kernel/netgraph7: Replace usage of MALLOC/FREE with kmalloc/kfree here too.
[dragonfly.git] / sys / netgraph7 / ng_lmi.c
CommitLineData
b06ebda0
MD
1/*
2 * ng_lmi.c
3 */
4
5/*-
6 * Copyright (c) 1996-1999 Whistle Communications, Inc.
7 * All rights reserved.
8 *
9 * Subject to the following obligations and disclaimer of warranty, use and
10 * redistribution of this software, in source or object code forms, with or
11 * without modifications are expressly permitted by Whistle Communications;
12 * provided, however, that:
13 * 1. Any and all reproductions of the source or object code must include the
14 * copyright notice above and the following disclaimer of warranties; and
15 * 2. No rights are granted, in any manner or form, to use Whistle
16 * Communications, Inc. trademarks, including the mark "WHISTLE
17 * COMMUNICATIONS" on advertising, endorsements, or otherwise except as
18 * such appears in the above copyright notice or in the software.
19 *
20 * THIS SOFTWARE IS BEING PROVIDED BY WHISTLE COMMUNICATIONS "AS IS", AND
21 * TO THE MAXIMUM EXTENT PERMITTED BY LAW, WHISTLE COMMUNICATIONS MAKES NO
22 * REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, REGARDING THIS SOFTWARE,
23 * INCLUDING WITHOUT LIMITATION, ANY AND ALL IMPLIED WARRANTIES OF
24 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
25 * WHISTLE COMMUNICATIONS DOES NOT WARRANT, GUARANTEE, OR MAKE ANY
26 * REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF THE USE OF THIS
27 * SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE.
28 * IN NO EVENT SHALL WHISTLE COMMUNICATIONS BE LIABLE FOR ANY DAMAGES
29 * RESULTING FROM OR ARISING OUT OF ANY USE OF THIS SOFTWARE, INCLUDING
30 * WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
31 * PUNITIVE, OR CONSEQUENTIAL DAMAGES, PROCUREMENT OF SUBSTITUTE GOODS OR
32 * SERVICES, LOSS OF USE, DATA OR PROFITS, HOWEVER CAUSED AND UNDER ANY
33 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
34 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
35 * THIS SOFTWARE, EVEN IF WHISTLE COMMUNICATIONS IS ADVISED OF THE POSSIBILITY
36 * OF SUCH DAMAGE.
37 *
38 * Author: Julian Elischer <julian@freebsd.org>
39 *
40 * $FreeBSD: src/sys/netgraph/ng_lmi.c,v 1.25 2006/01/14 14:17:27 glebius Exp $
5a975a3d 41 * $DragonFly: src/sys/netgraph7/ng_lmi.c,v 1.2 2008/06/26 23:05:35 dillon Exp $
b06ebda0
MD
42 * $Whistle: ng_lmi.c,v 1.38 1999/11/01 09:24:52 julian Exp $
43 */
44
45/*
46 * This node performs the frame relay LMI protocol. It knows how
47 * to do ITU Annex A, ANSI Annex D, and "Group-of-Four" variants
48 * of the protocol.
49 *
50 * A specific protocol can be forced by connecting the corresponding
51 * hook to DLCI 0 or 1023 (as appropriate) of a frame relay link.
52 *
53 * Alternately, this node can do auto-detection of the LMI protocol
54 * by connecting hook "auto0" to DLCI 0 and "auto1023" to DLCI 1023.
55 */
56
57#include <sys/param.h>
58#include <sys/systm.h>
59#include <sys/errno.h>
60#include <sys/kernel.h>
61#include <sys/malloc.h>
62#include <sys/mbuf.h>
63#include <sys/syslog.h>
5a975a3d
MD
64#include "ng_message.h"
65#include "netgraph.h"
66#include "ng_lmi.h"
b06ebda0
MD
67
68/*
69 * Human readable names for LMI
70 */
71#define NAME_ANNEXA NG_LMI_HOOK_ANNEXA
72#define NAME_ANNEXD NG_LMI_HOOK_ANNEXD
73#define NAME_GROUP4 NG_LMI_HOOK_GROUPOF4
74#define NAME_NONE "None"
75
76#define MAX_DLCIS 128
77#define MAXDLCI 1023
78
79/*
80 * DLCI states
81 */
82#define DLCI_NULL 0
83#define DLCI_UP 1
84#define DLCI_DOWN 2
85
86/*
87 * Any received LMI frame should be at least this long
88 */
89#define LMI_MIN_LENGTH 8 /* XXX verify */
90
91/*
92 * Netgraph node methods and type descriptor
93 */
94static ng_constructor_t nglmi_constructor;
