dump - Bring in FreeBSD's dumping (new dumps & minidumps)
[dragonfly.git] / Makefile.inc1
... / ...
CommitLineData
1#
2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
3# $DragonFly: src/Makefile.inc1,v 1.118 2008/06/24 20:22:30 thomas Exp $
4#
5# Build-time options are documented in make.conf(5).
6#
7# The intended user-driven targets are:
8#
9# buildworld - rebuild *everything*, including glue to help do upgrades
10# quickworld - skip the glue and do a depend+build on the meat
11# realquickworld - skip the glue and depend stages and just build the meat
12# crossworld - only build the glue (particularly the cross-build environment)
13# installworld- install everything built by "buildworld"
14# most - build user commands, no libraries or include files
15# installmost - install user commands, no libraries or include files
16#
17# Standard targets (not defined here) are documented in the makefiles in
18# /usr/share/mk. These include:
19# obj depend all install clean cleandepend cleanobj
20
21# Put initial settings here.
22SUBDIR=
23
24# We must do share/info early so that installation of info `dir'
25# entries works correctly. Do it first since it is less likely to
26# grow dependencies on include and lib than vice versa.
27.if exists(${.CURDIR}/share/info)
28SUBDIR+= share/info
29.endif
30
31# We must do include and lib early so that the perl *.ph generation
32# works correctly as it uses the header files installed by this.
33.if exists(${.CURDIR}/include)
34SUBDIR+= include
35.endif
36.if exists(${.CURDIR}/lib)
37SUBDIR+= lib
38.endif
39# This exists simply to ensure that the obj dir hierarchy is
40# intact for nrelease, allowing the nrelease Makefile's to
41# reference ${.OBJDIR}.
42#
43.if exists(${.CURDIR}/nrelease)
44SUBDIR+= nrelease
45.endif
46
47.if exists(${.CURDIR}/bin)
48SUBDIR+= bin
49.endif
50.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
51SUBDIR+= games
52.endif
53.if exists(${.CURDIR}/gnu)
54SUBDIR+= gnu
55.endif
56.if exists(${.CURDIR}/libexec)
57SUBDIR+= libexec
58.endif
59.if exists(${.CURDIR}/sbin)
60SUBDIR+= sbin
61.endif
62.if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
63SUBDIR+= secure
64.endif
65.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
66SUBDIR+= share
67.endif
68.if exists(${.CURDIR}/sys)
69SUBDIR+= sys
70.endif
71.if exists(${.CURDIR}/usr.bin)
72SUBDIR+= usr.bin
73.endif
74.if exists(${.CURDIR}/usr.sbin)
75SUBDIR+= usr.sbin
76.endif
77
78.if exists(${.CURDIR}/etc)
79SUBDIR+= etc
80.endif
81
82# These are last, since it is nice to at least get the base system
83# rebuilt before you do them.
84.if defined(LOCAL_DIRS)
85.for _DIR in ${LOCAL_DIRS}
86.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
87SUBDIR+= ${_DIR}
88.endif
89.endfor
90.endif
91
92.if defined(SUBDIR_OVERRIDE)
93SUBDIR= ${SUBDIR_OVERRIDE}
94.endif
95
96.if defined(NOCLEANDIR)
97CLEANDIR= clean cleandepend
98.else
99CLEANDIR= cleandir
100.endif
101
102.if defined(NO_CLEAN)
103NOCLEAN= # defined
104.endif
105
106# Object directory base in primary make. Note that when we rerun make
107# from inside this file we change MAKEOBJDIRPREFIX to the appropriate
108# subdirectory because the rest of the build system needs it that way.
109# The original object directory base is saved in OBJTREE.
