| | 1 | # $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ |
| | 2 | # $DragonFly: src/sys/conf/options,v 1.98 2008/11/17 11:55:19 swildner Exp $ |
| | 3 | # |
| | 4 | # On the handling of kernel options |
| | 5 | # |
| | 6 | # All kernel options should be listed in LINT, with suitable |
| | 7 | # descriptions. Negative options (options that make some code not |
| | 8 | # compile) should be commented out; LINT should compile as much code |
| | 9 | # as possible. Try to structure option-using code so that a single |
| | 10 | # option only switch code on, or only switch code off, to make it |
| | 11 | # possible to have a full compile-test. If necessary, you can include |
| | 12 | # "opt_lint.h" and check for COMPILING_LINT to get maximum code |
| | 13 | # coverage. |
| | 14 | # |
| | 15 | # All new options shall also be listed in either "conf/options" or |
| | 16 | # "platform/<platform>/conf/options". Options that affect a single |
| | 17 | # source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while |
| | 18 | # options that affect multiple files should either go in |
| | 19 | # "opt_global.h" if this is a kernel-wide option (used just about |
| | 20 | # everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect |
| | 21 | # only some files. Note that the effect of listing only an option |
| | 22 | # without a header-file-name in conf/options (and cousins) is that the |
| | 23 | # last convention is followed. |
| | 24 | # |
| | 25 | # This handling scheme is not yet fully implemented. |
| | 26 | # |
| | 27 | # |
| | 28 | # Format of this file: |
| | 29 | # Option name filename |
| | 30 | # |
| | 31 | # If filename is missing, the default is |
| | 32 | # opt_<name-of-option-in-lower-case>.h |
| | 33 | |
| | 34 | # Adaptec Array Controller driver options |
| | 35 | AAC_DEBUG opt_aac.h # Debugging levels: |
| | 36 | # 0 - quiet, only emit warnings |
| | 37 | # 1 - noisy, emit major function |
| | 38 | # points and things done |
| | 39 | # 2 - noisier, emit trace items |
| | 40 | # in loops, etc. |
| | 41 | # 3 - even more noisy, more function |
| | 42 | # points |
| | 43 | # 4 - noisiest |
| | 44 | |
| | 45 | # Adaptec aic7xxx SCSI controller options |
| | 46 | AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory |
| | 47 | # mapped I/O |
| | 48 | |
| | 49 | AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable |
| | 50 | # targetmode operations. |
| | 51 | |
| | 52 | AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our |
| | 53 | # configuration prom. |
| | 54 | |
| | 55 | AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. |
| | 56 | |
| | 57 | AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. |
| | 58 | # See sys/dev/aic7xxx/aic7xxx.h |
| | 59 | |
| | 60 | AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug |
| | 61 | # output. Adds ~15k to driver. |
| | 62 | |
| | 63 | # Adaptec aic79xx SCSI controller options |
| | 64 | AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. |
| | 65 | |
| | 66 | AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. |
| | 67 | # See sys/dev/aic7xxx/aic79xx.h |
| | 68 | |
| | 69 | AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable |
