Import ichwd(4) from FreeBSD
[dragonfly.git] / sys / config / LINT64
CommitLineData
745b8439
SW
1#
2# X86_64_LINT -- config file for checking all the sources, tries to pull in
3# as much of the source tree as it can.
4#
5# $FreeBSD: src/sys/i386/conf/LINT,v 1.749.2.144 2003/06/04 17:56:59 sam Exp $
6#
7# See the kernconf(5) manual page for more information on the format of
8# this file.
9#
10# NB: You probably don't want to try running a kernel built from this
11# file. Instead, you should start from X86_64_GENERIC, and add options
12# from this file as required.
13#
14
15# These directives are mandatory. The machine directive specifies the
16# platform and the machine_arch directive specifies the cpu architecture.
17#
18platform pc64
19machine x86_64
20machine_arch x86_64
21
22#
23# This is the ``identification'' of the kernel. Usually this should
24# be the same as the name of your kernel.
25#
26ident X86_64_LINT
27
28#
29# The `maxusers' parameter controls the static sizing of a number of
30# internal system tables by a formula defined in subr_param.c. Setting
31# maxusers to 0 will cause the system to auto-size based on physical
32# memory.
33#
34maxusers 10
35
36#
37# The `makeoptions' parameter allows variables to be passed to the
38# generated Makefile in the build area.
39#
40# CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS}
41# after most other flags. Here we use it to inhibit use of non-optimal
42# gcc builtin functions (e.g., memcmp).
43#
44# DEBUG happens to be magic.
45# The following is equivalent to 'config -g KERNELNAME' and creates
46# 'kernel.debug' compiled with -g debugging as well as a normal
47# 'kernel'. Use 'make install.debug' to install the debug kernel
48# but that isn't normally necessary as the debug symbols are not loaded
49# by the kernel and are not useful there anyway.
50#
51# KERNEL can be overridden so that you can change the default name of your
52# kernel.
53#
54# MODULES_OVERRIDE can be used to limit modules built to a specific list.
55#
56# INSTALLSTRIPPED can be set to cause installkernel to install stripped
57# kernels and modules rather than a kernel and modules with debug symbols.
58#
59# INSTALLSTRIPPEDMODULES can be set to allow a full debug kernel to be
60# installed, but to strip the installed modules.
61#
62makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc.
63#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
64#makeoptions KERNEL=foo #Build kernel "foo" and install "/foo"
65# Only build Linux API modules and plus those parts of the sound system I need.
66#makeoptions MODULES_OVERRIDE="linux sound/snd sound/pcm sound/driver/maestro3"
67#makeoptions INSTALLSTRIPPED=1
68#makeoptions INSTALLSTRIPPEDMODULES=1
69
70#
71# Certain applications can grow to be larger than the 128M limit
72# that DragonFly initially imposes. Below are some options to
73# allow that limit to grow to 256MB, and can be increased further
74# with changing the parameters. MAXDSIZ is the maximum that the
75# limit can be set to, and the DFLDSIZ is the default value for
76# the limit. MAXSSIZ is the maximum that the stack limit can be
77# set to. You might want to set the default lower than the max,
78# and explicitly set the maximum with a shell command for processes
79# that regularly exceed the limit like INND.
80#
81options MAXDSIZ="(256*1024*1024)"
82options MAXSSIZ="(256*1024*1024)"
83options DFLDSIZ="(256*1024*1024)"
84
85#
86# BLKDEV_IOSIZE sets the default block size used in user block
87# device I/O. Note that this value will be overridden by the label
88# when specifying a block device from a label with a non-0
89# partition blocksize. The default is PAGE_SIZE.
90#
91options BLKDEV_IOSIZE=8192
92
745b8439
SW
93# This allows you to actually store this configuration file into
94# the kernel binary itself, where it may be later read by saying:
95# strings -n 3 /kernel | sed -n 's/^___//p' > MYKERNEL
96#
97options INCLUDE_CONFIG_FILE # Include this file in kernel
98
99#
100# The root device and filesystem type can be compiled in;
101# this provides a fallback option if the root device cannot
102# be correctly guessed by the bootstrap code, or an override if
103# the RB_DFLTROOT flag (-r) is specified when booting the kernel.
104#
105options ROOTDEVNAME=\"ufs:da0s2e\"
106
745b8439
SW
107#####################################################################
108# SMP OPTIONS:
109#
e93ca50a
SW
110# SMP enables building of a Symmetric MultiProcessor Kernel. It will
111# boot on both SMP and UP boxes.
745b8439
SW
112#
113# Notes:
114#
115# An SMP kernel will ONLY run on an Intel MP spec. qualified motherboard.
116#
117# Check the 'Rogue SMP hardware' section to see if additional options
118# are required by your hardware.
119#
e93ca50a 120#options SMP # Symmetric MultiProcessor Kernel
745b8439 121
745b8439
SW
122#####################################################################
123# CPU OPTIONS
124
125cpu HAMMER_CPU
126
127#
128# Options for CPU features.
129#
745b8439
SW
130# CPU_DISABLE_SSE disables SSE/MMX2 instructions support.
131#
dbe005bb
SW
132# CPU_ENABLE_EST enables support for Enhanced SpeedStep technology
133# found in Pentium(tm) M processors.
134#
745b8439 135#options CPU_DISABLE_SSE
dbe005bb 136options CPU_ENABLE_EST
ebea24c3 137
745b8439
SW
138#####################################################################
139# COMPATIBILITY OPTIONS
140
141#
142# Implement system calls compatible with 4.3BSD and older versions of
143# FreeBSD. You probably do NOT want to remove this as much current code
144# still relies on the 4.3 emulation.
145#
146options COMPAT_43
147
efba76b4
SW
148# Enable NDIS binary driver support
149options NDISAPI
150device ndis
151
745b8439
SW
152#
153# These three options provide support for System V Interface
154# Definition-style interprocess communication, in the form of shared
155# memory, semaphores, and message queues, respectively.
156#
157# System V shared memory and tunable parameters
158options SYSVSHM # include support for shared memory
745b8439
SW
159options SHMMIN=2 # min shared memory segment size (bytes)
160options SHMMNI=33 # max number of shared memory identifiers
161options SHMSEG=9 # max shared memory segments per process
162
163# System V semaphores and tunable parameters
164options SYSVSEM # include support for semaphores
165options SEMMAP=31 # amount of entries in semaphore map
166options SEMMNI=11 # number of semaphore identifiers in the system
167options SEMMNS=61 # number of semaphores in the system
168options SEMMNU=31 # number of undo structures in the system
169options SEMMSL=61 # max number of semaphores per id
170options SEMOPM=101 # max number of operations per semop call
171options SEMUME=11 # max number of undo entries per process
172
173# System V message queues and tunable parameters
174options SYSVMSG # include support for message queues
175options MSGMNB=2049 # max characters per message queue
176options MSGMNI=41 # max number of message queue identifiers
177options MSGSEG=2049 # max number of message segments in the system
178options MSGSSZ=16 # size of a message segment MUST be power of 2
179options MSGTQL=41 # max amount of messages in the system
180
745b8439
SW
181#####################################################################
182# DEBUGGING OPTIONS
183
184#
185# Enable the kernel debugger.
186#
187options DDB
188
189#
190# Print a stack trace on kernel panic.
191#
192options DDB_TRACE
193
194#
195# Don't drop into DDB for a panic. Intended for unattended operation
196# where you may want to drop to DDB from the console, but still want
197# the machine to recover from a panic
198#
199options DDB_UNATTENDED
200
201#
202# If using GDB remote mode to debug the kernel, there's a non-standard
203# extension to the remote protocol that can be used to use the serial
204# port as both the debugging port and the system console. It's non-
205# standard and you're on your own if you enable it. See also the
206# "remotechat" variables in the DragonFly specific version of gdb.
207#
208options GDB_REMOTE_CHAT
209
210#
211# KTRACE enables the system-call tracing facility ktrace(2).
212#
213options KTRACE #kernel tracing
214
215#
216# The INVARIANTS option is used in a number of source files to enable
217# extra sanity checking of internal structures. This support is not
218# enabled by default because of the extra time it would take to check
219# for these conditions, which can only occur as a result of
220# programming errors.
221#
222options INVARIANTS
223
224#
225# The DIAGNOSTIC option is used to enable extra debugging information
226# from some parts of the kernel. As this makes everything more noisy,
227# it is disabled by default.
228#
229options DIAGNOSTIC
230
231#
232# PERFMON causes the driver for Pentium/Pentium Pro performance counters
233# to be compiled. See perfmon(4) for more information.
234#
235options PERFMON
236
237
238#
239# This option let some drivers co-exist that can't co-exist in a running
240# system. This is used to be able to compile all kernel code in one go for
241# quality assurance purposes (like this file, which the option takes it name
242# from.)
243#
244options COMPILING_LINT
245
246
247# XXX - this doesn't belong here.
248# Allow ordinary users to take the console - this is useful for X.
249options UCONSOLE
250
745b8439
SW
251#####################################################################
252# NETWORKING OPTIONS
253
254#
255# Protocol families:
256# Only the INET (Internet) family is officially supported in DragonFly.
257# Source code for the NS (Xerox Network Service) is provided for amusement
258# value.
259#
260options INET #Internet communications protocols
261options INET6 #IPv6 communications protocols
262options IPSEC #IP security
263options IPSEC_ESP #IP security (crypto; define w/ IPSEC)
264options IPSEC_DEBUG #debug for IP security
265#
266# Set IPSEC_FILTERGIF to force packets coming through a gif tunnel
d912a10e 267# to be processed by any configured packet filtering (ipfw).
745b8439
SW
268# The default is that packets coming from a tunnel are _not_ processed;
269# they are assumed trusted.
270#
271# Note that enabling this can be problematic as there are no mechanisms
272# in place for distinguishing packets coming out of a tunnel (e.g. no
273# encX devices as found on openbsd).
274#
275#options IPSEC_FILTERGIF #filter ipsec packets from a tunnel
276
277#
278# Experimental IPsec implementation that uses the kernel crypto
279# framework. This cannot be configured together with IPSEC and
280# (currently) supports only IPv4. To use this you must also
281# configure the crypto device (see below). Note that with this
282# you get all the IPsec protocols (e.g. there is no FAST_IPSEC_ESP).
283# IPSEC_DEBUG is used, as above, to configure debugging support
284# within the IPsec protocols.
285#
286#options FAST_IPSEC #new IPsec
287
288options IPX #IPX/SPX communications protocols
289options IPXIP #IPX in IP encapsulation (not available)
290options IPTUNNEL #IP in IPX encapsulation (not available)
291
292options NCP #NetWare Core protocol
293
294options MPLS #Multi-Protocol Label Switching
295
7902ca8c
SW
296#
297# SMB/CIFS requester
298# NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV
299# options.
300# NETSMBCRYPTO enables support for encrypted passwords.
301options NETSMB #SMB/CIFS requester
302options NETSMBCRYPTO #encrypted password support for SMB
303
745b8439
SW
304# mchain library. It can be either loaded as KLD or compiled into kernel
305options LIBMCHAIN #mbuf management library
306
307# netgraph(4). Enable the base netgraph code with the NETGRAPH option.
308# Individual node types can be enabled with the corresponding option
309# listed below; however, this is not strictly necessary as netgraph
310# will automatically load the corresponding KLD module if the node type
311# is not already compiled into the kernel. Each type below has a
312# corresponding man page, e.g., ng_async(4).