95static ng_rcvmsg_t nglmi_rcvmsg;
96static ng_shutdown_t nglmi_shutdown;
97static ng_newhook_t nglmi_newhook;
98static ng_rcvdata_t nglmi_rcvdata;
99static ng_disconnect_t nglmi_disconnect;
100static int nglmi_checkdata(hook_p hook, struct mbuf *m);
101
102static struct ng_type typestruct = {
103 .version = NG_ABI_VERSION,
104 .name = NG_LMI_NODE_TYPE,
105 .constructor = nglmi_constructor,
106 .rcvmsg = nglmi_rcvmsg,
107 .shutdown = nglmi_shutdown,
108 .newhook = nglmi_newhook,
109 .rcvdata = nglmi_rcvdata,
110 .disconnect = nglmi_disconnect,
111};
112NETGRAPH_INIT(lmi, &typestruct);
113
114/*
115 * Info and status per node
116 */
117struct nglmi_softc {
118 node_p node; /* netgraph node */
119 int flags; /* state */
120 int poll_count; /* the count of times for autolmi */
121 int poll_state; /* state of auto detect machine */
122 u_char remote_seq; /* sequence number the remote sent */
123 u_char local_seq; /* last sequence number we sent */
124 u_char protoID; /* 9 for group of 4, 8 otherwise */
125 u_long seq_retries; /* sent this how many time so far */
126 struct callout handle; /* see timeout(9) */
127 int liv_per_full;
128 int liv_rate;
129 int livs;
130 int need_full;
131 hook_p lmi_channel; /* whatever we ended up using */
132 hook_p lmi_annexA;
133 hook_p lmi_annexD;
134 hook_p lmi_group4;
135 hook_p lmi_channel0; /* auto-detect on DLCI 0 */
136 hook_p lmi_channel1023;/* auto-detect on DLCI 1023 */
137 char *protoname; /* cache protocol name */
138 u_char dlci_state[MAXDLCI + 1];
139 int invalidx; /* next dlci's to invalidate */
140};
141typedef struct nglmi_softc *sc_p;
142
143/*
144 * Other internal functions
145 */
146static void LMI_ticker(node_p node, hook_p hook, void *arg1, int arg2);
147static void nglmi_startup_fixed(sc_p sc, hook_p hook);
148static void nglmi_startup_auto(sc_p sc);
149static void nglmi_startup(sc_p sc);
150static void nglmi_inquire(sc_p sc, int full);
151static void ngauto_state_machine(sc_p sc);
152
153/*
154 * Values for 'flags' field
155 * NB: the SCF_CONNECTED flag is set if and only if the timer is running.
156 */
157#define SCF_CONNECTED 0x01 /* connected to something */
158#define SCF_AUTO 0x02 /* we are auto-detecting */
159#define SCF_FIXED 0x04 /* we are fixed from the start */
160
161#define SCF_LMITYPE 0x18 /* mask for determining Annex mode */
162#define SCF_NOLMI 0x00 /* no LMI type selected yet */
163#define SCF_ANNEX_A 0x08 /* running annex A mode */
164#define SCF_ANNEX_D 0x10 /* running annex D mode */
165#define SCF_GROUP4 0x18 /* running group of 4 */
166
167#define SETLMITYPE(sc, annex) \
168do { \
169 (sc)->flags &= ~SCF_LMITYPE; \
170 (sc)->flags |= (annex); \
171} while (0)
172
173#define NOPROTO(sc) (((sc)->flags & SCF_LMITYPE) == SCF_NOLMI)
174#define ANNEXA(sc) (((sc)->flags & SCF_LMITYPE) == SCF_ANNEX_A)
175#define ANNEXD(sc) (((sc)->flags & SCF_LMITYPE) == SCF_ANNEX_D)
176#define GROUP4(sc) (((sc)->flags & SCF_LMITYPE) == SCF_GROUP4)
177
178#define LMIPOLLSIZE 3
179#define LMI_PATIENCE 8 /* declare all DLCI DOWN after N LMI failures */
180
181/*
182 * Node constructor
183 */
184static int
185nglmi_constructor(node_p node)
186{
187 sc_p sc;
188
fc025606 189 sc = kmalloc(sizeof(*sc), M_NETGRAPH, M_WAITOK | M_NULLOK | M_ZERO);
b06ebda0
MD
190 if (sc == NULL)
191 return (ENOMEM);
192
193 NG_NODE_SET_PRIVATE(node, sc);
194 sc->node = node;
195
196 ng_callout_init(&sc->handle);
197 sc->protoname = NAME_NONE;
198 sc->liv_per_full = NG_LMI_SEQ_PER_FULL; /* make this dynamic */
199 sc->liv_rate = NG_LMI_KEEPALIVE_RATE;
200 return (0);
201}
202
203/*
204 * The LMI channel has a private pointer which is the same as the
205 * node private pointer. The debug channel has a NULL private pointer.