| | 70 | # targetmode operations. |
| | 71 | |
| | 72 | AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug |
| | 73 | # output. Adds ~15k to driver. |
| | 74 | |
| | 75 | ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory |
| | 76 | # mapped I/O |
| | 77 | TWA_DEBUG opt_twa.h |
| | 78 | TWA_FLASH_FIRMWARE opt_twa.h |
| | 79 | |
| | 80 | #options for ACPI support |
| | 81 | ACPI_DEBUG opt_acpi.h |
| | 82 | ACPI_NO_SEMAPHORES opt_acpi.h |
| | 83 | ACPI_ENABLE_PCI opt_acpi.h |
| | 84 | |
| | 85 | # Miscellaneous options. |
| | 86 | COMPAT_DF12 opt_compatdf12.h |
| | 87 | COMPAT_43 opt_compat.h |
| | 88 | COMPAT_SUNOS opt_compat.h |
| | 89 | COMPILING_LINT opt_lint.h |
| | 90 | CY_PCI_FASTINTR |
| | 91 | DDB |
| | 92 | DDB_TRACE |
| | 93 | DDB_UNATTENDED opt_ddb.h |
| | 94 | GDB_REMOTE_CHAT opt_ddb.h |
| | 95 | HW_WDOG |
| | 96 | KTRACE |
| | 97 | LIBICONV |
| | 98 | MD_NSECT opt_md.h |
| | 99 | MD_ROOT opt_md.h |
| | 100 | MD_ROOT_SIZE opt_md.h |
| | 101 | NSWAPDEV opt_swap.h |
| | 102 | NSWBUF_MIN opt_swap.h |
| | 103 | PPS_SYNC opt_ntp.h |
| | 104 | QUOTA |
| | 105 | SUIDDIR opt_suiddir.h |
| | 106 | SYSVMSG opt_sysvipc.h |
| | 107 | SYSVSEM opt_sysvipc.h |
| | 108 | SYSVSHM opt_sysvipc.h |
| | 109 | SHMALL opt_sysvipc.h |
| | 110 | SHMMAX opt_sysvipc.h |
| | 111 | SHMMAXPGS opt_sysvipc.h |
| | 112 | SHMMIN opt_sysvipc.h |
| | 113 | SHMMNI opt_sysvipc.h |
| | 114 | SHMSEG opt_sysvipc.h |
| | 115 | SEMMAP opt_sysvipc.h |
| | 116 | SEMMNI opt_sysvipc.h |
| | 117 | SEMMNS opt_sysvipc.h |
| | 118 | SEMMNU opt_sysvipc.h |
| | 119 | SEMMSL opt_sysvipc.h |
| | 120 | SEMOPM opt_sysvipc.h |
| | 121 | SEMUME opt_sysvipc.h |
| | 122 | MSGMNB opt_sysvipc.h |
| | 123 | MSGMNI opt_sysvipc.h |
| | 124 | MSGSEG opt_sysvipc.h |
| | 125 | MSGSSZ opt_sysvipc.h |
| | 126 | MSGTQL opt_sysvipc.h |
| | 127 | UCONSOLE |
| | 128 | ICMP_BANDLIM |
| | 129 | VFS_AIO |
| | 130 | DIRECTIO opt_directio.h |
| | 131 | |
| | 132 | # POSIX kernel options |
| | 133 | P1003_1B opt_posix.h |
| | 134 | _KPOSIX_PRIORITY_SCHEDULING opt_posix.h |
| | 135 | _KPOSIX_VERSION opt_posix.h |
| | 136 | |
| | 137 | # Do we want the config file compiled into the kernel? |
| | 138 | INCLUDE_CONFIG_FILE opt_config.h |
| | 139 | |
| | 140 | # Options for static file systems. These should only be used at config |
| | 141 | # time, since the corresponding lkms cannot work if there are any static |
| | 142 | # dependencies. Unusability is enforced by hiding the defines for the |
| | 143 | # options in a never-included header. |
| | 144 | EXT2FS opt_dontuse.h |
| | 145 | FDESC opt_dontuse.h |
| | 146 | MFS opt_dontuse.h |
| | 147 | MSDOSFS opt_dontuse.h |
| | 148 | NULLFS opt_dontuse.h |
| | 149 | PORTAL opt_dontuse.h |
| | 150 | PROCFS opt_dontuse.h |
| | 151 | UDF opt_dontuse.h |
| | 152 | NTFS opt_dontuse.h |
| | 153 | |
| | 154 | # These static filesystems has one slightly bogus static dependency in |
| | 155 | # sys/platform/.../i386/autoconf.c. If any of these filesystems are |
| | 156 | # statically compiled into the kernel, code for mounting them as root |
| | 157 | # filesystems will be enabled - but look below. Boot-code is purposely |
