projects / dragonfly.git / blame_incremental
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (non-incremental) | history | HEAD
lib: Add liblzma to the build order
[dragonfly.git] / Makefile.inc1
... / ...
CommitLineData
1#
2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
3#
4# Build-time options are documented in make.conf(5).
5#
6# The intended user-driven targets are:
7#
8# buildworld - rebuild *everything*, including glue to help do upgrades
9# quickworld - skip the glue and do a depend+build on the meat
10# realquickworld - skip the glue and depend stages and just build the meat
11# crossworld - only build the glue (particularly the cross-build environment)
12# installworld- install everything built by "buildworld"
13# backupworld - copies /bin /sbin /usr/bin /usr/sbin /usr/lib /usr/libexec
14# to manual backup dir
15# rescue - create rescue image
16# restoreworld- installs binaries from manual backup dir to world
17# restoreworld-auto - installs binaries from auto-backup dir to world
18# most - build user commands, no libraries or include files
19# installmost - install user commands, no libraries or include files
20# backup-clean - delete backup from manual backup dir
21# backup-auto-clean - delete backup from auto-backup dir
22#
23# Standard targets (not defined here) are documented in the makefiles in
24# /usr/share/mk. These include:
25# obj depend all install clean cleandepend cleanobj
26
27# Put initial settings here.
28SUBDIR=
29
30# /libexec/ld-elf.so.2 needs to be installed first
31# Otherwise, install(1) beeing a dynamically linked binary will fail
32# during the first upgrade from a static to a dynamic world
33.if exists(${.CURDIR}/libexec)
34SUBDIR+= libexec
35.endif
36
37# We must do include and lib early so that the perl *.ph generation
38# works correctly as it uses the header files installed by this.
39.if exists(${.CURDIR}/include)
40SUBDIR+= include
41.endif
42.if exists(${.CURDIR}/lib)
43SUBDIR+= lib
44.endif
45# This exists simply to ensure that the obj dir hierarchy is
46# intact for nrelease, allowing the nrelease Makefile's to
47# reference ${.OBJDIR}.
48#
49.if exists(${.CURDIR}/nrelease)
50SUBDIR+= nrelease
51.endif
52
53.if exists(${.CURDIR}/bin)
54SUBDIR+= bin
55.endif
56.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
57SUBDIR+= games
58.endif
59.if exists(${.CURDIR}/gnu)
60SUBDIR+= gnu
61.endif
62.if exists(${.CURDIR}/sbin)
63SUBDIR+= sbin
64.endif
65.if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
66SUBDIR+= secure
67.endif
68.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
69SUBDIR+= share
70.endif
71.if exists(${.CURDIR}/sys)
72SUBDIR+= sys
73.endif
74.if exists(${.CURDIR}/usr.bin)
75SUBDIR+= usr.bin
76.endif
77.if exists(${.CURDIR}/usr.sbin)
78SUBDIR+= usr.sbin
79.endif
80
81.if exists(${.CURDIR}/etc)
82SUBDIR+= etc
83.endif
84
85# These are last, since it is nice to at least get the base system
86# rebuilt before you do them.
87.if defined(LOCAL_DIRS)
88.for _DIR in ${LOCAL_DIRS}
89.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
90SUBDIR+= ${_DIR}
91.endif
92.endfor
93.endif
94
95.if defined(SUBDIR_OVERRIDE)
96SUBDIR= ${SUBDIR_OVERRIDE}
97.endif
98
99.if defined(NOCLEANDIR)
100CLEANDIR= clean cleandepend
101.else
102CLEANDIR= cleandir
103.endif
104
105.if defined(NO_CLEAN)
106NOCLEAN= # defined
107.endif
108
109# Object directory base in primary make. Note that when we rerun make
110# from inside this file we change MAKEOBJDIRPREFIX to the appropriate
111# subdirectory because the rest of the build system needs it that way.
112# The original object directory base is saved in OBJTREE.
113#
114MAKEOBJDIRPREFIX?= /usr/obj
115OBJTREE?= ${MAKEOBJDIRPREFIX}
116
117# Used for stage installs and pathing
118#
119DESTDIRBASE:= ${OBJTREE}${.CURDIR}
120
121# Remove DESTDIR from MAKEFLAGS. It is present in the environment
122# anyhow, and we need to be able to override it for stage installs
123.MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*}
124
125# This section sets the tools used to build the world/kernel
126WORLD_CCVER?= gcc50
127WORLD_LDVER?= ld.bfd
128WORLD_BINUTILSVER?= binutils225
129
130# Set the backup parameters if they are not already defined
131#
132WORLD_BACKUP?= /var/backups/world_backup
133AUTO_BACKUP?= ${OBJTREE}/world_backup/${DESTDIR}
134
135TARGET_ARCH?= ${MACHINE_ARCH}
136.if ${TARGET_ARCH} == ${MACHINE_ARCH}
137TARGET?= ${MACHINE}
138.else
139TARGET?= ${TARGET_ARCH}
140.endif
141.if make(buildworld)
142BUILD_ARCH!= sysctl -n hw.machine_arch
143
144# temporary until everybody has converted to x86_64
145.if ${BUILD_ARCH} == "amd64"
146BUILD_ARCH= x86_64
147.endif
148
149.if ${MACHINE_ARCH} != ${BUILD_ARCH}
150.error To cross-build, set TARGET_ARCH.