313options NETGRAPH #netgraph(4) system
314options NETGRAPH_ASYNC
315options NETGRAPH_BPF
316options NETGRAPH_BRIDGE
317options NETGRAPH_CISCO
318options NETGRAPH_ECHO
319options NETGRAPH_EIFACE
320options NETGRAPH_ETHER
321options NETGRAPH_FRAME_RELAY
322options NETGRAPH_HOLE
323options NETGRAPH_IFACE
324options NETGRAPH_KSOCKET
325options NETGRAPH_L2TP
326options NETGRAPH_LMI
327# MPPC compression requires proprietary files (not included)
328#options NETGRAPH_MPPC_COMPRESSION
329options NETGRAPH_MPPC_ENCRYPTION
330options NETGRAPH_ONE2MANY
331options NETGRAPH_PPP
332options NETGRAPH_PPPOE
333options NETGRAPH_PPTPGRE
334options NETGRAPH_RFC1490
335options NETGRAPH_SOCKET
336options NETGRAPH_TEE
337options NETGRAPH_TTY
338options NETGRAPH_UI
339options NETGRAPH_VJC
340
341device mn # Munich32x/Falc54 Nx64kbit/sec cards.
342
343#
344# Network interfaces:
345# The `loop' pseudo-device is MANDATORY when networking is enabled.
346# The `ether' pseudo-device provides generic code to handle
347# Ethernets; it is MANDATORY when a Ethernet device driver is
348# configured.
349# The `sppp' pseudo-device serves a similar role for certain types
350# of synchronous PPP links (like `ar').
351# The `sl' pseudo-device implements the Serial Line IP (SLIP) service.
352# The `ppp' pseudo-device implements the Point-to-Point Protocol.
353# The `bpf' pseudo-device enables the Berkeley Packet Filter. Be
354# aware of the legal and administrative consequences of enabling this
355# option. The number of devices determines the maximum number of
356# simultaneous BPF clients programs runnable.
357# The `disc' pseudo-device implements a minimal network interface,
358# which throws away all packets sent and never receives any. It is
359# included for testing purposes. This shows up as the 'ds' interface.
360# The `tun' pseudo-device implements (user-)ppp and nos-tun
361# The `gif' pseudo-device implements IPv6 over IP4 tunneling,
362# IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and
363# IPv6 over IPv6 tunneling.
364# The `gre' device implements two types of IP4 over IP4 tunneling:
365# GRE and MOBILE, as specified in the RFC1701 and RFC2004.
366# The `faith' pseudo-device captures packets sent to it and diverts them
367# to the IPv4/IPv6 translation daemon.
368# The `stf' device implements 6to4 encapsulation.
369# The `ef' pseudo-device provides support for multiple ethernet frame types
370# specified via ETHER_* options. See ef(4) for details.
371#
372# The PPP_BSDCOMP option enables support for compress(1) style entire
373# packet compression, the PPP_DEFLATE is for zlib/gzip style compression.
374# PPP_FILTER enables code for filtering the ppp data stream and selecting
375# events for resetting the demand dial activity timer - requires bpf.
376# See pppd(8) for more details.
377#
378pseudo-device ether #Generic Ethernet
379pseudo-device vlan 1 #VLAN support
380pseudo-device bridge #Bridging support
381pseudo-device sppp #Generic Synchronous PPP
382pseudo-device loop #Network loopback device
383pseudo-device bpf #Berkeley packet filter
384pseudo-device disc #Discard device (ds0, ds1, etc)
ded7543c 385pseudo-device tap #Ethernet tunnel network interface
745b8439
SW
386pseudo-device tun #Tunnel driver (ppp(8), nos-tun(8))
387pseudo-device sl 2 #Serial Line IP
388pseudo-device gre #IP over IP tunneling
389pseudo-device ppp 2 #Point-to-point protocol
390options PPP_BSDCOMP #PPP BSD-compress support
391options PPP_DEFLATE #PPP zlib/deflate/gzip support
392options PPP_FILTER #enable bpf filtering (needs bpf)
393
394pseudo-device ef # Multiple ethernet frames support
395options ETHER_II # enable Ethernet_II frame
396options ETHER_8023 # enable Ethernet_802.3 (Novell) frame
397options ETHER_8022 # enable Ethernet_802.2 frame
398options ETHER_SNAP # enable Ethernet_802.2/SNAP frame
399
400# for IPv6
401pseudo-device gif #IPv6 and IPv4 tunneling
402pseudo-device faith 1 #for IPv6 and IPv4 translation
403pseudo-device stf #6to4 IPv6 over IPv4 encapsulation
404
405#
406# Internet family options:
407#
408# MROUTING enables the kernel multicast packet forwarder, which works
409# with mrouted(8).
410#
411# PIM enables Protocol Independent Multicast in the kernel.
412# Requires MROUTING enabled.
413#
414# IPFIREWALL enables support for IP firewall construction, in
415# conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends
416# logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT
417# limits the number of times a matching entry can be logged.
418#
419# WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any"
420# and if you do not add other rules during startup to allow access,
421# YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open
422# in /etc/rc.conf when first enabling this feature, then refining the
423# firewall rules in /etc/rc.firewall after you've tested that the new kernel
424# feature works properly.
425#
426# IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to
427# allow everything. Use with care, if a cracker can crash your
428# firewall machine, they can get to your protected machines. However,
429# if you are using it as an as-needed filter for specific problems as
430# they arise, then this may be for you. Changing the default to 'allow'
431# means that you won't get stuck if the kernel and /sbin/ipfw binary get
432# out of sync.
433#
434# IPDIVERT enables the divert IP sockets, used by ``ipfw divert''
435#
436# IPSTEALTH enables code to support stealth forwarding (i.e., forwarding
437# packets without touching the ttl). This can be useful to hide firewalls
438# from traceroute and similar tools.
439#
440# TCPDEBUG is undocumented.
441#
442options MROUTING # Multicast routing
443options PIM # Protocol Independent Multicast
444options IPFIREWALL #firewall
445options IPFIREWALL_DEBUG #debug prints
446options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
745b8439
SW
447options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
448options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
449options IPV6FIREWALL #firewall for IPv6
450options IPV6FIREWALL_VERBOSE
451options IPV6FIREWALL_VERBOSE_LIMIT=100
452options IPV6FIREWALL_DEFAULT_TO_ACCEPT
453options IPDIVERT #divert sockets
745b8439
SW
454options IPSTEALTH #support for stealth forwarding
455options TCPDEBUG
456
457device pf
458device pflog
459
460#CARP
461pseudo-device carp
462options CARP
463
464# The MBUF_STRESS_TEST option enables options which create
465# various random failures / extreme cases related to mbuf
466# functions. See the mbuf(9) manpage for a list of available
467# test cases.
468options MBUF_STRESS_TEST
469
470# Statically link in accept filters
471options ACCEPT_FILTER_DATA
472options ACCEPT_FILTER_HTTP
473
474# TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are
475# carried in TCP option 19. This option is commonly used to protect
476# TCP sessions (e.g. BGP) where IPSEC is not available nor desirable.
0defa1cf
SZ
477# This is enabled on a per-socket basis using the TCP_SIGNATURE_ENABLE
478# socket option.
745b8439
SW
479# This requires the use of 'device crypto', 'options IPSEC'
480# or 'device cryptodev'.
481options TCP_SIGNATURE #include support for RFC 2385
482
483#
484# TCP_DROP_SYNFIN adds support for ignoring TCP packets with SYN+FIN. This
485# prevents nmap et al. from identifying the TCP/IP stack, but breaks support
486# for RFC1644 extensions and is not recommended for web servers.
487#
488options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN
489
490# ICMP_BANDLIM enables icmp error response bandwidth limiting. You
491# typically want this option as it will help protect the machine from
492# D.O.S. packet attacks.
493#
494options ICMP_BANDLIM
495
496# DUMMYNET enables the "dummynet" bandwidth limiter. You need
497# IPFIREWALL as well. See the dummynet(4) and ipfw(8) manpages for more info.
498#
499options DUMMYNET
500options DUMMYNET_DEBUG
501
502#
503# ATM (HARP version) options
504#
505# ATM_CORE includes the base ATM functionality code. This must be included
506# for ATM support.
507#
508# ATM_IP includes support for running IP over ATM.
509#
510# At least one (and usually only one) of the following signalling managers
511# must be included (note that all signalling managers include PVC support):
512# ATM_SIGPVC includes support for the PVC-only signalling manager `sigpvc'.
513# ATM_SPANS includes support for the `spans' signalling manager, which runs
514# the FORE Systems's proprietary SPANS signalling protocol.
515# ATM_UNI includes support for the `uni30' and `uni31' signalling managers,
516# which run the ATM Forum UNI 3.x signalling protocols.
517#
518# The `hea' driver provides support for the Efficient Networks, Inc.
519# ENI-155p ATM PCI Adapter.
520#
521# The `hfa' driver provides support for the FORE Systems, Inc.
522# PCA-200E ATM PCI Adapter.
523#
524#options ATM_CORE #core ATM protocol family
525#options ATM_IP #IP over ATM support
526#options ATM_SIGPVC #SIGPVC signalling manager
527#options ATM_SPANS #SPANS signalling manager
528#options ATM_UNI #UNI signalling manager
529#device hea #Efficient ENI-155p ATM PCI
530#device hfa #FORE PCA-200E ATM PCI
531
532# DEVICE_POLLING adds support for mixed interrupt-polling handling
533# of network device drivers, which has significant benefits in terms
534# of robustness to overloads and responsivity, as well as permitting
535# accurate scheduling of the CPU time between kernel network processing
536# and other activities. The drawback is a moderate (up to 1/pollhz seconds)
537# potential increase in response times. See polling(4) for further details.
538#
539options DEVICE_POLLING
540
541# IFPOLL_ENABLE adds hardware queues' based polling
542options IFPOLL_ENABLE
543
745b8439
SW
544#####################################################################
545# FILESYSTEM OPTIONS
546
547#
548# Only the root, /usr, and /tmp filesystems need be statically
549# compiled; everything else will be automatically loaded at mount
550# time. (Exception: the UFS family --- FFS, and MFS ---
551# cannot currently be demand-loaded.) Some people still prefer
552# to statically compile other filesystems as well.
553#
554# NB: The PORTAL and UNION filesystems are known to be
555# buggy, and WILL panic your system if you attempt to do anything with
556# them. They are included here as an incentive for some enterprising
557# soul to sit down and fix them.
558#
559
560# One of these is mandatory:
561options FFS #Fast filesystem
562options MFS #Memory filesystem
563options NFS #Network filesystem
564
565# The rest are optional:
566#options NFS_NOSERVER #Disable the NFS-server code.
567options CD9660 #ISO 9660 filesystem
568options FDESC #File descriptor filesystem
8124268f 569options HAMMER #HAMMER filesystem
745b8439
SW
570options HPFS #OS/2 File system
571options MSDOSFS #MS DOS filesystem
572options NTFS #NT filesystem
573options NULLFS #NULL filesystem
574options NWFS #NetWare filesystem
575options PORTAL #Portal filesystem
576options PROCFS #Process filesystem
ab5617b3 577options PUFFS #Userspace file systems (e.g. ntfs-3g & sshfs)
7902ca8c 578options SMBFS #SMB/CIFS filesystem
745b8439 579options TMPFS #Temporary filesystem
8124268f 580options UDF #UDF filesystem
745b8439
SW
581
582# YYY-DR Till we rework the VOP methods for this filesystem
583#options UNION #Union filesystem
584# The xFS_ROOT options REQUIRE the associated ``options xFS''
585options FFS_ROOT #FFS usable as root device
586options NFS_ROOT #NFS usable as root device
587
588# Soft updates is technique for improving UFS filesystem speed and
589# making abrupt shutdown less risky.
590options SOFTUPDATES
591
592# Directory hashing improves the speed of operations on very large
593# directories at the expense of some memory.
594options UFS_DIRHASH
595
596# Make space in the kernel for a root filesystem on a md device.
597# Define to the number of kilobytes to reserve for the filesystem.
598options MD_ROOT_SIZE=10
599
600# Make the md device a potential root device, either with preloaded
601# images of type mfs_root or md_root.
602options MD_ROOT
603
604# Specify double the default maximum size for malloc(9)-backed md devices.
605options MD_NSECT=40000
606
607# Allow this many swap-devices.
