mqueues: Add support for _SC_MQ_PRIO_MAX in sysconf(3).
[dragonfly.git] / Makefile.inc1
CommitLineData
984263bc
MD
1#
2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
78792546 3# $DragonFly: src/Makefile.inc1,v 1.118 2008/06/24 20:22:30 thomas Exp $
cecff5c1
MD
4#
5# Build-time options are documented in make.conf(5).
984263bc
MD
6#
7# The intended user-driven targets are:
1397f94a 8#
984263bc 9# buildworld - rebuild *everything*, including glue to help do upgrades
1397f94a
MD
10# quickworld - skip the glue and do a depend+build on the meat
11# realquickworld - skip the glue and depend stages and just build the meat
12# crossworld - only build the glue (particularly the cross-build environment)
984263bc 13# installworld- install everything built by "buildworld"
984263bc
MD
14# most - build user commands, no libraries or include files
15# installmost - install user commands, no libraries or include files
16#
17# Standard targets (not defined here) are documented in the makefiles in
18# /usr/share/mk. These include:
19# obj depend all install clean cleandepend cleanobj
20
21# Put initial settings here.
22SUBDIR=
23
24# We must do share/info early so that installation of info `dir'
25# entries works correctly. Do it first since it is less likely to
26# grow dependencies on include and lib than vice versa.
27.if exists(${.CURDIR}/share/info)
28SUBDIR+= share/info
29.endif
30
31# We must do include and lib early so that the perl *.ph generation
32# works correctly as it uses the header files installed by this.
33.if exists(${.CURDIR}/include)
34SUBDIR+= include
35.endif
36.if exists(${.CURDIR}/lib)
37SUBDIR+= lib
38.endif
17d0fefe
MD
39# This exists simply to ensure that the obj dir hierarchy is
40# intact for nrelease, allowing the nrelease Makefile's to
41# reference ${.OBJDIR}.
42#
43.if exists(${.CURDIR}/nrelease)
44SUBDIR+= nrelease
45.endif
984263bc
MD
46
47.if exists(${.CURDIR}/bin)
48SUBDIR+= bin
49.endif
cecff5c1 50.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
984263bc
MD
51SUBDIR+= games
52.endif
53.if exists(${.CURDIR}/gnu)
54SUBDIR+= gnu
55.endif
984263bc
MD
56.if exists(${.CURDIR}/libexec)
57SUBDIR+= libexec
58.endif
59.if exists(${.CURDIR}/sbin)
60SUBDIR+= sbin
61.endif
cecff5c1 62.if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
984263bc
MD
63SUBDIR+= secure
64.endif
cecff5c1 65.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
984263bc
MD
66SUBDIR+= share
67.endif
68.if exists(${.CURDIR}/sys)
69SUBDIR+= sys
70.endif
71.if exists(${.CURDIR}/usr.bin)
72SUBDIR+= usr.bin
73.endif
74.if exists(${.CURDIR}/usr.sbin)
75SUBDIR+= usr.sbin
76.endif
77
984263bc
MD
78.if exists(${.CURDIR}/etc)
79SUBDIR+= etc
80.endif
81
82# These are last, since it is nice to at least get the base system
83# rebuilt before you do them.
84.if defined(LOCAL_DIRS)
85.for _DIR in ${LOCAL_DIRS}
86.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
87SUBDIR+= ${_DIR}
88.endif
89.endfor
90.endif
91
92.if defined(SUBDIR_OVERRIDE)
93SUBDIR= ${SUBDIR_OVERRIDE}
94.endif
95
96.if defined(NOCLEANDIR)
97CLEANDIR= clean cleandepend
98.else
99CLEANDIR= cleandir
100.endif
101
9974d917
SS
102.if defined(NO_CLEAN)
103NOCLEAN= # defined
104.endif
d0a8f509 105
1397f94a
MD
106# Object directory base in primary make. Note that when we rerun make
107# from inside this file we change MAKEOBJDIRPREFIX to the appropriate
108# subdirectory because the rest of the build system needs it that way.
109# The original object directory base is saved in OBJTREE.
110#
984263bc 111MAKEOBJDIRPREFIX?= /usr/obj
1397f94a
MD
112OBJTREE?= ${MAKEOBJDIRPREFIX}
113
114# Used for stage installs and pathing
115#
116DESTDIRBASE?= ${OBJTREE}${.CURDIR}
117
c89fd520
SS
118# Remove DESTDIR from MAKEFLAGS. It is present in the environment
119# anyhow, and we need to be able to override it for stage installs
120.MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*}
121
79809ae1
SS
122# This sets the compiler we use to build the world/kernel with
123WORLD_CCVER?= gcc41
123dec51 124WORLD_BINUTILSVER?= binutils217
ded5c503 125
984263bc
MD
126TARGET_ARCH?= ${MACHINE_ARCH}
127.if ${TARGET_ARCH} == ${MACHINE_ARCH}
128TARGET?= ${MACHINE}
129.else
130TARGET?= ${TARGET_ARCH}
131.endif
132.if make(buildworld)
133BUILD_ARCH!= sysctl -n hw.machine_arch
134.if ${MACHINE_ARCH} != ${BUILD_ARCH}
135.error To cross-build, set TARGET_ARCH.
