2 * Copyright (c) 2004 John Baldwin <jhb@FreeBSD.org>
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. Neither the name of the author nor the names of any co-contributors
14 * may be used to endorse or promote products derived from this software
15 * without specific prior written permission.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * The ELCR is a register that controls the trigger mode and polarity of
32 * EISA and ISA interrupts. In FreeBSD 3.x and 4.x, the ELCR was only
33 * consulted for determining the appropriate trigger mode of EISA
34 * interrupts when using an APIC. However, it seems that almost all
35 * systems that include PCI also include an ELCR that manages the ISA
36 * IRQs 0 through 15. Thus, we check for the presence of an ELCR on
37 * every machine by checking to see if the values found at bootup are
38 * sane. Note that the polarity of ISA and EISA IRQs are linked to the
39 * trigger mode. All edge triggered IRQs use active-hi polarity, and
40 * all level triggered interrupts use active-lo polarity.
42 * The format of the ELCR is simple: it is a 16-bit bitmap where bit 0
43 * controls IRQ 0, bit 1 controls IRQ 1, etc. If the bit is zero, the
44 * associated IRQ is edge triggered. If the bit is one, the IRQ is
48 #include <sys/param.h>
50 #include <sys/systm.h>
51 #include <sys/kernel.h>
53 #include <machine_base/icu/elcr_var.h>
55 #define ELCR_PORT 0x4d0
56 #define ELCR_MASK(irq) (1 << (irq))
59 static int elcr_status;
62 * Check to see if we have what looks like a valid ELCR. We do this by
63 * verifying that IRQs 0, 1, 2, and 13 are all edge triggered.
70 TUNABLE_INT_FETCH("hw.elcr_disable", &disable);
74 elcr_status = inb(ELCR_PORT) | inb(ELCR_PORT + 1) << 8;
75 if ((elcr_status & (ELCR_MASK(0) | ELCR_MASK(1) | ELCR_MASK(2) |
76 ELCR_MASK(8) | ELCR_MASK(13))) != 0)
82 * Returns 1 for level trigger, 0 for edge.
85 elcr_read_trigger(int irq)
87 KASSERT(elcr_found, ("%s: no ELCR was found!", __func__));
88 KASSERT(irq <= 15, ("%s: invalid IRQ %u", __func__, irq));
89 if (elcr_status & ELCR_MASK(irq))
90 return (INTR_TRIGGER_LEVEL);
92 return (INTR_TRIGGER_EDGE);
96 * Set the trigger mode for a specified IRQ. Mode of 0 means edge triggered,
97 * and a mode of 1 means level triggered.
100 elcr_write_trigger(int irq, enum intr_trigger trigger)
104 KASSERT(elcr_found, ("%s: no ELCR was found!", __func__));
105 KASSERT(irq <= 15, ("%s: invalid IRQ %u", __func__, irq));
106 if (trigger == INTR_TRIGGER_LEVEL)
107 new_status = elcr_status | ELCR_MASK(irq);
109 new_status = elcr_status & ~ELCR_MASK(irq);
110 if (new_status == elcr_status)
112 elcr_status = new_status;
114 outb(ELCR_PORT + 1, elcr_status >> 8);
116 outb(ELCR_PORT, elcr_status & 0xff);
122 KASSERT(elcr_found, ("%s: no ELCR was found!", __func__));
123 outb(ELCR_PORT, elcr_status & 0xff);
124 outb(ELCR_PORT + 1, elcr_status >> 8);
136 kprintf("ELCR Found. ISA IRQs programmed as:\n");
137 for (i = 0; i < 16; i++)
140 for (i = 0; i < 16; i++)
141 if (elcr_status & ELCR_MASK(i))