608#
609# In order to manage swap, the system must reserve bitmap space that
610# scales with the largest mounted swap device multiplied by NSWAPDEV,
611# regardless of whether other swap devices exist or not. So it
612# is not a good idea to make this value too large.
613options NSWAPDEV=5
614
615# Disk quotas are supported when this option is enabled.
616options QUOTA #enable disk quotas
617
618# If you are running a machine just as a fileserver for PC and MAC
d22a69a4 619# users, e.g. using SAMBA, you may consider setting this option
745b8439
SW
620# and keeping all those users' directories on a filesystem that is
621# mounted with the suiddir option. This gives new files the same
622# ownership as the directory (similar to group). It's a security hole
623# if you let these users run programs, so confine it to file-servers
624# (but it'll save you lots of headaches in those cases). Root owned
625# directories are exempt and X bits are cleared. The suid bit must be
626# set on the directory as well; see chmod(1) PC owners can't see/set
627# ownerships so they keep getting their toes trodden on. This saves
628# you all the support calls as the filesystem it's used on will act as
629# they expect: "It's my dir so it must be my file".
630#
631options SUIDDIR
632
633# NFS options:
634options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec
635options NFS_MAXATTRTIMO=60
636options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec
637options NFS_MAXDIRATTRTIMO=60
638options NFS_GATHERDELAY=10 # Default write gather delay (msec)
639options NFS_UIDHASHSIZ=29 # Tune the size of nfssvc_sock with this
640options NFS_WDELAYHASHSIZ=16 # and with this
641options NFS_MUIDHASHSIZ=63 # Tune the size of nfsmount with this
642options NFS_DEBUG # Enable NFS Debugging
643
644# MSDOSFS options:
645options MSDOSFS_DEBUG # Enable MSDOSFS Debugging
646
647#
648# Add support for the EXT2FS filesystem of Linux fame. Be a bit
649# careful with this - the ext2fs code has a tendency to lag behind
650# changes and not be exercised very much, so mounting read/write could
651# be dangerous (and even mounting read only could result in panics.)
652#
653options EXT2FS
654
655# Optional character code conversion support with LIBICONV.
656# Each option requires their base file system and LIBICONV.
657options CD9660_ICONV
658options MSDOSFS_ICONV
659options NTFS_ICONV
660
745b8439
SW
661#####################################################################
662# POSIX P1003.1B
663
664# Real time extensions added in the 1993 Posix
665# P1003_1B: Infrastructure
666# _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING
667# _KPOSIX_VERSION: Version kernel is built for
668
669options P1003_1B
670options _KPOSIX_PRIORITY_SCHEDULING
671options _KPOSIX_VERSION=199309L
672
745b8439
SW
673#####################################################################
674# CLOCK OPTIONS
675
676# The granularity of operation is controlled by the kernel option HZ whose
677# default value (100) means a granularity of 10ms (1s/HZ).
678# Consider, however, that reducing the granularity too much might
679# cause excessive overhead in clock interrupt processing,
680# potentially causing ticks to be missed and thus actually reducing
681# the accuracy of operation.
682
683options HZ=100
684
685# The following options are used for debugging clock behavior only, and
686# should not be used for production systems.
687#
688# CLK_CALIBRATION_LOOP will run the clock calibration loop at startup
689# until the user presses a key.
690
691#options CLK_CALIBRATION_LOOP
692
693# The following two options measure the frequency of the corresponding
694# clock relative to the RTC (onboard mc146818a).
695
696#options CLK_USE_I8254_CALIBRATION
697#options CLK_USE_TSC_CALIBRATION
698
745b8439
SW
699#####################################################################
700# SCSI DEVICES
701
702# SCSI DEVICE CONFIGURATION
703
704# The SCSI subsystem consists of the `base' SCSI code, a number of
705# high-level SCSI device `type' drivers, and the low-level host-adapter
706# device drivers. The host adapters are listed in the ISA and PCI
707# device configuration sections below.
708#
709# Beginning with FreeBSD 2.0.5 you can wire down your SCSI devices so
710# that a given bus, target, and LUN always come on line as the same
711# device unit. In earlier versions the unit numbers were assigned
712# in the order that the devices were probed on the SCSI bus. This
713# means that if you removed a disk drive, you may have had to rewrite
714# your /etc/fstab file, and also that you had to be careful when adding
715# a new disk as it may have been probed earlier and moved your device
716# configuration around.
717
718# This old behavior is maintained as the default behavior. The unit
719# assignment begins with the first non-wired down unit for a device
720# type. For example, if you wire a disk as "da3" then the first
721# non-wired disk will be assigned da4.
722
723# The syntax for wiring down devices is:
724
725# device scbus0 at ahc0 # Single bus device
726# device scbus1 at ahc1 bus 0 # Single bus device
727# device scbus3 at ahc2 bus 0 # Twin bus device
728# device scbus2 at ahc2 bus 1 # Twin bus device
729# device da0 at scbus0 target 0 unit 0
730# device da1 at scbus3 target 1
731# device da2 at scbus2 target 3
732# device sa1 at scbus1 target 6
733# device cd
734
735# "units" (SCSI logical unit number) that are not specified are
736# treated as if specified as LUN 0.
737
738# All SCSI devices allocate as many units as are required.
739
740# The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI
741# configuration and doesn't have to be explicitly configured.
742
743device scbus #base SCSI code
744device ch #SCSI media changers
745device da #SCSI direct access devices (aka disks)
746device sa #SCSI tapes
747device cd #SCSI CD-ROMs
748device pass #CAM passthrough driver
749device sg #Passthrough device (linux scsi generic)
750device pt #SCSI processor type
751device ses #SCSI SES/SAF-TE driver
752
753# Options for device mapper
754device dm
755device dm_target_crypt
756device dm_target_linear
757device dm_target_striped
758
759# Options for iSCSI
760device iscsi_initiator
761options ISCSI_INITIATOR_DEBUG=8
762
763# CAM OPTIONS:
764# debugging options:
765# -- NOTE -- If you specify one of the bus/target/lun options, you must
766# specify them all!
767# CAMDEBUG: When defined enables debugging macros
768# CAM_DEBUG_BUS: Debug the given bus. Use -1 to debug all busses.
769# CAM_DEBUG_TARGET: Debug the given target. Use -1 to debug all targets.
770# CAM_DEBUG_LUN: Debug the given lun. Use -1 to debug all luns.
771# CAM_DEBUG_FLAGS: OR together CAM_DEBUG_INFO, CAM_DEBUG_TRACE,
772# CAM_DEBUG_SUBTRACE, and CAM_DEBUG_CDB
773#
774# CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds
775# SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions
776# SCSI_NO_OP_STRINGS: When defined disables opcode descriptions
777# SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter)
778# queue after a bus reset, and the number of milliseconds to
779# freeze the device queue after a bus device reset. This
780# can be changed at boot and runtime with the
781# kern.cam.scsi_delay tunable/sysctl.
782options CAMDEBUG
783options CAM_DEBUG_BUS=-1
784options CAM_DEBUG_TARGET=-1
785options CAM_DEBUG_LUN=-1
786options CAM_DEBUG_FLAGS="CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB"
787options CAM_MAX_HIGHPOWER=4
788options SCSI_NO_SENSE_STRINGS
789options SCSI_NO_OP_STRINGS
790options SCSI_DELAY=8000 # Be pessimistic about Joe SCSI device
791
792# Options for the CAM CDROM driver:
793# CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN
794# CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only
795# enforced if there is I/O waiting for another LUN
796# The compiled in defaults for these variables are 2 and 10 seconds,
797# respectively.
798#
799# These can also be changed on the fly with the following sysctl variables:
800# kern.cam.cd.changer.min_busy_seconds
801# kern.cam.cd.changer.max_busy_seconds
802#
803options CHANGER_MIN_BUSY_SECONDS=2
804options CHANGER_MAX_BUSY_SECONDS=10
805
806# Options for the CAM sequential access driver:
807# SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes
808# SA_SPACE_TIMEOUT: Timeout for space operations, in minutes
809# SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes
810# SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes
811# SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT.
812options SA_IO_TIMEOUT="(4)"
813options SA_SPACE_TIMEOUT="(60)"
814options SA_REWIND_TIMEOUT="(2*60)"
815options SA_ERASE_TIMEOUT="(4*60)"
816options SA_1FM_AT_EOD
817
818# Optional timeout for the CAM processor target (pt) device
819# This is specified in seconds. The default is 60 seconds.
820options SCSI_PT_DEFAULT_TIMEOUT="60"
821
822# Optional enable of doing SES passthrough on other devices (e.g., disks)
823#
824# Normally disabled because a lot of newer SCSI disks report themselves
825# as having SES capabilities, but this can then clot up attempts to build
826# build a topology with the SES device that's on the box these drives
827# are in....
828options SES_ENABLE_PASSTHROUGH
829
745b8439
SW
830#####################################################################
831# MISCELLANEOUS DEVICES AND OPTIONS
832
833# The `pty' device usually turns out to be ``effectively mandatory'',
834# as it is required for `telnetd', `rlogind', `screen', `emacs', and
835# `xterm', among others.
836
837pseudo-device pty #Pseudo ttys
838pseudo-device gzip #Exec gzipped a.out's
839pseudo-device vn #Vnode driver (turns a file into a device)
840pseudo-device md #Memory/malloc disk
ab5617b3 841pseudo-device putter #for puffs and pud
745b8439
SW
842pseudo-device snp #Snoop device - to look at pty/vty/etc..
843pseudo-device ccd 4 #Concatenated disk driver
844
845# Configuring Vinum into the kernel is not necessary, since the kld
846# module gets started automatically when vinum(8) starts. This
847# device is also untested. Use at your own risk.
848#
849# The option VINUMDEBUG must match the value set in CFLAGS
850# in src/sbin/vinum/Makefile. Failure to do so will result in
851# the following message from vinum(8):
852#
853# Can't get vinum config: Invalid argument
854#
855# see vinum(4) for more reasons not to use these options.
10de45eb 856pseudo-device vinum #Vinum concat/mirror/raid driver
745b8439
SW
857#options VINUMDEBUG #enable Vinum debugging hooks
858
859# Kernel side iconv library
860options LIBICONV
861
862# Size of the kernel message buffer. Should be N * pagesize.
863options MSGBUF_SIZE=40960
864
745b8439
SW
865#####################################################################
866# HARDWARE DEVICE CONFIGURATION
867
868# ISA devices:
869
870#
871# Mandatory ISA devices: isa
872#
873device isa
874
875#
876# Options for `isa':
877#
878# AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A
879# interrupt controller. This saves about 0.7-1.25 usec for each interrupt.
880# This option breaks suspend/resume on some portables.
881#
882# AUTO_EOI_2 enables the `automatic EOI' feature for the slave 8259A
883# interrupt controller. This saves about 0.7-1.25 usec for each interrupt.
884# Automatic EOI is documented not to work for for the slave with the
885# original i8259A, but it works for some clones and some integrated
886# versions.
887#
888# MAXMEM specifies the amount of RAM on the machine; if this is not
889# specified, DragonFly will first read the amount of memory from the CMOS
890# RAM, so the amount of memory will initially be limited to 64MB or 16MB
891# depending on the BIOS. If the BIOS reports 64MB, a memory probe will
892# then attempt to detect the installed amount of RAM. If this probe
893# fails to detect >64MB RAM you will have to use the MAXMEM option.
894# The amount is in kilobytes, so for a machine with 128MB of RAM, it would
895# be 131072 (128 * 1024).
896#
897# BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to
898# reset the CPU for reboot. This is needed on some systems with broken
899# keyboard controllers.
900
901options AUTO_EOI_1
902#options AUTO_EOI_2
903options MAXMEM="(128*1024)"
904#options BROKEN_KEYBOARD_RESET
905
906# Enable support for the kernel PLL to use an external PPS signal,
907# under supervision of [x]ntpd(8)
908# More info in ntpd documentation: http://www.eecis.udel.edu/~ntp
909
910options PPS_SYNC
911
912# The keyboard controller; it controls the keyboard and the PS/2 mouse.
