sbin/hammer2/main.c

   1 /*
   2  * Copyright (c) 2011-2012 The DragonFly Project.  All rights reserved.
   3  *
   4  * This code is derived from software contributed to The DragonFly Project
   5  * by Matthew Dillon <dillon@dragonflybsd.org>
   6  * by Venkatesh Srinivas <vsrinivas@dragonflybsd.org>
   7  *
   8  * Redistribution and use in source and binary forms, with or without
   9  * modification, are permitted provided that the following conditions
  10  * are met:
  11  *
  12  * 1. Redistributions of source code must retain the above copyright
  13  *    notice, this list of conditions and the following disclaimer.
  14  * 2. Redistributions in binary form must reproduce the above copyright
  15  *    notice, this list of conditions and the following disclaimer in
  16  *    the documentation and/or other materials provided with the
  17  *    distribution.
  18  * 3. Neither the name of The DragonFly Project nor the names of its
  19  *    contributors may be used to endorse or promote products derived
  20  *    from this software without specific, prior written permission.
  21  *
  22  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  23  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  24  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  25  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
  26  * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  27  * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
  28  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
  30  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  31  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
  32  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  33  * SUCH DAMAGE.
  34  */
  35
  36 #include "hammer2.h"
  37
  38 int DebugOpt;
  39 int VerboseOpt;
  40 int QuietOpt;
  41 int NormalExit = 1;     /* if set to 0 main() has to pthread_exit() */
  42 int RecurseOpt;
  43 int ForceOpt;
  44
  45 static void usage(int code);
  46
  47 int
  48 main(int ac, char **av)
  49 {
  50         const char *sel_path = NULL;
  51         const char *uuid_str = NULL;
  52         const char *arg;
  53         int pfs_type = HAMMER2_PFSTYPE_NONE;
  54         int all_opt = 0;
  55         int ecode = 0;
  56         int ch;
  57
  58         srandomdev();
  59         signal(SIGPIPE, SIG_IGN);
  60         dmsg_crypto_setup();
  61
  62         /*
  63          * Core options
  64          */
  65         while ((ch = getopt(ac, av, "adfrqs:t:u:v")) != -1) {
  66                 switch(ch) {
  67                 case 'a':
  68                         all_opt = 1;
  69                         break;
  70                 case 'd':
  71                         if (DebugOpt)
  72                                 ++DMsgDebugOpt;
  73                         DebugOpt = 1;
  74                         break;
  75                 case 'f':
  76                         ForceOpt = 1;
  77                         break;
  78                 case 'r':
  79                         RecurseOpt = 1;
  80                         break;
  81                 case 's':
  82                         sel_path = optarg;
  83                         break;
  84                 case 't':
  85                         /*
  86                          * set node type for mkpfs
  87                          */
  88                         if (strcasecmp(optarg, "CACHE") == 0) {
  89                                 pfs_type = HAMMER2_PFSTYPE_CACHE;
  90                         } else if (strcasecmp(optarg, "DUMMY") == 0) {
  91                                 pfs_type = HAMMER2_PFSTYPE_DUMMY;
  92                         } else if (strcasecmp(optarg, "SLAVE") == 0) {
  93                                 pfs_type = HAMMER2_PFSTYPE_SLAVE;
  94                         } else if (strcasecmp(optarg, "SOFT_SLAVE") == 0) {
  95                                 pfs_type = HAMMER2_PFSTYPE_SOFT_SLAVE;
  96                         } else if (strcasecmp(optarg, "SOFT_MASTER") == 0) {
  97                                 pfs_type = HAMMER2_PFSTYPE_SOFT_MASTER;
  98                         } else if (strcasecmp(optarg, "MASTER") == 0) {
  99                                 pfs_type = HAMMER2_PFSTYPE_MASTER;
 100                         } else {
 101                                 fprintf(stderr, "-t: Unrecognized node type\n");
 102                                 usage(1);
 103                         }
 104                         break;
 105                 case 'u':
 106                         /*
 107                          * set uuid for mkpfs, else one will be generated
 108                          * (required for all except the MASTER node_type)
 109                          */
 110                         uuid_str = optarg;
 111                         break;
 112                 case 'v':
 113                         if (QuietOpt)
 114                                 --QuietOpt;
 115                         else
 116                                 ++VerboseOpt;
 117                         break;
 118                 case 'q':
 119                         if (VerboseOpt)
 120                                 --VerboseOpt;
 121                         else
 122                                 ++QuietOpt;
