2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
4 # Build-time options are documented in make.conf(5).
6 # The intended user-driven targets are:
8 # buildworld - rebuild *everything*, including glue to help do upgrades
9 # quickworld - skip the glue and do a depend+build on the meat
10 # realquickworld - skip the glue and depend stages and just build the meat
11 # crossworld - only build the glue (particularly the cross-build environment)
12 # installworld- install everything built by "buildworld"
13 # backupworld - copies /bin /sbin /usr/bin /usr/sbin /usr/lib /usr/libexec
14 # to manual backup dir
15 # restoreworld- installs binaries from manual backup dir to world
16 # restoreworld-auto - installs binaries from auto-backup dir to world
17 # most - build user commands, no libraries or include files
18 # installmost - install user commands, no libraries or include files
19 # backup-clean - delete backup from manual backup dir
20 # backup-auto-clean - delete backup from auto-backup dir
22 # Standard targets (not defined here) are documented in the makefiles in
23 # /usr/share/mk. These include:
24 # obj depend all install clean cleandepend cleanobj
26 # Put initial settings here.
29 # We must do share/info early so that installation of info `dir'
30 # entries works correctly. Do it first since it is less likely to
31 # grow dependencies on include and lib than vice versa.
32 .if exists(${.CURDIR}/share/info)
36 # We must do include and lib early so that the perl *.ph generation
37 # works correctly as it uses the header files installed by this.
38 .if exists(${.CURDIR}/include)
41 .if exists(${.CURDIR}/lib)
44 # This exists simply to ensure that the obj dir hierarchy is
45 # intact for nrelease, allowing the nrelease Makefile's to
46 # reference ${.OBJDIR}.
48 .if exists(${.CURDIR}/nrelease)
52 .if exists(${.CURDIR}/bin)
55 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
58 .if exists(${.CURDIR}/gnu)
61 .if exists(${.CURDIR}/libexec)
64 .if exists(${.CURDIR}/sbin)
67 .if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
70 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
73 .if exists(${.CURDIR}/sys)
76 .if exists(${.CURDIR}/usr.bin)
79 .if exists(${.CURDIR}/usr.sbin)
83 .if exists(${.CURDIR}/etc)
87 # These are last, since it is nice to at least get the base system
88 # rebuilt before you do them.
89 .if defined(LOCAL_DIRS)
90 .for _DIR in ${LOCAL_DIRS}
91 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
97 .if defined(SUBDIR_OVERRIDE)
98 SUBDIR= ${SUBDIR_OVERRIDE}
101 .if defined(NOCLEANDIR)
102 CLEANDIR= clean cleandepend
107 .if defined(NO_CLEAN)
111 # Object directory base in primary make. Note that when we rerun make
112 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
113 # subdirectory because the rest of the build system needs it that way.
114 # The original object directory base is saved in OBJTREE.
116 MAKEOBJDIRPREFIX?= /usr/obj
117 OBJTREE?= ${MAKEOBJDIRPREFIX}
119 # Used for stage installs and pathing
121 DESTDIRBASE:= ${OBJTREE}${.CURDIR}
123 # Remove DESTDIR from MAKEFLAGS. It is present in the environment
124 # anyhow, and we need to be able to override it for stage installs
125 .MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*}
127 # This section sets the tools used to build the world/kernel
130 WORLD_BINUTILSVER?= binutils224
132 # Set the backup parameters if they are not already defined
134 WORLD_BACKUP?= /var/backups/world_backup
135 AUTO_BACKUP?= ${OBJTREE}/world_backup/${DESTDIR}
137 TARGET_ARCH?= ${MACHINE_ARCH}
138 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
141 TARGET?= ${TARGET_ARCH}
144 BUILD_ARCH!= sysctl -n hw.machine_arch
146 # temporary until everybody has converted to x86_64
147 .if ${BUILD_ARCH} == "amd64"
151 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
152 .error To cross-build, set TARGET_ARCH.
156 # Backwards compatibility with older make's or older sys.mk's. make
157 # is expected to define MACHINE_PLATFORM.
