[dragonfly.git] / sys / config / JG64

#
# JG64 -- Generic kernel configuration file for DragonFly/x86_64
#
# Check the LINT configuration file in sys/config, for an
# exhaustive list of options.
#
# $DragonFly: src/sys/config/JG64,v 1.2 2008/09/28 20:58:11 victor Exp $

platform	pc64
machine		x86_64
machine_arch	x86_64
cpu		HAMMER_CPU
ident		JG64
maxusers	0

makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

##options 	MATH_EMULATE		#Support for x87 emulation
options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	HAMMER			#Hammer Filesystem
options		NULLFS			#NULLFS
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_DIRHASH		#Improve performance on big directories
options 	MFS			#Memory Filesystem
options 	MD_ROOT			#MD is a potential root device
options 	NFS			#Network Filesystem
options 	NFS_ROOT		#NFS usable as root device, NFS required
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	PROCFS			#Process filesystem
#JG do we need it? does it work (on x86_64)?
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
##options		COMPAT_DF12		#Compatible with DragonFly 1.2 and earlier
options 	SCSI_DELAY=5000		#Delay (in ms) before probing SCSI
options		DEVICE_POLLING		# Support mixed interrupt-polling
					# handling of network device drivers
##options 	UCONSOLE		#Allow users to grab the console
##options 	USERCONFIG		#boot -c editor
##options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
##options 	ICMP_BANDLIM		#Rate limit bad replies
##options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
options		AHD_REG_PRETTY_PRINT	# Print register bitfields in debug 
					# output.  Adds ~215k to driver.

# To make an SMP kernel both SMP and APIC_IO are usually
# specified.  SMP boxes with severely broken BIOSes which
# boot fine for non-SMP builds *might* work in SMP mode
# if you define SMP and leave APIC_IO turned off.
#
#options 	SMP			# Symmetric MultiProcessor Kernel
#options 	APIC_IO			# Symmetric (APIC) I/O

# Debugging for Development
options 	DDB
options 	DDB_TRACE
options 	INVARIANTS

# ACPI options
#options 	ACPI_QUIRK_VMWARE	# VMware's ACPI-fast24 timer is broken

device		isa
##device		eisa
device		pci

# Floppy drives
##device		fdc0	at isa? port IO_FD1 irq 6 drq 2
##device		fd0	at fdc0 drive 0
##device		fd1	at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device		fdc0

# AHCI driver, this will override NATA for AHCI devices,
# both drivers may be included.
#
device         ahci

# Sil3124/3132/3531 driver
#
device          sili

# NEW-ATA (NATA) and ATAPI devices
#
device		nata
device		natadisk		# ATA disk drives
device		natapicd		# ATAPI CDROM drives
device		natapifd		# ATAPI floppy drives
device		natapist		# ATAPI tape drives
device		natapicam		# Emulate ATAPI devices as SCSI 
device		nataraid		# support for ATA software RAID
					# controllers
##device		natausb			# ATA-over-USB support
options 	ATA_STATIC_ID		# Static device numbering

# LEGACY ATA and ATAPI devices
#device		ata0	at isa? port IO_WD1 irq 14
#device		ata1	at isa? port IO_WD2 irq 15
#device		ata
#device		atadisk			# ATA disk drives
#device		atapicd			# ATAPI CDROM drives
#device		atapifd			# ATAPI floppy drives
#device		atapist			# ATAPI tape drives
#device		atapicam		# Emulate ATAPI devices as SCSI via CAM
#options 	ATA_STATIC_ID		#Static device numbering

# SCSI Controllers
##device		ahb		# EISA AHA1742 family
##device		ahc		# AHA2940 and onboard AIC7xxx devices
##device		ahd		# AHA39320/29320 and onboard AIC79xx devices
##device		amd		# AMD 53C974 (Tekram DC-390(T))
##device		isp		# Qlogic family
##device		mpt		# LSI-Logic MPT/Fusion
##device		ncr		# NCR/Symbios Logic
##device		sym		# NCR/Symbios Logic (newer chipsets)
##options 	SYM_SETUP_LP_PROBE_MAP=0x40
				# Allow ncr to attach legacy NCR devices when 
				# both sym and ncr are configured

##device		adv0	at isa?
##device		adw
##device		bt0	at isa?
##device		aha0	at isa?
##device		aic0	at isa?

