Move tcpdump-3.9/ to tcpdump/. No need for a versioned dir.
[dragonfly.git] / contrib / tcpdump / sctpConstants.h
... / ...
CommitLineData
1/* @(#) $Header: /tcpdump/master/tcpdump/sctpConstants.h,v 1.4 2003/06/03 23:49:23 guy Exp $ (LBL) */
2
3/* SCTP reference Implementation Copyright (C) 1999 Cisco And Motorola
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 *
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 *
16 * 3. Neither the name of Cisco nor of Motorola may be used
17 * to endorse or promote products derived from this software without
18 * specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * SUCH DAMAGE.
31 *
32 * This file is part of the SCTP reference Implementation
33 *
34 *
35 * Please send any bug reports or fixes you make to one of the following email
36 * addresses:
37 *
38 * rstewar1@email.mot.com
39 * kmorneau@cisco.com
40 * qxie1@email.mot.com
41 *
42 * Any bugs reported given to us we will try to fix... any fixes shared will
43 * be incorperated into the next SCTP release.
44 */
45
46
47#ifndef __sctpConstants_h__
48#define __sctpConstants_h__
49
50
51 /* If you wish to use MD5 instead of SLA uncomment the line
52 * below. Why you would like to do this:
53 * a) There may be IPR on SHA-1, or so the FIP-180-1 page says,
54 * b) MD5 is 3 times faster (has coded here).
55 *
56 * The disadvantage is, it is thought that MD5 has been
57 * cracked... see RFC2104.
58 */
59/*#define USE_MD5 1*/
60
61/* the SCTP protocol signature
62 * this includes the version number
63 * encoded in the last 4 bits of the
64 * signature.
65 */
66#define PROTO_SIGNATURE_A 0x30000000
67
68#define SCTP_VERSION_NUMBER 0x3
69
70#define MAX_TSN 0xffffffff
71#define MAX_SEQ 0xffff
72
73/* option:
74 * If you comment out the following you will
75 * receive the old behavior of obeying cwnd for
76 * the fast retransmit algorithm. With this defined
77 * a FR happens right away with-out waiting for the
78 * flightsize to drop below the cwnd value (which
79 * is reduced by the FR to 1/2 the inflight packets).
80 */
81#define SCTP_IGNORE_CWND_ON_FR 1
82/* default max I can burst out after a fast retransmit */
83#define SCTP_DEF_MAX_BURST 4
84
85/* Packet transmit states in the sent
86 * field in the SCTP_transmitOnQueue struct
87 */
88#define SCTP_DATAGRAM_UNSENT 0
89#define SCTP_DATAGRAM_SENT 1
90#define SCTP_DATAGRAM_RESEND1 2 /* not used */
91#define SCTP_DATAGRAM_RESEND2 3 /* not used */
92#define SCTP_DATAGRAM_RESEND3 4 /* not used */
93#define SCTP_DATAGRAM_RESEND 5
94#define SCTP_DATAGRAM_ACKED 10010
95#define SCTP_DATAGRAM_INBOUND 10011
96#define SCTP_READY_TO_TRANSMIT 10012
97#define SCTP_DATAGRAM_MARKED 20010
98
99#define MAX_FSID 64 /* debug 5 ints used for cc dynamic tracking */
100
101/* The valid defines for all message
102 * types know to SCTP. 0 is reserved