 123                         break;
 124                 default:
 125                         fprintf(stderr, "Unknown option: %c\n", ch);
 126                         usage(1);
 127                         /* not reached */
 128                         break;
 129                 }
 130         }
 131
 132         /*
 133          * Adjust, then process the command
 134          */
 135         ac -= optind;
 136         av += optind;
 137         if (ac < 1) {
 138                 fprintf(stderr, "Missing command\n");
 139                 usage(1);
 140                 /* not reached */
 141         }
 142
 143         if (strcmp(av[0], "connect") == 0) {
 144                 /*
 145                  * Add cluster connection
 146                  */
 147                 if (ac < 2) {
 148                         fprintf(stderr, "connect: missing argument\n");
 149                         usage(1);
 150                 }
 151                 ecode = cmd_remote_connect(sel_path, av[1]);
 152         } else if (strcmp(av[0], "chaindump") == 0) {
 153                 if (ac < 2)
 154                         ecode = cmd_chaindump(".");
 155                 else
 156                         ecode = cmd_chaindump(av[1]);
 157         } else if (strcmp(av[0], "debugspan") == 0) {
 158                 /*
 159                  * Debug connection to the target hammer2 service and run
 160                  * the CONN/SPAN protocol.
 161                  */
 162                 if (ac < 2) {
 163                         fprintf(stderr, "debugspan: requires hostname\n");
 164                         usage(1);
 165                 }
 166                 ecode = cmd_debugspan(av[1]);
 167         } else if (strcmp(av[0], "disconnect") == 0) {
 168                 /*
 169                  * Remove cluster connection
 170                  */
 171                 if (ac < 2) {
 172                         fprintf(stderr, "disconnect: missing argument\n");
 173                         usage(1);
 174                 }
 175                 ecode = cmd_remote_disconnect(sel_path, av[1]);
 176         } else if (strcmp(av[0], "hash") == 0) {
 177                 ecode = cmd_hash(ac - 1, (const char **)(void *)&av[1]);
 178         } else if (strcmp(av[0], "info") == 0) {
 179                 ecode = cmd_info(ac - 1, (const char **)(void *)&av[1]);
 180         } else if (strcmp(av[0], "mountall") == 0) {
 181                 ecode = cmd_mountall(ac - 1, (const char **)(void *)&av[1]);
 182         } else if (strcmp(av[0], "status") == 0) {
 183                 /*
 184                  * Get status of PFS and its connections (-a for all PFSs)
 185                  */
 186                 if (ac < 2) {
 187                         ecode = cmd_remote_status(sel_path, all_opt);
 188                 } else {
 189                         int i;
 190
 191                         for (i = 1; i < ac; ++i)
 192                                 ecode = cmd_remote_status(av[i], all_opt);
 193                 }
 194         } else if (strcmp(av[0], "pfs-clid") == 0) {
 195                 /*
 196                  * Print cluster id (uuid) for specific PFS
 197                  */
 198                 if (ac < 2) {
 199                         fprintf(stderr, "pfs-clid: requires name\n");
 200                         usage(1);
 201                 }
 202                 ecode = cmd_pfs_getid(sel_path, av[1], 0);
 203         } else if (strcmp(av[0], "pfs-fsid") == 0) {
 204                 /*
 205                  * Print private id (uuid) for specific PFS
 206                  */
 207                 if (ac < 2) {
 208                         fprintf(stderr, "pfs-fsid: requires name\n");
 209                         usage(1);
 210                 }
 211                 ecode = cmd_pfs_getid(sel_path, av[1], 1);
 212         } else if (strcmp(av[0], "pfs-list") == 0) {
 213                 /*
 214                  * List all PFSs
 215                  */
 216                 if (ac >= 2) {
 217                         ecode = cmd_pfs_list(ac - 1,
 218                                              (const char **)(void *)&av[1]);
 219                 } else {
 220                         ecode = cmd_pfs_list(1, &sel_path);
 221                 }
 222         } else if (strcmp(av[0], "pfs-create") == 0) {
 223                 /*
 224                  * Create new PFS using pfs_type
 225                  */
 226                 if (ac < 2) {
 227                         fprintf(stderr, "pfs-create: requires name\n");
 228                         usage(1);
 229                 }
 230                 ecode = cmd_pfs_create(sel_path, av[1], pfs_type, uuid_str);
 231         } else if (strcmp(av[0], "pfs-delete") == 0) {
 232                 /*
 233                  * Delete a PFS by name
 234                  */
 235                 if (ac < 2) {
 236                         fprintf(stderr, "pfs-delete: requires name\n");
 237                         usage(1);
 238                 }
 239                 ecode = cmd_pfs_delete(sel_path, av[1]);
 240         } else if (strcmp(av[0], "snapshot") == 0) {
 241                 /*
 242                  * Create snapshot with optional pfs-type and optional
 243                  * label override.