159 .if !defined(MACHINE_PLATFORM)
160 MACHINE_PLATFORM= pc32
163 # XXX this is ugly and we need to come up with a nicer solution
164 .if !defined(TARGET_PLATFORM)
165 .if ${TARGET_ARCH} == "i386"
166 TARGET_PLATFORM= pc32
167 .elif ${TARGET_ARCH} == "x86_64"
168 TARGET_PLATFORM= pc64
170 .error Unknown target architecture.
174 THREAD_LIB?= thread_xu
175 .if ${THREAD_LIB} == "c_r"
176 .if defined(NO_LIBC_R)
177 .error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
181 # BTOOLS (Natively built) All non-cross-development tools that the
182 # main build needs. This includes things like 'mkdir' and 'rm'.
183 # We will not use the native system's exec path once we start
184 # on WORLD. (bootstrap-tools and build-tools or BTOOLS)
186 # CTOOLS (Natively built) Cross development tools which are specific
187 # to the target architecture.
189 # WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and
192 # MACHINE_PLATFORM Platform Architecture we are building on
193 # MACHINE Machine Architecture (usually the same as MACHINE_ARCH)
194 # MACHINE_ARCH Cpu Architecture we are building on
196 # TARGET_PLATFORM Platform Architecture we are building for
197 # TARGET Machine Architecture we are building for
198 # TARGET_ARCH Cpu Architecture we are building for
200 BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH}
201 CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
202 WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH}
204 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
205 # cross-tools stages to augment the existing command path to access newer
206 # versions of certain utilities such as 'patch' that the cross-tools stage
209 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
211 # The strict temporary command path contains all binaries required
212 # by the buildworld system after the cross-tools stage.
214 STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games:/usr/local/bin:/usr/pkg/bin
220 # Building a world goes through the following stages
222 # 1. bootstrap-tool stage [BMAKE]
223 # This stage is responsible for creating programs that
224 # are needed for backward compatibility reasons. They
225 # are not built as cross-tools.
226 # 2. build-tool stage [TMAKE]
227 # This stage is responsible for creating the object
228 # tree and building any tools that are needed during
230 # 3. cross-tool stage [XMAKE]
231 # This stage is responsible for creating any tools that
232 # are needed for cross-builds. A cross-compiler is one
234 # 4. world stage [WMAKE]
235 # This stage actually builds the world.
236 # 5. install stage (optional) [IMAKE]
237 # This stage installs a previously built world.
239 # In all cases we must carefully adjust the environment so the proper
240 # tools and header files are used.
242 # NOTE: The M4 environment variable is used by the [f]lex binary to
243 # override the location of the 'm4' binary. The override is
244 # needed for certain buildworld version transitions, specifically
245 # past a certain point in 3.3 because the older /usr/bin/m4 will
246 # generate output that will blow up the newer [f]lex/yacc/bison
250 # bootstrap-tool stage
252 BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
254 DESTDIR=${BTOOLSDEST} \
255 PATH=${BTOOLSPATH}:${PATH} \
256 M4=${BTOOLSDEST}/usr/bin/m4 \
257 INSTALL="sh ${.CURDIR}/tools/install.sh"
259 BMAKE= ${BMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
260 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
265 TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \
268 PATH=${BTOOLSPATH}:${PATH} \
269 M4=${BTOOLSDEST}/usr/bin/m4 \
270 INSTALL="sh ${.CURDIR}/tools/install.sh"
272 TMAKE= ${TMAKEENV} make -f Makefile.inc1 -DBOOTSTRAPPING \
273 -DNO_FORTRAN -DNOSHARED
277 # note: TOOLS_PREFIX points to the obj root holding the cross
278 # compiler binaries, while USRDATA_PREFIX points to the obj root
279 # holding the target environment (and also determines where cross-built
280 # libraries, crt*.o, and include files are installed).
282 XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \
284 DESTDIR=${CTOOLSDEST} \
285 INSTALL="sh ${.CURDIR}/tools/install.sh" \
286 TOOLS_PREFIX=${CTOOLSDEST} \
287 USRDATA_PREFIX=${WORLDDEST} \
288 M4=${BTOOLSDEST}/usr/bin/m4 \
289 PATH=${BTOOLSPATH}:${PATH}
291 XMAKE= ${XMAKEENV} make -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
292 -DBOOTSTRAPPING -DNOSHARED
294 # world stage, note the strict path and note that TOOLS_PREFIX is left
295 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
296 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
297 # for both binary and library paths, even though it is being compiled to
298 # WORLDDEST. None of the programs in the world stage are ever actually
299 # executed during the buildworld/installworld.