103 */
104#define SCTP_MSGTYPE_MASK 0xff
105
106#define SCTP_DATA 0x00
107#define SCTP_INITIATION 0x01
108#define SCTP_INITIATION_ACK 0x02
109#define SCTP_SELECTIVE_ACK 0x03
110#define SCTP_HEARTBEAT_REQUEST 0x04
111#define SCTP_HEARTBEAT_ACK 0x05
112#define SCTP_ABORT_ASSOCIATION 0x06
113#define SCTP_SHUTDOWN 0x07
114#define SCTP_SHUTDOWN_ACK 0x08
115#define SCTP_OPERATION_ERR 0x09
116#define SCTP_COOKIE_ECHO 0x0a
117#define SCTP_COOKIE_ACK 0x0b
118#define SCTP_ECN_ECHO 0x0c
119#define SCTP_ECN_CWR 0x0d
120#define SCTP_SHUTDOWN_COMPLETE 0x0e
121#define SCTP_FORWARD_CUM_TSN 0xc0
122#define SCTP_RELIABLE_CNTL 0xc1
123#define SCTP_RELIABLE_CNTL_ACK 0xc2
124
125/* ABORT and SHUTDOWN COMPLETE FLAG */
126#define SCTP_HAD_NO_TCB 0x01
127
128/* Data Chuck Specific Flags */
129#define SCTP_DATA_FRAG_MASK 0x03
130#define SCTP_DATA_MIDDLE_FRAG 0x00
131#define SCTP_DATA_LAST_FRAG 0x01
132#define SCTP_DATA_FIRST_FRAG 0x02
133#define SCTP_DATA_NOT_FRAG 0x03
134#define SCTP_DATA_UNORDERED 0x04
135
136#define SCTP_CRC_ENABLE_BIT 0x01 /* lower bit of reserved */
137
138#define isSCTPControl(a) (a->chunkID != SCTP_DATA)
139#define isSCTPData(a) (a->chunkID == SCTP_DATA)
140
141/* sctp parameter types for init/init-ack */
142
143#define SCTP_IPV4_PARAM_TYPE 0x0005
144#define SCTP_IPV6_PARAM_TYPE 0x0006
145#define SCTP_RESPONDER_COOKIE 0x0007
146#define SCTP_UNRECOG_PARAM 0x0008
147#define SCTP_COOKIE_PRESERVE 0x0009
148#define SCTP_HOSTNAME_VIA_DNS 0x000b
149#define SCTP_RESTRICT_ADDR_TO 0x000c
150
151#define SCTP_ECN_I_CAN_DO_ECN 0x8000
152#define SCTP_OPERATION_SUCCEED 0x4001
153#define SCTP_ERROR_NOT_EXECUTED 0x4002
154
155#define SCTP_UNRELIABLE_STRM 0xc000
156#define SCTP_ADD_IP_ADDRESS 0xc001
157#define SCTP_DEL_IP_ADDRESS 0xc002
158#define SCTP_STRM_FLOW_LIMIT 0xc003
159#define SCTP_PARTIAL_CSUM 0xc004
160#define SCTP_ERROR_CAUSE_TLV 0xc005
161#define SCTP_MIT_STACK_NAME 0xc006
162#define SCTP_SETADDRESS_PRIMARY 0xc007
163
164/* bits for TOS field */
165#define SCTP_ECT_BIT 0x02
166#define SCTP_CE_BIT 0x01
167
168/* error codes */
169#define SCTP_OP_ERROR_NO_ERROR 0x0000
170#define SCTP_OP_ERROR_INV_STRM 0x0001
171#define SCTP_OP_ERROR_MISS_PARAM 0x0002
172#define SCTP_OP_ERROR_STALE_COOKIE 0x0003
173#define SCTP_OP_ERROR_NO_RESOURCE 0x0004
174#define SCTP_OP_ERROR_DNS_FAILED 0x0005
175#define SCTP_OP_ERROR_UNK_CHUNK 0x0006
176#define SCTP_OP_ERROR_INV_PARAM 0x0007
177#define SCTP_OP_ERROR_UNK_PARAM 0x0008
178#define SCTP_OP_ERROR_NO_USERD 0x0009
179#define SCTP_OP_ERROR_COOKIE_SHUT 0x000a
180#define SCTP_OP_ERROR_DELETE_LAST 0x000b
181#define SCTP_OP_ERROR_RESOURCE_SHORT 0x000c
182
183#define SCTP_MAX_ERROR_CAUSE 12
184
185/* empty error causes i.e. nothing but the cause
186 * are SCTP_OP_ERROR_NO_RESOURCE, SCTP_OP_ERROR_INV_PARAM,
187 * SCTP_OP_ERROR_COOKIE_SHUT.