| | 158 | # unavailable for the LKM-based versions. |
| | 159 | CD9660 |
| | 160 | FFS |
| | 161 | NFS |
| | 162 | NWFS |
| | 163 | USERFS |
| | 164 | HAMMER |
| | 165 | |
| | 166 | # If you are following the conditions in the copyright, |
| | 167 | # you can enable soft-updates which will speed up a lot of things |
| | 168 | # and make the system safer from crashes at the same time. |
| | 169 | # otherwise a STUB module will be compiled in. |
| | 170 | SOFTUPDATES opt_ffs.h |
| | 171 | |
| | 172 | # Enable fast hash lookups for large directories on UFS-based filesystems. |
| | 173 | UFS_DIRHASH opt_ufs.h |
| | 174 | |
| | 175 | # The above static dependencies are planned removed, with a |
| | 176 | # <filesystem>_ROOT option to control if it usable as root. This list |
| | 177 | # allows these options to be present in config files already (though |
| | 178 | # they won't make any difference yet). |
| | 179 | FFS_ROOT opt_ffs.h |
| | 180 | NFS_ROOT opt_nfsroot.h |
| | 181 | |
| | 182 | # The union static file system has bogus static dependencies, so it isn't |
| | 183 | # hidden yet. |
| | 184 | UNION |
| | 185 | |
| | 186 | # Options used only in subr_param.c. |
| | 187 | HZ opt_param.h |
| | 188 | MAXFILES opt_param.h |
| | 189 | NBUF opt_param.h |
| | 190 | NMBCLUSTERS opt_param.h |
| | 191 | NMBUFS opt_param.h |
| | 192 | NSFBUFS opt_param.h |
| | 193 | VM_BCACHE_SIZE_MAX opt_param.h |
| | 194 | VM_SWZONE_SIZE_MAX opt_param.h |
| | 195 | MAXUSERS |
| | 196 | DFLDSIZ opt_param.h |
| | 197 | MAXDSIZ opt_param.h |
| | 198 | MAXSSIZ opt_param.h |
| | 199 | |
| | 200 | # Generic SCSI options. |
| | 201 | CAM_MAX_HIGHPOWER opt_cam.h |
| | 202 | CAMDEBUG opt_cam.h |
| | 203 | CAM_DEBUG_DELAY opt_cam.h |
| | 204 | CAM_DEBUG_BUS opt_cam.h |
| | 205 | CAM_DEBUG_TARGET opt_cam.h |
| | 206 | CAM_DEBUG_LUN opt_cam.h |
| | 207 | CAM_DEBUG_FLAGS opt_cam.h |
| | 208 | SCSI_DELAY opt_scsi.h |
| | 209 | SCSI_NO_SENSE_STRINGS opt_scsi.h |
| | 210 | SCSI_NO_OP_STRINGS opt_scsi.h |
| | 211 | |
| | 212 | # iSCSI options |
| | 213 | ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h |
| | 214 | |
| | 215 | # Options used only in cam/scsi/scsi_cd.c |
| | 216 | CHANGER_MIN_BUSY_SECONDS opt_cd.h |
| | 217 | CHANGER_MAX_BUSY_SECONDS opt_cd.h |
| | 218 | |
| | 219 | # Options used only in cam/scsi/scsi_sa.c. |
| | 220 | SA_IO_TIMEOUT opt_sa.h |
| | 221 | SA_SPACE_TIMEOUT opt_sa.h |
| | 222 | SA_REWIND_TIMEOUT opt_sa.h |
| | 223 | SA_ERASE_TIMEOUT opt_sa.h |
| | 224 | SA_1FM_AT_EOD opt_sa.h |
| | 225 | |
| | 226 | # Options used only in cam/scsi/scsi_pt.c |
| | 227 | SCSI_PT_DEFAULT_TIMEOUT opt_pt.h |
| | 228 | |
| | 229 | # Options used only in cam/scsi/scsi_ses.c |
| | 230 | SES_ENABLE_PASSTHROUGH opt_ses.h |
| | 231 | |
| | 232 | # Options used in dev/sym/ (Symbios SCSI driver). |
| | 233 | SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) |
| | 234 | # Allows the ncr to take precedence |
| | 235 | # 1 (1<<0) -> 810a, 860 |
| | 236 | # 2 (1<<1) -> 825a, 875, 885, 895 |
| | 237 | # 4 (1<<2) -> 895a, 896, 1510d |
| | 238 | SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 |
| | 239 | # disabled:0 (default), enabled:1 |