 244                  */
 245                 if (ac > 3) {
 246                         fprintf(stderr, "pfs-snapshot: too many arguments\n");
 247                         usage(1);
 248                 }
 249                 switch(ac) {
 250                 case 1:
 251                         ecode = cmd_pfs_snapshot(sel_path, NULL, NULL);
 252                         break;
 253                 case 2:
 254                         ecode = cmd_pfs_snapshot(sel_path, av[1], NULL);
 255                         break;
 256                 case 3:
 257                         ecode = cmd_pfs_snapshot(sel_path, av[1], av[2]);
 258                         break;
 259                 }
 260         } else if (strcmp(av[0], "service") == 0) {
 261                 /*
 262                  * Start the service daemon.  This daemon accepts
 263                  * connections from local and remote clients, handles
 264                  * the security handshake, and manages the core messaging
 265                  * protocol.
 266                  */
 267                 ecode = cmd_service();
 268         } else if (strcmp(av[0], "stat") == 0) {
 269                 ecode = cmd_stat(ac - 1, (const char **)(void *)&av[1]);
 270         } else if (strcmp(av[0], "leaf") == 0) {
 271                 /*
 272                  * Start the management daemon for a specific PFS.
 273                  *
 274                  * This will typically connect to the local master node
 275                  * daemon, register the PFS, and then pass its side of
 276                  * the socket descriptor to the kernel HAMMER2 VFS via an
 277                  * ioctl().  The process and/or thread context remains in the
 278                  * kernel until the PFS is unmounted or the connection is
 279                  * lost, then returns from the ioctl.
 280                  *
 281                  * It is possible to connect directly to a remote master node
 282                  * instead of the local master node in situations where
 283                  * encryption is not desired or no local master node is
 284                  * desired.  This is not recommended because it represents
 285                  * a single point of failure for the PFS's communications.
 286                  *
 287                  * Direct kernel<->kernel communication between HAMMER2 VFSs
 288                  * is theoretically possible for directly-connected
 289                  * registrations (i.e. where the spanning tree is degenerate),
 290                  * but not recommended.  We specifically try to reduce the
 291                  * complexity of the HAMMER2 VFS kernel code.
 292                  */
 293                 ecode = cmd_leaf(sel_path);
 294         } else if (strcmp(av[0], "shell") == 0) {
 295                 /*
 296                  * Connect to the command line monitor in the hammer2 master
 297                  * node for the machine using HAMMER2_DBG_SHELL messages.
 298                  */
 299                 ecode = cmd_shell((ac < 2) ? NULL : av[1]);
 300         } else if (strcmp(av[0], "rsainit") == 0) {
 301                 /*
 302                  * Initialize a RSA keypair.  If no target directory is
 303                  * specified we default to "/etc/hammer2".
