| 1 | #!/bin/sh |
| 2 | # |
| 3 | |
| 4 | # This is rc.conf - a file full of useful variables that you can set |
| 5 | # to change the default startup behavior of your system. You should |
| 6 | # not edit this file! Put any overrides into one of the ${rc_conf_files} |
| 7 | # instead and you will be able to update these defaults later without |
| 8 | # spamming your local configuration information. |
| 9 | # |
| 10 | # The ${rc_conf_files} files should only contain values which override |
| 11 | # values set in this file. This eases the upgrade path when defaults |
| 12 | # are changed and new features are added. |
| 13 | # |
| 14 | # All arguments must be in double or single quotes. |
| 15 | # |
| 16 | # $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $ |
| 17 | # $DragonFly: src/etc/defaults/rc.conf,v 1.52 2008/10/03 00:26:21 hasso Exp $ |
| 18 | |
| 19 | ############################################################## |
| 20 | ### Important initial Boot-time options #################### |
| 21 | ############################################################## |
| 22 | |
| 23 | rc_debug="NO" # Set to YES to enable debugging output from rc.d |
| 24 | rc_info="YES" # Enables display of informational messages at boot. |
| 25 | rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown |
| 26 | swapfile="NO" # Set to name of swapfile if aux swapfile desired. |
| 27 | apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). |
| 28 | apmd_enable="NO" # Run apmd to handle APM event from userland. |
| 29 | apmd_flags="" # Flags to apmd (if enabled). |
| 30 | battd_enable="NO" # Set to YES to have battd alert on 10% battery power remaining. |
| 31 | battd_flags="" # Flags to battd (if enabled). |
| 32 | sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes. |
| 33 | sensorsd_flags="" # additional flags for sensorsd(8). |
| 34 | pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). |
| 35 | pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether |
| 36 | removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. |
| 37 | local_startup="/usr/pkg/etc/rc.d /usr/local/etc/rc.d /usr/X11R6/etc/rc.d" |
| 38 | # startup script dirs. |
| 39 | script_name_sep=" " # Change if your startup scripts' names contain spaces |
| 40 | rc_conf_files="/etc/rc.conf /etc/rc.conf.local" |
| 41 | fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. |
| 42 | netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. |
| 43 | extra_netfs_types="NO" # List of network extra filesystem types for delayed |
| 44 | # mount at startup (or NO). |
| 45 | devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf" |
| 46 | # Config files for devfs(5) |
| 47 | |
| 48 | ############################################################## |
| 49 | ### Network configuration sub-section ###################### |
| 50 | ############################################################## |
| 51 | |
| 52 | ### Basic network and firewall/security options: ### |
| 53 | # |
| 54 | # see 'man firewall' for an explanation of the default firewall rules |
| 55 | # |
| 56 | hostname="" # Set this! |
| 57 | nisdomainname="NO" # Set to NIS domain if using NIS (or NO). |
| 58 | dhclient_program="/sbin/dhclient" # Path to dhcp client program. |
| 59 | dhclient_flags="" # Additional flags to pass to dhcp client. |
| 60 | firewall_enable="NO" # Set to YES to enable firewall functionality |
| 61 | firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall |
| 62 | firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) |
| 63 | firewall_trusted_nets="192.168.0.0/16" # list of trusted nets |
| 64 | firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0" |
| 65 | firewall_allowed_icmp_types="0 3 8 11 12 13 14" |
| 66 | firewall_open_tcp_ports="22 25 53 80 113 443" |
| 67 | firewall_open_udp_ports="53" |
| 68 | firewall_quiet="NO" # Set to YES to suppress rule display |
| 69 | firewall_logging="NO" # Set to YES to enable events logging |
| 70 | firewall_flags="" # Flags passed to ipfw when type is a file |
| 71 | ip_portrange_first="NO" # Set first dynamically allocated port |
| 72 | ip_portrange_last="NO" # Set last dynamically allocated port |
| 73 | ipsec_enable="NO" # Set to YES to run setkey on ipsec_file |
| 74 | ipsec_file="/etc/ipsec.conf" # Name of config file for setkey |
| 75 | natd_program="/sbin/natd" # path to natd, if you want a different one. |
| 76 | natd_enable="NO" # Enable natd (if firewall_enable == YES). |
| 77 | natd_interface="" # Public interface or IPaddress to use. |
| 78 | natd_flags="" # Additional flags for natd. |