913device atkbdc0 at isa? port IO_KBD
914
915# The AT keyboard
916device atkbd0 at atkbdc? irq 1
917
918# Options for atkbd:
919options ATKBD_DFLT_KEYMAP # specify the built-in keymap
920makeoptions ATKBD_DFLT_KEYMAP="jp.106"
921
922# These options are valid for other keyboard drivers as well.
923options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap
924options KBD_INSTALL_CDEV # install a CDEV entry in /dev
925
926# `flags' for atkbd:
927# 0x01 Force detection of keyboard, else we always assume a keyboard
928# 0x02 Don't reset keyboard, useful for some newer ThinkPads
929# 0x03 Force detection and avoid reset, might help with certain
930# dockingstations
931# 0x04 Old-style (XT) keyboard support, useful for older ThinkPads
932
933# PS/2 mouse
934device psm0 at atkbdc? irq 12
935
936# Options for psm:
937options PSM_HOOKRESUME #hook the system resume event, useful
938 #for some laptops
939options PSM_RESETAFTERSUSPEND #reset the device at the resume event
940
941device kbdmux # keyboard multiplexer
942
943# The video card driver.
944device vga0 at isa?
945
946# Options for vga:
947# Try the following option if the mouse pointer is not drawn correctly
948# or font does not seem to be loaded properly. May cause flicker on
949# some systems.
950options VGA_ALT_SEQACCESS
951
952options VGA_DEBUG=2 # enable VGA debug output
953
954# If you experience problems switching back to 80x25 (or a derived mode),
955# the following option might help.
956#options VGA_KEEP_POWERON_MODE # use power-on settings for 80x25
957
958# If you can dispense with some vga driver features, you may want to
959# use the following options to save some memory.
960#options VGA_NO_FONT_LOADING # don't save/load font
961#options VGA_NO_MODE_CHANGE # don't change video modes
962
963# The following option probably won't work with the LCD displays.
964options VGA_WIDTH90 # support 90 column modes
965
966# Splash screen at start up! Screen savers require this too.
967pseudo-device splash
968
969# The syscons console driver (sco color console compatible).
970device sc0 at isa?
971options MAXCONS=16 # number of virtual consoles
972options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode
973options SC_DEBUG_LEVEL=5 # enable debug output
974options SC_DFLT_FONT # compile font in
975makeoptions SC_DFLT_FONT=cp850
976options SC_DISABLE_DDBKEY # disable `debug' key
977options SC_DISABLE_REBOOT # disable reboot key sequence
978options SC_HISTORY_SIZE=200 # number of history buffer lines
979options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor
980options SC_PIXEL_MODE # add support for the raster text mode
981
982# The following options will let you change the default colors of syscons.
983options SC_NORM_ATTR="(FG_GREEN|BG_BLACK)"
984options SC_NORM_REV_ATTR="(FG_YELLOW|BG_GREEN)"
985options SC_KERNEL_CONS_ATTR="(FG_RED|BG_BLACK)"
986options SC_KERNEL_CONS_REV_ATTR="(FG_BLACK|BG_RED)"
987
988# If you have a two button mouse, you may want to add the following option
989# to use the right button of the mouse to paste text.
990options SC_TWOBUTTON_MOUSE
991
992# You can selectively disable features in syscons.
993#options SC_NO_CUTPASTE
994#options SC_NO_FONT_LOADING
995#options SC_NO_HISTORY
996#options SC_NO_SYSMOUSE
997
998#
c67c071b 999# SCSI host adapters: `bt'
745b8439
SW
1000#
1001# adv: All Narrow SCSI bus AdvanSys controllers.
1002# adw: Second Generation AdvanSys controllers including the ADV940UW.
745b8439 1003# ahc: Adaptec 274x/284x/294x
c67c071b 1004# aic: Adaptec 1460
745b8439
SW
1005# bt: Most Buslogic controllers
1006# ncv: NCR 53C500 based SCSI host adapters.
1007# nsp: Workbit Ninja SCSI-3 based PC Card SCSI host adapters.
1008# stg: TMC 18C30, 18C50 based ISA/PC Card SCSI host adapters.
1009#
1010# Note that the order is important in order for Buslogic cards to be
1011# probed correctly.
1012#
1013
1014device bt0 at isa? port IO_BT0
1015device adv0 at isa?
1016device adw
c67c071b 1017device aic
745b8439
SW
1018device ncv
1019device nsp
1020device stg0 at isa? port 0x140 irq 11
1021
1022#
1023# Adaptec FSA RAID controllers, including integrated DELL controller,
1024# the Dell PERC 2/QC and the HP NetRAID-4M
1025#
1026device aac
1027options AAC_DEBUG
1028device aacp # SCSI Passthrough interface (optional, CAM required)
1029
1030#
1031# Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only
1032# one entry is needed; the code will find and configure all supported
1033# controllers.
1034#
1035device ida # Compaq Smart RAID
1036device mlx # Mylex DAC960
1037device amr # AMI MegaRAID
1038device amrp # SCSI Passthrough interface (optional, CAM req.)
1039device mfi # LSI MegaRAID SAS
1040device mfip # LSI MegaRAID SAS passthrough, requires CAM
1041options MFI_DEBUG
1042
1043#
1044# Areca RAID (CAM is required).
1045#
1046device arcmsr # Areca SATA II RAID
1047
1048#
1049# Highpoint RocketRAID 182x.
1050device hptmv
1051
1052#
1053# Highpoint RocketRaid 3xxx series SATA RAID
1054device hptiop
1055
1056#
1057# 3ware ATA RAID
1058#
1059device twe # 3ware ATA RAID
1060device twa # 3ware 9000 series PATA/SATA RAID
1061options TWA_DEBUG=10 # enable debug messages
1062device tws # 3ware 9750 series SATA/SAS RAID
1063
1064#
1065# Promise Supertrack SX6000
1066#
1067#device pst
1068
1069#
1070# IBM ServeRAID
1071#
1072device ips
1073
745b8439
SW
1074# AHCI driver, this will override NATA for AHCI devices,
1075# both drivers may be included.
1076#
1077device ahci
1078
1079# SiI3124/3132 driver
1080#
1081device sili
1082
df75ede4
SW
1083# The 'NATA' driver supports all ATA and ATAPI devices.
1084# You only need one "device nata" for it to find all
1085# PCI ATA/ATAPI devices on modern machines.
1086#
745b8439
SW
1087device nata
1088device natadisk # ATA disk drives
1089device natapicd # ATAPI CD/DVD drives
1090device natapifd # ATAPI floppy drives
1091device natapist # ATAPI tape drives
1092device natapicam # ATAPI CAM layer emulation
1093device nataraid # support for ATA software RAID controllers
1094device natausb # ATA-over-USB support
1095
df75ede4 1096# The following options are valid for the NATA driver:
745b8439
SW
1097#
1098# ATA_STATIC_ID: controller numbering is static (like the old driver)
1099# else the device numbers are dynamically allocated.
1100options ATA_STATIC_ID
1101
745b8439 1102# For older non-PCI systems, these are the lines to use:
df75ede4
SW
1103#
1104#device nata0 at isa? port IO_WD1 irq 14
1105#device nata1 at isa? port IO_WD2 irq 15
745b8439
SW
1106
1107#
1108# Standard floppy disk controllers: `fdc' and `fd'
1109#
1110#device fdc0 at isa? port IO_FD1 irq 6 drq 2
1111#
1112# FDC_DEBUG enables floppy debugging. Since the debug output is huge, you
1113# gotta turn it actually on by setting the variable fd_debug with DDB,
1114# however.
1115#options FDC_DEBUG
1116
1117#device fd0 at fdc0 drive 0
1118#device fd1 at fdc0 drive 1
1119
1120#
745b8439
SW
1121# sio: serial ports (see sio(4))
1122
1123device sio0 at isa? port IO_COM1 flags 0x10 irq 4
1124
1125#
1126# `flags' for serial drivers that support consoles (only for sio now):
1127# 0x10 enable console support for this unit. The other console flags
1128# are ignored unless this is set. Enabling console support does
1129# not make the unit the preferred console - boot with -h or set
1130# the 0x20 flag for that. Currently, at most one unit can have
1131# console support; the first one (in config file order) with
1132# this flag set is preferred. Setting this flag for sio0 gives
1133# the old behaviour.
1134# 0x20 force this unit to be the console (unless there is another
1135# higher priority console). This replaces the COMCONSOLE option.
1136# 0x40 reserve this unit for low level console operations. Do not
1137# access the device in any normal way.
1138# 0x80 use this port for serial line gdb support in ddb.
1139#
1140# PnP `flags' (set via userconfig using pnp x flags y)
1141# 0x1 disable probing of this device. Used to prevent your modem
1142# from being attached as a PnP modem.
1143#
1144
1145# Options for serial drivers that support consoles (only for sio now):
1146options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to
1147 #DDB, if available.
1148options CONSPEED=115200 # speed for serial console
1149 # (default 9600)
1150
1151# Solaris implements a new BREAK which is initiated by a character
1152# sequence CR ~ ^b which is similar to a familiar pattern used on
1153# Sun servers by the Remote Console.
1154options ALT_BREAK_TO_DEBUGGER
1155
1156# Options for sio:
1157options COM_ESP #code for Hayes ESP
1158options COM_MULTIPORT #code for some cards with shared IRQs
1159
1160# Other flags for sio that aren't documented in the man page.
1161# 0x20000 enable hardware RTS/CTS and larger FIFOs. Only works for
1162# ST16650A-compatible UARTs.
1163
3323f1c7
SW
1164# PCI Universal Communications driver
1165# Supports various single and multi port PCI serial cards. Maybe later
1166# also the parallel ports on combination serial/parallel cards. New cards
1167# can be added in src/sys/dev/misc/puc/pucdata.c.
1168device puc
1169
745b8439 1170#
ad9f8794 1171# Network interfaces: `ed', `ep', `is', `lnc'
745b8439
SW
1172#
1173# cs: IBM Etherjet and other Crystal Semi CS89x0-based adapters
1174# ed: Western Digital and SMC 80xx; Novell NE1000 and NE2000; 3Com 3C503
1175# ep: 3Com 3C509
1176# ex: Intel EtherExpress Pro/10 and other i82595-based adapters
1177# fe: Fujitsu MB86960A/MB86965A Ethernet
745b8439
SW
1178# lnc: Lance/PCnet cards (Isolan, Novell NE2100, NE32-VL, AMD Am7990 & Am79C960)
1179# sbsh: Granch SBNI16 SHDSL modem PCI adapters
1180# wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both
1181# the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA
1182# bridge with a PCMCIA adapter plugged into it.
1183# an: Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA,
1184# PCI and ISA varieties.
1185# xe: Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller.
1186#
1187device cs0 at isa? port 0x300
1188device ed0 at isa? port 0x280 irq 5 iomem 0xd8000
1189device ep
1190device ex
745b8439
SW
1191device lnc0 at isa? port 0x280 irq 10 drq 0
1192device sln
1193device sn0 at isa? port 0x300 irq 10
1194
1195# Wlan support is mandatory for some wireless LAN devices.