301 CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \
303 MACHINE_ARCH=${TARGET_ARCH} \
305 MACHINE_PLATFORM=${TARGET_PLATFORM} \
306 OBJFORMAT_PATH=${CTOOLSDEST} \
307 HOST_CCVER=${HOST_CCVER} \
308 CCVER=${WORLD_CCVER} \
309 LDVER=${WORLD_LDVER} \
310 BINUTILSVER=${WORLD_BINUTILSVER}
312 WMAKEENV= ${CROSSENV} \
313 DESTDIR=${WORLDDEST} \
314 INSTALL="sh ${.CURDIR}/tools/install.sh" \
315 M4=${BTOOLSDEST}/usr/bin/m4 \
316 PATH=${STRICTTMPPATH}
318 WMAKE= ${WMAKEENV} make -f Makefile.inc1
322 IMAKEENV= ${CROSSENV} \
323 PATH=${STRICTTMPPATH}
324 IMAKE= ${IMAKEENV} make -f Makefile.inc1
328 KMAKEENV= ${WMAKEENV}
332 # Attempt to rebuild the entire system, with reasonable chance of
333 # success, regardless of how old your existing system is.
335 _worldtmp: _cleantmp _mtreetmp
336 .ORDER: _cleantmp _mtreetmp
340 @echo "--------------------------------------------------------------"
341 @echo ">>> Rebuilding the temporary build tree"
342 @echo "--------------------------------------------------------------"
343 .if !defined(NOCLEAN)
344 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
346 # XXX - These two can depend on any header file.
347 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
348 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
352 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
353 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
354 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
355 -p ${_dir}/ > /dev/null
356 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
357 -p ${_dir}/usr > /dev/null
359 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
360 -p ${WORLDDEST}/usr/include > /dev/null
361 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
365 @echo "--------------------------------------------------------------"
366 @echo ">>> stage 1: bootstrap tools"
367 @echo "--------------------------------------------------------------"
368 cd ${.CURDIR}; ${BMAKE} bootstrap-tools
371 @echo "--------------------------------------------------------------"
372 @echo ">>> stage 2a: cleaning up the object tree"
373 @echo "--------------------------------------------------------------"
374 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
377 @echo "--------------------------------------------------------------"
378 @echo ">>> stage 2b: rebuilding the object tree"
379 @echo "--------------------------------------------------------------"
380 cd ${.CURDIR}; ${WMAKE} par-obj
383 @echo "--------------------------------------------------------------"
384 @echo ">>> stage 2c: build tools"
385 @echo "--------------------------------------------------------------"
386 cd ${.CURDIR}; ${TMAKE} build-tools
389 @echo "--------------------------------------------------------------"
390 @echo ">>> stage 3: cross tools"
391 @echo "--------------------------------------------------------------"
392 cd ${.CURDIR}; ${XMAKE} cross-tools
395 @echo "--------------------------------------------------------------"
396 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
397 @echo "--------------------------------------------------------------"
398 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
401 @echo "--------------------------------------------------------------"
402 @echo ">>> stage 4b: building libraries"
403 @echo "--------------------------------------------------------------"
404 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
407 @echo "--------------------------------------------------------------"
408 @echo ">>> stage 4c: make dependencies"
409 @echo "--------------------------------------------------------------"
410 cd ${.CURDIR}; ${WMAKE} par-depend
413 @echo "--------------------------------------------------------------"
414 @echo ">>> stage 4d: building everything.."
415 @echo "--------------------------------------------------------------"
416 cd ${.CURDIR}; ${WMAKE} all
418 # note: buildworld no longer depends on _cleanobj because we rm -rf the
419 # entire object tree and built the bootstrap tools in a different location.
421 # buildworld - build everything from scratch
422 # quickworld - skip the bootstrap, build, and cross-build steps
423 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
425 # note: we include _obj in realquickworld to prevent accidental creation
426 # of files in /usr/src.