110#
111MAKEOBJDIRPREFIX?= /usr/obj
112OBJTREE?= ${MAKEOBJDIRPREFIX}
113
114# Used for stage installs and pathing
115#
116DESTDIRBASE?= ${OBJTREE}${.CURDIR}
117
118# Remove DESTDIR from MAKEFLAGS. It is present in the environment
119# anyhow, and we need to be able to override it for stage installs
120.MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*}
121
122# This sets the compiler we use to build the world/kernel with
123WORLD_CCVER?= gcc41
124WORLD_BINUTILSVER?= binutils217
125
126# temporary until everybody has converted to x86_64
127.if ${MACHINE_ARCH} == "amd64"
128MACHINE_ARCH= x86_64
129.makeenv MACHINE_ARCH
130.endif
131
132TARGET_ARCH?= ${MACHINE_ARCH}
133.if ${TARGET_ARCH} == ${MACHINE_ARCH}
134TARGET?= ${MACHINE}
135.else
136TARGET?= ${TARGET_ARCH}
137.endif
138.if make(buildworld)
139BUILD_ARCH!= sysctl -n hw.machine_arch
140
141# temporary until everybody has converted to x86_64
142.if ${BUILD_ARCH} == "amd64"
143BUILD_ARCH= x86_64
144.endif
145
146.if ${MACHINE_ARCH} != ${BUILD_ARCH}
147.error To cross-build, set TARGET_ARCH.
148.endif
149.endif
150
151# Backwards compatibility with older make's or older sys.mk's. make
152# is expected to define MACHINE_PLATFORM.
153#
154.if !defined(MACHINE_PLATFORM)
155MACHINE_PLATFORM= pc32
156.endif
157
158# XXX this is ugly and we need to come up with a nicer solution
159.if !defined(TARGET_PLATFORM)
160.if ${TARGET_ARCH} == "i386"
161TARGET_PLATFORM= pc32
162.elif ${TARGET_ARCH} == "x86_64"
163TARGET_PLATFORM= pc64
164.else
165.error Unknown target architecture.
166.endif
167.endif
168
169THREAD_LIB?= thread_xu
170.if ${THREAD_LIB} == "c_r"
171.if defined(NO_LIBC_R)
172.error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
173.endif
174.endif
175
176# BTOOLS (Natively built) All non-cross-development tools that the
177# main build needs. This includes things like 'mkdir' and 'rm'.
178# We will not use the native system's exec path once we start
179# on WORLD. (bootstrap-tools and build-tools or BTOOLS)
180#
181# CTOOLS (Natively built) Cross development tools which are specific
182# to the target architecture.
183#
184# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and
185# CTOOLS.
186#
187# MACHINE_PLATFORM Platform Architecture we are building on
188# MACHINE Machine Architecture (usually the same as MACHINE_ARCH)
189# MACHINE_ARCH Cpu Architecture we are building on
190#
191# TARGET_PLATFORM Platform Architecture we are building for
192# TARGET Machine Architecture we are building for
193# TARGET_ARCH Cpu Architecture we are building for
194#
195BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH}
196CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
197WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH}
198
199# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
200# cross-tools stages to augment the existing command path to access newer
201# versions of certain utilities such as 'patch' that the cross-tools stage
202# might expect.
203#
204BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
205
206# The strict temporary command path contains all binaries required
207# by the buildworld system after the cross-tools stage.
208#
209STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
210
211TMPDIR?= /tmp
212TMPPID!= echo $$$$
213
214#
215# Building a world goes through the following stages
216#
217# 1. bootstrap-tool stage [BMAKE]
218# This stage is responsible for creating programs that
219# are needed for backward compatibility reasons. They
220# are not built as cross-tools.
221# 2. build-tool stage [TMAKE]
222# This stage is responsible for creating the object
223# tree and building any tools that are needed during
224# the build process.
225# 3. cross-tool stage [XMAKE]
226# This stage is responsible for creating any tools that
227# are needed for cross-builds. A cross-compiler is one
228# of them.
229# 4. world stage [WMAKE]
230# This stage actually builds the world.
231# 5. install stage (optional) [IMAKE]
232# This stage installs a previously built world.
