dsynth - Add logfile tracking on the ncurses display
[dragonfly.git] / etc / gettytab
CommitLineData
45f7d17f 1# $FreeBSD: head/etc/gettytab 258864 2013-12-03 04:13:55Z eadler $
984263bc
MD
2# from: @(#)gettytab 5.14 (Berkeley) 3/27/91
3#
4# Most of the table entries here are just copies of the old getty table,
5# it is by no means certain, or even likely, that any of them are optimal
6# for any purpose whatever. Nor is it likely that more than a couple are
7# even correct.
8#
9# The default gettytab entry, used to set defaults for all other
10# entries, and in cases where getty is called with no table name.
11#
12# cb, ce and ck are desirable on most crt's. The non-crt entries need to
13# be changed to turn them off (:cb@:ce@:ck@:).
14#
15# lc should always be on; it's a remainder of some stone age when there
16# have been terminals around not being able of handling lower-case
17# characters. Those terminals aren't supported any longer, but getty is
18# `smart' about them by default.
19#
20# Parity defaults to even, but the Pc entry and all the `std' entries
21# specify no parity. The different parities are:
45f7d17f 22# (none): same as ep for getty. login will use terminal as is.
984263bc
MD
23# ep: getty will use raw mode (cs8 -parenb) (unless rw is set) and
24# fake parity. login will use even parity (cs7 parenb -parodd).
25# op: same as ep except odd parity (cs7 parenb parodd) for login.
45f7d17f 26# getty will fake odd parity as well.
984263bc
MD
27# ap: same as ep except -inpck instead of inpck for login.
28# ap overrides op and ep.
29# np: 1. don't fake parity in getty. The fake parity garbles
30# characters on non-terminals (like pccons) that don't
31# support parity. It would probably better for getty not to
32# try to fake parity. It could just use cbreak mode so as
33# not to force cs8 and let the hardware handle the parity.
34# login has to be rely on the hardware anyway.
45f7d17f
EA
35# 2. set cs8 -parenb -istrip -inpck.
36# ep:op: same as ap.
984263bc
MD
37#
38default:\
39 :cb:ce:ck:lc:fd#1000:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:\
40 :if=/etc/issue:
41
42#
43# Fixed speed entries
44#
45# The "std.NNN" names are known to the special case
46# portselector code in getty, however they can
47# be assigned to any table desired.
48# The "NNN-baud" names are known to the special case
49# autobaud code in getty, and likewise can
50# be assigned to any table desired (hopefully the same speed).
51#
f9b56c4c
EA
52std:\
53 :np:sp#0:
984263bc
MD
54a|std.110|110-baud:\
55 :np:nd#1:cd#1:uc:sp#110:
56b|std.134|134.5-baud:\
57 :np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl:
581|std.150|150-baud:\
59 :np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 :
60c|std.300|300-baud:\
61 :np:nd#1:cd#1:sp#300:
62d|std.600|600-baud:\
63 :np:nd#1:cd#1:sp#600:
64f|std.1200|1200-baud:\
65 :np:fd#1:sp#1200:
666|std.2400|2400-baud:\
67 :np:sp#2400:
687|std.4800|4800-baud:\
69 :np:sp#4800:
702|std.9600|9600-baud:\
71 :np:sp#9600:
72g|std.19200|19200-baud:\
73 :np:sp#19200:
74std.38400|38400-baud:\
75 :np:sp#38400:
76std.57600|57600-baud:\
77 :np:sp#57600:
78std.115200|115200-baud:\
79 :np:sp#115200:
80std.230400|230400-baud:\
81 :np:sp#230400:
82
83#
84# Entry specifying explicit device settings. See termios(4) and
85# /usr/include/termios.h, too. The entry forces the tty into
86# CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control.
87#
88# cflags: CLOCAL | HUPCL | CREAD | CS8
89# oflags: OPOST | ONLCR | OXTABS
90# iflags: IXOFF | IXON | ICRNL | IGNPAR
91# lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE
92#
93# The `0' flags don't have input enabled. The `1' flags don't echo.
94# (Echoing is done inside getty itself.)