188 */
189
190/* parameter for Heart Beat */
191#define HEART_BEAT_PARAM 0x0001
192
193
194
195/* send options for SCTP
196 */
197#define SCTP_ORDERED_DELIVERY 0x01
198#define SCTP_NON_ORDERED_DELIVERY 0x02
199#define SCTP_DO_CRC16 0x08
200#define SCTP_MY_ADDRESS_ONLY 0x10
201
202/* below turns off above */
203#define SCTP_FLEXIBLE_ADDRESS 0x20
204#define SCTP_NO_HEARTBEAT 0x40
205
206/* mask to get sticky */
207#define SCTP_STICKY_OPTIONS_MASK 0x0c
208
209/* MTU discovery flags */
210#define SCTP_DONT_FRAGMENT 0x0100
211#define SCTP_FRAGMENT_OK 0x0200
212
213
214/* SCTP state defines for internal state machine */
215#define SCTP_STATE_EMPTY 0x0000
216#define SCTP_STATE_INUSE 0x0001
217#define SCTP_STATE_COOKIE_WAIT 0x0002
218#define SCTP_STATE_COOKIE_SENT 0x0004
219#define SCTP_STATE_OPEN 0x0008
220#define SCTP_STATE_SHUTDOWN 0x0010
221#define SCTP_STATE_SHUTDOWN_RECV 0x0020
222#define SCTP_STATE_SHUTDOWN_ACK_SENT 0x0040
223#define SCTP_STATE_SHUTDOWN_PEND 0x0080
224#define SCTP_STATE_MASK 0x007f
225/* SCTP reachability state for each address */
226#define SCTP_ADDR_NOT_REACHABLE 1
227#define SCTP_ADDR_REACHABLE 2
228#define SCTP_ADDR_NOHB 4
229#define SCTP_ADDR_BEING_DELETED 8
230
231/* How long a cookie lives */
232#define SCTP_DEFAULT_COOKIE_LIFE 60 /* seconds */
233
234/* resource limit of streams */
235#define MAX_SCTP_STREAMS 2048
236
237
238/* guess at how big to make the TSN mapping array */
239#define SCTP_STARTING_MAPARRAY 10000
240
241/* Here we define the timer types used
242 * by the implementation has
243 * arguments in the set/get timer type calls.
244 */
245#define SCTP_TIMER_INIT 0
246#define SCTP_TIMER_RECV 1
247#define SCTP_TIMER_SEND 2
248#define SCTP_TIMER_SHUTDOWN 3
249#define SCTP_TIMER_HEARTBEAT 4
250#define SCTP_TIMER_PMTU 5
251/* number of timer types in the base SCTP
252 * structure used in the set/get and has
253 * the base default.
254 */
255#define SCTP_NUM_TMRS 6
256
257
258
259#define SCTP_IPV4_ADDRESS 2
260#define SCTP_IPV6_ADDRESS 4
261
262/* timer types */
263#define SctpTimerTypeNone 0
264#define SctpTimerTypeSend 1
265#define SctpTimerTypeInit 2
266#define SctpTimerTypeRecv 3
267#define SctpTimerTypeShutdown 4
268#define SctpTimerTypeHeartbeat 5
269#define SctpTimerTypeCookie 6
270#define SctpTimerTypeNewCookie 7
271#define SctpTimerTypePathMtuRaise 8
272#define SctpTimerTypeShutdownAck 9
273#define SctpTimerTypeRelReq 10
274
275/* Here are the timer directives given to the
276 * user provided function
277 */
278#define SCTP_TIMER_START 1
279#define SCTP_TIMER_STOP 2
280
281/* running flag states in timer structure */
282#define SCTP_TIMER_IDLE 0x0
283#define SCTP_TIMER_EXPIRED 0x1
284#define SCTP_TIMER_RUNNING 0x2
285
286
287/* number of simultaneous timers running */
288#define SCTP_MAX_NET_TIMERS 6 /* base of where net timers start */
289#define SCTP_NUMBER_TIMERS 12 /* allows up to 6 destinations */
290
291
292/* Of course we really don't collect stale cookies, being
293 * folks of decerning taste. However we do count them, if
294 * we get to many before the association comes up.. we
295 * give up. Below is the constant that dictates when
296 * we give it up...this is a implemenation dependant
297 * treatment. In ours we do not ask for a extension of
298 * time, but just retry this many times...