206 */
207static int
208nglmi_newhook(node_p node, hook_p hook, const char *name)
209{
210 sc_p sc = NG_NODE_PRIVATE(node);
211
212 if (strcmp(name, NG_LMI_HOOK_DEBUG) == 0) {
213 NG_HOOK_SET_PRIVATE(hook, NULL);
214 return (0);
215 }
216 if (sc->flags & SCF_CONNECTED) {
217 /* already connected, return an error */
218 return (EINVAL);
219 }
220 if (strcmp(name, NG_LMI_HOOK_ANNEXA) == 0) {
221 sc->lmi_annexA = hook;
222 NG_HOOK_SET_PRIVATE(hook, NG_NODE_PRIVATE(node));
223 sc->protoID = 8;
224 SETLMITYPE(sc, SCF_ANNEX_A);
225 sc->protoname = NAME_ANNEXA;
226 nglmi_startup_fixed(sc, hook);
227 } else if (strcmp(name, NG_LMI_HOOK_ANNEXD) == 0) {
228 sc->lmi_annexD = hook;
229 NG_HOOK_SET_PRIVATE(hook, NG_NODE_PRIVATE(node));
230 sc->protoID = 8;
231 SETLMITYPE(sc, SCF_ANNEX_D);
232 sc->protoname = NAME_ANNEXD;
233 nglmi_startup_fixed(sc, hook);
234 } else if (strcmp(name, NG_LMI_HOOK_GROUPOF4) == 0) {
235 sc->lmi_group4 = hook;
236 NG_HOOK_SET_PRIVATE(hook, NG_NODE_PRIVATE(node));
237 sc->protoID = 9;
238 SETLMITYPE(sc, SCF_GROUP4);
239 sc->protoname = NAME_GROUP4;
240 nglmi_startup_fixed(sc, hook);
241 } else if (strcmp(name, NG_LMI_HOOK_AUTO0) == 0) {
242 /* Note this, and if B is already installed, we're complete */
243 sc->lmi_channel0 = hook;
244 sc->protoname = NAME_NONE;
245 NG_HOOK_SET_PRIVATE(hook, NG_NODE_PRIVATE(node));
246 if (sc->lmi_channel1023)
247 nglmi_startup_auto(sc);
248 } else if (strcmp(name, NG_LMI_HOOK_AUTO1023) == 0) {
249 /* Note this, and if A is already installed, we're complete */
250 sc->lmi_channel1023 = hook;
251 sc->protoname = NAME_NONE;
252 NG_HOOK_SET_PRIVATE(hook, NG_NODE_PRIVATE(node));
253 if (sc->lmi_channel0)
254 nglmi_startup_auto(sc);
255 } else
256 return (EINVAL); /* unknown hook */
257 return (0);
258}
259
260/*
261 * We have just attached to a live (we hope) node.
262 * Fire out a LMI inquiry, and then start up the timers.
263 */
264static void
265LMI_ticker(node_p node, hook_p hook, void *arg1, int arg2)
266{
267 sc_p sc = NG_NODE_PRIVATE(node);
268
269 if (sc->flags & SCF_AUTO) {
270 ngauto_state_machine(sc);
271 ng_callout(&sc->handle, node, NULL, NG_LMI_POLL_RATE * hz,
272 LMI_ticker, NULL, 0);
273 } else {
274 if (sc->livs++ >= sc->liv_per_full) {
275 nglmi_inquire(sc, 1);
276 /* sc->livs = 0; *//* do this when we get the answer! */
277 } else {
278 nglmi_inquire(sc, 0);
279 }
280 ng_callout(&sc->handle, node, NULL, sc->liv_rate * hz,
281 LMI_ticker, NULL, 0);
282 }
283}
284
285static void
286nglmi_startup_fixed(sc_p sc, hook_p hook)
287{
288 sc->flags |= (SCF_FIXED | SCF_CONNECTED);
289 sc->lmi_channel = hook;
290 nglmi_startup(sc);
291}
292
293static void
294nglmi_startup_auto(sc_p sc)
295{
296 sc->flags |= (SCF_AUTO | SCF_CONNECTED);
297 sc->poll_state = 0; /* reset state machine */
298 sc->poll_count = 0;
299 nglmi_startup(sc);
300}
301
302static void
303nglmi_startup(sc_p sc)
304{
305 sc->remote_seq = 0;
306 sc->local_seq = 1;
307 sc->seq_retries = 0;
308 sc->livs = sc->liv_per_full - 1;
309 /* start off the ticker in 1 sec */
310 ng_callout(&sc->handle, sc->node, NULL, hz, LMI_ticker, NULL, 0);
311}
312
313static void
314nglmi_inquire(sc_p sc, int full)
315{
316 struct mbuf *m;
317 struct ng_tag_prio *ptag;
318 char *cptr, *start;
319 int error;
320
321 if (sc->lmi_channel == NULL)
322 return;
5a975a3d 323 MGETHDR(m, MB_DONTWAIT, MT_DATA);
b06ebda0
MD
324 if (m == NULL) {
325 log(LOG_ERR, "nglmi: unable to start up LMI processing\n");
326 return;
327 }
328 m->m_pkthdr.rcvif = NULL;
329
330 /* Attach a tag to packet, marking it of link level state priority, so
331 * that device driver would put it in the beginning of queue */
332
333 ptag = (struct ng_tag_prio *)m_tag_alloc(NGM_GENERIC_COOKIE, NG_TAG_PRIO,
5a975a3d 334 (sizeof(struct ng_tag_prio) - sizeof(struct m_tag)), MB_DONTWAIT);
b06ebda0
MD
335 if (ptag != NULL) { /* if it failed, well, it was optional anyhow */