233#
234
235# bootstrap-tool stage
236#
237BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
238 OBJTREE=${OBJTREE} \
239 DESTDIR=${BTOOLSDEST} \
240 PATH=${BTOOLSPATH}:${PATH} \
241 INSTALL="sh ${.CURDIR}/tools/install.sh"
242
243BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
244 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
245 -DNO_WERROR -DNO_NLS
246
247# build-tool stage
248#
249TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
250 OBJTREE=${OBJTREE} \
251 DESTDIR= \
252 PATH=${BTOOLSPATH}:${PATH} \
253 INSTALL="sh ${.CURDIR}/tools/install.sh"
254
255TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
256 -DNO_FORTRAN -DNOSHARED
257
258# cross-tool stage
259#
260# note: TOOLS_PREFIX points to the obj root holding the cross
261# compiler binaries, while USRDATA_PREFIX points to the obj root
262# holding the target environment (and also determines where cross-built
263# libraries, crt*.o, and include files are installed).
264#
265XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \
266 OBJTREE=${OBJTREE} \
267 DESTDIR=${CTOOLSDEST} \
268 INSTALL="sh ${.CURDIR}/tools/install.sh" \
269 TOOLS_PREFIX=${CTOOLSDEST} \
270 USRDATA_PREFIX=${WORLDDEST} \
271 PATH=${BTOOLSPATH}:${PATH}
272
273XMAKE= ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
274 -DBOOTSTRAPPING -DNOSHARED
275
276# world stage, note the strict path and note that TOOLS_PREFIX is left
277# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
278# which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
279# for both binary and library paths, even though it is being compiled to
280# WORLDDEST. None of the programs in the world stage are ever actually
281# executed during the buildworld/installworld.
282#
283CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \
284 OBJTREE=${OBJTREE} \
285 MACHINE_ARCH=${TARGET_ARCH} \
286 MACHINE=${TARGET} \
287 MACHINE_PLATFORM=${TARGET_PLATFORM} \
288 OBJFORMAT_PATH=${CTOOLSDEST} \
289 HOST_CCVER=${HOST_CCVER} \
290 CCVER=${WORLD_CCVER} \
291 BINUTILSVER=${WORLD_BINUTILSVER}
292
293WMAKEENV= ${CROSSENV} \
294 DESTDIR=${WORLDDEST} \
295 INSTALL="sh ${.CURDIR}/tools/install.sh" \
296 PATH=${STRICTTMPPATH}
297
298WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
299
300# install stage
301#
302IMAKEENV= ${CROSSENV} \
303 PATH=${STRICTTMPPATH}
304IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
305
306# kernel stage
307#
308KMAKEENV= ${WMAKEENV}
309
310# buildworld
311#
312# Attempt to rebuild the entire system, with reasonable chance of
313# success, regardless of how old your existing system is.
314#
315_worldtmp: _cleantmp _mtreetmp
316.ORDER: _cleantmp _mtreetmp
317
318_cleantmp:
319 @echo
320 @echo "--------------------------------------------------------------"
321 @echo ">>> Rebuilding the temporary build tree"
322 @echo "--------------------------------------------------------------"
323.if !defined(NOCLEAN)
324 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
325.else
326 # XXX - These two can depend on any header file.
327 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
328 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
329.endif
330
331_mtreetmp:
332 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
333.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
334 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
335 -p ${_dir}/ > /dev/null
336 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
337 -p ${_dir}/usr > /dev/null
338.endfor
339 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
340 -p ${WORLDDEST}/usr/include > /dev/null
341 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
342
343_bootstrap-tools:
344 @echo
345 @echo "--------------------------------------------------------------"
346 @echo ">>> stage 1: bootstrap tools"
347 @echo "--------------------------------------------------------------"
348 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
349_cleanobj:
350 @echo
351 @echo "--------------------------------------------------------------"
352 @echo ">>> stage 2a: cleaning up the object tree"
353 @echo "--------------------------------------------------------------"
354 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
355_obj:
356 @echo
357 @echo "--------------------------------------------------------------"
358 @echo ">>> stage 2b: rebuilding the object tree"
359 @echo "--------------------------------------------------------------"
360 cd ${.CURDIR}; ${WMAKE} par-obj
361_build-tools:
362 @echo
363 @echo "--------------------------------------------------------------"
364 @echo ">>> stage 2c: build tools"
365 @echo "--------------------------------------------------------------"
366 cd ${.CURDIR}; ${TMAKE} build-tools
367_cross-tools:
368 @echo
369 @echo "--------------------------------------------------------------"
370 @echo ">>> stage 3: cross tools"
371 @echo "--------------------------------------------------------------"
372 cd ${.CURDIR}; ${XMAKE} cross-tools
373_includes:
374 @echo
375 @echo "--------------------------------------------------------------"
376 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
377 @echo "--------------------------------------------------------------"
378 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
379_libraries:
380 @echo
381 @echo "--------------------------------------------------------------"
382 @echo ">>> stage 4b: building libraries"
383 @echo "--------------------------------------------------------------"
384 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
385_depend:
386 @echo
387 @echo "--------------------------------------------------------------"
388 @echo ">>> stage 4c: make dependencies"
389 @echo "--------------------------------------------------------------"
390 cd ${.CURDIR}; ${WMAKE} par-depend
391everything:
392 @echo
393 @echo "--------------------------------------------------------------"
394 @echo ">>> stage 4d: building everything.."