151.endif
152.endif
153
154# XXX this is ugly and we need to come up with a nicer solution
155.if !defined(TARGET_PLATFORM)
156.if ${TARGET_ARCH} == "x86_64"
157TARGET_PLATFORM= pc64
158.else
159.error Unknown target architecture.
160.endif
161.endif
162
163THREAD_LIB?= thread_xu
164.if ${THREAD_LIB} == "c_r"
165.if defined(NO_LIBC_R)
166.error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
167.endif
168.endif
169
170# BTOOLS (Natively built) All non-cross-development tools that the
171# main build needs. This includes things like 'mkdir' and 'rm'.
172# We will not use the native system's exec path once we start
173# on WORLD. (bootstrap-tools and build-tools or BTOOLS)
174#
175# CTOOLS (Natively built) Cross development tools which are specific
176# to the target architecture.
177#
178# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and
179# CTOOLS.
180#
181# MACHINE_PLATFORM Platform Architecture we are building on
182# MACHINE Machine Architecture (usually the same as MACHINE_ARCH)
183# MACHINE_ARCH Cpu Architecture we are building on
184#
185# TARGET_PLATFORM Platform Architecture we are building for
186# TARGET Machine Architecture we are building for
187# TARGET_ARCH Cpu Architecture we are building for
188#
189BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH}
190CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
191WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH}
192
193# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
194# cross-tools stages to augment the existing command path to access newer
195# versions of certain utilities such as 'patch' that the cross-tools stage
196# might expect.
197#
198BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
199
200# The strict temporary command path contains all binaries required
201# by the buildworld system after the cross-tools stage.
202#
203STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games:/usr/local/bin:/usr/pkg/bin
204
205TMPDIR?= /tmp
206TMPPID!= echo $$$$
207
208#
209# Building a world goes through the following stages
210#
211# 1. bootstrap-tool stage [BMAKE]
212# This stage is responsible for creating programs that
213# are needed for backward compatibility reasons. They
214# are not built as cross-tools.
215# 2. build-tool stage [TMAKE]
216# This stage is responsible for creating the object
217# tree and building any tools that are needed during
218# the build process.
219# 3. cross-tool stage [XMAKE]
220# This stage is responsible for creating any tools that
221# are needed for cross-builds. A cross-compiler is one
222# of them.
223# 4. world stage [WMAKE]
224# This stage actually builds the world.
225# 5. install stage (optional) [IMAKE]
226# This stage installs a previously built world.
227#
228# In all cases we must carefully adjust the environment so the proper
229# tools and header files are used.
230#
231# NOTE: The M4 environment variable is used by the [f]lex binary to
232# override the location of the 'm4' binary. The override is
233# needed for certain buildworld version transitions, specifically
234# past a certain point in 3.3 because the older /usr/bin/m4 will
235# generate output that will blow up the newer [f]lex/yacc/bison
236# utilities.
237#
238
239# bootstrap-tool stage
240#
241BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
242 OBJTREE=${OBJTREE} \
243 DESTDIR=${BTOOLSDEST} \
244 PATH=${BTOOLSPATH}:${PATH} \
245 M4=${BTOOLSDEST}/usr/bin/m4 \
246 INSTALL="sh ${.CURDIR}/tools/install.sh"
247
248BMAKE= ${BMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
249 -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
250 -DNO_WERROR -DNO_NLS -DSYSBUILD
251
252# build-tool stage
253#
254TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
255 OBJTREE=${OBJTREE} \
256 DESTDIR= \
257 PATH=${BTOOLSPATH}:${PATH} \
258 M4=${BTOOLSDEST}/usr/bin/m4 \
259 INSTALL="sh ${.CURDIR}/tools/install.sh"
260
261TMAKE= ${TMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
262 -DNOSHARED -DSYSBUILD
263
264# cross-tool stage
265#
266# note: TOOLS_PREFIX points to the obj root holding the cross
267# compiler binaries, while USRDATA_PREFIX points to the obj root
268# holding the target environment (and also determines where cross-built
269# libraries, crt*.o, and include files are installed).
270#
271XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \
272 OBJTREE=${OBJTREE} \
273 DESTDIR=${CTOOLSDEST} \
274 _SHLIBDIRPREFIX=${CTOOLSDEST} \
275 INSTALL="sh ${.CURDIR}/tools/install.sh" \
276 TOOLS_PREFIX=${CTOOLSDEST} \
277 USRDATA_PREFIX=${WORLDDEST} \
278 SELECT_LINKER=${WORLD_LDVER} \
279 M4=${BTOOLSDEST}/usr/bin/m4 \
280 PATH=${BTOOLSPATH}:${PATH}
281
282XMAKE= ${XMAKEENV} make -f Makefile.inc1 -DNO_GDB \
283 -DBOOTSTRAPPING -DNOSHARED -DSYSBUILD
284
285# world stage, note the strict path and note that TOOLS_PREFIX is left
286# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
287# which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
288# for both binary and library paths, even though it is being compiled to
289# WORLDDEST. None of the programs in the world stage are ever actually
290# executed during the buildworld/installworld.