136.endif
137.endif
1397f94a 138
0955fd91
MD
139# Backwards compatibility with older make's or older sys.mk's. make
140# is expected to define MACHINE_PLATFORM.
141#
142.if !defined(MACHINE_PLATFORM)
143MACHINE_PLATFORM= pc32
144.endif
4d005c1d
SS
145
146# XXX this is ugly and we need to come up with a nicer solution
147.if !defined(TARGET_PLATFORM)
148.if ${TARGET_ARCH} == "i386"
149TARGET_PLATFORM= pc32
150.elif ${TARGET_ARCH} == "amd64"
151TARGET_PLATFORM= pc64
152.else
153.error Unknown target architecture.
154.endif
155.endif
0955fd91 156
5f87b7d3
SZ
157THREAD_LIB?= thread_xu
158.if ${THREAD_LIB} == "c_r"
159.if defined(NO_LIBC_R)
160.error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
161.endif
162.endif
163
1397f94a
MD
164# BTOOLS (Natively built) All non-cross-development tools that the
165# main build needs. This includes things like 'mkdir' and 'rm'.
166# We will not use the native system's exec path once we start
167# on WORLD. (bootstrap-tools and build-tools or BTOOLS)
168#
169# CTOOLS (Natively built) Cross development tools which are specific
170# to the target architecture.
171#
172# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and
173# CTOOLS.
174#
0955fd91
MD
175# MACHINE_PLATFORM Platform Architecture we are building on
176# MACHINE Machine Architecture (usually the same as MACHINE_ARCH)
e2ea6619
MD
177# MACHINE_ARCH Cpu Architecture we are building on
178#
0955fd91
MD
179# TARGET_PLATFORM Platform Architecture we are building for
180# TARGET Machine Architecture we are building for
e2ea6619 181# TARGET_ARCH Cpu Architecture we are building for
1397f94a
MD
182#
183BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH}
184CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
185WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH}
186
79aa78bc
MD
187# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
188# cross-tools stages to augment the existing command path to access newer
189# versions of certain utilities such as 'patch' that the cross-tools stage
190# might expect.
191#
192BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
193
1397f94a
MD
194# The strict temporary command path contains all binaries required
195# by the buildworld system after the cross-tools stage.
196#
197STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
984263bc
MD
198
199TMPDIR?= /tmp
200TMPPID!= echo $$$$
984263bc
MD
201
202#
203# Building a world goes through the following stages
204#
205# 1. bootstrap-tool stage [BMAKE]
206# This stage is responsible for creating programs that
207# are needed for backward compatibility reasons. They
208# are not built as cross-tools.
209# 2. build-tool stage [TMAKE]
210# This stage is responsible for creating the object
211# tree and building any tools that are needed during
212# the build process.
213# 3. cross-tool stage [XMAKE]
214# This stage is responsible for creating any tools that
215# are needed for cross-builds. A cross-compiler is one
216# of them.
217# 4. world stage [WMAKE]
218# This stage actually builds the world.
219# 5. install stage (optional) [IMAKE]
220# This stage installs a previously built world.
221#
222
984263bc 223# bootstrap-tool stage
1397f94a
MD
224#
225BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
226 OBJTREE=${OBJTREE} \
44831353 227 DESTDIR=${BTOOLSDEST} \
79aa78bc 228 PATH=${BTOOLSPATH}:${PATH} \
984263bc 229 INSTALL="sh ${.CURDIR}/tools/install.sh"
1397f94a 230
984263bc 231BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
e486d225
SS
232 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
233 -DNO_WERROR -DNO_NLS
984263bc
MD
234
235# build-tool stage
1397f94a
MD
236#
237TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
238 OBJTREE=${OBJTREE} \
984263bc 239 DESTDIR= \
79aa78bc 240 PATH=${BTOOLSPATH}:${PATH} \
984263bc 241 INSTALL="sh ${.CURDIR}/tools/install.sh"
1397f94a
MD
242
243TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
e486d225 244 -DNO_FORTRAN -DNOSHARED
984263bc
MD
245
246# cross-tool stage
1397f94a
MD
247#
248# note: TOOLS_PREFIX points to the obj root holding the cross
44831353
MD
249# compiler binaries, while USRDATA_PREFIX points to the obj root
250# holding the target environment (and also determines where cross-built
251# libraries, crt*.o, and include files are installed).