395 @echo "--------------------------------------------------------------"
396 cd ${.CURDIR}; ${WMAKE} all
397
398# note: buildworld no longer depends on _cleanobj because we rm -rf the
399# entire object tree and built the bootstrap tools in a different location.
400#
401# buildworld - build everything from scratch
402# quickworld - skip the bootstrap, build, and cross-build steps
403# realquickworld - skip the bootstrap, build, crossbuild, and depend step.
404#
405# note: we include _obj in realquickworld to prevent accidental creation
406# of files in /usr/src.
407
408WMAKE_TGTS=
409.if !defined(SUBDIR_OVERRIDE)
410WMAKE_TGTS+= _worldtmp _bootstrap-tools
411.endif
412WMAKE_TGTS+= _obj _build-tools
413.if !defined(SUBDIR_OVERRIDE)
414WMAKE_TGTS+= _cross-tools
415.endif
416WMAKE_TGTS+= _includes _libraries _depend everything
417
418buildworld: ${WMAKE_TGTS}
419
420quickworld: _mtreetmp _obj _includes _libraries _depend everything
421
422realquickworld: _mtreetmp _obj _includes _libraries everything
423
424crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
425
426.ORDER: ${WMAKE_TGTS}
427.ORDER: _obj _includes
428.ORDER: _mtreetmp _obj
429
430#
431# installcheck
432#
433# Checks to be sure system is ready for installworld
434#
435installcheck:
436.if !defined(NO_SENDMAIL)
437 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
438 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
439.endif
440 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
441 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; exit 1)
442 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
443.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
444 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; exit 1;; esac
445.endif
446#
447# installworld
448#
449# Installs everything compiled by a 'buildworld'.
450#
451installworld: installcheck
452 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
453 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
454
455#
456# reinstall
457#
458# If you have a build server, you can NFS mount the source and obj directories
459# and do a 'make reinstall' on the *client* to install new binaries from the
460# most recent server build.
461#
462reinstall:
463 @echo "--------------------------------------------------------------"
464 @echo ">>> Making hierarchy"
465 @echo "--------------------------------------------------------------"
466 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
467 @echo
468 @echo "--------------------------------------------------------------"
469 @echo ">>> Installing everything.."
470 @echo "--------------------------------------------------------------"
471 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
472.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
473 @echo
474 @echo "--------------------------------------------------------------"
475 @echo ">>> Rebuilding man page indices"
476 @echo "--------------------------------------------------------------"
477 cd ${.CURDIR}/share/man; ${MAKE} makedb
478.endif
479
480#
481# buildkernel, nativekernel, quickkernel, and installkernel
482#
483# Which kernels to build and/or install is specified by setting
484# KERNCONF. If not defined a GENERIC kernel is built/installed.
485# Only the existing (depending TARGET) config files are used
486# for building kernels and only the first of these is designated
487# as the one being installed.
488#
489# You can specify INSTALLSTRIPPED=1 if you wish the installed
490# kernel and modules to be stripped of its debug info (required
491# symbols are left intact). You can specify INSTALLSTRIPPEDMODULES
492# if you only want to strip the modules of their debug info. These
493# only apply if you have DEBUG=-g in your kernel config or make line.