429 .if !defined(SUBDIR_OVERRIDE)
430 WMAKE_TGTS+= _worldtmp _bootstrap-tools
432 WMAKE_TGTS+= _obj _build-tools
433 .if !defined(SUBDIR_OVERRIDE)
434 WMAKE_TGTS+= _cross-tools
436 WMAKE_TGTS+= _includes _libraries _depend everything
438 buildworld: ${WMAKE_TGTS}
440 quickworld: _mtreetmp _obj _includes _libraries _depend everything
442 realquickworld: _mtreetmp _obj _includes _libraries everything
444 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
446 .ORDER: ${WMAKE_TGTS}
447 .ORDER: _obj _includes
448 .ORDER: _mtreetmp _obj
449 .ORDER: installcheck backupworld-auto
454 # Checks to be sure system is ready for installworld
457 .if !defined(NO_SENDMAIL)
458 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
459 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
461 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
462 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
463 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; /usr/bin/false)
464 .if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
465 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; /usr/bin/false ; esac
471 # Backs up the current world if ${AUTO_BACKUP} is writable.
472 # Installs everything compiled by a 'buildworld'.
474 installworld: installcheck
475 -@mkdir -p ${AUTO_BACKUP} > /dev/null 2>&1
477 (touch ${AUTO_BACKUP}/.updating > /dev/null 2>&1 && \
478 ${IMAKE} backupworld-auto) || \
479 echo "Cannot write to ${AUTO_BACKUP} - world not backed up"
481 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
482 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
488 # If you have a build server, you can NFS mount the source and obj directories
489 # and do a 'make reinstall' on the *client* to install new binaries from the
490 # most recent server build.
493 @echo "--------------------------------------------------------------"
494 @echo ">>> Making hierarchy"
495 @echo "--------------------------------------------------------------"
496 cd ${.CURDIR}; make -f Makefile.inc1 hierarchy
498 @echo "--------------------------------------------------------------"
499 @echo ">>> Installing everything.."
500 @echo "--------------------------------------------------------------"
501 cd ${.CURDIR}; make -f Makefile.inc1 install
504 # buildkernel, nativekernel, quickkernel, and installkernel
506 # Which kernels to build and/or install is specified by setting
507 # KERNCONF. If not defined a GENERIC kernel is built/installed.
508 # Only the existing (depending TARGET) config files are used
509 # for building kernels and only the first of these is designated
510 # as the one being installed.
512 # You can specify INSTALLSTRIPPED=1 if you wish the installed
513 # kernel and modules to be stripped of its debug info (required
514 # symbols are left intact). You can specify INSTALLSTRIPPEDMODULES
515 # if you only want to strip the modules of their debug info. These
516 # only apply if you have DEBUG=-g in your kernel config or make line.
518 # Note that we have to use TARGET instead of TARGET_ARCH when
519 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
520 # be set to cross-build, we have to make sure TARGET is set
523 .if !defined(KERNCONF) && defined(KERNEL)
527 # XXX makeshift fix to build the right kernel for the (target) architecture
528 # We should configure this in the platform files somehow
529 .if ${TARGET_ARCH} == "i386"
532 KERNCONF?= X86_64_GENERIC
535 INSTKERNNAME?= kernel
537 KRNLSRCDIR= ${.CURDIR}/sys
538 KRNLCONFDIR= ${KRNLSRCDIR}/config
539 KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
540 KERNCONFDIR?= ${KRNLCONFDIR}
544 .for _kernel in ${KERNCONF}
545 .if exists(${KERNCONFDIR}/${_kernel})
546 BUILDKERNELS+= ${_kernel}
547 .if empty(INSTALLKERNEL)
548 INSTALLKERNEL= ${_kernel}
553 # kernel version numbers survive rm -rf
555 .for _kernel in ${BUILDKERNELS}
556 .if exists(${KRNLOBJDIR}/${_kernel}/version)
557 KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
564 # Builds all kernels defined by BUILDKERNELS.
567 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
568 echo "You must buildworld before buildkernel. If you wish"; \
569 echo "to build a kernel using native tools, config it manually"; \
570 echo "or use the nativekernel target if you are in a rush"; \
575 .for _kernel in ${BUILDKERNELS}
576 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
577 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
578 echo "The kernel was build using buildworld tools which no" ; \
579 echo "longer appear to exist, quickkernel failed!" ; \
586 .if empty(BUILDKERNELS)
587 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
588 @echo ">>> Did you move your kernel configs from i386/conf to config/?"