| 79 | ipfilter_enable="NO" # Set to YES to enable ipfilter functionality |
| 80 | ipfilter_program="/sbin/ipf" # where the ipfilter program lives |
| 81 | ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see |
| 82 | # /usr/src/contrib/ipfilter/rules for examples |
| 83 | ipfilter_flags="" # additional flags for ipfilter |
| 84 | ipnat_enable="NO" # Set to YES to enable ipnat functionality |
| 85 | ipnat_program="/sbin/ipnat" # where the ipnat program lives |
| 86 | ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat |
| 87 | ipnat_flags="" # additional flags for ipnat |
| 88 | ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat |
| 89 | ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives |
| 90 | ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" |
| 91 | ipfs_enable="NO" # Set to YES to enable saving and restoring |
| 92 | # of state tables at shutdown and boot |
| 93 | ipfs_program="/sbin/ipfs" # where the ipfs program lives |
| 94 | ipfs_flags="" # additional flags for ipfs |
| 95 | pf_enable="NO" # Set to YES to enable packet filter (pf) |
| 96 | pf_rules="/etc/pf.conf" # rules definition file for pf |
| 97 | pf_program="/usr/sbin/pfctl" # where the pfctl program lives |
| 98 | pf_flags="" # additional flags for pfctl |
| 99 | pflog_enable="NO" # Set to YES to enable packet filter logging |
| 100 | pflog_logfile="/var/log/pflog" # where pflogd should store the logfile |
| 101 | pflog_program="/usr/sbin/pflogd" # where the pflogd program lives |
| 102 | pflog_flags="" # additional flags for pflogd |
| 103 | tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. |
| 104 | log_in_vain="0" # >=1 to log connects to ports w/o listeners. |
| 105 | tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). |
| 106 | # For the following option you need to have TCP_DROP_SYNFIN set in your |
| 107 | # kernel. Please refer to LINT and NOTES for details. |
| 108 | tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN |
| 109 | # NOTE: this violates the TCP specification |
| 110 | icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets |
| 111 | icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets |
| 112 | network_interfaces="auto" # List of network interfaces (or "auto"). |
| 113 | cloned_interfaces="" # List of cloned network interfaces to create. |
| 114 | #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. |
| 115 | ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. |
| 116 | #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. |
| 117 | #ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. |
| 118 | #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. |
| 119 | # |
| 120 | # If you have any sppp(4) interfaces above, you might also want to set |
| 121 | # the following parameters. Refer to spppcontrol(8) for their meaning. |
| 122 | sppp_interfaces="" # List of sppp interfaces. |
| 123 | #sppp_interfaces="isp0" # example: sppp over ISDN |
| 124 | #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" |
| 125 | gif_interfaces="NO" # List of GIF tunnels (or "NO"). |
| 126 | #gif_interfaces="gif0 gif1" # Examples typically for a router. |
| 127 | # Choose correct tunnel addrs. |
| 128 | #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. |
| 129 | #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. |
| 130 | |
| 131 | # User ppp configuration. |
| 132 | ppp_enable="NO" # Start user-ppp (or NO). |
| 133 | ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". |
| 134 | # For details see man page for ppp(8). Default is auto. |
| 135 | ppp_nat="YES" # Use PPP's internal network address translation or NO. |
| 136 | ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. |
| 137 | ppp_user="root" # Which user to run ppp as |
| 138 | |
| 139 | ### Network daemon (miscellaneous) ### |
| 140 | hostapd_enable="NO" # Run hostap daemon. |
| 141 | syslogd_enable="YES" # Run syslog daemon (or NO). |
| 142 | syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. |
| 143 | #syslogd_flags="-s" # Flags to syslogd (if enabled). |
| 144 | syslogd_flags="-ss" # Syslogd flags to not bind an inet socket |
| 145 | inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). |
| 146 | inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. |
| 147 | inetd_flags="-wW" # Optional flags to inetd |
| 148 | # |
| 149 | # named. It may be possible to run named in a sandbox, man security for |
| 150 | # details. Note: when named_chrootdir is specified, RCNG automatically |
| 151 | # adds '-u bind'. |
| 152 | # |
| 153 | named_enable="NO" # Run named, the DNS server (or NO). |
| 154 | named_program="/usr/sbin/named" # path to named, if you want a different one. |