| | 240 | SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking |
| | 241 | # disabled:0, enabled:1 (default) |
| | 242 | SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported |
| | 243 | # default:8, range:[1..64] |
| | 244 | |
| | 245 | # Options used only in pci/ncr.c |
| | 246 | SCSI_NCR_DEBUG opt_ncr.h |
| | 247 | SCSI_NCR_MAX_SYNC opt_ncr.h |
| | 248 | SCSI_NCR_MAX_WIDE opt_ncr.h |
| | 249 | SCSI_NCR_MYADDR opt_ncr.h |
| | 250 | |
| | 251 | # Options used only in pci/isp_pci.c |
| | 252 | ISP_TARGET_MODE opt_isp.h |
| | 253 | |
| | 254 | # Options used in the 'ata' ATA/ATAPI driver |
| | 255 | ATA_STATIC_ID opt_ata.h |
| | 256 | |
| | 257 | # Net stuff. |
| | 258 | # altq stuff |
| | 259 | ALTQ opt_global.h |
| | 260 | ALTQ_CBQ opt_altq.h |
| | 261 | ALTQ_RED opt_altq.h |
| | 262 | ALTQ_RIO opt_altq.h |
| | 263 | ALTQ_HFSC opt_altq.h |
| | 264 | ALTQ_PRIQ opt_altq.h |
| | 265 | ALTQ_FAIRQ opt_altq.h |
| | 266 | ALTQ_NOPCC opt_altq.h |
| | 267 | ALTQ_DEBUG opt_altq.h |
| | 268 | |
| | 269 | ACCEPT_FILTER_DATA |
| | 270 | ACCEPT_FILTER_HTTP |
| | 271 | BOOTP opt_bootp.h |
| | 272 | BOOTP_COMPAT opt_bootp.h |
| | 273 | BOOTP_NFSROOT opt_bootp.h |
| | 274 | BOOTP_NFSV3 opt_bootp.h |
| | 275 | BOOTP_WIRED_TO opt_bootp.h |
| | 276 | CARP opt_carp.h |
| | 277 | ETHER_II opt_ef.h |
| | 278 | ETHER_8023 opt_ef.h |
| | 279 | ETHER_8022 opt_ef.h |
| | 280 | ETHER_SNAP opt_ef.h |
| | 281 | MROUTING opt_mrouting.h |
| | 282 | PIM opt_mrouting.h |
| | 283 | INET opt_inet.h |
| | 284 | INET6 opt_inet6.h |
| | 285 | IPSEC opt_ipsec.h |
| | 286 | IPSEC_ESP opt_ipsec.h |
| | 287 | IPSEC_DEBUG opt_ipsec.h |
| | 288 | IPSEC_FILTERGIF opt_ipsec.h |
| | 289 | FAST_IPSEC opt_ipsec.h |
| | 290 | IPDIVERT |
| | 291 | DUMMYNET opt_ipdn.h |
| | 292 | DUMMYNET_DEBUG opt_ipdn.h |
| | 293 | IPFILTER opt_ipfilter.h |
| | 294 | IPFILTER_LOG opt_ipfilter.h |
| | 295 | IPFILTER_DEFAULT_BLOCK opt_ipfilter.h |
| | 296 | IPFIREWALL opt_ipfw.h |
| | 297 | IPFIREWALL_DEBUG opt_ipfw.h |
| | 298 | IPFIREWALL_VERBOSE opt_ipfw.h |
| | 299 | IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h |
| | 300 | IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h |
| | 301 | IPFIREWALL_FORWARD opt_ipfw.h |
| | 302 | IPV6FIREWALL opt_ip6fw.h |
| | 303 | IPV6FIREWALL_VERBOSE opt_ip6fw.h |
| | 304 | IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h |
| | 305 | IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h |
| | 306 | IPSTEALTH |
| | 307 | IPX opt_ipx.h |
| | 308 | IPXIP opt_ipx.h |
| | 309 | IPTUNNEL opt_ipx.h |
| | 310 | LIBMCHAIN |
| | 311 | MPLS opt_mpls.h |
| | 312 | NCP opt_ncp.h |
| | 313 | NETATALK opt_atalk.h |
| | 314 | NS opt_ns.h |
| | 315 | PPP_BSDCOMP opt_ppp.h |
| | 316 | PPP_DEFLATE opt_ppp.h |
| | 317 | PPP_FILTER opt_ppp.h |
| | 318 | SLIP_IFF_OPTS opt_slip.h |
| | 319 | TCPDEBUG |
| | 320 | TCP_DROP_SYNFIN opt_tcp_input.h |
| | 321 | |
| | 322 | XBONEHACK |
| | 323 | MBUF_STRESS_TEST opt_mbuf_stress_test.h |
| | 324 | |
| | 325 | # (New netgraph, port still in progress) |
| | 326 | # |
| | 327 | # Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. |
| | 328 | # Each netgraph node type can be either be compiled into the kernel |