593 .if defined(KERNWARN)
594 @echo "--------------------------------------------------------------"
595 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
596 @echo "--------------------------------------------------------------"
601 # The buildkernel target rebuilds the specified kernels from scratch
602 # using the crossbuild tools generated by the last buildworld. It is
603 # the safest (but also the most time consuming) way to build a new kernel.
605 buildkernel: bk_tools bk_build_list bk_kernwarn
606 .for _kernel in ${BUILDKERNELS}
607 @echo "--------------------------------------------------------------"
608 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
609 @echo "--------------------------------------------------------------"
610 @echo "===> ${_kernel}"
611 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
612 rm -rf ${KRNLOBJDIR}/${_kernel}
614 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
615 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
616 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
618 mkdir -p ${KRNLOBJDIR}
619 .if !defined(NO_KERNELCONFIG)
621 PATH=${STRICTTMPPATH} \
622 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
623 ${KERNCONFDIR}/${_kernel}
625 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
626 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
628 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
629 .if !defined(NO_KERNELDEPEND)
630 cd ${KRNLOBJDIR}/${_kernel}; \
631 ${KMAKEENV} make KERNEL=${INSTKERNNAME} depend
633 cd ${KRNLOBJDIR}/${_kernel}; \
634 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
635 @echo "--------------------------------------------------------------"
636 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
637 @echo "--------------------------------------------------------------"
640 # The nativekernel target rebuilds the specified kernels from scratch
641 # using the system's standard compiler rather than using the crossbuild
642 # tools generated by the last buildworld. This is fairly safe if your
643 # system is reasonable up-to-date.
645 nativekernel: bk_build_list bk_kernwarn
646 .for _kernel in ${BUILDKERNELS}
647 @echo "--------------------------------------------------------------"
648 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
649 @echo "--------------------------------------------------------------"
650 @echo "===> ${_kernel}"
651 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
652 rm -rf ${KRNLOBJDIR}/${_kernel}
654 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
655 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
656 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
658 mkdir -p ${KRNLOBJDIR}
659 .if !defined(NO_KERNELCONFIG)
661 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
662 ${KERNCONFDIR}/${_kernel}
664 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
665 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
667 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
668 cd ${KRNLOBJDIR}/${_kernel}; \
669 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
670 make -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
671 .if !defined(NO_KERNELDEPEND)
672 cd ${KRNLOBJDIR}/${_kernel}; \
673 make KERNEL=${INSTKERNNAME} depend
675 cd ${KRNLOBJDIR}/${_kernel}; \
676 make KERNEL=${INSTKERNNAME} all
677 @echo "--------------------------------------------------------------"
678 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
679 @echo "--------------------------------------------------------------"
682 # The quickkernel target rebuilds the specified kernels as quickly
683 # as possible. It will use the native tools or the buildworld cross tools
684 # based on whether the kernel was originally generated via buildkernel or
685 # nativekernel. Config is rerun but the object hierarchy is not rebuilt,
686 # nor is the make depend step run.
688 quickkernel: maybe_bk_tools bk_build_list bk_kernwarn
689 .for _kernel in ${BUILDKERNELS}
690 @echo "--------------------------------------------------------------"
691 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
692 @echo "--------------------------------------------------------------"
693 @echo "===> ${_kernel}"
694 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
695 .if !defined(NO_KERNELCONFIG)
697 PATH=${STRICTTMPPATH} \
698 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
699 ${KERNCONFDIR}/${_kernel}
701 cd ${KRNLOBJDIR}/${_kernel}; \
702 ${KMAKEENV} make KERNEL=${INSTKERNNAME} all
704 .if !defined(NO_KERNELCONFIG)
706 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
707 ${KERNCONFDIR}/${_kernel}
709 cd ${KRNLOBJDIR}/${_kernel}; \
710 make KERNEL=${INSTKERNNAME} all
712 @echo "--------------------------------------------------------------"
713 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
714 @echo "--------------------------------------------------------------"
720 # Install the kernel defined by INSTALLKERNEL
722 installkernel reinstallkernel:
723 @echo "--------------------------------------------------------------"
724 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`"
725 @echo "--------------------------------------------------------------"
726 .if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run)
727 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
728 ${IMAKEENV} make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
730 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
731 make KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
737 # Build most of the user binaries on the existing system libs and includes.