291#
292CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \
293 OBJTREE=${OBJTREE} \
294 MACHINE_ARCH=${TARGET_ARCH} \
295 MACHINE=${TARGET} \
296 MACHINE_PLATFORM=${TARGET_PLATFORM} \
297 OBJFORMAT_PATH=${CTOOLSDEST} \
298 HOST_CCVER=${HOST_CCVER} \
299 CCVER=${WORLD_CCVER} \
300 LDVER=${WORLD_LDVER} \
301 BINUTILSVER=${WORLD_BINUTILSVER}
302
303WMAKEENV= ${CROSSENV} \
304 DESTDIR=${WORLDDEST} \
305 _SHLIBDIRPREFIX=${WORLDDEST} \
306 INSTALL="sh ${.CURDIR}/tools/install.sh" \
307 M4=${BTOOLSDEST}/usr/bin/m4 \
308 PATH=${STRICTTMPPATH}
309
310WMAKE= ${WMAKEENV} make -f Makefile.inc1 -DSYSBUILD
311
312# install stage
313#
314IMAKEENV= ${CROSSENV} \
315 PATH=${STRICTTMPPATH}
316IMAKE= ${IMAKEENV} make -f Makefile.inc1 -DSYSBUILD
317
318# kernel stage
319#
320KMAKEENV= ${WMAKEENV}
321
322# buildworld
323#
324# Attempt to rebuild the entire system, with reasonable chance of
325# success, regardless of how old your existing system is.
326#
327_worldtmp: _cleantmp _mtreetmp
328.ORDER: _cleantmp _mtreetmp
329
330_cleantmp:
331 @echo
332 @echo "--------------------------------------------------------------"
333 @echo ">>> Rebuilding the temporary build tree"
334 @echo "--------------------------------------------------------------"
335.if !defined(NOCLEAN)
336 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
337.else
338 # XXX - These two can depend on any header file.
339 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
340 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
341.endif
342
343_mtreetmp:
344 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
345.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
346 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
347 -p ${_dir}/ > /dev/null
348 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
349 -p ${_dir}/usr > /dev/null
350.endfor
351 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
352 -p ${WORLDDEST}/usr/include > /dev/null
353 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
354
355_bootstrap-tools:
356 @echo
357 @echo "--------------------------------------------------------------"
358 @echo ">>> stage 1: bootstrap tools"
359 @echo "--------------------------------------------------------------"
360 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
361_cleanobj:
362 @echo
363 @echo "--------------------------------------------------------------"
364 @echo ">>> stage 2a: cleaning up the object tree"
365 @echo "--------------------------------------------------------------"
366 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
367_obj:
368 @echo
369 @echo "--------------------------------------------------------------"
370 @echo ">>> stage 2b: rebuilding the object tree"
371 @echo "--------------------------------------------------------------"
372 cd ${.CURDIR}; ${WMAKE} par-obj
373_build-tools:
374 @echo
375 @echo "--------------------------------------------------------------"
376 @echo ">>> stage 2c: build tools"
377 @echo "--------------------------------------------------------------"
378 cd ${.CURDIR}; ${TMAKE} build-tools
379_cross-tools:
380 @echo
381 @echo "--------------------------------------------------------------"
382 @echo ">>> stage 3: cross tools"
383 @echo "--------------------------------------------------------------"
384 cd ${.CURDIR}; ${XMAKE} cross-tools
385_includes:
386 @echo
387 @echo "--------------------------------------------------------------"
388 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
389 @echo "--------------------------------------------------------------"
390 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
391_libraries:
392 @echo
393 @echo "--------------------------------------------------------------"
394 @echo ">>> stage 4b: building libraries"
395 @echo "--------------------------------------------------------------"
396 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOMAN -DNOFSCHG libraries
397_depend:
398 @echo
399 @echo "--------------------------------------------------------------"
400 @echo ">>> stage 4c: make dependencies"
401 @echo "--------------------------------------------------------------"
402 cd ${.CURDIR}; ${WMAKE} par-depend
403everything:
404 @echo
405 @echo "--------------------------------------------------------------"
406 @echo ">>> stage 4d: building everything.."
407 @echo "--------------------------------------------------------------"
408 cd ${.CURDIR}; ${WMAKE} all
409_bwinit:
410 @echo "--------------------------------------------------------------"
411 @echo ">>> starting buildworld target"
412 @echo "--------------------------------------------------------------"
413_bwdone:
414 @echo "--------------------------------------------------------------"
415 @echo ">>> buildworld target complete"
416 @echo "--------------------------------------------------------------"
417_qwinit:
418 @echo "--------------------------------------------------------------"
419 @echo ">>> starting quickworld target"
420 @echo "--------------------------------------------------------------"
421_qwdone:
422 @echo "--------------------------------------------------------------"
423 @echo ">>> quickworld target complete"
424 @echo "--------------------------------------------------------------"
425_iwinit:
426 @echo "--------------------------------------------------------------"
427 @echo ">>> starting installworld target"
428 @echo "--------------------------------------------------------------"
429
430# note: buildworld no longer depends on _cleanobj because we rm -rf the
431# entire object tree and built the bootstrap tools in a different location.
432#
433# buildworld - build everything from scratch
434# quickworld - skip the bootstrap, build, and cross-build steps
435# realquickworld - skip the bootstrap, build, crossbuild, and depend step.
436#
437# note: we include _obj in realquickworld to prevent accidental creation
438# of files in /usr/src.
