Makefile.inc1

   1 #
   2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
   3 #
   4 # This file defines the user-driven targets.
   5 #
   6 # Standard targets are documented in the makefiles in /usr/share/mk and include:
   7 #       obj depend all install clean cleandepend cleanobj
   8 #
   9 # Build-time options are documented in make.conf(5).
  10 #
  11
  12 # Put initial settings here.
  13 SUBDIR=
  14
  15 # /libexec/ld-elf.so.2 needs to be installed first
  16 # Otherwise, install(1) beeing a dynamically linked binary will fail
  17 # during the first upgrade from a static to a dynamic world
  18 .if exists(${.CURDIR}/libexec)
  19 SUBDIR+= libexec
  20 .endif
  21
  22 # We need to do include and lib early.
  23 #
  24 .if exists(${.CURDIR}/include)
  25 SUBDIR+= include
  26 .endif
  27 .if exists(${.CURDIR}/lib)
  28 SUBDIR+= lib
  29 .endif
  30 # This exists simply to ensure that the obj dir hierarchy is
  31 # intact for nrelease, allowing the nrelease Makefile's to
  32 # reference ${.OBJDIR}.
  33 #
  34 .if exists(${.CURDIR}/nrelease)
  35 SUBDIR+= nrelease
  36 .endif
  37
  38 .if exists(${.CURDIR}/bin)
  39 SUBDIR+= bin
  40 .endif
  41 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
  42 SUBDIR+= games
  43 .endif
  44 .if exists(${.CURDIR}/gnu)
  45 SUBDIR+= gnu
  46 .endif
  47 .if exists(${.CURDIR}/sbin)
  48 SUBDIR+= sbin
  49 .endif
  50 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
  51 SUBDIR+= share
  52 .endif
  53 .if exists(${.CURDIR}/sys)
  54 SUBDIR+= sys
  55 .endif
  56 .if exists(${.CURDIR}/usr.bin)
  57 SUBDIR+= usr.bin
  58 .endif
  59 .if exists(${.CURDIR}/usr.sbin)
  60 SUBDIR+= usr.sbin
  61 .endif
  62
  63 .if exists(${.CURDIR}/etc)
  64 SUBDIR+= etc
  65 .endif
  66
  67 # These are last, since it is nice to at least get the base system
  68 # rebuilt before you do them.
  69 .if defined(LOCAL_DIRS)
  70 .for _DIR in ${LOCAL_DIRS}
  71 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
  72 SUBDIR+= ${_DIR}
  73 .endif
  74 .endfor
  75 .endif
  76
  77 .if defined(SUBDIR_OVERRIDE)
  78 SUBDIR=         ${SUBDIR_OVERRIDE}
  79 .endif
  80
  81 .if defined(NOCLEANDIR)
  82 CLEANDIR=       clean cleandepend
  83 .else
  84 CLEANDIR=       cleandir
  85 .endif
  86
  87 .if defined(NO_CLEAN)
  88 NOCLEAN=        # defined
  89 .endif
  90
  91 # Object directory base in primary make.  Note that when we rerun make
  92 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
  93 # subdirectory because the rest of the build system needs it that way.
  94 # The original object directory base is saved in OBJTREE.
  95 #
  96 MAKEOBJDIRPREFIX?=      /usr/obj
  97 OBJTREE?=               ${MAKEOBJDIRPREFIX}
  98
  99 # Used for stage installs and pathing
 100 #
 101 DESTDIRBASE:=           ${OBJTREE}${.CURDIR}
 102
 103 # Remove DESTDIR from MAKEFLAGS.  It is present in the environment
 104 # anyhow, and we need to be able to override it for stage installs
 105 .MAKEFLAGS:=    ${.MAKEFLAGS:NDESTDIR=*}
 106
 107 # This section sets the tools used to build the world/kernel
 108 WORLD_CCVER?=           gcc80
 109 WORLD_LDVER?=           ld.gold
 110 WORLD_BINUTILSVER?=     binutils227
 111
 112 # Set the backup parameters if they are not already defined
 113 #
 114 WORLD_BACKUP?=          /var/backups/world_backup
 115 AUTO_BACKUP?=           ${OBJTREE}/world_backup/${DESTDIR}
 116
 117 TARGET_ARCH?=   ${MACHINE_ARCH}
 118 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
 119 TARGET?=        ${MACHINE}
 120 .else
 121 TARGET?=        ${TARGET_ARCH}
 122 .endif
 123 .if make(buildworld)
 124 BUILD_ARCH!=    sysctl -n hw.machine_arch
 125
 126 # temporary until everybody has converted to x86_64
 127 .if ${BUILD_ARCH} == "amd64"
 128 BUILD_ARCH=     x86_64
 129 .endif
 130
 131 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 132 .error To cross-build, set TARGET_ARCH.
 133 .endif
 134 .endif
 135
 136 # XXX this is ugly and we need to come up with a nicer solution
 137 .if !defined(TARGET_PLATFORM)
 138 .if ${TARGET_ARCH} == "x86_64"
 139 TARGET_PLATFORM= pc64
 140 .else
 141 .error Unknown target architecture.
 142 .endif
 143 .endif
 144
 145 THREAD_LIB?=    thread_xu
 146 .if ${THREAD_LIB} == "c_r"
 147 .if defined(NO_LIBC_R)
 148 .error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
 149 .endif
 150 .endif
 151
 152 # BTOOLS        (Natively built) All non-cross-development tools that the
 153 #               main build needs.  This includes things like 'mkdir' and 'rm'.
 154 #               We will not use the native system's exec path once we start
 155 #               on WORLD.  (bootstrap-tools and build-tools or BTOOLS)
 156 #
 157 # CTOOLS        (Natively built) Cross development tools which are specific
 158 #               to the target architecture.
 159 #
 160 # WORLD         (Cross built) Our ultimate buildworld, using only BTOOLS and
 161 #               CTOOLS.