740 @echo "--------------------------------------------------------------"
741 @echo ">>> Building programs only"
742 @echo "--------------------------------------------------------------"
743 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
744 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ all
750 # Install the binaries built by the 'most' target. This does not include
751 # libraries or include files.
754 @echo "--------------------------------------------------------------"
755 @echo ">>> Installing programs only"
756 @echo "--------------------------------------------------------------"
757 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
758 cd ${.CURDIR}/${_dir}; make DIRPRFX=${_dir}/ install
762 # ------------------------------------------------------------------------
764 # From here onwards are utility targets used by the 'make world' and
765 # related targets. If your 'world' breaks, you may like to try to fix
766 # the problem and manually run the following targets to attempt to
767 # complete the build. Beware, this is *not* guaranteed to work, you
768 # need to have a pretty good grip on the current state of the system
769 # to attempt to manually finish it. If in doubt, 'make world' again.
772 # bootstrap-tools: Build all tools required to build all tools. Note that
773 # order is important in a number of cases and also note that the bootstrap
774 # and build tools stages have access to earlier binaries they themselves
777 # patch: older patch's do not have -i. This program must be built
778 # first so other bootstrap tools that need to apply patches
780 # [x]install: dependancies on various new install features
781 # rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
782 # envs are not compatible with older objformat binaries.
784 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
785 _strfile= games/fortune/strfile
788 # BSTRAPDIRS1 - must be built in strict order, no parallelism
790 # order is very important. yacc before m4 before flex. flex exec's m4,
791 # m4's parser file needs the latest byacc (insanity!).
793 BSTRAPDIRS1= ${_strfile} \
795 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo \
796 bin/test bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
797 bin/hostname bin/kill \
798 usr.bin/yacc usr.bin/m4 usr.bin/colldef \
799 usr.bin/uudecode usr.bin/xinstall \
800 usr.bin/rpcgen usr.bin/bmake usr.bin/awk usr.bin/stat \
801 usr.bin/find usr.bin/flex
803 # BSTRAPDIRS2 - may built in parallel
806 usr.bin/sed usr.bin/uname usr.bin/touch \
807 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
808 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
809 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
810 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
811 usr.bin/cap_mkdb usr.bin/true usr.bin/false \
812 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
813 usr.bin/tail usr.bin/unifdef usr.bin/tic \
814 usr.sbin/chown usr.sbin/mtree usr.sbin/config \
815 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \
816 gnu/usr.bin/texinfo gnu/usr.bin/grep usr.bin/sort \
817 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb \
820 bootstrap-tools: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
821 touch ${BTOOLSDEST}/.bootstrap_done
823 bootstrap-tools-before:
824 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
826 bootstrap-tools-targets1: ${BSTRAPDIRS1:S/^/bstrap-/}
828 bootstrap-tools-targets2: ${BSTRAPDIRS2:S/^/bstrap-/}
830 .ORDER: bootstrap-tools-before bootstrap-tools-targets1 bootstrap-tools-targets2
832 .ORDER: ${BSTRAPDIRS1:S/^/bstrap-/}
834 .for _tool in ${BSTRAPDIRS1} ${BSTRAPDIRS2}
836 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
837 cd ${.CURDIR}/${_tool}; \
838 make DIRPRFX=${_tool}/ obj; \
839 make DIRPRFX=${_tool}/ depend; \
840 make DIRPRFX=${_tool}/ all; \
841 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
844 # build-tools: Build special purpose build tools.
846 # XXX we may be able to remove or consolidate this into bootstrap-tools
847 # now that we have the native helper (.nx/.no) infrastructure.
