Rework and expand the algorithms in JSCAN, part 2/?.
[dragonfly.git] / etc / defaults / make.conf
CommitLineData
984263bc 1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $
29d48e65 2# $DragonFly: src/etc/defaults/make.conf,v 1.14 2005/09/05 15:36:34 corecode Exp $
984263bc
MD
3#
4# NOTE: Please would any committer updating this file also update the
5# make.conf(5) manual page, if necessary, which is located in
6# src/share/man/man5/make.conf.5.
7#
8# This file, if present, will be read by make (see /usr/share/mk/sys.mk).
9# It allows you to override macro definitions to make without changing
10# your source tree, or anything the source tree installs.
11#
12# This file must be in valid Makefile syntax.
13#
14# You have to find the things you can put here in the Makefiles and
15# documentation of the source tree.
16#
17#
18# The CPUTYPE variable controls which processor should be targeted for
19# generated code. This controls processor-specific optimizations in
20# certain code (currently only OpenSSL) as well as modifying the value
21# of CFLAGS to contain the appropriate optimization directive to gcc.
22# The automatic setting of CFLAGS may be overridden using the
23# NO_CPU_CFLAGS variable below.
24# Currently the following CPU types are recognized:
25# Intel x86 architecture:
26# (AMD CPUs) k7 k6-2 k6 k5
27# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386
984263bc
MD
28#
29# If you experience any problems after setting this flag, please unset
30# it again before submitting a bug report or attempting to modify code.
31# It may be that certain types of software will become unstable after being
32# compiled with processor-specific (or higher - see below) optimization flags.
33# If in doubt, do not set CPUTYPE or CFLAGS to non-default values.
34#
35#CPUTYPE=i686
36#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically
37#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically
38#
dfa77fe6
MD
39# The CCVER variable controls which GCC-version to use by default. It
40# should be set using ?= so as not to interfere with CCVER overrides from
41# userland or the buildworld. We currently recommend that an override NOT
42# be set in /etc/make.conf and that gcc 3.4 not yet be used to build the boot
43# blocks, boot loader, or the kernel.
44#
29d48e65
SS
45# CCVER?=gcc34 # (use GCC 3.4, default)
46# CCVER?=gcc40 # (use GCC 4.0, experimental, only available
47# # if WANT_GCC40 set)
48#
49#
50# Build gcc40 with world. This won't make gcc40 the default compiler
51#
52#WANT_GCC40=yes
dfa77fe6
MD
53#
54#
984263bc
MD
55# CFLAGS controls the compiler settings used when compiling C code.
56# Note that optimization settings above -O (-O2, ...) are not recommended
57# or supported for compiling the world or the kernel - please revert any
58# nonstandard optimization settings to "-O" before submitting bug reports
59# to the developers.
984263bc
MD
60#
61#CFLAGS= -O -pipe
62#
63# CXXFLAGS controls the compiler settings used when compiling C++ code.
64# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish
65# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "="
66# alone will remove the often needed contents of CFLAGS from CXXFLAGS.
67#
68#CXXFLAGS+= -fmemoize-lookups -fsave-memoized
69#
70# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested
71# for use in developing FreeBSD and testing changes. They can be used by
72# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not
73# included here due to compiler bugs, e.g., mkdir()'s mode_t argument.
74#
75BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \
76 -Wcast-qual -Wchar-subscripts -Winline \
77 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
78 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings
79#
80# WARNS_WERROR causes -Werror to be added when WARNS is in effect.
81#
82#WARNS_WERROR= yes
83#
84# To compile just the kernel with special optimizations, you should use
85# this instead of CFLAGS (which is not applicable to kernel builds anyway).
86# There is very little to gain by using higher optimization levels, and doing
87# so can cause problems.
88#
89#COPTFLAGS= -O -pipe
90#
bb4f1f7e
JR
91# Strip the file before installing. Setting this to nothing will keep
92# the debugging symbols in the installed files.