 162 #
 163 # MACHINE_PLATFORM      Platform Architecture we are building on
 164 # MACHINE               Machine Architecture (usually the same as MACHINE_ARCH)
 165 # MACHINE_ARCH          CPU Architecture we are building on
 166 #
 167 # TARGET_PLATFORM       Platform Architecture we are building for
 168 # TARGET                Machine Architecture we are building for
 169 # TARGET_ARCH           CPU Architecture we are building for
 170 #
 171 BTOOLSDEST=     ${DESTDIRBASE}/btools_${MACHINE_ARCH}
 172 CTOOLSDEST=     ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
 173 WORLDDEST=      ${DESTDIRBASE}/world_${TARGET_ARCH}
 174
 175 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
 176 # cross-tools stages to augment the existing command path to access newer
 177 # versions of certain utilities such as 'patch' that the cross-tools stage
 178 # might expect.
 179 #
 180 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/sbin:${BTOOLSDEST}/bin
 181
 182 # The cross-tools path containing the cross-tools to cross build the
 183 # ultimate world.
 184 #
 185 CTOOLSPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/sbin:${CTOOLSDEST}/bin
 186
 187 # The strict temporary command path contains all binaries required
 188 # by the buildworld system after the cross-tools stage.
 189 #
 190 # NOTE: Append '/usr/local/bin:/usr/pkg/bin' to support external compilers.
 191 #       See compilers.conf(5) man page for more info.
 192 #
 193 STRICTTMPPATH= ${CTOOLSPATH}:${BTOOLSPATH}:/usr/local/bin:/usr/pkg/bin
 194
 195 TMPDIR?=        /tmp
 196 TMPPID!=        echo $$$$
 197
 198 #
 199 # Building a world goes through the following stages
 200 #
 201 # 1. bootstrap-tool stage [BMAKE]
 202 #       This stage is responsible for creating programs that
 203 #       are needed for backward compatibility reasons. They
 204 #       are not built as cross-tools.
 205 # 2. build-tool stage [TMAKE]
 206 #       This stage is responsible for creating the object
 207 #       tree and building any tools that are needed during
 208 #       the build process.
 209 # 3. cross-tool stage [XMAKE]
 210 #       This stage is responsible for creating any tools that
 211 #       are needed for cross-builds. A cross-compiler is one
 212 #       of them.
 213 # 4. world stage [WMAKE]
 214 #       This stage actually builds the world.
 215 # 5. install stage (optional) [IMAKE]
 216 #       This stage installs a previously built world.
 217 #
 218 # In all cases we must carefully adjust the environment so the proper
 219 # tools and header files are used.
 220 #
 221 # NOTE: The M4 environment variable is used by the [f]lex binary to
 222 #       override the location of the 'm4' binary.  The override is
 223 #       needed for certain buildworld version transitions, specifically
 224 #       past a certain point in 3.3 because the older /usr/bin/m4 will
 225 #       generate output that will blow up the newer [f]lex/yacc/bison
 226 #       utilities.
 227 #
 228
 229 # bootstrap-tool stage
 230 #
 231 BMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 232                 OBJTREE=${OBJTREE} \
 233                 DESTDIR=${BTOOLSDEST} \
 234                 LC_ALL=C \
 235                 PATH=${BTOOLSPATH}:${PATH} \
 236                 M4=${BTOOLSDEST}/usr/bin/m4 \
 237                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 238
 239 BMAKE=          ${BMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
 240                 -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
 241                 -DNO_WERROR -DNO_NLS -DSYSBUILD
 242
 243 # build-tool stage
 244 #
 245 TMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 246                 OBJTREE=${OBJTREE} \
 247                 DESTDIR= \
 248                 LC_ALL=C \
 249                 PATH=${BTOOLSPATH}:${PATH} \
 250                 M4=${BTOOLSDEST}/usr/bin/m4 \
 251                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 252
 253 TMAKE=          ${TMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
 254                 -DNOSHARED -DSYSBUILD
 255
 256 # cross-tool stage
 257 #
 258 # note: TOOLS_PREFIX points to the obj root holding the cross
 259 #       compiler binaries, while USRDATA_PREFIX points to the obj root
 260 #       holding the target environment (and also determines where cross-built
 261 #       libraries, crt*.o, and include files are installed).
 262 #
 263 XMAKEENV=       MAKEOBJDIRPREFIX=${CTOOLSDEST} \
 264                 OBJTREE=${OBJTREE} \
 265                 DESTDIR=${CTOOLSDEST} \
 266                 LC_ALL=C \
 267                 _SHLIBDIRPREFIX=${CTOOLSDEST} \
 268                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 269                 TOOLS_PREFIX=${CTOOLSDEST} \
 270                 USRDATA_PREFIX=${WORLDDEST} \
 271                 SELECT_LINKER=${WORLD_LDVER} \
 272                 M4=${BTOOLSDEST}/usr/bin/m4 \
 273                 PATH=${BTOOLSPATH}:${PATH}
 274
 275 XMAKE=          ${XMAKEENV} make -f Makefile.inc1 -DNO_GDB \
 276                 -DBOOTSTRAPPING -DNOMAN -DNOSHARED -DSYSBUILD
 277
 278 # world stage, note the strict path and note that TOOLS_PREFIX is left
 279 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
 280 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
 281 # for both binary and library paths, even though it is being compiled to
 282 # WORLDDEST.  None of the programs in the world stage are ever actually
 283 # executed during the buildworld/installworld.
 284 #
 285 CROSSENV=       MAKEOBJDIRPREFIX=${WORLDDEST} \
 286                 OBJTREE=${OBJTREE} \
 287                 MACHINE_ARCH=${TARGET_ARCH} \
 288                 MACHINE=${TARGET} \
 289                 MACHINE_PLATFORM=${TARGET_PLATFORM} \
 290                 LC_ALL=C \
 291                 OBJFORMAT_PATH=${CTOOLSDEST} \
 292                 HOST_CCVER=${HOST_CCVER} \
 293                 CCVER=${WORLD_CCVER} \
 294                 LDVER=${WORLD_LDVER} \
 295                 BINUTILSVER=${WORLD_BINUTILSVER}
 296
 297 WMAKEENV=       ${CROSSENV} \
 298                 WORLDBUILD=1 \
 299                 DESTDIR=${WORLDDEST} \
 300                 _SHLIBDIRPREFIX=${WORLDDEST} \
 301                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 302                 M4=${BTOOLSDEST}/usr/bin/m4 \
 303                 PATH=${STRICTTMPPATH}
 304
 305 WMAKE=          ${WMAKEENV} make -f Makefile.inc1 -DSYSBUILD
 306
 307 # install stage
 308 #
 309 IMAKEENV=       ${CROSSENV} \
 310                 PATH=${STRICTTMPPATH}
 311 IMAKE=          ${IMAKEENV} make -f Makefile.inc1 -DSYSBUILD
 312
 313 # kernel stage
 314 #
 315 KMAKEENV=       ${WMAKEENV}
 316
 317 # buildworld
 318 #
 319 # Attempt to rebuild the entire system, with reasonable chance of
 320 # success, regardless of how old your existing system is.