849 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
850 _share= share/syscons/scrnmaps
853 _gcc_common_cross= gnu/usr.bin/gmp gnu/usr.bin/mpfr
854 .if !defined(NO_GCC44)
855 _gcc44_cross= gnu/usr.bin/cc44
856 _gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools
858 _gcc47_cross= lib/libz gnu/usr.bin/mpc gnu/usr.bin/cc47
859 _gcc47_tools= gnu/usr.bin/cc47/cc_prep gnu/usr.bin/cc47/cc_tools
860 _custom_cross= libexec/customcc
861 _binutils= gnu/usr.bin/${WORLD_BINUTILSVER}
863 BTOOLSDIRS= ${_gcc44_tools} ${_gcc47_tools} ${_share}
865 build-tools: build-tools-targets
866 touch ${BTOOLSDEST}/.build_done
868 build-tools-targets: ${BTOOLSDIRS:S/^/btools-/}
870 .ORDER: ${_gcc44_tools:S/^/btools-/}
871 .ORDER: ${_gcc47_tools:S/^/btools-/}
873 .for _tool in ${BTOOLSDIRS}
875 ${ECHODIR} "===> ${_tool} (build-tools)"; \
876 cd ${.CURDIR}/${_tool}; \
877 make DIRPRFX=${_tool}/ obj; \
878 make DIRPRFX=${_tool}/ depend; \
879 make DIRPRFX=${_tool}/ all; \
880 make DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
884 # cross-tools: Build cross-building tools
886 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
887 _btxld= usr.sbin/btxld
890 CTOOLSDIRS= ${_btxld} ${_binutils} \
891 usr.bin/objformat usr.bin/crunch/crunchide \
892 ${_gcc_common_cross} \
893 ${_gcc44_cross} ${_gcc47_cross} ${_custom_cross}
895 cross-tools: cross-tools-targets
896 touch ${CTOOLSDEST}/.cross_done
898 cross-tools-targets: ${CTOOLSDIRS:S/^/ctools-/}
900 .for _tool in ${CTOOLSDIRS}
902 ${ECHODIR} "===> ${_tool} (cross-tools)"; \
903 cd ${.CURDIR}/${_tool}; \
904 make DIRPRFX=${_tool}/ obj; \
905 make DIRPRFX=${_tool}/ depend; \
906 make DIRPRFX=${_tool}/ all; \
907 make DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
911 # hierarchy - ensure that all the needed directories are present
914 cd ${.CURDIR}/etc; make distrib-dirs
917 # libraries - build all libraries, and install them under ${DESTDIR}.
919 # The list of libraries with dependents (${_prebuild_libs}) and their
920 # interdependencies (__L) are built automatically by the
921 # ${.CURDIR}/tools/make_libdeps.sh script.
923 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
924 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
928 HOST_CCVER=${HOST_CCVER} CCVER=gcc47 \
929 make -f Makefile.inc1 _startup_libs47;
930 .if !defined(NO_GCC44)
932 HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \
933 make -f Makefile.inc1 _startup_libs44;
936 make -f Makefile.inc1 _startup_libs; \
937 make -f Makefile.inc1 _prebuild_libs; \
938 make -f Makefile.inc1 _generic_libs;
939 touch ${WORLDDEST}/.libraries_done
941 # These dependencies are not automatically generated:
943 # gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
944 # shared libraries for ELF. The target for _startup_libsXX is
945 # specifically built using gccXX.
947 _startup_libs47= gnu/usr.bin/cc47/cc_prep \
948 gnu/usr.bin/cc47/cc_tools \
950 gnu/lib/gcc47/libgcc \
951 gnu/lib/gcc47/libgcc_eh \
952 gnu/lib/gcc47/libgcc_pic
953 _startup_libs44= gnu/usr.bin/cc44/cc_prep \
954 gnu/usr.bin/cc44/cc_tools \
957 _startup_libs= lib/csu lib/libc lib/libc_rtld
959 _prebuild_libs= lib/libbz2 lib/liblzma lib/libz
960 _prebuild_libs+= lib/libutil
962 _generic_libs= gnu/lib
964 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
965 lib/libncurses/libncurses lib/libopie
967 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
971 .if !defined(NO_CRYPT)
972 .if !defined(NO_OPENSSL)
973 _prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
974 .if !defined(NO_OPENSSH)
975 _prebuild_libs+= secure/lib/libssh
976 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
979 _generic_libs+= secure/lib
982 _prebuild_libs+= lib/libradius lib/libsbuf lib/libtacplus lib/libm \
983 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} \
984 lib/libpthread lib/libprop lib/libdevattr