95#
96local.9600|CLOCAL tty @ 9600 Bd:\
97 :c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:\
98 :o0#0x00000007:o1#0x00000002:o2#0x00000007:\
99 :i0#0x00000704:i1#0x00000000:i2#0x00000704:\
100 :l0#0x000005cf:l1#0x00000000:l2#0x000005cf:\
45f7d17f 101 :sp#9600:np:
984263bc
MD
102
103#
104# Dial in rotary tables, speed selection via 'break'
105#
1060|d300|Dial-300:\
107 :nx=d1200:cd#2:sp#300:
108d1200|Dial-1200:\
109 :nx=d150:fd#1:sp#1200:
110d150|Dial-150:\
111 :nx=d110:lm@:tc=150-baud:
112d110|Dial-110:\
113 :nx=d300:tc=300-baud:
114
115#
116# Fast dialup terminals, 2400/1200/300 rotary (can start either way)
117#
118D2400|d2400|Fast-Dial-2400:\
119 :nx=D1200:tc=2400-baud:
1203|D1200|Fast-Dial-1200:\
121 :nx=D300:tc=1200-baud:
1225|D300|Fast-Dial-300:\
123 :nx=D2400:tc=300-baud:
124
125#
126#telebit (19200)
127#
128t19200:\
129 :nx=t2400:tc=19200-baud:
130t2400:\
131 :nx=t1200:tc=2400-baud:
132t1200:\
133 :nx=t19200:tc=1200-baud:
134
135#
136#telebit (9600)
137#
138t9600:\
139 :nx=t2400a:tc=9600-baud:
140t2400a:\
141 :nx=t1200a:tc=2400-baud:
142t1200a:\
143 :nx=t9600:tc=1200-baud:
144
145#
146# Odd special case terminals
147#
148-|tty33|asr33|Pity the poor user of this beast:\
149 :tc=110-baud:
150
1514|Console|Console Decwriter II:\
152 :nd@:cd@:rw:tc=300-baud:
153
154e|Console-1200|Console Decwriter III:\
155 :fd@:nd@:cd@:rw:tc=1200-baud:
156
157i|Interdata console:\
158 :uc:sp#0:
159
160l|lsi chess terminal:\
161 :sp#300:
162
163X|Xwindow|X window system:\
164 :fd@:nd@:cd@:rw:sp#9600:
165
166P|Pc|Pc console:\
45f7d17f 167 :ht:np:sp#9600:
984263bc
MD
168
169#
45f7d17f 170# Weirdo special case for fast crt's with hardcopy devices
984263bc
MD
171#
1728|T9600|CRT with hardcopy:\
173 :nx=T300:tc=9600-baud:
1749|T300|CRT with hardcopy (300):\
175 :nx=T9600:tc=300-baud:
176
177#
178# Plugboard, and misc other terminals
179#
180plug-9600|Plugboard-9600:\
181 :pf#1:tc=9600-baud:
182p|P9600|Plugboard-9600-rotary:\
183 :pf#1:nx=P300:tc=9600-baud:
184q|P300|Plugboard-300:\
185 :pf#1:nx=P1200:tc=300-baud:
186r|P1200|Plugboard-1200:\
187 :pf#1:nx=P9600:tc=1200-baud:
188
189#
190# XXXX Port selector
191#
192s|DSW|Port Selector:\
193 :ps:sp#2400:
194
195#
196# Auto-baud speed detect entry for Micom 600.
197# Special code in getty will switch this out
198# to one of the NNN-baud entries.
199#
200A|Auto-baud:\
201 :ab:sp#2400:f0#040:
202
203#
204# autologin - automatically log in as root
205#
206
207autologin|al.9600:\
208 :al=root:tc=std.9600:
5aec2a58
SW
209al.19200:\
210 :al=root:tc=std.19200:
211al.38400:\
212 :al=root:tc=std.38400:
213al.57600:\
214 :al=root:tc=std.57600:
215al.115200:\
216 :al=root:tc=std.115200:
217al.230400:\
218 :al=root:tc=std.230400:
f95025e8
SW
219al.Pc:\
220 :al=root:tc=Pc
984263bc 221
5aec2a58 222#
984263bc
MD
223# Entries for 3-wire serial terminals. These don't supply carrier, so
224# clocal needs to be set, and crtscts needs to be unset.
225#
f9b56c4c
EA
2263wire:\
227 :np:nc:sp#0:
984263bc
MD
2283wire.9600|9600-3wire:\
229 :np:nc:sp#9600:
5aec2a58
SW
2303wire.19200|19200-3wire:\
231 :np:nc:sp#19200:
984263bc
MD
2323wire.38400|38400-3wire:\
233 :np:nc:sp#38400:
2343wire.57600|57600-3wire:\
235 :np:nc:sp#57600:
2363wire.115200|115200-3wire:\
237 :np:nc:sp#115200:
2383wire.230400|230400-3wire:\
239 :np:nc:sp#230400: