Makefile.inc1

   1 #
   2 # $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $
   3 # $DragonFly: src/Makefile.inc1,v 1.118 2008/06/24 20:22:30 thomas Exp $
   4 #
   5 # Build-time options are documented in make.conf(5).
   6 #
   7 # The intended user-driven targets are:
   8 #
   9 # buildworld  - rebuild *everything*, including glue to help do upgrades
  10 # quickworld  - skip the glue and do a depend+build on the meat
  11 # realquickworld - skip the glue and depend stages and just build the meat
  12 # crossworld  - only build the glue (particularly the cross-build environment)
  13 # installworld- install everything built by "buildworld"
  14 # most        - build user commands, no libraries or include files
  15 # installmost - install user commands, no libraries or include files
  16 #
  17 # Standard targets (not defined here) are documented in the makefiles in
  18 # /usr/share/mk.  These include:
  19 #               obj depend all install clean cleandepend cleanobj
  20
  21 # Put initial settings here.
  22 SUBDIR=
  23
  24 # We must do share/info early so that installation of info `dir'
  25 # entries works correctly.  Do it first since it is less likely to
  26 # grow dependencies on include and lib than vice versa.
  27 .if exists(${.CURDIR}/share/info)
  28 SUBDIR+= share/info
  29 .endif
  30
  31 # We must do include and lib early so that the perl *.ph generation
  32 # works correctly as it uses the header files installed by this.
  33 .if exists(${.CURDIR}/include)
  34 SUBDIR+= include
  35 .endif
  36 .if exists(${.CURDIR}/lib)
  37 SUBDIR+= lib
  38 .endif
  39 # This exists simply to ensure that the obj dir hierarchy is
  40 # intact for nrelease, allowing the nrelease Makefile's to
  41 # reference ${.OBJDIR}.
  42 #
  43 .if exists(${.CURDIR}/nrelease)
  44 SUBDIR+= nrelease
  45 .endif
  46
  47 .if exists(${.CURDIR}/bin)
  48 SUBDIR+= bin
  49 .endif
  50 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
  51 SUBDIR+= games
  52 .endif
  53 .if exists(${.CURDIR}/gnu)
  54 SUBDIR+= gnu
  55 .endif
  56 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
  57     !defined(NO_CRYPT) && !defined(NO_OPENSSL) && defined(WANT_KERBEROS)
  58 SUBDIR+= kerberos5
  59 .endif
  60 .if exists(${.CURDIR}/libexec)
  61 SUBDIR+= libexec
  62 .endif
  63 .if exists(${.CURDIR}/sbin)
  64 SUBDIR+= sbin
  65 .endif
  66 .if exists(${.CURDIR}/secure) && !defined(NO_CRYPT)
  67 SUBDIR+= secure
  68 .endif
  69 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
  70 SUBDIR+= share
  71 .endif
  72 .if exists(${.CURDIR}/sys)
  73 SUBDIR+= sys
  74 .endif
  75 .if exists(${.CURDIR}/usr.bin)
  76 SUBDIR+= usr.bin
  77 .endif
  78 .if exists(${.CURDIR}/usr.sbin)
  79 SUBDIR+= usr.sbin
  80 .endif
  81
  82 # etc must be last for "distribute" to work
  83 .if exists(${.CURDIR}/etc)
  84 SUBDIR+= etc
  85 .endif
  86
  87 # These are last, since it is nice to at least get the base system
  88 # rebuilt before you do them.
  89 .if defined(LOCAL_DIRS)
  90 .for _DIR in ${LOCAL_DIRS}
  91 .if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
  92 SUBDIR+= ${_DIR}
  93 .endif
  94 .endfor
  95 .endif
  96
  97 .if defined(SUBDIR_OVERRIDE)
  98 SUBDIR=         ${SUBDIR_OVERRIDE}
  99 .endif
 100
 101 .if defined(NOCLEANDIR)
 102 CLEANDIR=       clean cleandepend
 103 .else
 104 CLEANDIR=       cleandir
 105 .endif
 106
 107 .if defined(NO_CLEAN)
 108 NOCLEAN=        # defined
 109 .endif
 110
 111 # Object directory base in primary make.  Note that when we rerun make
 112 # from inside this file we change MAKEOBJDIRPREFIX to the appropriate
 113 # subdirectory because the rest of the build system needs it that way.
 114 # The original object directory base is saved in OBJTREE.