494#
495# Note that we have to use TARGET instead of TARGET_ARCH when
496# we're in kernel-land. Since only TARGET_ARCH is (expected) to
497# be set to cross-build, we have to make sure TARGET is set
498# properly.
499
500.if !defined(KERNCONF) && defined(KERNEL)
501KERNCONF= ${KERNEL}
502KERNWARN= yes
503.else
504# XXX makeshift fix to build the right kernel for the (target) architecture
505# We should configure this in the platform files somehow
506.if ${TARGET_ARCH} == "i386"
507KERNCONF?= GENERIC
508.else
509KERNCONF?= X86_64_GENERIC
510.endif
511.endif
512INSTKERNNAME?= kernel
513
514KRNLSRCDIR= ${.CURDIR}/sys
515KRNLCONFDIR= ${KRNLSRCDIR}/config
516KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
517KERNCONFDIR?= ${KRNLCONFDIR}
518
519BUILDKERNELS=
520INSTALLKERNEL=
521.for _kernel in ${KERNCONF}
522.if exists(${KERNCONFDIR}/${_kernel})
523BUILDKERNELS+= ${_kernel}
524.if empty(INSTALLKERNEL)
525INSTALLKERNEL= ${_kernel}
526.endif
527.endif
528.endfor
529
530# kernel version numbers survive rm -rf
531#
532.for _kernel in ${BUILDKERNELS}
533.if exists(${KRNLOBJDIR}/${_kernel}/version)
534KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
535.endif
536.endfor
537
538#
539# buildkernel
540#
541# Builds all kernels defined by BUILDKERNELS.
542#
543bk_tools:
544 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
545 echo "You must buildworld before buildkernel. If you wish"; \
546 echo "to build a kernel using native tools, config it manually"; \
547 echo "or use the nativekernel target if you are in a rush"; \
548 exit 1; \
549 fi
550
551maybe_bk_tools:
552.for _kernel in ${BUILDKERNELS}
553 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
554 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
555 echo "The kernel was build using buildworld tools which no" ; \
556 echo "longer appear to exist, quickkernel failed!" ; \
557 exit 1; \
558 fi; \
559 fi
560.endfor
561
562bk_build_list:
563.if empty(BUILDKERNELS)
564 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
565 @echo ">>> Did you move your kernel configs from i386/conf to config/?"
566 @false
567.endif
568
569bk_kernwarn:
570.if defined(KERNWARN)
571 @echo "--------------------------------------------------------------"
572 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
573 @echo "--------------------------------------------------------------"
574 @sleep 3
575.endif
576 @echo
577
578# The buildkernel target rebuilds the specified kernels from scratch
579# using the crossbuild tools generated by the last buildworld. It is
580# the safest (but also the most time consuming) way to build a new kernel.
581#
582buildkernel: bk_tools bk_build_list bk_kernwarn
583.for _kernel in ${BUILDKERNELS}
584 @echo "--------------------------------------------------------------"
585 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
586 @echo "--------------------------------------------------------------"
587 @echo "===> ${_kernel}"
588.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
589 rm -rf ${KRNLOBJDIR}/${_kernel}
590.else
591 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
592 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
593 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
594.endif
595 mkdir -p ${KRNLOBJDIR}
596.if !defined(NO_KERNELCONFIG)
597 cd ${KRNLCONFDIR}; \
598 PATH=${STRICTTMPPATH} \
599 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
600 ${KERNCONFDIR}/${_kernel}
601.endif
602.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
603 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
604.endif
605 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
606.if !defined(NO_KERNELDEPEND)
607 cd ${KRNLOBJDIR}/${_kernel}; \
608 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
609.endif
610 cd ${KRNLOBJDIR}/${_kernel}; \
611 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
612 @echo "--------------------------------------------------------------"
613 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
614 @echo "--------------------------------------------------------------"
615.endfor
616
617# The nativekernel target rebuilds the specified kernels from scratch
618# using the system's standard compiler rather than using the crossbuild
619# tools generated by the last buildworld. This is fairly safe if your
620# system is reasonable up-to-date.
621#
622nativekernel: bk_build_list bk_kernwarn
623.for _kernel in ${BUILDKERNELS}
624 @echo "--------------------------------------------------------------"
625 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
626 @echo "--------------------------------------------------------------"
627 @echo "===> ${_kernel}"
628.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
629 rm -rf ${KRNLOBJDIR}/${_kernel}
630.else
631 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
632 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
633 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
634.endif
635 mkdir -p ${KRNLOBJDIR}
636.if !defined(NO_KERNELCONFIG)
637 cd ${KRNLCONFDIR}; \
638 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
639 ${KERNCONFDIR}/${_kernel}
640.endif
641.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
642 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
643.endif
644 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
645 cd ${KRNLOBJDIR}/${_kernel}; \
646 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
647 ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
648.if !defined(NO_KERNELDEPEND)
649 cd ${KRNLOBJDIR}/${_kernel}; \
650 ${MAKE} KERNEL=${INSTKERNNAME} depend
651.endif
652 cd ${KRNLOBJDIR}/${_kernel}; \
653 ${MAKE} KERNEL=${INSTKERNNAME} all
654 @echo "--------------------------------------------------------------"
655 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
656 @echo "--------------------------------------------------------------"
657.endfor
658
659# The quickkernel target rebuilds the specified kernels as quickly
660# as possible. It will use the native tools or the buildworld cross tools
661# based on whether the kernel was originally generated via buildkernel or
662# nativekernel. Config is rerun but the object hierarchy is not rebuilt,
663# nor is the make depend step run.
664#
665quickkernel: maybe_bk_tools bk_build_list bk_kernwarn
666.for _kernel in ${BUILDKERNELS}
667 @echo "--------------------------------------------------------------"
668 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
669 @echo "--------------------------------------------------------------"
670 @echo "===> ${_kernel}"
671.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
672.if !defined(NO_KERNELCONFIG)
673 cd ${KRNLCONFDIR}; \
674 PATH=${STRICTTMPPATH} \
675 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
676 ${KERNCONFDIR}/${_kernel}
677.endif
678 cd ${KRNLOBJDIR}/${_kernel}; \
679 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
680.else
681.if !defined(NO_KERNELCONFIG)
682 cd ${KRNLCONFDIR}; \
683 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
684 ${KERNCONFDIR}/${_kernel}
685.endif
686 cd ${KRNLOBJDIR}/${_kernel}; \
687 ${MAKE} KERNEL=${INSTKERNNAME} all
688.endif
689 @echo "--------------------------------------------------------------"
690 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
691 @echo "--------------------------------------------------------------"
692.endfor
693
694
695# installkernel
696#
697# Install the kernel defined by INSTALLKERNEL
698#
699installkernel reinstallkernel:
700 @echo "--------------------------------------------------------------"
701 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
702 @echo "--------------------------------------------------------------"
703.if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
704 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
705 ${IMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
706.else
707 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
708 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
709.endif
710
711#
712# most
713#
714# Build most of the user binaries on the existing system libs and includes.
715#
716most:
717 @echo "--------------------------------------------------------------"
718 @echo ">>> Building programs only"
719 @echo "--------------------------------------------------------------"
720.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
721 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all
722.endfor
723
724#
725# installmost
726#
727# Install the binaries built by the 'most' target. This does not include
728# libraries or include files.
729#
730installmost:
731 @echo "--------------------------------------------------------------"
732 @echo ">>> Installing programs only"
733 @echo "--------------------------------------------------------------"
734.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
735 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install
736.endfor
737
738#
739# ------------------------------------------------------------------------
740#
741# From here onwards are utility targets used by the 'make world' and
742# related targets. If your 'world' breaks, you may like to try to fix
743# the problem and manually run the following targets to attempt to
744# complete the build. Beware, this is *not* guaranteed to work, you
745# need to have a pretty good grip on the current state of the system
746# to attempt to manually finish it. If in doubt, 'make world' again.
747#
748
749# bootstrap-tools: Build all tools required to build all tools. Note that
750# order is important in a number of cases and also note that the bootstrap
751# and build tools stages have access to earlier binaries they themselves
752# had generated.