93#STRIP= -s
94#
984263bc
MD
95# Compare before install
96#INSTALL=install -C
97#
98# To enable installing suidperl with the setuid bit turned on
99#ENABLE_SUIDPERL= true
100#
101# To build ppp with normal permissions
102#PPP_NOSUID= true
103#
104# To enable installing ssh(1) with the setuid bit turned on
105#ENABLE_SUID_SSH= true
106#
107# To avoid building various parts of the base system:
108#NO_CVS= true # do not build CVS
109#NO_BIND= true # do not build BIND
110#NO_FORTRAN= true # do not build g77 and related libraries
111#NO_I4B= true # do not build isdn4bsd package
112#NO_IPFILTER= true # do not build IP Filter package
113#NO_LPR= true # do not build lpr and related programs
114#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector
115#NO_MODULES= true # do not build modules with the kernel
116#NO_OBJC= true # do not build Objective C support
117#NO_OPENSSH= true # do not build OpenSSH
118#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH)
2f62a144 119#NO_PKGTOOLS= true # do not build included package tools (for pkgsrc)
984263bc
MD
120#NO_SENDMAIL= true # do not build sendmail and related programs
121#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs
984263bc
MD
122#NO_X= true # do not compile in XWindows support (e.g. doscmd)
123#NOCRYPT= true # do not build any crypto code
124#NOGAMES= true # do not build games (games/ subdir)
125#NOINFO= true # do not make or install info files
126#NOLIBC_R= true # do not build libc_r (re-entrant version of libc)
127#NOMAN= true # do not build manual pages
984263bc 128#NOPROFILE= true # Avoid compiling profiled libraries
984263bc 129#NOSHARE= true # do not go into the share subdir
984263bc
MD
130#
131# To build sys/modules when building the world (our old way of doing things)
132#MODULES_WITH_WORLD=true # do not build modules when building kernel
133#
134# The list of modules to build instead of all of them.
fdd814c0 135#MODULES_OVERRIDE= emulation/linux net/ipfw
984263bc
MD
136#
137# The following controls building optional IDEA code in libcrypto and
138# certain ports. Patents are involved - you must not use this unless
139# you either have a license or fall within patent 'fair use'
140# provisions.
141#
142# *** It is YOUR RESPONSIBILITY to determine if you can use this! ***
143#
144# IDEA is patented in the USA and many European countries - thought to
145# be OK to use for any non-commercial use. This is optional.
146#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption)
147#
148# To avoid running MAKEDEV all on /dev during install:
149#NO_MAKEDEV= true
150#
151# If you do not want unformatted manual pages to be compressed
152# when they are installed:
153#
154#NOMANCOMPRESS= true
155#
156#
157# If you want the "compat" shared libraries installed as part of your normal
158# builds, uncomment these:
159#
160#COMPAT1X= yes
161#COMPAT20= yes
162#COMPAT21= yes
163#COMPAT22= yes
164#COMPAT3X= yes
165#COMPAT4X= yes
166#
167#
168# If you do not want additional documentation (some of which are
169# a few hundred KB's) for ports to be installed:
170#
171#NOPORTDOCS= true
172#
173#
174# Default format for system documentation, depends on your printer.
175# Set this to "ascii" for simple printers or screen
176#
177#PRINTERDEVICE= ps
178#
179#
180# How long to wait for a console keypress before booting the default kernel.
181# This value is approximately in milliseconds. Keypresses are accepted by the
182# BIOS before booting from disk, making it possible to give custom boot
183# parameters even when this is set to 0.
184#
185#BOOTWAIT=0
186#BOOTWAIT=30000
187#
188# By default, the system will always use the keyboard/video card as system
189# console. However, the boot blocks may be dynamically configured to use a
190# serial port in addition to or instead of the keyboard/video console.
191#
192# By default we use COM1 as our serial console port *if* we're going to use
193# a serial port as our console at all. Alter as necessary.
194#
195# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
196#
197#BOOT_COMCONSOLE_PORT= 0x3F8
198#
199# The default serial console speed is 9600. Set the speed to a larger value
200# for better interactive response.
201#
202#BOOT_COMCONSOLE_SPEED= 115200
203#
204# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining
205# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel
206# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet
207# still mount the server's '/' (i.e. rather than load the server's kernel).
208#
209#LOADER_TFTP_SUPPORT= YES
210#
211# By default, the ports collection attempts to use XFree86 4.X. If
212# you are running XFree86 3.3.X, uncomment this line.
213#
214#XFREE86_VERSION= 3
215#
216# By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier.
217# If you have a XFree86 from before 3.0 that has the X distribution in
218# /usr/X386, you want to uncomment this.
219#
220#X11BASE= /usr/X386
221#
222#
223# If you have Motif on your system, uncomment this.