 321 #
 322 _worldtmp: _cleantmp _mtreetmp
 323 .ORDER: _cleantmp _mtreetmp
 324
 325 _cleantmp:
 326 .if !defined(NOCLEAN)
 327         rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 328 .else
 329         # XXX - These two can depend on any header file.
 330         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
 331         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
 332 .endif
 333
 334 _mtreetmp:
 335         @echo
 336         @echo "--------------------------------------------------------------"
 337         @echo ">>> Rebuilding the temporary build tree"
 338         @echo "--------------------------------------------------------------"
 339         mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 340 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
 341         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist        \
 342                 -p ${_dir}/  > /dev/null
 343         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist         \
 344                 -p ${_dir}/usr > /dev/null
 345 .endfor
 346         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist     \
 347                 -p ${WORLDDEST}/usr/include > /dev/null
 348         ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
 349
 350 _bwinit:
 351         @echo "--------------------------------------------------------------"
 352         @echo ">>> starting buildworld target"
 353         @echo "--------------------------------------------------------------"
 354 _bootstrap-tools:
 355         @echo
 356         @echo "--------------------------------------------------------------"
 357         @echo ">>> stage 1: bootstrap tools"
 358         @echo "--------------------------------------------------------------"
 359         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 360 _cleanobj:
 361         @echo
 362         @echo "--------------------------------------------------------------"
 363         @echo ">>> stage 2a: cleaning up the object tree"
 364         @echo "--------------------------------------------------------------"
 365         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 366 _obj:
 367         @echo
 368         @echo "--------------------------------------------------------------"
 369         @echo ">>> stage 2b: rebuilding the object tree"
 370         @echo "--------------------------------------------------------------"
 371         cd ${.CURDIR}; ${WMAKE} par-obj
 372 _build-tools:
 373         @echo
 374         @echo "--------------------------------------------------------------"
 375         @echo ">>> stage 2c: build tools"
 376         @echo "--------------------------------------------------------------"
 377         cd ${.CURDIR}; ${TMAKE} build-tools
 378 _cross-tools:
 379         @echo
 380         @echo "--------------------------------------------------------------"
 381         @echo ">>> stage 3: cross tools"
 382         @echo "--------------------------------------------------------------"
 383         cd ${.CURDIR}; ${XMAKE} cross-tools
 384 _includes:
 385         @echo
 386         @echo "--------------------------------------------------------------"
 387         @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
 388         @echo "--------------------------------------------------------------"
 389         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
 390 _libraries:
 391         @echo
 392         @echo "--------------------------------------------------------------"
 393         @echo ">>> stage 4b: building libraries"
 394         @echo "--------------------------------------------------------------"
 395         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOMAN -DNOFSCHG libraries
 396 _depend:
 397         @echo
 398         @echo "--------------------------------------------------------------"
 399         @echo ">>> stage 4c: make dependencies"
 400         @echo "--------------------------------------------------------------"
 401         cd ${.CURDIR}; ${WMAKE} par-depend
 402 everything:
 403         @echo
 404         @echo "--------------------------------------------------------------"
 405         @echo ">>> stage 4d: building everything"
 406         @echo "--------------------------------------------------------------"
 407         cd ${.CURDIR}; ${WMAKE} all
 408 _initrd:
 409         @echo
 410         @echo "--------------------------------------------------------------"
 411         @echo ">>> stage 5: building rescue and initrd"
 412         @echo "--------------------------------------------------------------"
 413         cd ${.CURDIR}/initrd; ${WMAKEENV} make all
 414 _bwdone:
 415         @echo "--------------------------------------------------------------"
 416         @echo ">>> buildworld target complete"
 417         @echo "--------------------------------------------------------------"
 418 _qwinit:
 419         @echo "--------------------------------------------------------------"
 420         @echo ">>> starting quickworld target"
 421         @echo "--------------------------------------------------------------"
 422 _qwdone:
 423         @echo "--------------------------------------------------------------"
 424         @echo ">>> quickworld target complete"
 425         @echo "--------------------------------------------------------------"
 426 _iwinit:
 427         @echo "--------------------------------------------------------------"
 428         @echo ">>> starting installworld target"
 429         @echo "--------------------------------------------------------------"
 430
 431 # note: buildworld no longer depends on _cleanobj because we rm -rf the
 432 # entire object tree and built the bootstrap tools in a different location.
 433 #
 434 # buildworld    - build everything from scratch
 435 # quickworld    - skip the bootstrap, build, and cross-build steps
 436 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
 437 #
 438 # note: we include _obj in realquickworld to prevent accidental creation
 439 # of files in /usr/src.