##device		ncv		# NCR 53C500
##device		nsp		# Workbit Ninja SCSI-3
##device		stg		# TMC 18C30/18C50

# SCSI peripherals
device		scbus		# SCSI bus (required)
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)

# RAID controllers interfaced to the SCSI subsystem
##device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
##device		dpt		# DPT Smartcache - See LINT for options!
##device		iir		# Intel Integrated RAID
##device		mly		# Mylex AcceleRAID/eXtremeRAID
##device		ciss		# Compaq SmartRAID 5* series

# RAID controllers
##device		aac		# Adaptec FSA RAID, Dell PERC2/PERC3
#device		aacp		# SCSI passthrough for aac (requires CAM)
##device		ida		# Compaq Smart RAID
##device		ips		# IBM ServeRAID
##device		amr		# AMI MegaRAID
##device		mlx		# Mylex DAC960 family
##device		twe		# 3ware Escalade 7000/8000's
##device		twa		# 3ware Escalade 9000's
##device		pst		# Promise Supertrack

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1 flags 0x1
device		psm0	at atkbdc? irq 12

device		vga0	at isa?

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? flags 0x100
##options 	SC_PIXEL_MODE		# add support for the raster text mode

##device		agp		# support several AGP chipsets

# Floating point support - do not disable.
##device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
##device		apm0	at nexus? disable flags 0x20 # Advanced Power Management

# HW monitoring devices
##device		lm0	at isa? port 0x290
##device		it0	at isa?	port 0x290
##device		it1	at isa?	port 0xc00
##device		it2	at isa?	port 0xd00

# PCCARD (PCMCIA) support
##device		pccard
##device		cardbus
##device		cbb

# Serial (COM) ports
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 irq 3
device		sio2	at isa? disable port IO_COM3 irq 5
device		sio3	at isa? disable port IO_COM4 irq 9

# Parallel port
##device		ppc0	at isa? irq 7
##device		ppbus		# Parallel port bus (required)
##device		lpt		# Printer
##device		plip		# TCP/IP over parallel
##device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da


# PCI Ethernet NICs.
device		de		# DEC/Intel DC21x4x (``Tulip'')
device		txp		# 3Com 3cR990 (``Typhoon'')
device		vx		# 3Com 3c590, 3c595 (``Vortex'')

device		em		# Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
				# Requires ig_hal
device		ig_hal		# Intel PRO/1000 hardware abstraction layer

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
device		bce		# Broadcom NetXtreme II Gigabit Ethernet
device		bfe		# Broadcom BCM440x 10/100 Ethernet
device		dc		# DEC/Intel 21143 and various workalikes
device		et		# Agere ET1310 10/100/1000 Ethernet
device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
device		pcn		# AMD Am79C97x PCI 10/100 NICs
device		rl		# RealTek 8129/8139
device		re		# RealTek 8139C+/8169
device		sf		# Adaptec AIC-6915 (``Starfire'')
device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
device		sk		# SysKonnect GEnesis, LinkSys EG1023, D-Link
device		ste		# Sundance ST201 (D-Link DFE-550TX)
device		tl		# Texas Instruments ThunderLAN
device		tx		# SMC EtherPower II (83c170 ``EPIC'')
device		vge		# VIA 612x GigE
device		vr		# VIA Rhine, Rhine II
device		wb		# Winbond W89C840F
device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
device		bge		# Broadcom BCM570x (``Tigon III'')
device		stge		# Sundance/Tamarack TC9021 Gigabit Ethernet
device		msk		# Marvell/SysKonnect Yukon II Gigabit Ethernet
device		nfe		# NVIDIA nForce MCP 10/100/Gigabit Ethernet

# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
##device		ed0	at isa? disable port 0x280 irq 10 iomem 0xd8000
##device		ex
##device		ep
##device		fe0	at isa? disable port 0x300
# Xircom Ethernet
##device		xe

# Wireless NIC cards
##device		wlan		# 802.11 support
##device		wlan_ccmp	# 802.11 CCMP support
##device		wlan_tkip	# 802.11 TKIP support
##device		wlan_wep	# 802.11 WEP support
# 802.11 TX rate control algorithms
#device		wlan_ratectl_amrr	# AMRR
##device		wlan_ratectl_onoe	# Onoe
##device		wlan_ratectl_sample	# Sample