753#
754# patch: older patch's do not have -i. This program must be built
755# first so other bootstrap tools that need to apply patches
756# can use it.
757# [x]install: dependancies on various new install features
758# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
759# envs are not compatible with older objformat binaries.
760#
761.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
762_strfile= games/fortune/strfile
763.endif
764
765bootstrap-tools:
766 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
767.for _tool in ${_strfile} \
768 usr.bin/patch \
769 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo bin/test \
770 bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
771 bin/hostname bin/kill \
772 usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
773 usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/stat \
774 usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
775 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
776 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
777 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
778 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
779 usr.bin/cap_mkdb usr.bin/true usr.bin/false \
780 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
781 usr.bin/tail \
782 usr.sbin/chown usr.sbin/mtree usr.sbin/config \
783 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
784 gnu/usr.bin/texinfo gnu/usr.bin/grep gnu/usr.bin/sort \
785 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb
786 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
787 cd ${.CURDIR}/${_tool}; \
788 ${MAKE} DIRPRFX=${_tool}/ obj; \
789 ${MAKE} DIRPRFX=${_tool}/ depend; \
790 ${MAKE} DIRPRFX=${_tool}/ all; \
791 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
792.endfor
793 touch ${BTOOLSDEST}/.bootstrap_done
794
795# build-tools: Build special purpose build tools.
796#
797# XXX we may be able to remove or consolidate this into bootstrap-tools
798# now that we have the native helper (.nx/.no) infrastructure.
799#
800.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
801_share= share/syscons/scrnmaps
802.endif
803
804_gcc41_cross= gnu/usr.bin/cc41
805_gcc41_tools= gnu/usr.bin/cc41/cc_prep gnu/usr.bin/cc41/cc_tools
806.if !defined(NO_GCC44)
807_gcc44_cross= gnu/usr.bin/cc44
808_gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools
809.endif
810_custom_cross= libexec/customcc
811_binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
812
813build-tools:
814.for _tool in ${_gcc41_tools} ${_gcc44_tools} ${_libkrb5} ${_share}
815 ${ECHODIR} "===> ${_tool} (build-tools)"; \
816 cd ${.CURDIR}/${_tool}; \
817 ${MAKE} DIRPRFX=${_tool}/ obj; \
818 ${MAKE} DIRPRFX=${_tool}/ depend; \
819 ${MAKE} DIRPRFX=${_tool}/ all; \
820 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
821.endfor
822 touch ${BTOOLSDEST}/.build_done
823
824#
825# cross-tools: Build cross-building tools
826#
827.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
828_btxld= usr.sbin/btxld
829.endif
830
831cross-tools:
832.for _tool in ${_btxld} ${_binutils} \
833 usr.bin/objformat \
834 ${_gcc41_cross} ${_gcc44_cross} ${_custom_cross}
835 ${ECHODIR} "===> ${_tool} (cross-tools)"; \
836 cd ${.CURDIR}/${_tool}; \
837 ${MAKE} DIRPRFX=${_tool}/ obj; \
838 ${MAKE} DIRPRFX=${_tool}/ depend; \
839 ${MAKE} DIRPRFX=${_tool}/ all; \
840 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
841.endfor
842 touch ${CTOOLSDEST}/.cross_done
843
844#
845# hierarchy - ensure that all the needed directories are present
846#
847hierarchy:
848 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
849
850#
851# libraries - build all libraries, and install them under ${DESTDIR}.
852#
853# The list of libraries with dependents (${_prebuild_libs}) and their
854# interdependencies (__L) are built automatically by the
855# ${.CURDIR}/tools/make_libdeps.sh script.
856#
857# .makeenv does not work when bootstrapping from 4.x, so we must be sure
858# to specify the correct CCVER or 'cc' will not exec the correct compiler.