 440
 441 WMAKE_TGTS=
 442 .if !defined(SUBDIR_OVERRIDE)
 443 WMAKE_TGTS+=    _worldtmp _bootstrap-tools
 444 .endif
 445 WMAKE_TGTS+=    _obj _build-tools
 446 .if !defined(SUBDIR_OVERRIDE)
 447 WMAKE_TGTS+=    _cross-tools
 448 .endif
 449 WMAKE_TGTS+=    _includes _libraries _depend everything _initrd
 450
 451 .if defined(WMAKE_TGTS_OVERRIDE)
 452 SUBDIR=
 453 WMAKE_TGTS=     ${WMAKE_TGTS_OVERRIDE}
 454 .endif
 455
 456 QMAKE_TGTS=     _mtreetmp _obj _includes _libraries _depend everything _initrd
 457
 458 buildworld: _bwinit ${WMAKE_TGTS} _bwdone
 459
 460 quickworld: _qwinit ${QMAKE_TGTS} _qwdone
 461
 462 realquickworld: _qwinit _mtreetmp _obj _includes _libraries everything _qwdone
 463
 464 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
 465
 466 .ORDER: _bwinit ${WMAKE_TGTS} _bwdone
 467 .ORDER: _obj _includes
 468 .ORDER: _qwinit _mtreetmp _obj
 469 .ORDER: installcheck backupworld-auto
 470 .ORDER: everything _qwdone
 471
 472
 473 # installcheck
 474 #
 475 # Checks to be sure system is ready for installworld
 476 #
 477 installcheck: _iwinit
 478 .for _user in _pflogd
 479         @pw usershow ${_user} >/dev/null || { \
 480             echo "You need to run 'make preupgrade' first."; \
 481             /usr/bin/false; \
 482         }
 483 .endfor
 484 .for _group in _pflogd authpf
 485         @pw groupshow ${_group} >/dev/null || { \
 486             echo "You need to run 'make preupgrade' first."; \
 487             /usr/bin/false; \
 488         }
 489 .endfor
 490 .if !defined(OVERRIDE_CHECKS)
 491 .if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
 492         @case `uname -r` in \
 493             1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) \
 494                 echo "You must upgrade your kernel to at least 1.5.4" \
 495                      "and reboot before you can safely installworld," \
 496                      "due to libc/system call ABI changes."; \
 497                 /usr/bin/false; \
 498         esac
 499         @case `uname -r` in \
 500             1.*|2.*|3.0*|3.1*|3.2*|3.3*|3.4*|3.5*|3.6*) \
 501                 echo "The system is too old for a normal installworld," \
 502                      "you need to use 'installworld-force'."; \
 503                 /usr/bin/false; \
 504         esac
 505 .endif
 506 .endif
 507
 508 # installworld
 509 #
 510 # Backs up the current world if ${AUTO_BACKUP} is writable.
 511 # Installs everything compiled by a 'buildworld'.
 512 #
 513 installworld: installcheck
 514         -@mkdir -p ${AUTO_BACKUP} > /dev/null 2>&1
 515         @cd ${.CURDIR}; \
 516             (touch ${AUTO_BACKUP}/.updating > /dev/null 2>&1 && \
 517              ${IMAKE} backupworld-auto) || \
 518             echo "Cannot write to ${AUTO_BACKUP} - world not backed up"
 519
 520         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
 521         ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc \
 522             ${DESTDIR}/etc/upgrade/
 523         cd ${.CURDIR}; ${IMAKE} -DWORLDINSTALL initrd
 524
 525         sync
 526         @echo "--------------------------------------------------------------"
 527         @echo ">>> installworld target complete"
 528         @echo "--------------------------------------------------------------"
 529
 530 installworld-force:
 531         @echo "Doing a forced installworld.  This will install to a temporary directory,"
 532         @echo "then copy the main binaries and libraries with a static cpdup to ${DESTDIR}/"
 533         @echo "and finally will issue a normal installworld."
 534         @echo
 535         @echo "Starting in 5 seconds.  ^C to abort."
 536         @echo
 537         sleep 1
 538         rm -rf /usr/obj/temp > /dev/null 2>&1 || chflags -R noschg /usr/obj/temp
 539         rm -rf /usr/obj/temp
 540         mkdir -p /usr/obj/temp/cpdup/bin
 541         (cd ${.CURDIR}/bin/cpdup; \
 542                 make clean && \
 543                 make obj && \
 544                 make clean && \
 545                 make CFLAGS=-static all install DESTDIR=/usr/obj/temp/cpdup NOMAN=TRUE)
 546         @echo "XXXXXXXXX Installing to temporary XXXXXXXXX"
 547         @sleep 1
 548         (cd ${.CURDIR}; ${MAKE} installworld DESTDIR=/usr/obj/temp > /dev/null 2>&1)
 549         @echo "XXXXXXXXX Blasting binaries and libraries XXXXXXXXX"
 550         @sleep 1
 551         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/bin /bin
 552         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/sbin /sbin
 553         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/lib /lib
 554         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/bin /usr/bin
 555         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/sbin /usr/sbin
 556         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/lib /usr/lib
 557         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/libexec /libexec
 558         /usr/obj/temp/cpdup/bin/cpdup -i0 /usr/obj/temp/usr/libexec /usr/libexec
 559         @echo "XXXXXXXXX Doing final installworld XXXXXXXX"
 560         sleep 5
 561         (cd ${.CURDIR}; ${MAKE} installworld OVERRIDE_CHECKS=TRUE)
 562         (cd ${.CURDIR}; ${MAKE} upgrade OVERRIDE_CHECKS=TRUE)
 563         (cd ${.CURDIR}; ${MAKE} initrd)
 564
 565 # reinstall
 566 #
 567 # If you have a build server, you can NFS mount the source and obj directories
 568 # and do a 'make reinstall' on the *client* to install new binaries from the
 569 # most recent server build.
 570 #
 571 reinstall:
 572         @echo "--------------------------------------------------------------"
 573         @echo ">>> Making hierarchy"
 574         @echo "--------------------------------------------------------------"
 575         cd ${.CURDIR}; make -f Makefile.inc1 hierarchy
 576         @echo
 577         @echo "--------------------------------------------------------------"
 578         @echo ">>> Installing everything"
 579         @echo "--------------------------------------------------------------"
 580         cd ${.CURDIR}; make -f Makefile.inc1 install
 581
 582 # initrd
 583 #
 584 # Install the rescue tools and the initrd image built by 'buildworld'.
 585 #
 586 initrd: .PHONY
 587         (cd ${.CURDIR}/initrd; ${IMAKEENV} make install)
 588
 589
 590 # buildkernel, nativekernel, quickkernel, realquickkernel, and installkernel
 591 #
 592 # Which kernels to build and/or install is specified by setting
 593 # KERNCONF. If not defined an X86_64_GENERIC kernel is built/installed.
 594 # Only the existing (depending TARGET) config files are used
 595 # for building kernels and only the first of these is designated
 596 # as the one being installed.