1196options IEEE80211_DEBUG #enable debugging msgs
1197options IEEE80211_AMPDU_AGE #age frames in AMPDU reorder q's
1198options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support
1199options IEEE80211_SUPPORT_TDMA #enable TDMA support
1200device wlan # 802.11 support
1201device wlan_acl # 802.11 MAC-based access control for AP
1202device wlan_ccmp # 802.11 CCMP support
1203device wlan_tkip # 802.11 TKIP support
1204device wlan_wep # 802.11 WEP support
1205device wlan_xauth # 802.11 WPA or 802.1x authentication for AP
1206device wlan_amrr # 802.11 AMRR TX rate control algorithm
1207device an # Aironet Communications 4500/4800
1208device ath # Atheros AR521x
1209options AH_SUPPORT_AR5416
1210device ath_hal # Atheros Hardware Access Layer
1211#device ath_rate_amrr # Atheros AMRR TX rate control algorithm
1212#device ath_rate_onoe # Atheros Onoe TX rate control algorithm
1213device ath_rate_sample # Atheros Sample TX rate control algorithm
1214options ATH_DEBUG # turn on debugging output (see hw.ath.debug)
1215options ATH_DIAGAPI # diagnostic interface to the HAL
1216options ATH_RXBUF=80 # number of RX buffers to allocate
1217options ATH_TXBUF=400 # number of TX buffers to allocate
1218#device iwl # Intel PRO/Wireless 2100
1219device iwi # Intel PRO/Wireless 2200BG/2915ABG
1220device iwn # Intel WiFi Link 4965/1000/5000/5150/5300/6000/6050
1221device wi # WaveLAN/IEEE, PRISM-II, Spectrum24 802.11DS
1222#device rtw # RealTek 8180
1223#device acx # TI ACX100/ACX111.
1224device xe # Xircom PCMCIA
1225device ral # Ralink Technology 802.11 wireless NIC
1226device wpi
1227
1228# IEEE 802.11 adapter firmware modules
1229
1230# iwifw: Intel PRO/Wireless 2200BG/2225BG/2915ABG firmware
1231# iwnfw: Intel WiFi Link 4965/1000/5000/5150/5300/6000/6050
1232# ralfw: Ralink Technology RT25xx and RT26xx firmware
1233# wpifw: Intel 3945ABG Wireless LAN Controller firmware
1234
1235device iwifw
1236device iwnfw
1237device ralfw
1238device wpifw
1239
1240# Bluetooth Protocols
1241device bluetooth
1242
1243#
1244# ATM related options
1245#
1246# The `en' device provides support for Efficient Networks (ENI)
1247# ENI-155 PCI midway cards, and the Adaptec 155Mbps PCI ATM cards (ANA-59x0).
1248#
1249# atm pseudo-device provides generic atm functions and is required for
1250# atm devices.
1251# NATM enables the netnatm protocol family that can be used to
1252# bypass TCP/IP.
1253#
1254# the current driver supports only PVC operations (no atm-arp, no multicast).
1255# for more details, please read the original documents at
1256# http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html
1257#
1258pseudo-device atm
1259device en
1260options NATM #native ATM
1261
1262# Sound drivers
1263#
1264# The flags of the device tells the device a bit more info about the
1265# device that normally is obtained through the PnP interface.
1266# bit 2..0 secondary DMA channel;
1267# bit 4 set if the board uses two dma channels;
1268# bit 15..8 board type, overrides autodetection; leave it
1269# zero if don't know what to put in (and you don't,
1270# since this is unsupported at the moment...).
1271#
1272# This driver will use the new PnP code if it's available. You might
1273# need PNPBIOS for ISA devices.
1274#
1275# If you have a GUS-MAX card and want to use the CS4231 codec on the
1276# card the drqs for the gus max must be 8 bit (1, 2, or 3).
1277#
1278# If you would like to use the full duplex option on the gus, then define
1279# flags to be the ``read dma channel''.
1280#
1281
1282# Basic sound card support:
1283device pcm
1284# For PnP/PCI sound cards:
1285device "snd_ad1816"
1286device "snd_als4000"
1287device "snd_atiixp"
1288device "snd_cmi"
1289device "snd_cs4281"
1290device "snd_csa"
1291device "snd_ds1"
1292device "snd_emu10k1"
1293device "snd_es137x"
1294device "snd_ess"
1295device "snd_fm801"
b9ad643d 1296device "snd_gusc"
745b8439
SW
1297device "snd_hda"
1298device "snd_ich"
1299device "snd_maestro"
1300device "snd_maestro3"
1301device "snd_mss"
1302device "snd_neomagic"
1303device "snd_sb16"
1304device "snd_sb8"
1305device "snd_sbc"
1306device "snd_solo"
1307device "snd_t4dwave"
1308device "snd_via8233"
1309device "snd_via82c686"
1310device "snd_vibes"
1311# For non-pnp sound cards:
1312device pcm0 at isa? irq 10 drq 1 flags 0x0
1313# USB
1314device "snd_uaudio"
1315
1316#
1317# Miscellaneous hardware:
1318#
1319# bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board
e147701e 1320# ecc: ECC memory controller
745b8439 1321# joy: joystick
d912a10e 1322# nrp: Comtrol Rocketport(ISA) - single card
745b8439
SW
1323# si: Specialix SI/XIO 4-32 port terminal multiplexor
1324# nmdm: nullmodem terminal driver (see nmdm(4))
1325
1326# Notes on the Comtrol Rocketport driver:
1327#
d912a10e 1328# The exact values used for nrp0 depend on how many boards you have
745b8439
SW
1329# in the system. The manufacturer's sample configs are listed as:
1330#
1331# Comtrol Rocketport ISA single card
d912a10e 1332# device nrp0 at isa? port 0x280
745b8439
SW
1333#
1334# If instead you have two ISA cards, one installed at 0x100 and the
1335# second installed at 0x180, then you should add the following to
1336# your kernel configuration file:
1337#
d912a10e
SW
1338# device nrp0 at isa? port 0x100
1339# device nrp1 at isa? port 0x180
745b8439
SW
1340#
1341# For 4 ISA cards, it might be something like this:
1342#
d912a10e
SW
1343# device nrp0 at isa? port 0x180
1344# device nrp1 at isa? port 0x100
1345# device nrp2 at isa? port 0x340
1346# device nrp3 at isa? port 0x240
745b8439
SW
1347#
1348# And for PCI cards, you only need say:
1349#
d912a10e 1350# device nrp
745b8439
SW
1351
1352# Notes on the Specialix SI/XIO driver:
1353# **This is NOT a Specialix supported Driver!**
1354# The host card is memory, not IO mapped.
1355# The Rev 1 host cards use a 64K chunk, on a 32K boundary.
1356# The Rev 2 host cards use a 32K chunk, on a 32K boundary.
1357# The cards can use an IRQ of 11, 12 or 15.
1358
e147701e 1359device ecc
745b8439
SW
1360device joy0 at isa? port IO_GAME
1361device nrp
745b8439
SW
1362device si0 at isa? iomem 0xd0000 irq 12
1363# nullmodem terminal driver
1364device nmdm
1365
1366# The `ahc' device provides support for the Adaptec 274X and 284X
1367# adapters.
1368device ahc
1369
1370# The aic7xxx driver will attempt to use memory mapped I/O for all PCI
1371# controllers that have it configured only if this option is set. Unfortunately,
1372# this doesn't work on some motherboards, which prevents it from being the
1373# default.
1374options AHC_ALLOW_MEMIO
1375
1376# The adw driver will attempt to use memory mapped I/O for all PCI
1377# controllers that have it configured only if this option is set.
1378options ADW_ALLOW_MEMIO
1379
1380#
1381# PCI devices & PCI options:
1382#
1383# The main PCI bus device is `pci'. It provides auto-detection and
1384# configuration support for all devices on the PCI bus, using either
1385# configuration mode defined in the PCI specification.
1386
1387device pci
1388
1389# PCI options
1390#
745b8439
SW
1391options COMPAT_OLDPCI #FreeBSD 2.2 and 3.x compatibility shims
1392
1393# AGP GART support
1394#
1395device agp
1396
1397
1398# The `ahc' device provides support for the Adaptec 29/3940(U)(W)
1399# and motherboard based AIC7870/AIC7880 adapters.
1400options AHC_DEBUG
1401options AHC_DEBUG_OPTS=0xffffffff
1402options AHC_REG_PRETTY_PRINT
1403options AHC_TMODE_ENABLE
1404#
1405# The 'ahd' device provides support for the Adaptec 79xx Ultra320
1406# SCSI adapters. Options are documented in the ahd(4) manpage:
1407options AHD_DEBUG
1408options AHD_DEBUG_OPTS=0xffffffff
1409options AHD_REG_PRETTY_PRINT
1410#options AHD_TMODE_ENABLE=0xff
1411#
1412# The `amd' device provides support for the AMD 53C974 SCSI host
1413# adapter chip as found on devices such as the Tekram DC-390(T).
1414#
1415# The `bge' device provides support for gigabit ethernet adapters
1416# based on the Broadcom BCM570x family of controllers, including the
1417# 3Com 3c996-T, the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41,
1418# and the embedded gigE NICs on Dell PowerEdge 2550 servers.
1419#
1420# The `ncr' device provides support for the NCR 53C810 and 53C825
1421# self-contained SCSI host adapters.
1422#
1423# The `isp' device provides support for the Qlogic ISP 1020, 1040
1424# nd 1040B PCI SCSI host adapters, ISP 1240 Dual Ultra SCSI,
1425# ISP 1080 and 1280 (Dual) Ultra2, ISP 12160 Ultra3 SCSI, as well as
1426# the Qlogic ISP 2100 and ISP 2200 Fibre Channel Host Adapters.
1427#
1428# The `dc' device provides support for PCI fast ethernet adapters
1429# based on the DEC/Intel 21143 and various workalikes including:
1430# the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics
1431# AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On
1432# 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II
1433# and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver
1434# replaces the old al, ax, dm, pn and mx drivers. List of brands:
1435# Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110,
1436# SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX,
1437# LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204,
1438# KNE110TX.
1439#
1440# The `de' device provides support for the Digital Equipment DC21040
1441# self-contained Ethernet adapter.
1442#
1443# The `em' device provides support for the Intel Pro/1000 Family of Gigabit
1444# adapters (82542, 82543, 82544, 82540).
1445#
1446# The `et' device provides support for the Agere ET1310 10/100/1000 PCIe
1447# adapters.
1448#
1449# The `fxp' device provides support for the Intel EtherExpress Pro/100B
1450# PCI Fast Ethernet adapters.
1451#
1452# The 'lge' device provides support for PCI gigabit ethernet adapters
1453# based on the Level 1 LXT1001 NetCellerator chipset. This includes the
1454# D-Link DGE-500SX, SMC TigerCard 1000 (SMC9462SX), and some Addtron cards.
1455#
1456# The 'my' device provides support for the Myson MTD80X and MTD89X PCI
1457# Fast Ethernet adapters.
1458#
1459# The 'nge' device provides support for PCI gigabit ethernet adapters
1460# based on the National Semiconductor DP83820 and DP83821 chipset. This
1461# includes the SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante
1462# FriendlyNet GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the
1463# LinkSys EG1032 and EG1064, the Surecom EP-320G-TX and the Netgear GA622T.
1464#
1465# The 'pcn' device provides support for PCI fast ethernet adapters based
1466# on the AMD Am79c97x chipsets, including the PCnet/FAST, PCnet/FAST+,
1467# PCnet/PRO and PCnet/Home. These were previously handled by the lnc
1468# driver (and still will be if you leave this driver out of the kernel).
1469#
1470# Te 're' device provides support for PCI GigaBit ethernet adapters based
1471# on the RealTek 8169 chipset. It also supports the 8139C+ and is the
1472# preferred driver for that chip.
1473#
1474# The 'rl' device provides support for PCI fast ethernet adapters based
1475# on the RealTek 8129/8139 chipset. Note that the RealTek driver defaults
1476# to using programmed I/O to do register accesses because memory mapped
1477# mode seems to cause severe lockups on SMP hardware. This driver also
1478# supports the Accton EN1207D `Cheetah' adapter, which uses a chip called
1479# the MPX 5030/5038, which is either a RealTek in disguise or a RealTek
1480# workalike. Note that the D-Link DFE-530TX+ uses the RealTek chipset
1481# and is supported by this driver, not the 'vr' driver.
1482#
1483# The 'sf' device provides support for Adaptec Duralink PCI fast
1484# ethernet adapters based on the Adaptec AIC-6915 "starfire" controller.
