Rename printf -> kprintf in sys/ and add some defines where necessary
[dragonfly.git] / sys / dev / netif / mii_layer / rlphy.c
CommitLineData
46ad174e
SZ
1/* $OpenBSD: rlphy.c,v 1.23 2006/05/16 02:24:45 brad Exp $ */
2
984263bc
MD
3/*
4 * Copyright (c) 1997, 1998, 1999
5 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. All advertising materials mentioning features or use of this software
16 * must display the following acknowledgement:
17 * This product includes software developed by Bill Paul.
18 * 4. Neither the name of the author nor the names of any co-contributors
19 * may be used to endorse or promote products derived from this software
20 * without specific prior written permission.
21 *
22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32 * THE POSSIBILITY OF SUCH DAMAGE.
33 *
34 * $FreeBSD: src/sys/dev/mii/rlphy.c,v 1.2.2.4 2002/11/08 21:53:49 semenu Exp $
e3869ec7 35 * $DragonFly: src/sys/dev/netif/mii_layer/rlphy.c,v 1.12 2006/12/22 23:26:20 swildner Exp $
984263bc
MD
36 */
37
38/*
39 * driver for RealTek 8139 internal PHYs
40 */
41
42#include <sys/param.h>
43#include <sys/systm.h>
44#include <sys/kernel.h>
45#include <sys/socket.h>
46#include <sys/bus.h>
47
48#include <net/if.h>
49#include <net/if_arp.h>
50#include <net/if_media.h>
51
1f2de5d4
MD
52#include "mii.h"
53#include "miivar.h"
54#include "miidevs.h"
984263bc 55
1f2de5d4 56#include "../rl/if_rlreg.h"
984263bc
MD
57
58#include "miibus_if.h"
59
46ad174e
SZ
60static int rlphy_probe(device_t);
61static int rlphy_attach(device_t);
62static int rlphy_service(struct mii_softc *, struct mii_data *, int);
63static void rlphy_status(struct mii_softc *);
984263bc
MD
64
65static device_method_t rlphy_methods[] = {
66 /* device interface */
67 DEVMETHOD(device_probe, rlphy_probe),
68 DEVMETHOD(device_attach, rlphy_attach),
46ad174e 69 DEVMETHOD(device_detach, ukphy_detach),
984263bc
MD
70 DEVMETHOD(device_shutdown, bus_generic_shutdown),
71 { 0, 0 }
72};
73
46ad174e
SZ
74static const struct mii_phydesc rlphys[] = {
75 MII_PHYDESC(REALTEK, RTL8201L),
76 MII_PHYDESC(ICPLUS, IP101),
77 MII_PHYDESC_NULL
78};
79
984263bc
MD
80static devclass_t rlphy_devclass;
81
82static driver_t rlphy_driver = {
83 "rlphy",
84 rlphy_methods,
85 sizeof(struct mii_softc)
86};
87
88DRIVER_MODULE(rlphy, miibus, rlphy_driver, rlphy_devclass, 0, 0);
89
69057b0d
SZ
90static int
91rlphy_probe(device_t dev)
984263bc 92{
46ad174e
SZ
93 struct mii_attach_args *ma = device_get_ivars(dev);
94 const struct mii_phydesc *mpd;
95 device_t parent;
984263bc 96
46ad174e
SZ
97 /*
98 * A "real" phy should get preference, but on the 8139 there
99 * is no phyid register.
100 */
101 mpd = mii_phy_match(ma, rlphys);
102 if (mpd != NULL) {
103 device_set_desc(dev, mpd->mpd_name);
104 return (0);
984263bc
MD
105 }
106
107 /*
108 * RealTek PHY doesn't have vendor/device ID registers:
109 * the rl driver fakes up a return value of all zeros.
110 */
111 if (MII_OUI(ma->mii_id1, ma->mii_id2) != 0 ||
112 MII_MODEL(ma->mii_id2) != 0)
113 return (ENXIO);
114
46ad174e
SZ
115 parent = device_get_parent(device_get_parent(dev));
116
984263bc
MD
117 /*
118 * Make sure the parent is an `rl'.