 597 #
 598 # You can specify INSTALLSTRIPPED=1 if you wish the installed
 599 # kernel and modules to be stripped of its debug info (required
 600 # symbols are left intact).  You can specify INSTALLSTRIPPEDMODULES
 601 # if you only want to strip the modules of their debug info.  These
 602 # only apply if you have DEBUG=-g in your kernel config or make line.
 603 #
 604 # Note that we have to use TARGET instead of TARGET_ARCH when
 605 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 606 # be set to cross-build, we have to make sure TARGET is set
 607 # properly.
 608
 609 .if !defined(KERNCONF) && defined(KERNEL)
 610 KERNCONF=       ${KERNEL}
 611 KERNWARN=       yes
 612 .else
 613 # XXX makeshift fix to build the right kernel for the (target) architecture
 614 # We should configure this in the platform files somehow
 615 .if ${TARGET_ARCH} == "x86_64"
 616 KERNCONF?=      X86_64_GENERIC
 617 .endif
 618 .endif
 619 INSTKERNNAME?=  kernel
 620
 621 KRNLSRCDIR=     ${.CURDIR}/sys
 622 KRNLCONFDIR=    ${KRNLSRCDIR}/config
 623 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 624 KERNCONFDIR?=   ${KRNLCONFDIR}
 625
 626 BUILDKERNELS=
 627 INSTALLKERNEL=
 628 .for _kernel in ${KERNCONF}
 629 .if exists(${KERNCONFDIR}/${_kernel})
 630 BUILDKERNELS+=  ${_kernel}
 631 .if empty(INSTALLKERNEL)
 632 INSTALLKERNEL= ${_kernel}
 633 .endif
 634 .endif
 635 .endfor
 636
 637 # kernel version numbers survive rm -rf
 638 #
 639 .for _kernel in ${BUILDKERNELS}
 640 .if exists(${KRNLOBJDIR}/${_kernel}/version)
 641 KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
 642 .endif
 643 .endfor
 644
 645 # buildkernel
 646 #
 647 # Builds all kernels defined by BUILDKERNELS.
 648 #
 649 bk_tools:
 650         @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 651             echo "You must buildworld before buildkernel.  If you wish"; \
 652             echo "to build a kernel using native tools, config it manually"; \
 653             echo "or use the nativekernel target if you are in a rush"; \
 654             /usr/bin/false; \
 655         fi
 656
 657 maybe_bk_tools:
 658 .for _kernel in ${BUILDKERNELS}
 659         @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 660             if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 661                 echo "The kernel was build using buildworld tools which no" ; \
 662                 echo "longer appear to exist, (real)quickkernel failed!" ; \
 663                 /usr/bin/false; \
 664             fi; \
 665         fi
 666 .endfor
 667
 668 bk_build_list:
 669 .if empty(BUILDKERNELS)
 670         @echo ">>> ERROR: Missing kernel configuration file(s)."
 671         @echo ">>> ${KERNCONF} not found in ${KERNCONFDIR}."
 672         @false
 673 .endif
 674
 675 bk_kernwarn:
 676 .if defined(KERNWARN)
 677         @echo "--------------------------------------------------------------"
 678         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 679         @echo "--------------------------------------------------------------"
 680         @sleep 3
 681 .endif
 682         @echo
 683
 684 # The buildkernel target rebuilds the specified kernels from scratch
 685 # using the crossbuild tools generated by the last buildworld.  It is
 686 # the safest (but also the most time consuming) way to build a new kernel.
 687 #
 688 buildkernel:    bk_tools bk_build_list bk_kernwarn
 689 .for _kernel in ${BUILDKERNELS}
 690         @echo "--------------------------------------------------------------"
 691         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 692         @echo "--------------------------------------------------------------"
 693         @echo "===> ${_kernel}"
 694 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 695         rm -rf ${KRNLOBJDIR}/${_kernel}
 696 .else
 697         @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 698                 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
 699                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 700 .endif
 701         mkdir -p ${KRNLOBJDIR}
 702 .if !defined(NO_KERNELCONFIG)
 703         cd ${KRNLCONFDIR}; \
 704                 PATH=${STRICTTMPPATH} \
 705                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 706                         ${KERNCONFDIR}/${_kernel}
 707 .endif
 708 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
 709         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
 710 .endif
 711         touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
 712 .if !defined(NO_KERNELDEPEND)
 713         cd ${KRNLOBJDIR}/${_kernel}; \
 714             ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
 715 .endif
 716         cd ${KRNLOBJDIR}/${_kernel}; \
 717             ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
 718         @echo "--------------------------------------------------------------"
 719         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 720         @echo "--------------------------------------------------------------"
 721 .endfor
 722
 723 # The nativekernel target rebuilds the specified kernels from scratch
 724 # using the system's standard compiler rather than using the crossbuild
 725 # tools generated by the last buildworld.  This is fairly safe if your
 726 # system is reasonable up-to-date.
 727 #
 728 nativekernel:   bk_build_list bk_kernwarn
 729 .for _kernel in ${BUILDKERNELS}
 730         @echo "--------------------------------------------------------------"
 731         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 732         @echo "--------------------------------------------------------------"
 733         @echo "===> ${_kernel}"
 734 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 735         rm -rf ${KRNLOBJDIR}/${_kernel}
 736 .else
 737         @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
 738                 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
 739                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 740 .endif
 741         mkdir -p ${KRNLOBJDIR}
 742 .if !defined(NO_KERNELCONFIG)
 743         cd ${KRNLCONFDIR}; \
 744                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 745                         ${KERNCONFDIR}/${_kernel}
 746 .endif
 747 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
 748         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
 749 .endif
 750         touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
 751 .if !defined(NO_KERNELDEPEND)
 752         cd ${KRNLOBJDIR}/${_kernel}; \
 753             make KERNEL=${INSTKERNNAME} depend
 754 .endif
 755         cd ${KRNLOBJDIR}/${_kernel}; \
 756             make KERNEL=${INSTKERNNAME} all
 757         @echo "--------------------------------------------------------------"
 758         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 759         @echo "--------------------------------------------------------------"
 760 .endfor
 761
 762 # The (real)quickkernel target rebuilds the specified kernels as quickly
 763 # as possible.  It will use the native tools or the buildworld cross tools
 764 # based on whether the kernel was originally generated via buildkernel or
 765 # nativekernel.  Config is rerun but the object hierarchy is not rebuilt.
