gold: Fix hardcoded library search path
[dragonfly.git] / sys / dev / netif / ie / if_iee16.h
CommitLineData
984263bc
MD
1/*
2 * Copyright (c) 1993, 1994, 1995
3 * Rodney W. Grimes, Milwaukie, Oregon 97222. All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer as
10 * the first lines of this file unmodified.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. All advertising materials mentioning features or use of this software
15 * must display the following acknowledgement:
16 * This product includes software developed by Rodney W. Grimes.
17 * 4. The name of the author may not be used to endorse or promote products
18 * derived from this software without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY RODNEY W. GRIMES ``AS IS'' AND ANY EXPRESS OR
21 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
22 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
23 * IN NO EVENT SHALL RODNEY W. GRIMES BE LIABLE FOR ANY DIRECT, INDIRECT,
24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
26 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
27 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
28 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
29 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30 *
31 * $FreeBSD: src/sys/dev/ie/if_iee16.h,v 1.1.10.1 2000/08/02 22:36:29 peter Exp $
1de703da 32 * $DragonFly: src/sys/dev/netif/ie/if_iee16.h,v 1.2 2003/06/17 04:28:27 dillon Exp $
984263bc
MD
33 */
34
35/*
36 * Definitions for EtherExpress 16
37 */
38
39#define IEE16_ATTN 0x06 /* channel attention control */
40#define IEE16_IRQ 0x07 /* IRQ configuration */
41#define IEE16_IRQ_ENABLE 0x08 /* enable board interrupts */
42
43#define IEE16_MEMDEC 0x0a /* memory decode */
44#define IEE16_MCTRL 0x0b /* memory control */
45#define IEE16_MCTRL_FMCS16 0x10 /* MEMCS16- for F000 */
46
47#define IEE16_MPCTRL 0x0c /* memory page control */
48#define IEE16_CONFIG 0x0d /* config register */
49#define IEE16_BART_LOOPBACK 0x02 /* loopback, 0=none, 1=loopback */
50#define IEE16_BART_IOCHRDY_LATE 0x10 /* iochrdy late control bit */
51#define IEE16_BART_IO_TEST_EN 0x20 /* enable iochrdy timing test */
52#define IEE16_BART_IO_RESULT 0x40 /* result of the iochrdy test */
53#define IEE16_BART_MCS16_TEST 0x80 /* enable memcs16 select test */
54
55#define IEE16_ECTRL 0x0e /* eeprom control */
56#define IEE16_ECTRL_EESK 0x01 /* EEPROM clock bit */
57#define IEE16_ECTRL_EECS 0x02 /* EEPROM chip select */
58#define IEE16_ECTRL_EEDI 0x04 /* EEPROM data in bit */
59#define IEE16_ECTRL_EEDO 0x08 /* EEPROM data out bit */
60#define IEE16_RESET_ASIC 0x40 /* reset ASIC (bart) pin */
61#define IEE16_RESET_586 0x80 /* reset 82586 pin */
62#define IEE16_ECTRL_MASK 0xb2 /* and'ed with ECTRL to enable read */
63
64#define IEE16_MECTRL 0x0f /* memory control, 0xe000 seg 'W' */
65#define IEE16_ID_PORT 0x0f /* auto-id port 'R' */
66
67#define IEE16_ID 0xbaba /* known id of EE16 */
68
69#define IEE16_EEPROM_READ 0x06 /* EEPROM read opcode */
70#define IEE16_EEPROM_OPSIZE1 0x03 /* size of EEPROM opcodes */
71#define IEE16_EEPROM_ADDR_SIZE 0x06 /* size of EEPROM address */
72
73/* Locations in the EEPROM */
74#define IEE16_EEPROM_CONFIG1 0x00 /* Configuration register 1 */
75#define IEE16_EEPROM_IRQ 0xE000 /* Encoded IRQ */
76#define IEE16_EEPROM_IRQ_SHIFT 13 /* To shift IRQ to lower bits */
77#define IEE16_EEPROM_LOCK_ADDR 0x01 /* contains the lock bit */
78#define IEE16_EEPROM_LOCKED 0x01 /* means that it is locked */
79
80#define IEE16_EEPROM_ENET_LOW 0x02 /* Ethernet address, low word */
81#define IEE16_EEPROM_ENET_MID 0x03 /* Ethernet address, middle word */
82#define IEE16_EEPROM_ENET_HIGH 0x04 /* Ethernet address, high word */