299 */
300#define SCTP_MAX_STALE_COOKIES_I_COLLECT 10
301
302/* max number of TSN's dup'd that I will hold */
303#define SCTP_MAX_DUP_TSNS 20
304
305/* Here we define the types used when
306 * setting the retry ammounts.
307 */
308/* constants for type of set */
309#define SCTP_MAXATTEMPT_INIT 2
310#define SCTP_MAXATTEMPT_SEND 3
311
312/* Here we define the default timers and the
313 * default number of attemts we make for
314 * each respective side (send/init).
315 */
316
317/* init timer def = 3sec */
318#define SCTP_INIT_SEC 3
319#define SCTP_INIT_NSEC 0
320
321/* send timer def = 3 seconds */
322#define SCTP_SEND_SEC 1
323#define SCTP_SEND_NSEC 0
324
325/* recv timer def = 200ms (in nsec) */
326#define SCTP_RECV_SEC 0
327#define SCTP_RECV_NSEC 200000000
328
329/* 30 seconds + RTO */
330#define SCTP_HB_SEC 30
331#define SCTP_HB_NSEC 0
332
333
334/* 300 ms */
335#define SCTP_SHUTDOWN_SEC 0
336#define SCTP_SHUTDOWN_NSEC 300000000
337
338#define SCTP_RTO_UPPER_BOUND 60000000 /* 60 sec in micro-second's */
339#define SCTP_RTO_UPPER_BOUND_SEC 60 /* for the init timer */
340#define SCTP_RTO_LOWER_BOUND 1000000 /* 1 sec in micro-sec's */
341
342#define SCTP_DEF_MAX_INIT 8
343#define SCTP_DEF_MAX_SEND 10
344
345#define SCTP_DEF_PMTU_RAISE 600 /* 10 Minutes between raise attempts */
346#define SCTP_DEF_PMTU_MIN 600
347
348#define SCTP_MSEC_IN_A_SEC 1000
349#define SCTP_USEC_IN_A_SEC 1000000
350#define SCTP_NSEC_IN_A_SEC 1000000000
351
352
353/* Events that SCTP will look for, these
354 * are or'd together to declare what SCTP
355 * wants. Each select mask/poll list should be
356 * set for the fd, if the bit is on.
357 */
358#define SCTP_EVENT_READ 0x000001
359#define SCTP_EVENT_WRITE 0x000002
360#define SCTP_EVENT_EXCEPT 0x000004
361
362/* The following constant is a value for this
363 * particular implemenation. It is quite arbitrary and
364 * is used to limit how much data will be queued up to
365 * a sender, waiting for cwnd to be larger than flightSize.
366 * All implementations will need this protection is some
367 * way due to buffer size constraints.
368 */
369
370#define SCTP_MAX_OUTSTANDING_DG 10000
371
372
373
374/* This constant (SCTP_MAX_READBUFFER) define
375 * how big the read/write buffer is
376 * when we enter the fd event notification
377 * the buffer is put on the stack, so the bigger
378 * it is the more stack you chew up, however it
379 * has got to be big enough to handle the bigest
380 * message this O/S will send you. In solaris
381 * with sockets (not TLI) we end up at a value
382 * of 64k. In TLI we could do partial reads to
383 * get it all in with less hassel.. but we
384 * write to sockets for generality.