859#
860libraries:
861 cd ${.CURDIR}; \
862 HOST_CCVER=${HOST_CCVER} CCVER=gcc41 \
863 ${MAKE} -f Makefile.inc1 _startup_libs41;
864.if !defined(NO_GCC44)
865 cd ${.CURDIR}; \
866 HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \
867 ${MAKE} -f Makefile.inc1 _startup_libs44;
868.endif
869 cd ${.CURDIR}; \
870 ${MAKE} -f Makefile.inc1 _startup_libs; \
871 ${MAKE} -f Makefile.inc1 _prebuild_libs; \
872 ${MAKE} -f Makefile.inc1 _generic_libs;
873 touch ${WORLDDEST}/.libraries_done
874
875# These dependencies are not automatically generated:
876#
877# gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
878# shared libraries for ELF. The target for _startup_libsXX is
879# specifically built using gccXX.
880#
881_startup_libs41= gnu/lib/gcc41/csu gnu/lib/gcc41/libgcc
882_startup_libs44= gnu/lib/gcc44/csu gnu/lib/gcc44/libgcc
883_startup_libs= lib/csu lib/libc lib/libc_rtld
884
885_prebuild_libs= lib/libbz2 lib/libz
886_prebuild_libs+= lib/libutil
887
888_generic_libs= gnu/lib
889
890_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
891 lib/libncurses/libncurses lib/libopie lib/libradius \
892 lib/libsbuf lib/libtacplus lib/libm \
893 lib/libpam lib/libypclnt lib/lib${THREAD_LIB}
894
895lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
896
897_generic_libs+= lib
898
899.if !defined(NO_CRYPT)
900.if !defined(NO_OPENSSL)
901_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
902.if !defined(NO_OPENSSH)
903_prebuild_libs+= secure/lib/libssh
904secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
905.endif
906.endif
907_generic_libs+= secure/lib
908.endif
909
910_generic_libs+= usr.bin/lex/lib
911
912.for _lib in ${_startup_libs41} ${_startup_libs44} \
913 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
914${_lib}__L: .PHONY
915.if exists(${.CURDIR}/${_lib})
916 ${ECHODIR} "===> ${_lib}"; \
917 cd ${.CURDIR}/${_lib}; \
918 ${MAKE} DIRPRFX=${_lib}/ depend; \
919 ${MAKE} DIRPRFX=${_lib}/ all; \
920 ${MAKE} DIRPRFX=${_lib}/ install
921.endif
922.endfor
923
924_startup_libs: ${_startup_libs:S/$/__L/}
925_startup_libs41: ${_startup_libs41:S/$/__L/}
926_startup_libs44: ${_startup_libs44:S/$/__L/}
927_prebuild_libs: ${_prebuild_libs:S/$/__L/}
928_generic_libs: ${_generic_libs:S/$/__L/}
929
930# library targets must be ordered because there are inter-library
931# races (e.g. generation of tconfig.h)
932#
933.ORDER: ${_startup_libs41:S/$/__L/}
934.ORDER: ${_startup_libs44:S/$/__L/}
935.ORDER: ${_startup_libs:S/$/__L/}
936.ORDER: ${_prebuild_libs:S/$/__L/}
937.ORDER: ${_generic_libs:S/$/__L/}
938
939.for __target in clean cleandepend cleandir obj depend includes
940.for entry in ${SUBDIR}
941${entry}.${__target}__D: .PHONY
942 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
943 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
944 edir=${entry}.${MACHINE_ARCH}; \
945 cd ${.CURDIR}/$${edir}; \
946 else \
947 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
948 edir=${entry}; \
949 cd ${.CURDIR}/$${edir}; \
950 fi; \
951 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
952.endfor
953par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
954.ORDER: ${SUBDIR:S/$/.${__target}__D/}
955.endfor
956.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
957
958# The wmake target is used by /usr/bin/wmake to run make in a
959# world build environment.
960#
961wmake:
962 @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}'
963
964wmakeenv:
965 @echo '${WMAKEENV} /bin/sh'
966
967bmake:
968 @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}'
969
970bmakeenv:
971 @echo '${BMAKEENV} /bin/sh'
972
973tmake:
974 @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}'
975
976tmakeenv:
977 @echo '${TMAKEENV} /bin/sh'
978
979xmake:
980 @echo '${XMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${XMAKE_ARGS}'
981
982xmakeenv:
983 @echo '${XMAKEENV} /bin/sh'
984
985.include <bsd.subdir.mk>
986