439
440WMAKE_TGTS=
441.if !defined(SUBDIR_OVERRIDE)
442WMAKE_TGTS+= _worldtmp _bootstrap-tools
443.endif
444WMAKE_TGTS+= _obj _build-tools
445.if !defined(SUBDIR_OVERRIDE)
446WMAKE_TGTS+= _cross-tools
447.endif
448WMAKE_TGTS+= _includes _libraries _depend everything
449
450buildworld: _bwinit ${WMAKE_TGTS} _bwdone
451
452quickworld: _qwinit _mtreetmp _obj _includes _libraries _depend everything _qwdone
453
454realquickworld: _qwinit _mtreetmp _obj _includes _libraries everything _qwdone
455
456crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
457
458.ORDER: _bwinit ${WMAKE_TGTS} _bwdone
459.ORDER: _obj _includes
460.ORDER: _qwinit _mtreetmp _obj
461.ORDER: installcheck backupworld-auto
462.ORDER: everything _qwdone
463
464#
465# installcheck
466#
467# Checks to be sure system is ready for installworld
468#
469installcheck: _iwinit
470 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
471 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
472 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
473.if !defined(OVERRIDE_CHECKS)
474.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
475 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; /usr/bin/false ; esac
476 @case `uname -r` in 1.*|2.*|3.0*|3.1*|3.2*|3.3*|3.4*|3.5*|3.6*) echo "Base is too old for a normal installworld, you need to use installworld-force" ; /usr/bin/false ; esac
477.endif
478.endif
479
480#
481# installworld
482#
483# Backs up the current world if ${AUTO_BACKUP} is writable.
484# Installs everything compiled by a 'buildworld'.
485#
486# Includes sleep/sync safety before running mkinitrd.
487
488installworld: installcheck
489 -@mkdir -p ${AUTO_BACKUP} > /dev/null 2>&1
490 @cd ${.CURDIR}; \
491 (touch ${AUTO_BACKUP}/.updating > /dev/null 2>&1 && \
492 ${IMAKE} backupworld-auto) || \
493 echo "Cannot write to ${AUTO_BACKUP} - world not backed up"
494
495 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
496 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
497 sync
498 @echo "--------------------------------------------------------------"
499 @echo ">>> installworld target complete"
500 @echo "--------------------------------------------------------------"
501 @echo "If things work as expected after a full reboot, consider updating the rescue"
502 @echo "image with 'make rescue'. Do not do it until after rebooting."
503
504installworld-force:
505 @echo "Doing a forced installworld. This will install to a temporary directory,"
506 @echo "then copy the main binaries and libraries with a static cpdup to ${DESTDIR}/"
507 @echo "and finally willl issue a normal installworld. Starting in 5 seconds.".
508 @echo "^C to abort."
509 sleep 1
510 rm -rf /usr/obj/temp > /dev/null 2>& 1 || chflags -R noschg /usr/obj/temp
511 rm -rf /usr/obj/temp
512 mkdir -p /usr/obj/temp/cpdup/bin
513 (cd ${.CURDIR}/bin/cpdup; make clean; make obj; make clean; make CFLAGS=-static all install DESTDIR=/usr/obj/temp/cpdup NOMAN=TRUE)
514 @echo "XXXXXXXXX Installing to temporary XXXXXXXXX"
515 @sleep 1
516 (cd ${.CURDIR}; ${MAKE} installworld DESTDIR=/usr/obj/temp > /dev/null 2>&1)
517 @echo "XXXXXXXXX Blasting binaries and libraries XXXXXXXXX"
518 @sleep 1
519 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/bin /bin
520 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/sbin /sbin
521 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/lib /lib
522 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/bin /usr/bin
523 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/sbin /usr/sbin
524 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/lib /usr/lib
525 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/libexec /libexec
526 /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/libexec /usr/libexec
527 @echo "XXXXXXXXX Doing final installworld XXXXXXXX"
528 sleep 5
529 (cd ${.CURDIR}; ${MAKE} installworld OVERRIDE_CHECKS=TRUE)
530 (cd ${.CURDIR}; ${MAKE} upgrade OVERRIDE_CHECKS=TRUE)
531
532# Create a rescue image. We no longer do this automatically for several
533# reasons, primarily that users have had serious issue with mismatched 'vn'
534# vs the kldload image that can crash the system. But also, the rescue image
535# is intended to be a rescue image, it is a bad idea to update it at the
536# same time the world is installed.
537#
538rescue:
539 mkinitrd -b ${DESTDIR}/boot
540
541#
542# reinstall
543#
544# If you have a build server, you can NFS mount the source and obj directories
545# and do a 'make reinstall' on the *client* to install new binaries from the
546# most recent server build.
547#
548reinstall:
549 @echo "--------------------------------------------------------------"
550 @echo ">>> Making hierarchy"
551 @echo "--------------------------------------------------------------"
552 cd ${.CURDIR}; make -f Makefile.inc1 hierarchy
553 @echo
554 @echo "--------------------------------------------------------------"
555 @echo ">>> Installing everything.."
556 @echo "--------------------------------------------------------------"
557 cd ${.CURDIR}; make -f Makefile.inc1 install
558
559#
560# buildkernel, nativekernel, quickkernel, and installkernel
561#
562# Which kernels to build and/or install is specified by setting
563# KERNCONF. If not defined an X86_64_GENERIC kernel is built/installed.
564# Only the existing (depending TARGET) config files are used
565# for building kernels and only the first of these is designated
566# as the one being installed.
567#
568# You can specify INSTALLSTRIPPED=1 if you wish the installed
569# kernel and modules to be stripped of its debug info (required
570# symbols are left intact). You can specify INSTALLSTRIPPEDMODULES
571# if you only want to strip the modules of their debug info. These
572# only apply if you have DEBUG=-g in your kernel config or make line.