| | 329 | # or loaded dynamically. To get the former, include the corresponding |
| | 330 | # option below. Each type has its own man page, e.g. ng_async(4). |
| | 331 | NETGRAPH7 |
| | 332 | NETGRAPH7_DEBUG opt_netgraph.h |
| | 333 | NETGRAPH7_ASYNC opt_netgraph.h |
| | 334 | NETGRAPH7_ATMLLC opt_netgraph.h |
| | 335 | NETGRAPH7_ATM_ATMPIF opt_netgraph.h |
| | 336 | NETGRAPH7_BLUETOOTH opt_netgraph.h |
| | 337 | NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h |
| | 338 | NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h |
| | 339 | NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h |
| | 340 | NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h |
| | 341 | NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h |
| | 342 | NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h |
| | 343 | NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h |
| | 344 | NETGRAPH7_BPF opt_netgraph.h |
| | 345 | NETGRAPH7_BRIDGE opt_netgraph.h |
| | 346 | NETGRAPH7_CAR opt_netgraph.h |
| | 347 | NETGRAPH7_CISCO opt_netgraph.h |
| | 348 | NETGRAPH7_DEFLATE opt_netgraph.h |
| | 349 | NETGRAPH7_DEVICE opt_netgraph.h |
| | 350 | NETGRAPH7_ECHO opt_netgraph.h |
| | 351 | NETGRAPH7_EIFACE opt_netgraph.h |
| | 352 | NETGRAPH7_ETHER opt_netgraph.h |
| | 353 | NETGRAPH7_FEC opt_netgraph.h |
| | 354 | NETGRAPH7_FRAME_RELAY opt_netgraph.h |
| | 355 | NETGRAPH7_GIF opt_netgraph.h |
| | 356 | NETGRAPH7_GIF_DEMUX opt_netgraph.h |
| | 357 | NETGRAPH7_HOLE opt_netgraph.h |
| | 358 | NETGRAPH7_IFACE opt_netgraph.h |
| | 359 | NETGRAPH7_IP_INPUT opt_netgraph.h |
| | 360 | NETGRAPH7_IPFW opt_netgraph.h |
| | 361 | NETGRAPH7_KSOCKET opt_netgraph.h |
| | 362 | NETGRAPH7_L2TP opt_netgraph.h |
| | 363 | NETGRAPH7_LMI opt_netgraph.h |
| | 364 | # MPPC compression requires proprietary files (not included) |
| | 365 | NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h |
| | 366 | NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h |
| | 367 | NETGRAPH7_NAT opt_netgraph.h |
| | 368 | NETGRAPH7_NETFLOW opt_netgraph.h |
| | 369 | NETGRAPH7_ONE2MANY opt_netgraph.h |
| | 370 | NETGRAPH7_PPP opt_netgraph.h |
| | 371 | NETGRAPH7_PPPOE opt_netgraph.h |
| | 372 | NETGRAPH7_PPTPGRE opt_netgraph.h |
| | 373 | NETGRAPH7_PRED1 opt_netgraph.h |
| | 374 | NETGRAPH7_RFC1490 opt_netgraph.h |
| | 375 | NETGRAPH7_SOCKET opt_netgraph.h |
| | 376 | NETGRAPH7_SPLIT opt_netgraph.h |
| | 377 | NETGRAPH7_SPPP opt_netgraph.h |
| | 378 | NETGRAPH7_TAG opt_netgraph.h |
| | 379 | NETGRAPH7_TCPMSS opt_netgraph.h |
| | 380 | NETGRAPH7_TEE opt_netgraph.h |
| | 381 | NETGRAPH7_TTY opt_netgraph.h |
| | 382 | NETGRAPH7_UI opt_netgraph.h |
| | 383 | NETGRAPH7_VJC opt_netgraph.h |
| | 384 | |
| | 385 | # NgATM options |
| | 386 | NGATM7_ATM opt_netgraph.h |
| | 387 | NGATM7_ATMBASE opt_netgraph.h |
| | 388 | NGATM7_SSCOP opt_netgraph.h |
| | 389 | NGATM7_SSCFU opt_netgraph.h |
| | 390 | NGATM7_UNI opt_netgraph.h |
| | 391 | NGATM7_CCATM opt_netgraph.h |
| | 392 | |
| | 393 | # Netgraph(4). Use option NETGRAPH to enable the base netgraph code. |
| | 394 | # Each netgraph node type can be either be compiled into the kernel |