336 ptag->priority = NG_PRIO_LINKSTATE;
337 ptag->discardability = -1;
338 m_tag_prepend(m, &ptag->tag);
339 }
340
341 m->m_data += 4; /* leave some room for a header */
342 cptr = start = mtod(m, char *);
343 /* add in the header for an LMI inquiry. */
344 *cptr++ = 0x03; /* UI frame */
345 if (GROUP4(sc))
346 *cptr++ = 0x09; /* proto discriminator */
347 else
348 *cptr++ = 0x08; /* proto discriminator */
349 *cptr++ = 0x00; /* call reference */
350 *cptr++ = 0x75; /* inquiry */
351
352 /* If we are Annex-D, add locking shift to codeset 5. */
353 if (ANNEXD(sc))
354 *cptr++ = 0x95; /* locking shift */
355 /* Add a request type */
356 if (ANNEXA(sc))
357 *cptr++ = 0x51; /* report type */
358 else
359 *cptr++ = 0x01; /* report type */
360 *cptr++ = 0x01; /* size = 1 */
361 if (full)
362 *cptr++ = 0x00; /* full */
363 else
364 *cptr++ = 0x01; /* partial */
365
366 /* Add a link verification IE */
367 if (ANNEXA(sc))
368 *cptr++ = 0x53; /* verification IE */
369 else
370 *cptr++ = 0x03; /* verification IE */
371 *cptr++ = 0x02; /* 2 extra bytes */
372 *cptr++ = sc->local_seq;
373 *cptr++ = sc->remote_seq;
374 sc->seq_retries++;
375
376 /* Send it */
377 m->m_len = m->m_pkthdr.len = cptr - start;
378 NG_SEND_DATA_ONLY(error, sc->lmi_channel, m);
379
380 /* If we've been sending requests for long enough, and there has
381 * been no response, then mark as DOWN, any DLCIs that are UP. */
382 if (sc->seq_retries == LMI_PATIENCE) {
383 int count;
384
385 for (count = 0; count < MAXDLCI; count++)
386 if (sc->dlci_state[count] == DLCI_UP)
387 sc->dlci_state[count] = DLCI_DOWN;
388 }
389}
390
391/*
392 * State machine for LMI auto-detect. The transitions are ordered
393 * to try the more likely possibilities first.
394 */
395static void
396ngauto_state_machine(sc_p sc)
397{
398 if ((sc->poll_count <= 0) || (sc->poll_count > LMIPOLLSIZE)) {
399 /* time to change states in the auto probe machine */
400 /* capture wild values of poll_count while we are at it */
401 sc->poll_count = LMIPOLLSIZE;
402 sc->poll_state++;
403 }
404 switch (sc->poll_state) {
405 case 7:
406 log(LOG_WARNING, "nglmi: no response from exchange\n");
407 default: /* capture bad states */
408 sc->poll_state = 1;
409 case 1:
410 sc->lmi_channel = sc->lmi_channel0;
411 SETLMITYPE(sc, SCF_ANNEX_D);
412 break;
413 case 2:
414 sc->lmi_channel = sc->lmi_channel1023;
415 SETLMITYPE(sc, SCF_ANNEX_D);
416 break;
417 case 3:
418 sc->lmi_channel = sc->lmi_channel0;
419 SETLMITYPE(sc, SCF_ANNEX_A);
420 break;
421 case 4:
422 sc->lmi_channel = sc->lmi_channel1023;
423 SETLMITYPE(sc, SCF_GROUP4);
424 break;
425 case 5:
426 sc->lmi_channel = sc->lmi_channel1023;
427 SETLMITYPE(sc, SCF_ANNEX_A);
428 break;
429 case 6:
430 sc->lmi_channel = sc->lmi_channel0;
431 SETLMITYPE(sc, SCF_GROUP4);
432 break;
433 }
434
435 /* send an inquirey encoded appropriatly */
436 nglmi_inquire(sc, 0);
437 sc->poll_count--;
438}
439
440/*
441 * Receive a netgraph control message.
442 */
443static int
444nglmi_rcvmsg(node_p node, item_p item, hook_p lasthook)
445{
446 sc_p sc = NG_NODE_PRIVATE(node);
447 struct ng_mesg *resp = NULL;
448 int error = 0;
449 struct ng_mesg *msg;
450
451 NGI_GET_MSG(item, msg);
452 switch (msg->header.typecookie) {
453 case NGM_GENERIC_COOKIE:
454 switch (msg->header.cmd) {
455 case NGM_TEXT_STATUS:
456 {
457 char *arg;
458 int pos, count;
459
5a975a3d 460 NG_MKRESPONSE(resp, msg, NG_TEXTRESPONSE, M_WAITOK | M_NULLOK);
b06ebda0
MD
461 if (resp == NULL) {
462 error = ENOMEM;
463 break;
464 }
465 arg = resp->data;
466 pos = sprintf(arg, "protocol %s ", sc->protoname);
467 if (sc->flags & SCF_FIXED)
468 pos += sprintf(arg + pos, "fixed\n");
469 else if (sc->flags & SCF_AUTO)
470 pos += sprintf(arg + pos, "auto-detecting\n");
471 else
472 pos += sprintf(arg + pos, "auto on dlci %d\n",
473 (sc->lmi_channel == sc->lmi_channel0) ?
474 0 : 1023);
475 pos += sprintf(arg + pos,
476 "keepalive period: %d seconds\n", sc->liv_rate);
477 pos += sprintf(arg + pos,
478 "unacknowledged keepalives: %ld\n",
479 sc->seq_retries);
480 for (count = 0;
481 ((count <= MAXDLCI)
482 && (pos < (NG_TEXTRESPONSE - 20)));
483 count++) {
484 if (sc->dlci_state[count]) {
485 pos += sprintf(arg + pos,
486 "dlci %d %s\n", count,
487 (sc->dlci_state[count]
488 == DLCI_UP) ? "up" : "down");
489 }
490 }
491 resp->header.arglen = pos + 1;
492 break;
493 }
494 default:
495 error = EINVAL;
496 break;
497 }
498 break;
499 case NGM_LMI_COOKIE:
500 switch (msg->header.cmd) {
501 case NGM_LMI_GET_STATUS:
502 {
503 struct nglmistat *stat;
504 int k;
505
5a975a3d 506 NG_MKRESPONSE(resp, msg, sizeof(*stat), M_WAITOK | M_NULLOK);
b06ebda0
MD
507 if (!resp) {
508 error = ENOMEM;
509 break;
510 }
511 stat = (struct nglmistat *) resp->data;
512 strncpy(stat->proto,
513 sc->protoname, sizeof(stat->proto) - 1);
514 strncpy(stat->hook,
515 sc->protoname, sizeof(stat->hook) - 1);
516 stat->autod = !!(sc->flags & SCF_AUTO);
517 stat->fixed = !!(sc->flags & SCF_FIXED);
518 for (k = 0; k <= MAXDLCI; k++) {
519 switch (sc->dlci_state[k]) {
520 case DLCI_UP:
521 stat->up[k / 8] |= (1 << (k % 8));
522 /* fall through */
523 case DLCI_DOWN:
524 stat->seen[k / 8] |= (1 << (k % 8));
525 break;
526 }
527 }
528 break;
529 }
530 default:
531 error = EINVAL;
532 break;
533 }
534 break;
535 default:
536 error = EINVAL;
537 break;
538 }
539
540 NG_RESPOND_MSG(error, node, item, resp);
541 NG_FREE_MSG(msg);
542 return (error);
543}
544
545#define STEPBY(stepsize) \
546 do { \
547 packetlen -= (stepsize); \
548 data += (stepsize); \
549 } while (0)
550
551/*
552 * receive data, and use it to update our status.
553 * Anything coming in on the debug port is discarded.
554 */
555static int
556nglmi_rcvdata(hook_p hook, item_p item)
557{
558 sc_p sc = NG_NODE_PRIVATE(NG_HOOK_NODE(hook));
559 const u_char *data;
560 unsigned short dlci;
561 u_short packetlen;
562 int resptype_seen = 0;
563 struct mbuf *m;
564
565 NGI_GET_M(item, m);
566 NG_FREE_ITEM(item);
567 if (NG_HOOK_PRIVATE(hook) == NULL) {
568 goto drop;
569 }
570 packetlen = m->m_len;
571
572 /* XXX what if it's more than 1 mbuf? */
573 if ((packetlen > MHLEN) && !(m->m_flags & M_EXT)) {
574 log(LOG_WARNING, "nglmi: packetlen (%d) too big\n", packetlen);
575 goto drop;
576 }
577 if (m->m_len < packetlen && (m = m_pullup(m, packetlen)) == NULL) {
578 log(LOG_WARNING,
579 "nglmi: m_pullup failed for %d bytes\n", packetlen);
580 return (0);
581 }
582 if (nglmi_checkdata(hook, m) == 0)
583 return (0);
584
585 /* pass the first 4 bytes (already checked in the nglmi_checkdata()) */
586 data = mtod(m, const u_char *);
587 STEPBY(4);
588
589 /* Now check if there is a 'locking shift'. This is only seen in
590 * Annex D frames. don't bother checking, we already did that. Don't
591 * increment immediatly as it might not be there. */
592 if (ANNEXD(sc))
593 STEPBY(1);
594
595 /* If we get this far we should consider that it is a legitimate
596 * frame and we know what it is. */
597 if (sc->flags & SCF_AUTO) {
598 /* note the hook that this valid channel came from and drop
599 * out of auto probe mode. */
600 if (ANNEXA(sc))
601 sc->protoname = NAME_ANNEXA;
602 else if (ANNEXD(sc))
603 sc->protoname = NAME_ANNEXD;
604 else if (GROUP4(sc))
605 sc->protoname = NAME_GROUP4;
606 else {
607 log(LOG_ERR, "nglmi: No known type\n");
608 goto drop;
609 }
610 sc->lmi_channel = hook;
611 sc->flags &= ~SCF_AUTO;
612 log(LOG_INFO, "nglmi: auto-detected %s LMI on DLCI %d\n",
613 sc->protoname, hook == sc->lmi_channel0 ? 0 : 1023);
614 }
615
616 /* While there is more data in the status packet, keep processing
617 * status items. First make sure there is enough data for the
618 * segment descriptor's length field. */
619 while (packetlen >= 2) {
620 u_int segtype = data[0];
621 u_int segsize = data[1];
622
623 /* Now that we know how long it claims to be, make sure