1397f94a
MD
252#
253XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \
254 OBJTREE=${OBJTREE} \
255 DESTDIR=${CTOOLSDEST} \
256 INSTALL="sh ${.CURDIR}/tools/install.sh" \
257 TOOLS_PREFIX=${CTOOLSDEST} \
79aa78bc
MD
258 USRDATA_PREFIX=${WORLDDEST} \
259 PATH=${BTOOLSPATH}:${PATH}
1397f94a 260
44831353 261XMAKE= ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
e486d225 262 -DBOOTSTRAPPING -DNOSHARED
1397f94a
MD
263
264# world stage, note the strict path and note that TOOLS_PREFIX is left
265# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
266# which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
267# for both binary and library paths, even though it is being compiled to
268# WORLDDEST. None of the programs in the world stage are ever actually
269# executed during the buildworld/installworld.
270#
271CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \
272 OBJTREE=${OBJTREE} \
273 MACHINE_ARCH=${TARGET_ARCH} \
274 MACHINE=${TARGET} \
0955fd91 275 MACHINE_PLATFORM=${TARGET_PLATFORM} \
ded5c503 276 OBJFORMAT_PATH=${CTOOLSDEST} \
ce6fa878 277 HOST_CCVER=${HOST_CCVER} \
123dec51
SS
278 CCVER=${WORLD_CCVER} \
279 BINUTILSVER=${WORLD_BINUTILSVER}
984263bc 280
984263bc 281WMAKEENV= ${CROSSENV} \
1397f94a 282 DESTDIR=${WORLDDEST} \
984263bc 283 INSTALL="sh ${.CURDIR}/tools/install.sh" \
1397f94a
MD
284 PATH=${STRICTTMPPATH}
285
984263bc
MD
286WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
287
288# install stage
b07b69cc 289#
984263bc 290IMAKEENV= ${CROSSENV} \
1397f94a 291 PATH=${STRICTTMPPATH}
984263bc
MD
292IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
293
294# kernel stage
b07b69cc
MD
295#
296KMAKEENV= ${WMAKEENV}
984263bc 297
984263bc
MD
298# buildworld
299#
300# Attempt to rebuild the entire system, with reasonable chance of
301# success, regardless of how old your existing system is.
302#
2cde9453
SS
303_worldtmp: _cleantmp _mtreetmp
304.ORDER: _cleantmp _mtreetmp
305
306_cleantmp:
984263bc
MD
307 @echo
308 @echo "--------------------------------------------------------------"
309 @echo ">>> Rebuilding the temporary build tree"
310 @echo "--------------------------------------------------------------"
311.if !defined(NOCLEAN)
1397f94a 312 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
984263bc
MD
313.else
314 # XXX - These two can depend on any header file.
315 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
316 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
317.endif
2cde9453
SS
318
319_mtreetmp:
1397f94a
MD
320 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
321.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
322 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
323 -p ${_dir}/ > /dev/null
324 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
325 -p ${_dir}/usr > /dev/null
984263bc 326.endfor
1397f94a
MD
327 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
328 -p ${WORLDDEST}/usr/include > /dev/null
062db326 329 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
1397f94a 330
984263bc
MD
331_bootstrap-tools:
332 @echo
333 @echo "--------------------------------------------------------------"
334 @echo ">>> stage 1: bootstrap tools"
335 @echo "--------------------------------------------------------------"
336 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
337_cleanobj:
984263bc
MD
338 @echo
339 @echo "--------------------------------------------------------------"
1397f94a 340 @echo ">>> stage 2a: cleaning up the object tree"
984263bc
MD
341 @echo "--------------------------------------------------------------"
342 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
984263bc
MD
343_obj:
344 @echo
345 @echo "--------------------------------------------------------------"
1397f94a 346 @echo ">>> stage 2b: rebuilding the object tree"
984263bc
MD
347 @echo "--------------------------------------------------------------"
348 cd ${.CURDIR}; ${WMAKE} par-obj
349_build-tools:
350 @echo
351 @echo "--------------------------------------------------------------"
1397f94a 352 @echo ">>> stage 2c: build tools"
984263bc
MD
353 @echo "--------------------------------------------------------------"
354 cd ${.CURDIR}; ${TMAKE} build-tools
355_cross-tools:
356 @echo
357 @echo "--------------------------------------------------------------"
358 @echo ">>> stage 3: cross tools"
359 @echo "--------------------------------------------------------------"
360 cd ${.CURDIR}; ${XMAKE} cross-tools
361_includes:
362 @echo
363 @echo "--------------------------------------------------------------"
1397f94a 364 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
984263bc
MD
365 @echo "--------------------------------------------------------------"
366 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
367_libraries:
368 @echo
369 @echo "--------------------------------------------------------------"
1397f94a 370 @echo ">>> stage 4b: building libraries"
984263bc
MD
371 @echo "--------------------------------------------------------------"
372 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
373_depend:
374 @echo
375 @echo "--------------------------------------------------------------"
1397f94a 376 @echo ">>> stage 4c: make dependencies"
984263bc
MD
377 @echo "--------------------------------------------------------------"
378 cd ${.CURDIR}; ${WMAKE} par-depend
379everything:
380 @echo
381 @echo "--------------------------------------------------------------"
1397f94a 382 @echo ">>> stage 4d: building everything.."