| | 395 | # or loaded dynamically. To get the former, include the corresponding |
| | 396 | # option below. Each type has its own man page, e.g. ng_async(8). |
| | 397 | NETGRAPH |
| | 398 | NETGRAPH_ASYNC opt_netgraph.h |
| | 399 | NETGRAPH_BPF opt_netgraph.h |
| | 400 | NETGRAPH_BRIDGE opt_netgraph.h |
| | 401 | NETGRAPH_CISCO opt_netgraph.h |
| | 402 | NETGRAPH_ECHO opt_netgraph.h |
| | 403 | NETGRAPH_EIFACE opt_netgraph.h |
| | 404 | NETGRAPH_ETHER opt_netgraph.h |
| | 405 | NETGRAPH_FRAME_RELAY opt_netgraph.h |
| | 406 | NETGRAPH_HOLE opt_netgraph.h |
| | 407 | NETGRAPH_IFACE opt_netgraph.h |
| | 408 | NETGRAPH_KSOCKET opt_netgraph.h |
| | 409 | NETGRAPH_LMI opt_netgraph.h |
| | 410 | NETGRAPH_L2TP opt_netgraph.h |
| | 411 | # MPPC compression requires proprietary files (not included) |
| | 412 | NETGRAPH_MPPC_COMPRESSION opt_netgraph.h |
| | 413 | NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h |
| | 414 | NETGRAPH_ONE2MANY opt_netgraph.h |
| | 415 | NETGRAPH_PPP opt_netgraph.h |
| | 416 | NETGRAPH_PPPOE opt_netgraph.h |
| | 417 | NETGRAPH_PPTPGRE opt_netgraph.h |
| | 418 | NETGRAPH_RFC1490 opt_netgraph.h |
| | 419 | NETGRAPH_SOCKET opt_netgraph.h |
| | 420 | NETGRAPH_TEE opt_netgraph.h |
| | 421 | NETGRAPH_TTY opt_netgraph.h |
| | 422 | NETGRAPH_UI opt_netgraph.h |
| | 423 | NETGRAPH_VJC opt_netgraph.h |
| | 424 | |
| | 425 | # DRM options |
| | 426 | DRM_DEBUG opt_drm.h |
| | 427 | DRM_LINUX opt_drm.h |
| | 428 | |
| | 429 | # ATM (HARP version) |
| | 430 | ATM_CORE opt_atm.h |
| | 431 | ATM_IP opt_atm.h |
| | 432 | ATM_SIGPVC opt_atm.h |
| | 433 | ATM_SPANS opt_atm.h |
| | 434 | ATM_UNI opt_atm.h |
| | 435 | |
| | 436 | # XXX Conflict: # of devices vs network protocol (Native ATM). |
| | 437 | # This makes "atm.h" unusable. |
| | 438 | NATM opt_natm.h |
| | 439 | |
| | 440 | # DPT driver debug flags |
| | 441 | DPT_MEASURE_PERFORMANCE opt_dpt.h |
| | 442 | DPT_HANDLE_TIMEOUTS opt_dpt.h |
| | 443 | DPT_TIMEOUT_FACTOR opt_dpt.h |
| | 444 | DPT_LOST_IRQ opt_dpt.h |
| | 445 | DPT_RESET_HBA opt_dpt.h |
| | 446 | |
| | 447 | # Misc debug flags. Most of these should probably be replaced with |
| | 448 | # 'DEBUG', and then let people recompile just the interesting modules |
| | 449 | # with 'make CC="cc -DDEBUG"'. |
| | 450 | CLUSTERDEBUG opt_debug_cluster.h |
| | 451 | DEBUG_1284 opt_ppb_1284.h |
| | 452 | VP0_DEBUG opt_vpo.h |
| | 453 | LPT_DEBUG opt_lpt.h |
| | 454 | PLIP_DEBUG opt_plip.h |
| | 455 | LOCKF_DEBUG opt_debug_lockf.h |
| | 456 | LOUTB opt_debug_outb.h |
| | 457 | NPX_DEBUG opt_debug_npx.h |
| | 458 | NETATALKDEBUG opt_atalk.h |
| | 459 | SI_DEBUG opt_debug_si.h |
| | 460 | |
| | 461 | # Fb options |
| | 462 | FB_DEBUG opt_fb.h |
| | 463 | FB_INSTALL_CDEV opt_fb.h |
| | 464 | |
| | 465 | # ppbus related options |
| | 466 | PERIPH_1284 opt_ppb_1284.h |
| | 467 | DONTPROBE_1284 opt_ppb_1284.h |
| | 468 | |
| | 469 | # smbus related options |
| | 470 | ENABLE_ALART opt_intpm.h |
| | 471 | |
| | 472 | # These cause changes all over the kernel |
| | 473 | BLKDEV_IOSIZE opt_global.h |
| | 474 | DEBUG opt_global.h |
| | 475 | DEBUG_LOCKS opt_global.h |
| | 476 | DEBUG_CRIT_SECTIONS opt_global.h |
