Add support for pentium-m CPUs.
[dragonfly.git] / etc / defaults / make.conf
CommitLineData
984263bc 1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $
2c626087 2# $DragonFly: src/etc/defaults/make.conf,v 1.23 2006/11/09 18:44:52 pavalos Exp $
984263bc
MD
3#
4# NOTE: Please would any committer updating this file also update the
5# make.conf(5) manual page, if necessary, which is located in
6# src/share/man/man5/make.conf.5.
7#
8# This file, if present, will be read by make (see /usr/share/mk/sys.mk).
9# It allows you to override macro definitions to make without changing
10# your source tree, or anything the source tree installs.
11#
12# This file must be in valid Makefile syntax.
13#
14# You have to find the things you can put here in the Makefiles and
15# documentation of the source tree.
16#
984263bc
MD
17# The CPUTYPE variable controls which processor should be targeted for
18# generated code. This controls processor-specific optimizations in
19# certain code (currently only OpenSSL) as well as modifying the value
20# of CFLAGS to contain the appropriate optimization directive to gcc.
21# The automatic setting of CFLAGS may be overridden using the
22# NO_CPU_CFLAGS variable below.
23# Currently the following CPU types are recognized:
24# Intel x86 architecture:
f2288f50
SW
25# (AMD CPUs) opteron athlon-fx athlon64 k8 k7 k6-3 k6-2 k6 k5
26# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486
984263bc
MD
27#
28# If you experience any problems after setting this flag, please unset
29# it again before submitting a bug report or attempting to modify code.
30# It may be that certain types of software will become unstable after being
31# compiled with processor-specific (or higher - see below) optimization flags.
32# If in doubt, do not set CPUTYPE or CFLAGS to non-default values.
33#
34#CPUTYPE=i686
35#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically
36#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically
37#
dfa77fe6
MD
38# The CCVER variable controls which GCC-version to use by default. It
39# should be set using ?= so as not to interfere with CCVER overrides from
f2288f50
SW
40# userland or the buildworld. Note that building world or the kernel using
41# the experimental compiler might be broken at any time. We currently
42# recommend that an override NOT be set in /etc/make.conf.
dfa77fe6 43#
cecff5c1
MD
44#CCVER?=gcc34 # (use GCC 3.4, default)
45#CCVER?=gcc40 # (use GCC 4.0, experimental, must define WANT_GCC40)
ddf7cc86 46#CCVER?=gcc41 # (use GCC 4.1, experimental, must define WANT_GCC41)
29d48e65
SS
47#
48# Build gcc40 with world. This won't make gcc40 the default compiler
29d48e65 49#WANT_GCC40=yes
dfa77fe6 50#
ddf7cc86
SS
51# Build gcc41 with world. This won't make gcc41 the default compiler.
52#WANT_GCC41=yes
53#
984263bc
MD
54# CFLAGS controls the compiler settings used when compiling C code.
55# Note that optimization settings above -O (-O2, ...) are not recommended
56# or supported for compiling the world or the kernel - please revert any
57# nonstandard optimization settings to "-O" before submitting bug reports
58# to the developers.
984263bc
MD
59#
60#CFLAGS= -O -pipe
61#
62# CXXFLAGS controls the compiler settings used when compiling C++ code.
63# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish
64# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "="
65# alone will remove the often needed contents of CFLAGS from CXXFLAGS.
66#
67#CXXFLAGS+= -fmemoize-lookups -fsave-memoized
68#
69# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested
70# for use in developing FreeBSD and testing changes. They can be used by
71# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not
72# included here due to compiler bugs, e.g., mkdir()'s mode_t argument.
73#
74BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \
75 -Wcast-qual -Wchar-subscripts -Winline \
76 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \
77 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings
78#
79# WARNS_WERROR causes -Werror to be added when WARNS is in effect.
984263bc
MD
80#WARNS_WERROR= yes
81#
82# To compile just the kernel with special optimizations, you should use
83# this instead of CFLAGS (which is not applicable to kernel builds anyway).
84# There is very little to gain by using higher optimization levels, and doing
85# so can cause problems.
86#
87#COPTFLAGS= -O -pipe
88#
bb4f1f7e
JR
89# Strip the file before installing. Setting this to nothing will keep
90# the debugging symbols in the installed files.
91#STRIP= -s
92#
984263bc
MD
93# Compare before install
94#INSTALL=install -C
95#
984263bc
MD
96# To build ppp with normal permissions
97#PPP_NOSUID= true
98#
99# To enable installing ssh(1) with the setuid bit turned on
100#ENABLE_SUID_SSH= true
101#
62101763
PA
102# To use GNU tar as the standard tar. The default is bsdtar.
103#WITH_GTAR= true
867e3b04 104#
984263bc 105# To avoid building various parts of the base system:
984263bc 106#NO_BIND= true # do not build BIND
cecff5c1
MD
107#NO_CRYPT= true # do not build crypto code
108#NO_CVS= true # do not build CVS
984263bc 109#NO_FORTRAN= true # do not build g77 and related libraries
cecff5c1 110#NO_GAMES= true # do not enter the games subdirectory
f2288f50 111#NO_GDB= true # do not build GDB
984263bc
MD
112#NO_I4B= true # do not build isdn4bsd package
113#NO_IPFILTER= true # do not build IP Filter package
cecff5c1 114#NO_LIBC_R= true # do not build libc_r (re-entrant version of libc)
984263bc
MD
115#NO_LPR= true # do not build lpr and related programs
116#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector
117#NO_MODULES= true # do not build modules with the kernel
118#NO_OBJC= true # do not build Objective C support
119#NO_OPENSSH= true # do not build OpenSSH
120#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH)
121#NO_SENDMAIL= true # do not build sendmail and related programs
cecff5c1 122#NO_SHARE= true # do not enter the share subdirectory
984263bc 123#NO_X= true # do not compile in XWindows support (e.g. doscmd)
984263bc 124#NOINFO= true # do not make or install info files
cecff5c1 125#NOINFOCOMPRESS=true # do not compress info files
984263bc 126#NOMAN= true # do not build manual pages
cecff5c1 127#NOMANCOMPRESS= true # do not compress man pages
984263bc 128#NOPROFILE= true # Avoid compiling profiled libraries
984263bc
MD
129#
130# To build sys/modules when building the world (our old way of doing things)
131#MODULES_WITH_WORLD=true # do not build modules when building kernel
132#
133# The list of modules to build instead of all of them.
fdd814c0 134#MODULES_OVERRIDE= emulation/linux net/ipfw
984263bc 135#
cecff5c1
MD
136# To avoid running MAKEDEV all on /dev during install:
137#NO_MAKEDEV= true
138#
867e3b04
SW
139# The following controls building optional IDEA code in libcrypto.
140# Patents are involved - you must not use this unless
984263bc
MD
141# you either have a license or fall within patent 'fair use'
142# provisions.
143#
144# *** It is YOUR RESPONSIBILITY to determine if you can use this! ***
145#
146# IDEA is patented in the USA and many European countries - thought to
147# be OK to use for any non-commercial use. This is optional.
cecff5c1 148#WANT_IDEA= YES # IDEA (128 bit symmetric encryption)
984263bc
MD
149#
150# Default format for system documentation, depends on your printer.
151# Set this to "ascii" for simple printers or screen
152#
153#PRINTERDEVICE= ps
154#
984263bc
MD
155# By default, the system will always use the keyboard/video card as system
156# console. However, the boot blocks may be dynamically configured to use a
157# serial port in addition to or instead of the keyboard/video console.
158#
159# By default we use COM1 as our serial console port *if* we're going to use
160# a serial port as our console at all. Alter as necessary.
161#
162# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8
163#
164#BOOT_COMCONSOLE_PORT= 0x3F8
165#
166# The default serial console speed is 9600. Set the speed to a larger value
167# for better interactive response.