119 */
120 if (strcmp(device_get_name(parent), "rl") != 0)
121 return (ENXIO);
122
123 device_set_desc(dev, "RealTek internal media interface");
124
125 return (0);
126}
127
69057b0d
SZ
128static int
129rlphy_attach(device_t dev)
984263bc
MD
130{
131 struct mii_softc *sc;
132 struct mii_attach_args *ma;
133 struct mii_data *mii;
134
135 sc = device_get_softc(dev);
136 ma = device_get_ivars(dev);
b9bc8a8c 137 mii_softc_init(sc, ma);
984263bc
MD
138 sc->mii_dev = device_get_parent(dev);
139 mii = device_get_softc(sc->mii_dev);
140
141 /*
142 * The RealTek PHY can never be isolated, so never allow non-zero
143 * instances!
144 */
145 if (mii->mii_instance != 0) {
146 device_printf(dev, "ignoring this PHY, non-zero instance\n");
147 return(ENXIO);
148 }
149
150 LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
151
152 sc->mii_inst = mii->mii_instance;
984263bc
MD
153 sc->mii_service = rlphy_service;
154 sc->mii_pdata = mii;
155 mii->mii_instance++;
156
157 sc->mii_flags |= MIIF_NOISOLATE;
158
159#define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL)
160
161#if 0 /* See above. */
162 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst),
163 BMCR_ISO);
164#endif
165
166 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP, sc->mii_inst),
46ad174e 167 MII_MEDIA_100_TX);
984263bc
MD
168
169 mii_phy_reset(sc);
170
69057b0d
SZ
171 /*
172 * After PHY is reset, BMCR_AUTOEN will be cleared.
173 * If it is *not* turned on here, mii_pollstat() will
174 * lie about the active media until mii_mediachg() is
175 * called(in rl_init()).
176 */
177 PHY_WRITE(sc, MII_BMCR, BMCR_AUTOEN);
178
984263bc
MD
179 sc->mii_capabilities =
180 PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
181 device_printf(dev, " ");
182 if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0)
e3869ec7 183 kprintf("no media present");
984263bc 184 else
46ad174e 185 mii_phy_add_media(sc);
e3869ec7 186 kprintf("\n");
984263bc
MD
187#undef ADD
188 MIIBUS_MEDIAINIT(sc->mii_dev);
189 return(0);
190}
191
69057b0d
SZ
192static int
193rlphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
984263bc
MD
194{
195 struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
196
197 /*
198 * We can't isolate the RealTek PHY, so it has to be the only one!
199 */
46ad174e
SZ
200 KASSERT(IFM_INST(ife->ifm_media) == sc->mii_inst,
201 ("rlphy_service: can't isolate RealTek PHY"));
984263bc
MD
202
203 switch (cmd) {
204 case MII_POLLSTAT:
205 break;
206
207 case MII_MEDIACHG:
208 /*
209 * If the interface is not up, don't do anything.
210 */
211 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
212 break;
213
46ad174e 214 if (IFM_SUBTYPE(ife->ifm_media) == IFM_100_T4) {
984263bc
MD
215 /*
216 * XXX Not supported as a manual setting right now.
217 */
218 return (EINVAL);
984263bc 219 }
46ad174e
SZ
220
221 mii_phy_set_media(sc);
984263bc
MD
222 break;
223
224 case MII_TICK:
984263bc
MD
225 /*
226 * Is the interface even up?
227 */
228 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
229 return (0);
230
231 /*
46ad174e 232 * Only used for autonegotiation.
984263bc 233 */
46ad174e
SZ
234 if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
235 break;
984263bc
MD
236
237 /*
238 * The RealTek PHY's autonegotiation doesn't need to be
239 * kicked; it continues in the background.