385 */
386#define SCTP_MAX_READBUFFER 65536
387#define SCTP_ADDRMAX 60
388
389/* amount peer is obligated to have in rwnd or
390 * I will abort
391 */
392#define SCTP_MIN_RWND 1500
393
394#define SCTP_WINDOW_MIN 1500 /* smallest rwnd can be */
395#define SCTP_WINDOW_MAX 1048576 /* biggest I can grow rwnd to
396 * My playing around suggests a
397 * value greater than 64k does not
398 * do much, I guess via the kernel
399 * limitations on the stream/socket.
400 */
401
402#define SCTP_MAX_BUNDLE_UP 256 /* max number of chunks I can bundle */
403
404/* I can handle a 1meg re-assembly */
405#define SCTP_DEFAULT_MAXMSGREASM 1048576
406
407
408#define SCTP_DEFAULT_MAXWINDOW 32768 /* default rwnd size */
409#define SCTP_DEFAULT_MAXSEGMENT 1500 /* MTU size, this is the default
410 * to which we set the smallestMTU
411 * size to. This governs what is the
412 * largest size we will use, of course
413 * PMTU will raise this up to
414 * the largest interface MTU or the
415 * ceiling below if there is no
416 * SIOCGIFMTU.
417 */
418#ifdef LYNX
419#define DEFAULT_MTU_CEILING 1500 /* Since Lynx O/S is brain dead
420 * in the way it handles the
421 * raw IP socket, insisting
422 * on makeing its own IP
423 * header, we limit the growth
424 * to that of the e-net size
425 */
426#else
427#define DEFAULT_MTU_CEILING 2048 /* If no SIOCGIFMTU, highest value
428 * to raise the PMTU to, i.e.
429 * don't try to raise above this
430 * value. Tune this per your
431 * largest MTU interface if your
432 * system does not support the
433 * SIOCGIFMTU ioctl.
434 */
435#endif
436#define SCTP_DEFAULT_MINSEGMENT 512 /* MTU size ... if no mtu disc */
437#define SCTP_HOW_MANY_SECRETS 2 /* how many secrets I keep */
438/* This is how long a secret lives, NOT how long a cookie lives */
439#define SCTP_HOW_LONG_COOKIE_LIVE 3600 /* how many seconds the current secret will live */
440
441#define SCTP_NUMBER_OF_SECRETS 8 /* or 8 * 4 = 32 octets */
442#define SCTP_SECRET_SIZE 32 /* number of octets in a 256 bits */
443
444#ifdef USE_MD5
445#define SCTP_SIGNATURE_SIZE 16 /* size of a MD5 signature */
446#else
447#define SCTP_SIGNATURE_SIZE 20 /* size of a SLA-1 signature */
448#endif
449/* Here are the notification constants
450 * that the code and upper layer will get
451 */
452
453/* association is up */
454#define SCTP_NOTIFY_ASSOC_UP 1
455
456/* association is down */
457#define SCTP_NOTIFY_ASSOC_DOWN 2
458
459/* interface on a association is down
460 * and out of consideration for selection.
461 */
462#define SCTP_NOTIFY_INTF_DOWN 3
463
464/* interface on a association is up
465 * and now back in consideration for selection.
466 */
467#define SCTP_NOTIFY_INTF_UP 4
468
469/* The given datagram cannot be delivered
470 * to the peer, this will probably be followed
471 * by a SCTP_NOTFIY_ASSOC_DOWN.
472 */
473#define SCTP_NOTIFY_DG_FAIL 5
474
475/* Sent dg on non-open stream extreme code error!