984263bc
MD
383 @echo "--------------------------------------------------------------"
384 cd ${.CURDIR}; ${WMAKE} all
385
1397f94a
MD
386# note: buildworld no longer depends on _cleanobj because we rm -rf the
387# entire object tree and built the bootstrap tools in a different location.
388#
389# buildworld - build everything from scratch
390# quickworld - skip the bootstrap, build, and cross-build steps
391# realquickworld - skip the bootstrap, build, crossbuild, and depend step.
392#
393# note: we include _obj in realquickworld to prevent accidental creation
394# of files in /usr/src.
984263bc 395
c08b39fe 396WMAKE_TGTS=
984263bc
MD
397.if !defined(SUBDIR_OVERRIDE)
398WMAKE_TGTS+= _worldtmp _bootstrap-tools
399.endif
1397f94a 400WMAKE_TGTS+= _obj _build-tools
984263bc
MD
401.if !defined(SUBDIR_OVERRIDE)
402WMAKE_TGTS+= _cross-tools
403.endif
404WMAKE_TGTS+= _includes _libraries _depend everything
405
406buildworld: ${WMAKE_TGTS}
1397f94a 407
2cde9453 408quickworld: _mtreetmp _obj _includes _libraries _depend everything
1397f94a 409
2cde9453 410realquickworld: _mtreetmp _obj _includes _libraries everything
1397f94a
MD
411
412crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
413
984263bc 414.ORDER: ${WMAKE_TGTS}
9ce30817 415.ORDER: _obj _includes
2cde9453 416.ORDER: _mtreetmp _obj
984263bc
MD
417
418#
419# installcheck
420#
c08b39fe 421# Checks to be sure system is ready for installworld
984263bc
MD
422#
423installcheck:
424.if !defined(NO_SENDMAIL)
f35282e3
MD
425 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
426 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
984263bc 427.endif
f35282e3 428 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
f35282e3
MD
429 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; exit 1)
430 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
9b815a46 431.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
f7ed9937 432 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; exit 1;; esac
9b815a46 433.endif
984263bc
MD
434#
435# installworld
436#
437# Installs everything compiled by a 'buildworld'.
438#
5cccfb7b 439installworld: installcheck
984263bc 440 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
ec6483ce 441 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
984263bc
MD
442
443#
444# reinstall
445#
446# If you have a build server, you can NFS mount the source and obj directories
447# and do a 'make reinstall' on the *client* to install new binaries from the
448# most recent server build.
449#
450reinstall:
451 @echo "--------------------------------------------------------------"
452 @echo ">>> Making hierarchy"
453 @echo "--------------------------------------------------------------"
454 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
455 @echo
456 @echo "--------------------------------------------------------------"
457 @echo ">>> Installing everything.."
458 @echo "--------------------------------------------------------------"
459 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
460.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
461 @echo
462 @echo "--------------------------------------------------------------"
463 @echo ">>> Rebuilding man page indices"
464 @echo "--------------------------------------------------------------"
465 cd ${.CURDIR}/share/man; ${MAKE} makedb
466.endif
467
984263bc 468#
fc7aca3e 469# buildkernel, nativekernel, quickkernel, and installkernel
984263bc
MD
470#
471# Which kernels to build and/or install is specified by setting
472# KERNCONF. If not defined a GENERIC kernel is built/installed.
473# Only the existing (depending TARGET) config files are used
474# for building kernels and only the first of these is designated
475# as the one being installed.
476#
c2c83759
MD
477# You can specify INSTALLSTRIPPED=1 if you wish the installed
478# kernel and modules to be stripped of its debug info (required
479# symbols are left intact). You can specify INSTALLSTRIPPEDMODULES
480# if you only want to strip the modules of their debug info. These
481# only apply if you have DEBUG=-g in your kernel config or make line.
482#
984263bc
MD
483# Note that we have to use TARGET instead of TARGET_ARCH when
484# we're in kernel-land. Since only TARGET_ARCH is (expected) to
485# be set to cross-build, we have to make sure TARGET is set
486# properly.