 304                  */
 305                 arg = (ac < 2) ? HAMMER2_DEFAULT_DIR : av[1];
 306                 ecode = cmd_rsainit(arg);
 307         } else if (strcmp(av[0], "rsaenc") == 0) {
 308                 /*
 309                  * Encrypt the input symmetrically by running it through
 310                  * the specified public and/or private key files.
 311                  *
 312                  * If no key files are specified data is encoded using
 313                  * "/etc/hammer2/rsa.pub".
 314                  *
 315                  * WARNING: no padding is added, data stream must contain
 316                  *          random padding for this to be secure.
 317                  *
 318                  * Used for debugging only
 319                  */
 320                 if (ac == 1) {
 321                         const char *rsapath = HAMMER2_DEFAULT_DIR "/rsa.pub";
 322                         ecode = cmd_rsaenc(&rsapath, 1);
 323                 } else {
 324                         ecode = cmd_rsaenc((const char **)(void *)&av[1],
 325                                            ac - 1);
 326                 }
 327         } else if (strcmp(av[0], "rsadec") == 0) {
 328                 /*
 329                  * Decrypt the input symmetrically by running it through
 330                  * the specified public and/or private key files.
 331                  *
 332                  * If no key files are specified data is decoded using
 333                  * "/etc/hammer2/rsa.prv".
 334                  *
 335                  * WARNING: no padding is added, data stream must contain
 336                  *          random padding for this to be secure.
 337                  *
 338                  * Used for debugging only
 339                  */
 340                 if (ac == 1) {
 341                         const char *rsapath = HAMMER2_DEFAULT_DIR "/rsa.prv";
 342                         ecode = cmd_rsadec(&rsapath, 1);
 343                 } else {
 344                         ecode = cmd_rsadec((const char **)(void *)&av[1],
 345                                            ac - 1);
 346                 }
 347         } else if (strcmp(av[0], "show") == 0) {
 348                 /*
 349                  * Raw dump of filesystem.  Use -v to check all crc's, and
 350                  * -vv to dump bulk file data.
 351                  */
 352                 if (ac != 2) {
 353                         fprintf(stderr, "show: requires device path\n");
 354                         usage(1);
 355                 } else {
 356                         cmd_show(av[1], 0);
 357                 }
 358         } else if (strcmp(av[0], "freemap") == 0) {
 359                 /*
 360                  * Raw dump of freemap.  Use -v to check all crc's, and
 361                  * -vv to dump bulk file data.
 362                  */
 363                 if (ac != 2) {
 364                         fprintf(stderr, "freemap: requires device path\n");
 365                         usage(1);
 366                 } else {
 367                         cmd_show(av[1], 1);
 368                 }
 369         } else if (strcmp(av[0], "setcomp") == 0) {
 370                 if (ac < 3) {
 371                         /*
 372                          * Missing compression method and at least one
 373                          * path.
 374                          */
 375                         fprintf(stderr,
 376                                 "setcomp: requires compression method and"
 377                                 "directory/file path\n");
 378                         usage(1);
 379                 } else {
 380                         /*
 381                          * Multiple paths may be specified
 382                          */
 383                         ecode = cmd_setcomp(av[1], &av[2]);
 384                 }
 385         } else if (strcmp(av[0], "setcheck") == 0) {
 386                 if (ac < 3) {
 387                         /*
 388                          * Missing compression method and at least one
 389                          * path.