573#
574# Note that we have to use TARGET instead of TARGET_ARCH when
575# we're in kernel-land. Since only TARGET_ARCH is (expected) to
576# be set to cross-build, we have to make sure TARGET is set
577# properly.
578
579.if !defined(KERNCONF) && defined(KERNEL)
580KERNCONF= ${KERNEL}
581KERNWARN= yes
582.else
583# XXX makeshift fix to build the right kernel for the (target) architecture
584# We should configure this in the platform files somehow
585.if ${TARGET_ARCH} == "x86_64"
586KERNCONF?= X86_64_GENERIC
587.endif
588.endif
589INSTKERNNAME?= kernel
590
591KRNLSRCDIR= ${.CURDIR}/sys
592KRNLCONFDIR= ${KRNLSRCDIR}/config
593KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
594KERNCONFDIR?= ${KRNLCONFDIR}
595
596BUILDKERNELS=
597INSTALLKERNEL=
598.for _kernel in ${KERNCONF}
599.if exists(${KERNCONFDIR}/${_kernel})
600BUILDKERNELS+= ${_kernel}
601.if empty(INSTALLKERNEL)
602INSTALLKERNEL= ${_kernel}
603.endif
604.endif
605.endfor
606
607# kernel version numbers survive rm -rf
608#
609.for _kernel in ${BUILDKERNELS}
610.if exists(${KRNLOBJDIR}/${_kernel}/version)
611KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
612.endif
613.endfor
614
615#
616# buildkernel
617#
618# Builds all kernels defined by BUILDKERNELS.
619#
620bk_tools:
621 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
622 echo "You must buildworld before buildkernel. If you wish"; \
623 echo "to build a kernel using native tools, config it manually"; \
624 echo "or use the nativekernel target if you are in a rush"; \
625 /usr/bin/false; \
626 fi
627
628maybe_bk_tools:
629.for _kernel in ${BUILDKERNELS}
630 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
631 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
632 echo "The kernel was build using buildworld tools which no" ; \
633 echo "longer appear to exist, quickkernel failed!" ; \
634 /usr/bin/false; \
635 fi; \
636 fi
637.endfor
638
639bk_build_list:
640.if empty(BUILDKERNELS)
641 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
642 @echo ">>> Did you move your kernel configs from i386/conf to config/?"
643 @false
644.endif
645
646bk_kernwarn:
647.if defined(KERNWARN)
648 @echo "--------------------------------------------------------------"
649 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
650 @echo "--------------------------------------------------------------"
651 @sleep 3
652.endif
653 @echo
654
655# The buildkernel target rebuilds the specified kernels from scratch
656# using the crossbuild tools generated by the last buildworld. It is
657# the safest (but also the most time consuming) way to build a new kernel.
658#
659buildkernel: bk_tools bk_build_list bk_kernwarn
660.for _kernel in ${BUILDKERNELS}
661 @echo "--------------------------------------------------------------"
662 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
663 @echo "--------------------------------------------------------------"
664 @echo "===> ${_kernel}"
665.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
666 rm -rf ${KRNLOBJDIR}/${_kernel}
667.else
668 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
669 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
670 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
671.endif
672 mkdir -p ${KRNLOBJDIR}
673.if !defined(NO_KERNELCONFIG)
674 cd ${KRNLCONFDIR}; \
675 PATH=${STRICTTMPPATH} \
676 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
677 ${KERNCONFDIR}/${_kernel}
678.endif
679.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
680 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
681.endif
682 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
683.if !defined(NO_KERNELDEPEND)
684 cd ${KRNLOBJDIR}/${_kernel}; \
685 ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
686.endif
687 cd ${KRNLOBJDIR}/${_kernel}; \
688 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
689 @echo "--------------------------------------------------------------"
690 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
691 @echo "--------------------------------------------------------------"
692.endfor
693
694# The nativekernel target rebuilds the specified kernels from scratch
695# using the system's standard compiler rather than using the crossbuild
696# tools generated by the last buildworld. This is fairly safe if your
697# system is reasonable up-to-date.
698#
699nativekernel: bk_build_list bk_kernwarn
700.for _kernel in ${BUILDKERNELS}
701 @echo "--------------------------------------------------------------"
702 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
703 @echo "--------------------------------------------------------------"
704 @echo "===> ${_kernel}"
705.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
706 rm -rf ${KRNLOBJDIR}/${_kernel}
707.else
708 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
709 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
710 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
711.endif
712 mkdir -p ${KRNLOBJDIR}
713.if !defined(NO_KERNELCONFIG)
714 cd ${KRNLCONFDIR}; \
715 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
716 ${KERNCONFDIR}/${_kernel}
717.endif
718.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
719 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
720.endif
721 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
722 cd ${KRNLOBJDIR}/${_kernel}; \
723 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
724 make -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
725.if !defined(NO_KERNELDEPEND)
726 cd ${KRNLOBJDIR}/${_kernel}; \
727 make KERNEL=${INSTKERNNAME} depend
728.endif
729 cd ${KRNLOBJDIR}/${_kernel}; \
730 make KERNEL=${INSTKERNNAME} all
731 @echo "--------------------------------------------------------------"
732 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
733 @echo "--------------------------------------------------------------"
734.endfor
735
736# The quickkernel target rebuilds the specified kernels as quickly
737# as possible. It will use the native tools or the buildworld cross tools
738# based on whether the kernel was originally generated via buildkernel or
739# nativekernel. Config is rerun but the object hierarchy is not rebuilt,
740# nor is the make depend step run.