 766 # realquickkernel skips the depend step (analogous to realquickworld).
 767 #
 768 quickkernel realquickkernel:    maybe_bk_tools bk_build_list bk_kernwarn
 769 .for _kernel in ${BUILDKERNELS}
 770         @echo "--------------------------------------------------------------"
 771         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 772         @echo "--------------------------------------------------------------"
 773         @echo "===> ${_kernel}"
 774 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
 775 .if !defined(NO_KERNELCONFIG)
 776         cd ${KRNLCONFDIR}; \
 777                 PATH=${STRICTTMPPATH} \
 778                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 779                         ${KERNCONFDIR}/${_kernel}
 780 .endif
 781 .if !defined(NO_KERNELDEPEND) && !make(realquickkernel)
 782         cd ${KRNLOBJDIR}/${_kernel}; \
 783             ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
 784 .endif
 785         cd ${KRNLOBJDIR}/${_kernel}; \
 786             ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
 787 .else
 788 .if !defined(NO_KERNELCONFIG)
 789         cd ${KRNLCONFDIR}; \
 790             config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 791                 ${KERNCONFDIR}/${_kernel}
 792 .endif
 793 .if !defined(NO_KERNELDEPEND) && !make(realquickkernel)
 794         cd ${KRNLOBJDIR}/${_kernel}; \
 795             make KERNEL=${INSTKERNNAME} depend
 796 .endif
 797         cd ${KRNLOBJDIR}/${_kernel}; \
 798             make KERNEL=${INSTKERNNAME} all
 799 .endif
 800         @echo "--------------------------------------------------------------"
 801         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 802         @echo "--------------------------------------------------------------"
 803 .endfor
 804
 805
 806 # installkernel
 807 #
 808 # Install the kernel defined by INSTALLKERNEL
 809 #
 810 installkernel reinstallkernel:
 811         @echo "--------------------------------------------------------------"
 812         @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
 813         @echo "--------------------------------------------------------------"
 814 .if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
 815         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 816             ${IMAKEENV} make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 817 .else
 818         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 819             make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 820 .endif
 821         @echo "--------------------------------------------------------------"
 822         @echo ">>> Kernel install for ${INSTALLKERNEL} completed on `LC_ALL=C date`"
 823         @echo "--------------------------------------------------------------"
 824
 825
 826 # ------------------------------------------------------------------------
 827 #
 828 # From here onwards are utility targets used by the 'make world' and
 829 # related targets.  If your 'world' breaks, you may like to try to fix
 830 # the problem and manually run the following targets to attempt to
 831 # complete the build.  Beware, this is *not* guaranteed to work, you
 832 # need to have a pretty good grip on the current state of the system
 833 # to attempt to manually finish it.  If in doubt, 'make world' again.
 834 #
 835
 836 # bootstrap-tools: Build all tools required to build all tools.  Note that
 837 # order is important in a number of cases and also note that the bootstrap
 838 # and build tools stages have access to earlier binaries they themselves
 839 # had generated.
 840 #
 841 # patch:        older patch's do not have -i.  This program must be built
 842 #               first so other bootstrap tools that need to apply patches
 843 #               can use it.
 844 # [x]install:   dependancies on various new install features
 845 # rpcgen:       old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
 846 #               envs are not compatible with older objformat binaries.
 847 #
 848
 849 # BSTRAPDIRS1 - must be built in strict order, no parallelism
 850 #
 851 # order is very important. yacc before m4 before flex.  flex exec's m4,
 852 # m4's parser file needs the latest byacc (insanity!).
 853 #
 854 BSTRAPDIRS1= \
 855         usr.bin/patch \
 856         bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \
 857         bin/test bin/cat bin/ln bin/mv bin/expr bin/sh \
 858         bin/hostname bin/kill \
 859         usr.bin/yacc usr.bin/m4 usr.bin/localedef \
 860         usr.bin/uudecode usr.bin/xinstall \
 861         usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \
 862         usr.bin/find usr.bin/flex
 863
 864 # BSTRAPDIRS2 - may built in parallel
 865 #
 866 BSTRAPDIRS2= \
 867         usr.bin/sed usr.bin/uname usr.bin/touch \
 868         usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
 869         usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
 870         usr.bin/gencat usr.bin/chflags \
 871         usr.bin/uuencode usr.bin/cap_mkdb usr.bin/true usr.bin/false \
 872         usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
 873         usr.bin/tail usr.bin/unifdef \
 874         usr.sbin/chown usr.sbin/mtree usr.sbin/config \
 875         usr.sbin/zic usr.sbin/pwd_mkdb \
 876         gnu/usr.bin/grep usr.bin/sort usr.bin/gzip \
 877         usr.bin/mkcsmapper usr.bin/mkesdb usr.bin/crunch
 878
 879 bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
 880         touch ${BTOOLSDEST}/.bootstrap_done
 881
 882 bootstrap-tools-before:
 883         ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
 884
 885 bootstrap-tools-targets1: ${BSTRAPDIRS1:S/^/bstrap-/}
 886
 887 bootstrap-tools-targets2: ${BSTRAPDIRS2:S/^/bstrap-/}
 888
 889 .ORDER: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
 890
 891 .ORDER: ${BSTRAPDIRS1:S/^/bstrap-/}
 892
 893 .for _tool in ${BSTRAPDIRS1} ${BSTRAPDIRS2}
 894 bstrap-${_tool}!
 895         ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
 896                 cd ${.CURDIR}/${_tool}; \
 897                 make DIRPRFX=${_tool}/ obj && \
 898                 make DIRPRFX=${_tool}/ depend && \
 899                 make DIRPRFX=${_tool}/ all && \
 900                 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 901 .endfor
 902
 903 # build-tools: Build special purpose build tools.
 904 #
 905 # XXX we may be able to remove or consolidate this into bootstrap-tools
 906 # now that we have the native helper (.nx/.no) infrastructure.
 907 #
 908 # XXX we should separate this into new Makefile.inc2.
 909 # Just to prepare for reduction of ORDER: that slows down parallel crossworld.