1485# This includes dual and quad port cards, as well as one 100baseFX card.
1486# Most of these are 64-bit PCI devices, except for one single port
1487# card which is 32-bit.
1488#
1489# The 'ste' device provides support for adapters based on the Sundance
1490# Technologies ST201 PCI fast ethernet controller. This includes the
1491# D-Link DFE-550TX.
1492#
1493# The 'sis' device provides support for adapters based on the Silicon
1494# Integrated Systems SiS 900 and SiS 7016 PCI fast ethernet controller
1495# chips.
1496#
1497# The 'sk' device provides support for the SysKonnect SK-984x series
1498# PCI gigabit ethernet NICs. This includes the SK-9841 and SK-9842
1499# single port cards (single mode and multimode fiber) and the
1500# SK-9843 and SK-9844 dual port cards (also single mode and multimode).
1501# The driver will autodetect the number of ports on the card and
1502# attach each one as a separate network interface.
1503#
1504# The 'ti' device provides support for PCI gigabit ethernet NICs based
1505# on the Alteon Networks Tigon 1 and Tigon 2 chipsets. This includes the
1506# Alteon AceNIC, the 3Com 3c985, the Netgear GA620 and various others.
1507# Note that you will probably want to bump up NMBCLUSTERS a lot to use
1508# this driver.
1509#
1510# The 'tl' device provides support for the Texas Instruments TNETE100
1511# series 'ThunderLAN' cards and integrated ethernet controllers. This
1512# includes several Compaq Netelligent 10/100 cards and the built-in
1513# ethernet controllers in several Compaq Prosignia, Proliant and
1514# Deskpro systems. It also supports several Olicom 10Mbps and 10/100
1515# boards.
1516#
1517# The `tx' device provides support for the SMC 9432 TX, BTX and FTX cards.
1518#
1519# The `txp' device provides support for the 3Com 3cR990 "Typhoon"
1520# 10/100 adapters.
1521#
1522# The `vr' device provides support for various fast ethernet adapters
1523# based on the VIA Technologies VT3043 `Rhine I' and VT86C100A `Rhine II'
1524# chips, including the D-Link DFE530TX (see 'rl' for DFE530TX+), the Hawking
1525# Technologies PN102TX, and the AOpen/Acer ALN-320.
1526#
1527# The `vx' device provides support for the 3Com 3C590 and 3C595
1528# early support
1529#
1530# The `wb' device provides support for various fast ethernet adapters
1531# based on the Winbond W89C840F chip. Note: this is not the same as
1532# the Winbond W89C940F, which is an NE2000 clone.
1533#
1534# The `xl' device provides support for the 3Com 3c900, 3c905 and
1535# 3c905B (Fast) Etherlink XL cards and integrated controllers. This
1536# includes the integrated 3c905B-TX chips in certain Dell Optiplex and
1537# Dell Precision desktop machines and the integrated 3c905-TX chips
1538# in Dell Latitude laptop docking stations.
1539#
1540# The 'bktr' device is a PCI video capture device using the Brooktree
1541# bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a
1542# TV card, eg Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator,
1543# Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo.
1544#
1545# options OVERRIDE_CARD=xxx
1546# options OVERRIDE_TUNER=xxx
1547# options OVERRIDE_MSP=1
1548# options OVERRIDE_DBX=1
1549# These options can be used to override the auto detection
1550# The current values for xxx are found in src/sys/dev/video/bktr/bktr_card.h
1551# Using sysctl(8) run-time overrides on a per-card basis can be made
1552#
1553# options BKTR_SYSTEM_DEFAULT=BROOKTREE_PAL
1554# or
1555# options BKTR_SYSTEM_DEFAULT=BROOKTREE_NTSC
1556# Specifes the default video capture mode.
1557# This is required for Dual Crystal (28&35Mhz) boards where PAL is used
1558# to prevent hangs during initialisation. eg VideoLogic Captivator PCI.
1559#
1560# options BKTR_USE_PLL
1561# PAL or SECAM users who have a 28Mhz crystal (and no 35Mhz crystal)
1562# must enable PLL mode with this option. eg some new Bt878 cards.
1563#
1564# options BKTR_GPIO_ACCESS
1565# This enable IOCTLs which give user level access to the GPIO port.
1566#
1567# options BKTR_NO_MSP_RESET
1568# Prevents the MSP34xx reset. Good if you initialise the MSP in another OS first
1569#
1570# options BKTR_430_FX_MODE
1571# Switch Bt878/879 cards into Intel 430FX chipset compatibility mode.
1572#
1573# options BKTR_SIS_VIA_MODE
1574# Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is
1575# needed for some old SiS and VIA chipset motherboards.
1576# This also allows Bt878/879 chips to work on old OPTi (<1997) chipset
1577# motherboards and motherboards with bad or incomplete PCI 2.1 support.
1578# As a rough guess, old = before 1998
1579#
1580# options BKTR_NEW_MSP34XX_DRIVER
1581# Use new, more complete initialization scheme for the msp34* soundchip.
1582# Should fix stereo autodetection if the old driver does only output
1583# mono sound.
1584#
1585# options BKTR_OVERRIDE_CARD=xxx
1586# options BKTR_OVERRIDE_DBX=xxx
1587# options BKTR_OVERRIDE_MSP=xxx
1588# options BKTR_OVERRIDE_TUNER=xxx
1589# These options can be used to select a specific device, regardless of
1590# the autodetection and i2c device checks (see comments in bktr_card.c).
1591#
1592device ahc # AHA2940 and onboard AIC7xxx devices
1593device ahd # AIC79xx devices
1594device amd # AMD 53C974 (Tekram DC-390(T))
1595device isp # Qlogic family
1596device ispfw # Firmware for QLogic HBAs
1597device mpt # LSI '909 FC adapters
1598device mps # LSI-Logic MPT-Fusion 2
1599device ncr # NCR/Symbios Logic
1600device sym # NCR/Symbios Logic (newer chipsets)
1601device trm # Tekram DC395U/UW/F and DC315U
1602#
1603# Options for ISP
1604#
1605# ISP_TARGET_MODE - enable target mode operation
1606#options ISP_TARGET_MODE=1
1607
47a69c3f 1608# Options used in dev/disk/sym/ (Symbios SCSI driver).
745b8439
SW
1609#options SYM_SETUP_LP_PROBE_MAP #-Low Priority Probe Map (bits)
1610 # Allows the ncr to take precedence
1611 # 1 (1<<0) -> 810a, 860
1612 # 2 (1<<1) -> 825a, 875, 885, 895
1613 # 4 (1<<2) -> 895a, 896, 1510d
1614#options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885
1615 # disabled:0 (default), enabled:1
1616#options SYM_SETUP_PCI_PARITY #-PCI parity checking
1617 # disabled:0, enabled:1 (default)
1618#options SYM_SETUP_MAX_LUN #-Number of LUNs supported
1619 # default:8, range:[1..64]
1620
1621
1622# MII bus support is required for some PCI 10/100 ethernet NICs,
1623# namely those which use MII-compliant transceivers or implement
1624# transceiver control interfaces that operate like an MII. Adding
1625# "device miibus0" to the kernel config pulls in support for
1626# the generic miibus API and all of the PHY drivers, including a
1627# generic one for PHYs that aren't specifically handled by an
1628# individual driver.
1629device miibus
1630
1631# PCI Ethernet NICs that use the common MII bus controller code.
1632device ae # Attansic/Atheros L2 Fast Ethernet
1633device alc # Atheros AR8131/AR8132
1634device ale # Atheros AR8121/AR8113/AR8114
1635device age # Attansic/Atheros L1 Gigabit Ethernet
1636device bce # Broadcom NetXtreme II Gigabit Ethernet
1637device bfe # Broadcom BCM440x 10/100 Ethernet
1638device dc # DEC/Intel 21143 and various workalikes
1639device fxp # Intel EtherExpress PRO/100B (82557, 82558)
1640device my # Myson Fast Ethernet (MTD80X, MTD89X)
1641device pcn # AMD Am79C97x PCI 10/100 NICs
1642device re # RealTek 8139C+/8169
1643device rl # RealTek 8129/8139
1644device sbsh # Granch SBNI16 SHDSL modem
1645device sf # Adaptec AIC-6915 (``Starfire'')
1646device sis # Silicon Integrated Systems SiS 900/SiS 7016
1647device ste # Sundance ST201 (D-Link DFE-550TX)
1648device tl # Texas Instruments ThunderLAN
1649device tx # SMC EtherPower II (83c17x ``EPIC'')
1650device vge # VIA 612x GigE
1651device vr # VIA Rhine, Rhine II
1652device wb # Winbond W89C840F
1653device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
1654
1655# PCI Ethernet NICs.
1656device de # DEC/Intel DC21x4x (``Tulip'')
1657device txp # 3Com 3cR990 (``Typhoon'')
1658device vx # 3Com 3c590, 3c595 (``Vortex'')
1659
1660# Gigabit Ethernet NICs.
1661device bge # Broadcom BCM570x (``Tigon III'')
1662device em # Intel Pro/1000 (8254x,8257x)
1663 # Requires ig_hal
1664device emx # Intel Pro/1000 (8257{1,2,3,4})
1665 # Requires ig_hal
1666device ig_hal # Intel Pro/1000 hardware abstraction layer
1667device et # Agere ET1310 10/100/1000 Ethernet
1668device lge # Level 1 LXT1001 (``Mercury'')
1669device mxge # Myricom Myri-10G 10GbE NIC
1670device nfe # nVidia nForce2/3 MCP04/51/55 CK804
1671device nge # NatSemi DP83820 and DP83821
1672device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
1673device ti # Alteon (``Tigon I'', ``Tigon II'')
1674device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
1675device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
1676device jme # JMicron Gigabit/Fast Ethernet
1677
1678# Brooktree driver has been ported to the new I2C framework. Thus,
1679# you'll need to have the following 3 lines in the kernel config.
1680# device smbus
1681# device iicbus
1682# device iicbb
1683# The iic and smb devices are only needed if you want to control other
1684# I2C slaves connected to the external connector of some cards.
1685#
1686device bktr
1687options BKTR_NEW_MSP34XX_DRIVER
1688
1689# WinTV PVR-250/350 driver
1690device cxm
1691
1692#
1693# PCCARD/PCMCIA
1694#
1695# pccard: pccard slots
1696# cardbus/cbb: cardbus bridge
1697device pccard
1698device cardbus
1699device cbb
1700
1701# For older notebooks that signal a powerfail condition (external
1702# power supply dropped, or battery state low) by issuing an NMI:
1703
1704options POWERFAIL_NMI # make it beep instead of panicing
1705
1706#
1707# MMC/SD
1708#
1709# mmc MMC/SD bus
1710# mmcsd MMC/SD memory card
1711# sdhci Generic PCI SD Host Controller
1712#
1713device mmc
1714device mmcsd
1715device sdhci
1716
1717#
1718# SMB bus
1719#
1720# System Management Bus support is provided by the 'smbus' device.
1721# Access to the SMBus device is via the 'smb' device (/dev/smb*),
1722# which is a child of the 'smbus' device.
1723#
1724# Supported devices:
1725# smb standard io through /dev/smb*
1726#
1727# Supported SMB interfaces:
1728# iicsmb I2C to SMB bridge with any iicbus interface
1729# bktr brooktree848 I2C hardware interface
1730# intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit
1731# alpm Acer Aladdin-IV/V/Pro2 Power Management Unit
1732# ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA)
1733# viapm VIA VT82C586B,596,686A and VT8233 SMBus controllers
1734# amdpm AMD 756 Power Management Unit
1735# amdsmb AMD 8111 SMBus 2.0 Controller
1736#
1737device smbus # Bus support, required for smb below.
1738
1739device intpm
1740device alpm
1741device ichsmb
1742device viapm
1743device amdpm
1744device amdsmb
1745
1746device smb
1747
1748#
1749# I2C Bus
1750#
1751# Philips i2c bus support is provided by the `iicbus' device.
