2 irq 3
174device sio2 at isa? disable port IO_COM3 irq 5
175device sio3 at isa? disable port IO_COM4 irq 9
176
177# Parallel port
178device ppc0 at isa? irq 7
179device ppbus # Parallel port bus (required)
180device lpt # Printer
181device plip # TCP/IP over parallel
182device ppi # Parallel port interface device
183#device vpo # Requires scbus and da
184
185
186# PCI Ethernet NICs.
187device de # DEC/Intel DC21x4x (``Tulip'')
188device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
189device txp # 3Com 3cR990 (``Typhoon'')
190device vx # 3Com 3c590, 3c595 (``Vortex'')
191
192# PCI Ethernet NICs that use the common MII bus controller code.
193# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
194device miibus # MII bus support
7f186839 195device bfe # Broadcom BCM440x 10/100 Ethernet
984263bc
MD
196device dc # DEC/Intel 21143 and various workalikes
197device fxp # Intel EtherExpress PRO/100B (82557, 82558)
198device pcn # AMD Am79C97x PCI 10/100 NICs
199device rl # RealTek 8129/8139
3e201bae 200device re # RealTek 8139C+/8169
984263bc
MD
201device sf # Adaptec AIC-6915 (``Starfire'')
202device sis # Silicon Integrated Systems SiS 900/SiS 7016
0db5ca13 203device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
984263bc
MD
204device ste # Sundance ST201 (D-Link DFE-550TX)
205device tl # Texas Instruments ThunderLAN
206device tx # SMC EtherPower II (83c170 ``EPIC'')
13bca4c6 207device vge # VIA 612x GigE
984263bc
MD
208device vr # VIA Rhine, Rhine II
209device wb # Winbond W89C840F
210device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
211device bge # Broadcom BCM570x (``Tigon III'')
1da2c9db 212device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
984263bc
MD
213
214# ISA Ethernet NICs.
215# 'device ed' requires 'device miibus'
216device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
217device ex
218device ep
219device fe0 at isa? disable port 0x300
220# Xircom Ethernet
221device xe
841ab66c
SZ
222
223# Wireless NIC cards
224device wlan # 802.11 support
225device wlan_ccmp # 802.11 CCMP support
226device wlan_tkip # 802.11 TKIP support
227device wlan_wep # 802.11 WEP support
428b19ed
SZ
228# 802.11 TX rate control algorithms
229#device wlan_ratectl_amrr # AMRR
230device wlan_ratectl_onoe # Onoe
0dba45fe 231device wlan_ratectl_sample # Sample
ac6da0a9 232
841ab66c 233# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
984263bc
MD
234# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
235# mode (the factory default). If you set the switches on your ISA
236# card for a manually chosen I/O address and IRQ, you must specify
237# those parameters here.
238device an
45e7728a 239device awi # PRISM I IEEE 802.11b wireless NIC
5fdff524 240device ral # Ralink Technology 802.11 wireless NIC
0dba45fe
SZ
241 # Requires wlan_ratectl_onoe and
242 # wlan_ratectl_sample
428b19ed 243device rtw # RealTek 802.11 wireless NIC
2fc6d79d 244 # Requires wlan_ratectl_onoe and wlan_wep
841ab66c
SZ
245# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
246# exists only as a PCMCIA device, so there is no ISA attachment needed
247# and resources will always be dynamically assigned by the pccard code.
248device wi
249
984263bc
MD
250# The probe order of these is presently determined by i386/isa/isa_compat.c.
251device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
252#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
253device lnc0 at isa? disable port 0x280 irq 10 drq 0
254device cs0 at isa? disable port 0x300
255device sn0 at isa? disable port 0x300 irq 10
256
257# Pseudo devices - the number indicates how many units to allocate.
258pseudo-device loop # Network loopback
259pseudo-device ether # Ethernet support
260pseudo-device sl 1 # Kernel SLIP
261pseudo-device ppp 1 # Kernel PPP
262pseudo-device tun # Packet tunnel.
263pseudo-device pty # Pseudo-ttys (telnet etc)
264pseudo-device md # Memory "disks"
265pseudo-device gif # IPv6 and IPv4 tunneling
266pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
267
268# The `bpf' pseudo-device enables the Berkeley Packet Filter.
269# Be aware of the administrative consequences of enabling this!
270pseudo-device bpf #Berkeley packet filter
271
acffed4b
JS
272pseudo-device crypto # core crypto support, used by wlan
273
984263bc
MD
274# USB support
275device uhci # UHCI PCI->USB interface
276device ohci # OHCI PCI->USB interface
277device usb # USB Bus (required)
278device ugen # Generic
279device uhid # "Human Interface Devices"
280device ukbd # Keyboard
281device ulpt # Printer
282device umass # Disks/Mass storage - Requires scbus and da
283device ums # Mouse
284device uscanner # Scanners
285device urio # Diamond Rio MP3 Player
286# USB Ethernet, requires mii
287device aue # ADMtek USB ethernet
204496c7 288device axe # ASIX Electronics USB Ethernet
984263bc
MD
289device cue # CATC USB ethernet
290device kue # Kawasaki LSI USB ethernet
3c374c15 291device rue # RealTek 8150 based USB ethernet
428b19ed
SZ
292# USB wireless NICs, requires wlan, wlan_ratectl_onoe
293device rum # Ralink Technology RT2501USB/RT2601USB
294device ural # Ralink Technology RT2500USB
984263bc
MD
295
296# FireWire support
297device firewire # FireWire bus code
298device sbp # SCSI over FireWire (Requires scbus and da)
299device fwe # Ethernet over FireWire (non-standard!)