487
488.if !defined(KERNCONF) && defined(KERNEL)
489KERNCONF= ${KERNEL}
490KERNWARN= yes
491.else
702a95cc
SS
492# XXX makeshift fix to build the right kernel for the (target) architecture
493# We should configure this in the platform files somehow
494.if ${TARGET_ARCH} == "i386"
984263bc 495KERNCONF?= GENERIC
702a95cc
SS
496.else
497KERNCONF?= AMD64_GENERIC
498.endif
984263bc
MD
499.endif
500INSTKERNNAME?= kernel
501
502KRNLSRCDIR= ${.CURDIR}/sys
4e54470f 503KRNLCONFDIR= ${KRNLSRCDIR}/config
984263bc
MD
504KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
505KERNCONFDIR?= ${KRNLCONFDIR}
506
507BUILDKERNELS=
508INSTALLKERNEL=
509.for _kernel in ${KERNCONF}
510.if exists(${KERNCONFDIR}/${_kernel})
511BUILDKERNELS+= ${_kernel}
512.if empty(INSTALLKERNEL)
513INSTALLKERNEL= ${_kernel}
514.endif
515.endif
516.endfor
517
9a359590
MD
518# kernel version numbers survive rm -rf
519#
520.for _kernel in ${BUILDKERNELS}
521.if exists(${KRNLOBJDIR}/${_kernel}/version)
522KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
523.endif
524.endfor
525
984263bc
MD
526#
527# buildkernel
528#
529# Builds all kernels defined by BUILDKERNELS.
530#
fc7aca3e 531bk_tools:
e05c8c84
MD
532 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
533 echo "You must buildworld before buildkernel. If you wish"; \
534 echo "to build a kernel using native tools, config it manually"; \
535 echo "or use the nativekernel target if you are in a rush"; \
536 exit 1; \
c2c83759
MD
537 fi
538
539maybe_bk_tools:
540.for _kernel in ${BUILDKERNELS}
541 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
542 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
543 echo "The kernel was build using buildworld tools which no" ; \
544 echo "longer appear to exist, quickkernel failed!" ; \
545 exit 1; \
546 fi; \
547 fi
548.endfor
e05c8c84 549
fc7aca3e 550bk_build_list:
984263bc
MD
551.if empty(BUILDKERNELS)
552 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
603cdb58 553 @echo ">>> Did you move your kernel configs from i386/conf to config/?"
984263bc
MD
554 @false
555.endif
fc7aca3e
MD
556
557bk_kernwarn:
984263bc
MD
558.if defined(KERNWARN)
559 @echo "--------------------------------------------------------------"
560 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
561 @echo "--------------------------------------------------------------"
562 @sleep 3
563.endif
564 @echo
fc7aca3e
MD
565
566# The buildkernel target rebuilds the specified kernels from scratch
567# using the crossbuild tools generated by the last buildworld. It is
568# the safest (but also the most time consuming) way to build a new kernel.
569#
570buildkernel: bk_tools bk_build_list bk_kernwarn
984263bc
MD
571.for _kernel in ${BUILDKERNELS}
572 @echo "--------------------------------------------------------------"
573 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
574 @echo "--------------------------------------------------------------"
575 @echo "===> ${_kernel}"
fc7aca3e
MD
576.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
577 rm -rf ${KRNLOBJDIR}/${_kernel}
578.else
e05c8c84 579 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
fc7aca3e 580 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
e05c8c84 581 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
fc7aca3e 582.endif
984263bc
MD
583 mkdir -p ${KRNLOBJDIR}
584.if !defined(NO_KERNELCONFIG)
585 cd ${KRNLCONFDIR}; \
1397f94a 586 PATH=${STRICTTMPPATH} \
984263bc
MD
587 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
588 ${KERNCONFDIR}/${_kernel}
9a359590
MD
589.endif
590.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
591 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
984263bc 592.endif
e05c8c84 593 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
984263bc
MD
594.if !defined(NO_KERNELDEPEND)
595 cd ${KRNLOBJDIR}/${_kernel}; \
596 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
597.endif
598 cd ${KRNLOBJDIR}/${_kernel}; \
599 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
600 @echo "--------------------------------------------------------------"
601 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
602 @echo "--------------------------------------------------------------"
603.endfor
604
fc7aca3e 605# The nativekernel target rebuilds the specified kernels from scratch
114580ac 606# using the system's standard compiler rather than using the crossbuild
fc7aca3e
MD
607# tools generated by the last buildworld. This is fairly safe if your
608# system is reasonable up-to-date.