1752#
1753# Supported devices:
1754# ic i2c network interface
1755# iic i2c standard io
1756# iicsmb i2c to smb bridge. Allow i2c i/o with smb commands.
1757#
1758# Supported interfaces:
1759# pcf Philips PCF8584 ISA-bus controller
1760# bktr brooktree848 I2C software interface
1761#
1762# Other:
1763# iicbb generic I2C bit-banging code (needed by lpbb, bktr)
1764#
1765device iicbus # Bus support, required for ic/iic/iicsmb below.
1766device iicbb
1767
1768device ic
1769device iic
1770device iicsmb # smb over i2c bridge
1771
1772device pcf0 at isa? port 0x320 irq 5
1773
1774# Intel Core and newer CPUs on-die digital thermal sensor support
1775device coretemp
1776
1777# AMD Family 0Fh, 10h and 11h temperature sensors
1778device kate
1779device km
1780
1781# ThinkPad Active Protection System accelerometer
1782device aps0 at isa? port 0x1600
1783
1784# HW monitoring devices lm(4), it(4) and nsclpcsio.
1785device lm0 at isa? port 0x290
1786device it0 at isa? port 0x290
1787device it1 at isa? port 0xc00
1788device it2 at isa? port 0xd00
1789device it3 at isa? port 0x228
1790device nsclpcsio0 at isa? port 0x2e
1791device nsclpcsio1 at isa? port 0x4e
1792device wbsio0 at isa? port 0x2e
1793device wbsio1 at isa? port 0x4e
1794device lm#3 at wbsio?
1795device uguru0 at isa? port 0xe0 # ABIT uGuru
1796
745b8439
SW
1797# Parallel-Port Bus
1798#
1799# Parallel port bus support is provided by the `ppbus' device.
1800# Multiple devices may be attached to the parallel port, devices
1801# are automatically probed and attached when found.
1802#
1803# Supported devices:
1804# vpo Iomega Zip Drive
1805# Requires SCSI disk support ('scbus' and 'da'); the best
1806# performance is achieved with ports in EPP 1.9 mode.
1807# lpt Parallel Printer
1808# plip Parallel network interface
1809# ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O
1810# pps Pulse per second Timing Interface
1811# lpbb Philips official parallel port I2C bit-banging interface
1812#
1813# Supported interfaces:
1814# ppc ISA-bus parallel port interfaces.
1815#
1816
1817options PPC_PROBE_CHIPSET # Enable chipset specific detection
1818 # (see flags in ppc(4))
1819options DEBUG_1284 # IEEE1284 signaling protocol debug
1820options PERIPH_1284 # Makes your computer act as a IEEE1284
1821 # compliant peripheral
1822options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices
1823options VP0_DEBUG # ZIP/ZIP+ debug
1824options LPT_DEBUG # Printer driver debug
1825options PPC_DEBUG=2 # Parallel chipset level debug
1826options PLIP_DEBUG # Parallel network IP interface debug
1827options PCFCLOCK_VERBOSE # Verbose pcfclock driver
1828options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10)
1829
1830device ppc0 at isa? irq 7
1831device ppbus
1832device vpo
1833device lpt
1834device plip
1835device ppi
1836device pps
1837device lpbb
1838device pcfclock
1839
1840# Kernel BOOTP support
1841
1842options BOOTP # Use BOOTP to obtain IP address/hostname
1843options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info
1844options BOOTP_NFSV3 # Use NFS v3 to NFS mount root
1845options BOOTP_COMPAT # Workaround for broken bootp daemons.
1846options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP
1847
1848#
1849# Add tie-ins for a hardware watchdog. This only enable the hooks;
1850# the user must still supply the actual driver.
1851#
1852options HW_WDOG
1853
1854#
1855# Set the number of PV entries per process. Increasing this can
1856# stop panics related to heavy use of shared memory. However, that can
1857# (combined with large amounts of physical memory) cause panics at
1858# boot time due the kernel running out of VM space.
1859#
1860# If you're tweaking this, you might also want to increase the sysctls
1861# "vm.v_free_min", "vm.v_free_reserved", and "vm.v_free_target".
1862#
1863# The value below is the one more than the default.
1864#
1865options PMAP_SHPGPERPROC=201
1866
1867#
1868# Disable swapping. This option removes all code which actually performs
1869# swapping, so it's not possible to turn it back on at run-time.
1870#
1871# This is sometimes usable for systems which don't have any swap space
1872# (see also sysctls "vm.defer_swapspace_pageouts" and
1873# "vm.disable_swapspace_pageouts")
1874#
1875#options NO_SWAPPING
1876
1877# Set the size of the buffer cache KVM reservation, in buffers. This is
1878# scaled by approximately 16384 bytes. The system will auto-size the buffer
1879# cache if this option is not specified.
1880#
1881options NBUF=512
1882
1883# Set the size of the mbuf KVM reservation, in clusters. This is scaled
1884# by approximately 2048 bytes. The system will auto-size the mbuf area
1885# to (512 + maxusers*16) if this option is not specified.
1886# maxusers is in turn computed at boot time depending on available memory
1887# or set to the value specified by "options MAXUSERS=x" (x=0 means
1888# autoscaling).
1889# So, to take advantage of autoscaling, you have to remove both
1890# NMBCLUSTERS and MAXUSERS (and NMBUFS) from your kernel config.
1891#
1892options NMBCLUSTERS=1024
1893
1894# Set the number of mbufs available in the system. Each mbuf
1895# consumes 256 bytes. The system will autosize this (to 4 times
1896# the number of NMBCLUSTERS, depending on other constraints)
1897# if this option is not specified.
1898#
1899options NMBUFS=4096
1900
1901# Tune the buffer cache maximum KVA reservation, in bytes. The maximum is
1902# usually capped at 200 MB, effecting machines with > 1GB of ram. Note
1903# that the buffer cache only really governs write buffering and disk block
1904# translations. The VM page cache is our primary disk cache and is not
1905# effected by the size of the buffer cache.
1906#
1907options VM_BCACHE_SIZE_MAX="(100*1024*1024)"
1908
1909# Tune the swap zone KVA reservation, in bytes. The default is typically
1910# 70 MB, giving the system the ability to manage a maximum of 28GB worth
1911# of swapped out data.
1912#
1913options VM_SWZONE_SIZE_MAX="(50*1024*1024)"
1914
1915#
1916# Enable extra debugging code for locks. This stores the filename and
1917# line of whatever acquired the lock in the lock itself, and change a
1918# number of function calls to pass around the relevant data. This is
1919# not at all useful unless you are debugging lock code. Also note
1920# that it is likely to break e.g. fstat(1) unless you recompile your
1921# userland with -DDEBUG_LOCKS as well.
1922#
9ec899f4
SW
1923# DEBUG_LOCKS_LATENCY adds a sysctl to add a forced latency loop
1924# (count to N) in front of any spinlock or gettoken.
1925#
745b8439 1926options DEBUG_LOCKS
9ec899f4 1927options DEBUG_LOCKS_LATENCY
745b8439
SW
1928
1929# Set the amount of time (in seconds) the system will wait before
1930# rebooting automatically when a kernel panic occurs. If set to (-1),
1931# the system will wait indefinitely until a key is pressed on the
1932# console.
1933options PANIC_REBOOT_WAIT_TIME=16
1934
1935# Attempt to bypass the buffer cache and put data directly into the
1936# userland buffer for read operation when O_DIRECT flag is set on the
1937# file. Both offset and length of the read operation must be
1938# multiples of the physical media sector size.
1939#
1940options DIRECTIO
1941
1942# Specify a lower limit for the number of swap I/O buffers. They are
1943# (among other things) used when bypassing the buffer cache due to
1944# DIRECTIO kernel option enabled and O_DIRECT flag set on file.
1945#
1946#options NSWBUF_MIN=120
1947
1948# The 'asr' driver provides support for current DPT/Adaptec SCSI RAID
1949# controllers (SmartRAID V and VI and later).
1950# These controllers require the CAM infrastructure.
1951#
1952device asr
1953
1954# The 'dpt' driver provides support for DPT controllers (http://www.dpt.com/).
1955# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
1956# The DPT controllers are commonly re-licensed under other brand-names -
1957# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
1958# Compaq are actually DPT controllers.
1959#
1960# See src/sys/dev/raid/dpt for debugging and other subtle options.
1961# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
1962# instruments are enabled. The tools in
1963# /usr/sbin/dpt_* assume these to be enabled.
1964# DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT.
1965# If you ant the driver to handle timeouts, enable
1966# this option. If your system is very busy, this
1967# option will create more trouble than solve.
1968# DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to
1969# wait when timing out with the above option.
47a69c3f 1970# DPT_DEBUG_xxxx These are controllable from sys/dev/raid/dpt/dpt.h
745b8439
SW
1971# DPT_LOST_IRQ When enabled, will try, once per second, to catch
1972# any interrupt that got lost. Seems to help in some
1973# DPT-firmware/Motherboard combinations. Minimal
1974# cost, great benefit.
1975# DPT_RESET_HBA Make "reset" actually reset the controller
1976# instead of fudging it. Only enable this if you
1977# are 100% certain you need it.
1978
1979device dpt
1980
1981# DPT options
1982#!CAM# options DPT_MEASURE_PERFORMANCE
1983#!CAM# options DPT_HANDLE_TIMEOUTS
1984options DPT_TIMEOUT_FACTOR=4
1985options DPT_LOST_IRQ
1986options DPT_RESET_HBA
1987
1988#
1989# Compaq "CISS" RAID controllers (SmartRAID 5* series)
1990# These controllers have a SCSI-like interface, and require the
1991# CAM infrastructure.
1992#
1993device ciss
1994
1995#
1996# Intel Integrated RAID controllers.
1997# This driver is supported and maintained by
1998# "Leubner, Achim" <Achim_Leubner@adaptec.com>.
1999#
2000device iir
2001
2002#
2003# Mylex AcceleRAID and eXtremeRAID controllers with v6 and later
2004# firmware. These controllers have a SCSI-like interface, and require
2005# the CAM infrastructure.
2006#
2007device mly
2008
2009# USB support
2010# UHCI controller
2011device uhci
2012# OHCI controller
2013device ohci
2014# EHCI controller
2015device ehci
2016# General USB code (mandatory for USB)
2017device usb
2018#
2019# USB Bluetooth
2020device ubt
2021# Fm Radio
2022device ufm
2023# Generic USB device driver
2024device ugen
2025# Human Interface Device (anything with buttons and dials)
2026device uhid
2027# USB keyboard
2028device ukbd
2029# USB printer
2030device ulpt
2031# USB Iomega Zip 100 Drive (Requires scbus and da)
2032device umass
2033# USB modem support
2034device umodem
2035# USB mouse
2036device ums
2037# USB Rio (MP3 Player)
2038device urio
2039# USB scanners
2040device uscanner
2041# USB com devices
2042device moscom
2043device uark
2044device ubsa
2045device uchcom
2046device ucom
2047device uftdi
2048device ugensa
2049device umct
2050device uplcom
2051device uslcom
2052device uticom
2053device uvisor
2054device uvscom
2055
2056#
2057# ADMtek USB ethernet. Supports the LinkSys USB100TX,
2058# the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX
2059# and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus
2060# eval board.
2061device aue
2062#
2063# ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the
2064# LinkSys USB200M and various other adapters.
2065device axe
2066#
2067# CATC USB-EL1201A USB ethernet. Supports the CATC Netmate
2068# and Netmate II, and the Belkin F5U111.
2069device cue
2070#
2071# Kawasaki LSI ethernet. Supports the LinkSys USB10T,
2072# Entrega USB-NET-E45, Peracom Ethernet Adapter, the
2073# 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T,
2074# the Netgear EA101, the D-Link DSB-650, the SMC 2102USB
2075# and 2104USB, and the Corega USB-T.