741#
742quickkernel: maybe_bk_tools bk_build_list bk_kernwarn
743.for _kernel in ${BUILDKERNELS}
744 @echo "--------------------------------------------------------------"
745 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
746 @echo "--------------------------------------------------------------"
747 @echo "===> ${_kernel}"
748.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
749.if !defined(NO_KERNELCONFIG)
750 cd ${KRNLCONFDIR}; \
751 PATH=${STRICTTMPPATH} \
752 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
753 ${KERNCONFDIR}/${_kernel}
754.endif
755 cd ${KRNLOBJDIR}/${_kernel}; \
756 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
757.else
758.if !defined(NO_KERNELCONFIG)
759 cd ${KRNLCONFDIR}; \
760 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
761 ${KERNCONFDIR}/${_kernel}
762.endif
763 cd ${KRNLOBJDIR}/${_kernel}; \
764 make KERNEL=${INSTKERNNAME} all
765.endif
766 @echo "--------------------------------------------------------------"
767 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
768 @echo "--------------------------------------------------------------"
769.endfor
770
771
772# installkernel
773#
774# Install the kernel defined by INSTALLKERNEL
775#
776installkernel reinstallkernel:
777 @echo "--------------------------------------------------------------"
778 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
779 @echo "--------------------------------------------------------------"
780.if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
781 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
782 ${IMAKEENV} make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
783.else
784 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
785 make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
786.endif
787 @echo "--------------------------------------------------------------"
788 @echo ">>> Kernel install for ${INSTALLKERNEL} completed on `LC_ALL=C date`"
789 @echo "--------------------------------------------------------------"
790
791#
792# most
793#
794# Build most of the user binaries on the existing system libs and includes.
795#
796most:
797 @echo "--------------------------------------------------------------"
798 @echo ">>> Building programs only"
799 @echo "--------------------------------------------------------------"
800.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
801 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ all
802.endfor
803
804#
805# installmost
806#
807# Install the binaries built by the 'most' target. This does not include
808# libraries or include files.
809#
810installmost:
811 @echo "--------------------------------------------------------------"
812 @echo ">>> Installing programs only"
813 @echo "--------------------------------------------------------------"
814.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
815 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ install
816.endfor
817
818#
819# ------------------------------------------------------------------------
820#
821# From here onwards are utility targets used by the 'make world' and
822# related targets. If your 'world' breaks, you may like to try to fix
823# the problem and manually run the following targets to attempt to
824# complete the build. Beware, this is *not* guaranteed to work, you
825# need to have a pretty good grip on the current state of the system
826# to attempt to manually finish it. If in doubt, 'make world' again.
827#
828
829# bootstrap-tools: Build all tools required to build all tools. Note that
830# order is important in a number of cases and also note that the bootstrap
831# and build tools stages have access to earlier binaries they themselves
832# had generated.
833#
834# patch: older patch's do not have -i. This program must be built
835# first so other bootstrap tools that need to apply patches
836# can use it.
837# [x]install: dependancies on various new install features
838# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
839# envs are not compatible with older objformat binaries.
840#
841.if exists(${.CURDIR}/games) && !defined(NO_GAMES)
842_strfile= games/fortune/strfile
843.endif
844
845# BSTRAPDIRS1 - must be built in strict order, no parallelism
846#
847# order is very important. yacc before m4 before flex. flex exec's m4,
848# m4's parser file needs the latest byacc (insanity!).
849#
850BSTRAPDIRS1= ${_strfile} \
851 usr.bin/patch \
852 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \
853 bin/test bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
854 bin/hostname bin/kill \
855 usr.bin/yacc usr.bin/m4 usr.bin/localedef \
856 usr.bin/uudecode usr.bin/xinstall \
857 usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \
858 usr.bin/find usr.bin/flex
859
860# BSTRAPDIRS2 - may built in parallel
861#
862BSTRAPDIRS2= \
863 usr.bin/sed usr.bin/uname usr.bin/touch \
864 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
865 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
866 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
867 usr.bin/uuencode usr.bin/hexdump \
868 usr.bin/cap_mkdb usr.bin/true usr.bin/false \
869 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
870 usr.bin/tail usr.bin/unifdef usr.bin/tic \
871 usr.sbin/chown usr.sbin/mtree usr.sbin/config \
872 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
873 gnu/usr.bin/grep usr.bin/sort usr.bin/gzip usr.bin/bzip2 \
874 usr.bin/mkcsmapper usr.bin/mkesdb usr.bin/crunch
875
876bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
877 touch ${BTOOLSDEST}/.bootstrap_done
878
879bootstrap-tools-before:
880 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
881
882bootstrap-tools-targets1: ${BSTRAPDIRS1:S/^/bstrap-/}
883
884bootstrap-tools-targets2: ${BSTRAPDIRS2:S/^/bstrap-/}
885
886.ORDER: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
887
888.ORDER: ${BSTRAPDIRS1:S/^/bstrap-/}
889
890.for _tool in ${BSTRAPDIRS1} ${BSTRAPDIRS2}
891bstrap-${_tool}!
892 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
893 cd ${.CURDIR}/${_tool}; \
894 make DIRPRFX=${_tool}/ obj; \
895 make DIRPRFX=${_tool}/ depend; \
896 make DIRPRFX=${_tool}/ all; \
897 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
898.endfor
899
900# build-tools: Build special purpose build tools.