 115 #
 116 MAKEOBJDIRPREFIX?=      /usr/obj
 117 OBJTREE?=               ${MAKEOBJDIRPREFIX}
 118
 119 # Used for stage installs and pathing
 120 #
 121 DESTDIRBASE?=           ${OBJTREE}${.CURDIR}
 122
 123 # Remove DESTDIR from MAKEFLAGS.  It is present in the environment
 124 # anyhow, and we need to be able to override it for stage installs
 125 .MAKEFLAGS:=    ${.MAKEFLAGS:NDESTDIR=*}
 126
 127 TARGET_ARCH?=   ${MACHINE_ARCH}
 128 .if ${TARGET_ARCH} == ${MACHINE_ARCH}
 129 TARGET?=        ${MACHINE}
 130 .else
 131 TARGET?=        ${TARGET_ARCH}
 132 .endif
 133 .if make(buildworld)
 134 BUILD_ARCH!=    sysctl -n hw.machine_arch
 135 .if ${MACHINE_ARCH} != ${BUILD_ARCH}
 136 .error To cross-build, set TARGET_ARCH.
 137 .endif
 138 .endif
 139
 140 # Backwards compatibility with older make's or older sys.mk's.  make
 141 # is expected to define MACHINE_PLATFORM.
 142 #
 143 .if !defined(MACHINE_PLATFORM)
 144 MACHINE_PLATFORM= pc32
 145 .endif
 146
 147 # XXX this is ugly and we need to come up with a nicer solution
 148 .if !defined(TARGET_PLATFORM)
 149 .if ${TARGET_ARCH} == "i386"
 150 TARGET_PLATFORM= pc32
 151 .elif ${TARGET_ARCH} == "amd64"
 152 TARGET_PLATFORM= pc64
 153 .else
 154 .error Unknown target architecture.
 155 .endif
 156 .endif
 157
 158 THREAD_LIB?=    thread_xu
 159 .if ${THREAD_LIB} == "c_r"
 160 .if defined(NO_LIBC_R)
 161 .error libc_r is chosen as the default thread library, but NO_LIBC_R is defined
 162 .endif
 163 .endif
 164
 165 # BTOOLS        (Natively built) All non-cross-development tools that the
 166 #               main build needs.  This includes things like 'mkdir' and 'rm'.
 167 #               We will not use the native system's exec path once we start
 168 #               on WORLD.  (bootstrap-tools and build-tools or BTOOLS)
 169 #
 170 # CTOOLS        (Natively built) Cross development tools which are specific
 171 #               to the target architecture.
 172 #
 173 # WORLD         (Cross built) Our ultimate buildworld, using only BTOOLS and
 174 #               CTOOLS.
 175 #
 176 # MACHINE_PLATFORM Platform Architecture we are building on
 177 # MACHINE       Machine Architecture (usually the same as MACHINE_ARCH)
 178 # MACHINE_ARCH  Cpu Architecture we are building on
 179 #
 180 # TARGET_PLATFORM Platform Architecture we are building for
 181 # TARGET        Machine Architecture we are building for
 182 # TARGET_ARCH   Cpu Architecture we are building for
 183 #
 184 BTOOLSDEST=     ${DESTDIRBASE}/btools_${MACHINE_ARCH}
 185 CTOOLSDEST=     ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH}
 186 WORLDDEST=      ${DESTDIRBASE}/world_${TARGET_ARCH}
 187
 188 # The bootstrap-tools path is used by the bootstrap-tools, build-tools, and
 189 # cross-tools stages to augment the existing command path to access newer
 190 # versions of certain utilities such as 'patch' that the cross-tools stage
 191 # might expect.
 192 #
 193 BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
 194
 195 # The strict temporary command path contains all binaries required
 196 # by the buildworld system after the cross-tools stage.
 197 #
 198 STRICTTMPPATH=  ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games
 199
 200 TMPDIR?=        /tmp
 201 TMPPID!=        echo $$$$
 202
 203 #
 204 # Building a world goes through the following stages
 205 #
 206 # 1. bootstrap-tool stage [BMAKE]
 207 #       This stage is responsible for creating programs that
 208 #       are needed for backward compatibility reasons. They
 209 #       are not built as cross-tools.
 210 # 2. build-tool stage [TMAKE]
 211 #       This stage is responsible for creating the object
 212 #       tree and building any tools that are needed during
 213 #       the build process.
 214 # 3. cross-tool stage [XMAKE]
 215 #       This stage is responsible for creating any tools that
 216 #       are needed for cross-builds. A cross-compiler is one
 217 #       of them.
 218 # 4. world stage [WMAKE]
 219 #       This stage actually builds the world.
 220 # 5. install stage (optional) [IMAKE]
 221 #       This stage installs a previously built world.
 222 #
 223
 224 # bootstrap-tool stage
 225 #
 226 BMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 227                 OBJTREE=${OBJTREE} \
 228                 DESTDIR=${BTOOLSDEST} \
 229                 PATH=${BTOOLSPATH}:${PATH} \
 230                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 231
 232 BMAKE=          ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 233                 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
 234                 -DNO_WERROR -DNO_NLS
 235
 236 # build-tool stage
 237 #
 238 TMAKEENV=       MAKEOBJDIRPREFIX=${BTOOLSDEST} \
 239                 OBJTREE=${OBJTREE} \
 240                 DESTDIR= \
 241                 PATH=${BTOOLSPATH}:${PATH} \
 242                 INSTALL="sh ${.CURDIR}/tools/install.sh"
 243
 244 TMAKE=          ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
 245                 -DNO_FORTRAN -DNOSHARED
 246
 247 # cross-tool stage
 248 #
 249 # note: TOOLS_PREFIX points to the obj root holding the cross
 250 #       compiler binaries, while USRDATA_PREFIX points to the obj root
 251 #       holding the target environment (and also determines where cross-built
 252 #       libraries, crt*.o, and include files are installed).