| 155 | named_pidfile="/var/run/named.pid" # Pid file |
| 156 | named_chrootdir="/etc/namedb" # Chroot directory (or "" not to auto-chroot it) |
| 157 | |
| 158 | rwhod_enable="NO" # Run the rwho daemon (or NO). |
| 159 | rwhod_flags="" # Flags for rwhod |
| 160 | rarpd_enable="NO" # Run rarpd (or NO). |
| 161 | rarpd_flags="" # Flags to rarpd. |
| 162 | bootparamd_enable="NO" # Run bootparamd (or NO). |
| 163 | bootparamd_flags="" # Flags to bootparamd |
| 164 | pppoed_enable="NO" # Run the PPP over Ethernet daemon. |
| 165 | pppoed_provider="*" # Provider and ppp(8) config file entry. |
| 166 | pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). |
| 167 | pppoed_interface="fxp0" # The interface that pppoed runs on. |
| 168 | sshd_enable="NO" # Enable sshd |
| 169 | sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. |
| 170 | sshd_flags="" # Additional flags for sshd. |
| 171 | |
| 172 | ftpd_enable="NO" # Run stand-alone ftp daemon (or NO). |
| 173 | ftpd_flags="" # Flags for ftpd, -D added implicitly. |
| 174 | |
| 175 | ### Network File System (NFS): ### |
| 176 | ### Server-side options also need rpcbind_enable="YES" ### |
| 177 | ### |
| 178 | ### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If |
| 179 | ### the mtime matches the data cache is left intact. |
| 180 | ### |
| 181 | amd_enable="NO" # Run amd service with $amd_flags (or NO). |
| 182 | amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" |
| 183 | amd_map_program="NO" # Can be set to "ypcat -k amd.master" |
| 184 | nfs_client_enable="NO" # This host is an NFS client (or NO). |
| 185 | nfs_access_cache="5" # Client attribute cache timeout in seconds |
| 186 | #nfs_neg_cache="3" # Client attribute negative hit cache timeout |
| 187 | nfs_server_enable="NO" # This host is an NFS server (or NO). |
| 188 | nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). |
| 189 | mountd_enable="NO" # Run mountd (or NO). |
| 190 | mountd_flags="-r" # Flags to mountd (if NFS server enabled). |
| 191 | weak_mountd_authentication="NO" # Allow non-root mount requests to be served. |
| 192 | nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). |
| 193 | nfs_bufpackets="" # bufspace (in packets) for client |
| 194 | rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. |
| 195 | rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). |
| 196 | rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. |
| 197 | rpc_statd_flags="" # Flags to rpc.statd (if enabled). |
| 198 | rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown |
| 199 | rpcbind_enable="NO" # Run the portmapper service (YES/NO). |
| 200 | rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. |
| 201 | rpcbind_flags="" # Flags to rpcbind (if enabled). |
| 202 | rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). |
| 203 | keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). |
| 204 | keyserv_flags="" # Flags to keyserv (if enabled). |
| 205 | |
| 206 | ### Network Time Services options: ### |
| 207 | timed_enable="NO" # Run the time daemon (or NO). |
| 208 | timed_flags="" # Flags to timed (if enabled). |
| 209 | dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO). |
| 210 | dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one. |
| 211 | dntpd_flags="" # Flags to dntpd (if enabled) also server name(s) |
| 212 | |
| 213 | # Bluetooth deamons and options: |
| 214 | btconfig_enable="NO" # Configure Bluetooth devices (or NO). |
| 215 | btconfig_devices="" # List of Bluetooth devices (or empty for all). |
| 216 | #btconfig_<device>="" # Parameters to pass to <device>. |
| 217 | btconfig_args="" # Parameters to pass to all devices. |
| 218 | sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO). |
| 219 | sdpd_flags="" # Flags to sdpd (if enabled). |
| 220 | bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO). |
| 221 | bthcid_flags="" # Flags to bthcid (if enabled). |
| 222 | |
| 223 | # Network Information Services (NIS) options: All need rpcbind_enable="YES" ### |
| 224 | nis_client_enable="NO" # We're an NIS client (or NO). |
| 225 | nis_client_flags="" # Flags to ypbind (if enabled). |
| 226 | nis_ypset_enable="NO" # Run ypset at boot time (or NO). |
| 227 | nis_ypset_flags="" # Flags to ypset (if enabled). |
| 228 | nis_server_enable="NO" # We're an NIS server (or NO). |
| 229 | nis_server_flags="" # Flags to ypserv (if enabled). |
| 230 | nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). |
| 231 | nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). |
| 232 | nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). |