 390                          */
 391                         fprintf(stderr,
 392                                 "setcheck: requires check code method and"
 393                                 "directory/file path\n");
 394                         usage(1);
 395                 } else {
 396                         /*
 397                          * Multiple paths may be specified
 398                          */
 399                         ecode = cmd_setcheck(av[1], &av[2]);
 400                 }
 401         } else if (strcmp(av[0], "clrcheck") == 0) {
 402                 ecode = cmd_setcheck("none", &av[1]);
 403         } else if (strcmp(av[0], "setcrc32") == 0) {
 404                 ecode = cmd_setcheck("crc32", &av[1]);
 405         } else if (strcmp(av[0], "setcrc64") == 0) {
 406                 ecode = cmd_setcheck("crc64", &av[1]);
 407         } else if (strcmp(av[0], "setsha192") == 0) {
 408                 ecode = cmd_setcheck("sha192", &av[1]);
 409         } else if (strcmp(av[0], "printinode") == 0) {
 410                 if (ac != 2) {
 411                         fprintf(stderr,
 412                                 "printinode: requires directory/file path\n");
 413                         usage(1);
 414                 } else {
 415                         print_inode(av[1]);
 416                 }
 417         } else if (strcmp(av[0], "bulkfree") == 0) {
 418                 if (ac != 2) {
 419                         fprintf(stderr,
 420                                 "bulkfree: requires path to mount\n");
 421                         usage(1);
 422                 } else {
 423                         ecode = cmd_bulkfree(av[1]);
 424                 }
 425         } else {
 426                 fprintf(stderr, "Unrecognized command: %s\n", av[0]);
 427                 usage(1);
 428         }
 429
 430         /*
 431          * In DebugMode we may wind up starting several pthreads in the
 432          * original process, in which case we have to let them run and
 433          * not actually exit.
 434          */
 435         if (NormalExit) {
 436                 return (ecode);
 437         } else {
 438                 pthread_exit(NULL);
 439                 _exit(2);       /* NOT REACHED */
 440         }
 441 }
 442
 443 static
 444 void
 445 usage(int code)
 446 {
 447         fprintf(stderr,
 448                 "hammer2 [options] command...\n"
 449                 "    -s path            Select filesystem\n"
 450                 "    -t type            PFS type for pfs-create\n"
 451                 "    -u uuid            uuid for pfs-create\n"
 452                 "\n"
 453                 "    connect <target>             "
 454                         "Add cluster link\n"
 455                 "    disconnect <target>          "
 456                         "Del cluster link\n"
 457                 "    hash filename*               "
 458                         "Print directory hash\n"
 459                 "    info [devpath...]            "
 460                         "Info on all offline or online H2 partitions\n"
 461                 "    mountall [devpath...]        "
 462                         "Mount @LOCAL for all H2 partitions\n"
 463                 "    status [<path>...]           "
 464                         "Report active cluster status\n"
 465                 "    pfs-list [<path>...]         "
 466                         "List PFSs\n"
 467                 "    pfs-clid <label>             "
 468                         "Print cluster id for specific PFS\n"
 469                 "    pfs-fsid <label>             "
 470                         "Print private id for specific PFS\n"
 471                 "    pfs-create <label>           "
 472                         "Create a PFS\n"
 473                 "    pfs-delete <label>           "
 474                         "Destroy a PFS\n"
 475                 "    snapshot <path> [<label>]           "
 476                         "Snapshot a PFS or directory\n"
 477                 "    service                      "
 478                         "Start service daemon\n"
 479                 "    stat [<path>]                "
 480                         "Return inode quota & config\n"
 481                 "    leaf                         "
 482                         "Start pfs leaf daemon\n"
 483                 "    shell [<host>]               "
 484                         "Connect to debug shell\n"
 485                 "    debugspan <target>           "
 486                         "Connect to target, run CONN/SPAN\n"
 487                 "    rsainit                      "
 488                         "Initialize rsa fields\n"
 489                 "    show devpath                 "
 490                         "Raw hammer2 media dump\n"
 491                 "    freemap devpath              "
 492                         "Raw hammer2 media dump\n"
 493                 "    setcomp comp[:level] path... "
 494                         "Set comp algo {none, autozero, lz4, zlib} & level\n"
 495                 "    setcheck check path...       "
 496                         "Set check algo {none, crc32, crc64, sha192}\n"
 497                 "    clrcheck path...             "
 498                         "Clear check code override\n"
 499                 "    setcrc32 path...             "
 500                         "Set check algo to crc32\n"
 501                 "    setcrc64 path...             "
 502                         "Set check algo to crc64\n"
 503                 "    setsha192 path...            "
 504                         "Set check algo to sha192\n"
 505                 "    bulkfree path...             "
 506                         "Run bulkfree pass\n"
 507         );
 508         exit(code);
 509 }