# Aironet 4500/4800 802.11 wireless NICs.  Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
##device		an
##device		ral		# Ralink Technology 802.11 wireless NIC
				# Requires wlan_ratectl_onoe and
				# wlan_ratectl_sample
##device		rtw		# RealTek 802.11 wireless NIC
				# Requires wlan_ratectl_onoe and wlan_wep
# WaveLAN/IEEE 802.11 wireless NICs.  Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
##device		wi

# The probe order of these is presently determined by i386/isa/isa_compat.c.
##device		ie0	at isa? disable port 0x300 irq 10 iomem 0xd0000
#device		le0	at isa? disable port 0x300 irq 5 iomem 0xd0000
##device		lnc0	at isa? disable port 0x280 irq 10 drq 0
##device		cs0	at isa? disable port 0x300
##device		sn0	at isa? disable port 0x300 irq 10

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
pseudo-device	sl	1	# Kernel SLIP
pseudo-device	ppp	1	# Kernel PPP
pseudo-device	tun		# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	md		# Memory "disks"
pseudo-device	gif		# IPv6 and IPv4 tunneling
pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf		#Berkeley packet filter

##pseudo-device	crypto		# core crypto support, used by wlan

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		usb		# USB Bus (required)
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
device		uscanner	# Scanners
device		urio		# Diamond Rio MP3 Player
# USB Ethernet, requires mii
device		aue		# ADMtek USB ethernet
device		axe		# ASIX Electronics USB Ethernet
device		cue		# CATC USB ethernet
device		kue		# Kawasaki LSI USB ethernet
#device		rue		# RealTek 8150 based USB ethernet
# USB wireless NICs, requires wlan, wlan_ratectl_onoe
#device		rum		# Ralink Technology RT2501USB/RT2601USB
#device		ural		# Ralink Technology RT2500USB