e05c8c84 609#
fc7aca3e 610nativekernel: bk_build_list bk_kernwarn
e05c8c84
MD
611.for _kernel in ${BUILDKERNELS}
612 @echo "--------------------------------------------------------------"
613 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
614 @echo "--------------------------------------------------------------"
615 @echo "===> ${_kernel}"
fc7aca3e
MD
616.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
617 rm -rf ${KRNLOBJDIR}/${_kernel}
618.else
e05c8c84 619 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
fc7aca3e 620 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
e05c8c84 621 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
fc7aca3e 622.endif
e05c8c84
MD
623 mkdir -p ${KRNLOBJDIR}
624.if !defined(NO_KERNELCONFIG)
625 cd ${KRNLCONFDIR}; \
626 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
627 ${KERNCONFDIR}/${_kernel}
9a359590
MD
628.endif
629.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
630 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
e05c8c84
MD
631.endif
632 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
e05c8c84
MD
633 cd ${KRNLOBJDIR}/${_kernel}; \
634 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
635 ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
636.if !defined(NO_KERNELDEPEND)
637 cd ${KRNLOBJDIR}/${_kernel}; \
638 ${MAKE} KERNEL=${INSTKERNNAME} depend
639.endif
640 cd ${KRNLOBJDIR}/${_kernel}; \
641 ${MAKE} KERNEL=${INSTKERNNAME} all
642 @echo "--------------------------------------------------------------"
643 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
644 @echo "--------------------------------------------------------------"
645.endfor
646
fc7aca3e
MD
647# The quickkernel target rebuilds the specified kernels as quickly
648# as possible. It will use the native tools or the buildworld cross tools
649# based on whether the kernel was originally generated via buildkernel or
650# nativekernel. Config is rerun but the object hierarchy is not rebuilt,
651# nor is the make depend step run.
984263bc 652#
c2c83759 653quickkernel: maybe_bk_tools bk_build_list bk_kernwarn
fc7aca3e
MD
654.for _kernel in ${BUILDKERNELS}
655 @echo "--------------------------------------------------------------"
656 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
657 @echo "--------------------------------------------------------------"
658 @echo "===> ${_kernel}"
659.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
660.if !defined(NO_KERNELCONFIG)
661 cd ${KRNLCONFDIR}; \
662 PATH=${STRICTTMPPATH} \
663 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
664 ${KERNCONFDIR}/${_kernel}
665.endif
666 cd ${KRNLOBJDIR}/${_kernel}; \
667 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
668.else
669.if !defined(NO_KERNELCONFIG)
670 cd ${KRNLCONFDIR}; \
671 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
672 ${KERNCONFDIR}/${_kernel}
673.endif
674 cd ${KRNLOBJDIR}/${_kernel}; \
675 ${MAKE} KERNEL=${INSTKERNNAME} all
676.endif
677 @echo "--------------------------------------------------------------"
678 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
679 @echo "--------------------------------------------------------------"
680.endfor
681
682
984263bc
MD
683# installkernel
684#
685# Install the kernel defined by INSTALLKERNEL
686#
687installkernel reinstallkernel:
982b0507
MD
688 @echo "--------------------------------------------------------------"
689 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
690 @echo "--------------------------------------------------------------"
691.if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
984263bc 692 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
982b0507 693 ${IMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
c2c83759
MD
694.else
695 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
696 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
697.endif
984263bc 698
984263bc
MD
699#
700# most
701#
702# Build most of the user binaries on the existing system libs and includes.
703#
704most:
705 @echo "--------------------------------------------------------------"
706 @echo ">>> Building programs only"
707 @echo "--------------------------------------------------------------"
708.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
709 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all
710.endfor
711
712#
713# installmost
714#
715# Install the binaries built by the 'most' target. This does not include
716# libraries or include files.
717#
718installmost:
719 @echo "--------------------------------------------------------------"
720 @echo ">>> Installing programs only"
721 @echo "--------------------------------------------------------------"
722.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
723 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install
724.endfor
725
726#
727# ------------------------------------------------------------------------
728#
729# From here onwards are utility targets used by the 'make world' and
730# related targets. If your 'world' breaks, you may like to try to fix
731# the problem and manually run the following targets to attempt to
732# complete the build. Beware, this is *not* guaranteed to work, you
733# need to have a pretty good grip on the current state of the system
734# to attempt to manually finish it. If in doubt, 'make world' again.
735#
736
79aa78bc
MD
737# bootstrap-tools: Build all tools required to build all tools. Note that
738# order is important in a number of cases and also note that the bootstrap
739# and build tools stages have access to earlier binaries they themselves
740# had generated.
984263bc 741#
79aa78bc
MD
742# patch: older patch's do not have -i. This program must be built
743# first so other bootstrap tools that need to apply patches
744# can use it.
17030342
MD
745# [x]install: dependancies on various new install features
746# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
747# envs are not compatible with older objformat binaries.