| | 477 | DIAGNOSTIC opt_global.h |
| | 478 | INVARIANTS opt_global.h |
| | 479 | SIMPLELOCK_DEBUG opt_global.h |
| | 480 | VFS_BIO_DEBUG opt_global.h |
| | 481 | DEBUG_INTERRUPTS opt_global.h |
| | 482 | SOCKBUF_DEBUG opt_global.h |
| | 483 | PANIC_DEBUG opt_global.h |
| | 484 | MBUF_DEBUG opt_global.h |
| | 485 | |
| | 486 | # Sample system/interrupt PC |
| | 487 | DEBUG_PCTRACK opt_pctrack.h |
| | 488 | |
| | 489 | # These are VM related options |
| | 490 | NO_SWAPPING opt_vm.h |
| | 491 | PQ_CACHESIZE opt_vmpage.h |
| | 492 | |
| | 493 | # Standard SMP options |
| | 494 | SMP opt_global.h |
| | 495 | |
| | 496 | # sys/netkey |
| | 497 | KEY |
| | 498 | |
| | 499 | # Size of the kernel message buffer |
| | 500 | MSGBUF_SIZE opt_msgbuf.h |
| | 501 | |
| | 502 | # PCI related options |
| | 503 | COMPAT_OLDPCI |
| | 504 | |
| | 505 | # NFS options |
| | 506 | NFS_MINATTRTIMO opt_nfs.h |
| | 507 | NFS_MAXATTRTIMO opt_nfs.h |
| | 508 | NFS_MINDIRATTRTIMO opt_nfs.h |
| | 509 | NFS_MAXDIRATTRTIMO opt_nfs.h |
| | 510 | NFS_GATHERDELAY opt_nfs.h |
| | 511 | NFS_UIDHASHSIZ opt_nfs.h |
| | 512 | NFS_WDELAYHASHSIZ opt_nfs.h |
| | 513 | NFS_MUIDHASHSIZ opt_nfs.h |
| | 514 | NFS_NOSERVER opt_nfs.h |
| | 515 | NFS_DEBUG opt_nfs.h |
| | 516 | |
| | 517 | # MSDOSFS options |
| | 518 | MSDOSFS_DEBUG opt_msdosfs.h |
| | 519 | |
| | 520 | # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver |
| | 521 | BROOKTREE_SYSTEM_DEFAULT opt_bktr.h |
| | 522 | BROOKTREE_ALLOC_PAGES opt_bktr.h |
| | 523 | BKTR_OVERRIDE_CARD opt_bktr.h |
| | 524 | BKTR_OVERRIDE_TUNER opt_bktr.h |
| | 525 | BKTR_OVERRIDE_DBX opt_bktr.h |
| | 526 | BKTR_OVERRIDE_MSP opt_bktr.h |
| | 527 | BKTR_SYSTEM_DEFAULT opt_bktr.h |
| | 528 | BKTR_ALLOC_PAGES opt_bktr.h |
| | 529 | BKTR_USE_PLL opt_bktr.h |
| | 530 | BKTR_GPIO_ACCESS opt_bktr.h |
| | 531 | BKTR_NO_MSP_RESET opt_bktr.h |
| | 532 | BKTR_430_FX_MODE opt_bktr.h |
| | 533 | BKTR_SIS_VIA_MODE opt_bktr.h |
| | 534 | BKTR_NEW_MSP34XX_DRIVER opt_bktr.h |
| | 535 | |
| | 536 | # meteor opt_meteor.h |
| | 537 | METEOR_ALLOC_PAGES opt_meteor.h |
| | 538 | METEOR_TEST_VIDEO opt_meteor.h |
| | 539 | METEOR_SYSTEM_DEFAULT opt_meteor.h |
| | 540 | METEOR_DEALLOC_PAGES opt_meteor.h |
| | 541 | METEOR_DEALLOC_ABOVE opt_meteor.h |
| | 542 | |
| | 543 | # Various mi ISA bus flags |
| | 544 | COMPAT_OLDISA opt_compat_oldisa.h |
| | 545 | COM_ESP opt_sio.h |
| | 546 | COM_MULTIPORT opt_sio.h |
| | 547 | BREAK_TO_DEBUGGER opt_comconsole.h |
| | 548 | ALT_BREAK_TO_DEBUGGER opt_comconsole.h |
| | 549 | |
| | 550 | # options for bus/device framework |
| | 551 | BUS_DEBUG opt_bus.h |
| | 552 | |
| | 553 | # options for USB support |
| | 554 | OHCI_DEBUG opt_usb.h |
| | 555 | USB_DEBUG opt_usb.h |
| | 556 | |
| | 557 | # Vinum options |
| | 558 | VINUMDEBUG opt_vinum.h |
| | 559 | |
| | 560 | # Embedded system options |
| | 561 | UKBD_DFLT_KEYMAP opt_ukbd.h |
| | 562 | INIT_PATH opt_init_path.h |
| | 563 | |
| | 564 | ROOTDEVNAME opt_rootdevname.h |
| | 565 | |
| | 566 | FDC_DEBUG opt_fdc.h |
| | 567 | PCFCLOCK_VERBOSE opt_pcfclock.h |
| | 568 | PCFCLOCK_MAX_RETRIES opt_pcfclock.h |
| | 569 | |