240 */
241 break;
242 }
243
244 /* Update the media status. */
245 rlphy_status(sc);
246
247 /* Callback if something changed. */
46ad174e 248 mii_phy_update(sc, cmd);
984263bc
MD
249 return (0);
250}
251
69057b0d 252static void
46ad174e 253rlphy_status(struct mii_softc *sc)
984263bc 254{
46ad174e 255 struct mii_data *mii = sc->mii_pdata;
984263bc 256 int bmsr, bmcr, anlpar;
984263bc
MD
257
258 mii->mii_media_status = IFM_AVALID;
259 mii->mii_media_active = IFM_ETHER;
260
46ad174e 261 bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
984263bc
MD
262 if (bmsr & BMSR_LINK)
263 mii->mii_media_status |= IFM_ACTIVE;
264
46ad174e 265 bmcr = PHY_READ(sc, MII_BMCR);
984263bc
MD
266 if (bmcr & BMCR_ISO) {
267 mii->mii_media_active |= IFM_NONE;
268 mii->mii_media_status = 0;
269 return;
270 }
271
272 if (bmcr & BMCR_LOOP)
273 mii->mii_media_active |= IFM_LOOP;
274
275 if (bmcr & BMCR_AUTOEN) {
46ad174e
SZ
276 device_t parent;
277
984263bc
MD
278 /*
279 * NWay autonegotiation takes the highest-order common
280 * bit of the ANAR and ANLPAR (i.e. best media advertised
281 * both by us and our link partner).
282 */
283 if ((bmsr & BMSR_ACOMP) == 0) {
284 /* Erg, still trying, I guess... */
285 mii->mii_media_active |= IFM_NONE;
286 return;
287 }
288
46ad174e
SZ
289 if ((anlpar = PHY_READ(sc, MII_ANAR) &
290 PHY_READ(sc, MII_ANLPAR))) {
984263bc
MD
291 if (anlpar & ANLPAR_T4)
292 mii->mii_media_active |= IFM_100_T4;
293 else if (anlpar & ANLPAR_TX_FD)
294 mii->mii_media_active |= IFM_100_TX|IFM_FDX;
295 else if (anlpar & ANLPAR_TX)
296 mii->mii_media_active |= IFM_100_TX;
297 else if (anlpar & ANLPAR_10_FD)
298 mii->mii_media_active |= IFM_10_T|IFM_FDX;
299 else if (anlpar & ANLPAR_10)
300 mii->mii_media_active |= IFM_10_T;
301 else
302 mii->mii_media_active |= IFM_NONE;
303 return;
304 }
305 /*
306 * If the other side doesn't support NWAY, then the
307 * best we can do is determine if we have a 10Mbps or
308 * 100Mbps link. There's no way to know if the link
309 * is full or half duplex, so we default to half duplex
310 * and hope that the user is clever enough to manually
311 * change the media settings if we're wrong.
312 */
313
984263bc
MD
314 /*
315 * The RealTek PHY supports non-NWAY link speed
316 * detection, however it does not report the link
317 * detection results via the ANLPAR or BMSR registers.
318 * (What? RealTek doesn't do things the way everyone
319 * else does? I'm just shocked, shocked I tell you.)
320 * To determine the link speed, we have to do one
321 * of two things:
322 *
323 * - If this is a standalone RealTek RTL8201(L) PHY,
324 * we can determine the link speed by testing bit 0
325 * in the magic, vendor-specific register at offset
326 * 0x19.
327 *
328 * - If this is a RealTek MAC with integrated PHY, we
329 * can test the 'SPEED10' bit of the MAC's media status
330 * register.
331 */
46ad174e 332 parent = device_get_parent(sc->mii_dev);
984263bc 333 if (strcmp(device_get_name(parent), "rl") != 0) {
46ad174e 334 if (PHY_READ(sc, 0x0019) & 0x01)
984263bc
MD
335 mii->mii_media_active |= IFM_100_TX;
336 else
337 mii->mii_media_active |= IFM_10_T;
338 } else {
46ad174e 339 if (PHY_READ(sc, RL_MEDIASTAT) &
984263bc
MD
340 RL_MEDIASTAT_SPEED10)
341 mii->mii_media_active |= IFM_10_T;
342 else
343 mii->mii_media_active |= IFM_100_TX;
344 }
46ad174e
SZ
345 } else {
346 mii->mii_media_active = mii->mii_media.ifm_cur->ifm_media;
347 }
984263bc 348}