901#
902# XXX we may be able to remove or consolidate this into bootstrap-tools
903# now that we have the native helper (.nx/.no) infrastructure.
904#
905.if exists(${.CURDIR}/share) && !defined(NO_SHARE)
906_share= share/syscons/scrnmaps
907.endif
908
909_gcc_common_cross= lib/libz gnu/usr.bin/gmp gnu/usr.bin/mpfr gnu/usr.bin/mpc
910_gcc50_cross= gnu/usr.bin/cc50
911_gcc50_tools= gnu/usr.bin/cc50/cc_prep gnu/usr.bin/cc50/cc_tools
912.if !defined(NO_ALTCOMPILER)
913_gcc47_cross= gnu/usr.bin/cc47
914_gcc47_tools= gnu/usr.bin/cc47/cc_prep gnu/usr.bin/cc47/cc_tools
915.endif
916_custom_cross= libexec/customcc
917_binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
918
919BTOOLSDIRS= ${_gcc47_tools} ${_gcc50_tools} ${_share}
920
921build-tools: build-tools-targets
922 touch ${BTOOLSDEST}/.build_done
923
924build-tools-targets: ${BTOOLSDIRS:S/^/btools-/}
925
926.ORDER: ${_gcc47_tools:S/^/btools-/}
927.ORDER: ${_gcc50_tools:S/^/btools-/}
928
929.for _tool in ${BTOOLSDIRS}
930btools-${_tool}!
931 ${ECHODIR} "===> ${_tool} (build-tools)"; \
932 cd ${.CURDIR}/${_tool}; \
933 make DIRPRFX=${_tool}/ obj; \
934 make DIRPRFX=${_tool}/ depend; \
935 make DIRPRFX=${_tool}/ all; \
936 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
937.endfor
938
939#
940# cross-tools: Build cross-building tools
941#
942.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
943_btxld= usr.sbin/btxld
944.endif
945
946CTOOLSDIRS= ${_btxld} ${_binutils} \
947 usr.bin/objformat usr.bin/crunch/crunchide \
948 ${_gcc_common_cross} \
949 ${_gcc47_cross} ${_gcc50_cross} ${_custom_cross}
950
951cross-tools: cross-tools-targets
952 touch ${CTOOLSDEST}/.cross_done
953
954cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/}
955
956.for _tool in ${CTOOLSDIRS}
957ctools-${_tool}!
958 ${ECHODIR} "===> ${_tool} (cross-tools)"; \
959 cd ${.CURDIR}/${_tool}; \
960 make DIRPRFX=${_tool}/ obj; \
961 make DIRPRFX=${_tool}/ depend; \
962 make DIRPRFX=${_tool}/ all; \
963 make DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
964.endfor
965
966#
967# hierarchy - ensure that all the needed directories are present
968#
969hierarchy:
970 cd ${.CURDIR}/etc; make distrib-dirs
971
972#
973# libraries - build all libraries, and install them under ${DESTDIR}.
974#
975# The list of libraries with dependents (${_prebuild_libs}) and their
976# interdependencies (__L) are built automatically by the
977# ${.CURDIR}/tools/make_libdeps.sh script.
978#
979# .makeenv does not work when bootstrapping from 4.x, so we must be sure
980# to specify the correct CCVER or 'cc' will not exec the correct compiler.
981#
982libraries:
983 cd ${.CURDIR}; \
984 HOST_CCVER=${HOST_CCVER} CCVER=gcc50 \
985 make -f Makefile.inc1 _startup_libs50 -DSYSBUILD;
986.if !defined(NO_ALTCOMPILER)
987 cd ${.CURDIR}; \
988 HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \
989 make -f Makefile.inc1 _startup_libs47 -DSYSBUILD;
990.endif
991 cd ${.CURDIR}; \
992 make -f Makefile.inc1 _startup_libs -DSYSBUILD; \
993 make -f Makefile.inc1 _prebuild_libs -DSYSBUILD; \
994 make -f Makefile.inc1 _generic_libs -DSYSBUILD;
995 touch ${WORLDDEST}/.libraries_done
996
997# These dependencies are not automatically generated:
998#
999# gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
1000# shared libraries for ELF. The target for _startup_libsXX is
1001# specifically built using gccXX.