748#
cecff5c1 749.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
984263bc
MD
750_strfile= games/fortune/strfile
751.endif
752
753bootstrap-tools:
062db326 754 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
1397f94a 755.for _tool in ${_strfile} \
1a7434d5 756 usr.bin/patch \
e2ea6619 757 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo bin/test \
11ba1493 758 bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
b07b69cc 759 bin/hostname bin/kill \
1397f94a 760 usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
1320c43d 761 usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/stat \
a96913f0 762 usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
1397f94a
MD
763 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
764 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
765 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
b07b69cc 766 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
e909bba2 767 usr.bin/cap_mkdb usr.bin/true usr.bin/false \
c02263c2 768 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
b6ef15c2 769 usr.bin/tail \
1397f94a 770 usr.sbin/chown usr.sbin/mtree usr.sbin/config \
ed5d5720 771 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
dea0b85a 772 gnu/usr.bin/texinfo gnu/usr.bin/grep gnu/usr.bin/sort \
32a7b49a 773 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb
1397f94a 774 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
984263bc
MD
775 cd ${.CURDIR}/${_tool}; \
776 ${MAKE} DIRPRFX=${_tool}/ obj; \
777 ${MAKE} DIRPRFX=${_tool}/ depend; \
778 ${MAKE} DIRPRFX=${_tool}/ all; \
1397f94a 779 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
984263bc 780.endfor
e05c8c84 781 touch ${BTOOLSDEST}/.bootstrap_done
984263bc 782
bceb727e 783# build-tools: Build special purpose build tools.
984263bc 784#
1397f94a
MD
785# XXX we may be able to remove or consolidate this into bootstrap-tools
786# now that we have the native helper (.nx/.no) infrastructure.
787#
cecff5c1 788.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
984263bc
MD
789_share= share/syscons/scrnmaps
790.endif
791
ddf7cc86
SS
792_gcc41_cross= gnu/usr.bin/cc41
793_gcc41_tools= gnu/usr.bin/cc41/cc_prep gnu/usr.bin/cc41/cc_tools
d8280c36 794.if !defined(NO_GCC44)
4f5ea479
SS
795_gcc44_cross= gnu/usr.bin/cc44
796_gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools
d8280c36 797.endif
c97b9141 798_custom_cross= libexec/customcc
123dec51 799_binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
17030342 800
984263bc 801build-tools:
96c51b62 802.for _tool in ${_gcc41_tools} ${_gcc44_tools} ${_libkrb5} ${_share}
1397f94a 803 ${ECHODIR} "===> ${_tool} (build-tools)"; \
984263bc
MD
804 cd ${.CURDIR}/${_tool}; \
805 ${MAKE} DIRPRFX=${_tool}/ obj; \
1397f94a
MD
806 ${MAKE} DIRPRFX=${_tool}/ depend; \
807 ${MAKE} DIRPRFX=${_tool}/ all; \
808 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
984263bc 809.endfor
e05c8c84 810 touch ${BTOOLSDEST}/.build_done
984263bc
MD
811
812#
813# cross-tools: Build cross-building tools
814#
984263bc
MD
815.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
816_btxld= usr.sbin/btxld
817.endif
818
819cross-tools:
da5b39ba 820.for _tool in ${_btxld} ${_binutils} \
97c14704 821 usr.bin/objformat \
96c51b62 822 ${_gcc41_cross} ${_gcc44_cross} ${_custom_cross}
1397f94a 823 ${ECHODIR} "===> ${_tool} (cross-tools)"; \
984263bc
MD
824 cd ${.CURDIR}/${_tool}; \
825 ${MAKE} DIRPRFX=${_tool}/ obj; \
826 ${MAKE} DIRPRFX=${_tool}/ depend; \
827 ${MAKE} DIRPRFX=${_tool}/ all; \
1397f94a 828 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
984263bc 829.endfor
e05c8c84 830 touch ${CTOOLSDEST}/.cross_done
984263bc
MD
831
832#
833# hierarchy - ensure that all the needed directories are present
834#
835hierarchy:
836 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
837
838#
839# libraries - build all libraries, and install them under ${DESTDIR}.
840#
841# The list of libraries with dependents (${_prebuild_libs}) and their
842# interdependencies (__L) are built automatically by the
843# ${.CURDIR}/tools/make_libdeps.sh script.
844#
5228fe46
MD
845# .makeenv does not work when bootstrapping from 4.x, so we must be sure
846# to specify the correct CCVER or 'cc' will not exec the correct compiler.
847#
984263bc 848libraries:
ddf7cc86
SS
849 cd ${.CURDIR}; \
850 HOST_CCVER=${HOST_CCVER} CCVER=gcc41 \
851 ${MAKE} -f Makefile.inc1 _startup_libs41;
d8280c36 852.if !defined(NO_GCC44)
4f5ea479
SS
853 cd ${.CURDIR}; \
854 HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \
855 ${MAKE} -f Makefile.inc1 _startup_libs44;
d8280c36 856.endif
29d48e65 857 cd ${.CURDIR}; \
984263bc
MD
858 ${MAKE} -f Makefile.inc1 _startup_libs; \
859 ${MAKE} -f Makefile.inc1 _prebuild_libs; \
860 ${MAKE} -f Makefile.inc1 _generic_libs;
e05c8c84 861 touch ${WORLDDEST}/.libraries_done
984263bc
MD
862
863# These dependencies are not automatically generated:
864#
fd8b66cd 865# gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
4f5ea479
SS
866# shared libraries for ELF. The target for _startup_libsXX is
867# specifically built using gccXX.