 253 #
 254 XMAKEENV=       MAKEOBJDIRPREFIX=${CTOOLSDEST} \
 255                 OBJTREE=${OBJTREE} \
 256                 DESTDIR=${CTOOLSDEST} \
 257                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 258                 TOOLS_PREFIX=${CTOOLSDEST} \
 259                 USRDATA_PREFIX=${WORLDDEST} \
 260                 PATH=${BTOOLSPATH}:${PATH}
 261
 262 XMAKE=          ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \
 263                 -DBOOTSTRAPPING -DNOSHARED
 264
 265 # world stage, note the strict path and note that TOOLS_PREFIX is left
 266 # unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty,
 267 # which is primarily for the compiler so it targets / (e.g. /usr/<blah>)
 268 # for both binary and library paths, even though it is being compiled to
 269 # WORLDDEST.  None of the programs in the world stage are ever actually
 270 # executed during the buildworld/installworld.
 271 #
 272 CROSSENV=       MAKEOBJDIRPREFIX=${WORLDDEST} \
 273                 OBJTREE=${OBJTREE} \
 274                 MACHINE_ARCH=${TARGET_ARCH} \
 275                 MACHINE=${TARGET} \
 276                 MACHINE_PLATFORM=${TARGET_PLATFORM} \
 277                 OBJFORMAT_PATH=${CTOOLSDEST}
 278
 279 WMAKEENV=       ${CROSSENV} \
 280                 DESTDIR=${WORLDDEST} \
 281                 INSTALL="sh ${.CURDIR}/tools/install.sh" \
 282                 PATH=${STRICTTMPPATH}
 283
 284 WMAKE=          ${WMAKEENV} ${MAKE} -f Makefile.inc1
 285
 286 # install stage
 287 #
 288 IMAKEENV=       ${CROSSENV} \
 289                 PATH=${STRICTTMPPATH}
 290 IMAKE=          ${IMAKEENV} ${MAKE} -f Makefile.inc1
 291
 292 # kernel stage
 293 #
 294 KMAKEENV=       ${WMAKEENV}
 295
 296 # buildworld
 297 #
 298 # Attempt to rebuild the entire system, with reasonable chance of
 299 # success, regardless of how old your existing system is.
 300 #
 301 _worldtmp:
 302         @echo
 303         @echo "--------------------------------------------------------------"
 304         @echo ">>> Rebuilding the temporary build tree"
 305         @echo "--------------------------------------------------------------"
 306 .if !defined(NOCLEAN)
 307         rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 308 .else
 309         # XXX - These two can depend on any header file.
 310         rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
 311         rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
 312 .endif
 313         mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST}
 314 .for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST}
 315         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist        \
 316                 -p ${_dir}/  > /dev/null
 317         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist         \
 318                 -p ${_dir}/usr > /dev/null
 319 .endfor
 320         mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist     \
 321                 -p ${WORLDDEST}/usr/include > /dev/null
 322         ${LN} -sf ${.CURDIR}/sys ${WORLDDEST}
 323
 324 _bootstrap-tools:
 325         @echo
 326         @echo "--------------------------------------------------------------"
 327         @echo ">>> stage 1: bootstrap tools"
 328         @echo "--------------------------------------------------------------"
 329         cd ${.CURDIR}; ${BMAKE} bootstrap-tools
 330 _cleanobj:
 331         @echo
 332         @echo "--------------------------------------------------------------"
 333         @echo ">>> stage 2a: cleaning up the object tree"
 334         @echo "--------------------------------------------------------------"
 335         cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
 336 _obj:
 337         @echo
 338         @echo "--------------------------------------------------------------"
 339         @echo ">>> stage 2b: rebuilding the object tree"
 340         @echo "--------------------------------------------------------------"
 341         cd ${.CURDIR}; ${WMAKE} par-obj
 342 _build-tools:
 343         @echo
 344         @echo "--------------------------------------------------------------"
 345         @echo ">>> stage 2c: build tools"
 346         @echo "--------------------------------------------------------------"
 347         cd ${.CURDIR}; ${TMAKE} build-tools
 348 _cross-tools:
 349         @echo
 350         @echo "--------------------------------------------------------------"
 351         @echo ">>> stage 3: cross tools"
 352         @echo "--------------------------------------------------------------"
 353         cd ${.CURDIR}; ${XMAKE} cross-tools
 354 _includes:
 355         @echo
 356         @echo "--------------------------------------------------------------"
 357         @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include"
 358         @echo "--------------------------------------------------------------"
 359         cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
 360 _libraries:
 361         @echo
 362         @echo "--------------------------------------------------------------"
 363         @echo ">>> stage 4b: building libraries"
 364         @echo "--------------------------------------------------------------"
 365         cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
 366 _depend:
 367         @echo
 368         @echo "--------------------------------------------------------------"
 369         @echo ">>> stage 4c: make dependencies"
 370         @echo "--------------------------------------------------------------"
 371         cd ${.CURDIR}; ${WMAKE} par-depend
 372 everything:
 373         @echo
 374         @echo "--------------------------------------------------------------"
 375         @echo ">>> stage 4d: building everything.."