 910
 911 # Make sure Makefile.inc1 logic is intact.
 912 .if !defined(WORLD_ALTCOMPILER)
 913 .warning undefined WORLD_ALTCOMPILER
 914 .endif
 915
 916 # gcc80 is now the default compiler.  See sys.mk for WORLD_ALTCOMPILER default
 917 # and this file for WORLD_CCVER.
 918 #
 919 _gcc47_cross= gnu/usr.bin/cc47
 920 _gcc80_cross= gnu/usr.bin/cc80
 921 _gcc_common_cross= lib/libz gnu/usr.bin/gmp gnu/usr.bin/mpfr gnu/usr.bin/mpc
 922
 923 .if !defined(NO_ALTCOMPILER)
 924 . if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47})
 925 _altcompiler_cross+= ${_gcc47_cross}
 926 . endif
 927 .endif
 928
 929 _basecompiler_cross= ${_gcc80_cross}
 930
 931 _custom_cross= libexec/customcc
 932 _binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
 933
 934 build-tools: build-tools-targets
 935         touch ${BTOOLSDEST}/.build_done
 936
 937 build-tools-targets: ${BTOOLSDIRS:S/^/btools-/}
 938
 939 #
 940 # cross-tools: Build cross-building tools
 941 #
 942
 943 CTOOLSDIRS= usr.bin/objformat
 944
 945 CTOOLSDIRS+=    ${_binutils} \
 946                 ${_gcc_common_cross} \
 947                 ${_altcompiler_cross} \
 948                 ${_basecompiler_cross} ${_custom_cross}
 949
 950 cross-tools: cross-tools-targets
 951         touch ${CTOOLSDEST}/.cross_done
 952
 953 cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/}
 954
 955 .for _tool in ${CTOOLSDIRS}
 956 ctools-${_tool}!
 957         ${ECHODIR} "===> ${_tool} (cross-tools)"; \
 958                 cd ${.CURDIR}/${_tool}; \
 959                 make DIRPRFX=${_tool}/ obj && \
 960                 make DIRPRFX=${_tool}/ depend && \
 961                 make DIRPRFX=${_tool}/ all && \
 962                 make DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
 963 .endfor
 964
 965 #
 966 # hierarchy - ensure that all the needed directories are present
 967 #
 968 hierarchy:
 969         cd ${.CURDIR}/etc;              make distrib-dirs
 970
 971 #
 972 # libraries - build all libraries, and install them under ${DESTDIR}.
 973 #
 974 # The list of libraries with dependents (${_prebuild_libs}) and their
 975 # interdependencies (__L) are built automatically by the
 976 # ${.CURDIR}/tools/make_libdeps.sh script.
 977 #
 978 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
 979 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
 980 #
 981 libraries:
 982         cd ${.CURDIR}; \
 983             HOST_CCVER=${HOST_CCVER} CCVER=gcc80 \
 984                 make -f Makefile.inc1 _startup_libs80 -DSYSBUILD -DLIBGCC_ONLY;
 985 .if !defined(NO_ALTCOMPILER)
 986 . if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47})
 987         cd ${.CURDIR}; \
 988             HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \
 989                 make -f Makefile.inc1 _startup_libs47 -DSYSBUILD -DLIBGCC_ONLY;
 990 . endif
 991 .endif
 992         cd ${.CURDIR}; \
 993             make -f Makefile.inc1 _startup_libs -DSYSBUILD && \
 994             make -f Makefile.inc1 _prebuild_libs -DSYSBUILD && \
 995             make -f Makefile.inc1 _generic_libs -DSYSBUILD && \
 996             touch ${WORLDDEST}/.libraries_done
 997
 998 # These dependencies are not automatically generated:
 999 #
1000 # gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
1001 # shared libraries for ELF.  The target for _startup_libsXX is
1002 # specifically built using gccXX.
1003 #
1004 _startup_libs47=        gnu/usr.bin/cc47/cc_prep \
1005                         gnu/usr.bin/cc47/cc_tools \
1006                         gnu/lib/gcc47/csu \
1007                         gnu/lib/gcc47/libgcc \
1008                         gnu/lib/gcc47/libgcc_eh \
1009                         gnu/lib/gcc47/libgcc_pic
1010
1011 _startup_libs80=        gnu/usr.bin/cc80/cc_prep \
1012                         gnu/usr.bin/cc80/cc_tools \
1013                         gnu/lib/gcc80/csu \
1014                         gnu/lib/gcc80/libgcc \
1015                         gnu/lib/gcc80/libgcc_eh \
1016                         gnu/lib/gcc80/libgcc_pic
1017
1018 .if !defined(NO_ALTCOMPILER)
1019 . if defined(WORLD_ALTCOMPILER) && (${WORLD_ALTCOMPILER} == "all" || ${WORLD_ALTCOMPILER:Mgcc47})
1020 _startup_libs_alt+=     _startup_libs47
1021 . endif
1022 .endif
1023
1024 _startup_libs_base=     _startup_libs80
1025
1026 _startup_libs=          lib/csu lib/libc lib/libc_rtld
1027 lib/libc__L: lib/csu__L
1028
1029 _prebuild_libs=         lib/libbz2 lib/liblzma lib/libz
1030 _prebuild_libs+=        lib/libutil
1031
1032 _prebuild_libs+=        lib/libelf
1033 _prebuild_libs+=        lib/libpcap
1034
1035 _generic_libs=  gnu/lib
1036
1037 _prebuild_libs+= lib/libcrypt lib/libncurses/libncurses
1038
1039 _generic_libs+= lib
1040
1041 _prebuild_libs+=        lib/librecrypto lib/libressl
1042 lib/libressl__L: lib/librecrypto__L
1043
1044 _prebuild_libs+=        lib/libssh
1045 lib/libssh__L: lib/librecrypto__L lib/libutil__L lib/libz__L
1046
1047 _prebuild_libs+=        lib/libradius
1048 lib/libradius__L: lib/librecrypto__L
1049
1050 _prebuild_libs+= lib/libsbuf lib/libtacplus lib/libm \
1051                 lib/libpam/libpam lib/libypclnt lib/lib${THREAD_LIB} \
1052                 lib/libpthread lib/libprop
1053
1054 _generic_libs+= usr.bin/flex/lib
1055
1056 .for _alib in ${_startup_libs_alt} ${_startup_libs_base}
1057 __startup_alibs+= ${${_alib}}
1058 .endfor
1059
1060 .for _lib in ${__startup_alibs} \
1061                 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
1062 ${_lib}__L: .PHONY
1063 .if exists(${.CURDIR}/${_lib})
1064         @${ECHODIR} "===> ${_lib}"; \
1065                 cd ${.CURDIR}/${_lib}; \
1066                 echo "STEP DEP ${_lib}" && \
1067                 make DIRPRFX=${_lib}/ depend && \
1068                 echo "STEP ALL ${_lib}" && \
1069                 make DIRPRFX=${_lib}/ all && \
1070                 echo "STEP INSTALL ${_lib}" && \
1071                 make DIRPRFX=${_lib}/ install && \
1072                 echo "STEP DONE ${_lib}";
1073 .else
1074 .warning missing ${.CURDIR}/${_lib} directory.