224#
225#HAVE_MOTIF= yes
226#MOTIF_STATIC= yes
227#
228# If the default location of the Motif library (specified below) is NOT
229# appropriate for you, uncomment this and change it to the correct value.
230# If your motif is in ${X11BASE}/lib, you don't need to touch this line.
231#
232#MOTIFLIB= -L${X11BASE}/lib -lXm
233#
234#
235# If you're resident in the USA, this will help various ports to determine
236# whether or not they should attempt to comply with the various U.S.
237# export regulations on certain types of software which do not apply to
238# anyone else in the world.
239#
240#USA_RESIDENT= YES
241#
242#
243# Override "don't install a port that's already installed" behavior.
244# One might wish to do this for ports debugging or to unconditionally
245# reinstall a set of suspect/broken ports.
246#
247#FORCE_PKG_REGISTER= YES
248#
249#
250# If you're behind a firewall and need FTP or HTTP proxy services for
251# ports collection fetching to work, the following examples give the
252# necessary syntax. See the fetch(3) man page for details.
253#
254#FETCH_ENV= FTP_PROXY=ftp://10.0.0.1:21
255#FETCH_ENV= HTTP_PROXY=http://10.0.0.1:80
256#
257#
258# Port master sites.
259#
260# If you want your port fetches to go somewhere else than the default
261# (specified below) in case the distfile/patchfile was not found,
262# uncomment this and change it to a location nearest you. (Don't
263# remove the "/${DIST_SUBDIR}/" part.)
264#
265#MASTER_SITE_BACKUP?= \
266# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
267#
268# If you want your port fetches to check the above site first (before
269# the MASTER_SITES specified in the port Makefiles), uncomment the
270# line below. You can also change the right side to point to wherever
271# you want.
272#
273#MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP}
274#
275# Some ports use a special variable to point to a collection of
276# mirrors of well-known software archives. If you have a mirror close
277# to you, uncomment any of the following lines and change it to that
278# address. (Don't remove the "/%SUBDIR%/" part.)
279#
280# Note: the right hand sides of the following lines are only for your
281# information. For a full list of default sites, take a look at
282# bsd.sites.mk.
283#
284#MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/
285#MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/
286#MASTER_SITE_FREEBSD_ORG= ftp://ftp.FreeBSD.org/pub/FreeBSD/%SUBDIR%/
287#MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/%SUBDIR%/
288#MASTER_SITE_GNU= ftp://ftp.gnu.org/gnu/%SUBDIR%/
289#MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/
290#MASTER_SITE_LOCAL= ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/%SUBDIR%/
291#MASTER_SITE_MOZILLA= ftp://ftp.mozilla.org/pub/%SUBDIR%/
292#MASTER_SITE_NETBSD= ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/%SUBDIR%/
293#MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/
294#MASTER_SITE_PORTS_JP= ftp://ports.jp.FreeBSD.org/pub/FreeBSD-jp/ports-jp/LOCAL_PORTS/%SUBDIR%/
295#MASTER_SITE_RINGSERVER= ftp://ftp.dnsbalance.ring.gr.jp/pub/%SUBDIR%/
296#MASTER_SITE_RUBY= ftp://ftp.ruby-lang.org/pub/ruby/%SUBDIR%/
297#MASTER_SITE_SOURCEFORGE= ftp://ftp2.sourceforge.net/pub/sourceforge/%SUBDIR%/
298#MASTER_SITE_SOURCEWARE= ftp://ftp.freesoftware.com/pub/sourceware/%SUBDIR%/
299#MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/
300#MASTER_SITE_TCLTK= ftp://ftp.scriptics.com/pub/tcl/%SUBDIR%/
301#MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/
302#MASTER_SITE_THEMES= ftp://ftp.themes.org/pub/themes/%SUBDIR%/
303#MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/
304#MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/
305#MASTER_SITE_XEMACS= ftp://ftp.xemacs.org/pub/xemacs/%SUBDIR%/
306#MASTER_SITE_XFREE= ftp://ftp.xfree86.org/pub/XFree86/%SUBDIR%/source/
307#
308# Also it is highly recommended that you configure MASTER_SORT_REGEX
309# to choose better mirror sites for you. List awk(1)-style regular
310# expressions separated by space so MASTER_SITES will be sorted in
311# that order. The following example is for Japanese users; change
312# "jp" part to your ccTLD ("de", "ru", "uk", etc.) or the domain names
313# of your nearest/upstream networks to meet your needs.