 376         @echo "--------------------------------------------------------------"
 377         cd ${.CURDIR}; ${WMAKE} all
 378
 379 # note: buildworld no longer depends on _cleanobj because we rm -rf the
 380 # entire object tree and built the bootstrap tools in a different location.
 381 #
 382 # buildworld    - build everything from scratch
 383 # quickworld    - skip the bootstrap, build, and cross-build steps
 384 # realquickworld - skip the bootstrap, build, crossbuild, and depend step.
 385 #
 386 # note: we include _obj in realquickworld to prevent accidental creation
 387 # of files in /usr/src.
 388
 389 WMAKE_TGTS=
 390 .if !defined(SUBDIR_OVERRIDE)
 391 WMAKE_TGTS+=    _worldtmp _bootstrap-tools
 392 .endif
 393 WMAKE_TGTS+=    _obj _build-tools
 394 .if !defined(SUBDIR_OVERRIDE)
 395 WMAKE_TGTS+=    _cross-tools
 396 .endif
 397 WMAKE_TGTS+=    _includes _libraries _depend everything
 398
 399 buildworld: ${WMAKE_TGTS}
 400
 401 quickworld: _obj _includes _libraries _depend everything
 402
 403 realquickworld: _obj _includes _libraries everything
 404
 405 crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools
 406
 407 .ORDER: ${WMAKE_TGTS}
 408
 409 #
 410 # installcheck
 411 #
 412 # Checks to be sure system is ready for installworld
 413 #
 414 installcheck:
 415 .if !defined(NO_SENDMAIL)
 416         @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
 417         @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1)
 418 .endif
 419         @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
 420         @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; exit 1)
 421         @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1)
 422 .if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/"
 423         @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; exit 1;; esac
 424 .endif
 425 # distributeworld
 426 #
 427 # Distributes everything compiled by a `buildworld'.
 428 #
 429 # installworld
 430 #
 431 # Installs everything compiled by a 'buildworld'.
 432 #
 433 distributeworld installworld: installcheck
 434         cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
 435         ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/
 436
 437 #
 438 # reinstall
 439 #
 440 # If you have a build server, you can NFS mount the source and obj directories
 441 # and do a 'make reinstall' on the *client* to install new binaries from the
 442 # most recent server build.
 443 #
 444 reinstall:
 445         @echo "--------------------------------------------------------------"
 446         @echo ">>> Making hierarchy"
 447         @echo "--------------------------------------------------------------"
 448         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
 449         @echo
 450         @echo "--------------------------------------------------------------"
 451         @echo ">>> Installing everything.."
 452         @echo "--------------------------------------------------------------"
 453         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
 454 .if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
 455         @echo
 456         @echo "--------------------------------------------------------------"
 457         @echo ">>> Rebuilding man page indices"
 458         @echo "--------------------------------------------------------------"
 459         cd ${.CURDIR}/share/man; ${MAKE} makedb
 460 .endif
 461
 462 redistribute:
 463         @echo "--------------------------------------------------------------"
 464         @echo ">>> Distributing everything.."
 465         @echo "--------------------------------------------------------------"
 466         cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
 467
 468 #
 469 # buildkernel, nativekernel, quickkernel, and installkernel
 470 #
 471 # Which kernels to build and/or install is specified by setting
 472 # KERNCONF. If not defined a GENERIC kernel is built/installed.
 473 # Only the existing (depending TARGET) config files are used
 474 # for building kernels and only the first of these is designated
 475 # as the one being installed.
 476 #
 477 # You can specify INSTALLSTRIPPED=1 if you wish the installed
 478 # kernel and modules to be stripped of its debug info (required
 479 # symbols are left intact).  You can specify INSTALLSTRIPPEDMODULES
 480 # if you only want to strip the modules of their debug info.  These
 481 # only apply if you have DEBUG=-g in your kernel config or make line.
 482 #
 483 # Note that we have to use TARGET instead of TARGET_ARCH when
 484 # we're in kernel-land. Since only TARGET_ARCH is (expected) to
 485 # be set to cross-build, we have to make sure TARGET is set
 486 # properly.