# FireWire support
##device		firewire	# FireWire bus code
##device		sbp		# SCSI over FireWire (Requires scbus and da)
##device		fwe		# Ethernet over FireWire (non-standard!)
Commit	Line	Data
92d33996	1	#
c1543a89	2	# JG64 -- Generic kernel configuration file for DragonFly/x86_64
92d33996 MD	3	#
	4	# Check the LINT configuration file in sys/config, for an
	5	# exhaustive list of options.
	6	#
4a0df967	7	# $DragonFly: src/sys/config/JG64,v 1.2 2008/09/28 20:58:11 victor Exp $
92d33996 MD	8
92d33996 MD	9	platform pc64
c1543a89 SS	10	machine x86_64
c1543a89 SS	11	machine_arch x86_64
92d33996 MD	12	cpu HAMMER_CPU
	13	ident JG64
	14	maxusers 0
	15
	16	makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
	17
	18	##options MATH_EMULATE #Support for x87 emulation
	19	options INET #InterNETworking
	20	options INET6 #IPv6 communications protocols
	21	options HAMMER #Hammer Filesystem
4a7837fb	22	options NULLFS #NULLFS
92d33996 MD	23	options FFS #Berkeley Fast Filesystem
	24	options FFS_ROOT #FFS usable as root device [keep this!]
	25	options SOFTUPDATES #Enable FFS soft updates support
	26	options UFS_DIRHASH #Improve performance on big directories
	27	options MFS #Memory Filesystem
	28	options MD_ROOT #MD is a potential root device
	29	options NFS #Network Filesystem
	30	options NFS_ROOT #NFS usable as root device, NFS required
	31	options MSDOSFS #MSDOS Filesystem
	32	options CD9660 #ISO 9660 Filesystem
a6a09809	33	options PROCFS #Process filesystem
c1543a89	34	#JG do we need it? does it work (on x86_64)?
92d33996 MD	35	options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
	36	##options COMPAT_DF12 #Compatible with DragonFly 1.2 and earlier
	37	options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
	38	options DEVICE_POLLING # Support mixed interrupt-polling
	39	# handling of network device drivers
	40	##options UCONSOLE #Allow users to grab the console
	41	##options USERCONFIG #boot -c editor
	42	##options VISUAL_USERCONFIG #visual boot -c editor
5347affc	43	options KTRACE #ktrace(1) support
92d33996 MD	44	options SYSVSHM #SYSV-style shared memory
	45	options SYSVMSG #SYSV-style message queues
	46	options SYSVSEM #SYSV-style semaphores
	47	options P1003_1B #Posix P1003_1B real-time extensions
	48	options _KPOSIX_PRIORITY_SCHEDULING
	49	##options ICMP_BANDLIM #Rate limit bad replies
	50	##options KBD_INSTALL_CDEV # install a CDEV entry in /dev
	51	options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
	52	# output. Adds ~128k to driver.
	53	options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
	54	# output. Adds ~215k to driver.
	55
	56	# To make an SMP kernel both SMP and APIC_IO are usually
	57	# specified. SMP boxes with severely broken BIOSes which
	58	# boot fine for non-SMP builds might work in SMP mode
	59	# if you define SMP and leave APIC_IO turned off.
	60	#
	61	#options SMP # Symmetric MultiProcessor Kernel
	62	#options APIC_IO # Symmetric (APIC) I/O
	63
	64	# Debugging for Development
	65	options DDB
	66	options DDB_TRACE
	67	options INVARIANTS
	68
	69	# ACPI options
	70	#options ACPI_QUIRK_VMWARE # VMware's ACPI-fast24 timer is broken
	71
	72	device isa
	73	##device eisa
	74	device pci
	75
	76	# Floppy drives
	77	##device fdc0 at isa? port IO_FD1 irq 6 drq 2
	78	##device fd0 at fdc0 drive 0
	79	##device fd1 at fdc0 drive 1
	80	#
	81	# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
	82	# don't use the above line for fdc0 but the following one:
	83	#device fdc0
	84
21e0df64 MD	85	# AHCI driver, this will override NATA for AHCI devices,
	86	# both drivers may be included.
	87	#
	88	device ahci
	89
	90	# Sil3124/3132/3531 driver
	91	#
	92	device sili
	93
92d33996 MD	94	# NEW-ATA (NATA) and ATAPI devices
	95	#
	96	device nata
	97	device natadisk # ATA disk drives
	98	device natapicd # ATAPI CDROM drives
	99	device natapifd # ATAPI floppy drives
	100	device natapist # ATAPI tape drives
	101	device natapicam # Emulate ATAPI devices as SCSI
	102	device nataraid # support for ATA software RAID
	103	# controllers
	104	##device natausb # ATA-over-USB support
	105	options ATA_STATIC_ID # Static device numbering
92d33996 MD	106
	107	# LEGACY ATA and ATAPI devices
	108	#device ata0 at isa? port IO_WD1 irq 14
	109	#device ata1 at isa? port IO_WD2 irq 15
	110	#device ata
	111	#device atadisk # ATA disk drives
	112	#device atapicd # ATAPI CDROM drives