| 233 | nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). |
| 234 | |
| 235 | ### Network routing options: ### |
| 236 | defaultrouter="NO" # Set to default gateway (or NO). |
| 237 | static_routes="" # Set to static route list (or leave empty). |
| 238 | gateway_enable="NO" # Set to YES if this host will be a gateway. |
| 239 | router_enable="NO" # Set to YES to enable a routing daemon. |
| 240 | router_program="/sbin/routed" # Name of routing daemon to use if enabled. |
| 241 | router_flags="-q" # Flags for routing daemon. |
| 242 | mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). |
| 243 | mrouted_flags="" # Flags for multicast routing daemon. |
| 244 | ipxgateway_enable="NO" # Set to YES to enable IPX routing. |
| 245 | ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. |
| 246 | ipxrouted_flags="" # Flags for IPX routing daemon. |
| 247 | arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. |
| 248 | forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") |
| 249 | accept_sourceroute="NO" # accept source routed packets to us |
| 250 | |
| 251 | ### ATM interface options: ### |
| 252 | atm_enable="NO" # Configure ATM interfaces (or NO). |
| 253 | #atm_netif_hea0="atm 1" # Network interfaces for physical interface. |
| 254 | #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. |
| 255 | #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). |
| 256 | #atm_macaddr_hea0="NO" # Override physical MAC address (or NO). |
| 257 | #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). |
| 258 | #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). |
| 259 | atm_arps="" # Set to permanent ARP list (or leave empty). |
| 260 | |
| 261 | ### ISDN interface options: (see also: /usr/share/examples/isdn) ### |
| 262 | isdn_enable="NO" # Enable the ISDN subsystem (or NO). |
| 263 | isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). |
| 264 | isdn_flags="-dn -d0x1f9" # Flags for isdnd |
| 265 | isdn_ttype="cons25" # terminal type for fullscreen mode |
| 266 | isdn_screenflags="NO" # screenflags for ${isdn_fsdev} |
| 267 | isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). |
| 268 | isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace |
| 269 | |
| 270 | ### Miscellaneous network options: ### |
| 271 | icmp_bmcastecho="NO" # respond to broadcast ping packets |
| 272 | |
| 273 | ### IPv6 options: ### |
| 274 | ipv6_enable="NO" # Set to YES to set up for IPv6. |
| 275 | ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). |
| 276 | ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). |
| 277 | #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) |
| 278 | ipv6_static_routes="" # Set to static route list (or leave empty). |
| 279 | #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 |
| 280 | # route toward loopback interface. |
| 281 | #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" |
| 282 | ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. |
| 283 | ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. |
| 284 | ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. |
| 285 | ipv6_router_flags="" # Flags to IPv6 routing daemon. |
| 286 | #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local |
| 287 | # addrs. |
| 288 | #ipv6_router_flags="-q" # If you want to run a routing daemon on an end |
| 289 | # node, you should stop advertisement. |
| 290 | #ipv6_network_interfaces="ed0 ep0" # Examples for router |
| 291 | # or static configuration for end node. |
| 292 | # Choose correct prefix value. |
| 293 | #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. |
| 294 | #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. |
| 295 | #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry |
| 296 | #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. |
| 297 | ipv6_default_interface="NO" # Default output interface for scoped addrs. |
| 298 | # Now this works only for IPv6 link local |
| 299 | # multicast addrs. |
| 300 | rtadvd_enable="NO" # Set to YES to enable an IPv6 router |
| 301 | # advertisement daemon. If set to YES, |
| 302 | # this router becomes a possible candidate |
| 303 | # IPv6 default router for local subnets. |
| 304 | rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. |
| 305 | rtsold_enable="NO" # Set to YES to enable an IPv6 routing |
| 306 | # solicitation daemon. This is used for |
| 307 | # automatic discovery of non-link local |
| 308 | # addresses. |
| 309 | rtsold_flags="-a" # Do autoprobing of outgoing interface. |
| 310 | mroute6d_enable="NO" # Do IPv6 multicast routing. |