 487
 488 .if !defined(KERNCONF) && defined(KERNEL)
 489 KERNCONF=       ${KERNEL}
 490 KERNWARN=       yes
 491 .else
 492 KERNCONF?=      GENERIC
 493 .endif
 494 INSTKERNNAME?=  kernel
 495
 496 KRNLSRCDIR=     ${.CURDIR}/sys
 497 KRNLCONFDIR=    ${KRNLSRCDIR}/config
 498 KRNLOBJDIR=     ${OBJTREE}${KRNLSRCDIR}
 499 KERNCONFDIR?=   ${KRNLCONFDIR}
 500
 501 BUILDKERNELS=
 502 INSTALLKERNEL=
 503 .for _kernel in ${KERNCONF}
 504 .if exists(${KERNCONFDIR}/${_kernel})
 505 BUILDKERNELS+=  ${_kernel}
 506 .if empty(INSTALLKERNEL)
 507 INSTALLKERNEL= ${_kernel}
 508 .endif
 509 .endif
 510 .endfor
 511
 512 # kernel version numbers survive rm -rf
 513 #
 514 .for _kernel in ${BUILDKERNELS}
 515 .if exists(${KRNLOBJDIR}/${_kernel}/version)
 516 KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version
 517 .endif
 518 .endfor
 519
 520 #
 521 # buildkernel
 522 #
 523 # Builds all kernels defined by BUILDKERNELS.
 524 #
 525 bk_tools:
 526         @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 527             echo "You must buildworld before buildkernel.  If you wish"; \
 528             echo "to build a kernel using native tools, config it manually"; \
 529             echo "or use the nativekernel target if you are in a rush"; \
 530             exit 1; \
 531         fi
 532
 533 maybe_bk_tools:
 534 .for _kernel in ${BUILDKERNELS}
 535         @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 536             if [ ! -f ${WORLDDEST}/.libraries_done ]; then \
 537                 echo "The kernel was build using buildworld tools which no" ; \
 538                 echo "longer appear to exist, quickkernel failed!" ; \
 539                 exit 1; \
 540             fi; \
 541         fi
 542 .endfor
 543
 544 bk_build_list:
 545 .if empty(BUILDKERNELS)
 546         @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
 547         @echo ">>> Did you move your kernel configs from i386/conf to config/?"
 548         @false
 549 .endif
 550
 551 bk_kernwarn:
 552 .if defined(KERNWARN)
 553         @echo "--------------------------------------------------------------"
 554         @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
 555         @echo "--------------------------------------------------------------"
 556         @sleep 3
 557 .endif
 558         @echo
 559
 560 # The buildkernel target rebuilds the specified kernels from scratch
 561 # using the crossbuild tools generated by the last buildworld.  It is
 562 # the safest (but also the most time consuming) way to build a new kernel.
 563 #
 564 buildkernel:    bk_tools bk_build_list bk_kernwarn
 565 .for _kernel in ${BUILDKERNELS}
 566         @echo "--------------------------------------------------------------"
 567         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 568         @echo "--------------------------------------------------------------"
 569         @echo "===> ${_kernel}"
 570 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 571         rm -rf ${KRNLOBJDIR}/${_kernel}
 572 .else
 573         @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \
 574                 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \
 575                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 576 .endif
 577         mkdir -p ${KRNLOBJDIR}
 578 .if !defined(NO_KERNELCONFIG)
 579         cd ${KRNLCONFDIR}; \
 580                 PATH=${STRICTTMPPATH} \
 581                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 582                         ${KERNCONFDIR}/${_kernel}
 583 .endif
 584 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
 585         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
 586 .endif
 587         touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run
 588         cd ${KRNLOBJDIR}/${_kernel}; \
 589             MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
 590             ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
 591 .if !defined(NO_KERNELDEPEND)
 592         cd ${KRNLOBJDIR}/${_kernel}; \
 593             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
 594 .endif
 595         cd ${KRNLOBJDIR}/${_kernel}; \
 596             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 597         @echo "--------------------------------------------------------------"
 598         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 599         @echo "--------------------------------------------------------------"
 600 .endfor
 601
 602 # The nativekernel target rebuilds the specified kernels from scratch
 603 # using the system's standard compiler rather than using the crossbuild
 604 # tools generated by the last buildworld.  This is fairly safe if your
 605 # system is reasonable up-to-date.