168#
169#BOOT_COMCONSOLE_SPEED= 115200
170#
171# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining
172# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel
173# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet
174# still mount the server's '/' (i.e. rather than load the server's kernel).
175#
176#LOADER_TFTP_SUPPORT= YES
177#
cecff5c1
MD
178# If you want Kerberos 5, define this.
179#WANT_KERBEROS= yes
984263bc 180#
984263bc
MD
181# If you want to use the k5su utility, define this to have it installed
182# set-user-ID.
183#ENABLE_SUID_K5SU= yes
184#
984263bc
MD
185# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution
186# file(s) you use on your site (see /usr/share/examples/cvsup/README for more
187# information on CVSup and these files). To use, do "make update" in /usr/src.
188#
189#SUP_UPDATE= yes
984263bc
MD
190#SUP= /usr/local/bin/cvsup
191#SUPFLAGS= -g -L 2
cecff5c1
MD
192#SUPHOST= cvsup.dragonflybsd.org
193#SUPFILE= /usr/share/examples/cvsup/DragonFly-src-supfile
984263bc
MD
194#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile
195#
196# top(1) uses a hash table for the user names. The size of this hash
197# can be tuned to match the number of local users. The table size should
198# be a prime number approximately twice as large as the number of lines in
199# /etc/passwd. The default number is 20011.
200#
201#TOP_TABLE_SIZE= 101
202#
203# Documentation
204#
205# The list of languages and encodings to build and install
206#
207#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R
208#
984263bc
MD
209# sendmail
210#
211# The following sets the default m4 configuration file to use at
212# install time. Use with caution as a make install will overwrite
213# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now
214# deprecated. The value should be a fully qualified path name.
215# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
216# create /etc/mail/sendmail.cf before installworld installs an
217# updated sendmail binary.
218#
219#SENDMAIL_MC=/etc/mail/myconfig.mc
220#
221# The following sets the default m4 configuration file for mail
222# submission to use at install time. Use with caution as a make
223# install will overwrite any existing /etc/mail/submit.cf. The
224# value should be a fully qualified path name.
225# Avoid using a value of /etc/mail/submit.mc as a buildworld will
226# create /etc/mail/submit.cf before installworld installs an
227# updated sendmail binary.
228#
229#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc
230#
231# If you need to build additional .cf files during a make buildworld,
232# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC.
233# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will
234# create /etc/mail/sendmail.cf before installworld installs an
235# updated sendmail binary.
236#
237#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc
238#
239# Setting the following variable modifies the flags passed to m4 when
240# building a .cf file from a .mc file. It can be used to enable
241# features disabled by default.
242#
243#SENDMAIL_M4_FLAGS=
244#
245# Setting the following variables modifies the build environment for
246# sendmail and its related utilities. For example, SASL support can be
247# added with settings such as:
248#
249# with SASLv1:
250# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL
251# SENDMAIL_LDFLAGS=-L/usr/local/lib
252# SENDMAIL_LDADD=-lsasl
253#
254# with SASLv2:
255# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2
256# SENDMAIL_LDFLAGS=-L/usr/local/lib
257# SENDMAIL_LDADD=-lsasl2
258#
259# Note: If you are using Cyrus SASL with other applications which require
260# access to the sasldb file, you should add the following to your
261# sendmail.mc file:
262#
263# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')
264#
265#SENDMAIL_CFLAGS=
266#SENDMAIL_LDFLAGS=
267#SENDMAIL_LDADD=
268#SENDMAIL_DPADD=
269#
270# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a
271# set-user-ID root binary instead of a set-group-ID smmsp binary and will
272# prevent the installation of /etc/mail/submit.cf.
273# This is a deprecated mode of operation. See etc/mail/README for more
274# information.
275#
276#SENDMAIL_SET_USER_ID=
277#
278# The permissions to use on alias and map databases generated using
279# /etc/mail/Makefile. Defaults to 0640.
280#
281#SENDMAIL_MAP_PERMS=