| 311 | mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast |
| 312 | # routing daemon. You need to |
| 313 | # install it from package or |
| 314 | # port. |
| 315 | mroute6d_flags="" # Flags to IPv6 multicast routing daemon. |
| 316 | stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 |
| 317 | # tunneling interface. Specify this entry |
| 318 | # to enable 6to4 interface. |
| 319 | stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, |
| 320 | # to limit peer addr range. Effective value |
| 321 | # is 0-31. |
| 322 | stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. |
| 323 | # If you like, you can set "AUTO" for this. |
| 324 | stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 |
| 325 | ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH |
| 326 | # IPv6-to-IPv4 TCP translator. You also need |
| 327 | # faithd(8) setup. |
| 328 | ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr |
| 329 | # communication. (like ::ffff:a.b.c.d) |
| 330 | ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall |
| 331 | # functionality |
| 332 | ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall |
| 333 | ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) |
| 334 | ipv6_firewall_quiet="NO" # Set to YES to suppress rule display |
| 335 | ipv6_firewall_logging="NO" # Set to YES to enable events logging |
| 336 | ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file |
| 337 | ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, |
| 338 | # see /usr/src/contrib/ipfilter/rules |
| 339 | # for examples |
| 340 | |
| 341 | ############################################################## |
| 342 | ### System console options ################################# |
| 343 | ############################################################## |
| 344 | |
| 345 | keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). |
| 346 | keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). |
| 347 | keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. |
| 348 | keychange="NO" # function keys default values (or NO). |
| 349 | cursor="NO" # cursor type {normal|blink|destructive} (or NO). |
| 350 | scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). |
| 351 | font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). |
| 352 | font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). |
| 353 | font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). |
| 354 | blanktime="300" # blank time (in seconds) or "NO" to turn it off. |
| 355 | saver="NO" # screen saver: Uses /modules/${saver}_saver.ko |
| 356 | moused_enable="NO" # Run the mouse daemon. |
| 357 | moused_type="auto" # See man page for rc.conf(5) for available settings. |
| 358 | moused_port="/dev/psm0" # Set to your mouse port. |
| 359 | moused_flags="" # Any additional flags to moused. |
| 360 | mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your |
| 361 | # language code table, specify alternative range |
| 362 | # start like mousechar_start=3, see vidcontrol(1) |
| 363 | vidhistory="" # Set video history buffer size |
| 364 | allscreens_flags="" # Set this vidcontrol mode for all virtual screens |
| 365 | allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens |
| 366 | |
| 367 | |
| 368 | ############################################################## |
| 369 | ### Mail Transfer Agent (MTA) options ###################### |
| 370 | ############################################################## |
| 371 | |
| 372 | mta_start_script="/etc/rc.sendmail" |
| 373 | # Script to start your chosen MTA, called by /etc/rc. |
| 374 | # Settings for /etc/rc.sendmail: |
| 375 | sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). |
| 376 | sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) |
| 377 | sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission |
| 378 | sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" |
| 379 | # Flags for localhost-only MTA |
| 380 | sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). |
| 381 | sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) |
| 382 | sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). |
| 383 | sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" |
| 384 | # Flags for sendmail_msp_queue daemon. |
| 385 | sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO). |
| 386 | |
| 387 | |
| 388 | ############################################################## |
| 389 | ### Miscellaneous administrative options ################### |
| 390 | ############################################################## |
| 391 | |
| 392 | mixer_enable="NO" # Manage mixer settings across reboots |