 606 #
 607 nativekernel:   bk_build_list bk_kernwarn
 608 .for _kernel in ${BUILDKERNELS}
 609         @echo "--------------------------------------------------------------"
 610         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 611         @echo "--------------------------------------------------------------"
 612         @echo "===> ${_kernel}"
 613 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
 614         rm -rf ${KRNLOBJDIR}/${_kernel}
 615 .else
 616         @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \
 617                 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \
 618                 rm -rf ${KRNLOBJDIR}/${_kernel}; fi
 619 .endif
 620         mkdir -p ${KRNLOBJDIR}
 621 .if !defined(NO_KERNELCONFIG)
 622         cd ${KRNLCONFDIR}; \
 623                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 624                         ${KERNCONFDIR}/${_kernel}
 625 .endif
 626 .if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel})
 627         echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version
 628 .endif
 629         touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run
 630         cd ${KRNLOBJDIR}/${_kernel}; \
 631             MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \
 632             ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile
 633 .if !defined(NO_KERNELDEPEND)
 634         cd ${KRNLOBJDIR}/${_kernel}; \
 635             ${MAKE} KERNEL=${INSTKERNNAME} depend
 636 .endif
 637         cd ${KRNLOBJDIR}/${_kernel}; \
 638             ${MAKE} KERNEL=${INSTKERNNAME} all
 639         @echo "--------------------------------------------------------------"
 640         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 641         @echo "--------------------------------------------------------------"
 642 .endfor
 643
 644 # The quickkernel target rebuilds the specified kernels as quickly
 645 # as possible.  It will use the native tools or the buildworld cross tools
 646 # based on whether the kernel was originally generated via buildkernel or
 647 # nativekernel.  Config is rerun but the object hierarchy is not rebuilt,
 648 # nor is the make depend step run.
 649 #
 650 quickkernel:    maybe_bk_tools bk_build_list bk_kernwarn
 651 .for _kernel in ${BUILDKERNELS}
 652         @echo "--------------------------------------------------------------"
 653         @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
 654         @echo "--------------------------------------------------------------"
 655         @echo "===> ${_kernel}"
 656 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
 657 .if !defined(NO_KERNELCONFIG)
 658         cd ${KRNLCONFDIR}; \
 659                 PATH=${STRICTTMPPATH} \
 660                     config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 661                         ${KERNCONFDIR}/${_kernel}
 662 .endif
 663         cd ${KRNLOBJDIR}/${_kernel}; \
 664             ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
 665 .else
 666 .if !defined(NO_KERNELCONFIG)
 667         cd ${KRNLCONFDIR}; \
 668             config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
 669                 ${KERNCONFDIR}/${_kernel}
 670 .endif
 671         cd ${KRNLOBJDIR}/${_kernel}; \
 672             ${MAKE} KERNEL=${INSTKERNNAME} all
 673 .endif
 674         @echo "--------------------------------------------------------------"
 675         @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
 676         @echo "--------------------------------------------------------------"
 677 .endfor
 678
 679
 680 # installkernel
 681 #
 682 # Install the kernel defined by INSTALLKERNEL
 683 #
 684 installkernel reinstallkernel:
 685 .if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run)
 686         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 687             ${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 688 .else
 689         cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
 690             ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
 691 .endif
 692
 693 #
 694 # most
 695 #
 696 # Build most of the user binaries on the existing system libs and includes.
 697 #
 698 most:
 699         @echo "--------------------------------------------------------------"
 700         @echo ">>> Building programs only"
 701         @echo "--------------------------------------------------------------"
 702 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
 703         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ all
 704 .endfor
 705
 706 #
 707 # installmost
 708 #
 709 # Install the binaries built by the 'most' target.  This does not include
 710 # libraries or include files.
 711 #
 712 installmost:
 713         @echo "--------------------------------------------------------------"
 714         @echo ">>> Installing programs only"
 715         @echo "--------------------------------------------------------------"
 716 .for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
 717         cd ${.CURDIR}/${_dir};          ${MAKE} DIRPRFX=${_dir}/ install
 718 .endfor
 719
 720 #
 721 # ------------------------------------------------------------------------
 722 #
 723 # From here onwards are utility targets used by the 'make world' and
 724 # related targets.  If your 'world' breaks, you may like to try to fix
 725 # the problem and manually run the following targets to attempt to
 726 # complete the build.  Beware, this is *not* guaranteed to work, you
 727 # need to have a pretty good grip on the current state of the system
 728 # to attempt to manually finish it.  If in doubt, 'make world' again.
 729 #
 730
 731 # bootstrap-tools: Build all tools required to build all tools.  Note that
 732 # order is important in a number of cases and also note that the bootstrap
 733 # and build tools stages have access to earlier binaries they themselves
 734 # had generated.
 735 #
 736 # patch:        older patch's do not have -i.  This program must be built
 737 #               first so other bootstrap tools that need to apply patches
 738 #               can use it.
 739 # [x]install:   dependancies on various new install features
 740 # rpcgen:       old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH
 741 #               envs are not compatible with older objformat binaries.