984263bc 868#
fd8b66cd 869_startup_libs41= gnu/lib/gcc41/csu gnu/lib/gcc41/libgcc
4f5ea479 870_startup_libs44= gnu/lib/gcc44/csu gnu/lib/gcc44/libgcc
e1da6819 871_startup_libs= lib/csu lib/libc lib/libc_rtld
984263bc 872
50ef37d2 873_prebuild_libs= lib/libbz2 lib/libz
0b153c05 874_prebuild_libs+= lib/libutil
984263bc
MD
875
876_generic_libs= gnu/lib
877
984263bc 878_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
7d1ab061 879 lib/libncurses/libncurses lib/libopie lib/libradius \
48d67717 880 lib/libsbuf lib/libtacplus lib/libm \
0d96fe5a 881 lib/libpam lib/libypclnt lib/lib${THREAD_LIB}
984263bc
MD
882
883lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
984263bc
MD
884
885_generic_libs+= lib
886
cecff5c1 887.if !defined(NO_CRYPT)
984263bc
MD
888.if !defined(NO_OPENSSL)
889_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
890.if !defined(NO_OPENSSH)
891_prebuild_libs+= secure/lib/libssh
892secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
893.endif
894.endif
895_generic_libs+= secure/lib
896.endif
897
898_generic_libs+= usr.bin/lex/lib
899
96c51b62 900.for _lib in ${_startup_libs41} ${_startup_libs44} \
4db2a28c 901 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
984263bc
MD
902${_lib}__L: .PHONY
903.if exists(${.CURDIR}/${_lib})
904 ${ECHODIR} "===> ${_lib}"; \
905 cd ${.CURDIR}/${_lib}; \
906 ${MAKE} DIRPRFX=${_lib}/ depend; \
907 ${MAKE} DIRPRFX=${_lib}/ all; \
908 ${MAKE} DIRPRFX=${_lib}/ install
909.endif
910.endfor
911
912_startup_libs: ${_startup_libs:S/$/__L/}
ddf7cc86 913_startup_libs41: ${_startup_libs41:S/$/__L/}
4f5ea479 914_startup_libs44: ${_startup_libs44:S/$/__L/}
984263bc
MD
915_prebuild_libs: ${_prebuild_libs:S/$/__L/}
916_generic_libs: ${_generic_libs:S/$/__L/}
917
1397f94a
MD
918# library targets must be ordered because there are inter-library
919# races (e.g. generation of tconfig.h)
920#
ddf7cc86 921.ORDER: ${_startup_libs41:S/$/__L/}
4f5ea479 922.ORDER: ${_startup_libs44:S/$/__L/}
1397f94a
MD
923.ORDER: ${_startup_libs:S/$/__L/}
924.ORDER: ${_prebuild_libs:S/$/__L/}
925.ORDER: ${_generic_libs:S/$/__L/}
926
927.for __target in clean cleandepend cleandir obj depend includes
984263bc
MD
928.for entry in ${SUBDIR}
929${entry}.${__target}__D: .PHONY
930 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
931 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
932 edir=${entry}.${MACHINE_ARCH}; \
933 cd ${.CURDIR}/$${edir}; \
934 else \
935 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
936 edir=${entry}; \
937 cd ${.CURDIR}/$${edir}; \
938 fi; \
939 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
940.endfor
941par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
1397f94a 942.ORDER: ${SUBDIR:S/$/.${__target}__D/}
984263bc 943.endfor
1397f94a 944.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
984263bc 945
cb0f1574
MD
946# The wmake target is used by /usr/bin/wmake to run make in a
947# world build environment.
948#
949wmake:
1397f94a 950 @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}'
cb0f1574 951
5c7da0d7
MD
952wmakeenv:
953 @echo '${WMAKEENV} /bin/sh'
954
1397f94a
MD
955bmake:
956 @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}'
957
17030342
MD
958bmakeenv:
959 @echo '${BMAKEENV} /bin/sh'
960
1397f94a
MD
961tmake:
962 @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}'
963
17030342
MD
964tmakeenv:
965 @echo '${TMAKEENV} /bin/sh'
966
66834c05
SS
967xmake:
968 @echo '${XMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${XMAKE_ARGS}'
969
970xmakeenv:
971 @echo '${XMAKEENV} /bin/sh'
972
984263bc 973.include <bsd.subdir.mk>
cb0f1574 974