476 */
477#define SCTP_NOTIFY_STRDATA_ERR 6
478
479#define SCTP_NOTIFY_ASSOC_ABORTED 7
480
481/* The stream ones are not used yet, but could
482 * be when a association opens.
483 */
484#define SCTP_NOTIFY_PEER_OPENED_STR 8
485#define SCTP_NOTIFY_STREAM_OPENED_OK 9
486
487/* association sees a restart event */
488#define SCTP_NOTIFY_ASSOC_RESTART 10
489
490/* a user requested HB returned */
491#define SCTP_NOTIFY_HB_RESP 11
492
493/* a result from a REL-REQ */
494#define SCTP_NOTIFY_RELREQ_RESULT_OK 12
495#define SCTP_NOTIFY_RELREQ_RESULT_FAILED 13
496
497/* clock variance is 10ms or 10,000 us's */
498#define SCTP_CLOCK_GRAINULARITY 10000
499
500#define IP_HDR_SIZE 40 /* we use the size of a IP6 header here
501 * this detracts a small amount for ipv4
502 * but it simplifies the ipv6 addition
503 */
504
505#define SCTP_NUM_FDS 3
506
507/* raw IP filedescriptor */
508#define SCTP_FD_IP 0
509/* raw ICMP filedescriptor */
510#define SCTP_FD_ICMP 1
511/* processes contact me for requests here */
512#define SCTP_REQUEST 2
513
514
515#define SCTP_DEAMON_PORT 9899
516
517/* Deamon registration message types/responses */
518#define DEAMON_REGISTER 0x01
519#define DEAMON_REGISTER_ACK 0x02
520#define DEAMON_DEREGISTER 0x03
521#define DEAMON_DEREGISTER_ACK 0x04
522#define DEAMON_CHECKADDR_LIST 0x05
523
524#define DEAMON_MAGIC_VER_LEN 0xff
525
526/* max times I will attempt to send a message to deamon */
527#define SCTP_MAX_ATTEMPTS_AT_DEAMON 5
528#define SCTP_TIMEOUT_IN_POLL_FOR_DEAMON 1500 /* 1.5 seconds */
529
530/* modular comparison */
531/* True if a > b (mod = M) */
532#define compare_with_wrap(a, b, M) ((a > b) && ((a - b) < (M >> 1))) || \
533 ((b > a) && ((b - a) > (M >> 1)))
534
535#ifndef TIMEVAL_TO_TIMESPEC
536#define TIMEVAL_TO_TIMESPEC(tv, ts) \
537{ \
538 (ts)->tv_sec = (tv)->tv_sec; \
539 (ts)->tv_nsec = (tv)->tv_usec * 1000; \
540}
541#endif
542
543/* pegs */
544#define SCTP_NUMBER_OF_PEGS 21
545/* peg index's */
546#define SCTP_PEG_SACKS_SEEN 0
547#define SCTP_PEG_SACKS_SENT 1
548#define SCTP_PEG_TSNS_SENT 2
549#define SCTP_PEG_TSNS_RCVD 3
550#define SCTP_DATAGRAMS_SENT 4
551#define SCTP_DATAGRAMS_RCVD 5
552#define SCTP_RETRANTSN_SENT 6
553#define SCTP_DUPTSN_RECVD 7
554#define SCTP_HBR_RECV 8
555#define SCTP_HBA_RECV 9
556#define SCTP_HB_SENT 10
557#define SCTP_DATA_DG_SENT 11
558#define SCTP_DATA_DG_RECV 12
559#define SCTP_TMIT_TIMER 13
560#define SCTP_RECV_TIMER 14
561#define SCTP_HB_TIMER 15
562#define SCTP_FAST_RETRAN 16
563#define SCTP_PEG_TSNS_READ 17
564#define SCTP_NONE_LFT_TO 18
565#define SCTP_NONE_LFT_RWND 19
566#define SCTP_NONE_LFT_CWND 20
567
568
569
570#endif
571