 742 #
 743 .if exists(${.CURDIR}/games) && !defined(NO_GAMES)
 744 _strfile=       games/fortune/strfile
 745 .endif
 746
 747 bootstrap-tools:
 748         ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date
 749 .for _tool in ${_strfile} \
 750     usr.bin/patch \
 751     bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo bin/test \
 752     bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \
 753     bin/hostname bin/kill \
 754     usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \
 755     usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/stat \
 756     usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \
 757     usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \
 758     usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \
 759     usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \
 760     usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \
 761     usr.bin/cap_mkdb usr.bin/true usr.bin/false \
 762     usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \
 763     usr.bin/tail \
 764     usr.sbin/chown usr.sbin/mtree usr.sbin/config \
 765     usr.sbin/btxld usr.sbin/pwd_mkdb usr.sbin/zic usr.sbin/makewhatis \
 766     gnu/usr.bin/texinfo gnu/usr.bin/grep gnu/usr.bin/sort \
 767     usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb
 768         ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \
 769                 cd ${.CURDIR}/${_tool}; \
 770                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 771                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 772                 ${MAKE} DIRPRFX=${_tool}/ all; \
 773                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 774 .endfor
 775         touch ${BTOOLSDEST}/.bootstrap_done
 776
 777 # build-tools: Build special purpose build tools.
 778 #
 779 # XXX we may be able to remove or consolidate this into bootstrap-tools
 780 # now that we have the native helper (.nx/.no) infrastructure.
 781 #
 782 .if exists(${.CURDIR}/share) && !defined(NO_SHARE)
 783 _share= share/syscons/scrnmaps
 784 .endif
 785
 786 .if !defined(NO_GCC34)
 787 _gcc34_cross= gnu/usr.bin/cc34
 788 _gcc34_tools= gnu/usr.bin/cc34/cc_prep gnu/usr.bin/cc34/cc_tools
 789 .endif
 790 _gcc41_cross= gnu/usr.bin/cc41
 791 _gcc41_tools= gnu/usr.bin/cc41/cc_prep gnu/usr.bin/cc41/cc_tools
 792 _binutils= gnu/usr.bin/binutils217
 793
 794 .if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
 795     !defined(NO_CRYPT) && defined(WANT_KERBEROS)
 796 _libkrb5= kerberos5/tools kerberos5/lib/libroken kerberos5/lib/libvers \
 797     kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
 798 .endif
 799
 800 build-tools:
 801 .for _tool in ${_gcc34_tools} ${_gcc41_tools} ${_libkrb5} ${_share}
 802         ${ECHODIR} "===> ${_tool} (build-tools)"; \
 803                 cd ${.CURDIR}/${_tool}; \
 804                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 805                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 806                 ${MAKE} DIRPRFX=${_tool}/ all; \
 807                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install
 808 .endfor
 809         touch ${BTOOLSDEST}/.build_done
 810
 811 #
 812 # cross-tools: Build cross-building tools
 813 #
 814 .if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
 815 _btxld= usr.sbin/btxld
 816 .endif
 817
 818 cross-tools:
 819 .for _tool in ${_btxld} ${_binutils} \
 820               usr.bin/objformat usr.sbin/crunch/crunchide \
 821               ${_gcc34_cross} ${_gcc41_cross}
 822         ${ECHODIR} "===> ${_tool} (cross-tools)"; \
 823                 cd ${.CURDIR}/${_tool}; \
 824                 ${MAKE} DIRPRFX=${_tool}/ obj; \
 825                 ${MAKE} DIRPRFX=${_tool}/ depend; \
 826                 ${MAKE} DIRPRFX=${_tool}/ all; \
 827                 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install
 828 .endfor
 829         touch ${CTOOLSDEST}/.cross_done
 830
 831 #
 832 # hierarchy - ensure that all the needed directories are present
 833 #
 834 hierarchy:
 835         cd ${.CURDIR}/etc;              ${MAKE} distrib-dirs
 836
 837 #
 838 # libraries - build all libraries, and install them under ${DESTDIR}.
 839 #
 840 # The list of libraries with dependents (${_prebuild_libs}) and their
 841 # interdependencies (__L) are built automatically by the
 842 # ${.CURDIR}/tools/make_libdeps.sh script.
 843 #
 844 # .makeenv does not work when bootstrapping from 4.x, so we must be sure
 845 # to specify the correct CCVER or 'cc' will not exec the correct compiler.
 846 #
 847 libraries:
 848 .if !defined(NO_GCC34)
 849         cd ${.CURDIR}; \
 850             HOST_CCVER=${HOST_CCVER} CCVER=gcc34 \
 851                 ${MAKE} -f Makefile.inc1 _startup_libs34;
 852 .endif
 853         cd ${.CURDIR}; \
 854             HOST_CCVER=${HOST_CCVER} CCVER=gcc41 \
 855                 ${MAKE} -f Makefile.inc1 _startup_libs41;
 856         cd ${.CURDIR}; \
 857             ${MAKE} -f Makefile.inc1 _startup_libs; \
 858             ${MAKE} -f Makefile.inc1 _prebuild_libs; \
 859             ${MAKE} -f Makefile.inc1 _generic_libs;
 860         touch ${WORLDDEST}/.libraries_done
 861
 862 # These dependencies are not automatically generated:
 863 #
 864 # gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all
 865 # shared libraries for ELF.  The target for _startup_libs34 is
 866 # specifically built using gcc34.  Same goes for _startup_libs41.