	113	#device atapifd # ATAPI floppy drives
	114	#device atapist # ATAPI tape drives
	115	#device atapicam # Emulate ATAPI devices as SCSI via CAM
	116	#options ATA_STATIC_ID #Static device numbering
	117
	118	# SCSI Controllers
	119	##device ahb # EISA AHA1742 family
	120	##device ahc # AHA2940 and onboard AIC7xxx devices
	121	##device ahd # AHA39320/29320 and onboard AIC79xx devices
	122	##device amd # AMD 53C974 (Tekram DC-390(T))
	123	##device isp # Qlogic family
	124	##device mpt # LSI-Logic MPT/Fusion
	125	##device ncr # NCR/Symbios Logic
	126	##device sym # NCR/Symbios Logic (newer chipsets)
	127	##options SYM_SETUP_LP_PROBE_MAP=0x40
	128	# Allow ncr to attach legacy NCR devices when
	129	# both sym and ncr are configured
	130
	131	##device adv0 at isa?
	132	##device adw
	133	##device bt0 at isa?
	134	##device aha0 at isa?
	135	##device aic0 at isa?
	136
	137	##device ncv # NCR 53C500
	138	##device nsp # Workbit Ninja SCSI-3
	139	##device stg # TMC 18C30/18C50
	140
	141	# SCSI peripherals
	142	device scbus # SCSI bus (required)
	143	device da # Direct Access (disks)
	144	device sa # Sequential Access (tape etc)
	145	device cd # CD
	146	device pass # Passthrough device (direct SCSI access)
	147
	148	# RAID controllers interfaced to the SCSI subsystem
	149	##device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
	150	##device dpt # DPT Smartcache - See LINT for options!
	151	##device iir # Intel Integrated RAID
	152	##device mly # Mylex AcceleRAID/eXtremeRAID
	153	##device ciss # Compaq SmartRAID 5* series
	154
	155	# RAID controllers
	156	##device aac # Adaptec FSA RAID, Dell PERC2/PERC3
	157	#device aacp # SCSI passthrough for aac (requires CAM)
	158	##device ida # Compaq Smart RAID
	159	##device ips # IBM ServeRAID
	160	##device amr # AMI MegaRAID
	161	##device mlx # Mylex DAC960 family
	162	##device twe # 3ware Escalade 7000/8000's
	163	##device twa # 3ware Escalade 9000's
	164	##device pst # Promise Supertrack
	165
	166	# atkbdc0 controls both the keyboard and the PS/2 mouse
	167	device atkbdc0 at isa? port IO_KBD
	168	device atkbd0 at atkbdc? irq 1 flags 0x1
	169	device psm0 at atkbdc? irq 12
170
171	device vga0 at isa?
172
173	# splash screen/screen saver
174	pseudo-device splash
175
176	# syscons is the default console driver, resembling an SCO console
177	device sc0 at isa? flags 0x100
178	##options SC_PIXEL_MODE # add support for the raster text mode
179
180	##device agp # support several AGP chipsets
181
182	# Floating point support - do not disable.
183	##device npx0 at nexus? port IO_NPX irq 13
184
185	# Power management support (see LINT for more options)
186	##device apm0 at nexus? disable flags 0x20 # Advanced Power Management
187
188	# HW monitoring devices
189	##device lm0 at isa? port 0x290
190	##device it0 at isa? port 0x290
191	##device it1 at isa? port 0xc00
192	##device it2 at isa? port 0xd00
193
194	# PCCARD (PCMCIA) support
195	##device pccard
196	##device cardbus
197	##device cbb
198
199	# Serial (COM) ports
200	device sio0 at isa? port IO_COM1 flags 0x10 irq 4
201	device sio1 at isa? port IO_COM2 irq 3
202	device sio2 at isa? disable port IO_COM3 irq 5
203	device sio3 at isa? disable port IO_COM4 irq 9
204
205	# Parallel port
206	##device ppc0 at isa? irq 7
207	##device ppbus # Parallel port bus (required)
208	##device lpt # Printer
209	##device plip # TCP/IP over parallel
210	##device ppi # Parallel port interface device
211	#device vpo # Requires scbus and da
212
213
214	# PCI Ethernet NICs.
215	device de # DEC/Intel DC21x4x (``Tulip'')
92d33996 MD	216	device txp # 3Com 3cR990 (``Typhoon'')
	217	device vx # 3Com 3c590, 3c595 (``Vortex'')
	218
9c80d176 SZ	219	device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
	220	# Requires ig_hal
	221	device ig_hal # Intel PRO/1000 hardware abstraction layer
	222
92d33996 MD	223	# PCI Ethernet NICs that use the common MII bus controller code.
	224	# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
	225	device miibus # MII bus support
	226	device bce # Broadcom NetXtreme II Gigabit Ethernet
	227	device bfe # Broadcom BCM440x 10/100 Ethernet
	228	device dc # DEC/Intel 21143 and various workalikes
	229	device et # Agere ET1310 10/100/1000 Ethernet
	230	device fxp # Intel EtherExpress PRO/100B (82557, 82558)
	231	device pcn # AMD Am79C97x PCI 10/100 NICs
	232	device rl # RealTek 8129/8139