986 _generic_libs+= usr.bin/flex/lib
988 .for _lib in ${_startup_libs44} ${_startup_libs47} \
989 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
991 .if exists(${.CURDIR}/${_lib})
992 ${ECHODIR} "===> ${_lib}"; \
993 cd ${.CURDIR}/${_lib}; \
994 make DIRPRFX=${_lib}/ depend; \
995 make DIRPRFX=${_lib}/ all; \
996 make DIRPRFX=${_lib}/ install
1000 _startup_libs: ${_startup_libs:S/$/__L/}
1001 _startup_libs47: ${_startup_libs47:S/$/__L/}
1002 _startup_libs44: ${_startup_libs44:S/$/__L/}
1003 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
1004 _generic_libs: ${_generic_libs:S/$/__L/}
1006 # library targets must be ordered because there are inter-library
1007 # races (e.g. generation of tconfig.h)
1009 .ORDER: ${_startup_libs47:S/$/__L/}
1010 .ORDER: ${_startup_libs44:S/$/__L/}
1011 .ORDER: ${_startup_libs:S/$/__L/}
1012 .ORDER: ${_prebuild_libs:S/$/__L/}
1013 .ORDER: ${_generic_libs:S/$/__L/}
1015 .for __target in clean cleandepend cleandir obj depend includes
1016 .for entry in ${SUBDIR}
1017 ${entry}.${__target}__D: .PHONY
1018 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
1019 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
1020 edir=${entry}.${MACHINE_ARCH}; \
1021 cd ${.CURDIR}/$${edir}; \
1023 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
1025 cd ${.CURDIR}/$${edir}; \
1027 make ${__target} DIRPRFX=${DIRPRFX}$${edir}/
1029 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
1030 .ORDER: ${SUBDIR:S/$/.${__target}__D/}
1032 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
1034 # The wmake target is used by /usr/bin/wmake to run make in a
1035 # world build environment.
1038 @echo '${WMAKEENV} make ${WMAKE_ARGS}'
1041 @echo '${WMAKEENV} /bin/sh'
1044 @echo '${BMAKEENV} make ${BMAKE_ARGS}'
1047 @echo '${BMAKEENV} /bin/sh'
1050 @echo '${TMAKEENV} make ${TMAKE_ARGS}'
1053 @echo '${TMAKEENV} /bin/sh'
1056 @echo '${XMAKEENV} make ${XMAKE_ARGS}'
1059 @echo '${XMAKEENV} /bin/sh'
1061 backupworld: backup-clean
1062 @mkdir -p ${WORLD_BACKUP}
1063 .if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1064 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1065 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1066 tar -czf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1067 --options gzip:compression-level=1 \
1068 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1072 .if !defined(NO_BACKUP)
1073 rm -f ${AUTO_BACKUP}/binaries.tar.gz
1074 @mkdir -p ${AUTO_BACKUP}
1075 .if (exists(${DESTDIR}/sbin) && exists(${DESTDIR}/bin) && \
1076 exists(${DESTDIR}/usr/sbin) && exists(${DESTDIR}/usr/bin) && \
1077 exists(${DESTDIR}/usr/lib) && exists(${DESTDIR}/usr/libexec))
1078 tar -czf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/ \
1079 --options gzip:compression-level=1 \
1080 sbin bin usr/sbin usr/bin usr/lib usr/libexec
1085 rm -f ${AUTO_BACKUP}/binaries.tar.gz
1088 rm -f ${WORLD_BACKUP}/binaries.tar.gz
1091 .if !exists(${WORLD_BACKUP}/binaries.tar.gz)
1092 @echo "There does not seem to be a valid archive present."
1094 @echo "Restoring system binaries from manual backup archive..."
1095 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1096 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1097 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1098 tar -xzf ${WORLD_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1102 .if !exists(${AUTO_BACKUP}/binaries.tar.gz)
1103 @echo "There does not seem to be a valid archive present."
1105 @echo "Restoring system binaries from auto-backup archive..."
1106 @chflags -R noschg ${DESTDIR}/sbin ${DESTDIR}/bin \
1107 ${DESTDIR}/usr/sbin ${DESTDIR}/usr/bin \
1108 ${DESTDIR}/usr/lib ${DESTDIR}/usr/libexec
1109 tar -xzf ${AUTO_BACKUP}/binaries.tar.gz -C ${DESTDIR}/
1112 # Take advantage of bmake error response
1114 MAKE_PRINT_VAR_ON_ERROR= \
1125 .include <bsd.subdir.mk>