 867 #
 868 _startup_libs34=        gnu/lib/gcc34/csu gnu/lib/gcc34/libgcc
 869 _startup_libs41=        gnu/lib/gcc41/csu gnu/lib/gcc41/libgcc
 870 _startup_libs=          lib/libc lib/libc_rtld
 871
 872 _prebuild_libs=         lib/libbz2 lib/libz lib/libarchive
 873 _prebuild_libs+=        lib/libutil
 874
 875 _generic_libs=  gnu/lib
 876
 877 .if !defined(NO_CRYPT) && defined(WANT_KERBEROS)
 878 _prebuild_libs+=        kerberos5/tools
 879 _prebuild_libs+=        kerberos5/lib/libasn1
 880 _prebuild_libs+=        kerberos5/lib/libgssapi
 881 _prebuild_libs+=        kerberos5/lib/libkrb5
 882 _prebuild_libs+=        kerberos5/lib/libroken
 883 _generic_libs+= kerberos5/lib
 884 .endif
 885
 886 _prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
 887                 lib/libncurses/libncurses lib/libopie lib/libradius \
 888                 lib/libsbuf lib/libskey lib/libtacplus lib/libm \
 889                 lib/libpam lib/lib${THREAD_LIB}
 890
 891 lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
 892 lib/libskey__L: lib/libcrypt__L lib/libmd__L
 893
 894 _generic_libs+= lib
 895
 896 .if !defined(NO_CRYPT)
 897 .if !defined(NO_OPENSSL)
 898 _prebuild_libs+=        secure/lib/libcrypto secure/lib/libssl
 899 .if !defined(NO_OPENSSH)
 900 _prebuild_libs+=        secure/lib/libssh
 901 secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
 902 .endif
 903 .endif
 904 _generic_libs+= secure/lib
 905 .endif
 906
 907 _generic_libs+= usr.bin/lex/lib
 908
 909 .for _lib in ${_startup_libs34} ${_startup_libs41} \
 910                 ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
 911 ${_lib}__L: .PHONY
 912 .if exists(${.CURDIR}/${_lib})
 913         ${ECHODIR} "===> ${_lib}"; \
 914                 cd ${.CURDIR}/${_lib}; \
 915                 ${MAKE} DIRPRFX=${_lib}/ depend; \
 916                 ${MAKE} DIRPRFX=${_lib}/ all; \
 917                 ${MAKE} DIRPRFX=${_lib}/ install
 918 .endif
 919 .endfor
 920
 921 _startup_libs: ${_startup_libs:S/$/__L/}
 922 _startup_libs34: ${_startup_libs34:S/$/__L/}
 923 _startup_libs41: ${_startup_libs41:S/$/__L/}
 924 _prebuild_libs: ${_prebuild_libs:S/$/__L/}
 925 _generic_libs: ${_generic_libs:S/$/__L/}
 926
 927 # library targets must be ordered because there are inter-library
 928 # races (e.g. generation of tconfig.h)
 929 #
 930 .ORDER: ${_startup_libs34:S/$/__L/}
 931 .ORDER: ${_startup_libs41:S/$/__L/}
 932 .ORDER: ${_startup_libs:S/$/__L/}
 933 .ORDER: ${_prebuild_libs:S/$/__L/}
 934 .ORDER: ${_generic_libs:S/$/__L/}
 935
 936 .for __target in clean cleandepend cleandir obj depend includes
 937 .for entry in ${SUBDIR}
 938 ${entry}.${__target}__D: .PHONY
 939         @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
 940                 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
 941                 edir=${entry}.${MACHINE_ARCH}; \
 942                 cd ${.CURDIR}/$${edir}; \
 943         else \
 944                 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \
 945                 edir=${entry}; \
 946                 cd ${.CURDIR}/$${edir}; \
 947         fi; \
 948         ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
 949 .endfor
 950 par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
 951 .ORDER: ${SUBDIR:S/$/.${__target}__D/}
 952 .endfor
 953 .ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes
 954
 955 # The wmake target is used by /usr/bin/wmake to run make in a
 956 # world build environment.
 957 #
 958 wmake:
 959         @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}'
 960
 961 wmakeenv:
 962         @echo '${WMAKEENV} /bin/sh'
 963
 964 bmake:
 965         @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}'
 966
 967 bmakeenv:
 968         @echo '${BMAKEENV} /bin/sh'
 969
 970 tmake:
 971         @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}'
 972
 973 tmakeenv:
 974         @echo '${TMAKEENV} /bin/sh'
 975
 976 .include <bsd.subdir.mk>
 977