624 * there is enough data for the next seg. */
625 if (packetlen < segsize + 2)
626 break;
627 switch (segtype) {
628 case 0x01:
629 case 0x51:
630 if (resptype_seen) {
631 log(LOG_WARNING, "nglmi: dup MSGTYPE\n");
632 goto nextIE;
633 }
634 resptype_seen++;
635 /* The remote end tells us what kind of response
636 * this is. Only expect a type 0 or 1. if we are a
637 * full status, invalidate a few DLCIs just to see
638 * that they are still ok. */
639 if (segsize != 1)
640 goto nextIE;
641 switch (data[2]) {
642 case 1:
643 /* partial status, do no extra processing */
644 break;
645 case 0:
646 {
647 int count = 0;
648 int idx = sc->invalidx;
649
650 for (count = 0; count < 10; count++) {
651 if (idx > MAXDLCI)
652 idx = 0;
653 if (sc->dlci_state[idx] == DLCI_UP)
654 sc->dlci_state[idx] = DLCI_DOWN;
655 idx++;
656 }
657 sc->invalidx = idx;
658 /* we got and we wanted one. relax
659 * now.. but don't reset to 0 if it
660 * was unrequested. */
661 if (sc->livs > sc->liv_per_full)
662 sc->livs = 0;
663 break;
664 }
665 }
666 break;
667 case 0x03:
668 case 0x53:
669 /* The remote tells us what it thinks the sequence
670 * numbers are. If it's not size 2, it must be a
671 * duplicate to have gotten this far, skip it. */
672 if (segsize != 2)
673 goto nextIE;
674 sc->remote_seq = data[2];
675 if (sc->local_seq == data[3]) {
676 sc->local_seq++;
677 sc->seq_retries = 0;
678 /* Note that all 3 Frame protocols seem to
679 * not like 0 as a sequence number. */
680 if (sc->local_seq == 0)
681 sc->local_seq = 1;
682 }
683 break;
684 case 0x07:
685 case 0x57:
686 /* The remote tells us about a DLCI that it knows
687 * about. There may be many of these in a single
688 * status response */
689 switch (segsize) {
690 case 6:/* only on 'group of 4' */
691 dlci = ((u_short) data[2] & 0xff) << 8;
692 dlci |= (data[3] & 0xff);
693 if ((dlci < 1024) && (dlci > 0)) {
694 /* XXX */
695 }
696 break;
697 case 3:
698 dlci = ((u_short) data[2] & 0x3f) << 4;
699 dlci |= ((data[3] & 0x78) >> 3);
700 if ((dlci < 1024) && (dlci > 0)) {
701 /* set up the bottom half of the
702 * support for that dlci if it's not
703 * already been done */
704 /* store this information somewhere */
705 }
706 break;
707 default:
708 goto nextIE;
709 }
710 if (sc->dlci_state[dlci] != DLCI_UP) {
711 /* bring new DLCI to life */
712 /* may do more here some day */
713 if (sc->dlci_state[dlci] != DLCI_DOWN)
714 log(LOG_INFO,
715 "nglmi: DLCI %d became active\n",
716 dlci);
717 sc->dlci_state[dlci] = DLCI_UP;
718 }
719 break;
720 }
721nextIE:
722 STEPBY(segsize + 2);
723 }
724 NG_FREE_M(m);
725 return (0);
726
727drop:
728 NG_FREE_M(m);
729 return (EINVAL);
730}
731
732/*
733 * Check that a packet is entirely kosha.
734 * return 1 of ok, and 0 if not.
735 * All data is discarded if a 0 is returned.
736 */
737static int
738nglmi_checkdata(hook_p hook, struct mbuf *m)
739{
740 sc_p sc = NG_NODE_PRIVATE(NG_HOOK_NODE(hook));
741 const u_char *data;
742 u_short packetlen;
743 unsigned short dlci;
744 u_char type;
745 u_char nextbyte;
746 int seq_seen = 0;
747 int resptype_seen = 0; /* 0 , 1 (partial) or 2 (full) */
748 int highest_dlci = 0;
749
750 packetlen = m->m_len;
751 data = mtod(m, const u_char *);
752 if (*data != 0x03) {
753 log(LOG_WARNING, "nglmi: unexpected value in LMI(%d)\n", 1);
754 goto reject;
755 }
756 STEPBY(1);
757
758 /* look at the protocol ID */
759 nextbyte = *data;
760 if (sc->flags & SCF_AUTO) {
761 SETLMITYPE(sc, SCF_NOLMI); /* start with a clean slate */
762 switch (nextbyte) {
763 case 0x8:
764 sc->protoID = 8;
765 break;
766 case 0x9:
767 SETLMITYPE(sc, SCF_GROUP4);
768 sc->protoID = 9;
769 break;
770 default:
771 log(LOG_WARNING, "nglmi: bad Protocol ID(%d)\n",
772 (int) nextbyte);
773 goto reject;
774 }
775 } else {
776 if (nextbyte != sc->protoID) {
777 log(LOG_WARNING, "nglmi: unexpected Protocol ID(%d)\n",
778 (int) nextbyte);
779 goto reject;
780 }
781 }
782 STEPBY(1);
783