	233	device re # RealTek 8139C+/8169
	234	device sf # Adaptec AIC-6915 (``Starfire'')
	235	device sis # Silicon Integrated Systems SiS 900/SiS 7016
	236	device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link
	237	device ste # Sundance ST201 (D-Link DFE-550TX)
	238	device tl # Texas Instruments ThunderLAN
	239	device tx # SMC EtherPower II (83c170 ``EPIC'')
	240	device vge # VIA 612x GigE
	241	device vr # VIA Rhine, Rhine II
	242	device wb # Winbond W89C840F
	243	device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
	244	device bge # Broadcom BCM570x (``Tigon III'')
	245	device stge # Sundance/Tamarack TC9021 Gigabit Ethernet
	246	device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
	247	device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet
	248
	249	# ISA Ethernet NICs.
	250	# 'device ed' requires 'device miibus'
	251	##device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
	252	##device ex
	253	##device ep
	254	##device fe0 at isa? disable port 0x300
	255	# Xircom Ethernet
	256	##device xe
	257
	258	# Wireless NIC cards
	259	##device wlan # 802.11 support
	260	##device wlan_ccmp # 802.11 CCMP support
	261	##device wlan_tkip # 802.11 TKIP support
	262	##device wlan_wep # 802.11 WEP support
	263	# 802.11 TX rate control algorithms
	264	#device wlan_ratectl_amrr # AMRR
	265	##device wlan_ratectl_onoe # Onoe
	266	##device wlan_ratectl_sample # Sample
	267
	268	# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
	269	# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
	270	# mode (the factory default). If you set the switches on your ISA
	271	# card for a manually chosen I/O address and IRQ, you must specify
	272	# those parameters here.
	273	##device an
	274	##device ral # Ralink Technology 802.11 wireless NIC
	275	# Requires wlan_ratectl_onoe and
	276	# wlan_ratectl_sample
	277	##device rtw # RealTek 802.11 wireless NIC
	278	# Requires wlan_ratectl_onoe and wlan_wep
	279	# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
	280	# exists only as a PCMCIA device, so there is no ISA attachment needed
	281	# and resources will always be dynamically assigned by the pccard code.
	282	##device wi
	283
	284	# The probe order of these is presently determined by i386/isa/isa_compat.c.
	285	##device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
	286	#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
287	##device lnc0 at isa? disable port 0x280 irq 10 drq 0
288	##device cs0 at isa? disable port 0x300
289	##device sn0 at isa? disable port 0x300 irq 10
290
291	# Pseudo devices - the number indicates how many units to allocate.
292	pseudo-device loop # Network loopback
293	pseudo-device ether # Ethernet support
294	pseudo-device sl 1 # Kernel SLIP
295	pseudo-device ppp 1 # Kernel PPP
296	pseudo-device tun # Packet tunnel.
297	pseudo-device pty # Pseudo-ttys (telnet etc)
298	pseudo-device md # Memory "disks"
299	pseudo-device gif # IPv6 and IPv4 tunneling
300	pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
301
302	# The `bpf' pseudo-device enables the Berkeley Packet Filter.
303	# Be aware of the administrative consequences of enabling this!
304	pseudo-device bpf #Berkeley packet filter
305
306	##pseudo-device crypto # core crypto support, used by wlan
307
308	# USB support
21e0df64 MD	309	device uhci # UHCI PCI->USB interface
	310	device ohci # OHCI PCI->USB interface
	311	device usb # USB Bus (required)
	312	device ugen # Generic
	313	device uhid # "Human Interface Devices"
	314	device ukbd # Keyboard
	315	device ulpt # Printer
	316	device umass # Disks/Mass storage - Requires scbus and da
	317	device ums # Mouse
	318	device uscanner # Scanners
	319	device urio # Diamond Rio MP3 Player
92d33996	320	# USB Ethernet, requires mii
21e0df64 MD	321	device aue # ADMtek USB ethernet
	322	device axe # ASIX Electronics USB Ethernet
	323	device cue # CATC USB ethernet
	324	device kue # Kawasaki LSI USB ethernet
	325	#device rue # RealTek 8150 based USB ethernet
92d33996	326	# USB wireless NICs, requires wlan, wlan_ratectl_onoe
21e0df64 MD	327	#device rum # Ralink Technology RT2501USB/RT2601USB
21e0df64 MD	328	#device ural # Ralink Technology RT2500USB
92d33996 MD	329
	330	# FireWire support
	331	##device firewire # FireWire bus code
	332	##device sbp # SCSI over FireWire (Requires scbus and da)
	333	##device fwe # Ethernet over FireWire (non-standard!)