| 393 | cron_enable="YES" # Run the periodic job daemon. |
| 394 | cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). |
| 395 | cron_flags="" # Which options to pass to the cron daemon. |
| 396 | lpd_enable="NO" # Run the line printer daemon. |
| 397 | lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. |
| 398 | lpd_flags="" # Flags to lpd (if enabled). |
| 399 | nscd_enable="NO" # Run the nsswitch caching daemon. |
| 400 | usbd_enable="NO" # Run the usbd daemon. |
| 401 | usbd_flags="" # Flags to usbd (if enabled). |
| 402 | devd_enable="NO" # Rund devd(8) daemon. |
| 403 | devd_flags="" # Flags to devd(8) (if enabled). |
| 404 | dumpdev="NO" # Device name to crashdump to (or NO). |
| 405 | dumpdir="/var/crash" # Directory where crash dumps are to be stored |
| 406 | savecore_flags="" # Used if dumpdev is enabled above, and present. |
| 407 | enable_quotas="NO" # turn on quotas on startup (or NO). |
| 408 | check_quotas="YES" # Check quotas on startup (or NO). |
| 409 | accounting_enable="NO" # Turn on process accounting (or NO). |
| 410 | sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). |
| 411 | linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). |
| 412 | clear_tmp_enable="NO" # Clear /tmp at startup. |
| 413 | ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks |
| 414 | ldconfig_paths="/usr/lib /usr/lib/gcc* /usr/lib/compat /usr/pkg/lib /usr/local/lib" |
| 415 | # shared library search paths |
| 416 | kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure |
| 417 | update_motd="YES" # update version info in /etc/motd (or NO) |
| 418 | start_vinum="NO" # set to YES to start vinum |
| 419 | rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). |
| 420 | dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot |
| 421 | newsyslog_enable="NO" # Run newsyslog at startup. |
| 422 | newsyslog_flags="" # Flags to newsyslog (if enabled). |
| 423 | resident_enable="NO" # Process /etc/resident.conf |
| 424 | varsym_enable="NO" # Process /etc/varsym.conf |
| 425 | watchdogd_enable="NO" # Start the software watchdog daemon |
| 426 | |
| 427 | ############################################################## |
| 428 | ### Jail Configuration ####################################### |
| 429 | ############################################################## |
| 430 | |
| 431 | jail_enable="NO" # Set to NO to disable starting of any jails |
| 432 | jail_list="" # Space separated list of names of jails |
| 433 | jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname |
| 434 | jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail |
| 435 | jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail |
| 436 | |
| 437 | # |
| 438 | # To use rc's built-in jail infrastructure create entries for |
| 439 | # each jail, specified in jail_list, with the following variables. |
| 440 | # NOTES: |
| 441 | # - replace 'example' with the jail's name. |
| 442 | # - except rootdir, hostname and ip, all of the following variables may be made |
| 443 | # global jail variables if you don't specify a jail name (ie. jail_interface). |
| 444 | # |
| 445 | #jail_example_rootdir="/usr/jail/default" # Jail's root directory |
| 446 | #jail_example_hostname="default.domain.com" # Jail's hostname |
| 447 | #jail_example_ip="192.168.0.10" # Jail's IP number |
| 448 | #jail_example_interface="" # Interface to create the IP alias on |
| 449 | #jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting |
| 450 | #jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping |
| 451 | #jail_example_fdesc_enable="NO" # mount fdesc in the jail |
| 452 | #jail_example_procfs_enable="NO" # mount procfs in jail |
| 453 | #jail_example_mount_enable="NO" # mount/umount jail's fs |
| 454 | #jail_example_fstab="" # fstab(5) for mount/umount |
| 455 | #jail_example_flags="-l -U root" # flags for jail(8) |
| 456 | |
| 457 | ############################################################## |
| 458 | ### Define source_rc_confs, the mechanism used by /etc/rc.* ## |
| 459 | ### scripts to source rc_conf_files overrides safely. ## |
| 460 | ############################################################## |
| 461 | |
| 462 | if [ -z "${source_rc_confs_defined}" ]; then |
| 463 | source_rc_confs_defined=yes |
| 464 | source_rc_confs () { |
| 465 | local i sourced_files |
| 466 | for i in ${rc_conf_files}; do |
| 467 | case ${sourced_files} in |
| 468 | *:$i:*) |
| 469 | ;; |
| 470 | *) |
| 471 | sourced_files="${sourced_files}:$i:" |
| 472 | if [ -r $i ]; then |
| 473 | . $i |
| 474 | fi |
| 475 | ;; |
| 476 | esac |
| 477 | done |
| 478 | } |
| 479 | fi |