784 /* check call reference (always null in non ISDN frame relay) */
785 if (*data != 0x00) {
786 log(LOG_WARNING, "nglmi: unexpected Call Reference (0x%x)\n",
787 data[-1]);
788 goto reject;
789 }
790 STEPBY(1);
791
792 /* check message type */
793 switch ((type = *data)) {
794 case 0x75: /* Status enquiry */
795 log(LOG_WARNING, "nglmi: unexpected message type(0x%x)\n",
796 data[-1]);
797 goto reject;
798 case 0x7D: /* Status message */
799 break;
800 default:
801 log(LOG_WARNING,
802 "nglmi: unexpected msg type(0x%x) \n", (int) type);
803 goto reject;
804 }
805 STEPBY(1);
806
807 /* Now check if there is a 'locking shift'. This is only seen in
808 * Annex D frames. Don't increment immediately as it might not be
809 * there. */
810 nextbyte = *data;
811 if (sc->flags & SCF_AUTO) {
812 if (!(GROUP4(sc))) {
813 if (nextbyte == 0x95) {
814 SETLMITYPE(sc, SCF_ANNEX_D);
815 STEPBY(1);
816 } else
817 SETLMITYPE(sc, SCF_ANNEX_A);
818 } else if (nextbyte == 0x95) {
819 log(LOG_WARNING, "nglmi: locking shift seen in G4\n");
820 goto reject;
821 }
822 } else {
823 if (ANNEXD(sc)) {
824 if (*data == 0x95)
825 STEPBY(1);
826 else {
827 log(LOG_WARNING,
828 "nglmi: locking shift missing\n");
829 goto reject;
830 }
831 } else if (*data == 0x95) {
832 log(LOG_WARNING, "nglmi: locking shift seen\n");
833 goto reject;
834 }
835 }
836
837 /* While there is more data in the status packet, keep processing
838 * status items. First make sure there is enough data for the
839 * segment descriptor's length field. */
840 while (packetlen >= 2) {
841 u_int segtype = data[0];
842 u_int segsize = data[1];
843
844 /* Now that we know how long it claims to be, make sure
845 * there is enough data for the next seg. */
846 if (packetlen < (segsize + 2)) {
847 log(LOG_WARNING, "nglmi: IE longer than packet\n");
848 break;
849 }
850 switch (segtype) {
851 case 0x01:
852 case 0x51:
853 /* According to MCI's HP analyser, we should just
854 * ignore if there is mor ethan one of these (?). */
855 if (resptype_seen) {
856 log(LOG_WARNING, "nglmi: dup MSGTYPE\n");
857 goto nextIE;
858 }
859 if (segsize != 1) {
860 log(LOG_WARNING, "nglmi: MSGTYPE wrong size\n");
861 goto reject;
862 }
863 /* The remote end tells us what kind of response
864 * this is. Only expect a type 0 or 1. if it was a
865 * full (type 0) check we just asked for a type
866 * full. */
867 switch (data[2]) {
868 case 1:/* partial */
869 if (sc->livs > sc->liv_per_full) {
870 log(LOG_WARNING,
871 "nglmi: LIV when FULL expected\n");
872 goto reject; /* need full */
873 }
874 resptype_seen = 1;
875 break;
876 case 0:/* full */
877 /* Full response is always acceptable */
878 resptype_seen = 2;
879 break;
880 default:
881 log(LOG_WARNING,
882 "nglmi: Unknown report type %d\n", data[2]);
883 goto reject;
884 }
885 break;
886 case 0x03:
887 case 0x53:
888 /* The remote tells us what it thinks the sequence
889 * numbers are. I would have thought that there
890 * needs to be one and only one of these, but MCI
891 * want us to just ignore extras. (?) */
892 if (resptype_seen == 0) {
893 log(LOG_WARNING, "nglmi: no TYPE before SEQ\n");
894 goto reject;
895 }
896 if (seq_seen != 0) /* already seen seq numbers */
897 goto nextIE;
898 if (segsize != 2) {
899 log(LOG_WARNING, "nglmi: bad SEQ sts size\n");
900 goto reject;
901 }
902 if (sc->local_seq != data[3]) {
903 log(LOG_WARNING, "nglmi: unexpected SEQ\n");
904 goto reject;
905 }
906 seq_seen = 1;
907 break;
908 case 0x07:
909 case 0x57:
910 /* The remote tells us about a DLCI that it knows
911 * about. There may be many of these in a single
912 * status response */
913 if (seq_seen != 1) { /* already seen seq numbers? */
914 log(LOG_WARNING,
915 "nglmi: No sequence before DLCI\n");
916 goto reject;
917 }
918 if (resptype_seen != 2) { /* must be full */
919 log(LOG_WARNING,
920 "nglmi: No resp type before DLCI\n");
921 goto reject;
922 }
923 if (GROUP4(sc)) {
924 if (segsize != 6) {
925 log(LOG_WARNING,