1075 .endif
1076 .endfor
1077
1078 _startup_libs: ${_startup_libs:S/$/__L/}
1079 .for _alib in ${_startup_libs_alt} ${_startup_libs_base}
1080 ${_alib}: ${${_alib}:C/$/__L/}
1081 .endfor
1082 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
1083 _generic_libs: ${_generic_libs:S/$/__L/}
1084
1085 # library targets must be ordered because there are inter-library
1086 # races (e.g. generation of tconfig.h)
1087 #
1088 .for _alib in ${_startup_libs_base} ${_startup_libs_alt}
1089 .ORDER: ${${_alib}:C/$/__L/}
1090 .endfor
1091
1092 # uncomment if there are missing dependencies
1093 .if 0
1094 .ORDER: ${_prebuild_libs:S/$/__L/}
1095 # we can disable this one, no lib/* depend on libstdc++
1096 .ORDER: ${_generic_libs:S/$/__L/}
1097 .endif
1098
1099 .for __target in clean cleandepend cleandir obj depend includes
1100 .for entry in ${SUBDIR}
1101 ${entry}.${__target}__D: .PHONY
1102         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
1103                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
1104                 edir=${entry}.${MACHINE_ARCH}; \
1105                 cd ${.CURDIR}/$${edir}; \
1106         else \
1107                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
1108                 edir=${entry}; \
1109                 cd ${.CURDIR}/$${edir}; \
1110         fi; \
1111         make ${__target} DIRPRFX=${DIRPRFX}$${edir}/
1112 .endfor
1113 par-${__target}: ${SUBDIR:C/$/.${__target}__D/}
1114 .ORDER: ${SUBDIR:C/$/.${__target}__D/}
1115 .endfor
1116 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
1117
1118 # The wmake target is used by /usr/bin/wmake to run make in a
1119 # world build environment.
1120 #
1121 wmake:
1122         @echo '${WMAKEENV} make ${WMAKE_ARGS} -DSYSBUILD'
1123
1124 wmakeenv:
1125         @echo '${WMAKEENV} /bin/sh'
1126
1127 bmake:
1128         @echo '${BMAKEENV} make ${BMAKE_ARGS} -DSYSBUILD'
1129
1130 bmakeenv:
1131         @echo '${BMAKEENV} /bin/sh'
1132
1133 tmake:
1134         @echo '${TMAKEENV} make ${TMAKE_ARGS} -DSYSBUILD'
1135
1136 tmakeenv:
1137         @echo '${TMAKEENV} /bin/sh'
1138
1139 xmake:
1140         @echo '${XMAKEENV} make ${XMAKE_ARGS} -DSYSBUILD'
1141
1142 xmakeenv:
1143         @echo '${XMAKEENV} /bin/sh'
1144
1145 backupworld: backup-clean
1146         @mkdir -p ${WORLD_BACKUP}
1147 .if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1148      exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1149      exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1150         tar -czf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1151                 --options gzip:compression-level=1 \
1152                 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1153 .endif
1154
1155 backupworld-auto:
1156 .if !defined(NO_BACKUP)
1157         rm -f ${AUTO_BACKUP}/binaries.tar.gz
1158         @mkdir -p ${AUTO_BACKUP}
1159 .if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1160      exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1161      exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1162         /usr/bin/tar -czf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1163                 --options gzip:compression-level=1 \
1164                 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1165 .endif
1166 .endif
1167
1168 backup-auto-clean:
1169         rm -f ${AUTO_BACKUP}/binaries.tar.gz
1170
1171 backup-clean:
1172         rm -f ${WORLD_BACKUP}/binaries.tar.gz
1173
1174 restoreworld:
1175 .if !exists(${WORLD_BACKUP}/binaries.tar.gz)
1176         @echo "There does not seem to be a valid archive present."
1177 .else
1178         @echo "Restoring system binaries from manual backup archive..."
1179         @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1180                 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1181                 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1182         tar -xzf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1183 .endif
1184
1185 restoreworld-auto:
1186 .if !exists(${AUTO_BACKUP}/binaries.tar.gz)
1187         @echo "There does not seem to be a valid archive present."
1188 .else
1189         @echo "Restoring system binaries from auto-backup archive..."
1190         @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1191                 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1192                 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1193         tar -xzf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1194 .endif
1195
1196 # Take advantage of bmake error response
1197 #
1198 MAKE_PRINT_VAR_ON_ERROR= \
1199         .CURDIR \
1200         .OBJDIR \
1201         .TARGETS \
1202         .ERROR_TARGET \
1203         .MAKE.LEVEL \
1204         .MAKE.MODE \
1205         PATH \
1206         LD_LIBRARY_PATH \
1207         MACHINE_ARCH \
1208         MACHINE \
1209         MAKEFILE \
1210         MAKESYSPATH \
1211         MAKEOBJDIRPREFIX \
1212         WORLD_ALTCOMPILER \
1213         DESTDIR \
1214         SHELL .SHELL
1215 .if ${.MAKE.LEVEL} > 0
1216 MAKE_PRINT_VAR_ON_ERROR+= .MAKE.MAKEFILES .PATH
1217 .endif
1218
1219 .include <bsd.subdir.mk>