1002#
1003_startup_libs47= gnu/usr.bin/cc47/cc_prep \
1004 gnu/usr.bin/cc47/cc_tools \
1005 gnu/lib/gcc47/csu \
1006 gnu/lib/gcc47/libgcc \
1007 gnu/lib/gcc47/libgcc_eh \
1008 gnu/lib/gcc47/libgcc_pic
1009_startup_libs50= gnu/usr.bin/cc50/cc_prep \
1010 gnu/usr.bin/cc50/cc_tools \
1011 gnu/lib/gcc50/csu \
1012 gnu/lib/gcc50/libgcc \
1013 gnu/lib/gcc50/libgcc_eh \
1014 gnu/lib/gcc50/libgcc_pic
1015_startup_libs= lib/csu lib/libc lib/libc_rtld
1016
1017_prebuild_libs= lib/libbz2 lib/liblzma lib/libz
1018_prebuild_libs+= lib/libutil
1019
1020_prebuild_libs+= lib/libpcap
1021
1022_generic_libs= gnu/lib
1023
1024_prebuild_libs+= lib/libcrypt lib/libmd \
1025 lib/libncurses/libncurses lib/libopie
1026
1027lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
1028
1029_generic_libs+= lib
1030
1031.if !defined(NO_CRYPT)
1032.if !defined(NO_OPENSSL)
1033_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
1034.if !defined(NO_OPENSSH)
1035_prebuild_libs+= secure/lib/libssh
1036secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
1037.endif
1038.endif
1039_generic_libs+= secure/lib
1040.endif
1041
1042_prebuild_libs+= lib/libradius lib/libsbuf lib/libtacplus lib/libm \
1043 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} \
1044 lib/libpthread lib/libprop lib/libdevattr
1045
1046_generic_libs+= usr.bin/flex/lib
1047
1048.for _lib in ${_startup_libs47} ${_startup_libs50} \
1049 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
1050${_lib}__L: .PHONY
1051.if exists(${.CURDIR}/${_lib})
1052 ${ECHODIR} "===> ${_lib}"; \
1053 cd ${.CURDIR}/${_lib}; \
1054 make DIRPRFX=${_lib}/ depend; \
1055 make DIRPRFX=${_lib}/ all; \
1056 make DIRPRFX=${_lib}/ install
1057.endif
1058.endfor
1059
1060_startup_libs: ${_startup_libs:S/$/__L/}
1061_startup_libs47: ${_startup_libs47:S/$/__L/}
1062_startup_libs50: ${_startup_libs50:S/$/__L/}
1063_prebuild_libs: ${_prebuild_libs:S/$/__L/}
1064_generic_libs: ${_generic_libs:S/$/__L/}
1065
1066# library targets must be ordered because there are inter-library
1067# races (e.g. generation of tconfig.h)
1068#
1069.ORDER: ${_startup_libs47:S/$/__L/}
1070.ORDER: ${_startup_libs50:S/$/__L/}
1071.ORDER: ${_startup_libs:S/$/__L/}
1072.ORDER: ${_prebuild_libs:S/$/__L/}
1073.ORDER: ${_generic_libs:S/$/__L/}
1074
1075.for __target in clean cleandepend cleandir obj depend includes
1076.for entry in ${SUBDIR}
1077${entry}.${__target}__D: .PHONY
1078 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
1079 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
1080 edir=${entry}.${MACHINE_ARCH}; \
1081 cd ${.CURDIR}/$${edir}; \
1082 else \
1083 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
1084 edir=${entry}; \
1085 cd ${.CURDIR}/$${edir}; \
1086 fi; \
1087 make ${__target} DIRPRFX=${DIRPRFX}$${edir}/
1088.endfor
1089par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
1090.ORDER: ${SUBDIR:S/$/.${__target}__D/}
1091.endfor
1092.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
1093
1094# The wmake target is used by /usr/bin/wmake to run make in a
1095# world build environment.
1096#
1097wmake:
1098 @echo '${WMAKEENV} make ${WMAKE_ARGS} -DSYSBUILD'
1099
1100wmakeenv:
1101 @echo '${WMAKEENV} /bin/sh'
1102
1103bmake:
1104 @echo '${BMAKEENV} make ${BMAKE_ARGS} -DSYSBUILD'
1105
1106bmakeenv:
1107 @echo '${BMAKEENV} /bin/sh'
1108
1109tmake:
1110 @echo '${TMAKEENV} make ${TMAKE_ARGS} -DSYSBUILD'
1111
1112tmakeenv:
1113 @echo '${TMAKEENV} /bin/sh'
1114
1115xmake:
1116 @echo '${XMAKEENV} make ${XMAKE_ARGS} -DSYSBUILD'
1117
1118xmakeenv:
1119 @echo '${XMAKEENV} /bin/sh'
1120
1121backupworld: backup-clean
1122 @mkdir -p ${WORLD_BACKUP}
1123.if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1124 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1125 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1126 tar -czf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1127 --options gzip:compression-level=1 \
1128 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1129.endif
1130
1131backupworld-auto:
1132.if !defined(NO_BACKUP)
1133 rm -f ${AUTO_BACKUP}/binaries.tar.gz
1134 @mkdir -p ${AUTO_BACKUP}
1135.if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1136 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1137 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1138 /usr/bin/tar -czf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1139 --options gzip:compression-level=1 \
1140 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1141.endif
1142.endif
1143
1144backup-auto-clean:
1145 rm -f ${AUTO_BACKUP}/binaries.tar.gz
1146
1147backup-clean:
1148 rm -f ${WORLD_BACKUP}/binaries.tar.gz
1149
1150restoreworld:
1151.if !exists(${WORLD_BACKUP}/binaries.tar.gz)
1152 @echo "There does not seem to be a valid archive present."
1153.else
1154 @echo "Restoring system binaries from manual backup archive..."
1155 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1156 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1157 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1158 tar -xzf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1159.endif
1160
1161restoreworld-auto:
1162.if !exists(${AUTO_BACKUP}/binaries.tar.gz)
1163 @echo "There does not seem to be a valid archive present."
1164.else
1165 @echo "Restoring system binaries from auto-backup archive..."
1166 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1167 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1168 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1169 tar -xzf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1170.endif
1171
1172# Take advantage of bmake error response
1173#
1174MAKE_PRINT_VAR_ON_ERROR= \
1175 .CURDIR \
1176 .OBJDIR \
1177 LD_LIBRARY_PATH \
1178 MACHINE_ARCH \
1179 MACHINE \
1180 MAKEFILE \
1181 .TARGETS \
1182 .ERROR_TARGET \
1183 .MAKE.LEVEL
1184
1185.include <bsd.subdir.mk>
DragonFly Project Source