| | 570 | # Polling device handling |
| | 571 | DEVICE_POLLING opt_polling.h |
| | 572 | |
| | 573 | # Network device queue based polling |
| | 574 | IFPOLL_ENABLE opt_ifpoll.h |
| | 575 | |
| | 576 | # options for ubsec driver |
| | 577 | UBSEC_DEBUG opt_ubsec.h |
| | 578 | UBSEC_RNDTEST opt_ubsec.h |
| | 579 | UBSEC_NO_RNG opt_ubsec.h |
| | 580 | |
| | 581 | # options for hifn driver |
| | 582 | HIFN_DEBUG opt_hifn.h |
| | 583 | HIFN_RNDTEST opt_hifn.h |
| | 584 | HIFN_NO_RNG opt_hifn.h |
| | 585 | |
| | 586 | # KTR options |
| | 587 | KTR opt_global.h |
| | 588 | KTR_ALL opt_ktr.h |
| | 589 | KTR_TOKENS opt_ktr.h |
| | 590 | KTR_MEMORY opt_ktr.h |
| | 591 | KTR_USB_MEMORY opt_ktr.h |
| | 592 | KTR_IPIQ opt_ktr.h |
| | 593 | KTR_MSGPORT opt_ktr.h |
| | 594 | KTR_ENTRIES opt_global.h |
| | 595 | KTR_VERBOSE opt_ktr.h |
| | 596 | KTR_GIANT_CONTENTION opt_ktr.h |
| | 597 | KTR_SPIN_CONTENTION opt_ktr.h |
| | 598 | KTR_IF_BGE opt_ktr.h |
| | 599 | KTR_IF_EM opt_ktr.h |
| | 600 | KTR_IF_EMX opt_ktr.h |
| | 601 | KTR_KERNENTRY opt_ktr.h |
| | 602 | KTR_TESTLOG opt_ktr.h |
| | 603 | KTR_SERIALIZER opt_ktr.h |
| | 604 | KTR_POLLING opt_ktr.h |
| | 605 | KTR_IFQ opt_ktr.h |
| | 606 | KTR_IF_START opt_ktr.h |
| | 607 | KTR_HAMMER opt_ktr.h |
| | 608 | KTR_ETHERNET opt_ktr.h |
| | 609 | KTR_CTXSW opt_ktr.h |
| | 610 | |
| | 611 | # options for the Atheros driver |
| | 612 | ATH_DEBUG opt_ath.h |
| | 613 | ATH_DIAGAPI opt_ath.h |
| | 614 | ATH_RXBUF opt_ath.h |
| | 615 | ATH_TXBUF opt_ath.h |
| | 616 | |
| | 617 | # ...and its HAL |
| | 618 | AH_SUPPORT_AR5416 opt_ah.h |
| | 619 | |
| | 620 | # bce driver |
| | 621 | BCE_DEBUG opt_bce.h |
| | 622 | BCE_NVRAM_WRITE_SUPPORT opt_bce.h |
| | 623 | |
| | 624 | # ed driver |
| | 625 | ED_NO_MIIBUS opt_ed.h |
| | 626 | |
| | 627 | # emx driver |
| | 628 | EMX_RSS_DEBUG opt_emx.h |
| | 629 | |
| | 630 | # jme driver |
| | 631 | JME_RSS_DEBUG opt_jme.h |
| | 632 | |
| | 633 | # wi driver |
| | 634 | WI_SYMBOL_FIRMWARE opt_wi.h |
| | 635 | |
| | 636 | # dcons options |
| | 637 | DCONS_BUF_SIZE opt_dcons.h |
| | 638 | DCONS_POLL_HZ opt_dcons.h |
| | 639 | DCONS_FORCE_CONSOLE opt_dcons.h |
| | 640 | DCONS_FORCE_GDB opt_dcons.h |
| | 641 | |
| | 642 | # deprecated drivers and options |
| | 643 | I_WANT_DEPRECATED_STUFF opt_deprecated.h |
| | 644 | |
| | 645 | # SCTP |
| | 646 | SCTP opt_sctp.h |
| | 647 | SCTP_DEBUG opt_sctp.h |
| | 648 | SCTP_USE_ADLER32 opt_sctp.h |
| | 649 | SCTP_HIGH_SPEED opt_sctp.h |
| | 650 | SCTP_STAT_LOGGING opt_sctp.h |
| | 651 | SCTP_CWND_LOGGING opt_sctp.h |
| | 652 | SCTP_BLK_LOGGING opt_sctp.h |
| | 653 | SCTP_STR_LOGGING opt_sctp.h |
| | 654 | SCTP_FR_LOGGING opt_sctp.h |
| | 655 | SCTP_MAP_LOGGING opt_sctp.h |
| | 656 | |
| | 657 | # syslink kernel support |
| | 658 | # |
| | 659 | SYSLINK opt_syslink.h |
| | 660 | |
| | 661 | # Receive Side Scaling |
| | 662 | RSS opt_rss.h |
| | 663 | RSS_DEBUG opt_rss.h |
| | 664 | |
| | 665 | # Enable watchdogs |
| | 666 | WATCHDOG_ENABLE opt_cpu.h |
| | 667 | |
| | 668 | # Panic settings |
| | 669 | WDOG_DISABLE_ON_PANIC opt_panic.h |
| | 670 | ERROR_LED_ON_PANIC opt_panic.h |
projects / dragonfly.git / blame_incremental