2076device kue
2077#
a700a71b
SW
2078# USB CDC ethernet. Supports the LG P-500 smartphone.
2079device lgue
2080#
745b8439
SW
2081# RealTek 8150 based USB ethernet device:
2082# Melco LUA-KTX
2083# GREEN HOUSE GH-USB100B
2084# Billionton ThumbLAN USBKR2-100B
2085device rue
2086
2087# USB wireless NICs, requires wlan_amrr
2088#
2089# Ralink Technology RT2501USB/RT2601USB
2090#device rum
2091#
2092# Ralink Technology RT2500USB
2093#device ural
2094
2095# debugging options for the USB subsystem
2096#
2097options USB_DEBUG
2098
2099# options for ukbd:
2100options UKBD_DFLT_KEYMAP # specify the built-in keymap
2101makeoptions UKBD_DFLT_KEYMAP=it.iso
2102
2103# Firewire support
2104device firewire # Firewire bus code
2105device sbp # SCSI over Firewire (Requires scbus and da)
2106device fwe # Ethernet over Firewire (non-standard!)
2107
2108# dcons support (Dumb Console Device)
2109device dcons # dumb console driver
2110device dcons_crom # FireWire attachment
2111options DCONS_BUF_SIZE=16384 # buffer size
2112options DCONS_POLL_HZ=100 # polling rate
2113options DCONS_FORCE_CONSOLE=1 # force to be the primary console
2114options DCONS_FORCE_GDB=1 # force to be the gdb device
2115
2116#####################################################################
2117# crypto subsystem
2118#
2119# This is a port of the openbsd crypto framework. Include this when
2120# configuring IPsec and when you have a h/w crypto device to accelerate
2121# user applications that link to openssl.
2122#
2123# Drivers are ports from openbsd with some simple enhancements that have
2124# been fed back to openbsd (and hopefully will be included).
2125
2126pseudo-device crypto # core crypto support
2127pseudo-device cryptodev # /dev/crypto for access to h/w
2128
2129device rndtest # FIPS 140-2 entropy tester
2130
2131device hifn # Hifn 7951, 7781, etc.
2132options HIFN_DEBUG # enable debugging support: hw.hifn.debug
2133#options HIFN_NO_RNG # for devices without RNG
2134options HIFN_RNDTEST # enable rndtest support
2135
25638cf4
SW
2136device safe # SafeNet 1141
2137options SAFE_DEBUG # enable debugging support: hw.safe.debug
8690ff8f 2138#options SAFE_NO_RNG # for devices without RNG
25638cf4
SW
2139options SAFE_RNDTEST # enable rndtest support
2140
745b8439
SW
2141device ubsec # Broadcom 5501, 5601, 58xx
2142options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug
2143#options UBSEC_NO_RNG # for devices without RNG
2144options UBSEC_RNDTEST # enable rndtest support
2145
2146device aesni # hardware crypto/RNG for AES-NI
2147device padlock # hardware crypto/RNG for VIA C3/C7/Eden
c5761ad0 2148device rdrand # hardware RNG for RdRand
745b8439
SW
2149
2150#
2151# ACPI support using the Intel ACPI Component Architecture reference
2152# implementation.
2153#
2154# ACPI_DEBUG enables the use of the debug.acpi.level and debug.acpi.layer
2155# kernel environment variables to select initial debugging levels for the
2156# Intel ACPICA code.
2157#
2158# Note that building ACPI into the kernel is deprecated; the module is
2159# normally loaded automatically by the loader.
2160
2161device acpi
2162options ACPI_DEBUG
2163
554257bc
SW
2164# ACPI WMI Mapping driver
2165device acpi_wmi
2166
745b8439
SW
2167# ACPI Asus Extras (LCD backlight/brightness, video output, etc.)
2168device acpi_asus
2169
2170# ACPI Fujitsu Extras (Buttons)
2171device acpi_fujitsu
2172
2173# ACPI extras driver for HP laptops
554257bc 2174device acpi_hp
745b8439
SW
2175
2176# ACPI Panasonic Extras (LCD backlight/brightness, video output, etc.)
2177device acpi_panasonic
2178
2179# ACPI Sony extra (LCD brightness)
2180device acpi_sony
2181
2182# ACPI extras driver for ThinkPad laptops
2183device acpi_thinkpad
2184
2185# ACPI Toshiba Extras (LCD backlight/brightness, video output, etc.)
2186device acpi_toshiba
2187
2188# ACPI Video Extensions (LCD backlight/brightness, video output, etc.)
2189device acpi_video
2190
2191device aibs # ASUSTeK AI Booster (ACPI ASOC ATK0110)
2192
2193# DRM options:
2194# drm: General DRM code
2195# i915drm: Intel i830, i845, i915, i945, i965, G33/35
2196# mach64drm: ATI Mach64 cards - Rage and 3D Rage series
2197# mgadrm: AGP Matrox G200, G400, G450, G550
2198# r128drm: ATI Rage 128 cards
2199# radeondrm: ATI Radeon cards
2200# savagedrm: Savage cards
2201# sisdrm: Sis cards
2202# tdfxdrm: 3dfx Voodoo 3/4/5 and Banshee
2203#
2204# DRM_DEBUG: include debug printfs, very slow
2205#
2206# DRM requires AGP in the kernel.
2207
2208device drm
2209device "i915drm"
2210device "mach64drm"
2211device mgadrm
2212device "r128drm"
2213device radeondrm
2214device savagedrm
2215device sisdrm
2216device tdfxdrm
2217
2218options DRM_DEBUG
2219options DRM_LINUX
2220
2221#
2222# Misc devices
2223#
2224device cmx # Omnikey CardMan 4040 smartcard reader
2225device gpio # Enable support for the gpio framework
ace1ab86 2226device ichwd # Intel ICH watchdog interrupt timer
ea2c6782 2227device tbridge # regression testing
745b8439
SW
2228
2229#
2230# Embedded system options:
2231#
2232# An embedded system might want to run something other than init.
2233options INIT_PATH="/sbin/init:/sbin/oinit"
2234
2235# Debug options
2236options BUS_DEBUG # enable newbus debugging
2237options RSS_DEBUG # enable RSS (Receive Side Scaling) debugging
2238
2239# Record the program counter of the code interrupted by the statistics
2240# clock interrupt. Use pctrack(8) to dump this information.
2241options DEBUG_PCTRACK
2242
2243# More undocumented options for linting.
2244# Note that documenting these are not considered an affront.
2245
2246#options ACPI_NO_SEMAPHORES
2247options AHC_DUMP_EEPROM
2248#options BKTR_ALLOC_PAGES=xxx
2249options CAM_DEBUG_DELAY
2250options CLUSTERDEBUG
2251#options COMPAT_LINUX
2252options COMPAT_SUNOS
2253options DEBUG
2254options DEBUG_CRIT_SECTIONS
2255options DEBUG_INTERRUPTS
2256#options DISABLE_PSE
2257options BCE_DEBUG
745b8439
SW
2258options EMX_RSS_DEBUG
2259options JME_RSS_DEBUG
2260#options ED_NO_MIIBUS
2261options ENABLE_ALART
2262options FB_DEBUG=2
2263options FB_INSTALL_CDEV
745b8439
SW
2264options I586_PMC_GUPROF=0x70000
2265#options IEEE80211_DEBUG_REFCNT
2266options IEEE80211_SUPPORT_SUPERG
2267options KBDIO_DEBUG=10
2268options KBD_MAXRETRY=4
2269options KBD_MAXWAIT=6
2270options KBD_RESETDELAY=201
2271#options KERN_TIMESTAMP
2272options KEY
2273#options LINPROCFS
2274options LOCKF_DEBUG
745b8439
SW
2275#options MAXFILES=xxx
2276options MBUF_DEBUG
745b8439
SW
2277options PANIC_DEBUG
2278options PMAP_DEBUG
2279options PSM_DEBUG=4
2280options SCSI_NCR_DEBUG
2281options SCSI_NCR_MAX_SYNC=10000
2282options SCSI_NCR_MAX_WIDE=1
2283options SCSI_NCR_MYADDR=7
2284options SHOW_BUSYBUFS # List buffers that prevent root unmount
2285options SI_DEBUG
603198e6 2286options SLAB_DEBUG
745b8439
SW
2287options SLIP_IFF_OPTS
2288options SOCKBUF_DEBUG
2289options TDMA_BINTVAL_DEFAULT=5
2290options TDMA_SLOTCNT_DEFAULT=2
2291options TDMA_SLOTLEN_DEFAULT=10*1000
2292options TDMA_TXRATE_11A_DEFAULT=2*24
2293options TDMA_TXRATE_11B_DEFAULT=2*11
2294options TDMA_TXRATE_11G_DEFAULT=2*24
2295options TDMA_TXRATE_11NA_DEFAULT="(4|IEEE80211_RATE_MCS)"
2296options TDMA_TXRATE_11NG_DEFAULT="(4|IEEE80211_RATE_MCS)"
2297options TDMA_TXRATE_HALF_DEFAULT=2*12
2298options TDMA_TXRATE_QUARTER_DEFAULT=2*6
2299options TDMA_TXRATE_TURBO_DEFAULT=2*24
2300#options TIMER_FREQ="((14318182+6)/12)"
2301options VFS_BIO_DEBUG
603198e6 2302options VM_PAGE_DEBUG
745b8439
SW
2303options XBONEHACK
2304
2305options KTR
243308a2
SW
2306options KTR_ALL
2307options KTR_ENTRIES=1024
2308options KTR_VERBOSE=1
745b8439 2309#options KTR_CTXSW
243308a2 2310#options KTR_DMCRYPT
d912a10e 2311#options KTR_DSCHED_BFQ
745b8439
SW
2312#options KTR_ETHERNET
2313#options KTR_HAMMER
243308a2 2314#options KTR_IFQ
745b8439
SW
2315#options KTR_IF_BGE
2316#options KTR_IF_EM
2317#options KTR_IF_EMX
2318#options KTR_IF_START
745b8439
SW
2319#options KTR_IPIQ
2320#options KTR_KERNENTRY
2321#options KTR_MEMORY
2322#options KTR_POLLING
2323#options KTR_SERIALIZER
2324#options KTR_SPIN_CONTENTION
2325#options KTR_TESTLOG
2326#options KTR_TOKENS
95a12b8b 2327#options KTR_TSLEEP
745b8439 2328#options KTR_USB_MEMORY
745b8439
SW
2329
2330# ALTQ
2331options ALTQ #alternate queueing
2332options ALTQ_CBQ #class based queueing
2333options ALTQ_RED #random early detection
2334options ALTQ_RIO #triple red for diffserv (needs RED)
2335options ALTQ_HFSC #hierarchical fair service curve
2336options ALTQ_PRIQ #priority queue
2337options ALTQ_FAIRQ #fair queue
2338#options ALTQ_NOPCC #don't use processor cycle counter
2339options ALTQ_DEBUG #for debugging
2340# you might want to set kernel timer to 1kHz if you use CBQ,
2341# especially with 100baseT
2342#options HZ=1000
2343
2344# SCTP
2345options SCTP
2346options SCTP_DEBUG
2347options SCTP_USE_ADLER32
2348options SCTP_HIGH_SPEED
2349options SCTP_STAT_LOGGING
2350options SCTP_CWND_LOGGING
2351options SCTP_BLK_LOGGING
2352options SCTP_STR_LOGGING
2353options SCTP_FR_LOGGING
2354options SCTP_MAP_LOGGING
2355
2356# DSCHED stuff
b3fc94f8
SW
2357options DSCHED_AS
2358options DSCHED_BFQ
745b8439
SW
2359options DSCHED_FQ
2360
2361# WATCHDOG
2362options WATCHDOG_ENABLE # Enable watchdog support framework
2363options WDOG_DISABLE_ON_PANIC # Automatically disable watchdogs on panic
2364
2365# LED
2366options ERROR_LED_ON_PANIC # If an error led is present, light it up on panic