926 "nglmi: wrong IE segsize\n");
927 goto reject;
928 }
929 dlci = ((u_short) data[2] & 0xff) << 8;
930 dlci |= (data[3] & 0xff);
931 } else {
932 if (segsize != 3) {
933 log(LOG_WARNING,
934 "nglmi: DLCI headersize of %d"
935 " not supported\n", segsize - 1);
936 goto reject;
937 }
938 dlci = ((u_short) data[2] & 0x3f) << 4;
939 dlci |= ((data[3] & 0x78) >> 3);
940 }
941 /* async can only have one of these */
942#if 0 /* async not yet accepted */
943 if (async && highest_dlci) {
944 log(LOG_WARNING,
945 "nglmi: Async with > 1 DLCI\n");
946 goto reject;
947 }
948#endif
949 /* Annex D says these will always be Ascending, but
950 * the HP test for G4 says we should accept
951 * duplicates, so for now allow that. ( <= vs. < ) */
952#if 0
953 /* MCI tests want us to accept out of order for AnxD */
954 if ((!GROUP4(sc)) && (dlci < highest_dlci)) {
955 /* duplicate or mis-ordered dlci */
956 /* (spec says they will increase in number) */
957 log(LOG_WARNING, "nglmi: DLCI out of order\n");
958 goto reject;
959 }
960#endif
961 if (dlci > 1023) {
962 log(LOG_WARNING, "nglmi: DLCI out of range\n");
963 goto reject;
964 }
965 highest_dlci = dlci;
966 break;
967 default:
968 log(LOG_WARNING,
969 "nglmi: unknown LMI segment type %d\n", segtype);
970 }
971nextIE:
972 STEPBY(segsize + 2);
973 }
974 if (packetlen != 0) { /* partial junk at end? */
975 log(LOG_WARNING,
976 "nglmi: %d bytes extra at end of packet\n", packetlen);
977 goto print;
978 }
979 if (resptype_seen == 0) {
980 log(LOG_WARNING, "nglmi: No response type seen\n");
981 goto reject; /* had no response type */
982 }
983 if (seq_seen == 0) {
984 log(LOG_WARNING, "nglmi: No sequence numbers seen\n");
985 goto reject; /* had no sequence numbers */
986 }
987 return (1);
988
989print:
990 {
991 int i, j, k, pos;
992 char buf[100];
993 int loc;
994 const u_char *bp = mtod(m, const u_char *);
995
996 k = i = 0;
997 loc = (m->m_len - packetlen);
998 log(LOG_WARNING, "nglmi: error at location %d\n", loc);
999 while (k < m->m_len) {
1000 pos = 0;
1001 j = 0;
1002 while ((j++ < 16) && k < m->m_len) {
1003 pos += sprintf(buf + pos, "%c%02x",
1004 ((loc == k) ? '>' : ' '),
1005 bp[k]);
1006 k++;
1007 }
1008 if (i == 0)
1009 log(LOG_WARNING, "nglmi: packet data:%s\n", buf);
1010 else
1011 log(LOG_WARNING, "%04d :%s\n", k, buf);
1012 i++;
1013 }
1014 }
1015 return (1);
1016reject:
1017 {
1018 int i, j, k, pos;
1019 char buf[100];
1020 int loc;
1021 const u_char *bp = mtod(m, const u_char *);
1022
1023 k = i = 0;
1024 loc = (m->m_len - packetlen);
1025 log(LOG_WARNING, "nglmi: error at location %d\n", loc);
1026 while (k < m->m_len) {
1027 pos = 0;
1028 j = 0;
1029 while ((j++ < 16) && k < m->m_len) {
1030 pos += sprintf(buf + pos, "%c%02x",
1031 ((loc == k) ? '>' : ' '),
1032 bp[k]);
1033 k++;
1034 }
1035 if (i == 0)
1036 log(LOG_WARNING, "nglmi: packet data:%s\n", buf);
1037 else
1038 log(LOG_WARNING, "%04d :%s\n", k, buf);
1039 i++;
1040 }
1041 }
1042 NG_FREE_M(m);
1043 return (0);
1044}
1045
1046/*
1047 * Do local shutdown processing..
1048 * Cut any remaining links and free our local resources.
1049 */
1050static int
1051nglmi_shutdown(node_p node)
1052{
1053 const sc_p sc = NG_NODE_PRIVATE(node);
1054
1055 NG_NODE_SET_PRIVATE(node, NULL);
1056 NG_NODE_UNREF(sc->node);
fc025606 1057 kfree(sc, M_NETGRAPH);
b06ebda0
MD
1058 return (0);
1059}
1060
1061/*
1062 * Hook disconnection
1063 * For this type, removal of any link except "debug" destroys the node.
1064 */
1065static int
1066nglmi_disconnect(hook_p hook)
1067{
1068 const sc_p sc = NG_NODE_PRIVATE(NG_HOOK_NODE(hook));
1069
1070 /* OK to remove debug hook(s) */
1071 if (NG_HOOK_PRIVATE(hook) == NULL)
1072 return (0);
1073
1074 /* Stop timer if it's currently active */
1075 if (sc->flags & SCF_CONNECTED)
1076 ng_uncallout(&sc->handle, sc->node);
1077
1078 /* Self-destruct */
1079 if (NG_NODE_IS_VALID(NG_HOOK_NODE(hook)))
1080 ng_rmnode_self(NG_HOOK_NODE(hook));
1081 return (0);
1082}
1083