314#
315#MASTER_SORT_REGEX?= ://[^/]*\.jp[/.]
316#
317# Ports can place their working directories somewhere other than under
318# /usr/ports.
319#WRKDIRPREFIX= /var/tmp
320#
984263bc
MD
321# Kerberos 5
322# If you want Kerberos 5 (KTH Heimdal), define this:
323#
324#MAKE_KERBEROS5= yes
325#
326# Kerberos 5 su (k5su)
327# If you want to use the k5su utility, define this to have it installed
328# set-user-ID.
329#ENABLE_SUID_K5SU= yes
330#
331#
332# Kerberos5
333# If you want to install MIT Kerberos5 port somewhere other than /usr/local,
334# define this (this is also used to tell ssh1 that kerberos is needed):
335#
336#KRB5_HOME= /usr/local
337#
338#
339# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution
340# file(s) you use on your site (see /usr/share/examples/cvsup/README for more
341# information on CVSup and these files). To use, do "make update" in /usr/src.
342#
343#SUP_UPDATE= yes
344#
345#SUP= /usr/local/bin/cvsup
346#SUPFLAGS= -g -L 2
347#SUPHOST= cvsup.uk.FreeBSD.org
348#SUPFILE= /usr/share/examples/cvsup/stable-supfile
349#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile
350#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile
351#
352# top(1) uses a hash table for the user names. The size of this hash
353# can be tuned to match the number of local users. The table size should
354# be a prime number approximately twice as large as the number of lines in
355# /etc/passwd. The default number is 20011.
356#
357#TOP_TABLE_SIZE= 101
358#
359# Documentation
360#
361# The list of languages and encodings to build and install
362#
363#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R
364#
365#
366# sendmail
367#
368# The following sets the default m4 configuration file to use at
369# install time. Use with caution as a make install will overwrite
370# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now
371# deprecated. The value should be a fully qualified path name.
372# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
373# create /etc/mail/sendmail.cf before installworld installs an
374# updated sendmail binary.
375#
376#SENDMAIL_MC=/etc/mail/myconfig.mc
377#
378# The following sets the default m4 configuration file for mail
379# submission to use at install time. Use with caution as a make
380# install will overwrite any existing /etc/mail/submit.cf. The
381# value should be a fully qualified path name.
382# Avoid using a value of /etc/mail/submit.mc as a buildworld will
383# create /etc/mail/submit.cf before installworld installs an
384# updated sendmail binary.
385#
386#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
387#
388# If you need to build additional .cf files during a make buildworld,
389# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC.
390# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
391# create /etc/mail/sendmail.cf before installworld installs an
392# updated sendmail binary.
393#
394#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc
395#
396# Setting the following variable modifies the flags passed to m4 when
397# building a .cf file from a .mc file. It can be used to enable
398# features disabled by default.
399#
400#SENDMAIL_M4_FLAGS=
401#
402# Setting the following variables modifies the build environment for
403# sendmail and its related utilities. For example, SASL support can be
404# added with settings such as:
405#
406# with SASLv1:
407# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL
408# SENDMAIL_LDFLAGS=-L/usr/local/lib
409# SENDMAIL_LDADD=-lsasl
410#
411# with SASLv2:
412# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
413# SENDMAIL_LDFLAGS=-L/usr/local/lib
414# SENDMAIL_LDADD=-lsasl2
415#
416# Note: If you are using Cyrus SASL with other applications which require
417# access to the sasldb file, you should add the following to your
418# sendmail.mc file:
419#
420# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')
421#
422#SENDMAIL_CFLAGS=
423#SENDMAIL_LDFLAGS=
424#SENDMAIL_LDADD=
425#SENDMAIL_DPADD=
426#
427# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a
428# set-user-ID root binary instead of a set-group-ID smmsp binary and will
429# prevent the installation of /etc/mail/submit.cf.
430# This is a deprecated mode of operation. See etc/mail/README for more
431# information.
432#
433#SENDMAIL_SET_USER_ID=
434#
435# The permissions to use on alias and map databases generated using
436# /etc/mail/Makefile. Defaults to 0640.
437#
438#SENDMAIL_MAP_PERMS=